DIGI SINGAPORE IB3100 Base Station User Manual Manual

Teraoka Weigh-System Pte Ltd. Base Station Manual

Manual

     Trademark: DIGI Model Name: IB-3100 Product Name: Base Station
2006/8/16 v1.0Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.
Index[GENERAL INFORMATION] [PRODUCT INFORMATION][TYPICAL OPERATION][INFO SERVER ADMINISTRATOR MENU][INFO PAD ADMINISTRATOR MENU] [CONTENTS]USER MANUALDigi Info ESL Tentative 04Ver. 0.18.080122.1 (Updated on 15/03/08)
INFO SERVER ADMINISTRATOR MENU[Home]Info Server Administrator Menu is used by store people to do daily maintenance e.g. retrieves tag data, senddisplay, sticker printing and etc. To use these operations (e.g. send display, sticker printing and etc), it isrequired for the user to program/design setting/format in the Info Server Serviceman Menu Screen inadvance.PRICE TAGLISTING ITEMMANUAL KEY IN BARCODE DATA
PRICE TAG[Home] [Up]Price Tag is used to view data/values that displayed on tag for each item, to print sticker and update data tosingle tag each time.ENTRY TO PRICE TAGOVERVIEW OF PRICE TAG
ENTRY TO PRICE TAG[Home] [Up]1. At the Info Cast Main Screen2. Press [ADMIN] button to enter to Administrator Menu and enter to Price Tag screenNote:No"User Name"or"Password"required using this mode.
~ OR ~1. During in other screen2. Press[PRICE TAG]button to go toPrice Tag screen
3. Do operations as desired
OVERVIEW OF PRICE TAG[Home] [Up]1. EANTo search item by a EAN code (European article number)Scan barcode or enter value by keyboard and press [DISPLAY] button to search entered item dataNote: To enter value by keyboard, user are required to follow Manual Key-in Barcode Data table2. Link IDTo search item by a Link ID codePress [SEARCH] button to search entered item data3. Sales PriceDisplay Sales Price of the searched item
4.Item NameDisplay item name of the searched item5. Tag Display ScreenDisplay searched item data on the Tag Display (depend on the tag format)Able to view 3 screen of tag for each itema) ActiveTo view the data and value displayed in active screenPress [Active] Tab/button to view the active screenb) 1st ScreenTo view the data and value displayed in 1st screenPress [1ST SCREEN] Tab/button to view the 1st screen
c) 2nd ScreenTo view the data and value displayed in 2nd screenPress [2ND SCREEN] Tab/button to view the 2nd screen
d) Promo ScreenTo view the data and value displayed in promotion screenPress [PROMO SCREEN] Tab/button to view the promo screen6. Send DisplayPress [SEND DISPLAY] button to enter Send Display screen
To resend item data to tag, this function is useful when the tag is hang or display incomplete dataPress [BACK] button to exit Send Display screen and return to price tag main screena) [SEND 1ST W/O SYMBOL] button - to send the 1stscreen numeric/digits data, without symbol e.g.decimal point, Sales message and etc to selected tagb) [SEND 1ST W/ SYMBOL] button - to send the 1stscreen numeric/digits data, with symbol e.g. decimalpoint, Sales message and etc to selected tagc) [SEND 2ND SCREEN] button - to send the 2nd screen to selected tag7. PrintingTo print sticker or paper tag for the selected itemPress [PRINTING] button to enter Sticker & Paper Tag Printing screen
Press [BACK] button to exit Sticker & Paper Tag Printing screen and return to price tag main screena) [PRINT] button - to print sticker or paper tag for selected itemb) [STICKER TYPE] selection - to select available sticker type for printingNote: Sticker type is required to be programmed in Sticker/Paper Tag Format Design inadvance8. Blinking ScreenTo set selected tag to blink tag displayed dataPress [BLINKING SCREEN] button to enter Blinking Screen mode screen
Press [BACK] button to exit Blinking Screen mode screen and return to price tag main screena) [START] button - to start blinking tag displayb) [STOP] button - to stop blinking tag displayc) [SCREEN NUMBER] selection - to select page of tag to be displayed after stop blinkingoperationNote1: Press button, to select data from available listNote2: Click box to enter desired dataNote3: Press [CLEAR] button to clear data retrieved or enteredNote3:press button, to exit from Maintenance screen, Price/Transaction Maintenance screen.
LISTING ITEM[Home] [Up]Listing Item is used to search data, to check error log, to print sticker and update data to multiple price tag.ENTRY TO LISTING ITEMOVERVIEW OF LISTING ITEM
ENTRY TO LISTING ITEM[Home] [Up]1. At the Info Cast Main ScreenNote: No "User Name" or "Password" required using this mode2. Press[ADMIN]button to enter toAdministrator Menuand enter toPrice Tagscreen
3. Then press [LISTING ITEM] button to go to Listing Item screen4. Do operations as desired
OVERVIEW OF LISTING ITEM[Home] [Up]1. Search RangeTo select search range for searching itemInitialized - To search items within initialized tagNot Initialized - To search items within items that not been initialized with tagAll - To search all range of item (initialized and not initialized)Paper Tag Printed - To search item within item that has printed paper tagNote: The number in "(xx)", indicate number of items available for each search option type2. EANTo search item by a EAN code (European article number)Scan barcode or enter value by keyboard and press [DISPLAY] button to search entered item dataNote: To enter value by keyboard, user are required to follow Manual Key-in Barcode Data table
3. Department CodeTo search item by department codePress [SELECT] button to view available department codeSelect department code and press [OK] button
4.Sub-Department CodeTo search item by sub-department codePress [SELECT] button to view available sub-department codeSelect sub-department code and press [OK] button5. Class CodeTo search item by class codePress [SELECT] button to view available class codeSelect class code and press [OK] button
6. Item NameTo search item by a Item Name data7. Supplier CodeTo search item by a Supplier Code
8. Promo CodeTo search item by a Promotion Code9. Optional SearchTo enable/disable use of Optional Search options
10. Tax RateTo search item by a Tax Rate value11. Unit Price MemberTo search item by a Unit Price Member value
12. Ordinary PriceTo search item by a Ordinary Price value13. Sales PriceTo search item by a Sales Price value
14. Unit PriceTo search item by Unit Price value range15. DisplayTo search and display according to entered search setting in above settings (see Search Item Displayscreen)
Press [DISPLAY] to go to Search Item Display screenNote: Press [LISTING ITEM] button to exit Search Item Display screeni) SEND DISPLAYto send data to selected tag from the search listPress [SEND DISPLAY] button to enter Send Display screen
To resend item data to tag, this function is useful when the tag is hang or display incomplete dataPress [BACK] button to exit Send Display screen and return to price tag main screena) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, withoutsymbol e.g. decimal point, Sales message and etc to selected tagb) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g.decimal point, Sales message and etc to selected tagc) [SEND 2ND SCREEN] button - to send the 2nd screen to selected tagNote1: Check box select tag and item to be send display for updating tag displayNote2: Press [BACK] button to exit and return to Search Item Display screenii) PrintingPress [PRINTING] button to enter Printing screenTo print sticker or paper tag for the selected itemPress [BACK] button to exit Printing screen and return to price tag main screen
a) [PRINT] button - to print sticker or paper tag for selected itemb) [STICKER TYPE] selection - to select available sticker type for printingNote1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design inadvanceNote2: Check box select tag and item to be send display for updating tag displayNote3: Press button, to select data from available listNote4: Press [BACK] button to exit and return to Search Item Display screeniii) Blinking ScreenPress [BLINKING SCREEN] button to enter Blinking Screen mode screenTo set selected tag to blink tag displayed dataPress [BACK] button to exit Blinking Screen mode screen and return to price tag main screen
a) [START] button - to start blinking tag displayb) [STOP] button - to stop blinking tag displayc) [PAGE NUMBER] selection - to select page of tag to be displayed after stop blinkingoperation.Note1: Check box select tag and item to be send display for updating tag displayNote2: Press button, to select data from available listNote3: Press [BACK] button to exit and return to Search Item Display screen16.LOG NAK
Press [LOG NAK] button to view list of tag with acknowledgment error for 1st screen of tagWhen the Info base did not receive acknowledgment from the tag during updating, it will record the taginfo on the lista) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, withoutsymbol e.g. decimal point, Sales message and etc to selected tagb) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g.decimal point, Sales message and etc to selected tagNote1:Check box select tag and item to be send display for updating tag display
Note2:Press[BACK]button to exit and return to Listing Item Screen17. LOG NAK 2Press [LOG NAK 2] button to view list of tag with acknowledgment error for 2nd screen of tagWhen the Info base did not receive acknowledgment from the tag during updating, it will record the taginfo on the listPress [SEND] button to send the 2nd screen display to selected tag
Note1: Check box select tag and item to be send display for updating tag displayNote2: Press [BACK] button to exit and return to Listing Item Screen18. Log StickerTo print sticker or paper tag for the selected itemItem data send to sticker log by Info System when required to print a new sticker, this apply whensticker format data been updateda) [PRINT] button - to print sticker or paper tag for selected itemb) [STICKER TYPE] selection - to select available sticker type for printingPress [LOG STICKER] button to view list of sticker required for printing
Note1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design inadvanceNote2: Check box select tag and item to be send display for updating tag displayNote3: Press button, to select data from available listNote4: Press [BACK] button to exit and return to Listing Item screen19. View Extra ScreenTo set all tag displayed in selected screen mode
Press [VIEW EXTRA SCREEN] button to set tag displaying screena) [VIEW 2ND] button - to set tag to be display in 2nd Screenb) [VIEW 1ST] button - to set tag to be display in 1st ScreenNote: Press [BACK] button to exit and return to Listing Item screenNote1:Press button, to select data from available list
Note2: Click box to enter desired dataNote3: Press [CLEAR] button to clear data retrieved or enteredNote3: press button, to exit from Maintenance screen, Price/TransactionMaintenance screen.
MANUAL KEY IN BARCODE DATA[Home] [Up]Barcode data (EAN) can be manually key-in using keyboard, but required to key in as bellow table. And depend on the number of digits entered, the system willconsider the barcode used as the barcode type and search data within a valid number configuration.No.Keyboard Entered DigitsValid NumberBarcode Type1.13 digits13 digitsEAN-132.12 digits0 + 12 digits / 12 digitsUPC-A3.11 digits00 + 11 digits / 11 digitsUPC-A4.10 digits00 + 10 digits + CD / 10 digitsUPC-A5.8 digitsIf the first digit is Zero, cut first and last digit = 6 digitsUPC-EIf first digit is not Zero, use 8 digit = 8 digitsEAN-86.7 digitsIf the first digit is Zero, cut first digit = 6 digitsUPC-EIf the first digit is not Zero, cut last digit = 6 digitsUPC-E7.6 digits6 digitsUPC-E

Navigation menu