D Link CS7000LA1 Wireless AC Day/Night HD Mini Bullet Cloud Camera User Manual

D Link Corporation Wireless AC Day/Night HD Mini Bullet Cloud Camera

UserManual.wiki >

CS7000LA1 User Manual

User Manual

User ManualWireless AC Day/Night HD Mini Bullet Cloud CameraVersion 1.0 | 05/05/2014DCS-7000L

3D-Link DCS-7000L User ManualTable of ContentsManual Overview............................................................... 2Manual Revisions .......................................................................... 2Trademarks ..................................................................................... 2Product Overview .............................................................. 4Package Contents .........................................................................4Introduction ................................................................................... 6Features ............................................................................................ 7Hardware Overview ..................................................................... 8Front .......................................................................................... 8Rear ............................................................................................ 9Adjusting Camera Focus ..........................................................10Software Installation .......................................................11Zero Conguration Setup ........................................................12Camera Setup Wizard ................................................................16Windows Users ....................................................................16Mac Users...............................................................................17Manual Hardware Installation ................................................ 18Wireless Installation Considerations ....................................19WPS - Push Button Setup ......................................................... 20mydlink .............................................................................21Conguration ...................................................................22Live Video ......................................................................................23Setup ...............................................................................................25Setup Wizard ........................................................................25Network Setup ..................................................................... 31Wireless Setup ......................................................................34Dynamic DNS .......................................................................35Image Setup .........................................................................36Audio and Video ..................................................................38Preset.......................................................................................40Motion Detection ...............................................................42Sound Detection ................................................................. 43Time and Date ...................................................................... 44Event Setup ........................................................................... 45SD Card ...................................................................................52Advanced ......................................................................................53ICR and IR ...............................................................................53HTTPS ...................................................................................... 54Access List..............................................................................55Maintenance ................................................................................56Device Management .........................................................56System ....................................................................................57Firmware Upgrade ..............................................................58Status ..............................................................................................59Device Info ............................................................................59Logs .........................................................................................60Help .........................................................................................61Technical Specications ..................................................62

4D-Link DCS-7000L User ManualSection 1: Product OverviewProduct OverviewPackage ContentsIf any of the above items are missing, please contact your reseller.Note: Using a power supply with a dierent voltage than the one included with your product will cause damage and void the warranty for this product.DCS-7000L Wireless AC Day/Night HD Mini Bullet Cloud CameraWall mount kitPower adapterCD-ROM with User Manual and softwareQuick Installation Guide

5D-Link DCS-7000L User ManualSection 1: Product OverviewSystem RequirementsNetwork Requirements • 10/100 Ethernet network or an 802.11ac/n/g/b/a wireless networkCD Setup Wizard RequirementsComputer with the following:• A PC with a wired connection to your router• Windows® 8 (32/64bit), Windows® 7 (32/64bit), XP (32/64bit),Vista® (32/64bit), Mac OS®X 10.5 or above• An Internet connection• A router connected to your broadband modemWeb-based Conguration Utility RequirementsBrowser Requirements:• Internet Explorer 7 or higher• Firefox 12 or higher• Safari 6 or higher• Chrome 20 or higher Note: Make sure you have the latest version of Java installed.Visit www.java.com to download the latest version.mydlink Website Requirements • Broadband Internet connection• Computer with: • Internet Explorer 7 or higher (ActiveX)• Firefox 12 or higher• Safari 6 or higher• Chrome 20 or higher

6D-Link DCS-7000L User ManualSection 1: Product OverviewIntroductionCongratulations on your purchase of the DCS-7000L Wireless AC Day/Night HD Mini Bullet Cloud Camera, a versatile surveillance and security solution for your home or small oce. Designed for indoor day or night operation, the camera supports distances of up to ve meters in darkness.With Wireless AC support which eliminates the need for network cabling, the DCS-7000L can be accessed remotely, and controlled from any PC or notebook over your local network or through the Internet using a web browser. The simple installation and intuitive web-based interface oer easy integration with your existing network.The included D-Link D-ViewCam™ is a sophisticated piece of software which allows users to manage up to 32 network cameras, set email alert notications, create recording schedules, and use motion detection to record directly to a hard drive. D-ViewCam™ also allows users to upload a oor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process.

7D-Link DCS-7000L User ManualSection 1: Product OverviewSimple to UseThe DCS-7000L is a stand-alone system with a built-in CPU, requiring no special hardware or software. The DCS-7000L supports both ActiveX mode for Internet Explorer and Java mode for other browsers such as Chrome®, Firefox®, and Safari®.Supports a Variety of PlatformsSupports TCP/IP networking, HTTP, and other Internet related protocols. The DCS-7000L can also be integrated easily into other Internet/Intranet applications because of its standards-based features.Web CongurationUsing a standard Web browser, administrators can congure and manage the DCS-7000L directly from its own Web page via Intranet or Internet. This means you can access your DCS-7000L anytime, anywhere in the world.All-Day Surveillance with low light color image capabilityWith built-in infrared LEDs let you monitor an area 24 hours a day, even in areas with low light or complete darkness, the DCS-7000L is a versatile surveillance and security monitoring device.Broad Range of ApplicationsWith today’s high-speed Internet services, the DCS-7000L can provide the ideal solution for delivering live video images over the Intranet and Internet for remote monitoring. The DCS-7000L allows remote access using a Web browser for live image viewing, and allows the administrator to manage and control the DCS-7000L anytime, anywhere in the world. Many applications exist, including industrial and public monitoring of homes, oces, banks, hospitals, child-care centers, and amusement parks.802.11ac Wireless or Ethernet/Fast Ethernet SupportThe DCS-7000L oers wireless 802.11ac and Ethernet/Fast Ethernet connectivity, making the DCS-7000L easy to integrate into your existing network environment. The DCS-7000L works with 10/100 Mbps Ethernet based networks for traditional wired environments, and works with 802.11ac routers or access points for added exibility. The Site Survey feature also allows you to view and connect to any available wireless networks.Remote Monitoring UtilityThe D-ViewCam application adds enhanced features and functionality for the DCS-7000L and allows administrators to congure and access the DCS-7000L from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots.Features

8D-Link DCS-7000L User ManualSection 1: Product OverviewFrontHardware Overview1 IR LEDs Used to illuminate the camera's eld of view at night2 Power/Link LED Indicates the camera's current status3 Light Sensor Measures the lighting conditions and switches between color and infrared accordingly.4 Camera Lens Records video of the surrounding area 1432

9D-Link DCS-7000L User ManualSection 1: Product OverviewRear1 Power Connector Connects to the included DC 5 V power adapter2 Reset Button Press and hold this button for 10 seconds to reset the camera3 WPS Button Press this button for 3 seconds, then within the next 60 seconds press the WPS button on your router to set up a wireless connection automatically4 Audio In Connect an audio jack to override the built-in audio input5 microSD Card Slot Insert a microSD or microSDHC card to store recordings (max. capacity 32 GB)6 Audio Out Connect an audio jack for audio output7 Ethernet Port RJ45 connector for Ethernet3124567

10D-Link DCS-7000L User ManualSection 1: Product OverviewAdjusting Camera FocusUse the included focus adjustment tool to adjust the camera focus by rotating the circular frame around the lens clockwise or anti-clockwise. Note: For ne tuning the focus, it is recommended to use the included focus adjustment tool rather than attempting to adjust the lens with your ngers or other objects.

11D-Link DCS-7000L User ManualSection 2: InstallationThere are three ways to set up your camera:Zero Conguration Setup: If you have a mydlink-enabled router, this is the easiest way to set up your camera. Refer to page 12.Camera Setup Wizard: If you do not have a mydlink-enabled router, use the Camera Installation Wizard to guide you through setup and initial conguration of your camera. Refer to page 16.Manual Hardware Installation: This section shows you how to manually set up your camera, though in order to use the mydlink features of your camera, you will still need to run the Camera Installation Wizard. Refer to page 18.Software Installation

12D-Link DCS-7000L User ManualSection 2: InstallationZero Conguration SetupIf you have a D-Link Cloud Router, you can take advantage of Zero Conguration. Zero Conguration automatically congures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to set up your camera by simply plugging it in and connecting it to your router.Connect your camera to your mydlink enabled cloud router and Zero Conguration will automatically congure your DCS-7000L and automatically add the camera to your mydlink account. You can now remotely access your camera from the mydlink.com website to manage and monitor your DCS-7000L.Connect the Ethernet CableIf using an Ethernet connection: Connect the included Ethernet cable to theEthernet port located on the back of the DCS-7000L and connect it to your router.Attach the External Power SupplyAttach the external power supply to the DC Power receptor located on the rear panel of the DCS-7000L and connect it to your wall outlet or power strip.

13D-Link DCS-7000L User ManualSection 2: InstallationTo create a WPS connection:Step 1Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink.Step 2Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router’s User Manual.The DCS-7000L will automatically create a wireless connection to your router. While connecting, the status LED will ash. When the connection process is complete, the status LED will turn solid.Note: If your router does not support WPS, you can still use the wired connection method on the previous page. After Zero Conguration setup is complete, your router's wireless settings will be automatically transferred to the camera.Optional: WPS Wireless ConnectionAlternatively, if your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network.WPS Button

14D-Link DCS-7000L User ManualSection 2: InstallationA summary and confirmation notification will appear with the automatically congured details. Make a note of the details and click Yes to add the camera to your account.Check Your mydlink AccountFrom any computer, open a web browser, go tohttp://www.mydlink.com and log into your account. Once mydlink detects your camera, a New Device Found! notice will appear in the bottom-left corner. Click on the device name to continue.

15D-Link DCS-7000L User ManualSection 2: InstallationZero Conguration is now complete and your camera has been added to your mydlink account. You can now view your camera on the mydlink Live View tab.If you wish to connect your camera to your router wirelessly, you can simply disconnect the Ethernet cable and move the camera to its intended location; your router's wireless settings have been automatically transferred to the camera, and no further conguration is required.Your camera is now set up, and you can skip to "mydlink" on page 21 to learn more about the mydlink features of this camera, or to "Conguration" on page 22 for advanced conguration of your camera.

16D-Link DCS-7000L User ManualSection 2: InstallationCamera Setup WizardInsert the Installation CD-ROM into your computer’s optical drive to start the autorun program. If the autorun program does not open, go to My Computer, browse to your CD drive, and double-click on the autorun.exe le.Once the wizard has started simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the installation process from connecting your hardware to conguring your camera and registering it with your mydlink account.If you do not have a mydlink-enabled Cloud Router, you can use the Camera Setup Wizard to guide you through the process of adding your camera to the mydlink service. Windows Users

17D-Link DCS-7000L User ManualSection 2: InstallationMac UsersInsert the Installation CD-ROM into your computer’s optical drive. On the desktop, open your CD drive and double-click on the SetupWizard le.After about 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from connecting your hardware to conguring your camera and registering it with your mydlink account.

18D-Link DCS-7000L User ManualSection 2: InstallationConnect the Ethernet CableConnect the included Ethernet cable to the network cable connector located on the panel at the rear of the DCS-7000L and attach it to the network. Attach the External Power SupplyAttach the external power supply to the DC Power receptor located on the rear panel of the DCS-7000L and connect it to your wall outlet or power strip. Manual Hardware InstallationIf you wish to set up your camera without using the Camera Setup Wizard, please follow these steps. Note: In order to use the mydlink features of this product, you will need to go through the Camera Setup Wizard.

19D-Link DCS-7000L User ManualSection 2: InstallationThis D-Link device can connect to your wireless network from anywhere within the operating range of your wireless network. However, the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Minimize the number of walls and ceilings between your adapter and other network devices (such as your DCS-7000L) - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters).2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick. Position your devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may weaken the wireless signal. Try to position your access points, wireless routers, and other networking devices where the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product at least 3-6 feet or 1-2 meters away from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or other radio frequency sources (such as microwave ovens), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.InstallationWireless Installation Considerations

20D-Link DCS-7000L User ManualSection 2: InstallationTo create a WPS connection:Step 1Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED above the button will blink.Step 2Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature.The DCS-7000L will automatically create a wireless connection to your router. While connecting, the status LED will ash. When the connection process is complete, the status LED will turn solid.WPS - Push Button SetupIf your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network.WPS Button

21D-Link DCS-7000L User ManualSection 3: mydlinkmydlinkAfter registering your DCS-7000L camera with a mydlink account in the Camera Setup Wizard. You will be able to remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a screen similar to the following:For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User Manual section for your product to nd the latest instruction guide for your camera's mydlink features.

22D-Link DCS-7000L User ManualSection 4: CongurationCongurationAfter completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web conguration interface is designed to allow you to easily access and congure your DCS-7000L. At the end of the wizard, enter the IP address of your camera into a web browser, such as Internet Explorer®. To log in, use the User name admin and the password you created during the setup process. If you did not create a password, the default password is blank. After entering your password, click OK.Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is 192.168.0.20.

23D-Link DCS-7000L User ManualSection 4: CongurationLive VideoThis section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your language using the drop-down menu on the left side of the screen.You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.Motion Trigger IndicatorThis indicator will change color when a trigger event occurs.Note: The video motion feature for your camera must be enabled.Recording IndicatorWhen a recording is in progress, this indicator will change color.Control Pad This control pad can be used to electronically pan, tilt, and zoom (ePTZ) within the camera's predened view area, if one has been dened.Auto Pan Starts the automatic panning function. The ROI will pan from back and forth within the FOVStop Stops automatic panning.Preset Path Starts the camera's motion along the predened path.This option displays the status of the SD card. If no SD card has been inserted, this screen will display the message "Card Invalid."SD Status:

24D-Link DCS-7000L User ManualSection 4: CongurationVideo Prole 1Video Prole 2Video Prole 3Full screen modeTaking a SnapshotRecord a Video ClipSet a Storage FolderListen/Stop Audio In (from microphone)Start/Stop Audio Out (to speaker)You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest.This window indicates the total eld of view (FOV) of the camera. The red box indicates the visible region of interest (ROI).You may select the interface language using this menu.If any presets have been dened, selecting a preset from this list will display it.ePTZ Speed:Global View: Language:Go To: (Preset List)

25D-Link DCS-7000L User ManualSection 4: CongurationSetupSetup WizardYou may choose to congure your network by using the Internet Connection Setup Wizard that includes step-by-step instructions. Please refer to page "Internet Connection Setup Wizard" on page 26 for more details.If you would rather manually setup the camera internet connection, you can refer to page "Network Setup" on page 31 which provides more details on the information required.You may choose to congure motion detection by using the Motion Detection Setup Wizard that includes step-by-step instructions. Please refer to page "Motion Detection Setup Wizard" on page 29 for more details.If you would rather manually setup the camera’s motion detection features, you can refer to page "Motion Detection" on page 42 which provides more details on the information required.Internet Connection Setup Wizard:Manual Internet Connection Setup:Motion Detection Setup Wizard:Manual Motion Detection Setup:This section allows you to begin setup wizards which will guide you through the process of getting your camera’s various functions congured. If you comfortable with adjusting the settings manually, you may skip the wizards and adjust the necessary as needed.

26D-Link DCS-7000L User ManualSection 4: CongurationInternet Connection Setup WizardThis wizard will guide you through a step-by-step process to congure your new D-Link Camera and connect the camera to the Internet. Note that this wizard will not register your camera with mydlink.com.Click Next to continue.Select Automatic IP Address if you want your DHCP server (usually enabled on your router) to assign the camera its IP settings. If you want to manually assign the IP settings, select Static IP Address and enter the following details:Enter an IP address for your camera.Enter the subnet mask of your network.Enter the default gateway address. This is usually the IP address of your router.Enter the primary DNS server’s IP address. This is usually the IP address of your router.Enter the secondary DNS server’s IP address. This is optional.IP Address:Subnet Mask:Default Gateway:Primary DNS:Secondary DNS:If you are required to connect using PPPoE, select Enabled and enter the Username and Password for your PPPoE connection. Only select this option if your camera is directly connected to your broadband modem. If it is on a network with a router or gateway, do not select this option. Click Next to continue.

27D-Link DCS-7000L User ManualSection 4: CongurationA Dynamic DNS account allows you to access your camera over the Internet when you have an IP address that changes each time you connect to the Internet. If you have a Dynamic DNS account, click Enable and enter the following details:Click to enable the DDNS function. The Dynamic Domain Name Server (DDNS) will hold a DNS host name and synchronize the public IP address of the modem when it has been modied. The username and password are required when using the DDNS service.Select your Dynamic DNS Server from the drop down menu.Enter the host name of the DDNS server.Enter your username or e-mail address used to connect to the DDNS.Enter your password used to connect to the DDNS server.Re-enter your password for verication.You can setup how often the camera noties the DDNS server of its current global IP address by entering a whole number in hours. Click Next to continue.Enable:Server Address: Host Name:User Name:Password:Verify Password:Timeout:

28D-Link DCS-7000L User ManualSection 4: CongurationCreate a unique name for your camera. Click Next to continue.Select the time zone that the camera is geographically located in so that scheduled events occur at the correct time. If your time zone observes daylight saving, check the Enable Daylight Saving box.Click Next to continue.A summary of the options you selected is displayed for conrmation. If you are happy with the selected conguration, click Apply otherwise click Back to make the required changes.

29D-Link DCS-7000L User ManualSection 4: CongurationThis wizard will guide you through a step-by-step process to congure your camera's motion detection functions.Click Next to continue.Step 1This step will allow you to enable or disable motion detection, specify the detection sensitivity, and adjust the camera’s ability to detect movement.You may specify whether the camera should capture a snapshot or a video clip when motion is detected.Please see "Motion Detection" on page 42 for information about how to congure motion detection.Step 2This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected.Motion Detection Setup Wizard

30D-Link DCS-7000L User ManualSection 4: CongurationStep 3This step allows you to specify how you will receive event notications from your camera. You may choose not to receive notications, or to receive notications via e-mail or FTP.Please enter the relevant information for your e-mail or FTP account.Click Next to continue.Step 4You have completed the Motion Detection Wizard.Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts.

31D-Link DCS-7000L User ManualSection 4: CongurationNetwork SetupUse this section to congure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes.DHCP:Static IP Address:IP Address:Subnet Mask:Default Gateway:Primary DNS:Secondary DNS:Enable UPnP Presentation:Enable UPnP Port Forwarding:Forwarding Port:Forwarding Status:Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically.You may obtain a static or xed IP address and other network information from your network administrator for your camera. Enter the xed IP address in this eld.This number is used to determine if the destination is in the same subnet. The default value is 255.255.255.0.The gateway used to forward data to.The primary domain name server translates names to IP addresses.The secondary DNS acts as a backup to the primary.Enabling this setting allows your camera to be congured as a UPnP device on your network.Enabling this setting allows the camera to specify a port to forward for remote UPnP connections.Enter the UPnP port you wish to forward, and click Test to check whether it is available.Displays the current UPnP port forwarding status.

32D-Link DCS-7000L User ManualSection 4: CongurationEnable PPPoE:User Name / Password:HTTP Port:Access Name for Stream 1~3:HTTPS Port:RTSP Port:Enable CoS:Enable QoS:Enable IPv6:Enable this setting if your network uses PPPoE.Enter the username and password for your PPPoE account. Re-enter your password in the Conrm Password eld. You may obtain this information from your ISP.The default port number is 80.The default name is video#.mjpg, where # is the number of the stream.You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443.The port number that you use for RTSP streaming to mobile devices, such as mobile phones or PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera.Enabling the Class of Service setting implements a best-eort policy without making any bandwidth reservations.Enabling QoS allows you to specify a trac priority policy to ensure a consistent Quality of Service during busy periods. If the DCS-7000L is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera.Enable the IPv6 setting to use the IPv6 protocol. Enabling the option allows you to manually set up the address, specify an optional IP address, specify an optional router and an optional primary DNS.

33D-Link DCS-7000L User ManualSection 4: CongurationThe DCS-7000L allows you to multicast each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults.Please verify your settings and click Save Settings to commit them.Enable Multicast for stream

34D-Link DCS-7000L User ManualSection 4: CongurationWireless SetupThis section allows you to set up and congure the wireless settings on your camera. After making any changes, click the Save Settings button to save your changes.Site Survey:SSID:Wireless Mode:Channel:Authentication:Encryption:Key:Click the Rescan button to scan for available wireless networks. After scanning, you can use the drop-down box to select an available wireless network. The related information (SSID, Wireless Mode, Channel, Authentication, Encryption) will be automatically lled in for you.Enter the SSID of the wireless access point you wish to use.Use the drop-down box to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad-Hoc is usually used to connect directly to another computer.If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto.Select the authentication you use on your wireless network - Open, Shared, WPA-PSK, or WPA2-PSK.If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be the setting.If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network.

35D-Link DCS-7000L User ManualSection 4: CongurationDynamic DNSDDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP address of the modem when it has been modied. A user name and password are required when using the DDNS service. After making any changes, click the Save Settings button to save your changes.Enable DDNS: Server Address:Host Name:User Name:Password:Timeout:Status:Select this checkbox to enable the DDNS function.Select your Dynamic DNS provider from the pull down menu or enter the server address manually.Enter the host name of the DDNS server.Enter the user name or e-mail used to connect to your DDNS account.Enter the password used to connect to your DDNS server account.Enter the DNS timeout values you wish to use.Indicates the connection status, which is automatically determined by the system.

36D-Link DCS-7000L User ManualSection 4: CongurationImage SetupIn this section, you may congure the video image settings for your camera. A preview of the image will be shown in Live Video.Enable Privacy Mask:Anti Flicker:Mirror:Flip:Power Line:White Balance:The Privacy Mask setting allows you to specify up to 3 rectangular areas on the camera's image to be blocked/excluded from recordings and snapshots.You may click and drag the mouse cursor over the camera image to draw a mask area. Right clicking on the camera image brings up the following menu options:Disable All: Disables all mask areasEnable All: Enables all mask areasReset All: Clears all mask areas.If the video ickers, try enabling this setting.This will mirror the image horizontally.This will ip the image vertically. When turning Flip on, you may want to consider turning Mirror on as well.Select the frequency used by your power lines to avoid interference or distortion.Use the drop-down box to change white balance settings to help balance colors for dierent environments. You can choose from Auto, Outdoor, Indoor, Fluorescent, and Push Hold.

37D-Link DCS-7000L User ManualSection 4: CongurationExposure Mode:Denoise:Brightness:Contrast:Saturation:Sharpness: Reset Default:Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. The Low Noise option will focus on creating a high-quality picture without noise. You can also create 3 dierent custom exposure modes. The Max Gain setting will allow you to control the maximum amount of gain to apply to brighten the picture.This setting controls the amount of noise reduction that will be applied to the picture.Adjust this setting to compensate for backlit subjects.Adjust this setting to alter the color intensity/strength.This setting controls the amount of coloration, from grayscale to fully saturated.Specify a value from 0 to 8 to specify how much sharpening to apply to the image.Click this button to reset the image to factory default settings.

38D-Link DCS-7000L User ManualSection 4: CongurationAudio and VideoYou may congure up to 3 video proles with dierent settings for your camera. Hence, you may set up dierent proles for your computer and mobile display. In addition, you may also congure the two-way audio settings for your camera. After making any changes, click the Save Settings button to save your changes.Number of active proles:Aspect ratio:Mode:Frame size / View window area:Maximum frame rate:You can use the drop-down box to set up to 2 active proles.Set the aspect ratio of the video to 4:3 standard or 16:9 widescreen.Set the video codec to be used to JPEG, or H.264.Frame size determines the total capture resolution, and View window area determines the Live Video viewing window size. If the Frame size is larger than the Live Video size, you can use the ePTZ controls to look around.16:9 1280 x 720, 800 x 448, 640 x 360, 480 x 272, 320 x 1764:3 960 x 720, 800 x 592, 640 x 480, 480 x 352, 320 x 240Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. A higher frame rate provides smoother motion for videos, and requires more bandwidth. Lower frame rates will result in stuttering motion, and requires less bandwidth.

39D-Link DCS-7000L User ManualSection 4: CongurationVideo Quality:Constant bit rate:Fixed quality:Audio in o:Audio in gain level:Audio out o:Audio out volume level:This limits the maximum frame rate, which can be combined with the "Fixed quality" option to optimize the bandwidth utilization and video quality. If xed bandwidth utilization is desired regardless of the video quality, choose "Constant bit rate" and select the desired bandwidth.The bps will aect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality.Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates.Selecting this checkbox will mute incoming audio.This setting controls the amount of gain applied to incoming audio to increase its volume.Selecting this checkbox will mute outgoing audio.This setting controls the amount of gain applied to outgoing audio to increase its volume.

40D-Link DCS-7000L User ManualSection 4: CongurationPresetThis screen allows you to set preset points for the ePTZ function of the camera, which allows you to look around the camera's viewable area by using a zoomed view. Presets allow you to quickly go to and view a specic part of the area your camera is covering, and you can create preset sequences, which will automatically change the camera's view between the dierent presets according to a dened order and timing you can set.Note: If your View window area is the same as your Frame size, you will not be able to use the ePTZ function. Video Prole:ePTZ Speed:Arrow Buttons and Home Button:Input Preset Name:Preset List:Preset Sequence:This selects which video prole to use. You may select a value between 0 and 64. 0 is the slowest and 64 is the fastest.Use these buttons to move to a specic part of the viewing area, which you can then set as a preset. Click the Home button to return to the center of the viewing area.Enter the name of the preset you want to create, then click the Add button to make a new preset. If an existing preset has been selected from the Preset List, you can change its name by typing in a new name, then clicking the Rename button.Click this drop-down box to see a list of all the presets that have been created. You can select one, then click the GoTo button to change the displayed camera view to the preset. Clicking the Remove button will delete the currently selected preset.This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views.

41D-Link DCS-7000L User ManualSection 4: CongurationPreset List: To add a preset to the sequence, select it from the drop-down box at the bottom of this window, set the Dwell time to determine how long the camera view will stay at that preset, then click the Add button. The preset name will appear in the list, followed by the dwell time to view that preset for.You can rearrange your presets in the sequence by selecting a preset in the sequence, then clicking the arrow buttons to move it higher or lower in the current sequence. Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button.

42D-Link DCS-7000L User ManualSection 4: CongurationMotion DetectionEnabling Video Motion will allow your camera to use the motion detection feature. You may dene a motion area that will be used for monitoring. After making any changes, click the Save Settings button to save your changes.Enable Video Motion:Sensitivity:Percentage:Draw Motion Area:Erase Motion Area:Select this box to enable the motion detection feature of your camera.Species the measurable dierence between two sequential images that would indicate motion. Please enter a value between 0 and 100.Species the amount of motion in the window being monitored that is required to initiate an alert. If this is set to 100%, motion is detected within the whole window will trigger a snapshot.Draw the motion detection area by dragging your mouse in the window (indicated by the red square).To erase a motion detection area, simply click on the red square that you wish to remove.Right clicking on the camera image brings up the following menu options:Select All: Draws a motion detection area over the entire screen.Clear All: Clears any motion detection areas that have been drawn.Restore: Restores the previously specied motion detection areas.

43D-Link DCS-7000L User ManualSection 4: CongurationSound DetectionEnabling Sound Detection will allow your camera to use the built-in microphone to trigger events with audio. If this option is selected, the trigger by option under SD recording, Video Clip, or Snapshot should also be selected. After making any changes, click the Save Settings button to save your changes.Enable SoundDetection:Detection Level:Check this box to enable the motion detection feature of your camera.Species the measurable level that would indicate sound. Please enter a value between 50 and 90, the higher the number the more sensitive the camera will be to sound.

44D-Link DCS-7000L User ManualSection 4: CongurationTime and DateThis section allows you to automatically or manually congure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes.Time Zone:Enable Daylight Saving:Auto Daylight Saving:Set Date and Time Manually:Oset:Synchronize with NTP Server:NTP Server:Set the Date and Time Manually:Copy Your Computer's Time Settings:Select your time zone from the drop-down menu.Select this to enable Daylight Saving Time.Select this option to allow your camera to congure the Daylight Saving settings automatically.Selecting this option allows you to congure the Daylight Saving date and time manually.Sets the amount of time to be added or removed when Daylight Saving is enabled.Enable this feature to obtain time automatically from an NTP server.Network Time Protocol (NTP) synchronizes the DCS-7000L with an Internet time server. Choose the one that is closest to your location.This option allows you to set the time and date manually.This will synchronize the time information from your PC.

45D-Link DCS-7000L User ManualSection 4: CongurationEvent SetupIn a typical application, when motion is detected, the DCS-7000L sends images to a FTP server or via e-mail as notications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is triggered, a specied action will be performed. You can congure the DCS-7000L to send snapshots or videos to your e-mail address or FTP site.ex. Motion detection, Periodically, Digital input, System rebootEvent Conditionex. Snapshot, Video Clipsex. Email, FTPMedia(what to send)Server(where to send)ActionTo start plotting an event, it is suggested to congure server and media columns rst so that the DCS-7000L will know what action shall be performed when a trigger is activated.

46D-Link DCS-7000L User ManualSection 4: CongurationThe Event Setup page includes 4 dierent sections.• Server • Media• Event• Recording1. To add a new item - "server, media, or event," click Add. A screen will appear and allow you to update the elds accordingly.2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying.

47D-Link DCS-7000L User ManualSection 4: CongurationAdd ServerServer Name:E-mail:FTP:Network Storage:SD Card:Enter the unique name of your server.Enter the conguration for the target e-mail server account.Enter the conguration for the target FTP server account.Specify a network storage device. Only one network storage device is supported.Use the camera's onboard SD card storage.You can congure up to 5 servers to save snapshots and/or video to. After making any changes, click the Save Settings button to save your changes.

48D-Link DCS-7000L User ManualSection 4: CongurationAdd MediaMedia Name:Snapshot:Source:Send pre-event image(s) [0~3]:Send post-event image(s) [0~7]:File name prex:Add date and time sux to le name:Video clip:Source:Pre-event recording:Enter a unique name for media type you want to create.Select this option to set the media type to snapshots.Set the video prole to use as the media source. Refer to Audio and Video on "Audio and Video" on page 38 for more information on video proles.Set the number of pre-event images to take. Pre-event images are images taken before the main event snapshot is taken.Set the number of post-event images to take. Post-event images are images taken after the main event snapshot is taken. You can set up to 7 post-event images to be taken.The prex name will be added on the le name.Check it to add timing information as le name sux.Select this option to set the media type to video clips.Set the video prole to use as the media source. Refer to "Audio and Video" on page 51 for more information on video proles.This sets how many seconds to record before the main event video clip starts. You can record up to 3 seconds of pre-event video.There are three types of media, Snapshot, Video Clip, and System Log. After making any changes, click the Save Settings button to save your changes.

49D-Link DCS-7000L User ManualSection 4: CongurationMaximum duration:Maximum le size:File name prex:System log:Set the maximum length of video to record for your video clips.Set the maximum le size to record for your video clips. This is the prex that will be added to the lename of saved video clips.Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video.

50D-Link DCS-7000L User ManualSection 4: CongurationAdd EventCreate and schedule up to 2 events with their own settings here. After making any changes, click the Save Settings button to save your changes.Event name:Enable this event:Priority:Delay:Video Motion Detection:Periodic:System Boot:Network Lost:Sound Detection:Schedule:Enter a name for the event.Select this box to activate this event.Set the priority for this event. The event with higher priority will be executed rst.Select the delay time before checking the next event. It is being used for both events of motion detection and digital input trigger.Motion is detected during live video monitoring. Select the windows that need to be monitored.The event is triggered in specied intervals. The trigger interval unit is in minutes.Triggers an event when the system boots up. Triggers an event when the network connection is lost.Triggers an event when sound is detected.This option allows you to schedule the event manually.

51D-Link DCS-7000L User ManualSection 4: CongurationAdd RecordingRecording entry name:Enable this recording:Priority:Source:Recording schedule:Recording settings:Destination:Total cycling recording size:Size of each le for recording:Time of each le for recording:File Name Prex:The unique name of the entry.Select this to enable the recording function.Set the priority for this entry. The entry with a higher priority value will be executed rst.The source of the stream.Scheduling the recording entry.Conguring the setting for the recording.Select the folder where the recording le will be stored.Input a value between 200 MB and 2000000 MB (2 TB) for the space allocated to recording. New recordings will replace the oldest recording when the total recording size exceeds this value. If this is selected, les will be separated based on the le size you specify.If this is selected, les will be separated based on the maximum length you specify.The prex name will be added on the le name of the recording le(s).Here you can congure and schedule the recording settings. After making any changes, click the Save Settings button to save your changes.

52D-Link DCS-7000L User ManualSection 4: CongurationSD CardFormat SD Card:View Recorded Picture:Playback Recorded Video:Refresh:Click this icon to automatically format the SD card and create "picture" & "video" folders.If the picture les are stored on the SD card, click on the picture folder and choose the picture le you would like to view.If video les are stored on the SD card, click on the video folder and choose the video le you would like to view.Reloads the le and folder information from the SD card.Here you may browse and manage the recorded les which are stored on the SD card.

53D-Link DCS-7000L User ManualSection 4: CongurationAdvancedHere you can congure the ICR and IR settings. An IR(Infrared) Cut-Removable (ICR) lter can be disengaged for increased sensitivity in low light environments.ICR and IRAutomatic:Day Mode:Night Mode:Schedule Mode:IR Light Control:O:On:Sync:Schedule:The Day/Night mode is set automatically. Generally, the camera uses Day mode and switches to Night mode when needed.Day mode enables the IR Cut Filter.Night mode disables the IR Cut Filter.Set up the Day/Night mode using a schedule. The camera will enter Day mode at the starting time and return to Night mode at the ending time.The camera can enable or disable the IR (infrared) light according to your preferences. This setting provides additional controls depending on your specic application.The IR light will always be o.The IR light will always be on.The IR light will turn on when the ICR sensor is on.The IR light will turn on or o according to the schedule that you specify below.

54D-Link DCS-7000L User ManualSection 4: CongurationHTTPSThis page allows you to install and activate an HTTPS certicate for secure access to your camera. After making any changes, click the Save Settings button to save your changes.Enable HTTPS Secure Connection:Create Certicate Method:Status:Enable the HTTPS service.Choose the way the certicate should be created. Three options are available: Create a self-signed certicate automatically Create a self-signed certicate manually Create a certicate request and installDisplays the status of the certicate.Note: The certicate cannot be removed while the HTTPS is still enabled. To remove the certicate, you must rst uncheck Enable HTTPS secure connection.

55D-Link DCS-7000L User ManualSection 4: CongurationAccess ListHere you can set access permissions for users to view your DCS-7000L. Allow list:Start IP address:End IP address:Delete allow list:Deny list:Delete deny list:The list of IP addresses that have the access right to the camera.The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. Click Add to save the changes made.Note: A total of seven lists can be congured for both columns.The ending IP Address of the devices (such as a computer) that have permission to access the video of the camera.Remove the customized setting from the Allow List.The list of IP addresses that have no access rights to the camera.Remove the customized setting from the Delete List.For example:When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs located between 171.0.0.0 and 192.255.255.255 can access the DCS-7000L.Alowed ListDenied List

56D-Link DCS-7000L User ManualSection 4: CongurationMaintenanceYou may modify the name and administrator’s password of your camera, as well as add and manage the user accounts for accessing the camera. You may also use this section to create a unique name and congure the OSD settings for your camera.Admin Password Setting:Add User Account:User Name:Password:User List:Camera Name:Enable OSD:Label:Show Time:LED:Set a new password for the administrator’s account.Add new user account.The user name for the new account.The password for the new account.All the existing user accounts will be displayed here.Create a unique name for your camera that will be added to the le name prex when creating a snapshot or a video clip. Select this option to enable the On-Screen Display feature for your camera.Enter a label for the camera, which will be shown on the OSD when it is enabled.Select this option to enable the time-stamp display on the video screen.You may specify whether or not to illuminate the status LED on the camera.Device Management

57D-Link DCS-7000L User ManualSection 4: CongurationSystemIn this section, you may backup, restore and reset the camera conguration, or reboot the camera.Save To Local Hard Drive:Load From Local Hard Drive:Restore to Factory Defaults:Reboot Device:You may save your current camera conguration as a le on your computer.Locate a pre-saved conguration by clicking Browse and then restore the pre-dened settings to your camera by clicking Load Conguration.You may reset your camera and restore the factory settings by clicking Restore Factory Defaults.This will restart your camera.

58D-Link DCS-7000L User ManualSection 4: CongurationFirmware UpgradeThe camera's current rmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available rmware version.To upgrade the rmware on your DCS-7000L, please download and save the latest rmware version from the D-Link Support Page to your local hard drive. Locate the le on your local hard drive by clicking the Browse button. Select the le and click the Upload button to start upgrading the rmware.Current Firmware Version:Current Product Name:File Path:Upload:Displays the detected rmware version.Displays the camera model name.Locate the le (upgraded rmware) on your hard drive by clicking Browse.Uploads the new rmware to your camera.

59D-Link DCS-7000L User ManualSection 4: CongurationStatusThis page displays detailed information about your device and network connection.Device Info

60D-Link DCS-7000L User ManualSection 4: CongurationThis page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information.Logs

61D-Link DCS-7000L User ManualSection 4: CongurationThis page provides helpful information about using and conguring your camera.Help

62D-Link DCS-7000L User ManualAppendix B: Technical SpecicationsTechnical SpecicationsCamera Camera Hardware Prole 1/4” Megapixel progressive CMOS sensor 8 meter IR illumination distance Minimum illumination 0 Lux with IR LED on Built-in Infrared-Cut Removable (ICR) lter module Built-in Audio in / Audio out Minimum object distance: 200 mm 10x digital zoom Fixed length 2.4 mm Aperture f/2.0 Angle of view: (H) 98° (V) 52° (D) 115°Image Features Congurable image size, quality, frame rate, and bit rate Time stamp and text overlays Congurable motion detection windows Congurable privacy mask zones Congurable shutter speed, brightness, saturation, contrast, sharpnessVideo Compression Simultaneous H.264 / MJPEG format compression H.264 multicast streaming JPEG for still imagesVideo Resolution 16:9 - 1280x720, 800x448,640x360, 480x272, 320x176 up to 30 fps recording1 4:3 -960x720, 800x592, 640x480, 480x352, 320x240 up to 30 fps recording1Audio Compression AAC G.711External Device Interface 10/100 BASE-TX Fast Ethernet port IEEE 802.11a/b/g/n/ac 2.4 GHz, 5 GHz dual-band wireless microSD card slot2Network Network Protocols IPv6 IPv4 TCP/IP UDP ICMP DHCP client NTP client (D-Link) DNS client DDNS client (D-Link) SMTP client FTP client HTTP / HTTPS Samba client PPPoE UPnP port forwarding RTP / RTSP/ RTCP IP ltering QoS CoS Multicast IGMP SNMP (Phase II) ONVIF compliantSecurity Administrator and user group protection Password authentication HTTP and RTSP digest authentication

63D-Link DCS-7000L User ManualAppendix B: Technical SpecicationsSystem ManagementSystem Requirements for Web Interface Operating System: Microsoft Windows® 8/7/Vista/XP, or Mac with OS X 10.6 or higher Browser: Internet Explorer 7, Firefox 12, Safari 6, or Chrome version 20 or higher with Java installed and enabledEvent Management Motion detection Event notication and uploading of snapshots/video clips via email or FTP Supports multiple SMTP and FTP servers Multiple event noticationsRemote Management Take snapshots/video clips and save to local hard drive via web browser Conguration interface accessible via web browserMobile Support mydlink Lite/mydlink+ mobile app for iPhone, iPad, and Android mobile devicesD-ViewCam™ System Requirements Operating System: Microsoft Windows 8/7/Vista/XP Web Browser: Internet Explorer 7 or higher Protocol: Standard TCP/IPD-ViewCam™ Software Functions Remote management/control of up to 32 cameras Viewing of up to 32 cameras on one screen Supports all management functions provided in web interface Scheduled motion triggered, or manual recording optionsGeneral Weight 115 gramsExternal Power Adaptor Input: 100 to 240 V AC, 50/60 Hz Output: 5 V DC, 1.2 A, 50/60 HzPower Consumption 3.5 wattsTemperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F)Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensingCertications CE CE LVD FCC C-TickDimensions1 Frame rates when streaming video may vary depending on network conditions and method used.2 An SD / SDHC card of Class 6 or above is recommended. Supports card capacities up to 32 GB.9356

FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment. This device meets all the other requirements specified in Part 15E, Section 15.407of the FCC Rules.

Canada Notices Industry Canada regulatory information This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance." Cet équipement doit être installé et utilisé conformément aux instructions fournies et de l'antenne (s) utilisé pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne et ne doit pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou transmetteur. Les utilisateurs finaux et installateurs doivent être fournir des instructions d'installation de l'antenne et des conditions de fonctionnement du transmetteur de la conformité sur l'exposition aux RF CAUTION: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: Les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Navigation menu