D Link WR710B1 HSPA+ Le Petit Router User Manual

D Link Corporation HSPA+ Le Petit Router

User Manual

HSPA+ Le Petit RouterDWR-710User ManualVersion 1.0 | 10/18/2013
iD-Link DWR-710 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2014 by D-Link Corporation, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.Revision Date Description1.0 January 15, 2014 • Initial releasePreface
iiD-Link DWR-710 User ManualTable of ContentsPreface ................................................................................. iManual Revisions ........................................................................... iTrademarks ...................................................................................... iProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 1Introduction ...................................................................................2Hardware Overview ..................................................................... 3Left Side....................................................................................3Installation ......................................................................... 4Connecting to Your Network .................................................... 4Inserting a microSD Card ...........................................................4Driver Installation ......................................................................... 5Wireless Installation Considerations ......................................6Conguration ..................................................................... 7Initial Connection to the Router .............................................7Connect via USB .................................................................... 7Connect via Wi-Fi .................................................................. 8Web-based Conguration .......................................................10Conguration Utility ..........................................................10Home ..............................................................................................11Navigation .............................................................................11Device Status ........................................................................12Home .......................................................................................13Wizard .............................................................................................14Internet ...........................................................................................16Connection ...........................................................................162G/3G Modem .....................................................................18SIM ...........................................................................................19PLMN .......................................................................................20Network .........................................................................................21Wi-Fi .........................................................................................22DHCP .......................................................................................23NAT ...........................................................................................24SMS ..................................................................................................26New Message .......................................................................26Local ........................................................................................26Wi-Fi .................................................................................................27Basic .........................................................................................27Wireless Security .................................................................29Wired Equivalent Privacy (WEP) ...............................29Wi-Fi Protected Access (WPA) ....................................30WLAN Authentication and Privacy Infrastructure (WAPI).................................................................................31Wi-Fi Protected Setup (WPS) .....................................32MAC Filter ..............................................................................33Station Lists ...........................................................................34Security ..........................................................................................35Firewall ...................................................................................35IP Filter ...............................................................................35Table of Contents
iiiD-Link DWR-710 User ManualTable of ContentsIPv6 Filter ..........................................................................36MAC Filter .........................................................................37DDOS ..................................................................................38URL Filter ...........................................................................39Application ...................................................................................40About ......................................................................................40Conguration .......................................................................41Firmware Upgrade ..............................................................42Standby Mode .....................................................................43Password ................................................................................44Date and Time ......................................................................45Language ...............................................................................47System Log ............................................................................48Connecting to a Wireless Network .................................49Using Windows 8 .......................................................................49Connecting to a Wireless Network .................................51Using Windows 7 .......................................................................51Conguring Wireless Security ........................................53Using Windows Vista™ ..............................................................56Conguring Wireless Security ........................................57Using Windows® XP ....................................................................59Congure WEP .....................................................................60Congure WPA-PSK ............................................................62Troubleshooting ..............................................................64Networking Basics ...........................................................66Check your IP address ...............................................................66Statically Assign an IP address ...............................................67Technical Specications ..................................................68Warnings and Declarations ............................................69
1D-Link DWR-710 User ManualSection 1 - Product OverviewSystem Requirements• A compatible (U)SIM card with mobile data service1• A computer a with Windows®, Macintosh® , or Linux-based operating systems• Internet Explorer 8, Firefox 12.0, Chrome 20.0 , or Safari 4.01 Subject to services and service terms available from your carrier.Product OverviewPackage Contents D-Link DWR-710 HSPA+ Mobile RouterBatteryUSB CableIf any of the above items are missing from your package, please contact your reseller.
2D-Link DWR-710 User ManualSection 1 - Product OverviewIntroductionHigh-Speed Mobile Internet with 3G ConnectivityThe DWR-710 Le Petit HSPA+ Router gives you high-speed access to the Internet wherever you are and lets you share it on the go. Using HSPA+ technology, you can achieve download speeds of up to 21.6 Mbps and upload speeds of up to 5.76 Mbps1. The built-in 3G antenna provides a reliable connection to your 3G service provider, and a separate Wi-Fi antenna gives extended coverage to the computers and mobile devices connected to the DWR-710.Mobile Internet for All of Your DevicesThe Le Petit HSPA+ Router lets you share your fast mobile connection over Wi-Fi from a device small enough to t in your pocket. With the DWR-710, you can get online with your notebook, smartphone, tablet, or any other wireless device using a single 3G mobile connection. The DWR-710 provides high-speed Wireless N coverage to give high-speed wireless access to everybody – whether you are with colleagues on a business trip, or travelling with friends and family.Built-in Software for Instant Access AnywhereThe DWR-710 is truly plug and play, with drivers built right into the router so you can connect without the need to install anything. Open a browser, connect the router, and you can set up your network right from a web interface. This means that notebooks and netbooks without a CD-ROM drive can connect and get up and running in no time. Once the device is set up, you can simply power it on to start up your portable mobile network, meaning that you can share your mobile Internet connection without even needing a computer. Designed for True PortabilityThe DWR-710 Le Petit HSPA+ Router is small and slim enough to carry around in your purse, bag, or pocket. It features a microSD card slot for optional removable storage (up to 32 GB), allowing you to always have your les and contacts on hand. The D-Link DWR-710 Le Petit HSPA+ Router lets you share a fast mobile Internet connection with multiple PCs and mobile devices wherever you go. It oers 3G HSPA+ compatibility for fast downlink and uplink data rates, so you get the high-speed upload and download speeds even when you’re on the go. Set up a personal mobile network anywhere, anytime allowing you and those around you to access the Internet, and share les.1 All references to speed are for comparison purposes only. Actual speeds will vary depending on a range of factors including mobile network coverage, signal strength, network activity, and environmental conditions.
3D-Link DWR-710 User ManualSection 1 - Product OverviewHardware OverviewLeft SidemicroSD Card Slot Insert a microSD Card (up to 32GB) to access and share les and media wherever you go.micro USB Connector Use the included cable to connect to a powered USB port to charge the device, or to access the conguration utility.USB ConnectormicroSD Card Slot (under removable housing)
4D-Link DWR-710 User ManualSection 2 - InstallationConnecting to Your NetworkInstallationThis section will guide you through the installation process.Remove the back cover. Slide your (U)SIM card into the slot provided, ensuring that the alignment is the same as indicated by the logo next to the slot. The gold contacts on the card should be facing downwards. “D-Link” will be displayed on the screen as the router performs its initialization processes.Caution: Always unplug and turn o the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use. Inserting a microSD Card1. Ensure that your DWR-710 Le Petit HSPA+ Router is not plugged in.2. Remove the cover. 3. Insert the microSD card into the slot and push it in until it locks into place.
5D-Link DWR-710 User ManualSection 2 - InstallationDriver InstallationWhen you plug the DWR-710 into your computer, any necessary drivers will immediately install (with your permission).Note: These drivers are Windows-only. Mac and Linux users will still be able to congure the DWR-710 using the web conguration utility described in “Conguration Utility” on page 10.
6D-Link DWR-710 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe DWR-710 can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely aect wireless signals. Ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or oce. The key to maximizing the wireless range is to follow these basic guidelines:1. Minimize the number of walls and ceilings between the router and other network devices. Each wall or ceiling can reduce your adapter’s range from 3 to 90 feet (1 to 30 meters).2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters) appears to be almost 3 feet (1 meter) thick at a 45-degree angle. At a 2-degree angle it appears over 42 feet (14 meters) thick. Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways and drywall. Materials such as glass, metal, brick, insulation, concrete, and water can aect wireless performance. Large objects such as sh tanks, mirrors, le cabinets, metal doors, and aluminum studs may also have a negative eect on range.4. If you are using a 2.4 GHz cordless phone, make sure that the 2.4 GHz phone base is as far away from your wireless device as possible. The base transmits a signal even if the phone is not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as ceiling fans, uorescent lights, and home security systems may dramatically degrade wireless connectivity.
7D-Link DWR-710 User ManualSection 2 - InstallationCongurationInitial Connection to the RouterThis section will show you how to congure your new D-Link mobile router using the conguration utility that can be obtained through a software interface or a web-based user interface.When conguring the router for the rst time, you will need to establish a direct connection with the router in order to access the web-based conguration utility. This can be done by connecting the router to a powered USB port. Once you have congured your router, you will be able to connect using the Wi-Fi settings that you have specied in the conguration process. Ensure that the router is connected before commencing the setup process.Connect via USBTo connect to the router via USB, plug the router into an available USB port on your computer. Your router is now ready for conguration, please refer to “Conguration Utility” on page 10 to continue the setup process.
8D-Link DWR-710 User ManualSection 2 - InstallationConnect via Wi-FiNote: The following example uses Windows 7’s built-in wireless connection utility. If you are using a dierent operating system, or a third party connection utility, the process may be dierent. Please refer to the documentation that came with your operating system or wireless client for further information on how to connect to a wireless network.To connect to the router using Wi-Fi, open your operating system’s wireless networking utility and scan for available networks to connect to. By default, the network name (SSID) of the DWR-710 will be in the format dlink_DWR-710xxxx, where “xxxx” represents the last four character’s of the router’s MAC address.You will then be prompted to enter the network security key for your router. The unique security key for your router will be displayed on a sticker in the router’s battery bay. Enter the security key in the box provided and click OK. Your wireless connection utility should conrm that the connection is successful, and you can move to the next step to continue to conguration process.
9D-Link DWR-710 User ManualSection 2 - InstallationOnce you have located this network with your wireless utility, connect to the network using your wireless networking utility.
10D-Link DWR-710 User ManualSection 3 - CongurationWeb-based CongurationTo access the conguration utility, open a web browser (such as Internet Explorer) and enter the IP address of the router, which is 192.168.0.1 by default.Once you have reached the conguration utility through the installed software or your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password is blank. You can also select your language from the drop-down menu. Click Login to continue.Conguration Utility
11D-Link DWR-710 User ManualSection 3 - CongurationHomeThroughout the interface you will nd a menu bar at the top of the page which includes tabs for easy navigation, and a summary bar in the upper right corner with a quick view of essential information.The Home tab will return you the home page, where a summary of the system information is shown.Click on this tab to start the setup wizard, which will guide you through the basic setup process. The Internet tab gives you Internet setup and settings options.The Network tab allows you to congure the network settings for your Local Area Network (LAN).From the SMS you can view and send SMS messages via your mobile network. The Wi-Fi allows you to congure your Wi-Fi network, as well as add new devices using WPS.The Security tab allows you to congure rewall and security settings to protect your network from WAN-side intrusions.From this tab, you can manage the administrative conguration of your router, such as time and date, rmware, language, and remote management. NavigationHomeWizard:Internet:Network:SMS:Wi-Fi:Security:Application:
12D-Link DWR-710 User ManualSection 3 - CongurationThis icon shows whether or not a compatible (U)SIM card has been inserted into the device.The number to the right of this icon indicates the number of unread messages in the SMS inbox.Indicates the current strength of the mobile network signal being received.The name of the mobile network operator to which the device is currently connected. Indicates that the device is connected to a network other than your service provider’s home network. Indicates that there is an Internet connection present.Indicates that the router’s Wi-Fi network is currently active. The number to the right of this icon indicates the number of wireless clients currently connected to the router’s Wi-Fi network.Click this button to log out of the conguration interface. SIM:SMS:Signal Strength:Operator Name:Roaming:Internet:Wi-Fi Network:Logout:Device StatusA summary of the device’s current status will be displayed on the information panel at the top of the right-hand side of the navigation bar. The following is a description of the indications, from left to right.
13D-Link DWR-710 User ManualSection 3 - CongurationThe Home page acts as a dashboard to quickly display your conguration settings and provide a summary of the current status of your network’s status. This area displays the percentage of the router’s memory and CPU currently being used by the system. This area displays a summary of the current settings for the router’s LAN.This area shows the current status of your 2G or 3G mobile network connection. This area displays a summary of the router’s current WAN settings. These details will reect the mobile network connection which is being received from the service provider. This area shows the amount of data which has been sent (TX) and received (RX) over the mobile network. This information may not reect the amount recorded by your mobile service provider. System Resources:LAN:2G/3G Modem:WAN:Trac Statistics:Home
14D-Link DWR-710 User ManualSection 3 - CongurationWizardThe Wizard page will guide you through the steps required to congure the basic settings of your router such as the IP address, network name (SSID), and password. Click on the Wizard button on the navigation bar to commence the wizard. LAN CoNfigurAtioNIf you wish to change the router’s IP address, enter the new address here. If you change the IP address from the default, you will need to enter the new address in your Internet browser’s address bar in order to access the web-based conguration utility.If you wish to change the router’s subnet mask, enter it here. Click Next to continue. 2/3g CoNfigurAtioNIf you wish to change the 2G or 3G service provider or connection type, click on a prole in the list to highlight it, and click Set to set that prole as the default. Click Next to continue, or Back to return to the previous step.IP Address:IP Subnet Mask:
15D-Link DWR-710 User ManualSection 3 - CongurationWi-fi CoNfigurAtioNChoose a password for your wireless security. Clients will need this password in order to access your network wirelessly. If you are currently connected to the router using Wi-Fi, you will need to reconnect to the router using your new password once the wizard has been completed. If you wish to change your wireless network name (SSID), enter a new name in the eld provided. If you change the SSID, you may need to re-connect to the router using the new SSID before you can access your network or the conguration utility. Click Done to complete the wizard, or click Back to return to the previous page. After you have clicked Done, a conrmation window will appear. Click OK to save the conguration. Password Setting:SSID:
16D-Link DWR-710 User ManualSection 3 - CongurationInternetThis page allows you to congure the Internet settings for your mobile network connection. Use the tabs in the left-hand column to navigate through the dierent settings categories. CoNNeCtioN operAtioNFlight mode turns o all communications so that the device can be powered on safely when in an aircraft. Select whether you want to Enable or Disable ight mode from the drop-down menu, and click Change to eect the change. Select your preferred cellular network connection mode:Auto Mode - The router will automatically connect to your preferred mobile network and remain connected while the device is powered on. Manual Mode - You must manually connect to the preferred mobile network.On Demand - The router will connect to the preferred mobile network when Internet access is required. Click Change to eect the change. Select whether you would like to Enable or Disable mobile network roaming from the drop-down menu. Caution: Roaming on networks other than your own may incur additional usage charges.Flight Mode:Preferred Cellular Network:Roaming Mode:Connection
17D-Link DWR-710 User ManualSection 3 - Congurationuser profiLe Click Add to add a new user prole.Enter a name to identify the new user prole. Enter the Access Point Name (APN) for the connection. If you do not know this information, please contact your service provider. Select the protocol to be used for the connection from the drop-down menu.Enter the username to be used for this connection.Enter the password to be used for this connection.Click the delete icon to delete this prole from the list. Click OK to save the prole.Click Apply to apply the prole settings and return to the Internet menu. Name:APN:Protocol:User:Password:Delete:Connection:Proles:Shows the type and status of the current mobile connection. To change the connection prole, select a user prole from the table below and click Set to activate the prole. Click Disconnect to manually disconnect the current mobile data service. The proles table shows the details of currently congured user proles. To add a new user prole, navigate to the User Prole tab at the top of this section.
18D-Link DWR-710 User ManualSection 3 - Conguration2G/3G ModemiNformAtioNDisplays information about your 2G or 3G modem.settiNgsSelect your preferred modem type from the drop-down menu:Auto - The modem will automatically select the modem type depending on the network it is connected to.3G Only - The modem will only connect to 3G networks.2G Only - The modem will only connect to 2G networks. If you wish to change the modem type, select your new modem type and click Change to eect the change. Re-enter the new PIN code.Click Apply to apply the changes.Information:Network:This section displays information about your 2G or 3G modem connection.
19D-Link DWR-710 User ManualSection 3 - CongurationSIMEnter the PIN code for the SIM card. Click Enable to turn on SIM lock, or click Disable to turn o SIM lock.PIN Code:This section allows you to turn SIM lock on or o for the SIM card which is currently inserted into the router.
20D-Link DWR-710 User ManualSection 3 - CongurationPLMNSelect Automatic to allow the router to automatically connect to the rst available network when roaming. Select Manual to choose your preferred roaming network from the list below. If you have selected Manual mode, click on the preferred network to select it, and then click the Update button to select that network as the preferred network. Click Query to refresh the list of available networks. Note: You will need to manually disconnect the current mobile data service before selecting a network using PLMN. Please refer to “Connection” on page 16 for further information on how to do this. Mode:This page allows you to view available Public Land Mobile Networks (PLMN). This page can also be used to select a preferred network when you are roaming outside of your home network.
21D-Link DWR-710 User ManualSection 3 - CongurationNetworkThe Network pages allow you to check the current status of your Local Area Network (LAN), and make changes to LAN settings.
22D-Link DWR-710 User ManualSection 3 - CongurationWi-FiThis section allows you to congure the IP settings for your wireless network.ipv4Enter the IPv4 address for your Wi-Fi network. If you change this address, you will need to enter the new address in your web browser’s address bar in order to access the web-based conguration utility. Enter the IPv4 subnet mask for your Wi-Fi network. Click Apply to save the current conguration. ipv6Enter the IPv6 address for your Wi-Fi network.Enter the prex to be used to delegate IPv6 addresses to the LAN.Check the box to set the router announcement mode to autonomous.Check the box to enable router announcement on-linkClick Apply to save the current conguration. DNs NAmeEnter your router’s DNS device name in the eld provided. Click Apply to save the current conguration. IP Address:IP Subnet Mask:IPv6 Address:Prex for LAN:RA Autonomous:RA On-Link:DNS Device Name:
23D-Link DWR-710 User ManualSection 3 - CongurationDHCPThe DWR-710 has a built-in DHCP server which can assign IP addresses to connected clients. This section allows you to congure the DHCP settings. DNs serverSelect None from the drop-down menus if you do not wish to specify a rst, second, or third DNS server. Select User Dene to specify a DNS server, and enter the address of the server in the eld provided. Click Apply to save the current conguration. First/Second/Third DNS Server:stAtiC DHCpUse this option to specify a DHCP address reservation to a particular device or machine based on MAC address. To add a new reservation, click Add.Enter the MAC address of the device or machine for which you wish to make the DHCP reservation.Enter the IP address that you wish to reserve. This address must be within the DHCP address pool.Click OK to save the reservation. LeAseD HostsThis table shows the details of clients currently receiving a DHCP address from the DHCP server. Click Refresh to update the table. MAC Address:IP Address:
24D-Link DWR-710 User ManualSection 3 - CongurationNATThis section allows you to congure functions related to Network Address Translation (NAT) such as port triggering.port triggerUse this option to have inbound trac automatically forwarded to a dynamic address on the LAN when triggered by outbound trac. To add a new port triggering rule, click Add.Check the box to activate this rule.Specify a name to identify the rule.Select TCP or UDP as the protocol for the trigger ports from the drop-down menu.Enter the starting and ending trigger port for the rule.Select TCP or UDP as the protocol for the ports to be opened from the drop-down menu.Enter the starting and ending ports to be opened when the trigger occurs. Click the Delete icon to delete the rule.Click OK to save the rule. Click Apply to apply the current rules and return to the Network page.Active:Name:Trigger Protocol:Trigger Port:Open Protocol:Open Port(s):Delete:
25D-Link DWR-710 User ManualSection 3 - CongurationALgApplication Level Gateways (ALG) allow certain applications to augment a network’s rewall or NAT. This section enables you to enable various ALGs as required by specic applications. To enable an ALG, check the box next to the name of the rule. Enter the Session Initiation Protocol (SIP) port required by your applications. Click Apply to save the settings and return to the Network page. SIP Port:
26D-Link DWR-710 User ManualSection 3 - CongurationSMSThe DWR-710 can send and receive SMS text messages through the mobile network’s SMS function. In this section you can check the SIM card’s inbox and outbox, as well as send new messages. New MessageSend To:Messages:Enter the phone number that you wish to send the message toEnter the body of the message to be sent.Click Apply to save the current conguration. iNboxThis tab shows a summary of SMS messages in the inbox. outboxThis tab shows a summary of messages in the outbox which are yet to be sent. Local
27D-Link DWR-710 User ManualSection 3 - CongurationWi-FiThe Wi-Fi pages allow you to check the current status of your Wi-Fi network, and make changes to Wi-Fi settings.This section allows you to congure your Wi-Fi network and specify the wireless security method to be used to secure your network. BasicCheck the box to enable the Wi-Fi function.Select the desired 802.11 wireless mode from the drop-down menu. You should make your selection based on the standards supported by the wireless clients which will be connecting to your network. To have the router automatically select the optimal wireless channel, select Auto from the drop-down menu. If you wish to select a particular channel, select it from the drop-down menu. If you are using the 802.11n standard, you can manually select the channel width which best suits your network environment. Select the desired transmission power from the drop-down menu.The beacon interval determines how often information about the wireless network is broadcast. It is recommended that you do not adjust this setting unless instructed to do so. Enable Mode:Channel:802.11N Channel Width:TxPower:Beacon Interval:
28D-Link DWR-710 User ManualSection 3 - CongurationThe Delivery Trac Indication Message broadcasts information about buered data to clients that are currently in low-power mode. Enter the desired DTIM period as a number of beacon intervals. Enter the SSID (network name) to identify your wireless network. Check the box to hide the SSID of your network. If the SSID is hidden, wireless clients must manually enter it in order to connect to your network. Select the wireless encryption method that you wish to use from the drop-down menu. Depending on the method that you select, you may need to congure additional settings. For more information regarding wireless encryption and how to congure it, please refer to “Wireless Security” on page 29. If you do not wish to enable wireless security, select None from the drop-down menu.Click Apply to save the current settings.DTIM Period:SSID:Hide SSID:Encryption Type:
29D-Link DWR-710 User ManualSection 3 - CongurationWireless SecurityIt is recommended that you enable wireless security on your router in order to protect your wireless network from unauthorized access. You should select a wireless security protocol that is compatible with the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP)Wired Equivalent Privacy (WEP) is an older wireless security standard, which although providing more protection than no security at all, has some weaknesses which could make it vulnerable to intrusion. It is recommended that you only use WEP if your wireless clients do not support Wi-Fi Protected Access (WPA). WEP is not supported by the 802.11n standard, and therefore you will not be able to achieve 802.11n speeds if using WEP.Encryption Type:Authentication Method:WEP Encryption Length:Key 1-4:Select WEP from the drop-down menu.Select the desired authentication method from the drop-down menu:Auto - The router will automatically determine the authentication method based on the client that is connecting to it. Open System - Clients do not require authentication in order to associate with the router. The encryption key will be used to encrypt data packets sent over the network.Shared - The encryption key is used for authentication as well as to encrypt data packets. Select the length of the encryption key to be used.64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit - A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the eld provided. Click Apply to save the current settings.
30D-Link DWR-710 User ManualSection 3 - CongurationWi-Fi Protected Access (WPA)Wi-Fi Protected Access (WPA) is a newer and more secure encryption protocol which makes signicant improvements over WEP. There are two versions of WPA; the original WPA, and the newer WPA2. Encryption Type:WPA Mode:Cipher Type:Pre-Shared KeySelect WPA Personal from the drop-down menu.Select the desired authentication method from the drop-down menu:Auto (WPA or WPA2) - The router will automatically determine the version of WPA to be used based on the client that is connecting to it. WPA - Clients will only be able to associate with the router using the WPA standard. WPA2 - Clients will only be able to associate with the router using the WPA2 standard. Clients which do not support WPA2 will not be able to associate with the router. Select the desired cipher type from the drop-down menu:TKIP - This cipher is used by the WPA standard. AES - A newer cipher used by the WPA2 standard. Use of this cipher type is required in order to achieve 802.11 speeds. The pre-shared key is the password which clients will require in order to connect to your network. Enter a password of between 8 and 63 characters in length. Click Apply to save the current settings
31D-Link DWR-710 User ManualSection 3 - CongurationWLAN Authentication and Privacy Infrastructure (WAPI)WLAN Authentication and Privacy Infrastructure (WAPI) is a wireless security standard which is implemented in China. You should only use this protocol if your wireless clients do not support any of the other security methods provided by the DWR-710.Encryption Type:WAPI Pre-Shared Key:Select WAPI Personal from the drop-down menu. Select whether your key should use ASCII or HEX characters using the drop down menu. Enter your desired key in the eld provided. Click Apply to save the current settings.
32D-Link DWR-710 User ManualSection 3 - CongurationWi-Fi Protected Setup (WPS)Check the box to enable the Wi-Fi Protected Setup feature.Select whether you wish to Congure or Uncongure the WPS function using the radio buttons.Select the WPS method that you wish to use. If your device supports Push Button Connection (PBC), simply select this option and click Apply to start the connection process. You will then have 120 seconds to press the WPS button on your wireless device in order to initiate the connection. If your device does not support PBC, you can select the PIN method and continue to the next step.A PIN is a unique number that can be used to add the router to an existing network or to create a new network. For extra security, a new PIN can be generated. Click Generate to create a new PIN. The current PIN will be shown in the eld next to Current PIN. This PIN can be used by wireless clients to join your network using the PIN method.If the device you are trying to add to the network was provided with a PIN number, select this option and enter the device’s PIN in the eld. Click Apply to commence the connection process. Enable:Congure State:Congure Method:Current PIN:Generate PIN:Enrollee PIN:Wi-Fi Protected Setup (WPS) enables you to quickly and securely add compatible devices to your wireless network.
33D-Link DWR-710 User ManualSection 3 - CongurationCheck the box to enable the MAC ltering feature. Select the ltering mode from the drop-down menu. You can choose to Deny Listed Stations access to your network, or Allow Listed Stations access.ListeD stAtioNs tAbLeTo add a new ltering rule, click Add.Check the box to activate the rule.Enter a name to identify the machine or station which will be ltered.Enter the MAC address of the machine or station which you wish to lter. Click the Delete icon to delete the rule from the table. Click OK to save the current rule and add it to the table.Click Apply to save all changes and return to the Wi-Fi page. Enable MAC Address Filter:Mode:Active:Name:MAC Address:Delete:The MAC ltering option allows you to allow or deny access to wireless clients based on their MAC address. MAC Filter
34D-Link DWR-710 User ManualSection 3 - CongurationThe Station List tab shows a list of all wireless clients currently connected to your wireless network. Station Lists
35D-Link DWR-710 User ManualSection 3 - CongurationFirewallSecurityThe Security tab allows you to congure your router’s rewall settings and enable features to protect your network from outside intrusions and malicious attacks. Click Add to add a new ltering rule. Check the box to activate the IP lter rule. Enter the source IP address to be ltered.Enter the starting port on the source IP.Enter the ending port on the source IP.Enter the destination IP address to be ltered.Enter the starting port of the destination IP.Enter the ending port of the destination IP.Select the protocol for the IP lter rule. Click the icon to delete the IP ltering rule. Click OK to save the ltering rule. Click Apply to save the current conguration.Active:Source IP:Source From Port:Source To Port:Destination IP:Destination From Port:Destination To Port:Protocol:Delete:IP Filter
36D-Link DWR-710 User ManualSection 3 - CongurationIPv6 FilterClick Add to add a new ltering rule.Check the box to active the IP lter rule. Enter the source IP address to be ltered.Enter the port for the source IP.Enter the destination IP address to be ltered.Enter the port on the destination IP.Select the protocol for the IP lter rule. Click the icon to delete the IP ltering rule. Click OK to save the current ltering rule. Click Apply to save the current conguration. Active:Source IP:Source Port:Destination IP:Destination Port:Protocol:Delete:
37D-Link DWR-710 User ManualSection 3 - CongurationMAC FilterClick Add to add a new MAC ltering rule. Select Blacklist to deny access to only the MAC addresses listed below. Select Whitelist to allow access to only the MAC addresses listed below. Check the box to activate the MAC lter rule. Enter the MAC address of the machine or device which you wish to lter packets coming from. Enter the MAC address of the machine you wish to lter packets.Check the box for each day that you wish to activate the MAC ltering rule. Enter the starting time at which you wish to activate the MAC ltering rule each day. Enter the ending time at which you wish to deactivate the MAC ltering rule each day. Click the icon to delete this MAC ltering rule. Click OK to add the current rule to the rules list. Click Apply to save the current conguration. Blacklist/Whitelist:Active:Source MAC:Destination MAC:Day:Start Time:End Time:Delete:The MAC lter lets you to allow or deny access to your wireless network based on a client’s MAC address.
38D-Link DWR-710 User ManualSection 3 - CongurationDDOSCheck the box next to the rule to enable prevention against that specic kind of DoS attack. Click Apply to save the current conguration.DoS Prevention Filters:This section allows you to enable various security features to protect against Denial of Service (DoS) attacks.
39D-Link DWR-710 User ManualSection 3 - CongurationURL FilterCheck the box to enable URL ltering.Select Blacklist to deny access to only URLs listed in the rule table. Select Whitelist to allow access to only URLs listed in the rule list. Check the box to activate the URL ltering rule. Enter the URL that you wish to allow or deny access to. If you enter a domain name, all URLs under this domain will be allowed or denied access.Click the icon to delete the rule. Click Add to save the rule and add it to the rule table. Click Apply to save the current conguration. Enable URL Filter:Blacklist/Whitelist:Active:URL:Delete:The content lter allows you to allow or deny access to specic URLs.
40D-Link DWR-710 User ManualSection 3 - CongurationAboutThis tab shows the router’s basic information.ApplicationThis tab allows you to congure the router’s administrative functions, such as time & date, remote access, and rmware. You can also access the system log.
41D-Link DWR-710 User ManualSection 3 - CongurationbACkupClick Backup to save the router’s current conguration to a le on your computer. You will then be prompted with a “save le” dialogue, where you can choose where to save the conguration le. restoreClick Browse to locate a previously saved conguration le on your computer. Once you have located the le, click Restore to congure the router according to the selected conguration le. reset to DefAuLtClick Reset to restore the router’s settings to the factory defaults.Important: All settings stored on the router will be lost following a factory reset. Conguration
42D-Link DWR-710 User ManualSection 3 - CongurationFirmware UpgradeClick Browse to locate a previously downloaded rmware le on your computer. Once the le has been located, click Update to carry out the rmware upgrade process.Important: All current settings will be restored to their factory defaults following a rmware upgrade. You can upgrade the rmware of the router here. Make sure the rmware le you want to use is on the local hard drive of the computer. Please check your local D-Link support site or http://support.dlink.com for rmware updates and language packs.
43D-Link DWR-710 User ManualSection 3 - CongurationStandby ModeThis section allows you to congure the router’s automatic power-saving modes. Check the box to enable the automatic power saving features.Enter the number of minutes after which the router will enter standby mode if no activity is detected.Enter the number of minutes after which the router will enter hibernate mode if no activity is detected.Enter the number of minutes after which the router will shut down if no activity is detected. Click Apply to save the current conguration. Enable Auto Power Saving:Enter Standby Mode:Enter Hibernate Mode:Auto Power O:
44D-Link DWR-710 User ManualSection 3 - CongurationPasswordSelect whether you wish to change the password for the admin or user account from the drop down menu. Enter the existing password for this account.Enter the new password for this account.Type the new password again to conrm. Click Apply to save the current conguration. Select the user to change password:Old Password:New Password:Retype New Password:This page lets you change the conguration interface passwords for the Administrator (Admin) and User accounts.
45D-Link DWR-710 User ManualSection 3 - CongurationDAteDisplays the current time and date according to the router’s system clock.Select Manual to manually set the time and date, or select Get from Time Server to have the router automatically synchronize the time with a Network Time Protocol (NTP) server. If you selected Manual mode, enter the current time.If you selected Manual mode, enter the current date. If you selected Get time From Server, select the desired time protocol from the drop-down menu. Enter up to four NTP server addresses which will be used to synchronize the router’s system time and date. Click Apply to save the current settings. Current System Time:Mode:New Time:New Date:Time Protocol:Time Server Address 1-4:Date and TimeThis page lets you set the time and date for your router, and also congure automatic time synchronization and daylight savings time.
46D-Link DWR-710 User ManualSection 3 - CongurationTime Zone:Enable Daylight Saving:Start Date:End Date:time ZoNeSelect your time zone from the drop-down menu. Check the box to enable automatic adjustment for daylight saving.Enter the details of the starting date and time for daylight saving time in your region. Enter the details of the ending date and time for daylight saving time in your region. Click Apply to save the current settings.
47D-Link DWR-710 User ManualSection 3 - CongurationLanguageLanguage: Select your preferred language from the drop-down menu.Click Apply to save the current conguration.
48D-Link DWR-710 User ManualSection 3 - CongurationSystem LogEnable Log:Refresh:Clear Log:Display Log Level:Log settiNgCheck the box to enable the router’s log-keeping function. Click Apply to save the current conguration.Log DispLAyClick to update the log display.Click to clear all log entries.Select the level of log event which you wish to view from the drop-down menu. The system log displays a record of all events which occur while the router is running.
49D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkIt is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar, next to the time display. ¨ Wireless IconClicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name.Connecting to a Wireless NetworkUsing Windows 8
50D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected.
51D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkConnecting to a Wireless NetworkUsing Windows 7 Windows 7 users may use the built-in wireless utility to connect to a wireless network. If you are using another company’s utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows 7 utility as seen below.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. You can also click on the wireless icon in your system tray (lower-right corner).The utility will display any available wireless networks in your area. Wireless
52D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkHighlight the wireless network (SSID) you would like to connect to and click the Connect button.If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to “Networking Basics” on page 66 for more information.
53D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkConguring Wireless SecurityIt is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. The utility will display any available wireless networks in your area.1. Click on the wireless icon in your system tray (lower-right corner).Wireless
54D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless Network3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button.4. The following window appears while your computer tries to connect to the router.
55D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless Network5. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
56D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkUsing Windows Vista™Windows® Vista™ users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® Vista™ utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to “Networking Basics” on page 66 for more information.
57D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkConguring Wireless SecurityIt is recommended to enable wireless security (WEP/WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® Vista™ Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
58D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless Network3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
59D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkConnect to a Wireless NetworkUsing Windows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to “Networking Basics” on page 66 for more information.
60D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkCongure WEPIt is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks.
61D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the same WEP key that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router.
62D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless NetworkCongure WPA-PSKIt is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks.
63D-Link DWR-710 User ManualSection 4 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
64D-Link DWR-710 User ManualSection 5 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DWR-710. Read the following descriptions if you are having problems.1. Why can’t I access the web-based conguration utility?When entering the IP address of your router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Internet Explorer 8 or higher, Chrome 19.0, Firefox 12.0, or Safari 4.0.• If attempting to connect wirelessly, ensure that the wireless icon on LED is illuminated. Also, ensure that you are connected to the correct SSID for your mobile router. • Make sure that the computer you are using is not connected to any other devices (such as routers or switches) which might have the same IP address as the DWR-710, as this may cause an IP address conict. If you have a conict, temporarily unplug any other devices from your computer while you congure the DWR-710. You can also change the IP address of the DWR-710 in the Network section of the conguration utility. Please refer to “Wi-Fi” on page 22 for further information on changing the IP address. You may also need to renew your computer’s IP address conguration. To do this, start the Command utility: Click on Start > Run. In the run box type cmd and click OK. (Windows Vista users type cmd in the Start Search box.) This will bring up a black screen with white text. At the command prompt, type ipcong /release and wait for the process to be completed. Next, type ipcong /renew which will renew your computer’s IP address conguration. • Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
Reset Button65D-Link DWR-710 User ManualSection 5 - Troubleshooting• Congure your Internet settings: - Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the Default Level button to restore the settings to their defaults. - Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. - Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. - Close your web browser (if open) and re-open it.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. Please note that this process will change all your settings back to the factory defaults.To reset the router, rst remove the back cover of the router to expose the battery. Using a paperclip or similar object, press and hold the reset button, which is located inside the hole to the upper-left of the SIM card slot (see diagram). The DWR-710 will restore the factory default settings. Wait about 30 seconds for the router to restart before you attempt to reconnect to it. The default IP address is 192.168.0.1, and the default username is admin and the password should be left blank.
66D-Link DWR-710 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK. (Windows® Vista™ users type cmd in the Start Search box.)At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.
67D-Link DWR-710 User ManualAppendix B - Networking BasicsStatically Assign an IP addressStep 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.Click on Start > Control Panel > Network and Internet Connections > Network Connections > Congure your Internet Protocol (IP) settings.Step 1If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Windows® 8Windows® 7Windows® Vista™Windows® XPClick on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.Click on Start > Control Panel > Network Connections.
HSUPA/HSPDA/UMTS: 850/900/1900/2100 MHz68D-Link DWR-710 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsRadio Frequency Bands• • EDGE/GPRS/GSM: 850/900/1800/1900 MHz• Power Class 4 (850/900 MHz)Cellular Access• HSPA+• Downlink: 21 Mbps• Uplink: 11 MbpsWi-Fi Access Point• 802.11n (150 Mbps compatible)• 802.11g (54 Mbps)• 802.11b (11 Mbps)Antennas• Internal 3G main antenna• Internal 3G diversity antenna• Internal Wi-Fi antennaUSB Interface• micro USB portUSIM Slot• Standard 6-pin SIM card interfaceStatus Indicators• Signal LED• Wi-Fi LED Storage• microSD card slotWireless Security• Built-in rewall • WEP/WPA/WPA2Firewall• Network Address Translation (NAT)Dimensions (L x W x H)• 91.5 x 27 x 11 mm (3.60 x 1.06 x 0.43 inches)Weight• 25 grams (0.88 ounces)Operating Temperature• 0 to 40 °C (32 to 104 °F)Certications• FCC/CE• Wi-Fi Certied
have the Positive Opinion of Notied Body:The device Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive and All the reports of the applied standardsSpecific Absorption Rate (SAR)Users have to use the connection to USB interfaces with USB 2.0 version or higher.To comply with radiofrequency radiation (RF) exposure guidelines during body worn operation, this device must be used with a minimum of 0.5 69D-Link DWR-710 User ManualAppendix D - Safety. . .This mobile device is a radio transmitter and receiver. It is not designed to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientic organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The guidelines use a unit of measurement known as the Specic Absorption Rate, or SAR.The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested complied with this limit.cm separation from the body.Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits.Warnings and Declarations WarnigCEPHONEIX TESTLAB, Königswinkel 10 D-32825 Blomberg, Germany
FCC RegulationsCaution:WarnigFCC 70D-Link DWR-710 User ManualAppendix D - Safety This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may n ot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
FCC RF exposure guidelines for USB dongle, as described in this user guide, is 0.65W/kg.product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested pertested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in hostSAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and www.fcc.gov/oet/ea/fccid after searching on FCC ID: KA2WR710B1.RF Exposure Information (SAR)71D-Link DWR-710 User ManualAppendix D - Safety. . . This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on le with the FCC and can be found under the Display Grant section of

Navigation menu