D Link SL2740BF1 WIRELESS 802.11n ADSL2/2+ 4-PORT ETHERNET ROUTER User Manual DSL 2740B F1 Manual 1 00 2011 06 14

D Link Corporation WIRELESS 802.11n ADSL2/2+ 4-PORT ETHERNET ROUTER DSL 2740B F1 Manual 1 00 2011 06 14

Users Manual

Table of Content D-Link DSL-2740B User Manual 1
Table of Content D-Link DSL-2740B User Manual 2Table of ContentsPACKAGE CONTENTS.....................................................................................................4 SYSTEM REQUIREMENTS................................................................................................5 INTRODUCTION..............................................................................................................6 FEATURES......................................................................................................................7 HARDWARE OVERVIEW.................................................................................................8 Connections ...........................................................................8 LEDs........................................................................................9 INSTALLATION............................................................................10 BEFORE YOU BEGIN...................................................................................................10 INSTALLATION NOTES.................................................................................................11 INFORMATION YOU WILL NEED FROM YOUR ADSL SERVICE PROVIDER....................13 INFORMATION YOU WILL NEED ABOUT DSL-2740B..................................................15 WIRELESS INSTALLATION CONSIDERATIONS.............................................................17 DEVICE INSTALLATION................................................................................................18 POWER ON ROUTER....................................................................................................18 NETWORK CONNECTIONS...........................................................................................19 1. CONFIGURATION....................................................................21 1-1 WEB-BASED CONFIGURATION UTILITY................................................................21 SETUP .......................................................................................................................23 WIZARD.................................................................................23 INTERNET SETUP ................................................................28 WIRELESS.............................................................................31 ADVANCED ..............................................................................................................49 PORT FORWARDING............................................................49 APPLICATION RULES...........................................................50 QOS SETUP ..........................................................................51 Quality of Service Setup can be used to improve data flow for different applications by prioritizing the network traffic based on selected criteria......................................................................51 OUTBOUND FILTER..............................................................54 WIRELESS FILTER ...............................................................56 DNS SETUP...........................................................................57 FIREWALL & DMZ ................................................................ 59 ADVANCED INTERNET........................................................ 61 ADVANCED WIRELESS ....................................................... 63 ADVANCED LAN................................................................... 65 SNMP SETUP ....................................................................... 66 REMOTE MANAGEMENT..................................................... 67 ROUTING SETUP................................................................. 69 TR-069 .................................................................................. 70 WIFI PROTECTED SETUP................................................... 71 POWER MANAGEMENT ...................................................... 72 MAINTENANCE .......................................................................................................73 PASSWORD.......................................................................... 73 SAVE/RESTORE SETTINGS................................................ 74 FIRMWARE UPDATE............................................................ 75 SYSTEM LOG .......................................................................77 SCHEDULE................................................................................................................79 STATUS ......................................................................................................................80 DEVICE INFO........................................................................ 80 CONNECTED CLIENTS........................................................ 83 STATISTICS .......................................................................... 84 ROUTE INFO ........................................................................ 87 TROUBLESHOOTING ................................................................. 88 WIRELESS BASICS .................................................................... 90 NETWORKING BASICS .............................................................. 93 CHECK YOUR IP ADDRESS............................................................................................93 STATICALLY ASSIGN AN IP ADDRESS...........................................................................94 TECHNICAL SPECIFICATIONS .................................................. 95 FCC CAUTION............................................................................. 96 IC CAUTION................................................................................. 97
Table of Content D-Link DSL-2740B User Manual 3CONTACTING TECHNICAL SUPPORT.......................................98
Section 1 - Product Overview D-Link DSL-2740B User Manual 4Package Contents • DSL-2740B Wireless ADSL Router • 2 non-detachable Antennas(MIMO 2x2) • Power Adapter • CD-ROM with Installation Wizard, User Manual, and Special Offers • One twisted-pair telephone cable used for ADSL connection • One straight-through Ethernet cable • One Quick Installation Guide Note: Using a power supply with a different voltage rating than the one included with the DSL-2740B will cause damage and void the warranty for this product.
Section 1 - Product Overview D-Link DSL-2740B User Manual 5System Requirements 1. ADSL Internet service Computer with: • 200MHz Processor • 64MB Memory • CD-ROM Drive • Ethernet Adapter with TCP/IP Protocol Installed • Windows win7/vista/XP/2000 • MAC OS • Internet Explorer v6 or later, FireFox v1.5 2. D-Link Click's Connect Utility Computer with: • Windows win7/vista/XP/2000
Section 1 - Product Overview D-Link DSL-2740B User Manual 6 11 Introduction HIGH-SPEED ADSL2/2+ INTERNET CONNECTION Latest ADSL2/2+ standards provide Internet transmission of up to 24Mbps downstream, 1Mbps upstream. HIGH-PERFORMANCE WIRELESS Embedded 802.11n technology for high-speed wireless connection, complete compatibility with 802.11b/g wireless devices TOTAL SECURITY Firewall protection from Internet attacks, user access control, WPA/WPA2 wireless security. ULTIMATE INTERNET CONNECTION The DSL-2740B ADSL2+ router is a versatile, high-performance remote router for home and the small office. With integrated ADSL2/2+ supporting up to 24Mbps download speed, firewall protection, Quality of Service (QoS), 802.11n wireless LAN and 4 Ethernet switch ports, this router provides all the functions that a home or small office needs to establish a secure and high-speed remote link to the outside world. ULTIMATE WIRELESS CONNECTION WITH MAXIMUM SECURITY This router provides maximize wireless performance by connecting this router to computer interfaces and stay connected from virtually anywhere at home and in the office. The router can be used with 802.11b/g/n wireless networks to enable significantly improved reception. It supports WPA/WPA2 and WEP for flexible user access security and data encryption methods. FIREWALL PROTECTION & QoS Security features prevents unauthorized access to the home and office network, be it from the wireless devices or from the Internet. The router provides firewall security using Stateful Packet Inspection (SPI) and hacker attack logging for Denial of Service (DoS) attack protection. SPI inspects the contents of all incoming packet headers before deciding what packets are allowed to pass through. Router access control is provided with packet filtering based on port and source/destination MAC/IP addresses. For Quality of Service (QoS), the router supports multiple priority queues to enable a group of home or office users to experience the benefit of smooth network connection of inbound and outbound data without concern of traffic congestion. This QoS support allows users to enjoy high ADSL transmission for applications such as VoIP and streaming multimedia over the Internet. *Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
Section 1 - Product Overview D-Link DSL-2740B User Manual 7Features • Faster Wireless Networking - The DSL-2740B provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. • Compatible with 802.11b and 802.11g Devices - The DSL-2740B is still fully compatible with the IEEE 802.11b and g standards, so it can connect with existing 802.11b and g PCI, USB and Cardbus adapters. • DHCP Support - Dynamic Host Configuration Protocol automatically and dynamically assigns all LAN IP settings to each host on your network. This eliminates the need to reconfigure every host whenever changes in network topology occur. • Network Address Translation (NAT) - For small office environments, the DSL-2740B allows multiple users on the LAN to access the Internet concurrently through a single Internet account. This provides Internet access to everyone in the office for the price of a single user. NAT improves network security in effect by hiding the private network behind one global and visible IP address. NAT address mapping can also be used to link two IP domains via a LAN-to-LAN connection. • Precise ATM Traffic Shaping - Traffic shaping is a method of controlling the flow rate of ATM data cells. This function helps to establish the Quality of Service for ATM data transfer. • High Performance - Very high rates of data transfer are possible with the Router. Up to 24Mbps downstream bit rate using the G.dmt standard. (For ADSL2+) • Full Network Management - The DSL-2740B incorporates SNMP (Simple Network Management Protocol) support for web-based management and text-based network management via Telnet connection. • Easy Installation - The DSL-2740B uses a web-based graphical user interface program for convenient management access and easy set up. Any common web browser software can be used to manage the Router. *Maximum wireless signal rate derived from IEEE standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
Section 1 - Product Overview D-Link DSL-2740B User Manual 8 Hardware Overview Connections Power insert Use the adapter shipped with the Router to connect to power source Power button Push in to power-on the Router. Push again to power-off the Router Ethernet ports Use the Ethernet ports to connect the Router to your Ethernet LAN or Ethernet devices ADSL port Use the ADSL cable to connect to the your telephone line (RJ-11 port) Reset button To manually reset, depress button with the power on for between ten and fifteen seconds Wireless On/Off switch button Please press and hold on for 3 seconds to turn on/turn off.
Section 1 - Product Overview D-Link DSL-2740B User Manual 9Hardware Overview LEDs Power Steady green light indicates the unit is powered on. When the device is powered off this remains dark. WLAN Steady green light indicates a wireless connection. A blinking green light indicates activity on the WLAN DSL Steady green light indicates a valid ADSL connection. This will light after the ADSL negotiation process has been settled. A blinking green light indicates activity on the WAN (ADSL) interface. LAN A solid green light indicates a valid link on startup. These lights blink when there is activity currently passing through the Ethernet port. Internet Steady green light indicates a successful Internet connection. Steady red light indicates failed Internet connection. Dark if no WAN protocol is configured.
Section 2 - Installation D-Link DSL-2740B User Manual 10 Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please read and make sure you understand all the prerequisites for proper installation of your new Router. Have all the necessary information and equipment on hand before beginning the installation.
Section 2 - Installation D-Link DSL-2740B User Manual 11 Installation Notes In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some users, only their account information (Username and Password) is required. For others, various parameters that control and define the Internet connection will be required. You can print out the two pages below and use the tables to list this information. This way you have a hard copy of all the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary information can be easily accessed. Be sure to keep this information safe and private. Low Pass Filters Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each telephone that shares the line with the ADSL line. These filters are easy to install passive devices that connect to the ADSL device and/or telephone using standard telephone cable. Ask your service provider for more information about the use of low pass filters with your installation. Operating Systems The DSL-2740B uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP. Web Browser Any common web browser can be used to configure the Router using the web configuration management software. The program is designed to work best with more recently released browsers such as Opera, Microsoft Internet Explorer® version 6.0, Netscape Navigator® version 6.2.3, or later versions. The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not been disabled by other software (such as virus protection or web user security packages) that may be running on your computer. Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions that come with the Ethernet NIC adapter.
Section 2 - Installation D-Link DSL-2740B User Manual 12 802.11 Wireless LAN Configuration All the 802.11 wireless LAN settings may be configured on a single page using the web-based manager. For basic wireless communication you need to decide what channel to use and what SSID to assign. These two settings must be the same for any wireless workstations or other wireless access point that communicate with the DSL-2740B through the wireless interface. Security for wireless communication can be accomplished in a number of ways. The DSL-2740B supports WPA (Wi-Fi Protected Access), WPA2, and mixed WPA/WPA2. Wireless access can also be controlled by selecting MAC addresses that are allowed to associate with the device. Please read the section on Wireless Configuration. Additional Software It may be necessary to install software on your computer that enables the computer to access the Internet. Additional software must be installed if you are using the device a simple bridge. For a bridged connection, the information needed to make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself. If your ADSL service is delivered through a PPPoE or PPPoA connection, the information needed to establish and maintain the Internet connection can be stored in the Router. In this case, it is not necessary to install software on your computer. It may however be necessary to change some settings in the device, including account information used to identify and verify the connection. All connections to the Internet require a unique global IP address. For bridged connections, the global IP settings must reside in a TCP/IP enabled device on the LAN side of the bridge, such as a PC, a server, a gateway device such as a router or similar firewall hardware. The IP address can be assigned in a number of ways. Your network service provider will give you instructions about any additional connection software or NIC configuration that may be required.
Section 2 - Installation D-Link DSL-2740B User Manual 13 Information you will need from your ADSL service provider Username This is the Username used to log on to your ADSL service provider’s network. It is commonly in the form  user@isp.co.uk. Your ADSL service provider uses this to identify your account. Password This is the Password used, in conjunction with the Username above, to log on to your ADSL service provider’s network. This is used to verify the identity of your account. WAN Setting / Connection Type These settings describe the method your ADSL service provider uses to transport data between the Internet and your computer. Most users will use the default settings. You may need to specify one of the following WAN Setting and Connection Type configurations (Connection Type settings listed in parenthesis): • PPPoE/PPoA (PPPoE LLC, PPPoA LLC or PPPoA VC-Mux) • Bridge Mode (1483 Bridged IP LLC or 1483 Bridged IP VC Mux) • IPoA/MER (Static IP Address) (Bridged IP LLC, 1483 Bridged IP VC Mux, 1483 Routed IP LLC, 1483 Routed IP VC-Mux or IPoA) • MER (Dynamic IP Address) (1483 Bridged IP LLC or 1483 Bridged IP VC-Mux) Modulation Type ADSL uses various standardized modulation techniques to transmit data over the allotted signal frequencies. Some users may need to change the type of modulation used for their service. The default DSL modulation (ADSL2+ Multi-Mode) used for the Router automatically detects all types of ADSL, ADSL2, and ADSL2+ modulation. However, if you are instructed to specify the modulation type used for the Router, you may choose among the numerous options available on the Modulation Type drop-down menu on the ADSL Configuration window (Advanced > ADSL) Security Protocol This is the method your ADSL service provider will use to verify your Username and Password when you log on to their network. Your Router supports the PAP and CHAP protocols.
Section 2 - Installation D-Link DSL-2740B User Manual 14 VPI Most users will not be required to change this setting. The Virtual Path Identifier (VPI) is used in conjunction with the Virtual Channel Identifier (VCI) to identify the data path between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface. VCI Most users will not be required to change this setting. The Virtual Channel Identifier (VCI) used in conjunction with the VPI to identify the data path between your ADSL service provider’s network and your computer. If you are setting up the Router for multiple virtual connections, you will need to configure the VPI and VCI as instructed by your ADSL service provider for the additional connections. This setting can be changed in the WAN Settings window of the web management interface.
Section 2 - Installation D-Link DSL-2740B User Manual 15 Information you will need about DSL-2740B Username This is the Username needed access the Router’s management interface. When you attempt to connect to the device through a web browser you will be prompted to enter this Username. The default Username for the Router is “admin.” The user cannot change this. Password This is the Password you will be prompted to enter when you access the Router’s management interface. The default Password is “admin.” The user may change this. LAN IP addresses for the DSL-2740B This is the IP address you will enter into the Address field of your web browser to access the Router’s configuration graphical user interface (GUI) using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will be the base IP address used for DHCP service on the LAN when DHCP is enabled. LAN Subnet Mask for the DSL-2740B This is the subnet mask used by the DSL-2740B, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be changed later.
Section 2 - Installation D-Link DSL-2740B User Manual 16 Information you will need about your LAN or computer: Ethernet NIC If your computer has an Ethernet NIC, you can connect the DSL-2740B to this Ethernet port using an Ethernet cable. You can also use the Ethernet ports on the DSL-2740B to connect to other computer or Ethernet devices. DHCP Client status Your DSL-2740B ADSL Router is configured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and a default gateway address to computers on your LAN. The default range of IP addresses the DSL-2740B will assign are from 192.168.1.2 to 192.168.1.254. Your computer (or computers) needs to be configured to Obtain an IP address automatically (that is, they need to be configured as DHCP clients.) It is recommended that your collect and record this information here, or in some other secure place, in case you have to re-configure your ADSL connection in the future. Once you have the above information, you are ready to setup and configure your DSL-2740B Wireless ADSL Router.
Section 2 - Installation D-Link DSL-2740B User Manual 17 Wireless Installation Considerations DSL-2740B lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines: 1.1.1.1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2.2.2.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3.3.3.3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4.4.4.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5.5.5.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
Section 2 - Installation D-Link DSL-2740B User Manual 18 Device Installation The DSL-2740B Wireless ADSL Router maintains three separate interfaces, an Ethernet LAN, a wireless LAN and an ADSL Internet (WAN) connection. Carefully consider the Router’s location suitable for connectivity for your Ethernet and wireless devices. You must have a functioning broadband connection via a bridge device such as a Cable or ADSL modem in order to use the Router’s WAN function. Place the Router in a location where it can be connected to the various devices as well as to a power source. The Router should not be located where it will be exposed to moisture, direct sunlight or excessive heat. Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety procedures. The Router can be placed on a shelf, desktop, or other stable platform. If possible, you should be able to see the LED indicators on the front if you need to view them for troubleshooting. Power on Router The Router must be used with the power adapter included with the device. 1.1.1.1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. 2.2.2.2. Push down the Power button, and you should see the Power LED indicator light up and remain lit. 3.3.3.3. If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure the connection is valid. The Router will attempt to establish the ADSL connection, if the ADSL line is connected and the Router is properly configured this should light up after several seconds. If this is the first time installing the device, some settings may need to be changed before the Router can establish a connection.
Section 2 - Installation D-Link DSL-2740B User Manual 19 Factory Reset Button The Router may be reset to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence: 1.1.1.1. Press and hold the reset button while the device is powered off. 2.2.2.2. Turn on the power. 3.3.3.3. Wait for 10~15 seconds and then release the reset button. Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default management Username is “admin” and the default Password is “admin.” Network Connections Connect ADSL Line Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or given to you by your service provider. The ADSL connection represents the WAN interface, the connection to the Internet. It is the physical link to the service provider’s network backbone and ultimately to the Internet. Connect Router to Ethernet The Router may be connected to a single computer or Ethernet device through the 10BASE-TX Ethernet port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a speed of 10/100 Mbps only. When connecting the Router to any Ethernet device that is capable of operating at speeds higher than 10Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port. Use standard twisted-pair cable with RJ-45 connectors. The RJ-45 port on the Router is a crossed port (MDI-X). Follow standard Ethernet guidelines when deciding what type of cable to use to make this connection. When connecting the Router directly to a PC or server use a normal straight-through cable. You should use a crossed cable when connecting the Router to a normal (MDI-X) port on a switch or hub. Use a normal straight-through cable when connecting it to an uplink (MDI-II) port on a hub or switch. The rules governing Ethernet cable lengths apply to the LAN to Router connection. Be sure that the cable connecting the LAN to the Router does not exceed 100 meters.
Section 2 - Installation D-Link DSL-2740B User Manual 20 Hub or Switch to Router Connection Connect the Router to an uplink port (MDI-II) on an Ethernet hub or switch with a straight-through cable as shown in this diagram. If you wish to reserve the uplink port on the switch or hub for another device, connect to any on the other MDI-X ports (1x, 2x, etc.) with a crossed cable. Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram.
Section 3 - Configuration D-Link DSL-2740B User Manual 21 1. Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. 1-1 Web-based Configuration Utility Connect to the Router To configure the WAN connection used by the Router it is first necessary to communicate with the Router through its management interface, which is HTML-based and can be accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the Router. The next section describes how to change the IP configuration for a computer running a Windows operating system to be a DHCP client. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.1.1). Picture a -1
Section 3 - Configuration D-Link DSL-2740B User Manual 22 Type “admin” for the User Name and “admin” in the Password field. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. Picture a-2
Section 3 - Configuration D-Link DSL-2740B User Manual 23 SETUP This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the various windows used to configure and monitor the Router including how to change IP settings and DHCP server setup. WIZARD ADSL SETUP Click on the Setup Wizard button to launch the Setup Wizard. WELCOME TO D-LINK SETUP WIZARD There are four steps to configuring your router. Click on the Next button to continue.
Section 3 - Configuration D-Link DSL-2740B User Manual 24 STEP 1: CHANGE YOUR DSL-2740B PASSWORD The default password is "admin", in order to secure your network, please modify the password. Note: Confirm Password must be same as "New Password". Of course, you can click on the Skip to ignore the step. STEP 2: SELECT INTERNET CONNECTION TYPE Please select your Country and ISP Provider, VPI/VCI, Connection Type. If you can not find the country and ISP in the list below; you can select "Others", and then input the "VPI" and "VCI” and Connection Type. Please enter the VPI/VCI numbers if provided by the ISP. Click on the Next button to go to the next Setup Wizard window.
Section 3 - Configuration D-Link DSL-2740B User Manual 25 STEP 2: SELECT INTERNET CONNECTION TYPE Please Type IP Address, Subnet Mask and Default Gateway which are provided by your ISP. Select to Enable or Disable in the Obtain default gateway automatically option. If you choose Disable in the Obtain default gateway automatically option, please type Primary DNS Server and Secondary DNS Server which could also be provided by your ISP.
Section 3 - Configuration D-Link DSL-2740B User Manual 26 STEP 3: SET TIME AND DATE TIME SETTING: Please enable the Automatically synchronize with Internet time servers if you want to use time server. You can use the default time server web site or type any web server name you want on the First NTP time server and the Second NTP time server. Please select the time zone of your country on the Time Zone option. If you need to use the daylight saving, just choose the Enable Daylight Saving. Daylight saving is a period from late Spring to early Fall. Set how many hours to change the time for Daylight saving Offset. Configure Daylight Saving Dates, Daylight Saving time starts in the most parts of the United States on the second Sunday of March. Each time zone in the United States starts Daylight Saving time at 2 A.M. Thus, in the United States you must use March, Second, Sunday, at 2:00 A.M. Daylight Saving time starts in the European Union on the last Sunday of March. Thus, in European Union, you must select March, Last, Sunday. The time must depend on your country’s time zone. For example, In Germany you must type 2 because Germany’s time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. Daylight Saving time ends in the most parts of the United States on the First Sunday of November. Each time zone in the United States must use
Section 3 - Configuration D-Link DSL-2740B User Manual 27 Daylight Saving time at 2:00 A.M. Thus, in the United States you must set November, First, Sunday, at 2:00 A.M. Daylight Saving time ends in the European Union on the Last Sunday of October. For instance, in Germany you must type 2 because Germany’s time zone is 1 hour ahead of GMT (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. SET THE DATE AND TIME MANAULLY You can also use the Copy Your Computer’s Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration. STEP 4: CONNECT TO INTERNET Push the APPLYAPPLYAPPLYAPPLY button to use the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 28 INTERNET SETUP To access the INTERNET SETUP (WAN) settings window, click on the INTERNET Setup button in the SETUP directory and select the Manual Setup to configure the MANUAL ADSL interface in this page: INTERNET SETUP If you want to type connection configuration for various types, please enable the Manual Setup. MANUAL ADSL CONNECTION SETUP PPPoE/PPPoA PPPoE/PPPoA PPPoE/PPPoA PPPoE/PPPoA Choose this option if your ISP uses PPPoE/PPPoA.(For most DSL users’ DynaDynaDynaDynamic IP Addressmic IP Addressmic IP Addressmic IP Address Choose this option if your ISP uses Dynamic IP Address over DSL. Static IP AddressStatic IP AddressStatic IP AddressStatic IP Address Choose this option if your ISP uses Static IP assignments. BridgeBridgeBridgeBridge Choose this option if your ISP uses Bridge.
Section 3 - Configuration D-Link DSL-2740B User Manual 29 For PPPoE/PPPoA connection Type in the Username and Password (and PPPoE Service Name, if required by your ISP). Type service name which is from your ISP on the ServernameServernameServernameServername option. Choose PPPoE LLC/Snap-Bridging, PPPoE VC-mux, PPPoA LLC/encapsulation and PPPoA VC-mux. Set MTU value which you want but should be less than 1492 on the MTU Set the time which your data doesn’t pass through the connection, it will be disconnected on the Idle Time Out. The default time is 0 and it means it is always on. PPP IP Extension: Router passes the obtained IP address to the local PC and acts as a bridge only modem. Click on the Next button to go to the next window.
Section 3 - Configuration D-Link DSL-2740B User Manual 30 DNS AND DEFAULT GATEWAY Select Obtain DNS server address automatically to get DNS from your ISP. Or Select Use the following DNS server addresses to type the DNS IPs in the Preferred DNS server and Alternate DNS server. Set PVC values which are from your ISP on VPI/VCI Enable the Enable NAT when you want to have WAN and LAN. Enable the Enable Firewall when you want to have the basic filter function, for example, ICMP ping to DSL-2740B. Enable the Enable IGMP Proxy when you want to let IAD to play as a IGMP proxy which can help proxy server to send IGMP query packets to the IPTV clients. Enable VLAN and type the VLAN ID (0-4095) which your ISP assigns. Click on the Apply button.
Section 3 - Configuration D-Link DSL-2740B User Manual 31 WIRELESS Use this section to configure the wireless settings for your D-Link router. Please note that changes made in this section will also need to be duplicated onto your wireless clients and PC. To access the WIRELESS (WLAN) settings window, click on the Wireless Setup button in the SETUP directory. Wireless Network Setting Click on the Wireless Connection Setup Wizard button to setup the wireless connection in an easy way. It will use Web-based Wizard to assist you in connecting to your new D-Link Systems Wireless Router. Note:Before launching the wizard,please make sure you have followed all steps outlined in the Quick Installation Guide included in the package. Click on the Add Wireless Device with WPS button. This wizard is designed to assist you in connecting your wireless device to your router with WPS. It will guide you through step-by-step instructions on how to get your wireless device connected. If you would like to configure the Internet settings of you new D-Link Router manually,then click on the Manual Wireless Connection Setup button.
Section 3 - Configuration D-Link DSL-2740B User Manual 32 Welcome to the D-Link Wireless Security Setup Wizard Enable Your Wireless NetworkEnable Your Wireless NetworkEnable Your Wireless NetworkEnable Your Wireless Network Your wireless network is enabled by default. You can simply uncheck the below checkbox to disable wireless Network Name (SSID) identifies members of the Service Set. Accept the default name or change it to something else. If the default SSID is changed, all other devices on the wireless network must also use the same SSID. In order to protect your network from hackers and unauthorized users, we adapt Auto (WPA or WPA2’ for your wireless security mode. We provide user a random pre-shared key by automatically. You can also set it manually if you do not prefer the key we generate. Type a string (8-63 characters, such as a~z, A~Z, or 0~9.) on the PrePrePrePre----SharedSharedSharedShared key. Click Prev to go back to previous page. Click Next button to go to the next page. Click Cancel button to return to the main menu of Wireless Setup page.
Section 3 - Configuration D-Link DSL-2740B User Manual 33 Add Wireless Device with WPS The wizard shows the option to setup WPS by Auto or Manual. Auto -- Select this option if your wireless device supports WPS(Wi-Fi Protected Setup) Manual -- Select this option to display the current wireless settings for you to configure the wireless device manually. Click Next button to go to the next page. Click Cancel button to return to the main menu of Wireless Setup page. Add Wireless Device with WPS (Automatically) This page allows you to select PIN or PBC to use WPS method. PIN- Enter the PIN code from your wireless device and click the below Connect button to start the handshaking. PBC- Please press the Connect button and hold on for 3 seconds on your wireless device and presses the Connect button below within 120 seconds to start the handshaking. Click Prev to go back to previous page.
Section 3 - Configuration D-Link DSL-2740B User Manual 34 Add Wireless Device with WPS (WI-FI PROTECTED SETUP) WIZARD This page will count down the timer and please start WPS on the wireless device you are adding in time. Add Wireless Device with WPS (Manually) This screen shows the information for the SSID, Wireless Security Mode and the Network key and allow you to modify the current setting, if you select Auto in the previous page, you won’t see this page and please refer to next column. Please type network name on the Network Name SSID. Please type network key on the Network Key Click OK button to process the next page. Add Wireless Device with WPS (WI-FI PROTECTED SETUP) Finally it will show all the configurations. You can check if it is exact, please click the Next button.
Section 3 - Configuration D-Link DSL-2740B User Manual 35 Manual WIRELESS Connection Setup SETTINGS Click on the Enable Wireless box to allow the router to operate in the wireless environment. You can use the Add New button to set the schedule. The SSID identifies members of the Service Set. Accept the default name or change it to something else. If the default SSID is changed, all other devices on the wireless network must also use the same SSID. Enable Auto Channel Scan so that the router can select the best possible channel for your wireless network to operate on. The Wireless Channel can let you select the channel of your access point. Channel availability is different for different countries due to their regulation. Select 802.11 Mode to operate in b/g/n mode. Or select specified mode to use. 802.11b only, 802.11g only, 802.11n only. Mixed 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11g or 802.11b to synchronize. Mixed 802.11n, 802.11g and 802.11b which means DSL-2740B will detect the clients to use 802.11n, 802.11g or 802.11b to synchronize. Channel Width, Choose 20MHz or Auto 20/40MHz to decide the Transmission Rate. Transmission Rate, suggest keeping the Best (automatic) selection. This is related to Receive Sensitivity as follows, MANRATE HT20/GI=0 HT40/GI=0 HT40/GI=1 MCS 0 0x80 6.5Mbps 13.5Mbps X
Section 3 - Configuration D-Link DSL-2740B User Manual 36 MCS 1 0x81 13Mbps 27Mbps X MCS 2 0x82 19.5Mbps 40.5Mbps X MCS 3 0x83 26Mbps 54Mbps X MCS 4 0x84 39Mbps 81Mbps X MCS 5 0x85 52Mbps 108Mbps X MCS 6 0X86 58.5Mbps 121.5Mbps X MCS 7 0x87 65Mbps 135Mbps 150Mbps MCS 8 0x88 13Mbps 27Mbps X MCS 9 0x89 26Mbps 54Mbps X MCS 10 0x8a 39Mbps 81Mbps X MCS 11 0x8b 52Mbps 108Mbps X MCS 12 0x8c 78Mbps 162Mbps X MCS 13 0x8d 104Mbps 216Mbps X MCS 14 0x8e 117Mbps 243Mbps X MCS 15 0x8f 130Mbps 270Mbps 300Mbps If you only use the Transmission rate of the 20MHz, please refer to the right picture.
Section 3 - Configuration D-Link DSL-2740B User Manual 37 If you want to use the max. rate 150Mbps or the max. rate 300Mbps on 40MHz, please choose the Channel Width: Auto 20/40MHz Choose Visible or Invisible to decide if you want to show its SSID.
Section 3 - Configuration D-Link DSL-2740B User Manual 38 WIRELESS SECURITY Mode To protect your privacy you can configure wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPA-Enterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option requires an external RADIUS server.
Section 3 - Configuration D-Link DSL-2740B User Manual 39 WIRELESS SECURITY MODE - WEP WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy. WEP encrypts the data portion of each frame transmitted from the wireless adapter using one of the predefined keys. The router offers 64 or 128 bit encryption with four keys available. Select WEP Key Length from the drop-down menu. (128 bit is stronger than 64 bit) Specify the encryption key from the Current Network Key drop-down menu. Enter the key into the WEP Key field 1~4. (Key length is outlined at the bottom of the window.) Select Authentication type from the drop-down menu. (Shared is better than Open) Click on the Apply Settings button to apply settings.
Section 3 - Configuration D-Link DSL-2740B User Manual 40 WIRELESS SECURITY MODE – WPA-Personal Use WPA WPA WPA WPA or WPA2 WPA2 WPA2 WPA2 mode to achieve a balance of strong security and best compatibility. This mode uses WPA for legacy clients while maintaining higher security with stations that are WPA2 capable. Also the strongest cipher that the client supports will be used. For best security, use WPA2 OnlyWPA2 OnlyWPA2 OnlyWPA2 Only mode. This mode uses AES (CCMP’ cipher and legacy stations are not allowed access with WPA security. For maximum compatibility, use WPA OnlyWPA OnlyWPA OnlyWPA Only. This mode uses TKIP cipher. Some gaming and legacy devices work only in this mode. According to the WiFi Alliance 11N specification, Wi-Fi Protected Setup is not full supported under WPA Only mode. We will disable your Wi-Fi Protected Setup if you use WPA Only mode. Choose Auto(WPA or WPA2’Auto(WPA or WPA2’Auto(WPA or WPA2’Auto(WPA or WPA2’ / WPA2 onlyWPA2 onlyWPA2 onlyWPA2 only / WPA onlyWPA onlyWPA onlyWPA only on the WPA WPA WPA WPA ModeModeModeMode Type the value seconds on the Group Key Update IntervalGroup Key Update IntervalGroup Key Update IntervalGroup Key Update Interval. . . . The default value is 1800. Type the string on the PrePrePrePre----Shared KeyShared KeyShared KeyShared Key Click the Apply Settings button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 41 WIRELESS SECURITY MODE – WPA-Enterprise 802.1x Some network-security experts now recommend that wireless networks use 802.1X security measures to overcome some weaknesses in standard WEP applications. A RADIUS server is used to authenticate all potential users. . Enter your RADIUS server data: IP Address, Port, and Key. Click on the Save Settings button to apply settings.
Section 3 - Configuration D-Link DSL-2740B User Manual 42 LOCAL NETWORK You can configure the LAN IP address to suit your preference. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. The IP address of the Router is the base address used for DHCP. In order to use the Router for DHCP on your LAN, the IP address pool used for DHCP must be compatible with the IP address of the Router. The IP addresses available in the DHCP IP address pool will change automatically if you change the IP address of the Router. To access the Local Network setting window, click on the Local Network button in the SETUP directory. ROUTER SETTINGS To change the Router IP Address or Subnet Mask, type in the desired values. DHCP SERVER SETTINGS (OPTIONAL) The Enable DHCP Server is selected by default for the Router’s Ethernet LAN interface. Set the DHCP IP Address Range and the default is from 192.168.1.2 to 192.168.1.254. The IP address pool can be up to 253 IP addresses. Set the value hours on the DHCP Lease Time If you don’t want DSL-2740B to be the DHCP server, you can enable DHCP relay to pass the DHCP discover packets of the clients to another DHCP server. Please set the DHCP server IP address on the DHCP Server IP Address.
Section 3 - Configuration D-Link DSL-2740B User Manual 43 ADD/EDIT DHCP RESERVATION (OPTIONAL) Select the Enable to let you reserve the IP Address for the designated PC with the configured MAC Address. The Computer Name can help you recognize the PC with the MAC Address, such as “Father’s Laptop”. Clicking on the Copy Your PC’s MAC Address button to help you get the Mac address from the PC you are using now browsing this web page. Click on the Save button to save the settings DHCP RESERVATIONS LIST After saved the DHCP reservation, the DHCP RESERVATIONS LIST will list the configuration. The NUMBER OF DYNAMIC DHCP CLIENTS shows how many DHCP clients (PC or Laptop) connected to the router currently. Click on the Save Settings button. You will be asked to reboot by a pop-up window. Click on the OK to reboot the router.
Section 3 - Configuration D-Link DSL-2740B User Manual 44 LAN SETUP Do not turn the Router off while it is rebooting. You might need to re-configure your PC NIC settings to enter the Router’s web manager after reboot.
Section 3 - Configuration D-Link DSL-2740B User Manual 45 TIME The TIME configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically adjust the time when needed. To access the TIME setting window, click on the Time and Date button in the SETUP directory TIME Check the Enable NTP Server. Select specific time server to use from the NTP Server Used drop-down menu. Or, you can type the specific NTP server name. Select your operating time zone from the Time Zone drop-down menu. If you need to use the daylight saving, just choose the Enable Daylight Saving. Daylight saving is a period from late Spring to early Fall. Set how many hours to change the time for Daylight saving Offset. Configure Daylight Saving Dates, Daylight Saving time starts in the most parts of the United States on the second Sunday of March. Each time zone in the United States starts Daylight Saving time at 2 A.M. Thus, in the United States you must use March, Second, Sunday, at 2:00 A.M. Daylight Saving time starts in the European Union on the last Sunday of March. Thus, in European Union, you must select March, Last, Sunday. The time must depend on your country’s time zone. For
Section 3 - Configuration D-Link DSL-2740B User Manual 46 example, In Germany you must type 2 because Germany’s time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. Daylight Saving time ends in the most parts of the United States on the First Sunday of November. Each time zone in the United States must use Daylight Saving time at 2:00 A.M. Thus, in the United States you must set November, First, Sunday, at 2:00 A.M. Daylight Saving time ends in the European Union on the Last Sunday of October. For instance, in Germany you must type 2 because Germany’s time zone is 1 hour ahead of GMT (GMT+1). Thus, in Germany you must use March, Last, Sunday, at 1:00 A.M. SET THE DATE AND TIME MANAULLY You can also use the Copy Your Computer’s Time Settings to synchronize the Date and Time to your local PC. Or, you also can adjust Year/Month/Day/Hour/Minute/Second manually. Please click the Apply button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 47 PARENTAL CONTROL Parental Control provides two useful tools for restricting Internet access. Block Websites allows you to quickly create a list of all web sites that you wish to stop users from accessing. Time Restrictions allows you to control when clients or PCs connected to Router are allowed to access the Internet BLOCKED WEBSITES SCHBLOCKED WEBSITES SCHBLOCKED WEBSITES SCHBLOCKED WEBSITES SCHEDULING EDULING EDULING EDULING Please type the website name which you want to block on the WebsiteWebsiteWebsiteWebsite Please set the day and time. After finish, please click on the Block Block Block Block WebsiteWebsiteWebsiteWebsite button and then it will show in list. INTERNET ACCESS TIMEINTERNET ACCESS TIMEINTERNET ACCESS TIMEINTERNET ACCESS TIME RESTRICTIONS RESTRICTIONS RESTRICTIONS RESTRICTIONS You can have the schedule plan to decide the internet access time restrictions.
Section 3 - Configuration D-Link DSL-2740B User Manual 48 LOGOUT The LOGOUT page enables you to logout of your router configuration and closes the browser. To access the LOGOUT setting window, click on the Logout button in the SETUP directory LOGOUT Click on the Logout button to logout of the router configuration settings and close the browser.
Section 3 - Configuration D-Link DSL-2740B User Manual 49 ADVANCED This chapter includes the more advanced features used for network management and security as well as administrative tools to manage the router, view status and other information used to examine performance and for troubleshooting. PORT FORWARDING Use the PORT FORWARDING window to open ports in your router and re-direct data through those ports to a single PC on your network (WAN-to-LAN traffic). The Port Forwarding function allows remote users to access services on your LAN such as FTP for file transfers or SMTP and POP3 for e-mail. The DSL-2740B will accept remote requests for these services at your Global IP Address, using the specified TCP or UDP protocol and port number, and then redirect these requests to the server on your LAN with the LAN IP address you specify. Remember that the specified Private IP Address must be within the useable range of the subnet occupied by the Router. To access the PORT FORWARDING settings window, click on the PORT FORWARDING button in the ADVANCED directory PORT FORWARDING RULES CONFIGURATION Select a name from the Application Name drop-down menu for a pre-configured application or type a name in the Name input box to define your own application. Select a name from the Computer Name drop-down menu or type an IP address in the IP address input box to appoint the PC to receive the forwarded packets. The External Port shows the ports opened for remote users in the WAN side of the router. The TCP/UDP means the protocol type of the opened ports. The Internal Port shows the ports opened in the PC with the appointed IP Address. The TCP/UDP means the protocol type of the opened ports.
Section 3 - Configuration D-Link DSL-2740B User Manual 50 APPLICATION RULES This option is used to pre-configure single or multiple trigger ports on your router that will automatically activate when the router senses data sent to the Internet from one of these applications. APPLICATION RULES COAPPLICATION RULES COAPPLICATION RULES COAPPLICATION RULES CONFIGURATIONNFIGURATIONNFIGURATIONNFIGURATION Select a name from the Application Name drop-down menu for a pre-configured application or type a name in the Name input box to define your own application. It will appear the Trigger and Firewall ports after you choose the application name by the drop-down menu. Choose the Use Interface and click the Add/ApplyAdd/ApplyAdd/ApplyAdd/Apply button to save the configuration, and then it will be added in the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 51 QOS SETUP Quality of Service Setup can be used to improve data flow for different applications by prioritizing the network traffic based on selected criteria. QOS SETUP QOS SETUP QOS SETUP QOS SETUP You have to define the service ports. For example, VoIP(RTP) is from 700(Start Port) to 900(End Port) H.323 H.323 H.323 H.323 is 1720 FTP FTP FTP FTP is from 20(Start Port) to 21(End Port) MSN massager is from 1863(Start Port) to 1864(End Port) WIRELESS QOS SETUPWIRELESS QOS SETUPWIRELESS QOS SETUPWIRELESS QOS SETUP You can choose EnableEnableEnableEnable or DisableDisableDisableDisable to decide if the data has the WMM on the WMM(WiWMM(WiWMM(WiWMM(Wi----Fi Multimedia’Fi Multimedia’Fi Multimedia’Fi Multimedia’ WMWMWMWMM No Acknowledge M No Acknowledge M No Acknowledge M No Acknowledge means that the receiver doesnt have to send back the Acknowledge packet.
Section 3 - Configuration D-Link DSL-2740B User Manual 52 ADVANCED QOS SETUP ADVANCED QOS SETUP ADVANCED QOS SETUP ADVANCED QOS SETUP Click the Wireless QoSWireless QoSWireless QoSWireless QoS button to set wireless data priority. Click the LAN QoS button to set Ethernet data priority. WIRELESS QOS RULEWIRELESS QOS RULEWIRELESS QOS RULEWIRELESS QOS RULES CONFIS CONFIS CONFIS CONFIGURATIGURATIGURATIGURATIONONONON Type the policy name on the NameNameNameName Set the priority value on the PriorityPriorityPriorityPriority Select the ProtocolProtocolProtocolProtocol, ANY, ICMP, TCP and UDP. Set the Source IP Range Source IP Range Source IP Range Source IP Range and the Destination IP RangeDestination IP RangeDestination IP RangeDestination IP Range. Set the Source Port Range Source Port Range Source Port Range Source Port Range and the Destination Port RangeDestination Port RangeDestination Port RangeDestination Port Range. Click the Add/ApplyAdd/ApplyAdd/ApplyAdd/Apply button to add the policy to the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 53 LANLANLANLAN QOS RULES CONFI QOS RULES CONFI QOS RULES CONFI QOS RULES CONFIGURATIGURATIGURATIGURATIONONONON Type the policy name on the NameNameNameName Set the priority value on the PriorityPriorityPriorityPriority Select the ProtocolProtocolProtocolProtocol, ANY, ICMP, TCP and UDP. Set the Source IP Range Source IP Range Source IP Range Source IP Range and the Destination IP RaDestination IP RaDestination IP RaDestination IP Rangengengenge. Set the Source Port Range Source Port Range Source Port Range Source Port Range and the Destination Port RangeDestination Port RangeDestination Port RangeDestination Port Range. Click the Add/ApplyAdd/ApplyAdd/ApplyAdd/Apply button to add the policy to the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 54 OUTBOUND FILTER By default, all outgoing IP traffic from the LAN is allowed. The Outbound Filter allows you to create a filter rule to block outgoing IP traffic by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. AAAADD OUTBOUND IP FILTERDD OUTBOUND IP FILTERDD OUTBOUND IP FILTERDD OUTBOUND IP FILTER Type the filter name on the Filter NameFilter NameFilter NameFilter Name. Choose ICMP, TCP/UDP, TCP or UDP on the ProtocolProtocolProtocolProtocol. Type Source IP addressSource IP addressSource IP addressSource IP address, Source Subnet Mask Source Subnet Mask Source Subnet Mask Source Subnet Mask and Source PortSource PortSource PortSource Port(port or (port or (port or (port or port:port:port:port:::::portportportport means from which port to which port’ ’ ’ ’ Type DestinationDestinationDestinationDestination IP address IP address IP address IP address, DestinationDestinationDestinationDestination Subnet Subnet Subnet Subnet Mask Mask Mask Mask and DestinationDestinationDestinationDestination Port(po Port(po Port(po Port(port or rt or rt or rt or port:port:port:port:::::portportportport means from which port to which port’’’’ Set the policy schedule on the Schedule, Always or never, or View Available SchedulesView Available SchedulesView Available SchedulesView Available Schedules Please click Add/ApplyAdd/ApplyAdd/ApplyAdd/Apply button to add the policy in the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 55 IIIINBOUND NBOUND NBOUND NBOUND FILTERFILTERFILTERFILTER By default, all incoming IP traffic from the internet network is allowed. The Inbound Filter allows you to create a filter rule to filter incoming IP traffic by specifying a filter name and at least one condition below. All of the specified conditions in this filter rule must be satisfied for the rule to take effect. AAAADD OUTBOUND IP FILTERDD OUTBOUND IP FILTERDD OUTBOUND IP FILTERDD OUTBOUND IP FILTER Type the filter name on the Filter NameFilter NameFilter NameFilter Name. Choose ICMP, TCP/UDP, TCP or UDP on the ProtocolProtocolProtocolProtocol. Type Source IP addressSource IP addressSource IP addressSource IP address, Source Subnet Mask Source Subnet Mask Source Subnet Mask Source Subnet Mask and Source Port(port Source Port(port Source Port(port Source Port(port or or or or port:port:port:port:::::portportportport means from which port to which port’ ’ ’ ’ Type DestinationDestinationDestinationDestination IP address IP address IP address IP address, DestinationDestinationDestinationDestination Subnet Mask Subnet Mask Subnet Mask Subnet Mask and DestinationDestinationDestinationDestination Port(port or Port(port or Port(port or Port(port or port:port:port:port:::::portportportport means from which port to which port’’’’ Set the policy schedule on the Schedule, Always or never, or View View View View AvailabAvailabAvailabAvailable Schedulesle Schedulesle Schedulesle Schedules Please click Add/ApplyAdd/ApplyAdd/ApplyAdd/Apply button to add the policy in the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 56 WIRELESS FILTER This feature can let you add a policy to deny or allow WLAN devices connected to the router WIRELESS FILTER POLICYWIRELESS FILTER POLICYWIRELESS FILTER POLICYWIRELESS FILTER POLICY You can choose the Disable/ Allow All/ Deny All of Wireless Filter Wireless Filter Wireless Filter Wireless Filter Policy. Policy. Policy. Policy. Disable: You dont want to launch the feature. Allow All: Support Wlan devices make connection, except the mac address which is added in the filter table. Deny All: Support deny all Wlan devices make connection, except the mac address which is added in the filter table. WIRELESS FILTERWIRELESS FILTERWIRELESS FILTERWIRELESS FILTER Type filter name on the FILTER NAMEFILTER NAMEFILTER NAMEFILTER NAME Type wireless mac address on the Wireless MAC AddressWireless MAC AddressWireless MAC AddressWireless MAC Address WIRELESS FWIRELESS FWIRELESS FWIRELESS FILTER ILTER ILTER ILTER ---- MAXIMUM 32 ENTRIES MAXIMUM 32 ENTRIES MAXIMUM 32 ENTRIES MAXIMUM 32 ENTRIES CANCANCANCAN BE BE BE BE ADDED.ADDED.ADDED.ADDED. Please click the Add/Apply button to add the policy in the list.
Section 3 - Configuration D-Link DSL-2740B User Manual 57 DNS SETUP The DNS is used to resolve the DNS name to IPs. You can type or get automatically. The Dynamic DNS feature allows you to host a server (Web, FTP, Game Server, etc...’ using a domain name that you have purchased (for example: www.whateveryournameis.com’ with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing’ IP addresses. Using a DDNS service provider, your friends can enter your host name to connect to your game server and your friends dont mind what your IP address is, and then just type the DDNS name to reach. You can use the D_Link DDNS server, https://www.dlinkddns.com to have a free DDNS. To access the DNS setting window, click on the DNS button under the ADVANCED tab. DNS SERVER CONFIGURATION If you are using the Router for DHCP service on the LAN and are using DNS servers on the ISP’s network, check Obtain DNS server address automatically box. If you have DNS IP addresses provided by your ISP, enter these IP addresses in the available entry fields for the Primary DNS Server and the Secondary DNS Server.
Section 3 - Configuration D-Link DSL-2740B User Manual 58 To access the DDNS setting window, click on the DDNS button under the ADVANCED tab. DDNS CONFIGURATION Please enable the Enable Dynamic DNS if you want to use DDNS. Choose which DDNS web site to use on the Server Address. Type which Host name which you registered with your DDNS service provider. on the Host Name. Please choose which interface name to use on the Interface. Type the username/password on the username/password for your DDNS account. After configure the DNS settings as desired, click on the Apply button to apply settings.
Section 3 - Configuration D-Link DSL-2740B User Manual 59 FIREWALL & DMZ The router already provides a simple firewall by virtue of the way NAT works. By default NAT does not respond to unsolicited incoming requests on any port, thereby making your WAN invisible to Internet cyber attackers. DMZ means 'Demilitarised Zone'. DMZ allows computers behind the router firewall to be accessible to Internet traffic. Typically, your DMZ would contain Web servers, FTP servers, and others. FIREWALL FIREWALL FIREWALL FIREWALL SETTINGSETTINGSETTINGSETTING Enable the SPI on the Enable SPIEnable SPIEnable SPIEnable SPI Enable the DOS and Portscan on the Enable DOS and Portscan Enable DOS and Portscan Enable DOS and Portscan Enable DOS and Portscan ProtectionProtectionProtectionProtection Choose the SYN attackSYN attackSYN attackSYN attack, FIN/URG/PSH attackFIN/URG/PSH attackFIN/URG/PSH attackFIN/URG/PSH attack, Ping attackPing attackPing attackPing attack, Xmas Xmas Xmas Xmas Tree attackTree attackTree attackTree attack, TCP rTCP rTCP rTCP reset attackeset attackeset attackeset attack, Null scanning attackNull scanning attackNull scanning attackNull scanning attack, Ping of Ping of Ping of Ping of Death attackDeath attackDeath attackDeath attack and SYN/RST SYN/FIN attackSYN/RST SYN/FIN attackSYN/RST SYN/FIN attackSYN/RST SYN/FIN attack.
Section 3 - Configuration D-Link DSL-2740B User Manual 60 DMZ SETTINGDMZ SETTINGDMZ SETTINGDMZ SETTING Please enable the Enable DMZEnable DMZEnable DMZEnable DMZ and type the DMZ client IP on the DMZ IP AddressDMZ IP AddressDMZ IP AddressDMZ IP Address. Or you also can choose the DMZ host by the up-down menu. APPLICATIOAPPLICATIOAPPLICATIOAPPLICATION LEVEL GATEWAY (ALGN LEVEL GATEWAY (ALGN LEVEL GATEWAY (ALGN LEVEL GATEWAY (ALG’ ’ ’ ’ CONFIGURATIONCONFIGURATIONCONFIGURATIONCONFIGURATION Please choose the PPTPPPTPPPTPPPTP, IPSec(VPN Passthrough’ IPSec(VPN Passthrough’ IPSec(VPN Passthrough’ IPSec(VPN Passthrough’, RTSP(Online Video Streaming’RTSP(Online Video Streaming’RTSP(Online Video Streaming’RTSP(Online Video Streaming’, Windows/MSN MessagerWindows/MSN MessagerWindows/MSN MessagerWindows/MSN Messager, FTPFTPFTPFTP, H.323(Video Conferencing’H.323(Video Conferencing’H.323(Video Conferencing’H.323(Video Conferencing’, SIPSIPSIPSIP, WakeWakeWakeWake----OnOnOnOn----LANLANLANLAN and MMSMMSMMSMMS.
Section 3 - Configuration D-Link DSL-2740B User Manual 61 ADVANCED INTERNET The Multiple PVC Settings allow you to AddAddAddAdd, DeleteDeleteDeleteDelete or EditEditEditEdit multiple PVCs connection for advanced ADSL service. The Advanced ADSL settings allow you to choose which ADSL modulation settings your modem router will support. D-Link do not recommend that you change these settings unless directed to do so by your ISP. MULTIPLE PVC SETTINGMULTIPLE PVC SETTINGMULTIPLE PVC SETTINGMULTIPLE PVC SETTINGSSSS Please click the AddAddAddAdd button to add the multiple PVC
Section 3 - Configuration D-Link DSL-2740B User Manual 62 ADVANCED ADSL SETTINADVANCED ADSL SETTINADVANCED ADSL SETTINADVANCED ADSL SETTINGSGSGSGS Please select following ADSL profile to link. G.DmtG.DmtG.DmtG.Dmt, G.liteG.liteG.liteG.lite, T1.413T1.413T1.413T1.413, ADSL2ADSL2ADSL2ADSL2, AnnexL AnnexL AnnexL AnnexL, ADSL2+ADSL2+ADSL2+ADSL2+, Annex MAnnex MAnnex MAnnex M Please choose the Inner pairInner pairInner pairInner pair or Outer pairOuter pairOuter pairOuter pair on the Select the Select the Select the Select the phone line pair belowphone line pair belowphone line pair belowphone line pair below. Please select to enable Bitswap and SRA on the Capability.
Section 3 - Configuration D-Link DSL-2740B User Manual 63 ADVANCED WIRELESS These options are for users that wish to change the behavior of their 802.11g wireless radio from the standard setting. D-Link does not recommend changing these settings from the factory default. Incorrect settings may impair the performance of your wireless radio. The default settings should provide the best wireless radio performance in most environments. ADVANCED ADVANCED ADVANCED ADVANCED WIRELESSWIRELESSWIRELESSWIRELESS SETTINGS SETTINGS SETTINGS SETTINGS If you need to change the default behavior, Please type the value on the Fragmentation ThresholdFragmentation ThresholdFragmentation ThresholdFragmentation Threshold Please type the value on the RTS Threshold RTS Threshold RTS Threshold RTS Threshold Please type the value on the DTIM Interval DTIM Interval DTIM Interval DTIM Interval Please type the value on the Beacom IntervBeacom IntervBeacom IntervBeacom Intervalalalal Please choose 20%, 40%, 60%, 80% and 100% on the Transmit Transmit Transmit Transmit PowerPowerPowerPower. GUEST WIRELESS SETTINGGUEST WIRELESS SETTINGGUEST WIRELESS SETTINGGUEST WIRELESS SETTING
Section 3 - Configuration D-Link DSL-2740B User Manual 64 Please enable the Enable Wireless Guest NetworkEnable Wireless Guest NetworkEnable Wireless Guest NetworkEnable Wireless Guest Network Type SSID on the Wireless Network Name Wireless Network Name Wireless Network Name Wireless Network Name Please choose VisibleVisibleVisibleVisible or InvisibleInvisibleInvisibleInvisible on the Visibility StatusVisibility StatusVisibility StatusVisibility Status Please select OOOOff/Onff/Onff/Onff/On on the AP Isolation.
Section 3 - Configuration D-Link DSL-2740B User Manual 65 ADVANCED LAN These options are for users that wish to change the LAN settings. D-Link does not recommend changing these settings from factory default. Changing these settings may affect the behavior of your network. UPNPUPNPUPNPUPNP Please select the Enable UPnP when you want to have Universal Plug and Play (UPnP’ supports peer-to-peer Plug and Play functionality for network devices. BLOCK ICMP PINGBLOCK ICMP PINGBLOCK ICMP PINGBLOCK ICMP PING Enable the WAN Ping Respond on the Enable WAN Ping Enable WAN Ping Enable WAN Ping Enable WAN Ping RespondRespondRespondRespond.... Please select Allow AllAllow AllAllow AllAllow All or Deny AllDeny AllDeny AllDeny All on the WAN Ping Inbound WAN Ping Inbound WAN Ping Inbound WAN Ping Inbound FilterFilterFilterFilter and you can also type a string on the Details Details Details Details to describe the action. MULTICAST STREAMSMULTICAST STREAMSMULTICAST STREAMSMULTICAST STREAMS Please enable the Enable Multicast Streams (IGMP’Enable Multicast Streams (IGMP’Enable Multicast Streams (IGMP’Enable Multicast Streams (IGMP’ to let IGMP stream can pass through DSL-2740B.
Section 3 - Configuration D-Link DSL-2740B User Manual 66 SNMP SETUP Simple Network Management Protocol (SNMP’ allows a management application to retrieve statistics and status from the SNMP agent in this device. Select the desired values and click "Apply" to configure the SNMP options. SNMP CONFIGURATIONSNMP CONFIGURATIONSNMP CONFIGURATIONSNMP CONFIGURATION Please enable the SNMP AgenSNMP AgenSNMP AgenSNMP Agentttt Please type the Read Community Read Community Read Community Read Community, Set CommunitySet CommunitySet CommunitySet Community to match to the SNMP requirier. Please type System NameSystem NameSystem NameSystem Name, System LocationSystem LocationSystem LocationSystem Location and System System System System ContactContactContactContact to describe the DSL-2740Bs related information. Please type the trap IP on the Trap Manager IPTrap Manager IPTrap Manager IPTrap Manager IP Please click the ApplyApplyApplyApply button to save the configurations.
Section 3 - Configuration D-Link DSL-2740B User Manual 67 REMOTE MANAGEMENT This section allows you to enable/disable remote access to the router from the Internet. Advanced access control allows you to configure access via specific services. Most users will not need to change any of these settings. REMOTE MANAGEMENT SEREMOTE MANAGEMENT SEREMOTE MANAGEMENT SEREMOTE MANAGEMENT SETTINGSTTINGSTTINGSTTINGS Please enable the ENABLE Remote Management ENABLE Remote Management ENABLE Remote Management ENABLE Remote Management Please type the port number which you want to replace the original port. Please select Allow AllAllow AllAllow AllAllow All or Deny All Deny All Deny All Deny All on the Remote Admin Remote Admin Remote Admin Remote Admin Inbound FiltInbound FiltInbound FiltInbound Filterererer Please type a string to describe the action on the DetailsDetailsDetailsDetails.
Section 3 - Configuration D-Link DSL-2740B User Manual 68 REMOTE ACCESS CONTROREMOTE ACCESS CONTROREMOTE ACCESS CONTROREMOTE ACCESS CONTROLLLL Please select the ServiceServiceServiceService to enable on LANLANLANLAN or WANWANWANWAN. Please click the Apply Settings Apply Settings Apply Settings Apply Settings button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 69 ROUTING SETUP Enter the destination network address, subnet mask, gateway AND/OR available WAN interface then click "Apply" to add the entry to the routing table. A maximum 32 entries can be configuredA maximum 32 entries can be configuredA maximum 32 entries can be configuredA maximum 32 entries can be configured Allows you to configure RIP (Routing Information Protocol’. To activate RIP for the device, select the 'Enabled' radio button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the 'Enabled' checkbox for the interface. Click the 'Apply' button to save the configuration, and to start or stop RIP based on the Global RIP mode selected. ROUTING ROUTING ROUTING ROUTING -------- STATIC ROUTE STATIC ROUTE STATIC ROUTE STATIC ROUTE Please click the AddAddAddAdd or EditEditEditEdit button to set a static routing policy in the list. Please type the Destination Network AddressDestination Network AddressDestination Network AddressDestination Network Address and SubnetSubnetSubnetSubnet MaskMaskMaskMask.... Please select to type the Gateway IPGateway IPGateway IPGateway IP or the interfaceinterfaceinterfaceinterface to be the routing interface. Click the Apply the button to save the configuration. ROUTING ROUTING ROUTING ROUTING -------- RIP CONFIGURATION RIP CONFIGURATION RIP CONFIGURATION RIP CONFIGURATION Please choose the VersionVersionVersionVersion and OperationOperationOperationOperation, and then decide to EnableEnableEnableEnable or not.
Section 3 - Configuration D-Link DSL-2740B User Manual 70 TR-069 The WAN management protocol TR-069 allows anAuto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device. To access the TR-069 Configuration window, click on the TR-069 button under the ADVANCED tab. TR-069 TR-069 is a WAN management protocol which allows your ISP to perform monitoring, configuration and firmware upgrade on your router remotely. Inform: Select to enable or disable TR-069 client functionality. Inform Interval: Interval (seconds) between two Inform messages. ACS URL: Enter the URL of your ISP’s ACS ACS User Name: Enter the authentication user name ACS Password: Enter the authentication password Connection Request User Name: Enter the authentication user name for the ACS to login Connection Request Password: Enter the authentication password for the ACS to login
Section 3 - Configuration D-Link DSL-2740B User Manual 71 WIFI PROTECTED SETUP Wi-Fi Protected Setup is used to easily add devices to a network using a PIN or button press. Devices must support Wi-Fi Protected Setup in order to be configured by this method. WIWIWIWI----FI PROTECTED SETUFI PROTECTED SETUFI PROTECTED SETUFI PROTECTED SETUPPPP Please select to EnableEnableEnableEnable or Lock Wireless Security Settings Lock Wireless Security Settings Lock Wireless Security Settings Lock Wireless Security Settings You also can click the Set to ConfiguredSet to ConfiguredSet to ConfiguredSet to Configured button to set configured PIN SETTINGSPIN SETTINGSPIN SETTINGSPIN SETTINGS Choose to click the Reset Reset Reset Reset PIN to DefaultPIN to DefaultPIN to DefaultPIN to Default button or Generate New Generate New Generate New Generate New PIN PIN PIN PIN button to show the PIN on the Current PINCurrent PINCurrent PINCurrent PIN. ADD WIRELESS STATION ADD WIRELESS STATION ADD WIRELESS STATION ADD WIRELESS STATION Please click the Add Wireless DeviceAdd Wireless DeviceAdd Wireless DeviceAdd Wireless Device with WPS button to set the WPS.
Section 3 - Configuration D-Link DSL-2740B User Manual 72 POWER MANAGEMENT This feature allows you to control of Hardware modules to evaluate power consumption. Use the control buttons to select the desired option, click Apply and check the status response. MIPS CPU CLOCKMIPS CPU CLOCKMIPS CPU CLOCKMIPS CPU CLOCK You can choose AutoAutoAutoAuto, 1/8 of full speed ASYNC1/8 of full speed ASYNC1/8 of full speed ASYNC1/8 of full speed ASYNC, 1/4 of full speed 1/4 of full speed 1/4 of full speed 1/4 of full speed ASYNCASYNCASYNCASYNC, 1/2 of full speed ASYNC1/2 of full speed ASYNC1/2 of full speed ASYNC1/2 of full speed ASYNC,,,, Full speed ASYNFull speed ASYNFull speed ASYNFull speed ASYNCCCC, Full Full Full Full speed SYNCspeed SYNCspeed SYNCspeed SYNC and it will show on the StatusStatusStatusStatus. It can control the CPUs handling data speed. WAIT INSTRUCTION WHEWAIT INSTRUCTION WHEWAIT INSTRUCTION WHEWAIT INSTRUCTION WHEN IDLEN IDLEN IDLEN IDLE The CPU can wait for the coming data to handle or idle. Please EEEEnablenablenablenable the feature if necessary. DRAM SELF REFRESHDRAM SELF REFRESHDRAM SELF REFRESHDRAM SELF REFRESH DRAM can clear any non-processing tasks automatically. Please EEEEnablenablenablenable the feature if necessary. Please click the ApplyApplyApplyApply button to save the settings.
Section 3 - Configuration D-Link DSL-2740B User Manual 73 MAINTENANCE Click on the MAINTENANCE tab to reveal the window buttons for various functions located in this directory. PASSWORD The factory default password of this router is 'admin'. To help secure your network, D-Link recommends that you should choose a new password. SET PASSWORD (OPTIONSET PASSWORD (OPTIONSET PASSWORD (OPTIONSET PASSWORD (OPTIONAL’AL’AL’AL’ Please type the Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password Current Password, New Password, Confirm Password and the Idle Time Out.the Idle Time Out.the Idle Time Out.the Idle Time Out. Please click the Apply Settings button to save the settings. GRAPHIC LOGGRAPHIC LOGGRAPHIC LOGGRAPHIC LOG----IN AUTHENTICATION (CIN AUTHENTICATION (CIN AUTHENTICATION (CIN AUTHENTICATION (CAPTCHA’APTCHA’APTCHA’APTCHA’ To enhance your router login security, you can enable CAPTCHA. Please click the Apply Settings button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 74 SAVE/RESTORE SETTINGS Once the router is configured and you can save the configuration settings to a configuration file on your hard drive. You also have the option to load configuration settings, or restore the factory default settings. SAVE/RESTORE CONFIGSAVE/RESTORE CONFIGSAVE/RESTORE CONFIGSAVE/RESTORE CONFIGURATIONURATIONURATIONURATION Please click the SaveSaveSaveSave button on the Save Settings to Local Hard Save Settings to Local Hard Save Settings to Local Hard Save Settings to Local Hard DriveDriveDriveDrive. Please click BrowseBrowseBrowseBrowse button to choose the configurations file and then click the Update SettingsUpdate SettingsUpdate SettingsUpdate Settings button to upload. If necessary, please click the Restore DeviceRestore DeviceRestore DeviceRestore Device button to have the default settings.
Section 3 - Configuration D-Link DSL-2740B User Manual 75 FIRMWARE UPDATE Use the FIRMWARE UPGRADE window to load the latest firmware for the device. Note that the device configuration settings may return to the factory default settings, so make sure you first save the configuration settings with the SAVE/RESTORE SETTINGS window described above. To access the FIRMWARE UPGRADE setting window, click on the Firmware Update button under the MAINTENANCE tab. FIRMWARE INFORMATION It shows Board ID, Software Version, Bootloader(CEF) Version and Wireless Driver Version FIRMWARE UPGRADE To upgrade firmware, click on the Browse… button to search for the firmware file and then click the Upload button to begin copying the file. The Router will load the file and restart automatically.
Section 3 - Configuration D-Link DSL-2740B User Manual 76 DIAGNOSTICSDIAGNOSTICSDIAGNOSTICSDIAGNOSTICS Your router is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click "Return Diagnostics Tests" at the bottom of this page to make sure fail status is consistent. If the test continues to fail, click "Help" and follow the troubleshooting procedures. . SYSTEM CHECKSYSTEM CHECKSYSTEM CHECKSYSTEM CHECK There are Test your eth0/eth1/eth2/eth3 ConnectionTest your eth0/eth1/eth2/eth3 ConnectionTest your eth0/eth1/eth2/eth3 ConnectionTest your eth0/eth1/eth2/eth3 Connection, Test yourTest yourTest yourTest your Wireless Connection Wireless Connection Wireless Connection Wireless Connection and Test ADSL SynchronizationTest ADSL SynchronizationTest ADSL SynchronizationTest ADSL Synchronization and they will show PASSPASSPASSPASS or FAILFAILFAILFAIL INTERNET CONNECTIVITINTERNET CONNECTIVITINTERNET CONNECTIVITINTERNET CONNECTIVITYYYY CHECK CHECK CHECK CHECK There are Ping ISP Default Gateway/ Primary DNS server Ping ISP Default Gateway/ Primary DNS server Ping ISP Default Gateway/ Primary DNS server Ping ISP Default Gateway/ Primary DNS server and they will show PASSPASSPASSPASS or FAILFAILFAILFAIL Please click the TestTestTestTest button to Diagnostic the above test items.
Section 3 - Configuration D-Link DSL-2740B User Manual 77 SYSTEM LOG The system Log allows you to configure local, remote and email logging, and to view the logs that have been created. REMOTE LOG SETTINGREMOTE LOG SETTINGREMOTE LOG SETTINGREMOTE LOG SETTING ENABLE EMAIL NOTIFICATION Please enable. If any logs occur, the system will send mail to the mail address you set. Log Level: All events above or equal to the selected level will be logged. Display Level: All logged events above or equal to the selected level will be displayed. Mode: Display mode of system log. Local: Display on local host only Remote: Send log file to remote system log server only Server IP Address: IP address of the remote system log server Server UDP Port: UDP port number of the remote system log server
Section 3 - Configuration D-Link DSL-2740B User Manual 78 EMAIL SETTINGSEMAIL SETTINGSEMAIL SETTINGSEMAIL SETTINGS Please type the From MAIL AddressFrom MAIL AddressFrom MAIL AddressFrom MAIL Address,,,, To MAIL AddressTo MAIL AddressTo MAIL AddressTo MAIL Address and SMTP Server AddressSMTP Server AddressSMTP Server AddressSMTP Server Address.... Please Enable the Enable AuthenticationEnable AuthenticationEnable AuthenticationEnable Authentication and then set the Account NameAccount NameAccount NameAccount Name, Account Password Account Password Account Password Account Password and Verity PasswordVerity PasswordVerity PasswordVerity Password. EMAIL LOG WHEN FULLEMAIL LOG WHEN FULLEMAIL LOG WHEN FULLEMAIL LOG WHEN FULL Please Enable the On Log Full. When the log file is full, the system will send mail to the mail address you set. VIEW SYSTEM LOGVIEW SYSTEM LOGVIEW SYSTEM LOGVIEW SYSTEM LOG The system will show logs in the list by Date/TimeDate/TimeDate/TimeDate/Time, FacilityFacilityFacilityFacility, SeSeSeSeverityverityverityverity and MessageMessageMessageMessage. Please click the Apply Settings Apply Settings Apply Settings Apply Settings button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 79 SCHEDULE Schedule allows you to create scheduling rules to be applied for your firewall. Maximum of 16 entries SCHEDULE RULESCHEDULE RULESCHEDULE RULESCHEDULE RULE Please click the AddAddAddAdd or EditEditEditEdit button to configure the schedule policy. ADD SCHEDULE RULEADD SCHEDULE RULEADD SCHEDULE RULEADD SCHEDULE RULE Please type the NameNameNameName Please choose all weekall weekall weekall week or SunSunSunSun, MonMonMonMon, TueTueTueTue, WedWedWedWed, ThuThuThuThu, FriFriFriFri or SatSatSatSat. Please set the Start Time Start Time Start Time Start Time and End TimeEnd TimeEnd TimeEnd Time. Please type the ApplyApplyApplyApply button to save the configuration.
Section 3 - Configuration D-Link DSL-2740B User Manual 80 STATUS Click on the STATUS tab to reveal the window buttons for various functions located in this directory. The DEVICE STATUS window is the first item in the STATUS directory. Use these windows to view system information and monitor performance. DEVICE INFO The Device Info page displays a summary overview of your router status, including: Device software version and summary of your Internet configuration (both wireless and Ethernet status). To access the DEVICE STATUS LOG setting window, click on the Device Info button in the STATUS directory. GENERAL This window displays current system time, the firmware version and the Released Date.
Section 3 - Configuration D-Link DSL-2740B User Manual 81 INTERNET INFO This window displays WAN information including IP address, Mask, Default Gateway, Primary/Secondary DNS Server. WIRELESS LAN This window displays authenticated wireless stations and their status.
Section 3 - Configuration D-Link DSL-2740B User Manual 82 LOCAL NETWORK INFO This window displays LAN information including MAC, IP address, Mask, and DHCP Server.
Section 3 - Configuration D-Link DSL-2740B User Manual 83 CONNECTED CLIENTS This feature shows all the currently connected wireless and LAN computers or PCs. CONNECTED WIRELESS CLIENTS This window displays authenticated wireless stations and their status. CONNECTED LAN CLIENTS This window displays all the entities which link to the LAN interface successfully. You can choose to block which entities and click the Block button BLOCKED MAC ADDRESS Click the Unblock button to unblock the blocked entities.
Section 3 - Configuration D-Link DSL-2740B User Manual 84 STATISTICS This information reflects the current status of your router. WAN STATISTICS This window displays all the Receiver and Transmitted packet status on the WAN interface. LAN STATISTICS This window displays all the Receiver and Transmitted packet status on the LAN interface.
Section 3 - Configuration D-Link DSL-2740B User Manual 85 ADSL STATISTICS This window displays all the ADSL status
Section 3 - Configuration D-Link DSL-2740B User Manual 86 You can click the ADSL BER Test button to test the ADSL connection. You can click the Reset Statistics button to set all statistics to recount.
Section 3 - Configuration D-Link DSL-2740B User Manual 87 ROUTE INFO To access the ROUTE INFO setting window, click on the ROUTE INFO button under the STATUS tab. The Route Info section displays route information showing the IP addresses of the destination, gateway, and subnet mask as well as other route information
Section 4 - Troubleshooting D-Link DSL-2740B User Manual 88 Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DSL-2740B. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples.) 1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: • Internet Explorer 6.0 or higher • Firefox 1.5 or higher • Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. • Disable any internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it.
Section 4 - Troubleshooting D-Link DSL-2740B User Manual 89 • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click on the Internet Options Icon. From the Security tab, click on the button to restore the settings to their defaults. • Click on the Connection tab and set the dial-up option to Never Dial a Connection. Click on the LAN Settings button. Make sure nothing is checked. Click on the OK. • Go to the Advanced tab and click on the button to restore these settings to their defaults. Click on the OK button three times. • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for the web management. • If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password? If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.1.1. When logging in, type in the default User Name “admin,” and the default Password “admin” then click on the OK button to access the web-based manager.
Appendix A - Wireless Basics D-Link DSL-2740B User Manual 90 Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. What is Wireless? Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).
Appendix A - Wireless Basics D-Link DSL-2740B User Manual 91 Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access • Surf the web, check email, instant message, download multimedia files. • Gets rid of the cables around the house • Simple and easy to use Small Office and Home Office • Stay on top of everything at home as you would at the office • Remotely access your office network from home • Share the Internet connection and printer with multiple computers • No need to dedicate office space Where is wireless used? Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.
Appendix A - Wireless Basics D-Link DSL-2740B User Manual 92 Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA security feature on the router. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more D-Link wireless network adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.
Appendix B - Networking Basics D-Link DSL-2740B User Manual 93 Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click on the OK. At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. If you are connecting to a wireless network at a hotspot (e.g. hotel, coffee shop, airport), please contact an employee or administrator to verify their wireless network settings.
Appendix B - Networking Basics D-Link DSL-2740B User Manual 94 Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® XP - Click on Start > Control Panel > Network Connections. Windows® 2000 - From the desktop, right-click on the My Network Places > Properties. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click on the Properties. Step 4 Click on the Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click on the OK twice to save your settings.
Appendix C – Technical Specification D-Link DSL-2740B User Manual 95 Technical Specifications ADSL Standards • ANSI T1.413 Issue 2 • ITU G.992.1 (G.dmt) AnnexA • ITU G.992.2 (G.lite) Annex A • ITU G.994.1 (G.hs) • ITU G.992.5 Annex A ADSL2 Standards • ITU G.992.3 (G.dmt.bis) Annex A • ITU G.992.4 (G.lite.bis) Annex A Protocols • IEEE 802.1d Spanning Tree • TCP/UDP • ARP • RARP • ICMP • RFC1058 RIP v1 • RFC1213 SNMP v1 & v2c • RFC1334 PAP • RFC1389 RIP v2 • RFC1577 Classical IP over ATM • RFC1483/2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5 (AAL5) • RFC1661 Point to Point Protocol • RFC1994 CHAP • RFC2131 DHCP Client / DHCP Server • RFC2364 PPP over ATM • RFC2516 PPP over Ethernet Data Transfer Rate • G.dmt full rate downstream: up to 8 Mbps / upstream: up to 1 Mbps • G.lite: ADSL downstream up to 1.5 Mbps / upstream up to 512 Kbps • G.dmt.bis full rate downstream: up to 12 Mbps / upstream: up to 12 Mbps • ADSL full rate downstream: up to 24 Mbps / upstream: up to 1 Mbps Media Interface • ADSL interface: RJ-11 connector for connection to 24/26 AWG twisted pair telephone line • LAN interface: RJ-45 port for 10/100BASE-T Ethernet connection WIRELESS LAN • 802.11b/g/n standards • Wireless speed: up to 300Mbps (802.11n) • Frequency range: 2.4 GHz to 2.484G Hz • Antennas: 2 non-detachable dipole antennas. • WEP data encryption • WPA/WPA2 (Wi-Fi Protected Access) security • Multiple SSID • 802.11e Wireless QoS (WMM/WME) • MAC address-based access control * Maximum wireless signal rate derived from IEEE Standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
Appendix D –Contacting Technical Support D-Link DSL-2740B User Manual 96 FCC Caution Statement：：：： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Class B: FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a Particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. Supprot: DSL-2750B, DSL-2740B. DSL-2741B, DSL-2740U, DSL-2741U
Appendix D –Contacting Technical Support D-Link DSL-2740B User Manual 97 IC Caution English: This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Française: Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement.
Appendix D –Contacting Technical Support D-Link DSL-2740B User Manual 98 Contacting Technical Support You can find software updates and user documentation on the D-Link websites. If you require product support, we encourage you to browse our FAQ section on the Web Site before contacting the Support line. We have many FAQ’s which we hope will provide you a speedy resolution for your problem. For Customers within the United Kingdom & Ireland: D-Link UK & Ireland Technical Support over the Internet: http://www.dlink.co.uk ftp://ftp.dlink.co.uk D-Link UK & Ireland Technical Support over the Telephone: 08456 12 0003 (United Kingdom) +1890 886 899 (Ireland) Lines Open 8.00am-10.00pm Mon-Fri 10.00am-7.00pm Sat & Sun For Customers within Canada: D-Link Canada Technical Support over the Telephone: 1-800-361-5265 (Canada) Mon. to Fri. 7:30AM to 9:00PM EST D-Link Canada Technical Support over the Internet: http://support.dlink.ca email: support@dlink.ca

Navigation menu