D Link CS930LA2 Wireless N Home Networks Camera User Manual DCS 930 A2 UserMan 2
D Link Corporation Wireless N Home Networks Camera DCS 930 A2 UserMan 2
D Link >
Contents
- 1. (DCS-930_A2)UserMan-1
- 2. (DCS-930_A2)UserMan-2
- 3. (DCS-930_A2)UserMan-3
(DCS-930_A2)UserMan-2
![7D-Link DCS-930 User ManualSection 1 - Product OverviewHardware OverviewFront ViewPower and Link LEDCamera LensMicrophone](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-1.png)
![8D-Link DCS-930 User ManualSection 1 - Product OverviewRear View Camera StandEthernet ConnectorPower ConnectorWPS ButtonWPS LEDReset](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-2.png)
![9D-Link DCS-930 User ManualSection 2 - InstallationHardware InstallationConnect the Ethernet CableConnect the included Ethernet cable to the network cable connector located on the bottom panel of the DCS-930 and attach it to the network. Attach the External Power SupplyAttach the external power supply to the DC power input connector located on the bottom panel of the DCS-930 and connect it to your wall outlet or power strip. Power is conrmed when the green LED Power Indicator located below the lens on the DCS-930 is illuminated.Installation DCS-930L_A2 DCS-930L_A2 DCS-930L_A2 DCS-930_A2 DCS-930_A2 DCS-930_A2](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-3.png)
![10D-Link DCS-930 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link Wireless Network Camera lets you access your network using a wireless connection from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your Network Camera) - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a difference. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-4.png)
![11D-Link DCS-930 User ManualSection 2 - InstallationInsert the Installation CD-ROM into your computer’s optical drive to start the autorun program. The CD-ROM will open the Camera Installation Wizard. Simply click Start to go through the Installation Wizard, which will guide you through the installation process from connecting your hardware to conguring your camera.Starting the Camera Installation Wizard](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-5.png)
![12D-Link DCS-930 User ManualSection 2 - InstallationAlternatively, you may create a WPS connect using the WPS Button on the back of the camera.To create a WPS connection:Step 1Press and hold the WPS button on the side of the camera for three seconds. The blue WPS status LED above the button will blink.Step 2Press the WPS button on your router within 60 seconds. The WPS button is usually on the front or side of your router. On some routers, you may need to log in to the web interface and then click on an onscreen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual.The DCS-930 will automatically create a wireless connection to your router. While connecting, the green LED will ash and your camera will reboot.WPS ButtonWPS - Hardware Push Button Setup DCS-930L_A2 DCS-930_A2](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-6.png)
![13D-Link DCS-930 User ManualSection 3 - ConfigurationCongurationUsing the Conguration MenuAfter completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web conguration utility is designed to allow you to easily access and congure your DCS-930. At the end of the wizard, click Go To Camera, or enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20. DCS-930L_A2 DCS-930_A2](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-7.png)
![14D-Link DCS-930 User ManualSection 3 - ConfigurationClick the ActiveX or Java radio button to view live video.Please make sure that you have the latest version of Java application installed on your computer to ensure proper operation when viewing the video in Java mode. The Java application can be downloaded at no cost from Sun’s web site. (http://www.java.com)When you connect to the home page of your camera, you will be prompted to download ActiveX. If you want to use ActiveX to view your video images instead of Java, then you must download ActiveX.](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-8.png)
![15D-Link DCS-930 User ManualSection 3 - ConfigurationLive VideoActiveX: Java:For Windows® Users that do not have Java installed, please choose this option to view video streaming on the Home page.For Windows® users that have Java installed, you can also use this for viewing video. Mac users must choose this mode to view video. Setup > WizardYou may choose to congure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions. Otherwise, you may manually congure your connection using the Manual Internet Connection Setup.](https://usermanual.wiki/D-Link/CS930LA2.DCS-930-A2-UserMan-2/User-Guide-1681728-Page-9.png)