D Link BT122 Bluetooth 2.0 EDR Dongle User Manual

D Link Corporation Bluetooth 2.0 EDR Dongle Users Manual

Users Manual

Version 2.0 D-Link DBT-122 Bluetooth USB AdapterManual(23 June 2006)
2ContentsPackage Contents ................................................................ 4System Requirements .......................................................... 4Introduction ........................................................................... 5Installing the Bluetooth Software .......................................... 6Using the Bluetooth Conguration Wizard.......................... 10Introduction to the Bluetooth Software ............................... 13Bluetooth Tray....................................................... 13Access My Bluetooth Places ................................ 13Icons Used for Bluetooth Devices and Services ... 14Bluetooth Software Basic Operations ................................. 17Start or Stop Bluetooth ......................................... 17Create a Connection ............................................. 17Find Bluetooth Devices ......................................... 18Find A Service....................................................... 19Bluetooth Connection Status ................................ 20Send to Bluetooth ................................................. 21Bluetooth Conguration ...................................................... 22Access the Bluetooth Conguration Panel ........... 22Bluetooth Services versus Bluetooth Applications 22Bluetooth Exchange Folder .................................. 22Bluetooth Applications Overview .......................... 23Applications > Human Interface Device (HID) ...... 24Applications > HID, Audio Gateway ...................... 25Applications > Serial Port ..................................... 26
3Applications > Dial-up Networking ........................ 27Applications > Fax, Headset ................................. 28Applications > Headset ......................................... 29Applications > Headset, File Transfer ................... 30Applications > Network Access ............................ 32Applications > PIM ................................................ 33Applications > My Headset / Audio Gateway ........ 36Applications > Printer ............................................ 38Bluetooth Services ................................................ 40Services > Notications ........................................ 41Services > Audio Gateway Service ...................... 42Services > Bluetooth Serial Port Service .............. 43Services > Dial-up, Fax, File Transfer Service ..... 44Services > Headset .............................................. 45Services > Network Access ................................. 46Services > PIM ..................................................... 47Hardware Settings ................................................ 51Advanced Settings ................................................ 52Accessibility Settings ............................................ 53Discovery Settings ................................................ 54Security............................................................................... 56Troubleshooting .................................................................. 58Copyright and Emissions Statements................................. 61Contacting Technical Support ............................................. 62Contents (cont’d)Bluetooth Conguration (cont’d)
4Package ContentsThese items are included with your purchase:D-Link DBT-122 USB Bluetooth Adapter USB Extension Cable Installation CD with Driver, Manual, Quick Installation Guide, & Bluetooth SoftwareIf any of the above items are missing, please contact your reseller.System RequirementsWindows XP/Me/2000/98SEOne Available USB PortCD-ROM Drive ••••••
5IntroductionIntroduction to BluetoothThe term “Bluetooth” refers to a worldwide standard for the wireless exchange of data between two devices within a Personal Area Network. In order to exchange data, two Bluetooth devices must establish a connection. Before a connection is established, one device must request a connection with another, where the second device accepts (or rejects) the connection. The originator of the request is known as the client. The device that accepts (or rejects) the request is known as the server. Many Bluetooth devices can act as both client and server. A client Bluetooth device runs a software program that requests a connection to another device as part of its normal operation. For example, the program may request a connection to a remote computer, a printer, or a modem. Becoming a Bluetooth client normally requires an action by the device operator, such as an attempt to browse a remote computer, print a le, or dial out on a modem. Every Bluetooth device that provides a service must be prepared to respond to a connection request. Bluetooth software is always running in the background on the server, ready to respond to connection requests.Introduction to the DBT-122 Bluetooth USB AdapterThe D-Link Bluetooth USB Adapter is the perfect wireless solution for quick and easy access to Bluetooth enabled devices. It is a class 2/3 low power device and is bundled with Bluetooth Software which allows you to connect to several Bluetooth devices at once. The wireless transmission range of the D-Link DBT-122 Bluetooth USB Adapter is about 10 meters (30 feet). A PC congured as the Bluetooth server can support up to seven Bluetooth client devices with IP addresses being automatically assigned upon a successful connection. The Bluetooth Software also provides Internet sharing and security access between the server and clients. After nishing the steps outlined in this manual, you will have the ability to share information, obtain network access, and take full advantage of a wireless connected environment.
6Installing the Bluetooth SoftwareUninstalling a previous version of the Bluetooth software:If you are installing the Bluetooth software for the rst time, please skip this section. Any previous versions of the Bluetooth software must be uninstalled before installing an upgraded version.Please uninstall the software by completing these steps:1) Close any open programs and insert the Driver CD into your CD-ROM Drive.2) The Autorun screen will appear. Click on Install Bluetooth Software.3) The Welcome screen will indicate the previous version of BTW that is currently installed. Click on the Next button to continue.4) Click on the Remove button from the Remove the Program screen.5) When the les have been removed, you will be presented with a screen informing of its completion.a. Click on the Finish buttonb. Click on the Yes button when the pop-up dialog box appears on the screen to reboot your PC.You have now removed the previous version of the Bluetooth software.Installing the Bluetooth SoftwareInstall the driver and software located on the D-Link CD that came with your purchase BEFORE installing the DBT-122 USB Bluetooth Adapter into your computer. Click Install Driver Insert the D-Link PersonalAir DBT-122 Driver CD in the CD-ROM drive.If this Autorun screen does not automatically appear, click on Start > Run, enter “D:\Autorun.exe” and click OK. “D” represents the letter of your CD-ROM drive.
7Click NextClick NextInstalling the Bluetooth Software (cont’d)Click AcceptClick Next
8Click OKInstalling the Bluetooth Software (cont’d)Click InstallOnly Windows XP and Windows 2000 Users will see this screen.
9Installing the Bluetooth Software (cont’d)Click OKWhen this screen appears, connect the DBT-122 to an available USB port on your USB host adapter or USB hub.
10Click FinishInstalling the Bluetooth Software (cont’d)Click YesAfter you have completed the driver and software installation and reboot your computer, a Bluetooth icon will appear on your desktop and in the bottom right hand corner of your desktop screen (systray). The Bluetooth icon gives you access to My Bluetooth Places, for conguring your Bluetooth settings. Double-click the Bluetooth icon for access to My Bluetooth Places.Using the Bluetooth Configuration WizardOnly Windows 2000, Windows Me, and Windows 98SE Users will see this screen.
11Using the Bluetooth Configuration Wizard (cont’d)Click NextType a unique name for your Computer. Select Desktop or LaptopClick NextClick NextThe Bluetooth Conguration Wizard launches the rst time that you double click on My Bluetooth Places.
12Using the Bluetooth Configuration Wizard (cont’d)Click NextSelect the Services that your DBT-122 will provide to other Bluetooth products.Click SkipClick FinishYou can choose to congure your other Bluetooth devices at this point. Otherwise, click Skip to nish the conguration for your DBT-122.
13Introduction to the Bluetooth SoftwareBluetooth TrayThe Bluetooth tray resides in the Windows system tray, which is normally located in the lower-right corner of the screen. The Bluetooth tray provides fast access to most Bluetooth operations.From the Bluetooth tray you can:· Access My Bluetooth Places—double-click the Bluetooth icon, or right-click the Bluetooth icon and then select Explore My Bluetooth Places.· Access the Bluetooth Setup Wizard. This wizard will help you:• Congure how this computer accesses a service on another Bluetooth device• Locate remote Bluetooth devices• Congure the way that this computer provides services to remote Bluetooth devices• Set the name and type of this Bluetooth device, e.g., “John’s PC” and “Desktop.”• Access the Bluetooth Conguration Panel—right-click the Bluetooth icon, and then select Advanced Conguration.• Access the Quick Connect option—right-click the Bluetooth icon, select Quick Connect, and then select the type of service to which you wish to connect.• Start/Stop Bluetooth on this computer.Access My Bluetooth PlacesMy Bluetooth Places is part of Windows Explorer.There are multiple ways to access My Bluetooth Places:• In the Windows system tray• Right-click the Bluetooth icon and select Explore My Bluetooth Places or• Double-click the Bluetooth icon• On the desktop, double-click the Bluetooth icon• Open Windows Explorer and select My Bluetooth Places in the Folders pane or from the Address shortcut menu.
14Introduction to the Bluetooth Software (cont’d)Icons Used for Bluetooth Devices and ServicesBluetooth icons provide at-a-glance feedback about a device or service’s status by changing appearance.The Bluetooth icon in the Windows system tray provides feedback about Bluetooth status.Bluetooth Icon Indicates Bluetooth StatusEnabled ConnectedBlue with White Blue with GreenBlue with RedFigure 1: Bluetooth Icon Figure 2: Device Icons for Windows 98SE, Me and 2KDevice Icons for Windows 9x, Me and 2KName Normal Connected PairedAudio GatewayDesktopHeadsetHuman Interface DeviceLaptopModemNetwork Access PointPersonal Digital AssistantPrinterTelephoneUnknown
15Introduction to the Bluetooth Software (cont’d)Icons Used for Bluetooth Devices and Services (cont’d)Figure 4: Device Icons for Windows XPFigure 3: Service Icons for Windows 98SE, Me and 2KAudio GatewayDial-up NetworkingFaxHeadsetNetwork AccessPIM Item TransferPIM SynchronizationPublic FolderSerial PortAudio GatewayDesktopHeadsetHuman Interface DeviceLaptopModemNetwork Access PointPersonal Digital AssistantPrinterTelephoneUnknown Device
16Introduction to the Bluetooth Software (cont’d)Figure 5: Service Icons for Windows XPIcons Used for Bluetooth Devices and Services (cont’d)Audio GatewayDial-up NetworkingFaxHeadsetNetwork AccessPIM Item TransferPIM SynchronizationPublic FolderSerial Port
17Bluetooth Software Basic OperationsStart or Stop BluetoothTo start Bluetooth: in the Windows system tray, right-click the Bluetooth icon and select Start the Bluetooth Device. The Bluetooth icon is blue in color with a white insert when Bluetooth is running.To stop Bluetooth: in the Windows system tray, right-click the Bluetooth icon and select Stop the Bluetooth Device. The Bluetooth icon is blue in color with a red insert when Bluetooth is stopped. Create a ConnectionFrom the Bluetooth Icon in the System TrayIn the Windows system tray, right-click the Bluetooth icon, select Quick Connect and then the Bluetooth service that you wish to use.If this computer has created a connection to the desired type of service in the past, the options on the shortcut menu are:• The name(s) of any device(s) with which prior connections to this type of service have been established. Select a name from the list to re-establish connection.• Other Devices…Select this option to search for additional devices that potentially provide the desired service, select a device from the list, and then click Connect.If this computer has never created a connection to this type of service, the only option on the shortcut menu is “Find Devices….” Select this option to search for devices that potentially provide the desired service, select a device from the list, and then click Connect.Using the Bluetooth Setup Wizard• From the Folders pane of Windows Explorer, right-click My Bluetooth Places and select Bluetooth Setup Wizard or• In Windows Explorer, with My Bluetooth Places selected, from the Bluetooth menu, select Bluetooth Setup Wizard or• From the Windows system tray: right-click the Bluetooth icon and select Bluetooth Setup Wizard. Follow the wizard’s on-screen instructions.
18Find Bluetooth Devices Search for Devices looks for Bluetooth devices in the vicinity and displays the devices that it nds in My Bluetooth Places. To start a search for devices, in the Folders pane of My Bluetooth Places, select Entire Bluetooth Neighborhood, and then, from the Bluetooth menu, select Search for Devices. NOTE: The Bluetooth menu is only visible when My Bluetooth Places is active. Periodic Search for Devices Bluetooth can be congured to automatically search for devices on a regular basis (Bluetooth Conguration Panel > Discovery tab). One of the advantages of Bluetooth is the mobility that the wireless connections allow. However, mobility means that devices may move in or out of connection range during the time between the automatic updates performed by Bluetooth. To be certain that the displayed list of devices in the neighborhood is current, or if automatic periodic inquiry is not enabled, force an update of the device list using the technique described in Search for Devices, above. Some devices within connection range may not show up in the list of devices found because:• Your device is congured to report only specic types or classes of devices (Bluetooth Conguration Panel > Discovery tab, on your device).• The unlisted device is congured to be non-discoverable (Bluetooth Conguration Panel > Accessibility tab, on the un-listed device).From Entire Bluetooth Neighborhood From Windows Explorer:• In the Folders pane, select Entire Bluetooth Neighborhood, right-click a device name and select “Connect …” the desired service. or• In the Folders pane, expand Entire Bluetooth Neighborhood, select a device, and then, in the right pane, right-click a service provided by that device and select “Connect to…”Bluetooth Software Basic Operations (cont’d)
19Bluetooth Software Basic Operations (cont’d)Find A Service The process of determining the services that a device provides is called Service Discovery.To initiate a Service Discovery, in the Folders pane of My Bluetooth Places, right-click a device name and select Discover Available Services from the shortcut menu. Bluetooth services are those things that this computer can do for remote Bluetooth devices. For example, if this computer allows a remote Bluetooth device to send a fax using a fax modem that is physically attached to this computer, then this computer is providing the Bluetooth fax service.Some services are hardware dependant; this computer cannot provide the fax service unless it has a physical fax modem, for example. Some Bluetooth services use virtual “hardware.” The Bluetooth Serial Port service, for example, does not use a physical port on this computer. Instead, it creates virtual serial ports that Windows applications can see and use as if they were actual physical ports. Each Bluetooth service that this computer is capable of providing can be started automatically when Bluetooth starts. Each service can be setup to require security measures before allowing a remote Bluetooth device to connect. Bluetooth services require a Bluetooth application on the remote device; services and applications usually have coinciding names; i.e., there is a Bluetooth Fax Service and a Bluetooth Fax Application. The services supported by Bluetooth are:• Bluetooth Serial Port—a wireless connection between two devices. This connection can be used by applications as though a physical serial cable connected the devices.• Dial-up Networking—allows a device to use a modem that is physically attached to another Bluetooth device.• Fax—allows a device to send a fax using a remote Bluetooth cell phone, modem, or computer.• File Transfer—allows a device to perform le system operations on another Bluetooth device; browse, open, copy, etc.• Headset—allows a Bluetooth headset to be used as the audio input/output mechanism for another Bluetooth device, such as a computer or cell phone.• PIM Item Transfer—allows two Bluetooth devices to exchange Personal Information Manager data such as business cards, calendar items, email messages, and notes.
20Bluetooth Connection Status The Bluetooth Connection Status dialog box displays information about the state of a connection and provides a means to disconnect an active connection.Display the Connection Status dialog box: in My Bluetooth Places, from the Folders pane, select a device, and then, in the right pane of My Bluetooth Places, right-click a service name and select Status from the shortcut menu. The Information provided is:• Status: “Connected” or “Not Connected”• Device Name: the name of the device to which this computer is connected.• Duration: the length of time that this connection has been established, displayed in hours, minutes and seconds. Depending on the service, the connection may time out (automatically disconnect) after a specic period of inactivity.• Activity: the number of bytes sent and received over the connection.• Signal Strength: a graphic indicator that ranges from Too Weak through Good to Too Strong. The controls in the Bluetooth Connection Status dialog box are• Properties button: displays the Bluetooth Properties dialog box for this connection.• Disconnect button: closes this connection.• Close button: closes the Bluetooth Connection Status dialog box.Bluetooth Software Basic Operations (cont’d)• PIM Synchronization—allows two Bluetooth devices to synchronize Personal Information Manager data. • Network Access—allows a device to access a Local Area Network via a second Bluetooth device that is physically connected to the network or allows a remote device to become part of an ad hoc network provided by the Bluetooth server.• Audio Gateway—allows the microphone/speakers on Bluetooth device (typically a computer) to be used as the audio input/output mechanism for a remote Bluetooth device, such as a cell phone.All Bluetooth servers do not necessarily provide all of these services. For example, network gateways may provide only the Network Access service.NOTE: To change the power transmission level of this computer: from the Bluetooth Conguration Panel, Hardware tab, click the Advanced button, and then change the setting in the Maximum Power Transmission drop-down list. The Advanced button is not available in all countries.
21Bluetooth Software Basic Operations (cont’d)Send to Bluetooth This feature is used to send information to another Bluetooth device. Data types include:• Files from Windows Explorer• Documents from Microsoft Ofce applications, including:• Word• Excel• Access• PowerPoint.• Microsoft Outlook items, including:• Contacts• Appointments• Tasks• Messages• Notes. To use Send to Bluetooth1. In the application:a) Windows Explorer—select one or more les to be transferred. Folders cannot be transferred.b) Microsoft Ofce—only the document in the active window can be transferred.c) Microsoft Outlook—select one or more items to be transferred.2. From the application’s File menu, select Send To, and then select Bluetooth from the shortcut menu. Select a device from the shortcut menu to send the data or Select Other..., choose a device from the list, and then click OK to send the data.
22Bluetooth ConfigurationAccess the Bluetooth Conguration Panel The Bluetooth Conguration Panel provides access to settings for Bluetooth services, client applications, hardware, security, discovery, accessibility, default paths, event notication and other Bluetooth related items. To Open the Bluetooth Conguration Panel• From the Windows Control Panel, select Bluetooth Conguration or• In the Windows System Tray, right-click the Bluetooth icon, and select Advanced Conguration from the shortcut menu.Bluetooth Services versus Bluetooth Applications Bluetooth Services are services that this computer provides to remote Bluetooth devices. The Bluetooth services on this computer are referred to collectively in the Bluetooth conguration panel as “Local Services.”Bluetooth Applications are software applications on this computer that allow this computer to use the Bluetooth services that are provided by remote devices. The Bluetooth applications on this computer are referred to collectively in the Bluetooth conguration panel as “Client Applications.” Bluetooth Services and Bluetooth Applications usually have coinciding names; e.g., there is a File Transfer service and a File Transfer client application. How this computer provides a service to remote devices is congured on the Local Services tab of the Bluetooth conguration panel.How this computer uses a service that is provided by a remote device is congured on the Client Applications tab of the Bluetooth conguration panel.Bluetooth Exchange Folder This is the highest-level directory on this computer to which a remote Bluetooth device has access. Devices that have been granted access to this computer’s Bluetooth Exchange Folder also have access to all sub-folders contained within that folder and all les in those sub-folders.NOTE: The Bluetooth Exchange Folder is shared by the PIM Item Transfer and the File Transfer services and can be congured from the Properties page of either of those services. When the Bluetooth Exchange Folder is re-congured for either of these services, the other service will be updated to use the new location.
23 General Conguration Settings General Conguration Settings The settings on the General tab of the Bluetooth Conguration Panel determine information that is displayed to remote devices. Identity• Computer Name-enter a unique name to identify this computer to other Bluetooth devices in the vicinity; this eld cannot be left blank.• Computer type-select either Desktop or Laptop from the shortcut menu to set the type of icon remote devices will use to represent this computer. Bluetooth Applications Overview Some built-in Bluetooth applications provide full functionality for a specic task, such as locating other Bluetooth devices or synchronizing two Personal Information Managers. Other built-in Bluetooth applications provide a way for standard Windows applications to accomplish their tasks wirelessly. For example, a Bluetooth application may create a wireless serial connection between computers or provide wireless access to the Internet. The difference between Bluetooth Applications and Bluetooth Services• Bluetooth Applications are software programs on this computer that allow this computer to use the Bluetooth services that are provided by other devices. In the Bluetooth conguration panel, these programs are referred to collectively as “Client Applications.”• Bluetooth Services are software programs on this computer that provide a service to other devices. In the Bluetooth conguration panel, these programs are referred to collectively as “Local Services.”Note: Client Applications and Local Services usually have coinciding names; e.g., there is a Fax service and a Fax application.Bluetooth Configuration (cont’d)Applications > Overview
24 General Conguration All of the built-in Bluetooth applications allow you to rename the application and to require a secure connection when using the application. To access the conguration properties page for a built-in Bluetooth application:• In the Windows system tray, right-click the Bluetooth icon and select Advanced Conguration from the shortcut menu or• From the Windows control panel select Bluetooth Conguration or• From Windows Explorer, right-click Entire Bluetooth Neighborhood and select Properties from the shortcut menu. In the Bluetooth conguration panel, Client Applications tab, highlight the application to be congured, and then click Properties (or double-click the application).Bluetooth Configuration (cont’d) Human Interface Device Overview The Human Interface Device (HID) Application allows this computer to wirelessly use one or more remote Bluetooth HIDs as input/output devices. For example, the HID Application allows this computer to use a Bluetooth keyboard and a Bluetooth mouse. Important Note: The DBT-122 should work with most HID devices. Create a Bluetooth HID connectionOpen a connection to a Bluetooth Human Interface Device using one of these techniques:• From My Bluetooth Places• Using the Bluetooth Setup WizardOnce an HID connection is established, that connection will persist. If the computer is shut down, when the computer is turned on again the connection will re-establish automatically.NOTE: Some HIDs have multiple modes. Before establishing a connection, be sure the HID is in the desired mode. For example, in the case of an HID that can function as both a mouse and a laser pointer, be sure the mode switch is set to “Mouse” before attempting to connect.Applications > Human Interface Device (HID)
25 Close an HID connection Under normal circumstances, there is no reason to close an HID connection; once established the connection is maintained automatically, even during the power off and power on processes. If, for some reason, the connection must be closed: from My Bluetooth Places, right-click the service name and select Disconnect. When an HID connection is closed manually by the operator, the connection’s “persistence” is broken. The connection must be re-established manually, after which the connection will again persist until broken manually. Congure No conguration is necessary. Audio Gateway OverviewThe Audio Gateway Application allows a remote Bluetooth device to use this computer’s microphone and speakers as the remote device’s audio input and output devices. Create a Bluetooth Audio Gateway connection Open a connection to the Audio Gateway service that is provided by another Bluetooth device using one of these techniques:• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup Wizard Close an audio gateway connection: If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Audio Gateway and then select the device that is providing the service (active connections have a checkmark in front of them). or No matter how the connection was created, in My Bluetooth Places, right- click the service name and select Disconnect. Bluetooth Configuration (cont’d)Applications > HID, Audio GatewayNOTE: HIDs usually have a button, which is sometimes difcult to nd, that must be pressed before other Bluetooth devices can locate the HID. Even after the button is pressed, the HID can only be discovered for a limited time, and then the button must be pressed again. The time period can be as short as 30 seconds or as long as 180 seconds. Read the documentation that accompanies the HID before you attempt to connect to the device.
26 Congure The Bluetooth Conguration Panel > Client Applications > Audio Gateway > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Bluetooth Serial Port The Bluetooth Serial Port application allows this computer to establish a wireless serial connection with a remote Bluetooth device. The applications on both this computer and the remote device must be congured to send and receive data to and from the respective communications port (COM port) assigned to the Bluetooth serial port. The wireless serial connection may then be used by the applications as though a physical serial cable connected the devices. Create a Bluetooth Serial Port connection Establish a connection using one of these techniques• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup Wizard Close a Bluetooth Serial Port connection• If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Bluetooth Serial Port and then select the device that is providing the service (active connections have a checkmark in front of them). or• No matter how the connection was created, In My Bluetooth Places, right-click the service name and select Disconnect.Congure The Bluetooth Conguration Panel > Client Applications > Bluetooth Serial Port > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.• The communications port (COM port) to be used. NOTE: Unless you have a specic reason to do so, DO NOT CHANGE the default COM Port setting.Bluetooth Configuration (cont’d)Applications > Serial Port
27 Dial-up Networking Overview The Bluetooth Dial-up Networking application allows this computer to use a modem that is physically connected to a remote device to access the Internet, and log on to a remote network. Open a connection to the Dial-up Networking service that is provided by another Bluetooth device using one of these techniques:• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup WizardAfter the Bluetooth dial-up networking connection is established it can be used the same way as any other networking connection. For example, you can open a browser and explore the World Wide Web, if the remote computer has Internet access. Close a Dial-up Networking connection• If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Dial-up Networking and then select the device that is providing the service (active connections have a checkmark in front of them). or• No matter how the connection was created, In My Bluetooth Places, right-click the service name and select Disconnect.CongureThe Bluetooth Conguration Panel > Client Applications > Dial-up Networking > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.• The Bluetooth virtual device to be used. Bluetooth Configuration (cont’d)NOTE: Unless you have a specic reason to do so, DO NOT CHANGE the default Bluetooth device or alter the device’s conguration.Applications > Dial-up Networking
28 Fax Overview The Bluetooth Fax service allows this computer to send a fax using a Fax/ Modem that is physically connected to a remote device. To Send a Fax1. Open a connection to the Fax service that is provided by another Bluetooth device, using one of these techniques:• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup Wizard2. Open or create the document to be faxed and select the “Print,” “Send to Fax Recipient” or similar command that is available in most applications. Close a Fax Connection Fax connections close automatically when the Fax transmission is complete. Congure The Bluetooth Conguration Panel > Client Applications > Fax > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Headset Overview The Headset application allows this computer to use a Bluetooth headset (or any other device that offers the Bluetooth headset service) as the audio input and output device for this computer. Possible uses include:• If this computer has on-board telephone hardware, a Bluetooth headset might be used as the audio input/output device to make/receive telephone calls.• If this computer has voice recognition capabilities, a Bluetooth headset might be used as the audio input device. Any other scenario that requires audio input/output can potentially take advantage of a Bluetooth headset to replace a hardwired microphone and/or speakers. Bluetooth Configuration (cont’d)Applications > Fax, Headset
29Hands-Free Prole (HFP)OverviewThe Hands-Free Prole (HFP) denes how two devices that support HFP will interact on a point-to-point basis. With HFP, a headset or any other Hands-Free embedded unit can connect wirelessly to a cellular phone to act as the cellular phone’s audio input and output mechanism. HFP applied in this way also allows typical telephone functions to be performed without the need to access the actual phone. The Hands-Free AG (Audio Gateway) role can be used as the source side of the HFP connection. It can be used to connect with a Hands-Free device, like a Bluetooth headset.Two roles are dened for this application:An Audio Gateway (AG) is a device that is the source of the audio, both for input and output. Cellular phones are a typical AG role device.A Hands-Free (HF) unit is a device acting as an Audio Gateway’s remote audio input and output mechanism. Units in an HF role also provide some remote control capabilities over AG devices.Create a Headset connection Establish a connection using one of these techniques:• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup WizardNOTE: Most Bluetooth headsets “ring” when a connection is attempted; answer the ring to complete the connection and begin using the headest as the audio input/output device for this computer.Close a Headset connection• If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Headset and then select the device that is providing the service (active connections have a checkmark in front of them). OR• No matter how the connection was created, in My Bluetooth Places, right-click the service name and select Disconnect.Applications > HeadsetBluetooth Configuration (cont’d)
30 CongureThe Bluetooth Conguration Panel > Client Applications > Headset > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box. File Transfer Overview The Bluetooth File Transfer application allows this computer to perform le operations on the Bluetooth Exchange Folder (and the folders and les it contains) of a remote device. Copy to/from a remote device In the Folders pane of Windows Explorer, from the Entire Bluetooth Neighborhood branch, select a device and expand that branch to view the Bluetooth Exchange Folder of the remote device.Bluetooth Configuration (cont’d)Applications > Headset, File TransferNOTE: If “Public Folder” is not available, the remote device is not congured to allow remote le operations.NOTE: Using A2DP and HFP, a user can listen to music playing on a PC without missing VoIP phone calls received by the same PC. When a VoIP phone call comes in, music will be paused automatically while the user answers the phone call using the Bluetooth stereo headset. The music stream will then resume automatically after the VoIP phone call is completed.
31 Use drag-and-drop to copy any le or folder contained in the Public Folder of the remote device to the desired folder on this computer. You can also drag-and-drop les or folders from this computer to the Public Folder (and its sub-folders) of the remote device. Other le operations Right-click a le or folder in the remote device’s Public Folder for a context sensitive menu. All potential menu options may not be available at all times. Potential menu options include:• Open—opens the selected le on this computer, using the default application for this type of le.• Print—sends the selected le to this computer’s default printer.• Send To• 3 ½ oppy (A)—the 3 ½ inch oppy drive on this computer• Bluetooth Exchange Folder—the Bluetooth Exchange Folder on this computer.• Rename—applies only to empty folders; le names and the names of folders that contain objects cannot be changed using this technique.• Cut, Copy, Paste, Delete, Refresh, View & New—standard Windows functions. Congure The Bluetooth Conguration Panel > Client Applications > File Transfer > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.Bluetooth Configuration (cont’d)Applications > File Transfer (cont’d)
32 Network Access Overview The Bluetooth Network Access application makes it possible for this computer:• To connect to a Local Area Network via a physical connection on a remote Bluetooth device. or• To connect to an ad hoc network provided by a remote Bluetooth device. The type of network connection that is available is determined by the conguration of the remote Bluetooth device. Create a Network Access connection Establish a connection using one of these techniques• Windows system tray, Bluetooth icon• From My Bluetooth Places• Using the Bluetooth Setup Wizard Close a Network Access connection• If the connection was established via the Bluetooth icon in the Windows system tray; click the Bluetooth icon, select Quick Connect, Network Access and then select the device that is providing the service (active connections have a checkmark in front of them). or• No matter how the connection was created, In My Bluetooth Places, right-click the service name and select Disconnect. Congure The Bluetooth Conguration Panel > Client Applications > Network Access > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.Bluetooth Configuration (cont’d)Applications > Network Access
33 PIM Synchronization Overview The PIM Synchronization Application is used to synchronize the Personal Information Manager (PIM) database of this computer with the PIM database of a remote Bluetooth device. The supported PIMs are:• Microsoft Outlook• Microsoft Outlook Express• Lotus Notes. The supported data types are:• Business cards• Calendar items• Email (with or without attachments)• Notes.Congure PIM Synchronization The Bluetooth Conguration Panel > Client Applications > PIM Synchronization > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.• The PIM items to be synchronized and the PIM on this computer • The data item types which can be synchronized are:• Business cards• Calendar items• Email (with or without attachments-see below)• Notes Possible synchronization options for each of these data item types include:• Do Not Synchronize-this item type will not be synchronizedBluetooth Configuration (cont’d)NOTE: If synchronization is enabled for a specic item type, but is not enabled for that item type on the remote device, synchronization WILL NOT take place for that item.Applications > PIM
34 PIM Item Transfer OverviewThe Bluetooth PIM Item Transfer application allows this computer to send and receive Personal Information Manager items to-and-from a remote Bluetooth device. Item transfer can be accomplished several ways: To send, receive or exchange business cards:1. From Windows Explorer, My Bluetooth Places, right-click the PIM Item Transfer service on a remote device and select the appropriate option. or In the Windows system tray, right-click the Bluetooth icon, select Quick Connect > Business Card Exchange, select a device from the list, select the appropriate option from the shortcut menu, and then click OK.Bluetooth Configuration (cont’d)• Synchronize Microsoft Outlook-this item type will be synced with its matching entry in Microsoft Outlook, regardless of the PIM that contains this entry on the remote device. If a matching Outlook entry does not exist, it will be created• Synchronize Outlook-Express-this item type will be synced with its matching entry in Express, regardless of the PIM that contains this entry on the remote device. If a matching Express entry does not exist, it will be created• Synchronize Lotus Notes-this item type will be synced with its matching entry in Lotus Notes, regardless of the PIM that contains this entry on the remote device. If a matching Notes entry does not exist, it will be created.• Email attachments. The only option is include or do not include attachments with email that is sent or received on this computer using this service.NOTE: All choices are not available for all items. For example, “Note” items can only be synchronized in Microsoft Outlook, therefore Lotus Notes and Outlook Express do not appear as options in the “Notes” item shortcut menu. Personal Information Managers that are not installed on this computer do not appear as options in the shortcut menus.Applications > PIM (cont’d)
35Bluetooth Configuration (cont’d)2. From Windows Explorer, My Bluetooth Places, highlight the PIM Item Transfer service on a remote device, and then, from the Bluetooth menu on the Windows menu bar, select the appropriate action. In addition to the business card options listed above, you can also send Notes (*.vnt), Email (*.vmg) and Calendar (*.vcs) items from this menu.3. From within a supported Personal Information Manager, select one or more items and then, from the PIM’s File menu, select Send to Bluetooth. Whether sent items are accepted by the remote device is determined by how the remote device’s PIM Item Transfer service is congured. Close a PIM Item Transfer Connection This application closes the open connection automatically when its task is complete.Congure PIM Item Transfer The Bluetooth Conguration Panel > Client Applications > PIM Item Transfer > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box.• How your business card is handled when it is requested by a remote device. The Send My Business Card options are: Choose a business card as needed-each time a remote device requests your business card you must select a card from your PIM. If you ignore the request the remote device will receive a timeout notice. Always send the same business card-when this option is selected a dialog appears that allows you to set a default business card, which will be sent automatically when requests are received.• Where to store received business cards. The Received Business Cards options are:• Microsoft Outlook• Outlook Express• Lotus Notes• Email attachments (only option is to include or not include) Applications > PIM (cont’d)
36Bluetooth Configuration (cont’d)Advanced Audio Distribution Prole (A2DP) OverviewThe Bluetooth Advanced Audio Distribution Prole (A2DP) application allows a computer to use Bluetooth for distribution of high quality audio content in mono or stereo on ACL channels. A typical application of A2DP is for streaming music content from a stereo music player or PC to headphones or speakers. Users can enjoy high-quality music on a Bluetooth stereo headset receiving streaming music from the DBT-122 dongle via a PC.A2DP denes the protocol for audio streaming while the Video Distribution Prole (VDP) denes video streaming. So, to gain both high quality audio and video, you need Bluetooth devices which support both A2DP and VDP.Two roles are dened for this application: An A2DP Source is a device, such as a Bluetooth MP3 or PDA, providing the source of a digital audio stream for delivery to an A2DP Sink. An A2DP Sink is a device, such as a Bluetooth headset or stereo speakers, receiving a digital audio stream provided by an A2DP Source. Some devices can operate in both roles, although not simultaneously. For example, the speakers on a PC can be used as an A2DP Sink to play music transmitted from an A2DP Source such as a Bluetooth MP3 player. Applications > PIM (cont’d)NOTE: The selected Received Business Cards option does not inuence the settings on other PIM-related property pages. For example, even if the PIM Item Transfer service business card option on this computer is congured to “Do Not Accept,” the PIM Item Transfer application will still accept business cards that the application has specically requested via its “Receive” or “Exchange” functions.Applications > My Headset / Audio Gateway
37Bluetooth Configuration (cont’d)Video Distribution Prole (VDP)OverviewThe Bluetooth Video Distribution Prole (VDP) application denes how a Bluetooth enabled device streams video content using ACL channels. A typical application of VDP is for streaming stored video playback from a PC media center to a portable player or streaming from a digital video camera to a TV. Users can watch streaming video playback using the DBT-122 dongle via a PC.VDP denes the protocol for video streaming while A2DP denes high quality audio streaming. So, for high quality audio and video, your Bluetooth devices should support both VDP and A2DP.Two roles are dened for this application: A VDP Source is a device, such as a Bluetooth enabled digital video camera, providing the source of a digital video stream for delivery to a VDP Sink. A VDP Sink is a device, such as a Bluetooth enabled PC, receiving a digital audio stream provided by an VDP Source.CongureThe Bluetooth Conguration Panel > Client Applications > My Headset / Audio Gateway > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable a secure connection, Applications > My Headset / Audio Gateway (cont’d)Conversely, a PC can also be used as an A2DP Source to, for example, transmit music to a Bluetooth headset.CongureThe Bluetooth Conguration Panel > Client Applications > My Headset / Audio Gateway > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable a secure connection, place a check mark in the box.
38Bluetooth Configuration (cont’d)Basic Printing Prole (BPP)OverviewThe Basic Printing Prole (BPP) denes how a Bluetooth device can send print job requests to a Bluetooth enabled printer without the need for device-specic printer drivers. Common applications of BPP include printing e-mail messages, short messages (SMS), and formatted documents. Optional support for the printing of structured data objects such as vCard and vCalendar entries is also dened, as well as methods for negotiating the use of other formats supported by the printer.The Basic Printing Prole allows a Bluetooth enabled printer to act as a print server to accept objects pushed by a sender, for example a PDA or a mobile phone, and print out the result.Two roles are dened for this application: A Printer is a server device used as an object exchange server. A Sender is the client device that pushes an object to the Printer BPP also species two types of print service: Direct Printing and Reference Printing. For Direct Printing jobs or services, the content to be printed is stored on the Sender. For Reference Printing jobs or services, the content to be printed is stored on the network and referenced by the Sender in queuing a print request. The Printer’s main task is to accept a print request of either type from a Sender, queue it, and print the content.CongureThe Bluetooth Conguration Panel > Client Applications > My Printer > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable a secure connection, place a check mark in the box.Applications > Printer
39Bluetooth Configuration (cont’d) Printer Overview The Bluetooth Printer application allows this computer to use a Bluetooth printer. Once a Bluetooth printer has been properly installed, it can be used from this computer in the same way as any other printer would be. Congure The Bluetooth Conguration Panel > Client Applications > Printer > General tab provides options to congure:• The application name—to change it, highlight the existing name and enter the new name.• Enable or disable secure connection. To enable secure connection, place a checkmark in the box. Install a Bluetooth Printer Option One:1. Perform a search for devices and then, from Entire Bluetooth Neighborhood, right-click a Bluetooth printer, select Add Printer from the shortcut menu and follow the on-screen instructions. 2. When the wizard asks you to select a printer make and model, do so. If your printer is not in the list of options, click Have Disk…, insert the driver disk for the printer, and then navigate to the drive and directory that contains the driver initiation le (*.inf) for the printer.3. To complete the installation, follow the on-screen instructions.Applications > Printer (cont’d) Option Two:1. From the Windows Control Panel, select Printers > Add Printer > Next > Local printer > Next.2. On the Select the Printer Port screen of the wizard:a) Select Create a new portb) In the Type shortcut menu, select Bluetooth Printer Port, and then click Next.3. On the next screen, select the printer by name, and then click Connect.
40Bluetooth Configuration (cont’d) Option Two (continued):4. Install the driver: when asked to select a printer make and model, do so. If your printer is not in the list of options, click Have Disk…, insert the driver disk for the printer, and then navigate to the drive and directory that contain the driver initiation le (*.inf) for the printer.5. To complete the installation, follow the on-screen instructions. Delete a printer:Click Start > Settings > Printers, right-click the printer to be deleted, and then select Delete from the shortcut menu. OrIn Entire Bluetooth Neighborhood, right-click an installed Bluetooth printer and select Delete Printer from the shortcut menu. Service Common Conguration Settings These properties can be set individually for each Bluetooth service:• Service Name-the default name of each service can be changed.• Secure Connection-requires that remote devices provide proof of identity and that all data be encrypted.• Startup Automatically-starts the service automatically when Bluetooth is started.• Notications-provides visual and/or audio notication that a remote device is attempting to connect (or has connected) to a service on this computer.Applications > Printer (cont’d)Bluetooth Services
41Bluetooth Configuration (cont’d) Notications Overview There are three types of notication:• Authentication request, also called a PIN code request—this notication appears automatically in a balloon over the Windows system tray if a Personal Identication Code is required before a connection can proceed. An audio le can also be associated with the notication.• Authorization request, also called a connection request—this type of notication can be visual, audio, or both. It noties you of attempts to access a Bluetooth service on this computer; the connection will not proceed until you click the balloon that appears over the Windows system tray. If the notication balloon is ignored, the connection request will time out and fail.• Notication only—this type of notication does not effect access in any way; it is solely for information purposes to let you know that a connection has been established. ExampleBoth Authentication and Authorization request notications are controlled by whether Secure Connection is enabled for an individual service.An example of how notications might work when a remote device attempts to access a service on this computer, if all notications are enabled:1. Authentication: a balloon notication (audio optional) appears to prompt for a PIN code. If the PIN code does not match the code entered on the remote device, the connection will not be allowed. Once the remote device has been authenticated this notication will not appear again, unless the paired relationship is broken and the devices must re-pair.2. Authorization: a balloon notication appears and/or a sound le provides audio notication that a remote device is attempting to access a Bluetooth service on this computer. Click the balloon to proceed. A dialog box appears that offers the option of letting the connection proceed this time only or to always allow this particular remote device to use the service it is attempting to access.3. Once a connection has been authorized, an additional visual and/or audio notication may appear (if enabled). This notication is for information only to inform the operator that a connection has been established.Services > Notications
42Bluetooth Configuration (cont’d)After two devices are paired (step 1, above), the authentication notication will no longer appear when a connection is attempted. If “Always allow…” is enabled during the authorization process (step 2, above), the authorization notication will not appear on future connection attempts. Connection notication (step 3, above) only happens if it has been enabled Service Access Notication“Notications” lets you associate a sound (Windows *.wav le) and/or a visual indication with access attempts by remote devices. A different notication sound can be associated with each local Bluetooth service. Associate a sound with service access From the Bluetooth Conguration Panel, Local Services tab:1. Double-click a service name and then select the Notications tab.2. Check the desired options; visual and sound may both be selected for a single event.3. Choose a sound; click the Browse button and navigate to the sound le (*.wav) to be used for notication. Audio Gateway The Bluetooth Audio Gateway service allows this computer to use a remote Bluetooth device’s microphone and speakers as this computer’s input and output devices. For example, if this computer has voice recognition capabilities, a Bluetooth headset might be used as the audio input device. Hardware Requirements• The Bluetooth radio on both this computer and the remote device must support audio. • The remote device handles both audio input and output for this computer; therefore, this computer does not require a sound card, microphone, or speakers. Congure the Audio Gateway Service From the Windows system tray, right-click the Bluetooth icon, select Advanced Conguration > Local Services, and then double-click the Audio Gateway service. Set the common conguration properties of the service, and then click OK.Services > Audio Gateway Service
43 Bluetooth Serial Port The Bluetooth Serial Port service allows a remote Bluetooth device to establish a wireless serial connection with this computer. The wireless serial connection may be used by applications as though a physical serial cable connected the devices. To establish a Bluetooth Serial Port connection The connection must be initiated from the remote device by the Bluetooth Serial Port application. Determine the communications port being used by this computer for the Bluetooth Serial PortIn the Windows system tray, right-click the Bluetooth icon, select Advanced Conguration, and then the Local Services tab. The COM port assigned to this service is the last item in the Bluetooth Serial Port service row. Congure the application on this computer that will use this service to send its data to this COM. Add a Bluetooth Serial Port The Bluetooth Serial Port service has one pre-congured Bluetooth Serial Port, but additional Bluetooth Serial Ports can be added as needed. To add a port1. From the Bluetooth Conguration Panel, Local Services tab, click Add Serial Service.2. In the properties dialog box, modify the properties.3. Enter a unique name (less than 99 alphanumeric characters).4. Select secure connection, if desired.5. Select Startup Automatically, if desired.6. From the COM Port shortcut menu select a communications port that is not assigned to any other service.7. Click OK. To remove a Bluetooth Serial PortFrom the Bluetooth Conguration Panel, Local Services tab, select the port to be removed and then click Delete.NOTE: The Delete button is only available when a Bluetooth Serial Port is selected.Bluetooth Configuration (cont’d)Services > Bluetooth Serial Port Service
44 Dial-up Networking Service The Bluetooth Dial-up Networking service makes it possible for a remote Bluetooth device to use a modem that is physically connected to this computer. The remote device can then access the Internet or log on to a remote network. Congure the Dial-up Networking service: From the Windows system tray, right-click the Bluetooth icon, select Advanced Conguration > Local Services, and then double-click the Dial-up Networking service.• Select the physical modem to be used from the Modems: shortcut menu.• Set the common conguration properties of the service, and then click OK. Fax ServiceThe Fax service allows a remote Bluetooth device to send a Fax via a modem that is physically attached to this computer. Congure the Fax service: From the Windows system tray, right-click the Bluetooth icon, select Advanced Conguration > Local Services, and then double-click the Fax service.• Select the physical modem to be used from the Modems: shortcut menu.• Set the common conguration properties of the service, and then click OK. File Transfer Service The File Transfer service allows this computer to perform le operations on the Bluetooth Exchange Folder (and the folders and les it contains) of a remote device. Basic setup procedure Right-click the Bluetooth icon and select Explore My Bluetooth Places. Congure Windows Explorer so that the Folders pane is visible (View > Explorer Bar > Folders). In the Folders pane, select Entire Bluetooth Neighborhood and then, on the menu bar, select Bluetooth > Search For Devices. In the Folders pane, expand Entire Bluetooth Neighborhood to show the devices in the vicinity. Copy to/from a remote deviceIn the Folders pane of Windows Explorer, from the Entire Bluetooth Neighborhood branch, select a device and expand that branch to view the Bluetooth Exchange Folder of the remote device.Bluetooth Configuration (cont’d)Services > Dial-up, Fax, File Transfer Service
45 Use drag-and-drop to copy any le or folder contained in the Public Folder of the remote device to the desired folder on this computer. You can also drag-and-drop les or folders from this computer to the Public Folder (and its sub-folders) of the remote device. Other le operations Right-click a le or folder in the remote device’s Public Folder for a context sensitive menu. All potential menu options may not be available at all times. Potential menu options include:• Open—opens the selected le on this computer, using the default application for this type of le.• Print—sends the selected le to this computer’s default printer.• Send To• 3 ½ oppy (A)—the 3 ½ inch oppy drive on this computer• Public Folder on My Device—the Public Folder on this computer.• Rename—applies only to empty folders; le names and the names of folders that contain objects cannot be changed using this technique.• Cut, Copy, Paste, Delete, Refresh, View & New—standard Windows functions. Headset Service The Bluetooth Headset Service allows this computer to provide audio input/ output for remote Bluetooth devices. For example, if the remote device is a Bluetooth telephone, this computer’s microphone and speakers can be used as speakerphone input and output for that device. Hardware Requirements• This computer must have a sound card, microphone, and speakers installed.• The Bluetooth radio on both on this computer and the remote device must support audio. Congure the Headset Service• From the Windows system tray, right-click the Bluetooth icon, select Advanced Conguration > Local Services, and then double-click the Headset service.• Set the common conguration properties of the service, and then click OK.NOTE: “Public Folder” is not available, the remote device is not congured to allow remote le operations.Bluetooth Configuration (cont’d)Services > Headset
46 Network Access The Bluetooth Network Access service makes it possible for a remote Bluetooth device to access a Local Area Network that is physically attached to this computer or allows a remote device to become part of an ad hoc network provided by this computer.After this computer has been congured to provide the Network Access service to other Bluetooth devices, it will not be able to use the Bluetooth Network Access service provided by another Bluetooth device without being re-congured. Put another way, this computer cannot be both a Bluetooth Network Access server and a Bluetooth Network Access client at the same time. Setup for Windows 98SE & Windows MeNOTE: Internet Protocol routing software is required on Windows 98SE and Windows Me servers. Install and congure the routing software as instructed by the software’s manufacturer. Congure the server:1. From the Windows Control Panel, double-click the Network icon.2. On the Conguration tab, select TCP/IP-> Bluetooth LAN Access Server Driver (scroll down if necessary).3. Click Properties and select the IP Address tab.a) Select Specify an IP addressb) Enter an IP Address (suggested value—192.168.1.1)c) Enter a Subnet Mask (suggested value—255.255.255.0)4. Click OK twice to close the dialog boxes and then click YES to restart the computer. Setup for Windows 2000 and Windows XP If Internet Connection sharing was previously enabled (before BTW was installed) it must be disabled and then re-enabled before the Bluetooth network adapter can use it. Congure for Network Access:1. From the Windows system tray, right-click the Bluetooth icon and select Advanced Conguration from the shortcut menu.2. In the Bluetooth conguration panel, select the Local Services tab, Network Access and then click Properties....3. From the Network Access, General properties page, in the Type of service shortcut menu, select “Allow other devices to access the Internet/LAN via this computer,” and then click Congure Connection Sharing.Bluetooth Configuration (cont’d)Services > Network Access
474. Right-click Local Area Connection, select Properties and then select the Sharing tab.5. Select Enable Internet Connection Sharing for this connection, click OK, and then click YES in the conrmation dialog box. Congure for Group Ad Hoc Networking:1. From the Windows system tray, right-click the Bluetooth icon and select Advanced Conguration from the shortcut menu.2. In the Bluetooth conguration panel, select the Local Services tab, Network Access and then click Properties....3. From the Network Access, General properties page, in the Type of service shortcut menu, select “Allow other devices to create a private network with this computer.”4. Click OK. PIM Item Transfer Overview The PIM Item Transfer service allows Personal Information Manager items to be transferred between this computer and a remote Bluetooth device. Four data types are supported:• Business Cards• Calendar Items• Email Messages• Notes Each data type can be saved in any of the supported and installed PIMs. NOTE: PIMs which are not installed on this computer will not appear in the shortcut menus. When the PIM that is associated with an individual data type is changed on the PIM Item Transfer page, that data type is also changed for the PIM Synchronization service. (Continued on the next page)Bluetooth Configuration (cont’d)Services > Network Access, PIM
48 Bluetooth Configuration (cont’d) Congure In addition to the conguration options common to all Bluetooth services, this service also has settings that determine:• How business card requests are handled. The options are:• Never send my business card—ignore the request.• Choose a business card as needed—when prompted, select a business card to be sent to the requester.• Always send the same business card—when a request is received always send the same business card. When this option is selected, a dialog box appears from within which an installed Personal Information Manager (if more than one is installed on this computer) and an existing business card can be selected.• Previously sent business cards—once a card is selected using the “Always send the same business card” option, above, that card will be added to the shortcut menu as an option.NOTE: Previously sent business card additions to the menu are limited to ten, after which the oldest contact will be replaced.• Where to store inbound data items, on an individual basis. Options include (not all options apply to all items):• Do Not Accept• Any of the installed PIMs on this computer• Save to Folder• The Bluetooth Exchange Folder location—the directory on this computer where inbound items that are not to be saved in a PIM will be kept. NOTE: This is also the folder where the File Transfer service stores inbound items. If this folder is recongured here, it will also be recongured in that service automatically.• Whether to send/receive attachments with email. Check or clear this option, as appropriate. Close a PIM Item Transfer connection PIM Item Transfer connections close automatically when the data transfer is complete.Services > PIM (cont’d)
49Bluetooth Configuration (cont’d)Default Business Card Selection When the “Always send the same business card” option is selected, a dialog box appears to allow the selection of a default business card.The rst time the dialog box appears it provides a way to choose the Personal Information Manager that stores the default business card. Click the down-arrow in the PIM shortcut menu and select the PIM to be used. On subsequent appearances of this dialog box, the PIM selection option is not available. Change the selected PIM On the PIM Item Transfer properties page, “Received items” section, there is a Business Cards shortcut menu. When a PIM was selected during initial setup the selected item in this menu was set to the same PIM. To change the PIM used for the default business card, open this shortcut menu and select a new PIM.NOTE: A new default business card must be selected from the database of the newly selected PIM. Choose a default business card1. In the Select a Bluetooth Business Card dialog box that appears when “Always send the same business card” is selected, highlight the card. NOTE: Once a card is highlighted, if you “hover” the mouse pointer over that selection, a balloon appears with additional information about that contact.2. Click OK to choose a highlighted business card and return to the PIM Item Transfer Properties page. The chosen contact now appears in, and is selected in, the “Business card requests” shortcut menu. If the “Always send the same business card” option is selected again, and a different contact chosen, the properties page will display both contacts in the shortcut menu. NOTE: In addition to the default menu options, the shortcut menu can hold up to ten contact names.Services > PIM (cont’d)
50Bluetooth Configuration (cont’d)Services > PIM (cont’d) PIM Synchronization The PIM Synchronization service can be used by a remote device to synchronize its Personal Information Manager (PIM) database with the PIM database of this computer. Four data types are supported:• Business cards• Calendar items• Email messages• Notes Whether an individual item is accepted and where it is stored, when accepted, is congured in the PIM Item Transfer service. If that service is not congured to store a particular data type in Outlook, then that data type cannot be synchronized.NOTE: Data types that will be synchronized must be saved in the PIM database (this is congured in the PIM Item Transfer service); otherwise, that data type will not be available for selection (it will be grayed out) in the PIM Synchronization conguration settings. Microsoft Outlook permits duplicate entries, so all duplicates may not be exchanged in the synchronization process.NOTE: Only Outlook’s default contacts folder is synchronized. Items in sub- folders are not synchronized. Items that are moved from the default folder to a sub-folder will appear to have been deleted the next time synchronization takes place.
51Hardware Settings The Hardware tab of the Bluetooth Conguration Panel provides basic information about the Bluetooth hardware installed on this computer and access to the Advanced Settings dialog box, if required:• Devices:• Name: the name of the device, e.g., WIDCOMM Bluetooth Device• Type: the type of device, e.g., USB.• Device Properties:• Device status: indicates that the device is operating properly or that there is a problem/conict.• Manufacturer: the name of the company that manufactured the device selected in the Devices section of this dialog box.• Firmware Revision: the manufacturer’s rmware version number.• Device Address: the Bluetooth Device Address (BDA or BD_Addr) assigned to this device when it was manufactured.• HCI Version: the version number of the Bluetooth Specication that the Host Controller Interface complies with.• HCI Revision: the revision number of the Bluetooth Specication that the Host Controller Interface complies with.• LMP Version: the version number of the Bluetooth Specication that the Link Manager Protocol complies with.• LMP Sub Version: the sub-version number of the Bluetooth Specication that the Link Manager Protocol complies with.• The Advanced button: displays the Advanced Settings dialog box, which allows you to select the country code and transmission power settings. This option is not available on all systems.Bluetooth Configuration (cont’d)
52Advanced Settings When available, this dialog box is reached from the Hardware tab of the Bluetooth Conguration Panel. NOTE: Depending on the country in which the hardware is sold and/or in which it will be used, the Advanced button may not be present. From this dialog box you can set the:• Country Code:• North America, Europe (except France), and Japan• France and China• Maximum Transmission Power:• High• Medium• Low Click Apply to implement the changes. A dialog box appears with notication that the Bluetooth device attached to this computer must be reset before the change(s) will take effect. Click Yes to reset the Bluetooth device now—all open Bluetooth connections will be closed. Click No to save the changes—the changes will be applied the next time the Bluetooth device is reset or restarted.Bluetooth Configuration (cont’d)
53Accessibility SettingsThe Accessibility tab of the Bluetooth Conguration Panel lets you specify whether remote devices may access this computer, which remote devices have access, and whether an audio warning is played when a Personal Identication Number (PIN code) is required. Allow other devices to discover this computer Select “Let other Bluetooth devices discover this computer” to permit remote Bluetooth devices to nd and report this computer. If “Allow No devices” (below) is selected, this option is not available. Control the types of devices that are allowed to connect to this computer From the “Devices allowed to connect to this computer” shortcut-menu, select:• No devices—no remote devices are permitted to initiate a connection with this computer. However, this computer can still initiate connections with remote Bluetooth devices.• All devices—all remote devices are permitted to connect to this computer. Connections are subject to additional security restrictions, such as authentication and authorization, that may be required by the individual services provided by this computer.• Only paired devices—only devices that have been paired with this computer are allowed to connect to it.• Only devices listed below—only the listed devices are allowed to connect to this computer (see Accessibility, adding and deleting devices). Choose an audio notication leWhen Secure Connection is enabled for any of the Bluetooth Services on his computer a PIN code is required before that service can be accessed. To chose a notication sound that will play when a remote device attempts to access a service that requires a secure connection, click Select audio le... and select the sound (*.wav) le to be played. Limit access to this computer to specic remote devices From the Bluetooth Conguration Panel, Accessibility tab, in the Allow shortcut menu, select “Only devices listed below”.Bluetooth Configuration (cont’d)
54 Add a device to the list1. Click Add Device.2. In the Devices with access... dialog box select the desired device(s) and click OK. NOTE: Multiple devices may be selected using SHIFT + click and/or CTRL + click. Delete a device from the list In the list of devices allowed to access this computer, select the device to be removed from the list, and then click Delete. Discovery Settings The settings on the Discovery tab of the Bluetooth Conguration Panel determine whether this computer looks for other Bluetooth devices automatically, how often it looks and what type of devices it looks for. Periodic Search for DevicesWhen “Look for other Bluetooth devices” is selected, Bluetooth automatically searches for devices every X minutes. X is an whole number between 1 and 60. To change the time between auto inquiries, highlight the existing time and enter the new time.NOTE: When My Bluetooth Places is rst opened it performs an initial automatic search for devices even if “Look for other Bluetooth devices” is not enabled. Determine the devices that will be reported Bluetooth can screen out devices that you do not need access to. The options are:• Report all Bluetooth devices.• Report only selected Bluetooth devices (see Discovery, Adding Specic Devices and Discovery, Deleting Specic Devices).• Select the desired option from the drop-down list.Bluetooth Configuration (cont’d) Accessibility Settings (cont’d)
55 Discover Specic Devices The type of device(s) that this computer looks for and reports when it is searching for other Bluetooth devices can be limited. Limit the remote devices reported Bluetooth can report only specic devices, specic class(es) of device(s), or specic type(s) of device(s) within a class. • Specic devices: an individual computer or Bluetooth cellular telephone are examples of specic devices.• Specic class of device: “computer” is an example of a class of devices.• Specic type of device within a class: “laptop” is an example of a specic type of device within the “computer” class of devices.The devices to be discovered can be mixed-and-matched; you can discover one or more specic devices, classes of devices and types of devices within a class at the same time. Remove a device from the list of devices to be discovered In the Bluetooth Conguration Panel, from the Discovery tab, select the device to be removed and click the Delete button.NOTE: If “Report only selected Bluetooth devices” is not selected the Delete button will not be available. Temporarily override the discovery of specic devices In the Bluetooth Conguration Panel, from the Discovery tab, select “Report all Bluetooth devices.” The specically selected devices will be discovered along with all other devices. To re-enable specic device discovery re-select “Report only selected Bluetooth devices.”NOTE: When all devices are deleted an error message will appear if “Report all bluetooth devices” is not selected.Bluetooth Configuration (cont’d) Discovery Settings (cont’d)
56Security Authentication Authentication is used to verify identity; it requires a passkey or link key from the remote device. When a remote device attempts access, a visual and/or audio warning noties the local operator. If the notication is ignored, access is denied after a preset timeout. When devices are “paired,” those devices automatically exchange a link key and Authentication is carried out without operator intervention. AuthorizationAuthorization is Yes-or-No security that requires operator intervention to avoid having the connection time out and fail. Authorization is limited to:• Yes, you may connect (click the balloon to proceed).• No, you may not connect (ignore the balloon prompt and the connection will fail). Bluetooth Device Identity Every Bluetooth device has a unique Bluetooth Device Address (BDA) assigned to it during the manufacturing process. This address cannot be changed by the end-user. A device’s BDA is usually displayed in hexadecimal format; 00:D0:B7:03:2E:9F is a valid BDA.Each Bluetooth device also has an operator-congurable, user-friendly name to help distinguish it from other devices. The user-friendly name may be up to 99 alphanumeric characters in length and may contain spaces. My Personal Computer is a valid user-friendly name. Encryption Encrypting data translates it into an unreadable format using a secret key or password. Decrypting the data requires the same key or password that was used to encrypt it. Link Key A unique, internally generated, access code based on a passkey, the Bluetooth Device Address and an internally generated random number. Link keys are generated automatically when devices Pair. After a link key is generated, manual entry of the passkey is not required.
57 Pairing Devices Pairing allows you to avoid entering access information each time a connection is attempted. Paired devices share a unique link key, which they exchange each time they connect. NOTE: The mate of a pair always appears in My Bluetooth Places, even if the mate is not turned on or is out of connection range.Paired devices remain paired even when• One of the devices is not on• A service connection is interrupted or the service stopped• One or both devices are rebooted. To Pair with another device If Secure Connection is enabled, devices will pair automatically the rst time they connect (a passkey must be successfully exchanged). To pair with a device manually: In the Folders pane of My Bluetooth Places, right-click a device, select Pair Device from the shortcut menu, and then follow the on-screen instructions. Remove Pairing In the Folders pane of My Bluetooth Places, right-click a paired device and select Unpair Device from the shortcut menu. Passkey An alphanumeric string up to 16 characters in length. Passkeys are also called Personal Identication Numbers, or PIN codes. A passkey may be required if the Secure Connection option is enabled for a Bluetooth service or application. Secure ConnectionA passkey or link key is required each time a connection is attempted. All data exchanged over the Bluetooth connection is encrypted. Depending on other conguration options, authorization may also be required. Security Request Dialog Box A Bluetooth passkey request and/or Bluetooth Authorization request balloon may appear over the Windows system tray when a connection is attempted if Secure Connection is enabled. Click the balloon to proceed.Security (cont’d)
58Troubleshooting Cannot connect to a paired device Paired devices are always displayed in My Bluetooth Places, even if the remote device is out of range or not powered up. Verify that the remote member of the pair is within radio range, and powered up, and then attempt the connection again. Cannot discover services on an unpaired remote device The remote device may not be powered up or may be out of range.• Verify that the remote device is powered up.• Verify that the remote device is in Connectable mode (Bluetooth Conguration Panel > Accessibility tab).• Perform a Search for Devices to verify that the device is within range. Dial-up Networking service does not start The Dial-up Networking service will not start unless a properly congured modem is attached to the server. • Verify that the modem is usable as a local device on the computer to which it is attached.• In the Bluetooth Conguration Panel, Local Services tab, double-click the Dial-up Networking service.• Click the down arrow in the Modem eld and select the modem that will be used to dial out.• Click the OK button.• Click the OK button to close the Bluetooth Conguration Panel.
59 Determine the version of the Link Manager Protocol (LMP)In the Bluetooth Conguration Panel, on the Hardware tab, in the Device Properties section, the seventh entry provides Link Manager Protocol version number information. The eighth entry contains the Link Manager Protocol sub-version number information, if appropriate.Troubleshooting (cont’d) Determine the version of the Host Controller Interface (HCI)In the Bluetooth Conguration Panel, on the Hardware tab, in the Device Properties section, the fth entry provides Bluetooth Specication compliance information for the Host Controller Interface. The sixth entry contains the Specication Revision information for the Host Controller Interface, if appropriate. Determine the Bluetooth Device Address (BDA) of my hardware deviceIn the Bluetooth Conguration Panel, on the Hardware tab, in the Devices section, select the device you want to determine the address of. In the Device Properties section of the dialog box, the fourth entry, Device Address, is the BDA of the selected Bluetooth device. Find information about the Bluetooth hardware attached to my computer In the Bluetooth Conguration Panel, select the Hardware tab. Internet Connection Sharing Does Not Work This occurs because Internet Connection Sharing was enabled when Bluetooth was installed (this is a Microsoft Windows behavior and is considered proper operation). To resolve the “problem”:1. Disable Sharing for the Ethernet adapter: a) Windows Control Panel > Network and Dial-up Connections. b) Right-click “Local Area Connection,” select Properties, and then select the Sharing tab.c) Clear (uncheck) the box for “Enable Internet Connection Sharing for this connection” and click OK.
60Troubleshooting (cont’d) Unknown Port message when using a Bluetooth Serial Port The “Unknown Port” error message usually means an attempt was made to connect a port that was in use. Additional Bluetooth Serial Ports can be added if they are required. Bluetooth Headset Doesn’t Always Function Under WIN 98 Windows 98 cannot convert audio les with the extension m3u (e.g., myle.m3u) into the Pulse Code Modulation (PCM) audio format used by Bluetooth headsets; this is a limitation of Windows 98. Other versions of Windows (2000, ME and XP) can translate m3u audio les into the PCM format. Possible solutions are:• Upgrade to a newer version of Windows.• Use an m3u-to-mp3 conversion utility to convert the le(s) into a format that is supported by Windows 98. (Conversion utilities are available as freeware or shareware on the Internet.) Internet Connection Sharing Does Not Work2. Re-enable Sharing for the Ethernet adapter; repeat Step 1.c.), and select (check) the sharing box. If offered an option to select an adapter, select “Bluetooth network adapter.” (This option will not appear unless more than one adapter is available.) If asked to reboot the computer, do so. Test a Network Access connectionIf the client is hardwired to the LAN, unplug the hardwired connection to ensure that the test checks the wireless connection rather than the hardwired connection. If the server has access to the Internet, open a browser on the client and connect to the World Wide Web. You may also Ping the server from the DOS prompt.
61© 2006 D-Link Corporation. All rights reserved.Reproduction in any manner whatsoever without the written permission of D-Link Corporation is strictly forbidden.Trademarks used in this text: D-Link and the D-Link logo are trademarks of D-Link Corporation/D-Link Systems Inc.; Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. D-Link Corporation disclaims any proprietary interest in trademarks and trade names other than its own.Information in this document is subject to change without notice.FCC WarningThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, any changes or modications not expressly approved by the party responsible for compliance could void the user’s au-thority to operate this equipment. (Example - use only shielded interface cables whenconnecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.CE Mark WarningThis is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.••••
62IC Radiation Exposure StatementOperation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device.Important Note: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating in-structions for satisfying RF exposure compliance. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Technical SupportYou can nd software updates and user documentation on the D-Link website.D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a weekD-Link Technical Support over the Internet:http://support.dlink.comemail:support@dlink.comTech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 7:30am to 12:00am ESTD-Link Technical Support over the Internet:http://support.dlink.caemail:support@dlink.caTech Support for customers within the United Kingdom & Ireland:D-Link UK & Ireland Technical Support over the Telephone:+44 (0)845 612 0003 (United Kingdom)+353 (0)12 421 061 (Ireland)Monday to Friday 8:00 am to 10:00 pmD-Link Technical Support over the Internet:http://www.dlink.co.uk

Navigation menu