D Link IR817LWA1 Wireless AC750 Dual Band Cloud Router User Manual 2

D Link Corporation Wireless AC750 Dual Band Cloud Router 2

Contents

User Manual_2

101D-Link DIR-817LW User ManualSection 3 - CongurationWi-Fi Protected Setup (WPS)Enable the Wi-Fi Protected Setup (WPS) feature. Note: if this option is unchecked, the WPS button on the side of the router will be disabled.Displays the current WPS status.Locking the WPS-PIN Method prevents the settings from being changed by any external registrar using its PIN. Devices can still be added to the wireless network using the Wi-Fi Protected Setup Push Button Conguration (WPS-PBC). It is still possible to change wireless networks settings with Manual Wireless Network Setup or Wireless Network Setup Wizard.Displays the current PIN. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Click to restore the default PIN of the router. Create a random number that is a valid PIN. This becomes the router’s PIN. You can then copy this PIN to the user interface of the wireless client.Enable:WiFi Protected Sutup:Lock WPS-PIN Setup:PIN:Reset PIN to Default:Generate New PIN:Wi-Fi Protected Setup (WPS) is a simplied method for securing your wireless network during the Initial Setup as well as the Add New Device processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufactures. The process is as simple as pressing a button for the Push-Button Method or correctly entering the eight-digit code for the PIN Code Method. The ease of use is benecial, while the highest wireless security setting of WPA2 is automatically used.
102D-Link DIR-817LW User ManualSection 3 - CongurationThe WPS Wizard helps you add wireless devices to the wireless network.The wizard will prompt you to select a conguration method. It will guide you through manual conguration, or allow you to choose between the Push Button (PBC) and PIN methods . If the device supports Wi-Fi Protected Setup and has a WPS button, you can add it to the network by pressing the WPS button on the device and then the on the router within 60 seconds.Click to start the wizard and skip to “Add Wireless Device with WPS Wizard” on page 40.Add Wireless Station:Connect Your Wireless Device:You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to “Connect a Wireless Client to your Router” on page 126 for more information.WPS ButtonWPS Button
103D-Link DIR-817LW User ManualSection 3 - CongurationTo use the Universal Plug and Play (UPnP™) feature check the box. UPnP provides compatibility with networking equipment, software and peripherals.Checking this box will allow the DIR-817LW to respond to pings. Unchecking the box may provide some extra security from hackers.You may set the port speed of the Internet port to 10Mbps, 100Mbps, or Auto 10/100Mbps (recommended). Check the box to allow multicast trac to pass through the router from the Internet (IPv4).Check the box to allow multicast trac to pass through the router from the Internet (IPv6).Enable UPnP IGD:Enable WAN Ping Response:WAN Port Speed:Enable Multicast Streams:Enable IPV6 Multicast Streams:Advanced Network Settings
104D-Link DIR-817LW User ManualSection 3 - CongurationGuest ZoneCheck the box to allow network connectivity between the dierent zones created.Check the box to enable the Guest Zone feature. The times when the Guest Zone will be active. The schedule may be set to Always, which will allow the service to always be enabled. You can create your own schedule in the Tools > Schedules section or click New Schedule.Enter a Wireless Network Name (SSID) that is dierent from your main wireless network. Select the type of security you would like to enable for the Guest Zone, or click None.Enable Routing Between Zones:Enable Guest Zone:Schedule:Wireless Network Name:Security Mode:The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may congure dierent zones for the 2.4GHz and 5GHz wireless bands.
105D-Link DIR-817LW User ManualSection 3 - CongurationIPv6 FirewallThe DIR-817LW’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device. The IPv6 Firewall functions in a similar way to the IP Filters feature.Check the box to enable the IPv6 rewall simple security.Select an action from the drop-down menu.Enter a Name to identify the IPv6 rewall rule.Use the drop-down menu to select the time schedule for enabling the IPv6 Firewall Rule. The schedule may be set to Always, which will allow this service to always be enabled. You can create your own schedule in the Tools > Schedules section. Use the Interface drop-down menu to specify the interface that connects to the source IPv6 addresses of the rewall rule. Enter the source IPv6 address range in the adjacent IP Address Range eld.Select the protocol of the rewall port (All, TCP, UDP, or ICMP).Use the Interface drop-down menu to specify the interface that connects to the destination IP addresses of the rewall rule. Enter the destination IPv6 address range in the adjacent IP Address Range eld.Enter the rst port of the range that will be used for the rewall rule in the rst box and enter the last port in the eld in the second box.Enable IPv6 Simple Security:Congure IPv6 Filtering below:Name:Schedule:Source:IP Address Range: Protocol:Dest:IP Address Range:Port Range:
106D-Link DIR-817LW User ManualSection 3 - CongurationIPv6 RoutingCheck the box next to the route you wish to enable. Enter a specic Name to identify this route.This is the IP address of the router used to reach the specied destination or enter the IPv6 address prex length of the packets that will take this route. Enter the Metric value for this rule here.Use the drop-down menu to specify if the IP packet must use the WAN or LAN interface to transit out of the Router.Enter the next hop that will be taken if this route is used.Route List:Name:Destination IPv6/Prex Length:Metric:Interface:Gateway:This page allows you to specify custom routes that determine how data is moved around your network.
107D-Link DIR-817LW User ManualSection 3 - CongurationAdminThis page will allow you to change the Administrator password and also enable Remote Management. ToolsEnter a new Password for the Administrator login name. Enter again to verify the password. Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router’s network settings.Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter https://192.168.0.1 (for example) instead of http://192.168.0.1. Remote management allows the DIR-817LW to be congured from the Internet by a web browser. A username/password is still required to access the Web Management interface. The port number used to access the DIR-817LW is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-817LW and 8080 is the port used for the Web Management interface.If you enabled the HTTPS Server, you must enter https:// as part of the URL to access the router remotely.Select Allow All or Deny All from the drop-down menu.This eld will display the current remote admin lter.Admin Password:Enable Graphical Authentication:Enable HTTPS Server:Enable Remote Management:Remote Admin Port:Remote Admin Inbound Filter:Details:
108D-Link DIR-817LW User ManualSection 3 - CongurationTimeDisplays the current date and time of the router.Select your Time Zone from the drop-down menu.Check the box to enable manual entry of daylight saving time. When daylight saving manual entry is enabled, the oset value is one hour by default.Enter a start date, an end date, including day of the week, and time for daylight saving time.This option is strongly recommended. Check the box to have the router connect to an NTP server on the Internet (not a local server). Select an NTP server from the drop-down menu and click Update Now.To manually input the time, enter the values in these elds for the Year, Month, Day, Hour, Minute, and Second. You can also click Sync. Your Computer’s Time Settings to synch the date and time with the computer you are currently on.Click Save Settings. Time:Time Zone:Enable Daylight Saving:Daylight Saving Oset:Daylight Saving Dates:Automatically Synchronize with D-Link’s Internet Time Server:NTP Server Used:Set the Time and Date Manually:The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. You have the option of using NTP, which is short for Network Time Protocol. An NTP server will sync the time and date with your router. Daylight Saving can also be congured to automatically adjust the time when needed.
109D-Link DIR-817LW User ManualSection 3 - CongurationSysLogThe DIR-817LW keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network.Enable Logging to SysLog Server:Check this box to enable sending the router logs to a SysLog Server. You will see a new eld for the SysLog Server IP Address.Enter the address of the SysLog server that will be used for sending the logs to. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP).SysLog Server IP Address:
110D-Link DIR-817LW User ManualSection 3 - CongurationEmail SettingsThe Email feature can be used to send the system log les, router alert messages, and rmware update notication to your email address. Enable Email Notication: From Email Address:To Email Address:SMTP Server Address:SMTP Server Port:Enable Authentication:Account Name:Password:On Log Full:On Schedule:Schedule:Details:When this option is enabled, router activity logs are emailed to a designated email address.Enter the Email Address you would like to display as the sender when you receive a log le or rmware upgrade notication via email.Enter the Email Address where you want the email to be sent. Enter the SMTP Server Address for sending email. Enter the SMTP port used on the server.Check this box if your SMTP server requires authentication. Enter your Account Name for sending email.Enter the Password associated with the account. Re-type the password associated with the account.When this box is checked, logs will be sent via email to your account when the log is full.When this box is checked, logs will be sent via email according to schedule.This option is enabled when On Schedule is selected. You can select a schedule from the list of dened schedules. To create a schedule, go to Tools > Schedules.Detail will display the selected schedule.
111D-Link DIR-817LW User ManualSection 3 - CongurationUse this option to save the current router conguration settings to a le on the hard disk of the computer you are using. First, click the Save Conguration button. A le dialog will appear, allowing you to select a location and le name for the settings. Use this option to load previously saved router conguration settings. First, click on Browse to nd a previously saved le of conguration settings. Then, click the Restore Conguration from File button to transfer those settings to the router. This option will restore all conguration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save Conguration button above. Click to reboot the router.Click Clear to remove any installed Language Packs.Save Settings to Local Hard Drive:Load Settings from Local Hard Drive:Restore to Factory Default Settings:Reboot the Device:Clear Language Pack:SystemThis section allows you to manage the router’s conguration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.
112D-Link DIR-817LW User ManualSection 3 - CongurationFirmwareBrowse:Upload:After you have downloaded the new rmware, click Browse to locate the rmware update on your hard drive. Once you have located the le on your computer, click the Upload button to start the rmware upgrade. From here you can check to see if there is an upgrade available, and then you can download the latest rmware for your router. Make sure you download the rmware you want to use onto the local hard drive of your computer. After you have downloaded the new language pack, click Browse to locate the language pack le on your hard drive. Once you have located the le on your computer, click the Upload button to start the language pack upgrade. Language Pack UpgradeYou can change the language of the web UI by uploading available language packs.Browse:Upload:Firmware Upgrade
113D-Link DIR-817LW User ManualSection 3 - CongurationDynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to Enable DDNS.Select your DDNS provider from the drop-down menu or enter the DDNS Server Address.Enter the Host Name that you registered with your DDNS service provider.Enter the Username or Key for your DDNS account.Enter the Password or Key for your DDNS account.Enter a Timeout time (in hours).Displays the current connection status.Enable Dynamic DNS:Server Address:Host Name:Username or Key:Password or Key:Timeout:Status:Dynamic DNSThe Dynamic DNS (DDNS) feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.
114D-Link DIR-817LW User ManualSection 3 - CongurationEnable:IPv6 Address:Check the box to Enable DDNS for IPv6 Hosts.Enter the IPv6 Address of your computer/server in your local network. You can select a computer/server from the drop-down list and click the << button.DDNS for IPv6 HostsHost Name:IPv6 Dynamic DNS List:Enable:Host Name:IPv6 Address:Edit/Delete:Enter the IPv6 Host Name that you registered with your DDNS service provider. Click Save.Once you save your entry, the IPv6 DDNS host information will be displayed here. Check to Enable the entry.Displays the name of your IPv6 DDNS host.Displays the IPv6 Address of your computer/server associated with the IPv6 DDNS host.Click the Edit icon to make changes to the entry or click the trash icon to delete the entry.
115D-Link DIR-817LW User ManualSection 3 - CongurationThe Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping and click Ping.Enter the IPv6 Address that you wish to Ping and click Ping.The results of your ping attempts will be displayed here.System CheckHost Name or IP Address:Host Name or IPv6 Address:Ping Result:
116D-Link DIR-817LW User ManualSection 3 - CongurationEnter a Name for your new schedule.Click on All Week to include every day of the week, or click Select Day(s) and check the boxes to select the days to enforce the rules.Check All Day - 24 hrs or select a Time Format from the drop-down list and enter a Start Time and End Time for your schedule. Click Add to add a schedule to the list.The list of schedules will be listed here. Click the Edit icon to make changes or click the trash icon to delete the schedule.Name:Day(s):Time:Schedule Rules List:SchedulesSchedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3 pm to 8 pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3 pm and End Time of 8 pm.
117D-Link DIR-817LW User ManualSection 3 - CongurationThis page displays the current information for the DIR-817LW. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.Displays the router’s Time, Firmware Version, and registration status.Displays the Connection Type, MAC Address, and the public IP settings.Displays the MAC Address and the private (local) IP settings for the router.Displays the 2.4GHz wireless MAC Address and your wireless settings such as Channel and Network Name (SSID).Displays the 5GHz wireless MAC Address and your wireless settings such as Channel and Network Name (SSID).Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP).Displays IPv4 and IPv6 multicast group addresses.General:WAN:LAN:Wireless LAN:Wireless LAN2:LAN Computers:IGMP Multicast Memberships:Device InfoStatus
118D-Link DIR-817LW User ManualSection 3 - CongurationLogsSave Log File:Log Type & Level:First Page:Last Page:Previous:Next:Clear:Link to Email Log Settings:Click Save to Save Log File to Local Hard Drive.Select the type of event you would like to be logged from Log Type and Log Level.Click to go to the First Page of the Log Files.Click to go to the Last Page.Click to go back one page.Click to go to the Next page.Click to Clear all of the log contents.This option will send copy of the router log to your email address congured in the Tools > Email Settings page.The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. You can dene what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log les to a computer on your network that is running a Syslog utility.
119D-Link DIR-817LW User ManualSection 3 - CongurationStatisticsThe screen below displays the Trac Statistics. You can view the number of packets that pass through the DIR-817LW on the WAN ports, LAN ports, and the Wi-Fi® segments. The trac counter will reset if the device is rebooted.
120D-Link DIR-817LW User ManualSection 3 - CongurationInternet SessionsThe Internet Sessions page displays the details of active Internet sessions passing through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer.
121D-Link DIR-817LW User ManualSection 3 - CongurationThe Connected Wireless Client List displays a list of wireless clients currently connected to the router. This table also displays the MAC address, IP Address and connection Rate of the connected wireless clients.Wireless
122D-Link DIR-817LW User ManualSection 3 - CongurationRoutingThis page will display your current Routing Table.
123D-Link DIR-817LW User ManualSection 3 - CongurationIPv6The IPv6 page displays a summary of the Router’s IPv6 settings and lists the IPv6 address and host name of any IPv6 clients.
124D-Link DIR-817LW User ManualSection 3 - CongurationIPV6 RoutingThis page displays the IPV6 routing details congured for your router.
125D-Link DIR-817LW User ManualSection 3 - CongurationSupport
126D-Link DIR-817LW User ManualSection 4 - SecurityConnect a Wireless Client to your RouterWPS ButtonStep 2 - Within two minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process).The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-817LW router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:Step 1 - Press the WPS button on the side of the DIR-817LW for about one second. The Power LED on the front will start to blink.Step 3 - Allow up to one minute to congure. Once the Power LED stops blinking, you will be connected and your wireless connection will be secure with WPA2.WPS Button
127D-Link DIR-817LW User ManualSection 4 - SecurityWindows® 81. Click on the wireless computer icon in your system tray (lower-right corner next to the time). 2. A list of available wireless networks will appear. 3. Click the wireless network (SSID) you want to connect to and then click Connect.4. If the network is secure/encrypted, enter the Wi-Fi password (security key) and click Next.
128D-Link DIR-817LW User ManualSection 4 - SecurityIf you get a good signal but cannot access the Internet, conrm the encryption by reviewing the prole or check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.5. Click either to enable or disable le sharing.6. You will now be connected to your wireless network.
129D-Link DIR-817LW User ManualSection 4 - SecurityWindows® 7It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.1. Click on the wireless icon in your system tray (lower-right corner).2. The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2
130D-Link DIR-817LW User ManualSection 4 - Security3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.4. The following window appears while your computer tries to connect to the router.
131D-Link DIR-817LW User ManualSection 4 - Security5. Enter the same security key or passphrase that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
132D-Link DIR-817LW User ManualSection 4 - SecurityWPSThe WPS feature of the DIR-817LW can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to congure the WPS feature:1. Click the Start button and select Computer from the Start menu.2. Click Network on the left side.
133D-Link DIR-817LW User ManualSection 4 - Security3. Double-click the DIR-817LW.4. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.
134D-Link DIR-817LW User ManualSection 4 - Security5. Type a name to identify the network.6. To congure advanced settings, click the icon.Click Next to continue.
135D-Link DIR-817LW User ManualSection 4 - Security7. The following window appears while the Router is being congured. Wait for the conguration to complete.8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.9. Click Close to complete WPS setup.
136D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless NetworkWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
137D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless NetworkWPA/WPA2It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
138D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless Network3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
139D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless NetworkWPS/WCN 2.0The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista®. The following instructions for setting this up depends on whether you are using Windows Vista® to congure the router or third party software. When you rst set up the router, Wi-Fi protection is disabled and uncongured. To enjoy the benets of Wi-Fi protection, the router must be both enabled and congured. There are three basic methods to accomplish this: use Windows Vista’s built-in support for WCN 2.0, use software provided by a third party, or manually congure. If you are running Windows Vista®, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are nished, proceed to the next section to set up the newly-congured router.
140D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless NetworkWindows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
141D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless NetworkIt is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. WPA/WPA2
142D-Link DIR-817LW User ManualSection 5 - Connecting to a Wireless Network3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router.
143D-Link DIR-817LW User ManualSection 6 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-817LW. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screens on your computer will look similar to the following examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Internet Explorer® 7 and higher- Firefox- Chrome- Safari 4 and higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any Internet security software running on the computer. Software rewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
144D-Link DIR-817LW User ManualSection 6 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the bottom of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. To re-congure the router, refer to “Conguration” on page 13.Reset
145D-Link DIR-817LW User ManualSection 6 - Troubleshooting3. Why can’t I connect to certain sites or send and receive e-mails when connecting through my router? If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472
146D-Link DIR-817LW User ManualSection 6 - TroubleshootingYou should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web conguration page for the device. • Click on Setup and then click Manual Congure. • To change the MTU enter the number in the MTU eld and click Save Settings to save your settings. • Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
147D-Link DIR-817LW User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link.Wireless Basics
148D-Link DIR-817LW User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.How does wireless work? Wireless works similar to how cordless phones work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues.
149D-Link DIR-817LW User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Home • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Oce and Home Oce • Stay on top of everything at home as you would at oce • Remotely access your oce network from home • Share Internet connection and printer with multiple computers • No need to dedicate oce space
150D-Link DIR-817LW User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coee Shops, Libraries, Restaurants, and Convention Centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.
151D-Link DIR-817LW User ManualAppendix A - Wireless BasicsSecurity Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-817LW wireless network Cardbus adapters.An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate.Wireless Modes
152D-Link DIR-817LW User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressWindows® XP Users• Click on Start > Run. In the run box type cmd and click OK.• At the prompt, type ipcong and press Enter.• This will display the IP address, subnet mask, and the default gateway of your adapter.Windows® 7/Vista® Users• Click Start, type cmd in the search box and then click OK.• At the prompt, type ipcong and press Enter.• This will display the IP address, subnet mask, and default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.Windows® 8 Users• Press the Windows key and R together. Type cmd in the box and click OK.• At the prompt, type ipcong and press Enter.• This will display the IP address, subnet mask, and default gateway of your adapter.After you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e., router) automatically. To verify your IP address, please follow the steps below.
153D-Link DIR-817LW User ManualAppendix B - Networking BasicsWindows® 8 Users• Press the Windows key and then type IP. Click Settings on the right side and then click View Network Connections. • Right-click on the adapter which represents your D-Link wireless network adapter.• Highlight Internet Protocol Version 4 (TCP /IPv4) and click Properties.• Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router or network. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. • Set Default Gateway the same as the LAN IP address of your router or gateway.• Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP).• Click OK to save your settings.Statically Assign an IP AddressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
154D-Link DIR-817LW User ManualAppendix B - Networking BasicsWindows® 7/ Vista® Users• Click on Start > Control Panel (make sure you are in Classic View). Double-click on the Network and Sharing Center icon. If you are using Windows Vista, click on Manage network connections along the left panel in the window. For Windows® 7, click on Change adapter settings.• Right-click on the Local Area Connection which represents your D-Link wireless network adapter which will be connected to your network.• Highlight Internet Protocol Version 4 (TCP /IPv4) and click Properties.• Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router or network. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. • Set Default Gateway the same as the LAN IP address of your router or gateway.• Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP).• Click OK to save your settings.
155D-Link DIR-817LW User ManualAppendix B - Networking BasicsWindows® XP Users• Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections icon. • Right-click on the Local Area Connection which represents your D-Link wireless network adapter (or other adapter) which will be connected to your router.• Highlight Internet Protocol (TCP/IP) and click Properties.• Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. • Set Default Gateway the same as the LAN IP address of your router or gateway.• Set Primary DNS as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP).• Click OK to save your settings.
156D-Link DIR-817LW User ManualAppendix C - Technical SpecicationsTechnical Specications1 Maximum wireless signal rate derived from IEEE Standard 802.11ac (draft), 802.11a, 802.11g, and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.2 Frequency Range varies depending on country’s regulationStandards• IEEE 802.11ac (draft)• IEEE 802.11n• IEEE 802.11g• IEEE 802.11aPhysical Interface• Four 10/100 Fast Ethernet LAN Ports• 10/100 Fast Ethernet WAN Port• 1 WPS Push Button• Reset ButtonSecurity• Wi-Fi Protected Access (WPA/WPA2)• WPS™LEDs• Power/WPS• InternetPower• DC 12V/1.0AOperating Temperature• 32º to 104º F (0º to 40º C)Operating Humidity• 10% to 90% non-condensingCertications• CE• FCC• IC• C-Tick• CSA internationalDimensions• 5.97” x 4.41” x 1.2” (151.6mm x 112mm x 30.5mm)Weight• 0.45 lb (204 g)Warranty• 1-Year Limited Warranty
157D-Link DIR-817LW User ManualAppendix D - Contacting Technical SupportContacting Technical SupportU.S. and Canadian customers can contact D-Link technical support through our web site or by phone.Before you contact technical support, please have the following ready: • Model number of the product (e.g. DIR-817LW) • Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can nd software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.For customers within the United States: Phone Support:(877) 453-5465Internet Support:http://support.dlink.com For customers within Canada: Phone Support:(800) 361-5265Internet Support:http://support.dlink.ca
158D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseGPL Code StatementThis D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:http://tsd.dlink.com.tw/GPL.aspThe GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.WRITTEN OFFER FOR GPL AND LGPL SOURCE CODEWhere such specic license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:Email: GPLCODE@DLink.comSnail Mail:Attn: GPLSOURCE REQUESTD-Link Systems, Inc.17595 Mt. Herrmann StreetFountain Valley, CA 92708GNU GENERAL PUBLIC LICENSEVersion 3, 29 June 2007Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
159D-Link DIR-817LW User ManualAppendix E - GNU General Public LicensePreamble The GNU General Public License is a free, copyleft license for software and other kinds of works.The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.Developers that use the GNU GPL protect your rights with two steps:(1) assert copyright on the software, and (2) oer you this License giving you legal permission to copy, distribute and/or modify it.For the developers’ and authors’ protection, the GPL clearly explains that there is no warranty for this free software. For both users’ and authors’ sake, the GPL requires that modied versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions. Some devices are designed to deny users access to install or run modied versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users’ freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users.Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it eectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.The precise terms and conditions for copying, distribution and modication follow.
160D-Link DIR-817LW User ManualAppendix E - GNU General Public License TERMS AND CONDITIONS0. Denitions.“This License” refers to version 3 of the GNU General Public License.“Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.“The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modied version” of the earlier work or a work “based on” the earlier work.A “covered work” means either the unmodied Program or a work based on the Program.To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modication), making available to the public, and in some countries other activities as well.To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.1. Source Code.The “source code” for a work means the preferred form of the work for making modications to it. “Object code” means any non-source form of a work.A “Standard Interface” means an interface that either is an ocial standard dened by a recognized standards body, or, in the case of interfaces specied for a particular programming language, one that is widely used among developers working in that language.
161D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseThe “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specic operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work’s System Libraries, or general-purpose tools or generally available free programs which are used unmodied in performing those activities but which are not part of the work. For example, Corresponding Source includes interface denition les associated with source les for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specically designed to require, such as by intimate data communication or control ow between those subprograms and other parts of the work.The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.The Corresponding Source for a work in source code form is that same work.2. Basic Permissions.All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly arms your unlimited permission to run the unmodied Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
162D-Link DIR-817LW User ManualAppendix E - GNU General Public License3. Protecting Users’ Legal Rights From Anti-Circumvention Law.No covered work shall be deemed part of an eective technological measure under any applicable law fullling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumventionis eected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modication of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures.4. Conveying Verbatim Copies.You may convey verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.You may charge any price or no price for each copy that you convey, and you may oer support or warranty protection for a fee.5. Conveying Modied Source Versions.You may convey a work based on the Program, or the modications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:a) The work must carry prominent notices stating that you modied it, and giving a relevant date.b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modies the requirement in section 4 to “keep intact all notices”.c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
163D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseA compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.6. Conveying Non-Source Forms.You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source xed on a durable physical medium customarily used for software interchange.b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written oer, valid for at least three years and valid for as long as you oer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.c) Convey individual copies of the object code with a copy of the written oer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an oer, in accord with subsection 6b.d) Convey the object code by oering access from a designated place (gratis or for a charge), and oer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a dierent server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to nd the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being oered to the general public at no charge under subsection 6d.A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
164D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseA “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only signicant mode of use of the product.“Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modied versions of a covered work in that User Product from a modied version of its Corresponding Source. The information must suce to ensure that the continued functioning of the modied object code is in no case prevented or interfered with solely because modication has been made.If you convey an object code work under this section in, or with, or specically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a xed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modied object code on the User Product (for example, the work has been installed in ROM).The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modied or installed by the recipient, or for the User Product in which it has been modied or installed. Access to a network may be denied when the modication itself materially and adversely aects the operation of the network or violates the rules and protocols for communication across the network.Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.
165D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseWhen you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work). You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:a) Disclaiming warranty or limiting liability dierently from the terms of sections 15 and 16 of this License; orb) Requiring preservation of specied reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; orc) Prohibiting misrepresentation of the origin of that material, or requiring that modied versions of such material be marked in reasonable ways as dierent from the original version; ord) Limiting the use for publicity purposes of names of licensors or authors of the material; ore) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; orf) Requiring indemnication of licensors and authors of that material by anyone who conveys the material (or modied versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.If you add terms to a covered work in accord with this section, you must place, in the relevant source les, a statement of the additional terms that apply to those les, or a notice indicating where to nd the applicable terms.Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.
166D-Link DIR-817LW User ManualAppendix E - GNU General Public License8. Termination.You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and nally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder noties you of the violation by some reasonable means, this is the rst time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.10. Automatic Licensing of Downstream Recipients.Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party’s predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable eorts.
167D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseYou may not impose any further restrictions on the exercise of the rights granted or armed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, oering for sale, or importing the Program or any portion of it.11. Patents.A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.A contributor’s “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modication of the contributor version. For purposes of this denition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor’s essential patent claims, to make, use, sell, oer for sale, import and otherwise run, modify and propagate the contents of its contributor version.In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benet of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient’s use of the covered work in a country, would infringe one or more identiable patents in that country that you have reason to believe are valid.If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specic copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
168D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseA patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specic products or compilations that contain the covered work, unless you entered into that arrangement,or that patent license was granted, prior to 28 March 2007.Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.12. No Surrender of Others’ Freedom.If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.13. Use with the GNU Aero General Public License.Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Aero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Aero General Public License, section 13, concerning interaction through a network will apply to the combination as such.14. Revised Versions of this License.The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may dier in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Program species that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation. If the Program species that a proxy can decide which future versions of the GNU General Public License can be used, that proxy’s public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
169D-Link DIR-817LW User ManualAppendix E - GNU General Public LicenseLater license versions may give you additional or dierent permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.15. Disclaimer of Warranty.THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.16. Limitation of Liability.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.17. Interpretation of Sections 15 and 16.If the disclaimer of warranty and limitation of liability provided above cannot be given local legal eect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
170D-Link DIR-817LW User ManualAppendix F - WarrantyWarrantySubject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and• Only for products purchased and delivered within the fty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.Limited Warranty:D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below (“Warranty Period”), except as otherwise stated herein.• Hardware (excluding power supplies and fans): One (1) year• Power supplies and fans: One (1) year• Spare parts and spare kits: Ninety (90) daysThe customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Oce. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.
171D-Link DIR-817LW User ManualAppendix F - WarrantyLimited Software Warranty:D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is rst returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.Non-Applicability of Warranty:The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.Submitting A Claim (USA): The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sucient detail to allow DLink to conrm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/.• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package
172D-Link DIR-817LW User ManualAppendix F - Warrantyto ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.Submitting A Claim (Canada): The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:• Customers need to provide their receipt (proof of purchase) even if the product is registered. Without a receipt, no warranty service will be done. The registration is not considered a proof of purchase.• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sucient detail to allow D-Link to conrm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.• The customer must obtain a Case ID Number from D-Link Technical Support at 1-800-361-5265, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.ca/.• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will
173D-Link DIR-817LW User ManualAppendix F - Warrantybe rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., 2525 Meadowvale Boulevard Mississauga, Ontario, L5N 5S2 Canada. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.• RMA phone number: 1-800-361-5265 Hours of Operation: Monday-Friday, 9:00AM – 9:00PM ESTWhat Is Not Covered:The Limited Warranty provided herein by D-Link does not cover:Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, rmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Oce. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.Disclaimer of Other Warranties:EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.Limitation of Liability:
174D-Link DIR-817LW User ManualAppendix F - WarrantyTO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.Governing Law:This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specic legal rights and you may also have other rights which vary from state to state.Trademarks:D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.Copyright Statement:No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.Copyright ©2013 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.CE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
175D-Link DIR-817LW User ManualAppendix F - Warrantydesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.Operations in the 5.15-5.25GHz band are restricted to indoor usage only.IMPORTANT NOTICE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting.If this device is going to be operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor environment only. This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.The availability of some specic channels and/or operational frequency bands are country dependent and are rmware programmed at the factory to match the intended destination. The rmware setting is not accessible by the end user.
176D-Link DIR-817LW User ManualAppendix F - WarrantyICC Notice: Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. IMPORTANT NOTE:IC Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.(i) The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems;(ii) The maximum antenna gain (3.3dBi) permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specied for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3).Règlement d’Industry Canada Les conditions de fonctionnement sont sujettes à deux conditions:(1) Ce périphérique ne doit pas causer d’interférence et.(2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de ce périphérique.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.Pour les produits disponibles aux États-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d’autres canaux n’est pas possible. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
177D-Link DIR-817LW User ManualAppendix G - RegistrationVersion 1.0December 27 2013Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.Registration

Navigation menu