D Link DWLAG530A4 IEEE 802.11a/g Wireless PCI Adapter User Manual

D Link Corporation IEEE 802.11a/g Wireless PCI Adapter

User Manual

ManualBuilding Networks for People 11a/11g Dualband (2.4GHz/5GHz)DWL-AG530 D-Link AirPremier AGTMWireless 108Mbps PCI Adapter
2ContentsPackage Contents.................................................................................3Introduction............................................................................................4Features ...............................................................................................5Wireless Basics ....................................................................................6Getting Started....................................................................................10Using the Configuration Utility ..............................................................13Networking Basics ..............................................................................22Troubleshooting...................................................................................35Technical Specifications ......................................................................40Contacting Technical Support ..............................................................42Warranty and Registration....................................................................43Appendix ............................................................................................46How to Replace the BracketEAP TypesDefinitions of Configuration Terms
3Package ContentsContents of Package:D-Link AirPremier AGTM DWL-AG53011a/11g Dualband (2.4GHz/5GHz) Wireless 108Mbps PCI AdapterManual, Warranty and Drivers on CDPrinted Quick Installation GuideLow Prefile BracketIf any of the above items are missing, please contact your reseller.System Requirements for Configuration:An 802.11a, 802.11b or 802.11g access point (for Infrastruc-ture mode) or another 802.11a, 802.11b, or 802.11g wirelessadapter (for Ad-Hoc; Peer-to-Peer networking mode).At least 128MB of memory and a 500MHz processorWindows XP/2000 A desktop computer with an available 32-bit PCI 2.2slot* Due to DFS (Dynamic Frequency Selection), 802.11a SSID broadcast (Ad-Hoc mode) is always disabled.
4Introduction*Not all servers can provide AuthenticationThe DWL-AG530 has the newest, strongest and most advanced security featuresavailable today. When used with other 802.11 WPA/WPA2 (Wi-Fi ProtectedAccess/Wi-Fi Protected Access 2TM) and 802.1X compatible products in anetwork with a RADIUS server, the security features include:WPA/WPA2: Wi-Fi Protected Access/Wi-Fi Protected Access 2TM whichauthorizes and identifies users based on a secret key that changes automaticallyat regular intervals. WPA/WPA2 uses TKIP (Temporal Key Integrity Protocol)to change the temporal key every 10,000 packets (a packet is a kind of messagetransmitted over a network.) This ensures much greater security than thestandard WEP security. (By contrast, the previous WEP encryptionimplementations required the keys to be changed manually.)802.1X: Authentication which is a first line of defense against intrusion. In theauthentication process, the Authentication Server* verifies the identity of theclient attempting to connect to the network. Unfamiliar clients would be deniedaccess.For home users that will not incorporate a RADIUS server in their network, thesecurity for the DWL-AG530, used in conjunction with other WPA/WPA2-compatible 802.11 products, will still be much stronger than ever before. Utilizingthe Pre- Shared Key mode of WPA/WPA2, the DWL-AG530 will obtain a newsecurity key every time it connects to the 802.11 network. You only need toinput your encryption information once in the configuration menu. No longer willyou have to manually input a new WEP key frequently to ensure security. Withthe DWL-AG530, you will automatically receive a new key every time youconnect, vastly increasing the safety of your communication.At up to fifteen times the speed of previous wireless devices (up to 108Mbps inSuper AG mode), you can work faster and more efficiently, increasing productivity.With the DWL-AG530, bandwidth-intensive applications like graphics ormultimedia will benefit significantly because large files are able to move acrossthe network quickly.Inclusion of all three standards (802.11g; 802.11a; 802.11b) means that theDWL-AG530 is versatile enough to allow connection to almost any 802.11network or device.
5FeaturesVersatility - The DWL-AG530 is fully compatible with IEEE 802.11a and802.11b standards, making it interoperable with 802.11a and 802.11b wire-less routers and access points in your office, home or at public wirelesshotspots.32-bit PCI Performance/Plug & Play Connectivity -The DWL-AG530is a powerful 32-bit PCI adapter that installs quickly and easily into desk-top PCs, and when used with other D-Link Air Premier AGTM productswill automatically connect to the network out of the box.Compatible with 802.11a, 802.11b and 802.11g Devices - Fully compat-ible with the IEEE 802.11a, 802.11b and 802.11g standards, the DWL-AG530can connect with existing 802.11b, 802.11g- or 802.11a- compliant routers,access points and cards. That means you can still communicate with col-leagues and friends while you have the ability to link to even more wirelessBetter Security with 802.1X and WPA/WPA2 -With the DWL-AG530 inyour desktop PC you can securely connect to a wireless network using802.1x for wireless authentication, as well as WPA/WPA2 (Wi-Fi ProtectedAccess/Wi-Fi Protected Access 2TM) providing you a much higher level ofsecurity for your data and communication than has previously been avail-able.Faster Wireless Networking with speeds up to 108Mbps in Turbomode - Faster data transfers mean increased productivity. With the DWL-AG530 in your PC, you will have the flexibility of wireless networking speedsthat save you time and money.* IEEE 802.11a standard to provide wireless 54Mbps data rate, and up to 108Mbps (only for USA and Singapore) if enable Super A/G mode with D-Link AirPremier AGTM and AirPlus XtremeGTM products.* IEEE 802.11g standard to provide wireless 54Mbps data rate, and up to 108Mbps if enable Super A/G mode with D-Link AirPremier AGTM and AirPlus XtremeGTM products.* D-Link 108AG performance results are based on testing with other D-Link 108AG enabled devices utilizing Packet Bursting, FastFrames, Turbi Mode and Compression techniques. Data already compressed may not benefit from the D-Link 108AGWi-Fi CERTITIEDTM for WMMTM (Wi-Fi Multimedia) -The DWL-AG530delivers quality of service (QoS) for voice, audio, and video use overwireless networks. It will prioritizing packets with voice, audio, and videodata and make sure these packets are delivered ahead of less impor-tant traffic. This is a built in feature under Window 2000 and XP.
6D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, businessor public access wireless networks. D-Link wireless products will allow youaccess to the data you want, when and where you want it. You will be able toenjoy the freedom that wireless networking brings.A wireless local area network (WLAN) is a computer network that transmitsand receives data with radio signals instead of wires. WLANs are usedincreasingly in both home and office environments, and public areas such asairports, coffee shops and universities. Innovative ways to utilize WLANtechnology are helping people to work and communicate more efficiently.Increased mobility and the absence of cabling and other fixed infrastructurehave proven to be beneficial for many users.Wireless BasicsWireless users can use the same applications they use on a wired network.Wireless adapter cards used on laptop and desktop systems support the sameprotocols as Ethernet adapter cards.LEDsLED stands for Light-Emitting Diode. The DWL-AG530 has the following LEDs:A steady light indicates a connection to anaccess pointLinkA blinking light indicates data is beingtransmittedActivity
7Wireless Basics (continued)People use WLAN technology for many different purposes:Mobility – Productivity increases when people have access to data in anylocation within the operating range of the WLAN. Management decisions basedon real-time information can significantly improve worker efficiency.Low Implementation Costs – WLANs are easy to set up, manage, changeand relocate. Networks that frequently change can benefit from WLANs ease ofimplementation. WLANs can operate in locations where installation of wiringmay be impractical.Installation and Network Expansion - Installing a WLAN system can befast and easy and can eliminate the need to pull cable through walls and ceilings.Wireless technology allows the network to go where wires cannot go - evenoutside the home or office.Inexpensive Solution – Wireless network devices are as competitively pricedas conventional Ethernet network devices.Scalability – WLANs can be configured in a variety of ways to meet the needsof specific applications and installations. Configurations are easily changed andrange from Peer-to-Peer networks suitable for a small number of users to largerInfrastructure networks to accommodate hundreds or thousands of users,depending on the number of wireless devices deployed.The DWL-AG530 is compatible with the following wireless products:D-Link AirPremierTM AG DWL-AG660Wireless Cardbus Adapters used with laptop computersD-Link AirPremierTM AG DWL-7100APWireless Access PointsThe DWL-AG530 is also interoperable with other 802.11g and802.11b and 802.11a standards-compliant devices.D-Link AirPremierTM AG DI-784Wireless Broadband Routers
8Standards-Based TechnologyThe DWL-AG530 Wireless PCI Adapter utilizes the 802.11a, 802.11b and 802.11gstandard.The IEEE 802.11g standard is an extension of the 802.11b standard. It increasesthe data rate up to 54 Mbps within the 2.4GHz band utilizing OFDM technology.This means that in most environments, within the specified range of this device,you will be able to transfer large files quickly or even watch a movie in MPEGformat over your network without noticeable delays. This technology works bytransmitting high-speed digital data over a radio wave utilizing OFDM (OrthogonalFrequency Division Multiplexing) technology. OFDM works by splitting the radiosignal into multiple smaller sub-signals that are then transmitted simultaneouslyat different frequencies to the receiver. OFDM reduces the amount of crosstalk(interference) in signal transmissions. The D-Link DWL-AG530 will automaticallysense the best possible connection speed to ensure the greatest speed andrange possible.Wireless Basics (continued)802.11g offers the most advanced network security features available today,including: WPA, WPA2, 802.1x, TKIP, AES and Pre-Shared Key mode.The DWL-AG530 is backwards compatible with 802.11b devices. This meansthat if you have an existing 802.11b network, the devices in that network will becompatible with 802.11g devices at speeds up to 11Mbps in the 2.4GHz range.
9Wireless Basics (continued)Installation ConsiderationsThe D-Link AirPremier AG DWL-AG530 lets you access your network, using awireless connection, from virtually anywhere within its operating range. Keep inmind, however, that the number, thickness and location of walls, ceilings, orother objects that the wireless signals must pass through, may limit the range.Typical ranges vary depending on the types of materials and background RF(radio frequency) noise in your home or business. The key to maximizingwireless range is to follow these basic guidelines:Keep your product away (at least 3-6 feet or 1-2 meters) from electricaldevices or appliances that generate RF noise.4Keep the number of walls and ceilings between the DWL-AG530 andother network devices to a minimum - each wall or ceiling can reduceyour DWL-AG530’s range from 3-90 feet (1-30 meters.) Position yourdevices so that the number of walls or ceilings is minimized.1Be aware of the direct line between network devices. A wall that is 1.5feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)thick! Position devices so that the signal will travel straight through awall or ceiling (instead of at an angle) for better reception.2Building materials can impede the wireless signal - a solid metal dooror aluminum studs may have a negative effect on range. Try to positionwireless devices and computers with wireless adapters so that the signalpasses through drywall or open doorways and not other materials.3TM
10Getting Started Infrastructure – using an access point or wireless router such as the DWL-7100AP.Ad-Hoc – directly connecting to another computer, for Peer- to-Peer communication, using wireless network adapters on each computer, such as two or more DWL-AG530 Wireless PCI Adapters.On the following pages we will show you an example of an InfrastructureNetwork and an Ad-Hoc Network.An Infrastructure network contains an access point or a wireless router.The Infrastructure Network example shown on the following page containsthe following D-Link network devices (your existing network may becomprised of other devices):A wireless router - D-Link AirPremierTM AG DI-784A laptop computer with a wireless adapter -D-Link Air PremierTM AG DWL-AG660A desktop computer with a wireless adapter -D-Link Air PremierTM AG DWL-AG530A ADSL modem - D-Link DSL-300TThere are basically two modes of networking:* Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
11You will need broadband Internet access (a Cable or DSL-subscriber lineinto your home or office).Consult with your Cable or DSL provider for proper installation of the modem.Connect the Cable or DSL modem to your broadband router. (See theQuick Installation Guide included with your router).Install the D-Link AirPremierTM AG DWL-AG530 Wireless PCI Adapter intoan available PCI slot on your desktop computer.(See the Quick Installation Guide included with the network adapter).Install the D-Link DWL-AG660 Wireless Cardbus Adapter into a laptopcomputer.(See the Quick Installation Guide included with the DWL-AG660).If you wish, you may connect a computer that is equipped with an Ethernetnetwork adapter (such as a DFE-528TX) to the router also.A RADIUS server is optional. Connect a RADIUS server to your networkto use all the features of WPA. (Without a RADIUS server you can still usethe WPA Pre-Shared Key mode.) RADIUS Authentication can also beprovided by another service provider over the Internet and remote to yournetwork site.Getting Started (continued)DWL-AG660with Laptop PCDWL-AG530Setting up a Wireless Infrastructure Network1234567For a typical wire-less setup at home(as shown here),please do thefollowing:DI-784
12Getting Started (continued)Setting up a Wireless Ad-Hoc NetworkInstall the DWL-AG660 into a laptop computer. (See the QuickInstallation Guide included with the DWL-AG660).Set the wireless configuration for the adapters to Ad-Hoc mode, setthe adapters to the same channel, and assign an IP address to eachcomputer on the Ad-Hoc network. (See box below).When assigning IP addresses to the computers on the network, pleaseremember that the IP address for each computer must be in the sameIP address range as all the computers in the network, and the subnetmask must be exactly the same for all the computers in the network.For example: If the first computer is assigned an IP address of 192.168.0.2with a subnet mask of 255.255.255.0, then the second computer can beassigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0,etc.IMPORTANT: If computers or other devices are assigned the same IPaddress, one or more of the devices may not be visible on the network.IP AddressDWL-AG660DWL-AG530Install the D-Link DWL-AG530 Wireless PCI Adapter into the desktopcomputer. (See the Quick Installation Guide included with the DWL-AG530).
13D-Link AirPremierAGTM DWL-AG530 uses the Configuration Utility as themanagement software. The utility provides the user an easy interface to changeany settings related to the wireless adapter. After you have completed theinstallation of the DWL-AG530 (refer to the Quick Installation Guide that camewith your purchase) whenever you start the computer, the Configuration Utilitystarts automatically and the system tray icon is loaded in the toolbar (seeillustration below*.) Clicking on the utility icon will start the Configuration Utility.Another way to start the Configuration Utility is to click on Start>Programs>D-Link AirPremierAGTM > D-Link AirPremier AGTM Utility.Select the Wireless Networks tab.Uncheck the box in the properties windowthat enables windows configuration.Using the Configuration UtilityIf you are using Windows XP, you can use either the Zero Configuration Utilityor the D-Link Configuration Utility.If the icon does not display in the taskbar, then click onthis icon on your desktop to open.To use the D-Link Configuration Utility with XP, right-clickon the wireless network icon in the taskbar in the lowerright-hand corner of your computer screen.In the window that appears, selectView Available Wireless Networksand click the Advanced button. Thescreen at right will appear.After you have done this, you can then use the D-LinkConfiguration Utility with XP by clicking on the D-LinkConfiguration Utility icon. *Configuration Utility iconin the system trayTo access the WPA/WPA2 securityfeatures of the DWL-AG530 you mustinstall the Aegis software (included onthe installation CD) before inserting theAdapter into your laptop PC.
14Link InfoUsing the Configuration Utility (continued)After clicking on the Configuration Utility icon, the Link Info screen will displaythe settings for the DWL-AG530:SSID:The Service Set Identifier is thename assigned to the wirelessnetwork. The factory SSID set-ting is default.Tx Rate:Tx Rate settings are automatically determined for an optimal speed up to amaximum of 54Mbps (108Mbps in Turbo mode).Status:Displays the MAC address ofthe access point or router towhich the DWL-AG530 is asso-ciated.Channel:The channel selection is automatically determined by the DWL-AG530.Frequency:802.11b indicates that the DWL-AG530 is communicating in the2.4GHz band.Encryption:You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.Wireless Mode:Either Infrastructure or Ad-Hoc will be displayed here. (Please see the GettingStarted section in this manual for an explanation of these two modes.)Signal Strength/Link Quality:Packet Count:Displays the statistics of the data packets that are transmitted and received.Rescan Button:Rescans for the strongest signal in your environment and associates with thataccess point or router.Displays the Link Quality for the DWL-AG530 wireless connection to the ac-cess point. The signal strength represents the wireless signal between theaccess point and the DWL-AG530. The percentage coincides with the graphi-cal bar.Connection Info:The connection status is displayed here.* Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
15Wireless Mode:Authentication:Keys 1-4:Select the default key.Data Encryption:IP Settings:Click on the pull-down menu; select from thefollowing options:Infrastructure - Connecting to the WLANusing an access point. (This is the defaultsetting).Ad-Hoc - Wireless mode used whenconnecting directly to a computer equipped with a wireless adapter in aPeer-to-Peer environment.Choose one of the following modes:Click Apply to save changes.When you click IP Settings in the Configuration window, the pop-up screenshown on the next page will appear. Configure the IP settings in that window.Hexadecimal digits consist of the numbers 0-9 and the letters A-F.ASCII (American Standard Code for Information Interchange) is a code forrepresenting English letters as numbers from 0-127.Using the Configuration Utility (continued)ConfigurationSelect Enabled or Disabled.Open Authentication - The DWL-AG530 is visible to all devices on thenetwork.Shared Authentication- Allows communication only with other deviceswith identical WEP settings.WPA/WPA2* - Select to enable WPA/WPA2. Click Athentication Config.WPA-PSK/WPA2-PSK* - Select to enable WPA-PSK/WPA2-PSK. ClickAuthentication Config.*(See the following pages for more detailed configuration instructions.)IEEE802.1x:Enable 802.1x in this field. (802.1x is automatically enabled when WPA/WPA2or WPA-PSK/WPA2-PSK is selected.)SSID:Service Set Identifier is a name that identifies awireless network. Access points and wirelessdevices attempting to connect to a specificWLAN (Wireless Local Area Network) must usethe same SSID. The default setting is default.Key Length:Select the key length and either ASCII or hexadecimal format.
16Configuration > IP SettingsUsing the Configuration Utility (continued)Obtain an IP Address Automatically:Choose this option to obtain an IP address automatically through a DHCPserver.Assign the following IP Address:Choose this option to assign a static IP address.Obtain DNS Server Address Automatically:Choose this option to obtain a DNS server address automatically.Use the following DNS Server address:If you make this selection, enter the Preferred DNS server and the AlternateDNS server in the appropriate fields.
17Using the Configuration Utility (continued)Configuration>WPA/WPA2Advanced Security SettingsAuthentication > WPA/WPA2 >802.1XThe Advanced Security Set-tings screen will appear, asshown below.Select the EAP Type youwant to use. Configure theinformation needed forauthenticating.Click OK. The WPA/WPA2configuration is complete!Trusted CA List.Inner AuthenticationProtocol.For an explanation ofthe terms shown inthis window please see theappendix.Select WPA/WPA2 inthe Authentication field.ClickAuthentication ConfigWhen you select WPA/WPA2, 802.1X is Enabled.
18Configuration > WPA-PSK/WPA2-PSKSelect WPA-PSK/WPA2-PSK in the Authenticationfield.ClickAuthentication ConfigWhen you select WPA-PSK/WPA2-PSK, 802.1X is Dis-abled.Using the Configuration Utility (continued)Authentication > WPA-PSK/WPA2-PSK > 802.1XEnter the WPA/WPA2passphrase.WPA-PSK/WPA2-PSKdoes not re-quire a RADIUSserver in the network.Click OK. The WPA-PSK/WPA2-PSKconfiguration iscomplete!Advanced Security Settings
19Frequency:Select the network fre-quency from these options:Auto; b 2.4GHz; b/g2.4GHz; or a 5GHz.Profile IP Settings:You can Enable or Disable the IP Settings portion of your profile here. If youselect Disable you will need to configure the IP address information eachtime you connect to a network. If you select Enable you will maintain thesame IP address information each time you connect to a network.Starting Ad-Hoc Network:If you are configuring anAd-Hoc network, select2.4GHz or 5GHz.Select Auto or 1-11.Ad-Hoc Channel:Using the Configuration Utility (continued)Data Packet Parameter:Set the Fragmentation Threshold and the RTS Threshold. Please see below.Fragmentation Threshold:This value should remain at its default setting of 2346. If you experience a highpacket error rate, you may slightly increase your fragmentation threshold withinthe value range of 256 to 2346. Setting the fragmentation threshold too low mayresult in poor performance.This value should remain at its default setting of 2346. If inconsistent data flowis a problem, only a minor modification should be made.RTS Threshold:AdvancedPower Mode:Disable - Saves no power.Fast Save - Moderate power-saving.Max Save - Saves the most power.Select Enable or Disable.Launch Utility on Startup:Enable or Disable.Super A/G:-* Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
20Refresh:Click on Refresh to getthe most updated list ofavailable networks.Available Network:The top section of the window displays the Available Networks. Scroll up anddown the list and highlight the network to which you wish to connect. Click onthe Connect button.Profile:In the lower half of the screen, you can manage the profiles that you have cre-ated for the wireless network at home, at the office and in public places. Scrollup and down and highlight the profile that you wish to configure. You can Add orRemove a profile, or configure the Properties of the profile in order to connectwith an available network.Connect:Highlight a network profile; click Connect to connect to that network.Rescan:Click Rescan to rescan and connect to the strongest signal.Configure:Highlight an existingnetwork and click Config-ure; the configurationwindow on the next pagewill appear.Advanced:Highlight a network; clickAdvanced and the screenon the next page will ap-pear.Add:Click Add and the screen on the next page will appear.Remove:Highlight a network profile; click Remove to remove a network from the profilelist.Properties:Highlight a network profile; click Properties and the screen on the next pagewill appear.Using the Configuration Utility (continued)Site Survey
21Using the Configuration Utility (continued)Site Survey > Advanced, Add, Configuration or PropertiesIf you clicked on Add, you can config-ure, in this window, all the propertiesof a profile that you wish to add to thenetwork.In this window you can select the typeof network connection that applies.Click OK to save the changes.If you clicked on Configuration orProperties you can configure, in thiswindow, all the properties of a profilethat already exists in the network.AdvancedAdd, Configuration, PropertiesAboutThe About screen displays informa-tion regarding your DWL-AG530, in-cluding the MAC address, Utility ver-sion, Driver version, and Support Fre-quency.
22Using the Network Setup Wizard in Windows XPIn this section you will learn how to establish a network at home or work, usingMicrosoft Windows XP.Note: Please refer to websites such as http://www.homenethelp.comand http://www.microsoft.com/windows2000 for information about networkingcomputers using Windows 2000/Me/98SE.Go to Start>Control Panel>Network ConnectionsSelect Set up a home or small office networkNetworking BasicsWhen this screen appears, click Next.
23Please follow all the instructions in this window:Networking Basics (continued)Click Next.In the following window, select the best description of your computer. If yourcomputer connects to the Internet through a gateway/router, select thesecond option as shown.Click Next.
24Enter a Computer description and a Computer name (optional.)Networking Basics (continued)Click Next.Enter a Workgroup name. All computers on your network should have thesame Workgroup name.Click Next.
25ForPlease wait while the Network Setup Wizard applies the changes.Networking Basics (continued)When the changes are complete, click Next.Please wait while the Network Setup Wizard configures the computer.This may take a few minutes.
26Networking Basics (continued)In the window below, select the option that fits your needs. In this example,Create a Network Setup Disk has been selected. You will run this disk oneach of the computers on your network. Click Next.Insert a disk into the Floppy Disk Drive, in this case drive A.Please wait whiClick Next.
27Networking Basics (continued)Please read the information under Here’s how in the screen below. After youcomplete the Network Setup Wizard you will use the Network Setup Disk torun the Network Setup Wizard once on each of the computers on your net-work. To continue click Next.
28Networking Basics (continued)Please read the information on this screen, then click Finish to complete theNetwork Setup Wizard.The new settings will take effect when you restart the computer. Click Yes torestart the computer.You have completed configuring this computer. Next, you will need to run theNetwork Setup Disk on all the other computers on your network. After runningthe Network Setup Disk on all your computers, your new wireless network willbe ready to use.
29Networking Basics (continued)Naming your ComputerTo name your computer in Windows XP, please follow these directions:Click Start (in the lower left corner of the screen).Right-click on My Computer.Select Properties and click.Select the ComputerName Tab in the Sys-tem Properties window.You may enter a Com-puter Description ifyou wish; this field isoptional.To rename the computerand join a domain, clickChange.
30Networking Basics (continued)Naming your ComputerChecking the IP Address in Windows XPThe wireless adapter-equipped computers in your network must be in the sameIP address range (see Getting Started in this manual for a definition of IP ad-dress range). To check on the IP address of the adapter, please do the following:Right-click on theLocal AreaConnectionicon in the taskbar.Click on Status.Click OK.All computers on yournetwork must have the sameWorkgroup name.Select Workgroup and enterthe name of the Workgroup.In this window, enter theComputer name.
31Networking Basics (continued)Checking the IP Address in Windows XPThis window will appear.Click theSupport tab.ClickClose.Assigning a Static IP Address in Windows XP/2000Note: DHCP-capable routers will automatically assign IP addresses to the com-puters on the network, using DHCP (Dynamic Host Configuration Protocol) tech-nology. If you are using a DHCP-capable gateway/router you will not need toassign static IP addresses.If you are not using a DHCP capable gateway/router, or you need to assign astatic IP address, please follow these instructions:Go to Start.Double-clickon ControlPanel.
32Cl(TCCl Select Usaddress Protocol window (shNetworking Basics (continued)Assigning a Static IP Address in Windows XP/2000Double-clickon NetworkConnections.Double-click onProperties.Right-click on Local AreaConnections.
33 Select Use thefollowing DNS serveraddresses. Enter theLAN IP address of thewireless router. (D-Linkwireless routers have aLAN IP address of192.168.0.1).Networking Basics(continued)Assigning a Static IP Addressin Windows XP/2000You have completed the assignment of astatic IP address. (You do not need to as-sign a static IP address if you have a DHCP-capable gateway/router).Click on InternetProtocol (TCP/IP).Click Properties.IP Address:e.g., 192.168.0.2Subnet Mask:255.255.255.0Default Gateway:Enter the LAN IPaddress of the wirelessrouter. (D-Link wirelessrouters have a LAN IPaddress of 192.168.0.1).In the window below,select Use the followingIP address. Input your IPaddress and subnetmask. (The IP addresseson your network must bewithin the same range. Forexample, if one computerhas an IP address of192.168.0.2, the othercomputers should have IP addresses that are sequential, like192.168.0.3 and 192.168.0.4. The subnet mask must be the samefor all the computers on thenetwork).Click OK.Internet Protocol(TCP/IP)Client forMicrosoft Networks
34Networking Basics (continued)Checking the Wireless Connection by Pinging in Windows XP/2000Checking the Wireless Connection by Pinging in Windows Me/98SEGo to Start > Run> type cmd. Awindow similar tothis one will ap-pear. Type pingxxx.xxx.xxx.xxx,where xxx is theIP address of thewireless router oraccess point. Agood wirelessconnection willshow four repliesfrom the wirelessrouter or accesspoint, as shown.Go to Start >Run > typecommand. Awindow similar tothis will appear.Type pingxxx.xxx.xxx.xxxwhere xxx is theIP address of thewireless router oraccess point. Agood wirelessconnection willshow four repliesfrom the wirelessrouter or accesspoint, as shown.
351. How do I check that the drivers for the DWL-AG530 are installed properly?Click DeviceManager.Select theHardwareTab.TroubleshootingThis chapter provides solutions to problems that can occur during the installa-tion and operation of the DWL-AG530. Read the following descriptions if youare having problems. (The examples below are illustrated in Windows XP. Ifyou have a different operating system, the screenshots on your computer willlook similar to the following examples).Go to Start >My Computer >Properties.
36Troubleshooting (continued)Double-clickon Networkadapters.Right-click on D-LinkAirPremierTM DWL-AG530 Wireless PCIAdapter.Select Proper-ties to checkthat the driversare installedproperly.Click OK.D-Link AirPro DWL-AB650 Wireless Cardbus AdapterLook under DeviceStatus to check thatthe device is workingproperly.D-Link Air PremierTM DWL-AG530D-Link AirPremier DWL-AG53011a/11g Dualband Wireless 108Mbps PCI AdapterTMPCID-Link AirPremier DWL-AG530 Wireless PCI Adapter
37Make sure that the SSID on the D-Link DWL-AG530 Wireless PCIAdapter is exactly the same as the SSID on the access point orwireless router.Move the DWL-AG530 and access point or wireless router into thesame room and then test the wireless connection.Disable all security settings. (WEP, MAC Address Control, AES).Make sure that the access point/router is not set to a differentfrequency.Turn off your access point and the computer with the DWL-AG530.Turn on the access point, and then turn on the computer with theDWL-AG530.Refresh the DWL-AG530 Utility.Make sure that the D-Link DWL-AG530 Wireless PCI Adapter isproperly seated in the computer PCI slot.If Windows does not detect the hardware upon insertion of theadapter, make sure to completely remove drivers that werepreviously loaded. To remove the drivers, do the following:Check to see if the DWL-AG530 PCI adapter is firmly inserted intothe PCI slot of your laptop computer.Reset the access point to its factory default settings and restore theDWL-AG530 PCI adapter to the factory default settings.Troubleshooting (continued) 5.2. I cannot connect to the access point or the wireless router.3. The DWL-AG530 Power and Link lights are not on.4. I forgot my Encryption key.The computer does not recognize the D-Link DWL-AG530 Wire-less PCI Adapter.Make sure that the 802.11a access point and the adapter is setto channel 52 and above in the 802.11a band, because the DWL-AG530 does not support channels 36-48 in the 802.11a band.
38Troubleshooting (continued)A. Under Tools> select Folder Options...> select View >under Hidden files and folders > select Show hiddenfiles and folders.B. Uncheck Hide extension for known file types > clickon Apply.C. Search for previously loaded driver files. Remove thesefiles from the INF and SYSTEM32 (DRIVERS) foldersin the Windows directory. Note: Windows XP andWindows 2000 will rename .inf files that have notreceived WHQL certification into oem.inf files (e.g.,oem1.inf).Check that the LED indicators for the broadband modem areindicating normal activity. If not, there may be a problem with thebroadband connection.Check that the LED indicators on the wireless router are functioningproperly. If not, check that the AC power and Ethernet cables arefirmly connected.Check that the IP address, subnet mask, gateway, and DNS settingsare correctly entered for the network.In Infrastructure mode, make sure the same Service SetIdentifier (SSID) is specified on the settings for the wireless clientsand access points. The SSID factory default setting for the D-Linkproducts is default. (Double-click on the WLAN icon in the taskbar.The Link Info screen will display the SSID setting).In Ad-Hoc mode, both wireless clients will need to have the sameSSID. Please note that it might be necessary to set up one client toestablish a BSS (Basic Service Set) and wait briefly before settingup other clients. This prevents several clients from trying to establisha BSS at the same time, which can result in multiple singular BSSsbeing established, rather than a single BSS with multiple clientsassociated to it.6. The computer with the DWL-AG530 installed is unable to connect to the wireless network and/or the Internet.
39Check that the Network Connection for the wireless client isconfigured properly. Select AP (Infrastructure) when connectingto an access point and select Ad-Hoc mode when connectingwithout an access point. Double-click on the WLAN icon in thetaskbar > click on Configuration to change the settings for thewireless adapter.If Security is enabled, make sure that the correct encryption keysare entered on both the DWL-AG530 and the access point. Double-click on the WLAN icon in the taskbar > click Encryption. Check tosee that the key selected is set to the same key as other devices onthe network.7. How can I avoid connection problems using the DWL-AG530?Move the DWL-AG530 and the access point or wireless router intothe same room and then test the wireless connection.Change the channel of the access point.Move devices within the line of sight.If SuperA/G is enabled, make sure that Turbo mode is enabled onall Turbo mode compatible devices in your network, in order tocommunicate.Troubleshooting (continued)* Due to DFS (Dynamic Frequency Selection), 5GHz Ad-Hoc mode is always disable in EEC countries.
40IEEE 802.11bIEEE 802.11IEEE 802.11aStandardsTechnical SpecificationsPCI 2.2Bus TypeTemperature Operating: 32OF to 131OF (0OC to 55OC)95% maximum, non-condensingHumidity: 0.15 lb. (66 grams)Weight:Internal Antenna Type:Omni Directional Dipole Antenna with 2~4 dbi gain64, 128-bit WEPSecurity:802.1XWPA/WPA2 - (Wi-Fi Protected Access/Wi-Fi Protected Access2TM), 64-,128-bit WEP with TKIP, MIC, IV Expansion, Shared KeyAuthenticationPhysical Dimensions:L = 5.24 inches (133mm)W = 4.27 inches (120mm)H = 0.87 inches (22mm)IEEE 802.11gSupports Advanced Encryption Standard (AES)PCI 32-bit interface
4154Mbps OFDM, 10% PER,-73dBm 11Mbps CCK, 8% PER, -91dBm9Mbps OFDM, 10% PER,-90dBm48Mbps OFDM, 10% PER,-76dBm36Mbps OFDM, 10% PER,-82dBm12Mbps OFDM, 10% PER,-89dBm18Mbps OFDM, 10% PER,-88dBm24Mbps OFDM, 10% PER,-85dBm5.150GHz to 5.875GHzFrequency Range:2.420GHz to 2.4835GHzTechnical Specifications (continued)Data Rates:With Automatic Fallback108Mbps (Turbo Mode); 54Mbps; 48Mbps; 36Mbps; 24Mbps; 18Mbps;12Mbps; 11Mbps; 9Mbps; 6Mbps; 5.5Mbps; 2Mbps; 1MbpsModulation Technology:Orthogonal Frequency Division Multiplexing (OFDM)Media Access Control:CSMA/CA with ACKReceiver Sensitivity:6Mbps OFDM, 10% PER,-91dBmRange:Indoors: Up to 328 feet (100 meters)15dBm ± 2dBTransmitter Output Power:LEDs:LinkComplementary Code Keying (CCK)Direct Sequence Spread Spectrum (DSSS)Activity5.5Mbps CCK, 8% PER,-92dBm2Mbps QPSK, 8% PER,-93dBm1Mbps BPSK, 8% PER,-94dBm
42Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limitedwarranty for its product only to the person or entity that originally purchased the product from:•D-Link or its authorized reseller or distributor and•Products purchased and delivered within the fifty states of the United States, the District ofColumbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with anAPO or FPO.Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described belowwill be free from material defects in workmanship and materials from the date of original retail purchaseof the product, for the period set forth below applicable to the product type (“Warranty Period”), exceptas otherwise stated herein.3-Year Limited Warranty for the Product(s) is defined as follows:•Hardware (excluding power supplies and fans) Three (3) Years•Power Supplies and Fans One (1) Year•Spare parts and spare kits Ninety (90) daysD-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Periodat no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacementwill be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need notbe new or have an identical make, model or part. D-Link may in its sole discretion replace the defectiveHardware (or any part thereof) with any reconditioned product that D-Link reasonably determines issubstantially equivalent (or superior) in all material respects to the defective Hardware. Repaired orreplacement Hardware will be warranted for the remainder of the original Warranty Period from the dateof original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its solediscretion that it is not practical to repair or replace the defective Hardware, the price paid by the originalpurchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defectiveHardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price isrefunded, shall become the property of D-Link upon replacement or refund.Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”)will substantially conform to D-Link’s then current functional specifications for the Software, as setforth in the applicable documentation, from the date of original retail purchase of the Software for aperiod of ninety (90) days (“Warranty Period”), provided that the Software is properly installed onapproved hardware and operated as contemplated in its documentation. D-Link further warrants that,during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free ofphysical defects. D-Link’s sole obligation shall be to replace the non-conforming Software (or defectivemedia) with software that substantially conforms to D-Link’s functional specifications for the Softwareor to refund at D-Link’s sole discretion. Except as otherwise agreed by D-Link in writing, the replacementSoftware is provided only to the original licensee, and is subject to the terms and conditions of thelicense granted by D-Link for the Software. Software will be warranted for the remainder of the originalWarranty Period from the date or original retail purchase. If a material non-conformance is incapable ofcorrection, or if D-Link determines in its sole discretion that it is not practical to replace the non-conformingSoftware, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. Thelicense granted respecting any Software for which a refund is given automatically terminates.Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and softwareof D-Link’s products will not be applied to and does not cover any refurbished product and any productpurchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers,or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case,the product is being sold “As-Is” without any warranty whatsoever including, without limitation, theLimited Warranty as described herein, notwithstanding anything stated herein to the contrary.Submitting A Claim: The customer shall return the product to the original purchase point based on itsreturn policy. In case the return policy period has expired and the product is within warranty, thecustomer shall submit a claim to D-Link as outlined below:Warranty and Registration(USA only)
43•The customer must submit with the product as part of the claim a written description of theHardware defect or Software nonconformance in sufficient detail to allow D-Link to confirmthe same.•The original product owner must obtain a Return Material Authorization (“RMA”) number fromthe Authorized D-Link Service Office and, if requested, provide written proof of purchase ofthe product (such as a copy of the dated purchase invoice for the product) before the warrantyservice is provided.•After an RMA number is issued, the defective product must be packaged securely in theoriginal or other suitable shipping package to ensure that it will not be damaged in transit, andthe RMA number must be prominently marked on the outside of the package. Do not include anymanuals or accessories in the shipping package. D-Link will only replace the defective portionof the Product and will not ship back any accessories.•The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery(“COD”) is allowed. Products sent COD will either be rejected by D-Link or become theproperty of D-Link. Products shall be fully insured by the customer. D-Link will not be heldresponsible for any packages that are lost in transit to D-Link. The repaired or replacedpackages will be shipped to the customer via UPS Ground or any common carrier selected byD-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges areprepaid by the customer and upon request.•Return Merchandise Ship-To AddressUSA: 17595 Mt. Herrmann, Fountain Valley, CA 92708-4160Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailedwarranty information within Canada)D-Link may reject or return any product that is not packaged and shipped in strict compliance with theforegoing requirements, or for which an RMA number is not visible from the outside of the package. Theproduct owner agrees to pay D-Link’s reasonable handling and return shipping charges for any productthat is not packaged and shipped in accordance with the foregoing requirements, or that is determined byD-Link not to be defective or non-conforming.What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’sjudgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse,faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in thedocumentation for the product, or if the model or serial number has been altered, tampered with, defacedor removed; Initial installation, installation and removal of the product for repair, and shipping costs;Operational adjustments covered in the operating manual for the product, and normal maintenance;Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales inwhich D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to theproduct. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void thisWarranty.Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THEPRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING,WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORYWHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TONINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDEDHEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT ISWITH THE PURCHASER OF THE PRODUCT.Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDERANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANYLOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHERDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FORLOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE ORMALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’SPRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, ORINTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTINGFROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANYBREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OFSUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY ISREPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM
44The manufacturer is not responsible for any radio or TV interference caused by unauthorizedmodifications to this equipment; such modifications could void the user’s authority to operate theequipment.Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Somestates do not allow exclusion or limitation of incidental or consequential damages, or limitations on howlong an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limitedwarranty provides specific legal rights and the product owner may also have other rights which varyfrom state to state.Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registeredtrademarks are the property of their respective manufacturers or owners.Copyright Statement: No part of this publication or documentation accompanying this Product maybe reproduced in any form or by any means or used to make any derivative such as translation,transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., asstipulated by the United States Copyright Act of 1976. Contents are subject to change without priornotice. Copyright© 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radiointerference, in which case the user may be required to take adequate measures.FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generates, uses, and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communication. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to tryto correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.•Consult the dealer or an experienced radio/TV technician for help.For detailed warranty outside the United States, please contact corresponding localD-Link office.Register your D-Link product online at http://support.dlink.com/register/FCC Caution:(1) The devices are restricted to indoor operations within the 5.15 to 5.25GHz range. (2) For thisdevice to operate in the 5.15 to 5.25GHz range, the device must use integral antennas.This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. The antenna(s) used for this equipment must be installed to provide a separationdistance of at least eight inches (20 cm) from all persons.This equipment must not be operated in conjunction with any other antenna. LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCTCOVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES AREEXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED ORSTATUTORY.
Canada IC Statement: "To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication" "The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb" "This device has been designed to operate with an antenna having a maximum gain of 4 dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms." 45
46AppendixIncise the heat-shrinkable tubing2.1.Turn the screws tothe LEFT to loosenthem.4.6.8.3.5.7.9.Peel off thetubing.Take the DWL-AG530.Assemble the lowprofile bracket.Take apart thebracket.Fix the cable andbone of bracketwith the backuptubing.Turn the screwsto the RIGHT totighten them.Heat the tubingwith hair dryeraround 3minutes.How to Replace the Bracket
47AppendixEAP TypesConfiguration > Advanced Security Settings > EAP TypesEAP Type Inner AuthenticationProtocol Information neededfor AuthenticatingEAP-TLS CertificateUser NameLEAP User NamePasswordPAPTTLS IdentityUser NamePasswordCHAPTTLS IdentityUser NamePasswordMSCHAPTTLS IdentityUser NamePasswordDomain NameEAP-TTLSMSCHAPv2TTLS IdentityUser NamePasswordDomain Name
48EAP Type Inner AuthenticationProtocol Information neededfor AuthenticatingEAP-Generic Token CardEAP-MD5EAP-Generic Token CardUser NamePasswordEAP-MSCHAPv2EAP-MD5TTLS IdentityUser NamePasswordTTLS IdentityUser NamePasswordEAP-TTLSTTLS IdentityUser NamePasswordDomain NamePEAPUser NamePasswordValidate Server Certificate:Check Validate Server Certificate to verify the identity of the authenticationserver based on its certificate when using EAP-TTLS, PEAP, and EAP-TLS.(This is checked by default.)Certain protocols, such as EAP-TTLS, PEAP, and EAP-TLS, allow you toverify the identity of the authentication server as the server verifies youridentity. This is called mutual authentication.You can select trusted authentication server certificates using the Add buttonat the Trusted CA List (at the bottom of the Advanced Security Settingspage).EAP-MSCHAPv2 User NamePasswordDomain NameAppendixEAP Types (continued)Definitions of Terms
49Domain Name:Each server has a domain name that uniquely identifies it. That domain name isnormally contained in the Subject CN field of the server certificate. A serverdomain name ends with the name of a larger administrative domain, to whichthe server belongs.TTLS Identity:EAP-TTLS has a unique feature that other protocols do not offer. Because itsets up an encrypted tunnel for your credentials, it is also able to pass yourlogin name through that tunnel. That means that not only are your credentialssecure from eavesdropping, but your identity is protected as well. Thus, withEAP-TTLS you have two identities: an inner one, and an outer one. The inneridentity is your actual user name. Your outer identity can be completelyanonymous. Set your outer identity in the TTLS Identity field.Trusted CA List:The Trusted CA List allows you to configure which authentication serversyou trust for the purpose of logging you in to the network.Click Add at the Trusted CA List at the bottom of the Advanced Security Settingspage. Select the Trusted CA that you want to add and click OK.AppendixDefinitions of Terms (continued) (5/19/2005)

Navigation menu