D Link IR868LA1 Wireless AC1750 Dual Band Gigabit Cloud Router USB 3.0 User Manual Part 1

D Link Corporation Wireless AC1750 Dual Band Gigabit Cloud Router USB 3.0 Part 1

Contents

User Manual Part 1

Version 1.0 | 01/16/2013User ManualDIR-868LWireless AC1750 Dual-Band GigabitCloud Router USB 3.0
iD-Link DIR-868L User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Copyright © 2013 by D-Link Corporation.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.Revision Date Description1.0 January 16, 2013 • Initial releasePreface
iiD-Link DIR-868L User ManualTable of ContentsPreface ................................................................................. iManual Revisions ........................................................................... iTrademarks ...................................................................................... iProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................4Hardware Overview ..................................................................... 5Connections ...........................................................................5LEDs ........................................................................................... 6Installation ......................................................................... 7Before you Begin ........................................................................... 7Wireless Installation Considerations ...................................... 8Manual Setup .................................................................................9Conguration ...................................................................11D-Link Quick Setup Wizard .....................................................12QRS Mobile App (iOS, Android) .............................................19SharePort Mobile App (iOS, Android) .................................20Web-based Conguration Utility ..........................................24Internet Connection Setup .............................................25Static IP ..............................................................................26Dynamic IP (DHCP) ........................................................27PPPoE (Username/Password) ....................................28PPTP ....................................................................................30L2TP ....................................................................................31DS-Lite ...............................................................................33Wireless Settings .................................................................34Wireless Connection Setup Wizard..........................35Wireless Security Setup Wizard .................................38Add Wireless Device with WPS Wizard ...................40Manual Wireless Settings .................................................42802.11 b/g/n (2.4GHz) ..................................................42802.11ac draft (5GHz) ...................................................43Network Settings ................................................................44Router Settings ...............................................................45DHCP Server Settings ...................................................46DHCP Reservation .........................................................47Storage ...................................................................................48Media Server.........................................................................49IPv6 ..........................................................................................50IPv6 Internet Connection Setup Wizard ................51Manual IPv6 Local Connectivity Setup ..................56IPv6 Manual Setup.........................................................57mydlink Settings .................................................................68Advanced ......................................................................................69Virtual Server ........................................................................69Port Forwarding ..................................................................70Application Rules ................................................................71QoS Engine............................................................................72Network Filters .....................................................................74Access Control .....................................................................75Table of Contents
iiiD-Link DIR-868L User ManualTable of ContentsWebsite Filters ......................................................................78Inbound Filter ......................................................................79Firewall Settings ..................................................................80Routing ...................................................................................82Advanced Wireless .............................................................83Wi-Fi Protected Setup .......................................................84Advanced Network ............................................................86Guest Zone ............................................................................87IPv6 Firewall ..........................................................................88IPv6 Routing .........................................................................89Tools ................................................................................................90Admin .....................................................................................90Time .........................................................................................91SysLog .....................................................................................92Email Settings ......................................................................93System ....................................................................................94Firmware ................................................................................95Firmware Upgrade .........................................................95Language Pack ................................................................95Dynamic DNS .......................................................................96System Check .......................................................................97Schedules ..............................................................................98Status ..............................................................................................99Device Info ............................................................................99Logs ...................................................................................... 100Statistics .............................................................................. 101Internet Sessions .............................................................. 102Routing ................................................................................ 103Wireless ............................................................................... 104IPv6 ....................................................................................... 105IPv6 Routing ...................................................................... 106Support ....................................................................................... 107Connect a Wireless Client to your Router ....................108WPS Button ................................................................................ 108Windows® 7 ................................................................................ 109WPA/WPA2 ......................................................................... 109WPS ....................................................................................... 112Windows Vista® ......................................................................... 116WPA/WPA2 ......................................................................... 117WPS/WCN 2.0 .................................................................... 119Windows® XP ............................................................................. 120WPA/WPA2 ......................................................................... 121Troubleshooting ............................................................123Wireless Basics ...............................................................127What is Wireless? ...................................................................... 128Tips ................................................................................................ 130Wireless Modes ......................................................................... 131Networking Basics .........................................................132Check your IP address ............................................................ 132Statically Assign an IP address ............................................ 133Wireless Security ......................................................... 134What is WPA? ................................................................ 134Technical Specications ................................................135
1D-Link DIR-868L User ManualSection 1 - Product OverviewProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DIR-868L will cause damage and void the warranty for this product.If any of the above items are missing, please contact your reseller.DIR-868L Wireless AC1750 Dual-Band Gigabit Cloud Router USB 3.0Ethernet CablePower AdapterWi-Fi Conguration NoteWi-Fi Conguration Note
2D-Link DIR-868L User ManualSection 1 - Product OverviewNetwork Requirements • An Ethernet-based Cable or DSL modem• 802.11ac (draft), n, g, b, or a wireless or Ethernet portWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 7 or higher• Firefox 3.5 or higher• Safari 4 or higher• Chrome 8 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.mydlink Requirements• iPhone/iPad/iPod Touch (iOS 3.0 or higher)• Android device (1.6 or higher)• Computer with the following browser requirements:• Internet Explorer 7 or higher• Firefox 3 or higher• Safari 5 or higher• Chrome 5 or higheriPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc.System Requirements
3D-Link DIR-868L User ManualSection 1 - Product OverviewIntroductionThe D-Link Wireless AC1750 Dual-Band Gigabit Cloud Router USB 3.0 (DIR-868L) comes equipped with four Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. It also uses 802.11ac (draft) technology with multiple intelligent antennas to maximize the speed and range of your wireless signal to signicantly outperform 802.11n devices. With the addition of Intelligent Quality of Service (QoS), data streams are separated which helps organize and prioritize your network trac so your video streaming, gaming, and VoIP calls run smoother over both your wired and wireless network.The DIR-868L supports a host of cloud features inclouding QRS Mobile which allows you to setup and congure the router using a mobile app. You can set up your router right from your sofa, no PC required.The Wireless AC1750 Dual-Band Gigabit Cloud Router USB 3.0 is also mydlink-enabled, which gives you access to your home network no matter where you go. Now you can monitor and manage your home network right from your laptop, iPhone®, iPad®, or Android™ device. mydlink-enabled routers can be congured to send an email to keep you informed anywhere, anytime when new devices are connecting to your network or unwanted access is detected. Monitor in real-time websites that are being visited with recent browser history displayed on the mydlink™ Lite app – which is great for parents.SharePort Mobile technology lets you take advantage of the USB 3.0 port found on the back of your DIR-868L. Plug in a USB storage drive and you can use the SharePort Mobile app for iOS and Android to access les, stream videos, view photos, or listen to music on your laptop or mobile devices. Plug in a printer and you can use the SharePort Mobile Plus app to share that printer with all of your devices.The DIR-868L Wireless AC1750 Dual-Band Gigabit Cloud Router USB 3.0 provides incredible speeds, smart antenna technology, fast ports, cloud features, and terric security features. It also features an innovative design and easy installation options.
4D-Link DIR-868L User ManualSection 1 - Product Overview• Faster Wireless Networking - The DIR-868L can provide up to a full 1750Mbps* wireless connection with concurrent 801.11ac and 802.11n wireless clients . It also operates on both the 2.4 GHz and 5 GHz bands to allow separation of trac so users can participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without aecting low-priority trac like email and web surng.• Cloud Features - The DIR-868L support the QRS Mobile app to setup the router using a mobile device. It is also mydlink-enabled so you can remotely access and mange your DIR-868L from a mobile device. SharePort Mobile can be used to share les, stream videos, view photos, and play music. SharePort Plus lets you share a printer.• Compatible with 802.11a/b/g/n Devices - The DIR-868L is still fully compatible with the 802.11n, IEEE 802.11g and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless devices.• Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including: • Content Filtering - Easily applied content ltering based on MAC Address, URL, and/or Domain Name.• Filter Scheduling - These lters can be scheduled to be active on certain days or for a duration of hours or minutes.• Secure Multiple/Concurrent Sessions - The DIR-868L can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-868L can securely access corporate networks.• User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-868L lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company’s server. Congure your router to your specic settings within minutes.* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
5D-Link DIR-868L User ManualSection 1 - Product OverviewHardware OverviewConnections1USB 3.0 Port Connect a USB ash drive to share content , or connect it to a USB printer to share it on your network.2WPS Button Press to start the WPS process and automatically create a secure connection to a WPS client.3Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.4Gigabit Internet Port Using an Ethernet cable, connect your broadband modem to this port.5Power Button Press the power button to power on and o.6Power Receptor Receptor for the supplied power adapter.7Reset Button Insert a paperclip in the hole and wait for several seconds to reset the router to default settings.4562137
6D-Link DIR-868L User ManualSection 1 - Product OverviewHardware OverviewLEDs1Power LED A solid green light indicates a proper connection to the power supply. The light will blink green during the WPS process. The light will be a solid orange during boot up.2Internet LED A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet.12
7D-Link DIR-868L User ManualSection 2 - InstallationBefore you BeginInstallationThis section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. • Please congure the router with the computer that was last connected directly to your modem. • You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn o your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet.
8D-Link DIR-868L User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
9D-Link DIR-868L User ManualSection 2 - Installation1. Turn o and unplug your cable or DSL broadband modem. This is required.Manual Setup42. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage.3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer.ModemDIR-868LComputer
10D-Link DIR-868L User ManualSection 2 - Installation4. Plug one end of the included Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem.INTERNET5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.6. Connect the supplied power adapter into the power receptor on the back of the router and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. 1INTERNET7. If you are connecting to a Broadband service, you may be online already and further conguration will be optional.DIR-868LDIR-868LModemComputerModemComputer
11D-Link DIR-868L User ManualSection 2 - InstallationThere are several dierent ways you can congure your router to connect to the Internet and connect to your clients:• D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time. Refer to page 12.• QRS Mobile App - Use your iPhone, iPad, or iPod Touch to congure your router. Refer to page 19.• Manual Setup - Log into the router and manually congure your router (advanced users only). Refer to pagepage 26.Conguration
12D-Link DIR-868L User ManualSection 3 - CongurationThis wizard is designed to guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.Click Next to continue. D-Link Quick Setup WizardIf this is your rst time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen. If the wizard does not open automatically, you can alternately reach the configuration utility by entering the IP address of the router (http://192.168.0.1). Please refer to page 24.Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.
13D-Link DIR-868L User ManualSection 3 - CongurationIf the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Try Again.If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from.Select your Internet connection type and click Next to continue.
14D-Link DIR-868L User ManualSection 3 - CongurationIf the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue.
15D-Link DIR-868L User ManualSection 3 - CongurationIf the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. For both the 2.4GHz and 5GHz segments, create a Wi-Fi network name (SSID) using up to 32 characters.Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.Click Next to continue.In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue.
16D-Link DIR-868L User ManualSection 3 - CongurationSelect your time zone from the drop-down menu and click Next to continue. The Setup Complete window will display your Wi-Fi settings. Click Save and Connect to continue.If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark.If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark.
17D-Link DIR-868L User ManualSection 3 - CongurationTo use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select if you do have a mydlink account or if you need to create one. Click Next to continue.If you do not want to register at this time, click Cancel.If you clicked Yes, enter your mydlink account name (email address) and password. Click Login to register your router.If you clicked No, ll out the requested information and click Next to create your mydlink account.
18D-Link DIR-868L User ManualSection 3 - CongurationThe mydlink App will allow you to receive notices, browse network users, and congure your router from an iPhone/iPad/iPod Touch (iOS 3.0 or higher), Android device (1.6 or higher).To download the "mydlink lite" app, visit the Apple Store, Android Market or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com.
19D-Link DIR-868L User ManualSection 3 - CongurationQRS Mobile App (iOS, Android)D-Link oers an app for your iOS or Android device to install and congure your router. Step 1From an iOS device, go to the iTunes Store. From an Android device go to Google Play. Search for ‘D-Link’, select QRS Mobile, and download the app to your device. You may also scan the appropriate code on the right to locate the app download page.Step 2Once your app is installed, you may now congure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password.Step 3Once you connect to the router, launch the QRS mobile app and it will guide you through the installation of your router.iOS Android
20D-Link DIR-868L User ManualSection 3 - Conguration2. Use your iOS or Android mobile device to scan the QR code to the right to download the SharePort Mobile app. You can also search for the SharePort Mobile app directly in the iOS App Store or Google Play.SharePort Mobile App (iOS, Android)3. From your iOS or Android mobile device, choose Settings.Note: These steps are for the iOS version of the app. The Android version may dier slightly. SettingsiOS AndroidUSB port1. Plug your USB storage drive into the USB port. Note: The DIR-868L supports hard drives with up toone terabyte of storage capacity.The SharePort Mobile app will allow you to access les from a USB storage drive that is plugged into your router. You must enable le sharing from the Setup > Storage page (refer to page 22) for this app to work properly.
21D-Link DIR-868L User ManualSection 3 - Conguration4. Click Wi-Fi, select the Wi-Fi Network Name (SSID) that you created during setup and then enter the default Wi-Fi password located on your Wi-Fi conguration note.6. The following screen will appear.5. Once connected, tap on the SharePort Mobile icon.
22D-Link DIR-868L User ManualSection 3 - Conguration7. Tap on the Settings icon located on the right top corner of the screen. Tap Edit to enter your User Name and Password (the default username is admin and the password eld should be left blank). Once you nish, click Done to continue.9. For the Music section, click the music icon to play your music from your USB ash drive.8. For the Movie section, click the movie icon to play your movie from your USB ash drive.
23D-Link DIR-868L User ManualSection 3 - Conguration10. For the Photo section, click the Photo icon to view your photos from your USB ash drive.11. For the Files section, click on the Files icon to view your les from your USB ash drive.12. For the Folder section, click the folder icon to view your folders from your USB ash drive.
24D-Link DIR-868L User ManualSection 3 - CongurationWeb-based Conguration UtilityEnter your password. The password should be left blank by default.To access the conguration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local. Windows and Mac users may also connect by typing the IP address of the router (http://192.168.0.1) in the address bar.
25D-Link DIR-868L User ManualSection 3 - CongurationInternet Connection SetupIf you want to congure your router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. You will be directed to the Quick Setup Wizard. Please refer to page 12.Click Manual Internet Connection Setup to congure your connection manually and continue to the next page.
26D-Link DIR-868L User ManualSection 3 - CongurationSelect Static IP to manually enter the IP settings supplied by your ISP.Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.Check to enable true Gigabit routing. This will increase the through-put of the WAN-LAN connectivity of the router.Enter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.Enter the Gateway assigned by your ISP.The DNS server information will be supplied by your ISPMaximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.My Internet Connection Is:Enable Advanced DNS Service:Enable True Gigabit Routing Connectivity:IP Address:Subnet Mask:Default Gateway:DNS Servers:MTU:MAC Address:Manual Internet SetupStatic IPSelect your connection type from the My Internet Connect Is drop-down box. Choose Static IP if all of the port’s IP information has been provided by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address(es). Each IP address entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
27D-Link DIR-868L User ManualSection 3 - CongurationSelect Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services.Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.Check to enable true Gigabit routing. This will increase the through-put of the WAN-LAN connectivity of the router.The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.Check the box if you are having problems obtaining an IP address from your ISP.Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not specically receive these from your ISP.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.My Internet Connection:Enable Advanced DNS Service:Enable True Gigabit Routing Connectivity:Host Name:Use Unicasting:Primary/Secondary DNS Server:MTU:MAC Address:Dynamic IP (DHCP)If you are unsure what method you use to connect to the Internet, try this rst. Cable modems usually use this type of connection
28D-Link DIR-868L User ManualSection 3 - CongurationSelect PPPoE (Username/Password) from the drop-down menu.Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.Check to enable true Gigabit routing. This will increase the through-put of the WAN-LAN connectivity of the router.Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and then retype the password in the next box.Enter the ISP Service Name (optional).Select either Always-on, On-Demand, or Manual.My Internet Connection:Enable Advanced DNS Service:Enable True Gigabit Routing Connectivity:Address Mode:IP Address:User Name:Password:Service Name:Reconnect Mode:PPPoE (Username/Password)Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.
29D-Link DIR-868L User ManualSection 3 - CongurationMaximum Idle Time:DNS Addresses:MTU:MAC Address:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only).Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
30D-Link DIR-868L User ManualSection 3 - CongurationSelect PPTP (Username/Password) from the drop-down menu.Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.PPTPChoose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:Enable Advanced DNS Service:Enable True Gigabit Routing Connectivity:Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway:PPTP Server IP:Username:Password:Reconnect Mode:
31D-Link DIR-868L User ManualSection 3 - CongurationSelect L2TP (Username/Password) from the drop-down menu.Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time.Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.Check to enable true Gigabit routing. This will increase the throughput of the WAN-LAN connectivity of the router.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPTP only).Enter the Primary and Secondary DNS Server Addresses (Static PPTP only).Enter the Gateway IP Address provided by your ISP.Enter the Server IP provided by your ISP (optional).Enter your PPTP username.Enter your PPTP password and then retype the password in the next box.Select either Always-on, On-Demand, or Manual.L2TPChoose L2TP (Layer 2 Tunneling Protocol ) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:Enable Advanced DNS Service:Enable True Gigabit Routing Connectivity:Address Mode:PPTP IP Address:PPTP Subnet Mask:PPTP Gateway:PPTP Server IP:Username:Password:Reconnect Mode:
32D-Link DIR-868L User ManualSection 3 - CongurationEnter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.The DNS server information will be supplied by your ISP (Internet Service Provider.)Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1400 is the default MTU.The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.Maximum Idle Time:DNS Servers:MTU:MAC Address:
33D-Link DIR-868L User ManualSection 3 - CongurationDS-LiteDS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for conguration:DS-LiteConguration:AFTR IPv6 Address:B4 IPv4 Address:WAN IPv6 Address:IPv6 WAN DefaultGateway:Select the DS-Lite DHCPv6 option to let the router allocate the AFTR IPv6 address automatically. Select the Manual Conguration to enter the AFTR IPv6 address in manually.After selecting the Manual Conguration option above, enter the AFTR IPv6 address used here.Enter the B4 IPv4 address value used here.Once connected, the WAN IPv6 address will be displayed here.Once connected, the IPv6 WAN Default Gateway address will be displayed here.
34D-Link DIR-868L User ManualSection 3 - CongurationWireless SettingsIf you want to congure the wireless settings on your router using the wizard, click Wireless Network Setup Wizard and refer to page 42.Click Add Wireless Device with WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 44.If you want to manually congure the wireless settings on your router click Manual Wireless Network Setup and refer to the next page.
35D-Link DIR-868L User ManualSection 4 - SecurityWireless Connection Setup WizardTo run the security wizard, click on Setup at the top and then click Wireless Connection Setup Wizard.STEP 1: Type your desired wireless network names (SSIDs) for both the 2.4 GHz band and the 5 GHz band. Automatically: Select this option to automatically generate the router’s network key and click Next.Manually: Select this option to manually enter your network key and click Next.
36D-Link DIR-868L User ManualSection 4 - SecurityIf you selected Automatically, the option to make your password the same on both bands with be oered. If you choose to make them the same, you can select your own password in the box below.Click Next. You will now see a summary window that displays your settings. Write down the security key and enter this on your wireless clients.Click Save to save your settings.
37D-Link DIR-868L User ManualSection 4 - SecurityIf you selected Manually, the option to make your password the same on both bands with be oered.Enter your wireless password in the box below.Click Next. You will now see a summary window that displays your settings. Write down the security key and enter this on your wireless clients.Click Save to save your settings.
38D-Link DIR-868L User ManualSection 4 - SecurityWireless Security Setup WizardTo run the security wizard, click on Setup at the top and then click Wireless Network Setup Wizard.Type your desired wireless network name (SSID). Automatically: Select this option to automatically generate the router’s network key and click Next.Manually: Select this option to manually enter your network key and click Next.If you are unfamiliar with the types of wireless security, more information is located in the appendix at back of this manual.
39D-Link DIR-868L User ManualSection 4 - SecurityIf you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. If you selected Manually, the following screen will appear. Create a passphrase for your security password. Click Next to continue.
40D-Link DIR-868L User ManualSection 4 - SecurityFrom the Setup > Wireless Settings screen, click Add Wireless Device with WPS.Add Wireless Device with WPS WizardIf you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. Click OK to nish.Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup) and then click Next. Skip to the next page. If you are unfamiliar with the types of wireless security, more information is located in the appendix at back of this manual.
41D-Link DIR-868L User ManualSection 4 - SecurityPIN: Select this option to use PIN method. In order to use this method you must know the wireless client’s 8 digit PIN and click Connect.PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect.Once you click Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection.
42D-Link DIR-868L User ManualSection 3 - CongurationCheck the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.Select the time frame that you would like your wireless network enabled. The schedule may be set to Always. Any schedule you create will be available in the drop-down menu. Click New Schedule to create a schedule.Service Set Identier (SSID) is the name of your wireless network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive.Select one of the following:802.11b Only - Select only if all of your wireless clients are 802.11b.802.11g Only - Select only if all of your wireless clients are 802.11g.802.11n Only - Select only if all of your wireless clients are 802.11n.Mixed 802.11g and 802.11b - Select if you are using both 802.11g and 802.11b wireless clients.Mixed 802.11n and 802.11g - Select if you are using both 802.11n and 802.11g wireless clients.Mixed 802.11n, 11g, and 11b - Select if you are using a mix of 802.11n, 802.11g, and 802.11b wireless clients.The Auto Channel Scan setting can be selected to allow the DIR-868L to choose the channel with the least amount of interference.Indicates the channel setting for the DIR-868L. By default the channel is set to 6. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out.Select the Channel Width:Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.20MHz - Select if you are not using any 802.11n wireless clients.Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-868L. If Invisible is selected, the SSID of the DIR-868L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-868L in order to connect to it.Refer to the appendix in the back of the manual for more information regarding wireless security.Enable Wireless:Schedule:Wireless Network Name:802.11 Mode:Enable Auto Channel Scan:Wireless Channel:Manual Wireless SettingsChannel Width:Visibility Status:Wireless Security:802.11 b/g/n (2.4GHz)If you are unfamiliar with the types of wireless security, more information is located in the appendix at back of this manual.
43D-Link DIR-868L User ManualSection 3 - Conguration802.11ac draft (5GHz)Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions.Select the time frame that you would like your wireless network enabled. The schedule may be set to Always. Any schedule you create will be available in the drop-down menu. Click New Schedule to create a schedule.Service Set Identier (SSID) is the name of your wireless network. Create a name for your wireless network using up to 32 characters. The SSID is case-sensitive.Select one of the following:802.11n Only - Select only if all of your wireless clients are 802.11n.802.11ac Only - Select if all of your wireless clients are 802.11ac.Mixed 802.11n and 802.11a - Select if you are using both 802.11n and 802.11a wireless clients.Mixed 802.11ac and 802.11n - Select if you are using both 802.11ac and 802.11n wireless clients.Mixed 802.11ac and 802.11a - Select if you are using both 802.11ac and 802.11a wireless clients.The Auto Channel Scan setting can be selected to allow the DIR-868L to choose the channel with the least amount of interference.Indicates the channel setting for the DIR-868L. By default the channel is set to 6. The Channel can be changed to t the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be greyed out.Select the Channel Width:Auto 20/40/80 - Select if you are using both 802.11ac, 802.11n and non-802.11n wireless devices.Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.20MHz - Select if you are not using any 802.11n wireless clients.Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-868L. If Invisible is selected, the SSID of the DIR-868L will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-868L in order to connect to it.Refer to the next page for more information regarding wireless security.Enable Wireless:Schedule:Wireless Network Name:802.11 Mode:Enable Auto Channel Scan:Wireless Channel:Channel Width:Visibility Status:Wireless Security:
44D-Link DIR-868L User ManualSection 3 - CongurationThis section will allow you to change the local network settings of the router and to congure the DHCP settings.Network Settings
45D-Link DIR-868L User ManualSection 3 - CongurationThis section will allow you to congure the router settings.Router SettingsEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the Subnet Mask. The default subnet mask is 255.255.255.0.Enter a name for the router.Enter the Domain name (Optional).Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server.Router IP Address:Subnet Mask:Device Name:Local Domain:Enable DNS Relay:
46D-Link DIR-868L User ManualSection 3 - CongurationDHCP Server SettingsDHCP stands for Dynamic Host Control Protocol. The DIR-868L has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-868L. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.Check this box to enable the DHCP server on your router. Uncheck to disable this function.Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. The length of time for the IP address lease. Enter the Lease time in minutes.Enable this feature to broadcast your networks DHCP server to LAN/WLAN clients.NetBIOS allows LAN hosts to discover all other computers within the network, enable this feature to allow the DHCP Server to oer NetBIOS conguration settings.Enable this feature to allow WINS information to be learned from the WAN side, disable to allow manual conguration.This feature allows the conguration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no eect if the ‘Learn NetBIOS information from WAN’ is activated.Select the dierent type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid.Enter your WINS Server IP address(es).Enable DHCP Server:DHCP IP Address Range:DHCP Lease Time:Always Broadcast:NetBIOS Announcement:Learn NetBIOS from WAN:NetBIOS Scope:NetBIOS Node:WINS IP Address:
47D-Link DIR-868L User ManualSection 3 - CongurationDHCP ReservationIf you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range.Check this box to enable the reservation.Enter the computer name or select from the drop-down menu and click <<.Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range.Enter the MAC address of the computer or device.If you want to assign an IP address to the computer you are currently on, click this button to populate the elds. Click Save to save your entry. You must click Save Settings at the top to activate your reservations. Displays any reservation entries. Displays the host name (name of your computer or device), MAC Address, and IP address.Check to enable the reservation.Click the edit icon to make changes to the reservation entry.Click to remove the reservation from the list.Enable:Computer Name:IP Address:MAC Address:Copy Your PC’s MAC Address:Save:DHCP Reservations List:Enable:Edit:Delete:DHCP Reservations List
48D-Link DIR-868L User ManualSection 3 - CongurationStorageThis page will allow you to set up access to les on an external USB hard drive1 or thumb drive that is plugged into the router. You can do this through local network or from the Internet using either a web browser or an app on your smartphone or tablet. You can create users that can be allowed access to these les through SharePort Mobile services accessible through a web UI or on mobile devices using the SharePort Mobile app available for iOS and Android.1 Supports capacities of up to 1TB for USB storage drives.Check this box if you wish to be able to access SharePort through a browser as well as the mobile app.Enter the port you want to use when accessing SharePort using a web browser.Enter the port you want to use when accessing SharePort through a secure connection using a web browser.Check this box if you wish to be able to access SharePort through a web browser over the Internet.To give a new user access to your SharePort storage, enter a User Name and Password here. You can Add new users or choose existing users from the drop-down menu if you wish to Edit or Delete them.Note: The Admin password is the same as the admin password for the router. The Guest password is “guest” and cannot be changed.This list displays all of the users with access to the SharePort Mobile content, what they can access, and their Read/Write Permissions. All devices you have set up for SharePort access will be listed here.This area will display the HTTP and HTTPS links to connect to your SharePort drive through a web browser from a device on your network.Enable SharePort Web AccessHTTP Access Port:HTTPS Access Port:Allow Remote Access:User Creation:User List:Number of Devices:SharePort Web Access Link:
49D-Link DIR-868L User ManualSection 3 - CongurationMedia ServerThis page will allow you to enable a DLNA Media Server. DLNA (Digital Living Network Alliance) is the standard for the interoperability of Network Media Devices (NMDs). The user can enjoy multimedia applications (music, pictures and videos) on your network connected PC or media devices. If you agree to share media with devices, any computer or device that connects to your network can play your shared music, pictures and videos.Note: The shared media may not be secure. Allowing any devices to stream is recommended only on secure networks.Check to enable DLNA Media Server functions.Choose a name for your DLNA media server so that it can be found.Choose the location of the folder you wish to share or check the box to use the root folder of the entire drive.Check to enable iTunes Server functions.Choose the location of the iTunes Library folder you wish to share or check the box to use the root folder if it is located on the root folder of the connected drive.Use this setting to enable USB 3.0 functionality for the USB port on the back of the router. USB 3.0 provides high-speed transfer speeds with compatible devices. This setting is disabled bydefault, which means that the USB port will operate at the USB2.0 specication.DLNA Server:DLNA Server Name:Folder:iTunes Server:Folder:USB 3.0:
50D-Link DIR-868L User ManualSection 3 - CongurationIPv6On this page, you can congure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually congure the connection.If you are a beginner that has not congured a router before, click on the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running.If you are an advanced user that has congured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually.
51D-Link DIR-868L User ManualSection 3 - CongurationIPv6 Internet Connection Setup WizardOn this page, the user can congure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard.Click the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running.Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page.The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found.
52D-Link DIR-868L User ManualSection 3 - CongurationHowever, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard.There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling Connection. Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page.Click on the Next button to continue. Click on the Prev button to return to the previous page.Click on the Cancel button to discard all the changes made and return to the main page.
53D-Link DIR-868L User ManualSection 3 - CongurationIPv6 over PPPoEAfter selecting the IPv6 over PPPoE option, the user will be able to congure the IPv6 Internet connection that requires a username and password to get online. Most DSL modems use this type of connection.The following parameters will be available for conguration:PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares it’s information with the already congured IPv6 PPPoE connection, or the user can create a new PPPoE connection here.User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP.Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP.Verify Password: Re-enter the PPPoE password used here.Service Name: Enter the service name for this connection here. This option is optional.
54D-Link DIR-868L User ManualSection 3 - CongurationStatic IPv6 Address ConnectionThis mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 conguration settings. You must enter the IPv6 address, Subnet Prex Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information.Use Link-Local Address:IPv6 Address:Subnet Prex Length:Default Gateway:Primary DNS Address:Secondary DNS Address:LAN IPv6 Address:The Link-local address is used by nodes and routers when communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side.Enter the WAN IPv6 address for the router here.Enter the WAN subnet prex length value used here.Enter the WAN default gateway IPv6 address used here.Enter the WAN primary DNS Server address used here.Enter the WAN secondary DNS Server address used here.These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The router’s LAN IPv6 Address conguration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prex /64 is supported in LAN.)
55D-Link DIR-868L User ManualSection 3 - CongurationThe IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page.Tunneling Connection (6rd)After selecting the Tunneling Connection (6rd) option, the user can congure the IPv6 6rd connection settings.Enter the 6rd IPv6 address and prex value used here.Enter the IPv4 address used here.Enter the IPv4 mask length used here.Displays the IPv6 assigned prex value here.Enter the 6rd border relay IPv4 address used here.Enter the primary DNS Server address used here.6rd IPv6 Prex:IPv4 Address:Mask Length:Assigned IPv6 Prex:6rd Border Relay IPv4 Address:IPv6 DNS Server:
56D-Link DIR-868L User ManualSection 3 - CongurationManual IPv6 Local Connectivity SetupYou can set up a local-only IPv6 Internet connection as well. If you want to congure an IPv6 connection that will not connect to the Internet, click on the Manual IPv6 Local Connectivity Settings button.Enable ULA:Use Default ULA Prex:ULA Prex:Current IPv6 ULA Settings:Click here to enable Unique Local IPv6 Unicast Addresses settings.Checking this box will automatically congure the ULA prex for the default setting.If you wish to choose your own ULA prex, enter it here.This section with display the current settings for your IPv6 ULA.
57D-Link DIR-868L User ManualSection 3 - CongurationIPv6 Manual SetupThere are several connection types to choose from: Auto Detection, Static IPv6, Autoconguration (SLAAC/DHCPv6), PPPoE, IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled.
58D-Link DIR-868L User ManualSection 3 - CongurationStatic IPv6Select Static IPv6 from the drop-down menu.Enter the address settings supplied by your Internet provider (ISP). Enter a subnet prex length.Enter the default gateway for your IPv6 connection.Enter the primary and secondary DNS server addresses. Enter the LAN (local) IPv6 address for the router. Displays the router’s LAN Link-Local Address.Check to enable the Autoconguration feature.Choose either Stateful DHCPv6, SLAAC + RDNSS or SLAAC + Stateless DHCPv6 from the drop-down menu. Enter the IPv6 Address Lifetime (in minutes).My IPv6 Connection Is:Use Link-Local Address:Subnet Prex Length:IPv6 Default Gateway:Primary/Secondary IPv6 DNS Servers:LAN IPv6 Address:LAN Link-Local Address:Enable Automatic IPv6 Address Assignment:Autoconguration Type:Router Advertisement Lifetime:
59D-Link DIR-868L User ManualSection 3 - CongurationAuto DetectionSelect Auto Detection from the drop-down menu.Select either Obtain DNS server address automatically or Use the following DNS Address.Enter the primary and secondary DNS server addresses. Check this box to enable DHCP-PD services.Enter the LAN (local) IPv6 address for the router. Displays the Router’s LAN Link-Local Address.Check to enable the Automatic IPv6 Address Assignment feature.Check this box to automatically enable DHCP-PD services.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the IPv6 Address Lifetime (in minutes).My IPv6 Connection Is:IPv6 DNS Settings:Primary/Secondary DNS Address:Enable DHCP-PD:LAN IPv6 Address:LAN Link-Local Address:Enable Automatic IPv6 Address Assignment:Enable Automatic DHCP-PD in LAN:Autoconguration Type:Router Advertisement Lifetime:
60D-Link DIR-868L User ManualSection 3 - CongurationPPPoESelect PPPoE from the drop-down menu.Enter the PPPoE account settings supplied by your Internet provider.Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.Enter the IP address (Static PPPoE only).Enter your PPPoE user name.Enter your PPPoE password and retype the password in the next box.Enter the ISP Service Name (optional).Select either Always-on, On-Demand, or Manual.Enter a maximum idle time during which the Internet connection is maintained during inactivity.Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.Select either Obtain DNS server address automatically or Use the following DNS Address.Enter the primary and secondary DNS server addresses. My IPv6 Connection Is:PPPoE Session:Address Mode:IP Address:Username:Password:Service Name:Reconnection Mode:Maximum Idle Time: MTU:IPv6 DNS Settings:Primary/Secondary DNS Address:
61D-Link DIR-868L User ManualSection 3 - CongurationEnable DHCP-D:LAN IPv6 Address:LAN Link-Local Address:Enable Automatic IPv6 AddressAssignment:Enable Automatic DHCP-PD in LAN:Autoconguration Type:IPv6 Address Lifetime:Check this box to enable DHCP prex delegation for each LAN on the network.Enter the LAN (local) IPv6 address for the router. Displays the router’s LAN Link-Local Address.Check to enable the Automatic IPv6 Address Assignment feature.Check this box to enable automatica conguration of the DHCP prex delegation for each LAN on the network.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6.Enter the IPv6 Address Lifetime (in minutes).
62D-Link DIR-868L User ManualSection 3 - CongurationIPv6 in IPv4 TunnelingSelect IPv6 in IPv4 Tunnel from the drop-down menu.Enter the IPv4 remote address you will use.Enter the IPv6 remote address you will use.Enter the IPv4 local address you will use.Enter the IPv6 local address you will use.Select either Obtain DNS server address automatically or Use the following DNS Address.Enter the primary and secondary DNS server addresses.Check this box to enable DHCP prex delegation for each LAN.Enter the LAN (local) IPv6 address for the router. Displays the router’s LAN Link-Local Address.My IPv6 Connection Is:Remote IPv4 Address:Remote IPv6 Address:Local IPv4 Address:Local IPv6 Address:IPv6 DNS Settings:Primary/Secondary DNS Address:Enable DHCP-D:LAN IPv6 Address:LAN IPv6 Lin-Local Address:
63D-Link DIR-868L User ManualSection 3 - CongurationEnable Automatic IPv6 AddressAssignment:Enable Automatic DHCP-PD in LAN:Autoconguration Type:Router Advertisement Lifetime:Check to enable the Automatic IPv6 Address Assignment feature.Check this box to enable automatic conguration of the DHCP prex delegation for each LAN on the network.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the Router Advertisement Lifetime (in minutes).
64D-Link DIR-868L User ManualSection 3 - Conguration6to4Select 6to4 from the drop-down menu.Enter the IPv6 settings supplied by your ISP. Enter the IPv6 relay supplied by your ISP. Enter the primary and secondary DNS server addresses. Enter the LAN (local) IPv6 address for the router. Displays the Router’s LAN Link-Local Address.Check to enable the Automatic IPv6 Address Assignment feature.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the IPv6 Address Lifetime (in minutes).My IPv6 Connection Is:6to4 Address:6to4 Relay:Primary/Secondary DNS Address:LAN IPv6 Address:LAN Link-Local Address:Enable Automatic IPv6 AddressAssignment:Autoconguration Type:Router Advertisement Lifetime:
65D-Link DIR-868L User ManualSection 3 - Conguration6rdSelect 6rd from the drop-down menu.Check this box if you want to minimize the number of routes to the destination by using a hub and spoke method of networking.Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Conguration to enter the settings yourself.Enter the 6rd IPv6 prex settings supplied by your ISP. You IPv4 address will appear here.Enter the desired IPv4 mask length.When an IPv6 prex is assigned, it will appear here.Enter the 6rd Border Relay IPv4 address settings supplied by your ISP. Enter the primary and secondary DNS server addresses.Enter the LAN (local) IPv6 address for the router. Displays the Router’s LAN Link-Local Address.My IPv6 Connection Is:Enable Hub and Spoke Mode:6rd Conguration:6rd IPv6 Prex:IPv4 Address:Mask Length:Assigned IPv6 Prex:6rd Border Relay IPv4 Address:Primary/Secondary DNS Address:LAN IPv6 Address:LAN Link-Local Address:
66D-Link DIR-868L User ManualSection 3 - CongurationEnable Automatic IPv6 AddressAssignment:Autoconguration Type:Router Advertisement Lifetime:Check to enable the Automatic IPv6 Address Assignment feature.Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the IPv6 Address Lifetime (in minutes).
67D-Link DIR-868L User ManualSection 3 - CongurationSelect Link-Local Only from the drop-down menu.Displays the IPv6 address of the router.My IPv6 Connection Is:LAN IPv6 Address Settings:Link-Local Connectivity
68D-Link DIR-868L User ManualSection 3 - Congurationmydlink SettingsDisplays whether your device is registered with a mydlink account or not.Displays the email address associated with your mydlink account if you have an active account.Click to go to the mydlink website to register your device or edit your settings.mydlink Service:mydlink E-mail:Register mydlink Service:Devices that are mydlink-enabled can be accessed and managed through the mydlink website and by using mydlink mobile apps for iOS and Android. You cannot take advantage of these features without a mydlink account. If you have a mydlink account already, you can log in when you rst set up the router, or by visitng this setup page.
69D-Link DIR-868L User ManualSection 3 - CongurationThis page will allow you to open a single port. If you would like to open a range of ports, refer to the next page.Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), your computer will be listed in the “Computer Name” drop-down menu.Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is seen from the Internet side, and the private port is used by the application on the computer within your local network.Select TCP, UDP, or Both from the drop-down menu.The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Select Allow All (most common) or a created Inbound lter. You may create your own inbound lters in the Advanced > Inbound Filter page.Name:IP Address:Private Port/Public Port:Protocol:Schedule:Inbound Filter:Virtual ServerAdvanced
70D-Link DIR-868L User ManualSection 3 - CongurationThis page will allow you to open a single port or a range of ports.Port ForwardingEnter a name for the rule or select an application from the drop-down menu. Select an application and click to populate the elds.Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the “Computer Name” drop-down menu. Select your computer and click <<. Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common. Example: 24,1009,3000-4000The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Select Allow All (most common) or a created Inbound lter. You may create your own inbound lters in the Advanced > Inbound Filter page.Name:IP Address:TCP/UDP:Schedule:Inbound Filter:
71D-Link DIR-868L User ManualSection 3 - CongurationEnter a name for the rule. You may select a pre-dened application from the drop-down menu and click.This is the port used to trigger the application. It can be either a single port or a range of ports.Select the protocol of the trigger port (TCP, UDP, or Both).This is the port number on the Internet side that will be used to access the application. You may dene a single port or a range of ports. You can use a comma to add multiple ports or port ranges.Select the protocol of the rewall port (TCP, UDP, or Both).The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.Name:Trigger:Trac Type:Firewall:Trac Type:Schedule:Application RulesSome applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have diculties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-868L. If you need to run applications that require multiple connections, specify the port normally associated with an application in the “Trigger Port” eld, select the protocol type as TCP or UDP, then enter the rewall (public) ports associated with the trigger port to open them for inbound trac.
72D-Link DIR-868L User ManualSection 3 - CongurationQoS EngineThis option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection.This displays the detected uplink speed.The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISP’s often speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as speedtest.net.A QoS Engine Rule identies a specic message ow and assigns a priority to that ow. For most applications, automatic classication will be adequate, and specic QoS Engine Rules will not be required.The QoS Engine supports overlaps between rules, where more than one rule can match for a specic message ow. If more than one rule is found to match the rule with the highest priority will be used.Create a name for the rule that is meaningful to you.The priority of the message ow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent).Enable QoS Engine:Automatic Uplink Speed:Measured Uplink Speed:Manual Uplink Speed:QoS Engine Rules:Name:Priority:The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classied automatically.
73D-Link DIR-868L User ManualSection 3 - CongurationThe protocol used by the messages.The rule applies to a ow of messages whose LAN-side IP address falls within the range set here.The rule applies to a ow of messages whose LAN-side port number is within the range set here.The rule applies to a ow of messages whose WAN-side IP address falls within the range set here.The rule applies to a ow of messages whose WAN-side port number is within the range set here.Protocol:Local IP Range:Local Port Range:Remote IP Range:Remote Port Range:
74D-Link DIR-868L User ManualSection 3 - CongurationNetwork FiltersSelect Turn MAC Filtering O, Allow MAC addresses listed below, or Deny MAC addresses listed below from the drop-down menu. Enter the MAC address you would like to lter.To nd the MAC address on a computer, please refer to the Networking Basics section in this manual. Select a DHCP client from the drop-down menu and click << to copy that MAC Address. Click to remove the MAC address.Congure MAC Filtering:MAC Address:DHCP Client:Clear:Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router.
75D-Link DIR-868L User ManualSection 3 - CongurationAccess ControlClick the Add Policy button to start the Access Control Wizard. Add Policy:The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games.Click Next to continue with the wizard.Access Control Wizard
76D-Link DIR-868L User ManualSection 3 - CongurationEnter a name for the policy and then click Next to continue.Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue.Enter the following information and then click Next to continue.• Address Type - Select IP address, MAC address, or Other Machines.• IP Address - Enter the IP address of the computer you want to apply the rule to.• Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00).Select the ltering method and then click Next to continue.

Navigation menu