D Link WA135A1 Wireless N USB adapter User Manual Warning statements

D Link Corporation Wireless N USB adapter Warning statements

UserManual.wiki >

D Link >

WA135A1 User Manual

User Manual

Document Created by Nick SchusterWireless N USB adapterDWA-135, DWA-135A1

D-Link DWA-135 User Manual Page 3Product OverviewPackage Contents• D-Link DWA-135 802.11n Wireless N USB Adapter.• User Manual and Warranty on CD-ROM.• Printed Quick Installation Guide.• Software on CD-ROM.If any of the above items are missing, please contact your reseller.System RequirementsFor best results, the following system requirements are recommended:• Computer with: 1GHz processor / 512 MB RAM / CD-ROM drive / USB 2.0 Port.• Windows ® 2000 (with Service Pack 4), Windows ® XP (with Service Pack 2), Windows ® Vista™ or Windows ® 7.• An 802.11n (Draft 2.0) Access Point or Wireless Router.

D-Link DWA-135 User Manual Page 4IntroductionThe DWA-135 802.11n Wireless N USB Adapter is a convenient wireless connectivity solution for desktop or notebook PCs. Instead of stringing Ethernet cables to your PC or dismantling your desktop computer case, the DWA-135 can enable 802.11n wireless connectivity by simply utilizing your desktop or notebook PC’s USB port.Powered by RangeBooster N™ technology, the DWA-135 provides a faster wireless connection and superior reception than 802.11g*. The DWA-135 is designed for use in bigger homes and for those that demand higher networking. Maximize wireless performance by connecting this USB Adapter to a RangeBooster N™ router and stay connected from virtually anywhere in the home. This USB Adapter supports WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed.Compact in size, robust in speed the DWA-135 Wireless N USB Adapter is great for travel and a convenient solution for providing high performance wireless connectivity to your desktop or notebook PC. Enjoy the many beneﬁts of wireless connectivity today!* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n speciﬁcations. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.Features• Wireless 802.11n complaint and backwards compatible with 802.11b/g standards.• High-Speed USB 2.0 Standard and requires no additional external power source.• Convenient Plug & Play installation.• Compact size for easy placement around the computer.• Supports Wireless encryptions like Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA/WPA2).• Support Wireless authentication methods like 802.1X.• Support Wireless Infrastructure and Ad-Hoc topologies.• MIMO (2 x 2) technology for extended reception robustness and exceptional throughput.• Support IEEE 802.11e Quality of Service (QoS) Wi-Fi Multimedia (WMM).• MIMO Power Saving mechanism.• Channel management and co-existence.Here is a list of features that can be found on the D-Link DWA-135 802.11n Wireless N USB Adapter:• Bandwidth transmissions in both 20 MHz and 40 MHz.• Maximum data rate of 54 Mbps (802.11g) and 300 Mbps (802.11n).• Support Fast Receiver Automatic Gain Control (AGC).

D-Link DWA-135 User Manual Page 5Hardware Overview

D-Link DWA-135 User Manual Page 6Wireless Installation ConsiderationsThe D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45 degree angle appears to be almost 3 feet (1 meter) thick. At a 2 degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (ﬁsh tanks), mirrors, ﬁle cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.

D-Link DWA-135 User Manual Page 7Basic InstallationInstalling the DWA-135 AdapterThis section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled.Before installing the wireless adapter, please note that you have to install the software ﬁrst BEFORE plugging the wireless adapter into the USB port of the computer. Not doing this might cause the wireless adapter not to function correctly. Turn on the computer and insert the CD (included in the package contents of this product) in the CD-ROM of the computer. Installed on the CD is an auto-run application that allows the user to quickly access the contents of the CD easily.When the content application appears, click on the ‘Install Drivers’ option to start the installation of the required software and drivers for this product.Step 1:This is the welcome screen. To continue with the installation click on the ‘Next’ button.Step 2:

D-Link DWA-135 User Manual Page 8The utility will install the drivers and the accompanying ﬁles in the D-Link > DWA-135 folder. To change the destination of the installed ﬁles click on the ‘Browse’ button and navigate to the desired destination folder.To continue with the installation click on the ‘Next’ button.Step 3:At this point the user is prompt to insert the DWA-135 adapter into the computer for the ﬁrst time. The Operating System will automatically initiate a universal wireless adapter driver installation process. Cancel the automatic driver installation initiated by the Operating System and continue to the to the next step of this installation by clicking on the ‘Next’ button.Step 4:

D-Link DWA-135 User Manual Page 9This utility will automatically install all the required ﬁles in the destination speciﬁed.Step 5:When the installation has been completed, a window will appear thanking the user for purchasing the DWA-135.There are two ways to connect to the wireless network using this adapter:1. By using the Operating System’s built-in wireless utility.2. By using the Wi-Fi Protected Setup (WPS) button connection method.Click on the ‘Finish’ button to complete this setup.Step 6:

D-Link DWA-135 User Manual Page 10Connect to the Wireless NetworkThis section will guide the user through the process of connecting to the wireless network using this wireless adapter. Remember that there is no additional wireless connection utility included with this product. This product makes use of the built-in wireless functionality of the Operating System.Connect using Windows 7Generally after the installation a wireless icon will appear in the startbar’s system tray that look like this .Click on this icons and the list of available wireless networks will be displayed. Locate your network and click on it. Click on the ‘Connect’ button to connect to your wireless network.Step 1:If you have a wireless security enabled on your network, you’ll be prompted to enter the ‘Security Key’ and click on the ‘OK’ button to connect to your wireless network.Note: Windows 7 will automatically detect what type of security is used by the wireless network. Step 2:

D-Link DWA-135 User Manual Page 11Connect using Windows 7 and WPSWi-Fi Protected Setup (WPS) System is designed for easy setup of security-enabled Wi-Fi networks. It is recommended to have the access point or wireless router nearby during setup. For more information on WPS, visit the Wi-Fi Alliance website at www.wi-ﬁ.org.“Push Button Conﬁguration” (PBC) is a button on the adapter that after pressed connects you to other WPS-enabled devices. A connection can be established by pressing the button on the DWA-135 and then pressing the physical button on the access point or wireless router within 120 seconds. If the wireless access point or router does not have a physical button located on the device, it should have a ‘Virtual button’ on it’s conﬁguration. For more information about the Virtual button of a Wireless access point or router refer to the unit’s manual of contact the Vendor.2. Press the WPS button located on your access point or router to continue. 1. To connect to your network, press the WPS button on the adapter and hold for 2 seconds until the wizard screen appears.3. After pressing both buttons a window will appear stating to ‘Please push the WPS button on your router’, ‘Discovering push button device’ and lastly ‘Connecting...’ After 120 seconds the DWA-135 should be connected to your wireless network.

D-Link DWA-135 User Manual Page 12Connect using Windows XPGenerally after the installation a wireless icon will appear in the taskbar’s notiﬁcation area that look like this .Right click on this icon and select the ‘View Available Wireless Networks’ option. A list of available wireless networks will be displayed. Locate your network and click on it. Click on the ‘Connect’ button to connect to your wireless network.Step 1:If you have a wireless security enabled on your network, you’ll be prompted to enter and conﬁrm the ‘Network Key’ and click on the ‘Connect’ button to connect to your wireless network.Note: Windows XP will automatically detect what type of security is used by the wireless network. Step 2:

D-Link DWA-135 User Manual Page 13Knowledge BaseIn this section we’ll discuss the theory behind Wireless Basics, Wireless Modes, Networking Basics and Wireless Security.Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and ofﬁce environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efﬁciently. Increased mobility and the absence of cabling and other ﬁxed infrastructure have proven to be beneﬁcial for many users.Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.What is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or ofﬁce network.Why D-Link Wireless?D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.How does wireless work?Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).

D-Link DWA-135 User Manual Page 14Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many otheroutdoor venues.Wireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless?Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, ofﬁce, business, D-Link has a wireless solution for it.Home• Gives everyone at home broadband access• Surf the web, check email, instant message, and etc• Gets rid of the cables around the house• Simple and easy to useSmall Ofﬁce and Home Ofﬁce• Stay on top of everything at home as you would at ofﬁce• Remotely access your ofﬁce network from home• Share Internet connection and printer with multiple computers• No need to dedicate ofﬁce spaceWhere is wireless used?Wireless technology is expanding everywhere not just at home or ofﬁce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link USB Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.Wireless network is easy to setup, but if you’re installing it for the ﬁrst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.

D-Link DWA-135 User Manual Page 15TipsHere are a few things to keep in mind, when you install a wireless network. Centralize your router or Access PointMake sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate InterferencePlace home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signiﬁcantly reduce any interference that the appliances might cause since they operate on same frequency.SecurityDon’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.Wireless ModesThere are basically two modes of networking:• Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer. Unfortunately 802.11g/n products such as the DWA-135 do not support ad-hoc mode.An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point.An Ad-Hoc* network contains only clients, such as laptops with wireless USB Adapters. All the adapters must be in Ad-Hoc mode to communicate.* Not supported with the DWA-135.

D-Link DWA-135 User Manual Page 16Networking BasicsCheck your IP addressAfter you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the steps below.Microsoft Windows 7:• Click Start > All Programs > Accessories > Command Prompt. You may need administrative access to run this application.• At the prompt, type ‘ipconﬁg’ and press Enter.• This will display the IP address, subnet mask, and default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some ﬁrewall software programs may block a DHCP request on newly installed adapters.Microsoft Windows XP/2000:• Click on Start > Run. In the run box type ‘cmd’ and click ‘OK’.• At the prompt, type ‘ipconﬁg’ and press Enter.• This will display the IP address, subnet mask, and the default gateway of your adapter.

D-Link DWA-135 User Manual Page 17Statically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Microsoft Windows 7:• Click on Start > Control Panel. Click on the ‘Network and Sharing Center’ icon. Along the left panel in the window, click on ‘Change adapter settings’.• Right-click on the Wireless Network Connection which represents your D-Link wireless network adapter which will be connected to your network and click Properties.• Highlight ‘Internet Protocol Version 4 (TCP/IPv4)’ and click Properties.• Click ‘Use the following IP address’ and enter an IP address that is on the same subnet as your network or LAN IP address on your router or network. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network.• Set Default Gateway the same as the LAN IP address of your router or gateway.• Set Primary DNS the same as the LAN IP address of your router or gateway.• The Secondary DNS is optional (you may enter a DNS server from your ISP).• Click OK to save your settings.

D-Link DWA-135 User Manual Page 18Microsoft Windows XP/2000:• Windows XP - Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections icon.• Windows 2000 – From the desktop, right-click My Network Places > Properties.• Right-click on the Wireless Network Connection which represents your D-Link wireless network adapter (or other adapter) which will be connected to your router and click Properties.• Highlight ‘Internet Protocol (TCP/IP)’ and click Properties.• Click ‘Use the following IP address’ and enter an IP address that is on the same subnet as your network or LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network.• Set Default Gateway the same as the LAN IP address of your router or gateway.• Set Primary DNS the same as the LAN IP address of your router or gateway.• The Secondary DNS is optional (you may enter a DNS server from your ISP).• Click OK to save your settings.

D-Link DWA-135 User Manual Page 19Wireless SecurityWPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).The 2 major improvements over WEP:• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-speciﬁc MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.

D-Link DWA-135 User Manual Page 20TroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DWA-135. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows 7. If you have a different Windows Operating System, the screenshots on your computer should look similar to the following examples.)Is the adapter installed correctly?For a user to verify whether the wireless adapter is working correctly we need to navigate to the Device Manager found in Windows. The easiest way to ﬁnd the Device Manager is to Right-Click on the Computer icon, found on the Desktop and to click on ‘Properties’.Step 1:The System windows, found in the Control Panel, will be opened. Here the user must click on the ‘Device Manager’ option found on the left.Step 2:

D-Link DWA-135 User Manual Page 21In the Device Manager window, all the hardware devices installed in the computer will be displayed. Navigate to ‘Network Adapters’ and Right-Click on the ‘D-Link DWA-135 Wireless N USB Adapter’ option.Click on ‘Properties’.Step 3:The Properties window of the adapter will open. In the ‘Device Status’ space, the following message will be displayed when the DWA-135 adapter is working correctly: ‘This device is working properly.’Click ‘OK’ to close this window.Step 4:

D-Link DWA-135 User Manual Page 22Adapter is not recognized by the Computer.In the event when the DWA-135 Wireless N USB Adapter is not correctly recognized by the computer, make sure that the DWA-135 is properly seated in the computer’s USB port. If Windows still does not detect the hardware upon re-insertion of the adapter, try to uninstall and re-install the drivers for this adapter. Also try to use a different USB port.Not connecting to the Wireless Network/Internet.When the correctly installed wireless adapter is not connecting to the wireless network and in turn not connecting to the Internet the following things can be checked:• Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem with the broadband connection.• Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and Ethernet cables are ﬁrmly connected.• Check that the IP Address, subnet mask, gateway, and DNS settings are correctly entered for the network• In Infrastructure mode, make sure the same Service Set Identiﬁer (SSID) is speciﬁed on the settings for the wireless clients and access points. (Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)• Check that the Network Connection for the wireless client is conﬁgured properly. Navigate to the Control Panel, Network and Sharing Center and click on the Manage Wireless Networks Option. Double-click on your conﬁgured wireless network and make sure that the settings are correct.• If Security is enabled, make sure that the correct encryption keys are entered on both the DWA-135 and the access point.

D-Link DWA-135 User Manual Page 23Technical SpesiﬁcationsSYSTEM REQUIREMENTS• Windows 7 / Vista / XP SP2 or 2000 SP4• CD-ROM drive• 20MB hard disk space• Available USB portSTANDARDS• IEEE 802.11n (draft)• IEEE 802.11g• IEEE 802.11b• USB 2.0FREQUENCY RANGE• 2.412 to 2.462 GHz (North America)• 2.412 to 2.472 GHz (General Europe)EMISSION SCHEMES• DSSS, OFDMDATA MODULATION SCHEMES• DBPSK, DQPSK, CCK and OFDM (BPSK/QPSK/16-QAM/64-QAM)DATA RATES1• 802.11n: 30/60/90/120/180/240/270/300Mbps• 802.11g: 6/9/12/18/24/36/48/54Mbps• 802.11b: 1/2/5.5/11MbpsTRANSMIT OUTPUT POWER• 14dbm (802.11 g/n), 18dbm (802.11 b)SECURITY• 64/128-bit WEP data encryption• Wi-Fi Protected Access (WPA, WPA2), 802.1XOPERATING VOLTAGE• 5VDC +/- 10%POWER CONSUMPTION (802.11n)• TX: 472mA, RX: 165mADIAGNOSTIC LEDS• ActivityOPERATING TEMPERATURE• 0º to 40º CSTORAGE TEMPERATURE• -20º to 65º COPERATING HUMIDITY• 10% to 90% non-condensingSTORAGE HUMIDITY• 5% to 95% non-condensingCERTIFICATIONS• FCC Class B, CE, C-Tick, ICDIMENSIONS• 114.3 x 54 x 8.7mm (L x W x H)1. Maximum wireless signal rate derived from IEEE Standard 802.11g speciﬁcations. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.FCC 15B/ FCC 15C/ FCC SAR RSS-210 CE EN300328/ EN301489-1-17/ CE SAR LP0002 AS/NZS 4268 5VDC +/- 5% 11b : 21.0 dBm 11g : 25.9 dBm 802.11n (20MHz): 28.5 dBm 802.11n (40MHz): 26.9 dBm2.412 to 2.462 GHz (USA/ CANADA/ TAIWAN) 2.412 to 2.472 GHz (General Europe/ Australia)11b : 20.0 dBm 11g : 22.69 dBm 11n: 25.39 dBm

D-Link DWA-135 User Manual Page 24Contacting Technical SupportU.S. and Canadian customers can contact D-Link technical support through our web site or by phone.Before you contact technical support, please have the following ready:• Model number of the product (e.g. DWA-135)• Hardware Revision (located on the label on the bottom of the switch (e.g. rev A1))• Serial Number (s/n number located on the label on the bottom of the device).You can ﬁnd software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.For customers within the United States:Phone Support:(877) 453-5465Internet Support:http://support.dlink.comFor customers within Canada:Phone Support:(800) 361-5265Internet Support:http://support.dlink.com

D-Link DWA-135 User Manual Page 25WarrantySubject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor.• Only for products purchased and delivered within the ﬁfty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.Limited Warranty:D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.• Hardware (excluding power supplies): One (1) year• Free Technical Support - Basic Installation: Ninety (90) daysThe customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, atD-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Ofﬁce. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.Limited Software Warranty:D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional speciﬁcations for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional speciﬁcations for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the

D-Link DWA-135 User Manual Page 26original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is ﬁrst returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.Non-Applicability of Warranty:The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.Submitting A Claim:The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufﬁcient detail to allow D-Link to conﬁrm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/.• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.What Is Not Covered:The Limited Warranty provided herein by D-Link does not cover:Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modiﬁcation, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or

D-Link DWA-135 User Manual Page 27removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, ﬁrmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Ofﬁce. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.Disclaimer of Other Warranties:EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.Limitation of Liability:TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.Governing Law:This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides speciﬁc legal rights and you may also have other rights which vary from state to state.

D-Link DWA-135 User Manual Page 28Trademarks:D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.Copyright Statement:No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.Copyright ©2010 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.CE Mark Warning:This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.Federal Communication Commission (FCC) Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. this device may not cause harmful interference, and2. this device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.

D-Link DWA-135 User Manual Page 29RegistrationProduct registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.

Federal Communication Commission Interference Statement This eq uipment has be en tested and found to co mply with the limit s for a Class B digit al device, pu rsuant to Part 15 of the FCC Rule s. These limit s are d esigned to provid e reasonable protection against ha rmful interfe rence in a residential in stallation. Thi s equipment generates, uses and c an radiate ra dio frequency energy and, if not inst alled and used in a ccordance with the in structions, may cau se harmful interfe rence to ra dio communications. Howe ver, there is no guara ntee that interferen ce will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can b e determin ed by turn ing the equip ment of f and on, the use r is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two conditions: (1) This d evice may not cause har mful interfere nce, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any change s or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IEEE 802.1 1b or 802. 11g operation of this produc t in the U.S.A. is firm ware-limited to channels 1 through 11. IMPORTANT NOTE: FCC Radiation Exposure Statement: This eq uipment compli es with FCC radiation exposure limits set forth for an un controlled environment. End users must fo llow the spe cific o perating in structions for satisfying RF exposure co mpliance. T o maintai n compliance with F CC RF exposure co mpliance requirements, please follow operation instruction as documented in this manual. This transmitter must not be co-lo cated or operating in conjunction with any oth er antenna or transmitter. SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited.

$,QGXVWU\&DQDGD6WDWHPHQW7KLVGHYLFHFRPSOLHVZLWK566RIWKH,QGXVWU\&DQDGD5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVWKLVGHYLFHPD\QRWFDXVHLQWHUIHUHQFHDQGWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQRIWKHGHYLFH,03257$17127(,&5DGLDWLRQ([SRVXUH6WDWHPHQW7KLVHTXLSPHQWFRPSOLHVZLWK,&UDGLDWLRQH[SRVXUHOLPLWVVHWIRUWKIRUDQXQFRQWUROOHGHQYLURQPHQW(QGXVHUVPXVWIROORZWKHVSHFLILFRSHUDWLQJLQVWUXFWLRQVIRUVDWLVI\LQJ5)H[SRVXUHFRPSOLDQFH7RPDLQWDLQFRPSOLDQFHZLWK,&5)H[SRVXUHFRPSOLDQFHUHTXLUHPHQWVSOHDVHIROORZRSHUDWLRQLQVWUXFWLRQDVGRFXPHQWHGLQWKLVPDQXDOאՀᤞ፿ᔞش؀᨜چ೴ʳʳᆖীڤᎁᢞٽ௑հ܅פ෷୴᙮ሽᖲΔॺᆖ๺ױΔֆ׹Ε೸ᇆࢨࠌشृ݁լ൓ᖐ۞᧢ޓ᙮෷ΕףՕפ෷ࢨ᧢ޓ଺๻ૠհ௽ࢤ֗פ౨Ζʳʳ܅פ෷୴᙮ሽᖲհࠌشլ൓ᐙ᥼ଆ౰ڜ٤֗եឫٽऄຏॾΙᆖ࿇෼ڶեឫ෼ွழΔᚨمܛೖشΔࠀޏ࿳۟ྤեឫழֱ൓ᤉᥛࠌشΖছႈٽऄຏॾΔਐࠉሽॾऄ๵ࡳ܂ᄐհྤᒵሽຏॾΖ܅פ෷୴᙮ሽᖲႊݴ࠹ٽऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭شሽंᘿ୴ࢤሽᖲ๻ໂհեឫΖʳ$

D Link WA135A1 Wireless N USB adapter User Manual Warning statements

D Link Corporation Wireless N USB adapter Warning statements

User Manual

Navigation menu

Namespaces

Views

Navigation