DENSO TEN FT0071A WIRELESS SPEAKER SYSTEM User Manual TD M1 EN indd

Fujitsu Ten Limited WIRELESS SPEAKER SYSTEM TD M1 EN indd

Users Manual

1ContentsFeatures ……………………………… 2Included items ……………………… 2Terminals ……………………………… 3Preparing the speakers …………… 4Adjusting the speaker angle ……………… 4Attaching the grills ………………………… 4Connecting the power ……………………… 4Connecting supported devices …… 5AirPlay ………………………………… 6Wi-Fi mode (recommended) ……………… 6Direct mode ………………………………… 6Using the TD-M1 …………………… 7Indicator (center) display ……………………7Switching the power on or off ……………… 7Auto-standby function ………………………7Adjusting the volume ……………………… 7Switching the source ……………………… 7Switching AirPlay connection modes ………7Connecting via AirPlay ……………… 8 Connecting using Direct mode ………… 8 Connecting using Wi-Fi mode …………… 8Playing music ………………………… 9Listening via AirPlay ………………………… 9 iOS device ………………………………… 9 iTunes ……………………………………… 9Listening via USB connection (Type A) … 10Listening via USB connection (Type B) … 10 Mac ………………………………………… 10 Windows PC ……………………………… 11 Windows 7, Windows 8 ………………… 11 Windows XP ……………………………… 12Listening via AUX connection …………… 12TD-M1 Network Audio Device Settings screen …………………… 13 Using Safari on a Mac ……………………13 Using Network on Windows 7, Windows 8 ……………………………… 13 Using My Network Places on Windows XP ……………………………… 14 Using an iOS device ………………………14 Configuring the network settings ……… 15 Device Details screen …………………… 15 Network Settings Screen ………………… 16 Updating software ……………………… 17Resetting the TD-M1 ……………… 18Maintenance ……………………… 18Troubleshooting …………………… 18Trademark ………………………… 18Notice for WEEE directive ……… 18Specifications ……………………… 19 TD-M1 ……………………………………… 19 AC adapter ………………………………… 19Audio etiquette•Depending on the location, even enjoyable music can be bothersome. Enjoy music at an appropriate volume so as not to disturb the people around you.•At night in particular, music can travel far to surrounding areas even at a low volume. Be mindful of others and maintain a pleasant living environment.
2Included items* When two types of cables are included, use one with the suitable plug for your outlet.1 Right speaker (right channel) 12 Left speaker (left channel) 13 Grill 26 Wi-Fi® antenna 1If any items are damaged or missing, contact the place of purchase.7 Quick guide 1JP EN DE FR IT ES PT安全上のご注意とアフターサービスについてImportant Safety Instructions and After-Sales ServiceWichtige Hinweise zur Sicherheit und KundendienstImportantes instructions de sécurité et service après-venteImportanti istruzioni di sicurezza e assistenza post-venditaInstrucciones importantes de seguridad y servicio de posventaInstruções de Segurança Importantes e Serviço Pós-VendaFUJITSU TEN LIMITED One (1) Year Limited WarrantyTerms and Conditions of warranty(Two (2) Years limited warranty only in the countries of European Union (EU))1. When warranty becomes effectiveThis warranty becomes effective from the date at which the product was originally purchased.2. What warranty coversWe will repair the product (“Product”) manufactured by FUJITSU TEN LIMITED to which this warranty relates, if it is agreed there are any defects in material or in manufacturing, at no charge (“Warranty Repair”) based upon the period and the conditions stated herein. We will repair the Product as a Warranty Repair. Any removed defective parts will become the property of FUJITSU TEN LIMITED.3. Warranty PeriodThe One (1) year, (Two (2) years in EU) limited warranty, commences on the date the Product was purchased with a valid receipt.4. How to obtain a Warranty RepairIn the first instance you should contact your original retailer of the Product who may be able to assist in resolving your issue. If the issue was not resolved, please contact FUJITSU TEN LIMITED as listed in the owner’s manual or on our Web support page (http://www.eclipse-td.net/), along with the receipt, for Warranty Repair.5. What is NOT covered by this warrantyWe will make a charge, even if the Product is within the Warranty Period, for any repair under the following circumstances:a. No original proof of purchase is available.b. No indication herein of purchase date, name of customer or name of shop.c. Replacement of consumables (e.g. batteries)d. Any evidence of modification and/or tampering with the original serial number.e. Any damage caused by:· Misuse outside of the handling methods indicated in the owner’s manual, poor maintenance or service by the customer, cosmetic damage or any modification of the Product.· Malfunction of another manufacturers product when in use with our Product. · External factors such as fire, pollution, chemical cleaner, abnormal voltage, use of a power supply providing non-rated voltage or frequency, earthquake, thunder, lightning, wind or flood damage, or other such natural disasters.f. Any other use that could reasonably be considered how the Product was not originally intended to be used.· Shipping cost to FUJITSU TEN LIMITED including postage, packaging materials and handling.· Any damage during shipping.· Unauthorized repair or modification performed by non-authorized FUJITSU TEN LIMITED repair facility.6. WHERE THIS WARRANTY IS VALIDThis warranty is applicable in the country of original purchase.7. WARRANTY DISCLAIMER AND LIMITATIONTHIS WARRANTY STATEMENT FOR THE PRODUCT AND THE SOFTWARE IS IN LIEU OF ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT. ALL IMPLIED OR STATUTORY WARRANTIES, TO THE EXTENT THAT THEY CANNOT BE EXCLUDED, ARE LIMITED TO THE EFFECTIVE PERIOD OF THE EXPRESS WARRANTY SET FORTH HEREIN. IF THE PRODUCT IS DEFECTIVE IN MATERIALS OR WORKMANSHIP, YOUR SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT AS PROVIDED ABOVE. HOWEVER IF THAT REMEDY FAILS OF ITS ESSENTIAL PURPOSE, WE RESERVE THE RIGHT TO REFUND THE PURCHASE PRICE OF THE PRODUCT TO THE PURCHASER IN EXCHANGE FOR THE RETURN OF THE PRODUCT. WE SHALL NOT BE LIABLE FOR ANY DAMAGES INCLUDING, BUT NOT LIMITED TO, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF USE OR DATA, LOSS OF PROFITS OR INTERRUPTION OF BUSINESS, WHETHER SUCH ALLEGED DAMAGES ARE BASED IN WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY, BUT EXCLUDING PERSONAL INJURY), CONTRACT, OR INDEMNITY.8. Other RightsIf your country or state does not allow any limitation or exclusion by its law, above terms may not apply to you.9. Others· Please keep your proof of purchase safe for future reference.· FUJITSU TEN LIMITED is not liable for transportation and installation charges. · The maximum liability of FUJITSU TEN LIMITED will not exceed the retail price actually paid. See the owner’s manual for further information on repairs after the Warranty Period or the storage period of spare parts.FUJITSU TEN LIMITED.2-28, Gosho-dori 1-chome, Hyogo-ku, Kobe, Hyogo, Japan 652-8510+81-78-671-50818 Important Safety Instructions and After-Sales Service 19 Warranty 14 AC adapter 15 Power cable 1*This product is a speaker system that has been designed based on Time Domain theory. Time Domain theoryTheory with the goal of reproducing accurately the audio waveforms carefully created by artists and engineers. This conveys the delicate expressions that musicians have included in their music and creates a space that feels alive.FeaturesMake sure that the following items are included in the packaging before using this product.
3TerminalsNo. Terminal Use1Power-input terminal Connect the included AC adapter.2AUX IN terminal (3.5 mm stereo jack) Connect a TV set, CD player or other external device. Use a commercially available audio cable with a 3.5 mm stereo plug.3USB terminal (Type A) Connect an iPhone, iPod or iPad. Use the Lightning to USB or 30-pin to USB cable included with your device.4USB terminal (Type B) Connect a Mac or Windows PC. Use a commercially available USB A-B cable (USB printer cable).5Left-channel speaker output terminal Connect to the left-channel speaker input terminal.6Antenna input terminal Connect the included Wi-Fi antenna.7Left-channel speaker input terminal Connect to the left-channel speaker output terminal.Right channel speaker Left channel speaker123456 7
4Preparing the speakersAdjusting the speaker angle+10°+20°You can adjust the speaker to an angle of your choosing from 0° (horizontal), 10°, and 20°.1 Place the speaker on its side.When placing the speaker on its side, use a soft cloth or similar item to prevent scratches.2 Move the lever in the direction shown in the diagram 1 to release the lock.3 Adjust the speaker to an angle of your choosing.4 Move the lever in the direction shown in the diagram 2 to set the lock.Attaching the grillsAttach the grills, for example, when the speaker will not be used or if you would like it attached.1 Attach the grills as shown in the diagram.Connecting the powerTo connect the power of the TD-M1, perform the following procedure.1 Connect the left-channel speaker output terminal to the left-channel speaker input terminal.2 Connect the included power plug and AC adapter.3 Connect the included AC adapter to the power input terminal of the TD-M1.4 Connect the power plug to an outlet in your home.
5Connecting supported devicesThe following table shows the devices that can be connected to the TD-M1 and their connection methods.Connections Connectable devicesListening via AirPlay Supports audio playback from an iPhone, iPod touch, iPad (iOS 4.3.3 and later), or iTunes 10.2.2 and later (on a Mac or Windows PC).Listening via USB connection (Type A) Supports audio playback from an iPhone, iPod, or iPad and charging of an iPhone or iPod.Listening via USB connection (Type B)Supports audio playback from a Mac or Windows PC (XP/7/8). If you will use a Windows PC, first install the dedicated driver. (See page 11 “Windows PC”)Listening via an AUX connection Supports playback of analog audio. Connection requires a commercially available cable with a 3.5 mm stereo plug.* The functions of the TD-M1 were developed and tested based on the iPhone, iPod touch, iPad, and iTunes software versions listed on the Eclipse web site. If other versions of iPhone, iPod touch, iPad, or iTunes software are used, some functions may not be compatible.
6AirPlayThe TD-M1 can play music sent wirelessly from a supported device via AirPlay.There are two operation modes, as shown below. However, we recommend connecting in Wi-Fi mode when a Wi-Fi environment is available.Wi-Fi mode (recommended)Direct mode•Connect the TD-M1 and supported devices via a Wi-Fi router. You can connect from all devices connected to the same local area network (LAN) to the TD-M1. After configuring the default settings (page 8 “Connecting using Wi-Fi mode”), you can connect to the TD-M1 by simply connecting the playback device to the Wi-Fi router. You can connect to the Internet via the Wi-Fi router even while communicating with the TD-M1. A Wi-Fi router must be prepared separately.*A wireless LAN router that supports one of the following standards can be used: IEEE802.11b/g.•Connect the TD-M1 and compatible device directly without using a Wi-Fi router. A Wi-Fi router is not necessary. While the device is communicating with the TD-M1, you cannot connect to the Internet from the device. In Direct mode, communication is not protected by encryption.If a third party connects without permission and attempts an audio playback operation from a wireless device, the TD-M1 may perform the operation.TD-M1LAN cableWi-Fi routerWindows PC Mac iPad iPhone iPod touchTD-M1iPhone or other compatible device
7Using the TD-M1Indicator (center) displayIndicators Meaning Red Standby Orange Network standby Blue Power on (Wi-Fi mode) Green Power on (Direct mode) Orange (flashing) Attempting Wi-Fi connection Red (flashing)Wi-Fi connection error (Perform the Wi-Fi mode connecting procedure on page 8 “Connecting via AirPlay”.) White (flashing) Software update in progressSwitching the power on or offTo switch the power on, touch To enter standby, touch for 3 seconds.To enter network standby, touch for 1 second. During network standby, Wi-Fi communication is available. If playback is started via AirPlay, the power is switched on automatically.Auto-standby functionThe auto-standby function is on by default. If there is no operation and audio input for 30 minutes, the device enters network standby automatically.The settings for the auto-standby function can be changed by using the dedicated iOS application.Adjusting the volumeTo raise the volume, touch . Alternatively, slide the volume slider to the right.To lower the volume, touch . Alternatively, slide the volume slider to the left.Switching the sourceTouch .· The source can be switched in the following order: AirPlay, USB B, USB A, and AUX.· The selected source is shown by the indicators.Switching AirPlay connection modesTo switch to Wi-Fi mode, while touching , touch for 1 second. The indicator changes to blue after flashing orange.To switch to Direct mode, while touching , touch for 1 second. The indicator changes to green after flashing orange.Indicators Volume sliderPower switchVolume-down switch Volume-up switch
To play music wirelessly using AirPlay, connect your device and the TD-M1 via Wi-Fi. To connect, perform the following procedure. Connecting using Direct mode1 Make sure that the power of the TD-M1 is on.2 Make sure that the indicator is on and green.When it is powered on blue or flashing in red, switch to Direct mode. (See page 7 “Switching AirPlay connection modes”)3 From the Wi-Fi settings screen of your device, connect to “ECLIPSE TD-M1******.”* “******” is the ID number of the product. Your ID number can be recognized by the last 6 digits of the MAC ID on the bottom label.*The above example is the iOS screen.While the device is connected in Direct mode, you cannot connect to the Internet from your device. Connecting using Wi-Fi modeIf a Wi-Fi router is available, we recommend connecting in Wi-Fi mode. To connect, perform the following procedure.1 First connect your device and the TD-M1 in Direct mode.2 Open your web browser, and access the following address to open the settings screen: http://192.168.1.12.If you are using a Mac or Windows PC, you can also open the settings screen using the procedure shown on page 13 “TD-M1 Network Audio Device Settings screen”.34 Select a SSID for your Wi-Fi router, and then enter the password.If the connection is completed, the indicator switches on blue. If the connection was not successful, the indicator flashes red. After confirming that the SSID and password are correct, perform the procedure again starting from Step 1.5 Connect your device to the Wi-Fi router in your home.The procedure to configure Wi-Fi mode is necessary for the initial connection only. Thereafter you can connect by performing Step 5 only.8Connecting via AirPlay
9Playing musicListening via AirPlayTo play music via AirPlay, connect your device and the TD-M1 via Wi-Fi, and then perform the following procedure. (Page 8 “Connecting via AirPlay”) iOS device1 Make sure that the power of the TD-M1 is on.2 Touch on the TD-M1 to switch the input source to AirPlay. (Page 7 “Switching the source”)345* “******” is the ID number of the product.6 Operate the iOS device to play music.*The screen display depends on the iOS version. iTunes1 Make sure that the power of the TD-M1 is on.2 Touch on the TD-M1 to switch the input source to AirPlay. (Page 7 “Switching the source”)34ECLIPSE TD-M15 Operate the iTunes to play music.
10Listening via USB connection (Type B)To play music via USB (Type B), you must configure the Mac/Windows PC. In addition, if you will use a Windows PC, you must first install the dedicated USB audio driver before connecting the USB terminal. Mac1 Make sure that the power of the TD-M1 is on, and then connect the Mac to the USB terminal (Type B).2 Touch on the TD-M1 to switch the input source to USB B. (Page 7 “Switching the source”)3 4 5ECLIPSE TD-M16 Operate music playback software (such as iTunes) to play music.Listening via USB connection (Type A)To play music via USB (Type A), perform the following procedure.1 Make sure that the power of the TD-M1 is on, and then connect the iPhone/iPod/iPad to the USB terminal (Type A).If an iPhone/iPod/iPad is connected to the USB terminal (Type A) during network standby, the power switches on automatically.2 Touch on the TD-M1 to switch the input source to USB A. (Page 7 “Switching the source”)3 Operate the iPhone/iPod/iPad to play music.
11Next, check the operating system you are using, and then configure the settings. Windows 7, Windows 8*The below examples are the Windows 8 screens.1 Make sure that the power of the TD-M1 is on, and then connect the Windows PC to the USB terminal (Type B).2 Touch on the TD-M1 to switch the input source to USB B. (Page 7 “Switching the source”)3 Open Control Panel.456ECLIPSE TD-M178 Operate music playback software (such as Windows Media Player) to play music. Windows PCIf you are using a Windows PC, first browse to the Eclipse web site, and then download the USB audio driver.1 Access http://www.eclipse-td.net, browse to the “Support” page, and then download the USB audio driver.2 Uncompress the downloaded file.3 Open the uncompressed folder, and then run the file “Setup.exe.”4 Follow the instructions on the screen to install the driver.
12 Windows XP1 Make sure that the power of the TD-M1 is on, and then connect the Windows PC to the USB terminal (Type B).2 Touch on the TD-M1 to switch the input source to USB B. (Page 7 “Switching the source”)3 Open Control Panel.45ECLIPSE TD-M16 Operate music playback software (such as Windows Media Player) to play music.When changing USB ports on the PC, you must reinstall the driver first.Listening via AUX connectionTo play music via AUX connection, perform the following procedure.1 Make sure that the power of the TD-M1 is on, and then connect to the audio output cable of the external device to the AUX IN terminal.2 Touch on the TD-M1 to switch the input source to AUX. (Page 7 “Switching the source”)3 Operate the external device to play music.
13TD-M1 Network Audio Device Settings screen Using Network on Windows 7, Windows 8*The below examples are the Windows 8 screens.1234 The TD-M1 Network Audio Device Settings screen appears.To perform the following operations, configure the settings from the TD-M1 Network Audio Device Settings screen.· Change the name displayed on the network for the TD-M1· Configure advanced network settings· Update software (a Mac or Windows PC is required)Before opening the settings screen, connect your device and the TD-M1 via Wi-Fi. (Page 8 “Connecting via AirPlay”) Using Safari on a Mac123BonjourECLIPSE TD-M1* “******” is the ID number of the product.4 The TD-M1 Network Audio Device Settings screen appears.If “Bonjour” is not found in the bookmarks, select “Safari” and “Preferences” from the menu. Select “Advanced” and tick “Include Bonjour in the Favorites bar”.Bonjour is added to the Favorites bar.
14 Using My Network Places on Windows XP12345 The TD-M1 Network Audio Device Settings screen appears. Using an iOS deviceWhen an iOS device is connected in Wi-Fi mode, the settings screen cannot be opened from the iOS device. Connect in Direct mode, and then perform the following operations. (Page 8 “Connecting via AirPlay”)1 Connect your device and the TD-M1 in Direct mode.2 Open your web browser, and access the following address to open the settings screen: http://192.168.1.12.If the settings screen has been opened on an iOS device, software cannot be updated.To update software, connect the TD-M1 in Wi-Fi mode (Page 8) “Connecting via AirPlay”), and then use a Mac or Windows PC.
15No. Item Details1Device Details You can check advanced information about the TD-M1.2Network Settings You can change network settings.3Software Update You can update software. *4Language You can select the language.5Device Name You can change the name displayed on the network for the TD-M1.* Displayed only in Wi-Fi mode. Configuring the network settings Device Details screen12345
16No. Item Details1Access Point Scan Available access points are found automatically. Select an SSID, and then enter the encryption key.2Wireless Settings You can select the SSID and security method manually. Use these settings when the Wi-Fi router is set to stealth mode.3IP Address SettingsYou can configure the IP address settings manually. In most situations, select the “Automatic Setup” check box. To use a static IP address, clear the “Automatic Setup” check box, and then enter the appropriate items. After changing the settings, click “Apply”. Network Settings Screen123
17 Updating softwareThe software of the TD-MI may be updated on an irregular basis. To update software, first browse to the Eclipse web site, and then download the update file.To update software, connect the TD-M1 in Wi-Fi mode (Page 8 “Connecting via AirPlay”), and then use a Mac or Windows PC.1 Browse to http://www.eclipse-td.net, and then download the update file from the “Support” page.2 Uncompress the downloaded file.3 Open the TD-M1 Network Audio Deveice Settings screen. (See page 13 “TD-M1 Network Audio Device Settings screen”)4*Not displayed in Direct mode.56789The update starts. When the update is completed, the TD-M1 enters standby automatically.During an update, do not switch off the power of the TD-M1.
18Resetting the TD-M1If the TD-M1 is reset, all settings are cleared.1 Make sure that the power is on.2 While touching , touch and at the same time for 3 seconds.After resetting, the TD-M1 enters standby.MaintenanceBefore cleaning, be sure to turn off the power supply for all connected equipment and disconnect the power cords from the electrical outlets. Remove any dirt from the unit by lightly wiping with a soft dry cloth.If required moisten the cloth to remove surface dirt, then dry with a soft cloth.Do not use gasoline or thinners, etc. on this unit as it may damage the cabinet.TroubleshootingWhen you have any troubles including system malfunction with the product, browse to the Eclipse web site (http://www.eclipse-td.net) and refer to the “Support” page.TrademarkAirPlay, Bonjour, iPad, iPhone, iPod, iPod touch, iTunes, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.Windows and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.Wi-Fi® is a registered trademark of Wi-Fi Alliance. Notice for WEEE directiveIn accordance with the European Directive 2002/96/EC (for Waste Electric and Electronic Equipment=WEEE), this product, which is labeled with crossed-out wheeled bin, may not be disposed of with household waste in member states of the EU. WEEE : Waste Electrical and Electronic EquipmentWhen disposing of this product in an EU member state, dispose properly in accordance with the laws of that state, for example by returning it to the distributor. WEEE has the potential effects on the environment and human health as a result of the presence of hazardous substances. You can contribute to eliminate these effects and to enhance reuse/recycle/ other forms of recovery by your cooperation.
19SpecificationsBe aware that the specifications and exterior may change without notice for improvements. TD-M1Speaker unit ................................................... Full range speaker with 8-cm coneMethod .......................................................... Bass reflex boxPlayback frequency ........................................ 70Hz to 30kHzRated output .................................................. 20 W (T.H.D: 1%) *When one channel is operatingMaximum output ........................................... 25 W (T.H.D: 10%) *When one channel is operatingHarmonic distortion ....................................... 0.08% (at 10 W output, 1 kHz)S/N ratio ......................................................... 90 dB or higherResolution ...................................................... 60 dB or higherInput .............................................................. Wi-Fi, USB B (for PC/Mac), USB A (for iPhone/iPod/iPad), and analog (3.5 mm stereo mini)Input sensitivity ............................................. 950 mVrms (at 20 W output)Input impedance ............................................ 10kΩPower consumption ....................................... 10WStandby power (during network standby) ...... 2.7WStandby power (during standby) .................... 0.5 W or lessOuter dimensions (mm) *Single speaker ...... W155D219H242Weight (pair) .................................................. About 5.3 kg AC adapterInput voltage .................................................. 100V to 240V (50Hz/60Hz)Output voltage ............................................... 20VOutput current ............................................... 3.6AOuter dimensions (mm) ................................. W132D54H31Weight ........................................................... About 0.4 kgMANUAL No.: 090002-36270700 (EN) 1401(0)

Navigation menu