D Link IR1360A1 AC1300 Mesh-Enabled Smart Wi-Fi Router User Manual

D-Link Corporation AC1300 Mesh-Enabled Smart Wi-Fi Router

User Manual

Version 1.00| 12/20/2018User ManualDIR-1360AC1300 Mesh-Enabled Smart Wi-Fi Router
iD-Link DIR-1360 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreTM is a service mark of Apple Inc.Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.Copyright © 2018 by D-Link Corporation, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.Power UsageThis device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned o through a power switch to save energy when it is not needed.Network Standby: 4.87 wattsSwitched O: 0.06 wattsPrefaceRevision Date Description1.00 December 20, 2018 Initial A1 release
iiD-Link DIR-1360 User ManualTable of ContentsTable of ContentsProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................ 4Hardware Overview ..................................................................... 5LED Indicators ........................................................................ 5Back Panel ............................................................................... 6Installation ......................................................................... 7Before you Begin ........................................................................... 7Wireless Installation Considerations ......................................8Hardware Setup ............................................................................ 9Completing Setup ......................................................................12Setup Wizard ........................................................................13D-Link Wi-Fi App .................................................................17Conguration ...................................................................19Home ..............................................................................................20Internet ................................................................................... 20DIR-1360.................................................................................21Connected Clients ..............................................................22Settings ..........................................................................................23Wizard .....................................................................................23Internet ................................................................................... 23IPv6 .....................................................................................33VLAN ...................................................................................53Wireless ..................................................................................54Guest Zone .......................................................................57Network .................................................................................. 58Features .......................................................................................... 60QoS Engine............................................................................60Firewall ...................................................................................61IPv4/IPv6 Rules ...............................................................63Port Forwarding ..................................................................64Virtual Server ...................................................................65Website Filter ........................................................................ 66Static Routes .........................................................................67IPv6 .....................................................................................68Dynamic DNS .......................................................................69IPv6 Host ...........................................................................70Management ........................................................................71Time & Schedule .................................................................71Time ....................................................................................71Schedule ...........................................................................72System Log ............................................................................73System Admin ......................................................................75System ...............................................................................76Upgrade .................................................................................77Statistics .................................................................................78Connect a Wireless Client to your Router ......................79WPS Button ...................................................................................79Windows® 10 ................................................................................80
iiiD-Link DIR-1360 User ManualTable of ContentsWindows® 8 ................................................................................... 82WPA/WPA2 ............................................................................82Windows® 7 ................................................................................... 84WPA/WPA2 ............................................................................84WPS ..........................................................................................87Windows Vista® ............................................................................ 91WPA/WPA2 ............................................................................92Troubleshooting ..............................................................94Wireless Basics .................................................................98What is Wireless? .........................................................................99Tips ................................................................................................ 101Wireless Modes ......................................................................... 102Networking Basics .........................................................103Check your IP address ............................................................ 103Wireless Security ......................................................... 104What is WPA? ................................................................ 104Technical Specications ................................................105Regulatory Information ................................................106
1D-Link DIR-1360 User ManualSection 1 - Product OverviewProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DIR-1360 will cause damage and void the warranty for this product.If any of the above items are missing or damaged, please contact your local reseller.DIR-1360 Ethernet CablePower AdapterQuick Installation Document
2D-Link DIR-1360 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based cable or DSL modem• IEEE 802.11ac/n/g/b/a wireless clients• 10/100/1000 EthernetWeb-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 10 or higher• Firefox 28 or higher• Safari 6 or higher• Chrome 28 or higherWindows® Users: Make sure you have Javascript enabled.Wi-Fi App Requirements• iPhone®/iPad® Android™ smartphone or tablet. (Please refer to the mobile app's store page to check whether your device is compatible)System Requirements
3D-Link DIR-1360 User ManualSection 1 - Product OverviewIntroductionThe D-Link DIR-1360 AC1300 Mesh-Enabled Smart Wi-Fi Router shares your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 1300 Mbps (Up to 867 Mbps on the 5 GHz Wireless AC band and up to 400 Mbps on the 2.4 GHz Wireless N band)1 by using advanced AC beamforming technology to signicantly outperform 802.11n and other 802.11ac devices. Equipped with a Gigabit WAN/Internet port and four Gigabit LAN ports to provide wired speeds of up to 10 times faster than standard 10/100 ports, the DIR-1360 lets you experience networking at its best – no matter if you're using wireless or wired Ethernet.Featuring four antennas and a 2x2 + 2x2 Multiple In Multiple Out (MIMO) hardware and software conguration, the DIR-1360 oers better data rates, fewer dead-spots, more coverage, and better reliability. Operating exclusively in the 5 GHz band, the DIR-1360's 802.11ac wireless connections bypasses the crowded 2.4 GHz band, giving you faster speeds while still maintaining backward compatibility with older 802.11n/g/b devices through the 2.4 GHz band. A stronger Wi-Fi signal means you can install more wireless surveillance cameras, baby monitors, sensors, and alarms in the places where you need them. Add these features together, and the DIR-1360 lets you expand your Smart Home by bringing Wi-Fi to places your old signal can’t reach.The DIR-1360's Smart Connect technology makes connecting to wireless networks easy automating multiple networks. Since the introduction of 5 GHz multi-band wireless technology, choosing between 5 GHz or 2.4 GHz networks to optimize range and speed involved guesswork. Smart Connect eliminates the guesswork by unifying both bands into a single network name. Behind the scenes, when a connection is initiated, the DIR-1360's advanced algorithms determine the best band for your device and automatically distributes each device to its optimal band – providing a faster, more reliable, and hassle-free experience for all users.1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate.
4D-Link DIR-1360 User ManualSection 1 - Product Overview• Superior Wireless Networking - The DIR-1360 provides Gigabit wireless speeds of up to a combined 1300 Mbps (867 Mbps 802.11ac 5 GHz, plus 400 Mbps 802.11n 2.4 GHz)1. These speeds rival wired connections and allow users enjoy online activities such as HD video communication, online gaming, and Voice over IP telephony lag-free from anywhere in your home while still oering full 802.11n/g/b backward compatibility.• Extreme Wired LAN and WAN Networking - With four 10/100/1000 Gigabit Ethernet LAN ports, and a 10/100/1000 Gigabit Ethernet WAN port, the DIR-1360 has an enormous amount of bandwidth to take full advantage of the fastest broadband speeds available.• IPv6 Support - The DIR-1360 fully supports IPv6 and includes support for a variety of IPv6 connection types including: SLAAC/DHCPv6, 6to4, 6rd, Static IPv6, IPv6 PPPoE, IPv6 in IPv4 tunneling, and local connectivity.• Smart Connect - Creates a single wireless SSID for your devices. Behind the scenes, the DIR-1360 automatically determines whether to connect a device to the 2.4 or 5 GHz network, thereby providing the best speed and range for each device and optimally distributing devices to each network.• Advanced Firewall Features - The web-based user interface displays a number of advanced network management features. Easily apply content ltering based on MAC address, URL, and/or domain name. Schedule these lters to be active on certain days or for a duration of hours or minutes.• Encrypted Multiple/Concurrent Sessions - The DIR-1360 supports VPN passthroughs. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-1360 can access corporate networks through encrypted channels.• User-friendly Setup Wizard - Using its easy-to-use web-based user interface or D-Link Wi-Fi App, the DIR-1360 lets you quickly congure and secure your router to your specic settings in minutes. 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
5D-Link DIR-1360 User ManualSection 1 - Product OverviewHardware OverviewLED Indicators1 Power LED A solid blue light indicates a proper connection to the power supply. The light will be solid orange during boot up.2 Internet LED A solid blue light indicates a connection on the Internet port. If the LED is orange, the router cannot connect to the Internet.3 Wireless (2.4 GHz LED) A solid blue light indicates that the 2.4 GHz wireless band is enabled.4 Wireless (5 GHz LED) A solid blue light indicates that the 5 GHz wireless band is enabled.5 USB 3.0 Port Connect a USB storage device to share les over the network.12345
6D-Link DIR-1360 User ManualSection 1 - Product OverviewHardware OverviewBack Panel1 Reset Button Insert a paperclip in the hole to press the recessed button, hold for 10 seconds, and release to reset the router to default settings2 Gigabit LAN Ports (1- 4) Connect Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.3Gigabit WAN Port Using an Ethernet cable, connect your broadband modem to this port.4 WPS Button Press to start the WPS process and automatically create an encrypted connection to a WPS client.5 Power Connector Connect the supplied power adapter here.6 Power Button Press the power button to power the device on or o.4 5 6312
7D-Link DIR-1360 User ManualSection 3 - InstallationBefore you Begin• Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, attic, or garage. This is to allow proper ventilation and prevent overheating. • Congure the router with the computer that was last connected directly to your Internet connection. Verify that it is connected to the Internet before connecting additional devices.• If your Internet Service provider (ISP) provided you with a modem/router combo, you will need to set it to “bridge” mode so the router can work properly. Please contact your ISP or refer to the user manual for your modem/router device.• If connecting to a DSL modem, make sure to have your DSL service information provided by your Internet Service Provider handy. This information is likely to include your DSL account's Username and Password. Your ISP may also supply you with additional WAN conguration settings which might be necessary to establish a connection. • If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to label each cable or take a picture of your existing setup before making any changes. • If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet.This section will walk you through the installation of the DIR-1360. Installation
8D-Link DIR-1360 User ManualSection 3 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:• Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.• Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.• Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.• Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.• If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use.
9D-Link DIR-1360 User ManualSection 3 - Installation2. Position your DIR-1360 near your Internet-connected modem. Place it in an open area for better wireless coverage.1. The DIR-1360 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas into a 105-degree angle (middle notch) to provide optimal wireless coverage. Keep the router in an open area for better wireless coverage. 3. Turn o and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some cases, you may need to turn it o for up to ve minutes.ModemDIR-1360ModemHardware Setup105˚DIR-1360
10D-Link DIR-1360 User ManualSection 3 - InstallationDIR-1360DIR-1360DIR-13605. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.6. Connect the supplied power adapter to the router and a power outlet, press the power button, and wait approximately one minute until the LED indicator on the front of the device changes from orange to solid blue.Modem4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.ModemModem
11D-Link DIR-1360 User ManualSection 3 - InstallationDIR-1360DIR-1360 If you are conguring the DIR-1360 from a PC with a wired Ethernet connection, plug one end of an Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer.Quick Install CardModem7. If you are conguring the DIR-1360 wirelessly from a PC, connect to a Wi-Fi network printed on the included Wi-Fi Conguration Card. You can also nd the Wi-Fi network names and passwords printed on the label attached to the bottom your router.Modem8. If you are connecting to a broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and connecting to a website. If the website does not load, proceed to Setup Wizard on page 13.
12D-Link DIR-1360 User ManualSection 3 - InstallationCompleting SetupThere are dierent ways you can congure your router to connect to the Internet and connect to your clients:• D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time. Refer to Setup Wizard on page 13.• D-Link Wi-Fi App - Use your Android™ device, iPhone™ or IPad™ to congure your router. Refer to D-Link Wi-Fi App on page 17.• Manual Setup - Log in to the router and manually congure your router. Refer to Conguration on page 19.
13D-Link DIR-1360 User ManualSection 3 - InstallationThe wizard is designed to guide you through a step-by-step process to congure your new D-Link router and connect to the Internet.Click Next to continue. Setup WizardIf this is your rst time installing the router, open your web browser and enter http://dlinkrouter.local./ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed.Select your Internet connection type (this information can be obtained from your Internet Service Provider) and click Next to continue.
14D-Link DIR-1360 User ManualSection 3 - InstallationIf the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router.If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. Setup Wizard (continued)
15D-Link DIR-1360 User ManualSection 3 - InstallationCreate a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network.Click Next to continue.Note: The DIR-1360's Smart Connect feature presents a single wireless network. When connecting clients to an extension network, they will be automatically added to the best band, either 2.4 GHz or 5 GHz. To disable the Smart Connect feature and individually congure 2.4 GHz and 5 GHz networks, refer to Wireless on page 54.To help protect your router, please enter a new password. You will be prompted for this password every time you want to use the router’s web conguration utility. Click Next to continue.Setup Wizard (continued)
16D-Link DIR-1360 User ManualSection 3 - InstallationYou will be presented with a summary of your settings. Click Next to nalize the settings or Back to make changes.At the end of the wizard, you will be presented with a nal summary of your settings. Click Finish to close the wizard.Congratulations, your device has been successfully congured! Setup Wizard (continued)
17D-Link DIR-1360 User ManualSection 3 - InstallationD-Link Wi-Fi AppThe D-Link Wi-Fi App allows you to install and congure your DIR-1360 AC1300 Mesh-Enabled Smart Wi-Fi Router from your mobile device.Note: The screenshots may be dierent depending on your mobile device’s OS version. The following steps show the Android interface of the D-Link Wi-Fi app. If you are using an iOS device, the appearance may be dierent from that of the screenshots, but the process is the same.Step 1Search for the free D-Link Wi-Fi App on the Apple App Store or Google Play and install. You can also scan the QR code on the right, which will take you to the respective D-Link Wi-Fi app store page directly.Step 2Launch the D-Link Wi-Fi App from the Home screen of your device.Step 3Click on the Install Your Device Button at the bottom of the screen. (Or click on the Menu button on the top left of the app and do the same.)D-Link Wi-Fi
18D-Link DIR-1360 User ManualSection 3 - InstallationD-Link Wi-Fi App (continued)Step 4Select from list of options the device you want to install. If you do not see your device listed choose "Others" then tap NEXT.Step 5You will now be guided through a step-by-step process for setting up your device. Simply follow the on-screen instructions to complete the installation and DIR-1360 conguration process.
19D-Link DIR-1360 User ManualSection 4 - CongurationCongurationEnter your password. If you previously followed the setup wizard, please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed.Note: If you cannot remember your password and cannot log in, press and hold the recessed reset button for longer than 10 seconds to restore the router to its default settings.To access the conguration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local./ or you may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar.The router’s home page will open displaying its current connection status.The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time.Note: The system will automatically log out after a period of inactivity.
20D-Link DIR-1360 User ManualSection 4 - CongurationHomeThe Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard, refer to Setup Wizard on page 13 for more information.To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively.Click Release IP Address to disconnect from the Internet. If you do this and wish to reconnect, click Renew.To recongure the Internet settings, refer to Internet on page 23.Internet
21D-Link DIR-1360 User ManualSection 4 - CongurationDIR-1360Click on the DIR-1360 icon to view details about the router and its wireless settings.Here you can see the router’s current Wi-Fi network name and password, as well as the router's MAC address, IPv4 address, and IPv6 address.To recongure the network settings, either click Go to settings in the center, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to Network on page 58 for more information.To recongure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to Wireless on page 54 for more information.
22D-Link DIR-1360 User ManualSection 4 - CongurationConnected ClientsClick on the Connected Clients icon to view details about the router and its wireless settings.On this page you can see all the clients currently connected to the router, and their IP addresses.To edit each client’s settings, click the pencil icon on the client you want to edit.Name: Enter a custom name for this client.Vendor: Displays the vendor of the device.MAC Address: Displays the MAC address of the device.IP Address: Displays the current IP address of this client.Reserve IP: Enable to reserve this IP address for this client.IP Address (Reserved):Specify an IP address for the DIR-1360's DHCP server to assign.Parental Control: Allow or Block access to the router.Click Save when you are done.
23D-Link DIR-1360 User ManualSection 4 - CongurationSettingsWizardInternetIn the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the rst time. Refer to Setup Wizard on page 13 for details.In the Settings menu on the bar on the top of the page, click Internet to see the Internet conguration options.For Dynamic IP (DHCP) refer to page 24.For Static IP refer to page 25.For PPPoE refer to page 26.For PPTP refer to page 28.For L2TP refer to page 30.For DS-Lite refer to page 32.To congure an IPv6 connection, click the IPv6 link. Refer to page 33.My Internet Connection Is:Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.
24D-Link DIR-1360 User ManualSection 4 - CongurationDynamic IP (DHCP)Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not specify an IP address to use.Advanced SettingsHost Name: The host name is optional but may be required by some ISPs. Leave it blank if you are not sure.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP (Default is AUTO).MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.
25D-Link DIR-1360 User ManualSection 4 - CongurationStatic IPSelect Static IP if your IP information is provided by your Internet Service Provider (ISP).IP Address: Enter the IP address provided by your ISP.Subnet Mask: Enter the subnet mask provided by your ISP.Default Gateway: Enter the default gateway address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Advanced SettingsSecondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.
26D-Link DIR-1360 User ManualSection 4 - CongurationPPPoESelect PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On Demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPService Name: Enter the ISP service name (optional).Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
27D-Link DIR-1360 User ManualSection 4 - CongurationMAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Static IPIP Address: Enter the IP address provided by your ISP.Service Name: Enter the ISP service name (optional).Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.MAC Address Clone:The default MAC address is set to the Internet port’s physical interface MAC address on the router. You can use the drop-down menu to replace the Internet port’s MAC address with the MAC address of a connected client.Click Save when you are done.PPPoE (continued)
28D-Link DIR-1360 User ManualSection 4 - CongurationPPTPChoose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password.PPTP Server IP Address:Enter the PPTP server IP address provided by your ISP.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPPrimary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
29D-Link DIR-1360 User ManualSection 4 - CongurationStatic IPPPTP IP Address: Enter the IP address provided by your ISP.PPTP Subnet Mask:Enter the subnet mask provided by your ISP.PPTP Gateway IP Address:Enter the gateway IP address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.Click Save when you are done.PPTP (continued)
30D-Link DIR-1360 User ManualSection 4 - CongurationL2TPChoose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password.L2TP Server: Enter the L2TP server IP address provided by your ISP.Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Reconnect Mode: Select either Always on, On demand, or Manual.Maximum Idle Time:Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, select Always on as the reconnect mode.Advanced SettingsAddress Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP.Dynamic IPPrimary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.
31D-Link DIR-1360 User ManualSection 4 - CongurationStatic IPL2TP IP Address: Enter the IP address provided by your ISP.L2TP Subnet Mask:Enter the subnet mask provided by your ISP.L2TP Gateway IP Address:Enter the gateway IP address provided by your ISP.Primary DNS Server:Enter the primary DNS server IP address assigned by your ISP.Secondary DNS Server:Enter the secondary DNS server IP address assigned by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. The recommended setting is Auto.Click Save when you are done.L2TP (continued)
32D-Link DIR-1360 User ManualSection 4 - CongurationDS-LiteDS-Lite is an IPV4/IPv6 hybrid connection type. After selecting DS-Lite, the following parameters will be available for conguration:Advanced SettingsDS-Lite Conguration:Select DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 address automatically. Select Manual Conguration to enter the AFTR IPv6 address manually.DS-Lite DHCPv6B4 IPv6 Address: Enter the B4 IPv4 address value used here.WAN IPv6 Address:Once connected, the WAN IPv6 address will be displayed here.IPv6 WAN Default Gateway:Once connected, the IPv6 WAN default gateway address will be displayed here.ManualAFTR IPv6 Address:Enter the AFTR IPv6 address used here.B4 IPv6 Address: Enter the B4 IPv4 address value used here.WAN IPv6 Address:Once connected, the WAN IPv6 address will be displayed here.IPv6 WAN Default Gateway:Once connected, the IPv6 WAN default gateway address will be displayed here.Click Save when you are done.
33D-Link DIR-1360 User ManualSection 4 - CongurationIPv6To congure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4.For Auto Detection refer to page 34.For Static IPv6 refer to page 36.For Auto Conguration (SLAAC/DHCPv6) refer to page 38.For PPPoE refer to page 41.For IPv6 in IPv4 Tunnel refer to page 45.For 6 to 4 refer to page 48.For 6rd refer to page 50.For Local Connectivity Only refer to page 52.My Internet Connection Is:Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options.
34D-Link DIR-1360 User ManualSection 4 - CongurationAuto DetectionSelect Auto Detection to automatically detect the IPv6 connection method used by your Internet Service Provider (ISP). If Auto Detection fails, you can manually select another IPv6 connection type.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:If you selected Use the following DNS address above, enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable DHCP Prex Delegation. LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available for conguration:LAN IPv6 Address: Enter a valid LAN IPv6 address. LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
35D-Link DIR-1360 User ManualSection 4 - CongurationAuto Detection (continued)Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface.Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.Click Save when you are done.
36D-Link DIR-1360 User ManualSection 4 - CongurationStatic IPv6Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).IPv6 DNS SettingsIf Use the following DNS address is selected for DNS Type:Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsIf Enable DHCP-PD is disabled these additional parameters are available for conguration:LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).
37D-Link DIR-1360 User ManualSection 4 - CongurationStatic IPv6 (continued)If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.Click Save when you are done.
38D-Link DIR-1360 User ManualSection 4 - CongurationAuto Conguration (SLAAC/DHCPv6)Select Auto Conguration if your ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you to adjust settings on your side before your router can connect to the IPv6 Internet.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prex delegation services.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available for conguration:LAN IPv6 Address: Enter a valid LAN IPv6 address.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
39D-Link DIR-1360 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.Auto Conguration (SLAAC/DHCPv6) (continued)
40D-Link DIR-1360 User ManualSection 4 - CongurationAuto Conguration (SLAAC/DHCPv6) (continued)If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.
41D-Link DIR-1360 User ManualSection 4 - CongurationPPPoESelect PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the Internet.PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session.Address Mode: Select Static IP if your ISP assigned you an IP address. In most cases, select Dynamic IP.MTU: Maximum Transmission Unit - you may need to change the MTU foroptimal performance with your ISP.If you selected Static IP as the Address Mode and Share with IPv4 as the PPPoE Session:IP Address: Enter the IP address provided by your ISP.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.If you selected Create a new session as the PPPoE Session:Username: Enter the username provided by your ISP.Password: Enter the password provided by your ISP.Address Mode: Select either Dynamic IP or Static IP.Service Name: Enter the ISP service name (optional).Reconnect Mode: Select either Always On or Manual.MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP.
42D-Link DIR-1360 User ManualSection 4 - CongurationIf you selected Static IP as the Address Mode and Create a new session as the PPPoE Session:IP Address: Enter the IP address provided by your ISPService Name: Enter the ISP service name (optional).Reconnect Mode: Select either Always-on or Manual.MTU: Maximum Transmission Unit - you may need to change the MTU foroptimal performance with your ISP.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address.Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.PPPoE (continued)
43D-Link DIR-1360 User ManualSection 4 - CongurationPPPoE (continued)If Enable DHCP-PD is disabled these additional parameters are available for conguration:LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).
44D-Link DIR-1360 User ManualSection 4 - CongurationPPPoE (continued)If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.If DHCP-PD is disabled in LAN IPv6 Address Settings:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.
45D-Link DIR-1360 User ManualSection 4 - CongurationIPv6 in IPv4 TunnelThe user can congure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunnelling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure.Remote IPv4 Address:Enter the IPv4 remote address you will use.Remote IPv6 Address:Enter the IPv6 remote address you will use.Local IPv4 Address:Displays the current local IPv4 address.Local IPv6 Address:Enter the IPv6 local address you will use.Subnet Prex Length:Enter the subnet prex length supplied by your ISP.IPv6 DNS SettingsDNS Type: Select either Obtain DNS server address automatically or Use the following DNS address.If Use the following DNS address is selected:Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.
46D-Link DIR-1360 User ManualSection 4 - CongurationLAN IPv6 Address SettingsEnable DHCP-PD: Enable or disable prefix delegation services. This option is only available if you selected Dynamic IP for address mode.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.If Enable DHCP-PD is disabled, these additional parameters are available forconguration:LAN IPv6 Address: If DHCP-PD disabled or static address mode is selected, enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.Advanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.If DHCP-PD is enabled in LAN IPv6 Address Settings:Enable Automatic DHCP-PD in LAN:Enable or disable DHCP-PD for other IPv6 routers connected to the LAN interface. Note: This feature requires a smaller subnet prex than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.IPv6 in IPv4 Tunnel (continued)
47D-Link DIR-1360 User ManualSection 4 - CongurationIf you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.If DHCP-PD is disabled in LAN IPv6 Address Settings and SLAAC+Stateless DHCP or SLAAC+RDNSS is chosen as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If DHCP-PD is disabled in LAN IPv6 Address Settings and Stateful DHCPv6 is chosen as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.IPv6 in IPv4 Tunnel (continued)
48D-Link DIR-1360 User ManualSection 4 - Conguration6to4In this section the user can congure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technology that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet.6to4 Address: Displays the 6 to 4 address. 6to4 Relay: Enter the 6 to 4 relay supplied by your ISP. Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.LAN IPv6 Address SettingsLAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
49D-Link DIR-1360 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.6to4 (continued)
50D-Link DIR-1360 User ManualSection 4 - Conguration6rdIn this section the user can congure the IPv6 6rd connection settings.Assign IPv6 Prex: Currently unsupported.Primary DNS Server:Enter the primary DNS server address. Secondary DNS Server:Enter the secondary DNS server address.6rd Manual CongurationEnable Hub and Spoke Mode:Enable this option if you want to minimize the number of routes to the destination by using a hub and spoke method of networking.6rd Conguration: Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Conguration to enter the settings yourself.If you selected Manual conguration6rd IPv6 Prex: Enter the 6rd IPv6 prex and mask length supplied by your ISP.WAN IPv4 Address Displays the router’s IPv4 address.6rd Border Relay IPv4 Address:Enter the 6rd border relay IPv4 address settings supplied by your ISP.LAN IPv6 Address SettingsLAN IPv6 Address: Displays the router’s LAN IPv6 Address link-local address.LAN IPv6 Link-Local Address:Displays the router’s LAN link-local address.
51D-Link DIR-1360 User ManualSection 4 - CongurationAdvanced Settings - Address Autoconguration SettingsEnable Automatic IPv6 Address Assignment:Enable or disable the Automatic IPv6 Address Assignment feature.Autoconguration Type:Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6.If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconguration Type:Router Advertisement Lifetime:Enter the router advertisement lifetime (in minutes).If you selected Stateful DHCPv6 as the Autoconguration Type:IPv6 Address Range (Start):Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Range (End):Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.IPv6 Address Lifetime:Enter the IPv6 address lifetime (in minutes).Click Save when you are done.6rd (continued)
52D-Link DIR-1360 User ManualSection 4 - CongurationLocal Connectivity OnlyLocal Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet.Advanced SettingsIPv6 ULA SettingsEnable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings.Use Default ULA Prex:Enable this option to use the default ULA prex.If you selected Enable ULA and disabled Default ULA Prex:ULA Prex: Enter your own ULA prex.Current IPv6 ULA SettingsCurrent ULA Prex:Displays the current ULA prex. LAN IPv6 ULA: Displays the LAN's IPv6 ULA.Click Save when you are done.
53D-Link DIR-1360 User ManualSection 4 - CongurationVLANVLAN allows for services such as Triple-Play to be used, and divides a network into segments that can only be accessed by other devices in the same VLAN.In the Settings menu on the bar on the top of the page, click Internet, then click the VLAN link. Triple-PlayStatus: Click to enable or disable the Triple-Play VLAN feature. If Status is enabled:Internet VLAN ID Enter the VLAN ID for your Internet connection, as provided by your ISP.IPTV VLAN ID Enter the VLAN ID for your IPTV service, as provided by your ISP. VOIP VLAN ID: Enter the VLAN ID for your VoIP network, as provided by your ISP. Interface Trac Type SettingLAN 1-4, Wireless, Guest Zone:From the drop-down menu, you can select the type of connection (Internet, IPTV, or Voice over IP) coming from the WAN connection to each interface on the DIR-1360.Click Save when you are done.
54D-Link DIR-1360 User ManualSection 4 - CongurationSmart ConnectSmart Connect: Enable or disable the Smart Connect Feature. When enabled, only a few conguration options are available to simplify conguration.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network.Advanced SettingsSecurity Mode: Choose None or WPA/WPA2-Personal (recommended).Transmission Power:Select the desired wireless transmission power.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information.Wi-Fi Protected SetupThe easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup(WPS). Using WPS-PIN is disabled by default due to security vulnerabilities.WPS-PBC Status: Enable or disable WPS-PBC (Push Button Conguration) fuctionality.WPS-PIN Status: Enable or disable WPS-PIN fuctionality.Refer to the next page if you wish to disable Smart Connect or click Save when you are done.From this page you can congure your wireless network settings. Wireless
55D-Link DIR-1360 User ManualSection 4 - CongurationIf Smart Connect is disabled the following options are available:2.4GHz / 5GHzStatus: Enable or disable the 2.4 GHz / 5 GHz wireless network.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Advanced SettingsSecurity Mode: Choose None or WPA/WPA2-Personal (recommended).802.11 Mode (2.4 GHz):Select the desired wireless networking standards to use. The available options for the 2.4 GHz wireless network are Mixed 802.11b/g/n, Mixed 802.11g/n, 802.11n only. 802.11 Mode (5 GHz):Select the desired wireless networking standards to use. The available options for the 5 GHz wireless network are Mixed 802.11a/n/ac, Mixed 802.11n/ac, 802.11ac only, Mixed 802.11a/n, Mixed 802.11n only, or 802.11a only.Wi-Fi Channel: Select the desired channel. The default is Auto (recommended).Transmission Power:Select the desired wireless transmission power.Channel Width(2.4 GHz):Select Auto 20/40 if you are using both 802.11n and non-802.11n devices, or select 20 MHz if you are not using any 802.11n devices.Channel Width(5 GHz):Select Auto 20/40/80 if you are using 802.11ac, 802.11n, and 802.11a devices, select Auto 20/40 if you are using 802.11n and 802.11a devices, or select 20 MHz if you are only using 802.11a devices.Wireless - Smart Connect Disabled
56D-Link DIR-1360 User ManualSection 4 - CongurationHT20/40 Coexistence:(2.4 GHz):Enable or disable HT20/40 Coexistence.Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information.Wi-Fi Protected SetupThe easiest way to connect your wireless devices to the router is with Wi-Fi Protected Setup(WPS). Using WPS-PIN disabled by default due to security vulnerabilities.WPS-PBC Status: Enable or disable WPS-PBC (Push Button Conguration) functionality.WPS-PIN Status: Enable or disable WPS-PIN functionality.Click Save when you are done.
57D-Link DIR-1360 User ManualSection 4 - CongurationGuest ZoneIn the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may congure dierent zones for the 2.4 GHz and 5 GHz wireless bands.Note: If Smart Connect is enabled, Guest Zone is unavailable.2.4 GHz / 5 GHzStatus: Enable or disable the 2.4 GHz / 5 GHz wireless network.Wi-Fi Name (SSID): Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Home Network AccessInternet Access Only:Enabling this option will confine connectivity to the Internet, preventing guests from accessing other local network devices.Click Save when you are done.
58D-Link DIR-1360 User ManualSection 4 - CongurationNetworkThis section will allow you to change the local network settings of the router and to congure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. Network SettingsLAN IP Address: Enter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the conguration utility.Subnet Mask: Enter the subnet mask of the router. The default subnet mask is 255.255.255.0.Management Link:The default address to access the router’s conguration is http://dlinkrouter.local/ Here, you can replace dlinkrouter with a name of your choice.Local Domain Name:Enter the domain name (optional).Enable DNS Relay: Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server.
59D-Link DIR-1360 User ManualSection 4 - CongurationDHCP ServerStatus: Enable or disable the DHCP server.DHCP IP Address Range:Enter the starting and ending IP addresses for the DHCP server’s IP assignment.Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conict. DHCP Lease Time: Enter the length of time for the IP address lease in minutes.Always Broadcast: Enable this feature to broadcast your network's DHCP server to LAN/WLAN clients.Advanced SettingsWAN Port Speed: You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals.IPv4 Multicast Stream:Enable to allow IPv4 multicast trac to pass through the router from the Internet.IPv6 Multicast Stream:Enable to allow IPv6 multicast trac to pass through the router from the Internet.Click Save when you are done.Network (continued)
60D-Link DIR-1360 User ManualSection 4 - CongurationFeaturesQoS EngineThis Quality of Service (QoS) Engine will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent le, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the trac of the other devices on the network.In the Features menu on the bar on the top of the page, click QoS Engine.Under Connected Clients, you will see device cards representing each connected client. If some are o-screen, you can use the < and > buttons to scroll through the cards.A maximum of one device can be assigned Highest priority.A maximum of two devices can be assigned High priority.A maximum of eight devices can be assigned Medium priority.If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority.To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card.Click Save when you are done.
61D-Link DIR-1360 User ManualSection 4 - CongurationFirewallThe router’s rewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations.DMZ IP Address: If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it.Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the trac passing through the session conforms to the protocol.Enable Anti-Spoof Checking:Enable this feature to help protect your network from certain kinds of “spoong” attacks.IPv6 Simple Security:Enable or disable IPv6 simple security.IPv6 Ingress Filtering:Enable or disable IPv6 ingress ltering.
62D-Link DIR-1360 User ManualSection 4 - CongurationAdvanced Settings - Application Level Gateway (ALG) CongurationPPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol.IPSec (VPN): Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG o. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal.RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet.SIP: Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG o.Click Save when you are done.Firewall Settings (continued)
63D-Link DIR-1360 User ManualSection 4 - CongurationIPv4/IPv6 RulesThe IPv4/IPv6 Rules section is an advanced option that lets you congure what kind of trac is allowed to pass through the network. To congure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To congure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Advanced.To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn ltering OFF.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Source IP Address Range:Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Destination IP Address Range:Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address.Protocol & Port Range:Select the protocol of the trac to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Refer to Schedule on page 72 for more information.Click Save when you are done.
64D-Link DIR-1360 User ManualSection 4 - CongurationPort ForwardingPort forwarding allows you to specify a port or range of ports to open for specic devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.TCP Port: Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).UDP Port: Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example: 24,1009,3000-4000).Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information.Click Save when you are done.
65D-Link DIR-1360 User ManualSection 4 - CongurationVirtual ServerThe virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP address and Private LAN port. To congure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule. Alternatively, select the protocol/Application from the drop-down menu.Local IP: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu.Protocol: Select the protocol of the trac to allow or deny (TCP, UDP, Both, or Other).Protocol Number: If you entered Other above, enter the protocol number.External Port: Enter the public port you want to open.Internal Port: Enter the private port you want to open.Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled for. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information.Click Save when you are done.
66D-Link DIR-1360 User ManualSection 4 - CongurationWebsite FilterThe website lter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked).In the Features menu on the bar on the top of the page, click Website Filter.If you want to create a list of sites to block, select DENY client access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW clients access to ONLY these sites from the drop-down menu. All other sites will be blocked.You may specify a maximum of twenty-four web sites. To add a new site to the list, click Add Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on the corresponding trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain.Click Save when you are done.
67D-Link DIR-1360 User ManualSection 4 - CongurationStatic RoutesThe Static Routes section allows you to dene custom routes to control how data trac is moved around your network.In the Features menu on the bar on the top of the page, click Static Route.To congure IPv6 rules, click IPv6 and refer to IPv6 on page 68. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on the corresponding trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Route button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.Destination Network:Enter the IP address of packets that will take this route.Mask: Enter the subnet mask of the route.Gateway: Enter your next hop gateway to be taken if this route is used.Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Save when you are done.
68D-Link DIR-1360 User ManualSection 4 - CongurationIPv6To congure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:Name: Enter a name for the rule.DestNetwork: This is the IP address of the router used to reach the specified destination.PrexLen: Enter the IPv6 address prex length of the packets that will take this route. Gateway: Enter your next hop gateway to be taken if this route is used.Metric: Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used.Click Save when you are done.
69D-Link DIR-1360 User ManualSection 4 - CongurationDynamic DNSMost Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is.In the Features menu on the bar on the top of the page, click Dynamic DNS.At the bottom of the page are the IPv6 host settings. To congure an IPv6 dynamic DNS host, refer to IPv6 Host on page 70.Enable Dynamic DNS:Enable or disable dynamic DNS. Enabling this feature will reveal further conguration options.Status: Displays the current dynamic DNS connection status.Server Address: Enter the address of your dynamic DNS server, or select one from the drop-down menu.Host Name: Enter the host name that you registered with your dynamic DNS service provider.User Name: Enter your dynamic DNS username.Password: Enter your dynamic DNS password.Time Out: Enter a time out time (in hours).Click Save when you are done.
70D-Link DIR-1360 User ManualSection 4 - CongurationIPv6 HostThe IPv6 host settings are found at the bottom of the Dynamic DNS page.If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Record button. Click Save when you are done. If you edit or create a rule, the following options will appear:Host Name: Enter the host name that you registered with your dynamic DNS service provider.IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click Save when you are done.
71D-Link DIR-1360 User ManualSection 4 - CongurationThe Time page allows you to congure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time.In the Management menu on the bar on the top of the page, click Time & Schedule.To congure and manage your schedules, click Schedule and refer to Schedule on page 72.Time CongurationTime Zone: Select your time zone from the drop-down menu.Time: Displays the current date and time of the router.Enable Daylight Saving:Enable or disable daylight saving time.Automatic Time CongurationUpdate Time Using an NTP Server:Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To congure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date.Click Save when you are done.ManagementTime & ScheduleTime
72D-Link DIR-1360 User ManualSection 4 - CongurationScheduleSome router functions can be controlled through a pre-congured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rule button. Click Save when you are done. If you edit or create a rule, the following screen will appear:First, enter the name of your schedule in the Name eld.Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the starting hour and drag to the ending hour. You can add multiple days to the schedule.To remove a time period from the schedule, click on the X icon.Click Save when you are done.
73D-Link DIR-1360 User ManualSection 4 - CongurationSystem LogThe router keeps a running log of events. This log can be sent to a Syslog server, or sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Log SettingsSystem Log Click the Check System Log button to download a text le containing the system log.SysLog SettingsEnable Logging to Syslog Server:Check this box to send the router logs to a SysLog Server. If Logging to the Syslog Server is Enabled:Syslog Server IP Address:Enter the IP address for the Syslog server. If the Syslog server is connected to the extender, select it from the drop-down menu to automatically populate the eld. Email SettingsEnable E-mail Notication:Enable this option if you want the logs to be automatically sent to an email address.If E-mail notication is Enabled:From E-mail Address:Enter the email address your SysLog messages will be sent from.To E-mail Address: Enter the email address your SysLog messages will be sent to.SMTP Server Address:Enter your SMTP server address.
74D-Link DIR-1360 User ManualSection 4 - CongurationSystem Log (continued)SMTP Server Port: Enter your SMTP server port.Enable Authentication:Check this box if your SMTP server requires authentication.Account Name: Enter your SMTP account name.Password: Enter your SMTP account's passwordE-mail Log When Full or On ScheduleSend When Log Full:If enabled, this option will set the router to send the log when it is full.Send on Schedule: If enabled, this option will set the router to send according to a set schedule.Schedule: If you enable Send On Schedule, use the drop-down menu to select a schedule to apply. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section. Refer to Schedule on page 72 for more information.Click Save when you are done.
75D-Link DIR-1360 User ManualSection 4 - CongurationSystem AdminThis page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click System Admin. To load, save, reset settings, or reboot the router, click System and refer to Schedule on page 72.Admin PasswordPassword: Enter a new password for the administrator account. You will need to enter this password whenever you congure the router using a web browser.Enable Graphical Authentication (CAPTCHA):Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router’s network settings.Advanced Settings - AdministrationEnable HTTPS Server:Check to enable HTTPS to connect to the router securely. Instead of using http://dlinkrouter.local./, you must use https://dlinkrouter.local./ in order to connect to the router.Enable Remote Management:Remote management allows the DIR-1360 to be congured from the Internet by a web browser. A password is still required to access the web management interface. Remote Admin Port:The port number used to access the DIR-1360 is used in the URL. Example: http://x.x.x.x:8080 where x.x.x.x is the WAN IP address of the DIR-1360 and 8080 is the port used for the web management interface. Note: If you enabled Use HTTPS and wish to access the router remotely and securely, you must enter https:// at the beginning of the address.Click Save when you are done.
76D-Link DIR-1360 User ManualSection 4 - CongurationSystemSave Settings To Local Hard Drive:This option will save the current router conguration settings to a le on your computer.Load Settings From Local Hard Drive:This option will load a previously saved router conguration le. This will overwrite the router’s current conguration.Restore To Factory Default Settings:This option will restore all conguration settings back to the settings that were in eect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router conguration settings, use the Save Settings To Local Hard Drive button above. Auto Reboot CongurationReboot The Device:Click to reboot the router immediately.Auto Reboot: You may set the DIR-1360 to automatically reboot at a set time. The options are Never, Daily, Weekly. You may set the hour using a 24 hour format, the minute, and the day you wish to have the DIR-1360 automatically reboot.Click Save when you are done.SystemThis page allows you to save the router’s current conguration, load a previously saved conguration, reset the router to its factory default settings, or reboot the router.From the Admin page, click System. To return to the Admin page, click Admin.
77D-Link DIR-1360 User ManualSection 4 - CongurationUpgradeThis page will allow you to upgrade the router’s rmware, either automatically or manually. To manually upgrade the rmware, you must rst download the relevant le from http://support.dlink.com.In the Management menu on the bar on the top of the page, click Upgrade.Firmware InformationCurrent Firmware Version/Date :The current rmware's version and date will be displayed.Check for New Firmware:Click this button to prompt the router to automatically check for a new rmware version. If a newer version is found, it will prompt you to install it.Upgrade ManuallyUpgrade Firmware:If you wish to upgrade manually, rst download the rmware le you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the le to install the new rmware. You can also browse to a language pack le to install a new language pack.
78D-Link DIR-1360 User ManualSection 4 - CongurationStatisticsOn the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments.In the Management menu on the bar on the top of the page, click Statistics.You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear.The trac counter will reset if the device is rebooted.
79D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientConnect a Wireless Client to your RouterWPS ButtonStep 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS process).The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-1360 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:Step 1 - Press the WPS button on the DIR-1360 for about 1 second. The LED on the front will start to blink.Step 3 - Allow up to 1 minute for your connection to be congured. Once the Internet light stops blinking, you will be connected and your wireless connection will be encrypted with WPA2.WPS Button
80D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWhen connecting to the DIR-1360 wirelessly for the rst time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi conguration card, you can nd the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network SSID and password, or enter the Wi-Fi credentials set during the product conguration. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless IconClicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on the SSID.Windows® 10
81D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientTo connect to the SSID, click Connect. To automatically connect with the router when your device next detects the SSID, click the Connect Automatically check box. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. Your computer will now automatically connect to this wireless network when it is detected.You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected.
82D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWindows® 8WPA/WPA2It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used.To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless IconClicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name.
83D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientYou will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to.
84D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWindows® 7It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.Click on the wireless icon in your system tray (lower-right corner).The utility will display any available wireless networks in your area.Wireless IconWPA/WPA2
85D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientHighlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button.If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.The following window appears while your computer tries to connect to the router.
86D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientEnter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
87D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWPSThe WPS feature of the DIR-1360 can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to congure the WPS feature:Click the Start button and select Computer from the Start menu.Click Network on the left side.
88D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientDouble-click the DIR-1360.Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.DIR-1360
89D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientType a name to identify the network.To congure advanced settings, click the icon.Click Next to continue.
90D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientThe following window appears while the DIR-1360 is being congured. Wait for the conguration to complete.The following window informs you that WPS on the DIR-1360 has been set up successfully.Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future.Click Close to complete WPS setup.
91D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWindows Vista®Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey” option similar to the Windows Vista® utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information.
92D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientWPA/WPA2Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect.Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
93D-Link DIR-1360 User ManualSection 6- Connecting a Wireless ClientEnter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router.
94D-Link DIR-1360 User ManualSection 7 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DIR-1360. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to these examples.1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Microsoft Internet Explorer® 10 or higher- Mozilla Firefox 28 or higher- Google™ Chrome 28 or higher- Apple Safari 6 or higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable, or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
95D-Link DIR-1360 User ManualSection 7 - Troubleshooting• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. • If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty.
96D-Link DIR-1360 User ManualSection 7 - Troubleshooting3. Why can’t I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be another computer, or a URL. • Click on Start and then click Run. • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472
97D-Link DIR-1360 User ManualSection 7 - TroubleshootingYou should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with (1452+28=1480). Once you nd your MTU, you can now congure your router with the proper MTU size. To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (blank by default). Click OK to enter the web conguration page for the device. • Click on Setup and then click Manual Congure.• To change the MTU, enter the number in the MTU eld and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten.
98D-Link DIR-1360 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link.Wireless Basics
99D-Link DIR-1360 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or oce network.Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your network.How does wireless work? Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two dierent types of wireless networksl: Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues.
100D-Link DIR-1360 User ManualAppendix A - Wireless BasicsWireless Personal Area Network (WPAN)Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce, business, D-Link has a wireless solution for it.Home Uses/Benets • Gives everyone at home broadband access • Surf the web, check email, instant message, etc. • Gets rid of the cables around the house • Simple and easy to use Small Oce and Home Oce Uses/Benets • Stay on top of everything at home as you would at oce • Remotely access your oce network from home • Share Internet connection and printer with multiple computers • No need to dedicate oce space
101D-Link DIR-1360 User ManualAppendix A - Wireless BasicsWhere is wireless used? Wireless technology is expanding everywhere, not just at home or oce. People like the freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coee shops, libraries, restaurants, and convention centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or access pointMake sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.Security Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up.
102D-Link DIR-1360 User ManualAppendix A - Wireless Basics There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-1360 wireless network USB adapters.An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in ad-hoc mode to communicate.Wireless Modes
103D-Link DIR-1360 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.In Windows, type cmd in the Start Search box and click OK.At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.
104D-Link DIR-1360 User ManualAppendix B - Networking BasicsWireless SecurityThis section will show you the dierent levels of security you can use to protect your data from intruders. The DIR-1360 oers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA (Wi-Fi Protected Access) • WPA-PSK (Pre-Shared Key)What is WPA?WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is relatively simple to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
105D-Link DIR-1360 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsDevice Interfaces• Wireless Interface (2.4 GHz): IEEE 802.11 b/g/n• Wireless Interface (5 GHz): IEEE 802.11 a/n/ac• Four 10/100/1000 Mbps LAN ports• One 10/100/1000 Mbps WAN portAntenna Types• Four xed external antennasStandards• IEEE 802.11ac1,2,3• IEEE 802.11n• IEEE 802.11g• IEEE 802.11b• IEEE 802.11a• IEEE 802.11d• IEEE 802.3u• IEEE 802.3abSecurity• WPATM - Personal• WPA2TM - Personal• Wi-Fi Protected Setup (WPS) PIN/PBCPower• Input: 100 to 240 V AC, 50/60 Hz• Output: 12 V DC, 1 ATemperature• Operating: 0 to 40°C (32 to 104 °F)• Storage: -20 to 65 °C (-4 to 149 °F)Humidity• Operating: 10% to 90% maximum, non-condensing• Storage: 5% to 95% maximum, non-condensingCertications• NCC• BSMI• IPv6• Wi-Fi Protected Setup (WPS)• Wi-Fi Multimedia (WMM)Dimensions & Weight• L x W x H: 250 x 235 x 36 mm (9.8 x 9.25 x 1.4 in)• 253 g (0.51 lbs)1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n, and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors,including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.2 Frequency Range varies depending on country’s regulation.3 The DIR-1360 does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions.
106D-Link DIR-1360 User ManualAppendix D - Regulatory InformationIndustry Canada statement:This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution :(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;(ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement:(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur an de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;(ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués.Radiation Exposure Statement:This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 33cm between the radiator & your body.Déclaration d'exposition aux radiations:Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 33 cm entre le radiateur et votre corps.Regulatory Information
107D-Link DIR-1360 User ManualAppendix D - Regulatory InformationFederal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 29cm between the radiator & your body.
108D-Link DIR-1360 User ManualAppendix D - Regulatory Information以下警語適用台灣地區 依據 低功率電波輻射性電機管理辦法第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。無線傳輸設備 (UNII)在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。無線資訊傳輸設備忍受合法通信之干擾且不得干擾合法通信；如造成干擾，應立即停用，俟無干擾之虞，始得繼續使用。無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作，發射的信號應維持於操作頻帶中。電磁波曝露量MPE標準值(MPE) 1 mW/cm2，送測產品實值為 0 mW/cm2NCC 警 語：

Navigation menu