D Link TW1130 Wireless VPN Router User Manual di714P manual 1 31

D Link Corporation Wireless VPN Router di714P manual 1 31

User Manual Part 6

114I have two DI-824VUP Routers, how can I set them up to work witheach other? (continued)Frequently Asked Questions (continued)Step 8 The device will restart. Click onthe Continue button.Step 9 Click on Select IKE Proposal.Step 10 Enter a name for proposal IDnumber 1 and select Group 1, 2, or 5from the DH Group dropdown menu.
115I have two DI-824VUP Routers, how can I set them up to work witheach other? (continued)Frequently Asked Questions (continued)Step 11 Select DES or 3DES as theEncryption Algorithm.Step 12 Select SHA-1 or MD5 as theAuthentication Algorithm.Step 13 Enter a Lifetime value of 2800and then either select Sec. or KByte asthe unit for the lifetime value.
116I have two DI-808HV Routers, how can I set them up to work witheach other? (continued)Frequently Asked Questions (continued)Step 15 The device will restart. Clickon the Continue button.Then click Back.Step 14 Select 1 out of the ProposalID dropdown menu and click Add To,which will add the proposal that was justconfigured to the IKE Proposal Index.Click Apply.Step 16 Click on Select IPSecProposal.
117I have two DI-824VUP Routers, how can I set them up to work witheach other?(continued)Frequently Asked Questions (continued)Step 17 Enter a name for proposal IDnumber 1 and select Group 1, 2, 5, orNone from the DH Group dropdownmenu.Step 18 Select ESP or AH as theEncapsulation Protocol.Step 19 Select DES or 3DES as theEncryption Algorithm.
118Step 20 Select SHA-1, MD5, or Noneas the Authentication Algorithm.I have two DI-824VUP Routers, how can I set them up to work witheach other? (continued)Frequently Asked Questions (continued)Step 21 Enter a Lifetime value and theneither select Sec. or KB as the unit forthe lifetime value.Step 22 Select 1 out of the ProposalID dropdown menu and click Add To,which will add the proposal that was justconfigured to the IPSec Proposal Index.Click Apply and the device will restart.
119Step 23 Follow these instructions to configure your other DI-824VUP using theexact same settings for the IKE Proposal and the IPSec Proposal. Also make surethat Step 4 is configured to reflect the LAN settings for what is now the Local DI-824VUP and that Steps 5 & 6 are configured to reflect the Subnet and WAN IP ofwhat is now the remote DI-824VUP.Step 24 To establish the connection, open a command prompt and ping an IPaddress of a computer on the remote LAN. Once you receive replies the tunnel hasbeen established.I have two DI-824VUP Routers, how can I set them up to work witheach other? (continued)Frequently Asked Questions (continued)You need to first configure your DI-824VUP router.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter?Step 1 Log into the Web-basedconfiguration of the router by typing inthe IP address of the router (default:192.168.0.1) in your web browser. Bydefault the username is “admin” and thereis no password.Step 2 Click the VPN button on the leftcolumn, select the checkbox to Enablethe VPN, and then in the box next toMax. number of tunnels, enter themaximum numbers of VPN tunnels thatyou would like to have connected.
120Step 3 In the space provided, enter theTunnel Name for ID number 1, select IKE,and then click More.Frequently Asked Questions (continued)Step 4 In the Local Subnet and LocalNetmask fields enter the networkidentifier for DI-824VUP´s LAN and thecorresponding subnet mask.Step 5 In the Remote Subnet andRemote Netmask fields enter thenetwork identifier for the DI-804V or DI-804HV’s LAN and the correspondingsubnet mask. Click Apply.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)
121Step 7 In the Remote Gateway fieldenter the WAN IP address of the remoteDI-804V or DI-804HV and in thePreshare Key field, enter a key whichmust be exactly the same as thePreshare Key that is configured on theDI-804V or DI-804HV.Frequently Asked Questions (continued)Step 10 Select 3DES as theEncryption Algorithm and SHA-1 as theAuthentication Algorithm.Step 8 Click Apply and then click onSelect IKE Proposal.Step 9 Enter a name for proposal IDnumber 1 and select Group 2 from theDH Group drop down menu.Step 11 Enter a Lifetime value of 28800and then select Sec. as the unit for thelifetime value.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)Step 6 The device will restart. Click onthe Continue button.
122Frequently Asked Questions (continued)How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)Step 12 Select 1 out of the Proposal IDdropdown menu and click Add To, whichwill add the proposal that was justconfigured to the IKE Proposal Index.Click Apply.Step 13 The device will restart. Clickon the Continue button.Step 14 Click Back and click onSelect IPSec Proposal.Step 15 Enter a name for proposal IDnumber 1 and select None from the DHGroup drop-down menu.Step 16 Select ESP as theEncapsulation Protocol.
123Frequently Asked Questions (continued)Step 17 Select 3DES as theEncryption Algorithm and MD5 as theAuthentication Algorithm. Click Apply.Step 18 Enter a Lifetime value of 3600and then select Sec. as the unit for thelifetime value.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)Step 19 Select 1 out of the ProposalID dropdown menu and click Add To,which will add the proposal that wasjust configured to the IPSec ProposalIndex. Click Apply. The device willrestart. Click on the Continue button.
124Frequently Asked Questions (continued)Next you need to configure the DI-804V or DI-804HV Router.Step 1 Access the router’s web configuration by entering the router’s IP address inyour web browser. The default IP address is 192.168.0.1. Login using your password.The default username is “admin” and the password is blank.Step 2 Click on Basic Setup and then select Device IP Settings on the left.Step 3 Change the LAN IP address sothat it is on a different subnet than theLAN of the DI-824VUP.Step 4 Click Next until you reach theSave & Restart screen. Click Save &restart and then click Basic Setup onceuntil the unit has rebooted.Step 5 Click on VPN Settings.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)Step 6 Name your VPN connection andclick ADD.Step 7 In Remote IP Network andRemote IP Netmask fields enter thenetwork identifier and correspondingsubnet mask of the DI-824VUP´s LAN.Step 8 In the Remote Gateway IP fieldenter the WAN IP address of the DI-824VUP and make sure that theNetwork Interface is set to WANEthernet.Step 9 Verify that Secure Association is set to IKE and that Perfect Forward Secure isDisabled.
125Frequently Asked Questions (continued)Step 10 Verify the Encryption Protocolis set to 3DES and enter in yourPreshared Key.Note: The Preshared Key needs to beidentical to the one configured on theDI-824VUP.Step 11 Leave the Key Life and IKE LifeTime values at their default levels and clickSAVE.Step 12 Click Next and then click onSave & Restart.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVRouter? (continued)After you have configured both routers, you need to establish a connection.Step 1 Open a command prompt andfrom a computer on the internal LAN ofthe DI-824VUP and ping the IP addressof a computer that is on the internal LANof the DI-804V or DI-804HV, or viceversa.Step 2 Once you begin to receivereplies, the VPN connection has beenestablished.
126Frequently Asked Questions (continued)Step 5 When the VPN has beenestablished the Status will be Active.Step 3 To view the Status of the VPNon the DI-804V or DI-804HV, click onDevice Status.Step 4 From the Device Status screenclick on VPN Status.How can I set up my DI-824VUP to work with a DFL-300 Firewall?You need to first configure your DI-824VUP router.Step 1 Log into the web based configuration of the router by typing in the IP address ofthe router (default: 192.168.0.1) in your web browser. By default the username is “admin”and there is no password.Step 2 Click the VPN button on the left column, select the checkbox to Enable theVPN, and then in the box next to Max. number of tunnels, enter the maximum numbersof VPN tunnels that you would like to have connected.How can I set up my DI-824VUP to work with a DI-804V or DI-804HVrouter? (continued)

Navigation menu