DENSO TEN FT0020A CD Receiver with Bluetooth User Manual FT0020A GMI700 BT Manual 100917

Fujitsu Ten Limited CD Receiver with Bluetooth FT0020A GMI700 BT Manual 100917

TempConfidential_8. User's Manual

• Do not leave your mobile phone in the car. The temperature inside may be high and damage the phone.• When you dispose of your car, take care to delete all personal data that are registered in your Chevrolet AUDIO system. You should delete the following Hands-free data from the system;• Bluetooth phone dataIn the following conditions, the system may not function.• The mobile phone is turned off.• The current position is outside the communication area.• The mobile phone is not connected.• The mobile phone has a low battery.HANDS-FREE SYSTEM• The Bluetooth® word mark and logos are owned by the BluetoothHands-free system allows you to make or receive a call without taking SIG, Inc. and use of such marks by General MOTORS LIMITED isyour hands off the steering wheel by connecting your mobile phone. under license. Other trade marks and trade names are those of theirThis system supports Bluetooth. Bluetooth is a wireless radio data respective owners.transferring system by which you can make calls without your mobile• Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2phone being connected with a cable or placed on cable. or laterIf your mobile phone does not support Bluetooth, this system• Compatible Profiles: HFP Ver. 1.5 or latercan not function. OPP Ver. 1.1 or laterATTENTIONNOTE CAUTIONWhile driving, do not use a mobile phone or connect the bluetooth phone.HANDS-FREE OPERATION③ DISPLAY WINDOW⑦ FUNCTIONBUTTONS① VOLUME ADJUST KNOB② PHONE BUTTON⑤ AUDIO BUTTON④ TUNE• FILE KNOB⑥ MENU BUTTON!!!!FUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY• The telephone set will be registered in the main unit automatically. When registration is completed, the message "Completed!" appear for a few seconds Reception Level Indication and " " is shown in the DISPLAY WINDOW ③ in that order.The strength of the reception is indicated in the DISPLAY WINDOW ③(5) Press the PHONE button ② to go back to the previous mode. You cannot register the Bluetooth telephone set while driving. Park your vehicle in a secure location and select the telephone set.Bluetooth connection statusWhen a Bluetooth connection is established, " " is shown in theDISPLAY WINDOW ③ If "Failed" is displayed in the DISPLAY WINDOW ③ after entering the pass key, repeat the registration operation.REGISTERING A BLUETOOTH TELEPHONE SETRegistration is required in order to use a Bluetooth telephone set.CHANGING THE PASS KEYFor details of the operation to be performed at the telephone set, refer to the instruction manual supplied with the telephone set. (1) Press the PHONE BUTTON ② to display the phone menu.(2) Press MENU BUTTON ⑥, then press in the FUNCTIONREGISTERING BLUETOOTH TELEPHONE SET FOR THE FIRST TIME BUTTON ⑦ to display Bluetooth menu.(NO PHONES CURRENTLY REGISTERED)(3) Press in the FUNCTION BUTTON ⑦ to display the(1) Press the PHONE BUTTON ② to display the phone menu. Bluetooth information of the main unit.(2) Press MENU BUTTON ⑥, then press in the FUNCTION (4) Press in the FUNCTION BUTTON ⑦ to change the pass key. BUTTON ⑦ to display Bluetooth menu. (5) Turn the TUNE•FILE KNOB ④ to display the numeral of your(3) Press in the FUNCTION BUTTON ⑦ so that the main choice in the DISPLAY WINDOW ③, then press the AUDIO unit will start searching for other Bluetooth devices. BUTTON ⑤.(4) When "Connecting...", "Device Name: Chevrolet" and• Repeat the same operation until you have entered the entire pass key. "Passkey: ____" is displayed in the DISPLAY WINDOW ③; (6) After entering the final number of your choice, press in the use the mobile phone to pair with the main unit FUNCTION BUTTON ⑦ to save the pass key you have entered. and to enter the pass key.• The pass key number comprises of only 4 digits.• The connection method from the telephone set to the unit varies according • If you wish to change the pass key again, press and then press to the specification of your telephone set. Refer to the instruction manual in the FUNCTION BUTTON ⑦. supplied with the telephone set(5) Press the PHONE button ② to go back to the previous mode.NOTE Indication LevelATTENTIONStrongWeakBTPAIRINFOEDITBTSAVEINFO EDITFUJITSU TEN CONFIDENTIAL
(1) Press the PHONE BUTTON ② to display the phone menu.(2) Press in the FUNCTION BUTTON ⑦ to input the numberYou cannot change the pass key while driving. Park your vehicle in a secure you wish to call.location and change the pass key.(3) Turn the TUNE•FILE KNOB ④ to display the numeral of your choice in the DISPLAY WINDOW ③, then press the AUDIO BUTTON ⑤.• Repeat the same operation until you have entered the entire number.DELETING A REGISTERED TELEPHONE SET(4) When the name or telephone number you wish to call appears in the DISPLAY WINDOW ③, press in the FUNCTION(1) Press the PHONE BUTTON ② to display the phone menu. BUTTON ⑦.(2) Press MENU BUTTON ⑥, then press in the FUNCTION (5) When the person receives the call, use "hands-free" to talk. BUTTON ⑦ to display Bluetooth menu.• When you have finished the call, press in the FUNCTION BUTTON ⑦.(3) Press in the FUNCTION BUTTON ⑦ to display the mobile phone information that is currently paired with the main unit.(4) Press in the FUNCTION BUTTON ⑦ to delete/disconnectMAKING A PHONE CALL FROM A REGISTERED NUMBER the currently paired mobile phone.(5) "Delete ok?" will appear in the DISLAY WINDOW ③ asking for (1) Press the PHONE BUTTON ② to display the phone menu. confirmation, then press in the FUNCTION BUTTON ⑦. (2) Press in the FUNCTION BUTTON ⑦ to display all phone• When deletion is completed, BT mark " " will disappear in the numbers registered, then turn TUNE•FILE KNOB ④ to search DISPLAY WINDOW ③. and select the number you wish to call.(5) Press the PHONE button ② to go back to the previous mode. (3) When the name or telephone number you wish to call appears in the DISPLAY WINDOW ③, press in the FUNCTION BUTTON ⑦.(4) When the person receives the call, use "hands-free" to talk. You cannot delete the registered telephone set while driving. Park your• When you have finished the call, press in the FUNCTION BUTTON ⑦. vehicle in a secure location and delete the registered telephone set.MAKING A PHONE CALL Phone number is not displayed while driving. Only when the vehicle is stopped or parked, the phone number is displayed.You can make a phone call using the phone book of the main unit, manually dialing from the main unit or direct from your mobile phone.ATTENTIONATTENTIONATTENTIONBTCELLDELYESDIALCALLBOOKCALLENDENDFUJITSU TEN CONFIDENTIAL
ANSWERING A PHONE CALL(2) Press MENU BUTTON ⑥, then press in the FUNCTION BUTTON ⑦ to display Bluetooth menu.When your telephone set receives a call, the name or telephone (3) Press in the FUNCTION BUTTON ⑦ to add phone booknumber appears in the DISPLAY WINDOW ③ entry.• If the incoming telephone number is not registered, the telephone(4) Press in the FUNCTION BUTTON ⑦ so that the main device number is displayed in the DISPLAY WINDOW ③. will be ready to receive the phone book entry. If the incoming telephone name and number are registered, the name(5) When "Connecting…" and "Please send phonebook!" is displayed is displayed in the DISPLAY WiNDOW ③. in the DISPLAY WINDOW ③, send the phone book data from If only the incoming telephone number is registered, the telephone the mobile phone to the main device via Bluetooth. number is displayed in the DISPLAY WINDOW ③.• When the mobile phone has completed the sending, "Completed" appears for a few seconds in the DISPLAY WINDOW ③.(1) Press in the FUNCTION BUTTON ⑦ and talk "hands-free".• When the main device's phone book has run out of registration capacity,• When you have finished the call, press in the FUNCTION BUTTON ⑦. "Memory Full" will be displayed in the DISPLAY WINDOW ③.(6) Press the PHONE button ② to go back to the previous mode.REFUSING AN INCOMING CALL(1) Press in the FUNCTION BUTTON ⑦ while the phone is ringing. You cannot register any information in the phone book while driving. Park your vehicle in secure location and then register the information.REGISTERING INFORMATION IN THE PHONE BOOKTelephone numbers and names can also be registered manuallyin the phone book. Up to 100 entries can be registered in theDELETING THE DATA IN THE PHONE BOOKphone book of the main device.(1) Press the PHONE BUTTON ② to display the phone menu.REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN(2) Press MENU BUTTON ⑥, then press in the FUNCTIONTHE PHONE BOOK OF THE MAIN DEVICE BUTTON ⑦ to display Bluetooth menu.To register the phone book data of a mobile phone registered inthe main device.(1) Press the PHONE BUTTON ② to display the phone menu.ATTENTIONCALLENDENDBTBOOKADDBTFUJITSU TEN CONFIDENTIAL
(3) Press in the FUNCTION BUTTON ⑦ to display allSETTING THE VOLUME registered phone number.(4) Turn the TUNE•FILE KNOB ④ to search for the phone bookSETTING THE SPEECH VOLUME entry you wish to delete. (1) Turn the VOLUME ADJUST KNOB ① clockwise or anticlockwise to(5) Press in the FUNCTION BUTTON ⑦ to delete the achieve the speech volume you consider best. registered phone number.•The volume set in the adjustment is recorded.• There is also an option for deleting all phone book entries by pressing in the FUNCTION BUTTON ⑦.SETTING THE VOLUME OF THE RING TONE(6) "Delete ok?" will appear in the DISPLAY WINDOW ③ asking for (1)While the phone is ringing, turn the VOLUME ADJUST KNOB ① confirmation, then press in the FUNCTION BUTTON ⑦. clockwise or anticlockwise to achieve the ring tone volume you• When there is no data in the main device's phone book, "No Entry" will appear consider best. in the DISPLAY WINDOW ③. •The volume set in the adjustment is recorded.(7) Press the PHONE button ② to go back to the previous mode.The volume and microphone gain setting for each mobile phone is different You cannot delete the phone book data while driving. Park your vehicle according to its specification. in a secure location and then delete the data. Please adjust the volume by turning the VOLUME ADJUST KNOB ①.DISPLAYING THE DEVICE INFORMATION OF THEMAIN DEVICE(1) Press the PHONE BUTTON ② to display the phone menu.(2) Press MENU BUTTON ⑥, then press in the FUNCTION BUTTON ⑦ to display Bluetooth menu.(3) Press in the FUNCTION BUTTON ⑦ to display the Bluetooth information of the main unit.(4) Press the PHONE button ② to go back to the previous mode.You cannot adjust the displayed device information of the main device whiledriving. Park your vehicle in a secure location and then carry out the display.ATTENTIONATTENTION NOTEBOOKYESDELA.DELINFOBTFUJITSU TEN CONFIDENTIAL
FCC ID: BABFT0020AThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including 　　 interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.Radio Frequency Radiation ExposureThis equipment complies with FCC radiation exposure limits setforth for uncontrolled equipment and meets the FCC radiofrequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).But it is desirable that it should be installed and operated with at least 20cmand more between the radiator and person's body (excluding extremities: hands, writsts, feet and ankles).This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.WARNINGCAUTIONFUJITSU TEN CONFIDENTIAL

Navigation menu