D Link AP2310B1 AirPremier N Access Point/Wireless N Access Point User Manual

D Link Corporation AirPremier N Access Point/Wireless N Access Point Users Manual

Users Manual

DAP-2310(P)DAP-2310無線基地台
2D-Link DAP-2310 User ManualTable of ContentsProduct Overview .............................................................. 4Package Contents ......................................................................... 4System Requirements ................................................................. 4Introduction ................................................................................... 5Features ............................................................................................ 7Wireless Basics ................................................................... 8Standards-Based Technology ................................................... 9Wireless Installation Considerations ....................................10Hardware Overview ...................................................................11LEDs .........................................................................................11Hardware Overview ...................................................................12Connections .........................................................................12Five Operational Modes ..................................................13Getting Started ................................................................14Conguration ...................................................................15Save and Activate Settings ......................................................16Basic Settings ...............................................................................17Wireless .................................................................................17Access Point mode ........................................................17WDS with AP mode ......................................................19WDS mode .......................................................................21Wireless Client mode ....................................................23AP Repeater mode.........................................................25Open System/Shared Key Authentication ...........26WPA/WPA2-Personal Authentication ......................27WPA/WPA2-Enterprise Authentication ..................28802.1x Authentication ..................................................29LAN .........................................................................................30IPv6 ..........................................................................................31Advanced Settings .....................................................................32Performance .........................................................................32Multi-SSID ..............................................................................34VLAN ........................................................................................36VLAN List ...........................................................................36Port List ..............................................................................37Add/Edit VLAN ................................................................38PVID Setting .....................................................................39Intrusion .................................................................................40Schedule ................................................................................41Internal RADIUS Server .....................................................42ARP Spoong Prevention Settings ...............................43Bandwidth Optimization .................................................44AP Array ..................................................................................46AP Array Scan ..................................................................47Conguration Settings .................................................48Auto-RF ..............................................................................49Load Balance ...................................................................50Captive Portal ......................................................................51Authentication Settings - Ticket ...............................51Authentication Settings - User/Password .............52Table of Contents
3D-Link DAP-2310 User ManualTable of ContentsAuthentication Settings - Remote RADIUS ...........53Authentication Settings - LDAP ................................54Authentication Settings - POP3 ................................55Login Page Upload .............................................................56Web Redirection ..................................................................57DHCP Server ........................................................................58Dynamic Pool Settings .................................................58Static Pool Setting .........................................................60Current IP Mapping List ...............................................62Filters .......................................................................................63Wireless MAC ACL ..........................................................63WLAN Partition ...............................................................64Trac Control .......................................................................65Uplink/Downlink Settings ..........................................65QoS ......................................................................................66Trac Manager ...............................................................67Status .............................................................................................68Device Information ............................................................68Client Information ..............................................................69WDS Information ................................................................70Stats .........................................................................................71Ethernet .............................................................................71WLAN Trac ....................................................................72Log ...........................................................................................73View Log ............................................................................73Log Settings .....................................................................74Maintenance ...............................................................................75Administration Settings ...................................................75Limit Administrator .......................................................76System Name Settings .................................................77Login Settings .................................................................78Console Settings ............................................................79SNMP Settings ................................................................80Central WiFiManager Settings ...................................81Firmware and SSL Certication Upload ..............................82Conguration File Upload .......................................................83Time and Date .............................................................................84System ....................................................................................85System Settings ..............................................................85Help .................................................................................................86Troubleshooting ..............................................................87Networking Basics ...........................................................87Check your IP address ...............................................................87Statically Assign an IP address ...............................................89Technical Specications ..................................................92
4D-Link DAP-2310 User ManualSection 1 - Product OverviewD-Link DAP-2310 D-Link DAP-2310(P) 無線基地台AirPremier® Access Point / Wireless N Access PointCAT5 Ethernet CableTwo Detachable AntennasPower AdapterCD-ROM with User ManualInstall GuideSystem Requirements• Computers with Windows®, Macintosh®, or Linux-based operating systems with an installed Ethernet Adapter• For conguration, the following web browsers are supported: • Microsoft® Internet Explorer® 6.0 and higher • Mozilla Firefox 3.0 and higher • Google™ Chrome 2.0 and higher • Apple Safari 3.0 and higherProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DAP-2310 will cause damage and void the warranty for this product.
5D-Link DAP-2310 User ManualSection 1 - Product OverviewIntroductionThe DAP-2310 802.11n AP increases productivity by allowing you to work faster and more eciently. With the DAP-2310, bandwidth-intensive applications like graphics or multimedia will benet signicantly because large les are now able to move across the network quickly.The DAP-2310 is capable of operating in one of four dierent wireless networking modes: Access Point, WDS (Wireless Distribution System) with AP, WDS, Wireless Client mode or AP Repeater mode.An ideal solution for quickly creating and extending a wireless local area network (WLAN) in oces or other workplaces, trade shows, and special events, the DAP-2310 provides data transfer rates up to 300Mbps. (The 802.11n standard is backwards compatible with 802.11g and 802.11b devices.) WPA/WPA2 is oered in two options: Enterprise (used for corporations) and Personal (used for home users). WPA-Personal and WPA2-Personal are directed towards home users who do not have the server-based equipment required for user authentication. This method of authentication is similar to WEP because you dene a “Pre-Shared Key” on the wireless router/AP. Once the pre-shared key is conrmed and satised at both the client and access point, access is then granted. The encryption method used is referred to as the Temporal Key Integrity Protocol (TKIP), which oers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were not tampered with during wireless transmission. WPA-Enterprise and WPA2-Enterprise are ideal for businesses that already have existing security infrastructures established. Management and security implementation can now be centralized on a server participating on the network. Utilizing 802.1X with a RADIUS (Remote Authentication Dial-in User Service) server, a network administrator can dene a list of authorized users who can access the wireless LAN. When attempting to access a wireless LAN with WPA-Enterprise congured, the new client will be requested to enter a username with a password. If the new client is authorized by the administration, and enters the correct username and password, then access is granted. In the case where an employee leaves the company, the network administrator is able to remove the previous employee from the authorized list to avoid compromising the network.
6D-Link DAP-2310 User ManualSection 1 - Product OverviewEAP (Extensible Authentication Protocol) is available through the Windows® XP operating system. You will need to use the same type of EAP protocol on all devices in your network when using the 802.1X feature.*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead can lower actual data throughout rate.
7D-Link DAP-2310 User ManualSection 1 - Product Overview• Five dierent operation modes - Capable of operating in one of four dierent operation modes to meet your wireless networking needs: Access Point, WDS with AP, WDS, Wireless Client or AP Repeater mode.• Faster wireless networking with the 802.11n standard to provide a maximum wireless signal rate of up to 300 Mbps*.• Compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps, allowing you to migrate your system to the 802.11n and 802.11g standards on your own schedule without sacricing connectivity.• Compatible with the 802.11g standard to provide a wireless data rate of up to 54Mbps in the 2.4GHz frequency range.• Better security with WPA - The DAP-2310 can securely connect wireless clients on the network using WPA (Wi-Fi Protected Access) to provide a much higher level of security for your data and communications than its previous versions.• Central WiFiManager management software - The real-time display of the network's topology and AP’s information makes network conguration and management quick and simple.• SNMP for management - The DAP-2310 is not just fast, but also supports SNMP v.3 for better network management. Superior wireless AP manager software is bundled with the DAP-2310 for network conguration and rmware upgrade. Systems administrators can also set up the DAP-2310 easily with the Web-based conguration. • Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).• Supports one 10/100/1000M Ethernet port.• Operates in the 2.4 ~ 2.4835GHz frequency ranges.• Web-based interface for managing and conguring.*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead can lower actual data throughout rate.Features
8D-Link DAP-2310 User ManualSection 2 - InstallationWireless BasicsD-Link wireless products are based on industry standards to provide high-speed wireless connectivity that is easy to use within your home, business or public access wireless networks. D-Link wireless products provides you with access to the data you want, whenever and wherever you want it. Enjoy the freedom that wireless networking can bring to you.WLAN use is not only increasing in both home and oce environments, but in public areas as well, such as airports, coee shops and universities. Innovative ways to utilize WLAN technology are allowing people to work and communicate more eciently. Increased mobility and the absence of cabling and other types of xed infrastructure have proven to be benecial to many users. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, allowing wireless users to use the same applications as those used on a wired network.People use WLAN technology for many dierent purposes:Mobility - productivity increases when people can have access to data in any location within the operating range of their WLAN. Management decisions based on real-time information can signicantly improve the eciency of a worker.Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benet from WLAN's ease of implementation. WLANs can operate in locations where installation of wiring may be impractical.Installation and network expansion - by avoiding the complications of troublesome cables, a WLAN system can be fast and easy during installation, especially since it can eliminate the need to pull cable through walls and ceilings. Wireless technology provides more versatility by extending the network beyond the home or oce.Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network devices. The DAP-2310 saves money by providing users with multi-functionality congurable in four dierent modes.Scalability - Congurations can be easily changed and range from Peer-to-Peer networks, suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed.
9D-Link DAP-2310 User ManualSection 2 - InstallationStandards-Based TechnologyThe DAP-2310 Wireless Access Point utilizes the 802.11b, 802.11g, and 802.11n standards.The IEEE 802.11n standard is an extension of the 802.11b and 802.11g standards that came before it. It increases the maximum wireless signal rate up to 300Mbps* within the 2.4GHz bands, utilizing OFDM technology.This means that in most environments - within the specied range of this device - you will be able to transfer large les quickly, or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then simultaneously transmitted at dierent frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DAP-2310 will automatically sense the best possible connection speed to ensure the greatest possible speed and range.IEEE 802.11n oers the most advanced network security features available today, including WPA.*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead can lower actual data throughout rate.
10D-Link DAP-2310 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link AirPremier® N wireless access point lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the access point and other network devices to a minimum. Each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters). Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle, it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a dierence. A solid metal door or aluminum studs may have a negative eect on the range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
11D-Link DAP-2310 User ManualSection 2 - InstallationHardware OverviewLEDs1Power LED This light will be solid green when the unit is powered on.2WLAN LED This light will be ickering green when the 2.4GHz frequency is in use.3LAN LED This light will be ickering green when there is active LAN trac.123
12D-Link DAP-2310 User ManualSection 2 - InstallationConnectionsHardware Overview1 2 31LAN Port Connects the DAP-2310 to a switch or PC. 2Reset Reset the Access Point. 3Power Receptor Receptor for Power Adapter.
13D-Link DAP-2310 User ManualSection 2 - InstallationFive Operational ModesWireless Client AP Repeater AP acts as a wireless network adapter for your Ethernet-enabled deviceAP acts as repeater to extend to wireless coverage.Access Point (AP) Create a wireless LANWDS with AP Wirelessly connect multiple networks while still functioning as a wireless APWDS Wirelessly connect multiple networks
14D-Link DAP-2310 User ManualSection 2 - InstallationGetting Started1. Connect the power adapter to the receptor on the rear panel of the DAP-2310 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation.2. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-2310 and the other end of the cable to a switch or router’s LAN port . Note: You can also connect the DAP-2310 directly to the computer that will be used for conguration. The LAN LED will illuminate to indicate a proper Ethernet connection.3. Computers with 802.11 b/g/n wireless adapters can connect to the DAP-2310.LANRESET12V1A12LANRESET12V1AorDAP-2310SwitchMonitorDesktop
15D-Link DAP-2310 User ManualSection 3 - CongurationCongurationTo congure the DAP-2310, use a computer that is connected to the DAP-2310 with an Ethernet cable (see the Network Layout diagram).Launch your web browser. Type the IP address of the DAP-2310 in the address eld (http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-2310 and your computer are in the same subnet.Note: If you have changed the default IP address assigned to the DAP-2310, make sure to enter the correct IP address. Enter the user name (admin) and your password. Leave the password eld blank by default and click Login.Note: If you have changed the password, make sure to enter the correct password.
16D-Link DAP-2310 User ManualSection 3 - CongurationAfter successfully logging into the DAP-2310, the following screen will appear:When making changes on most of the conguration screens in this section, use the button at the bottom of each screen to save (not activate) your conguration changes.You may change settings to multiple pages before activating. Once you are nished, click the Conguration button located at the top of the page and then click Save and Activate.Save and Activate Settings
17D-Link DAP-2310 User ManualSection 3 - CongurationBasic SettingsWireless Access Point modeSelect Access Point from the drop-down menu. The other three choices are WDS with AP, WDS, and Wireless Client.Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. The SSID can be up to 32 characters and is case-sensitive.Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users. This feature is enabled by default. Enabling this feature automatically selects the channel that provides the best wireless performance. Enable is set by default. The channel selection process only occurs when the AP is booting up.All devices on the network must share the same channel. To change the channel, rst toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings.Mode:Network Name (SSID):SSID Visibility:Auto Channel Selection:Channel:Wireless Band: Select 2.4GHz from the drop-down menu.
18D-Link DAP-2310 User ManualSection 3 - CongurationChannel Width:Authentication:Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz allows you to connect to both 802.11n and 802.11b/g wireless devices on your network.Use the drop-down menu to choose Open System, Shared Key, WPA-Personal, WPA-Enterprise, or 802.11x.Select Open System to communicate the key across the network.Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.Select 802.1x to secure your network using 802.1x authentication.
19D-Link DAP-2310 User ManualSection 3 - CongurationWDS with AP mode Select 2.4GHz from the drop-down menu. WDS with AP mode is selected from the drop-down menu.Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users.Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS with AP mode. The channel selection process only occurs when the AP is booting up.To change the channel, use the drop-down menu to make the desired selection. (Note: The wireless adapters will automatically scan and match the wireless settings.) Indicates whether the device is capable of 20MHz operation only or both 20MHz and 40MHz operation.Wireless Band:Mode:Network Name (SSID):SSID Visibility:Auto Channel Selection:Channel:Channel Width:In WDS with AP mode, the DAP-2310 wirelessly connects multiple networks while still functioning as a wireless AP.
20D-Link DAP-2310 User ManualSection 3 - CongurationEnter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.Select Open System to communicate the key across the network.Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this option is not available. Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.Remote AP MAC Address:Site Survey:Authentication:
21D-Link DAP-2310 User ManualSection 3 - CongurationWDS modeIn WDS mode, the DAP-2310 wirelessly connects multiple networks, without functioning as a wireless AP.WDS is selected from the drop-down menu.Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users.Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in WDS mode.All devices on the network must share the same channel. To change the channel, use the drop-down menu to make the desired selection.Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz.Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.Mode:Network Name (SSID):SSID Visibility:Auto Channel Selection:Channel:Channel Width:Remote AP MAC Address:Wireless Band: Select 2.4GHz from the drop-down menu.
22D-Link DAP-2310 User ManualSection 3 - CongurationClick on the Scan button to search for available wireless networks, then click on the available network that you want to connect with. Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.Select Open System to communicate the key across the network.Select Shared Key to limit communication to only those devices that share the same WEP settings.Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.Site Survey:Authentication:
23D-Link DAP-2310 User ManualSection 3 - CongurationWireless Client modeWireless Band:Mode:Network Name (SSID):SSID Visibility:Auto Channel Selection:Channel:Channel Width:Site Survey:Select 2.4GHz from the drop-down menu. Wireless Client is selected from the drop-down menu.Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network.This option is unavailable in Wireless Client mode.Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in Wireless Client mode.The channel used will be displayed, and matches the AP that the DAP-2310 is connected to when set to Wireless Client mode.Use the drop-down menu to choose 20 MHz or Auto 20/40 MHz.Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with.Use the drop-down menu to choose Open System or WPA-Personal.
24D-Link DAP-2310 User ManualSection 3 - CongurationSelect Open System to communicate the key across the network.Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.Check to enable clone MAC. This feature will allow you to change the MAC address of the access point to the MAC address of a client.Select the MAC source from the drop-down menu.Enter the MAC address that you would like to assign to the access point.Authentication:Enable:MAC Source:MAC Address:
25D-Link DAP-2310 User ManualSection 3 - CongurationAP Repeater modeMode:Network Name (SSID):SSID Visibility:Auto Channel Selection:Channel:Channel Width:Site Survey:Authentication:Wireless Band: 2.4 GHz AP Repeater is selected from the pull-down menu.Service Set Identier (SSID) is the name designated for a specic wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network.This option is unavailable in AP Repeater mode.Enabling this feature automatically selects the channel that will provide the best wireless performance. This feature is not supported in AP Repeater mode.The channel used will be displayed, and matches the AP that the DAP-2310 is connected to when set to AP Repeater mode.Use the pull-down menu to choose 20 MHz or Auto 20/40 MHz.Click on the Scan button to search for available wireless networks, then click on the available network that you want to connect with.Use the pull-down menu to choose Open System or WPA-Personal.Select Open System to communicate the key across the network.Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
26D-Link DAP-2310 User ManualSection 3 - CongurationOpen System/Shared Key Authentication Encryption:Key Type*:Key Size:Key Index (1-4):Key:Use the radio button to disable or enable encryption.Select HEX or ASCII.Select 64 Bits or 128 Bits.Select the 1st through the 4th key to be the active key.Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu.**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127.
27D-Link DAP-2310 User ManualSection 3 - CongurationWPA/WPA2-Personal AuthenticationWhen WPA-Personal is selected for Authentication type, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use dierent algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2.When you select WPA-Personal, you must also select AUTO, AES, or TKIP from the drop-down menu.Select the interval during which the group key will be valid. The default value of 1800 is recommended.Select Manual to enter your key (PassPhrase). You can select Periodical Key Change to have the access point automatically change your PassPhrase. Enter the Activate From time and the time in hours to change the key.When you select WPA-Personal, please enter a PassPhrase in the corresponding eld.WPA Mode: Cipher Type:Group Key Update:Periodical Key Change:PassPhrase:
28D-Link DAP-2310 User ManualSection 3 - CongurationWPA/WPA2-Enterprise AuthenticationWhen WPA-Enterprise is selected, you must also select a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use dierent algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. When WPA-Enterprise is selected, you must also select a cipher type from the drop-down menu: Auto, AES, or TKIP.Select the interval during which the group key will be valid. The recommended value is 1800. A lower interval may reduce data transfer rates.Enable or disable Microsoft Network Access Protection.Enter the IP address of the RADIUS server.Enter the RADIUS port.Enter the RADIUS secret.WPA Mode: Cipher Type:Group Key Update Interval:Network Access Protection:RADIUS Server:RADIUS Port:RADIUS Secret:
29D-Link DAP-2310 User ManualSection 3 - Conguration802.1x AuthenticationSelect the interval during which the group key will be valid (300 is the recommended value). A lower interval may reduce data transfer rates.Enter the IP address of the RADIUS server.Enter the RADIUS port.Enter the RADIUS secret.Key Update Interval: RADIUS Server:RADIUS Port:RADIUS Secret:
30D-Link DAP-2310 User ManualSection 3 - CongurationStatic IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-2310. When Dynamic IP (DHCP) is selected, the other fields here will be grayed out. Please allow about two minutes for the DHCP client to be functional once this selection is made. The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network.Enter the subnet mask. All devices in the network must share the same subnet mask.Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within the range of your network.Enter the DNS IP address used here.LAN Get IP From:IP Address:Subnet Mask:Default Gateway:DNS: LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2310. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
31D-Link DAP-2310 User ManualSection 3 - CongurationCheck to enable the IPv6.Auto is chosen here. Choose this option the DAP-2310 can get IPv6 address automatically or use Static to set IPv6 address manually. DAP-2310. When Auto is selected, the other elds here will be grayed out.Enter the LAN IPv6 address used here.Enter the LAN subnet prefix length value used here.Enter the LAN default gateway IPv6 address used here. Enable IPv6:Get IP From: IP Address:Prex:Default Gateway:IPv6
32D-Link DAP-2310 User ManualSection 3 - CongurationAdvanced SettingsPerformance*Maximum wireless signal rate derived from IEEE Standard 802.11n and 802.11g specications. Actual data throughput may vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead can lower actual data throughout rate.Wireless:Wireless Mode:Data Rate*:Use the drop-down menu to turn the wireless function On or O.The different combination of clients that can be supported include Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only. Please note that when backwards compatibility is enabled for legacy (802.11g/b) clients, degradation of 802.11n wireless performance is expected. Indicate the base transfer rate of wireless adapters on the wireless LAN. The AP will adjust the base transfer rate depending on the base rate of the connected device. If there are obstacles or interference, the AP will step down the rate. This option is enabled in Mixed 802.11g and 802.11b mode. The choices available are Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
33D-Link DAP-2310 User ManualSection 3 - CongurationBeacons are packets sent by an access point to synchronize a wireless network. Specify a value in milliseconds. The default (100) is recommended. Setting a higher beacon interval can help to save the power of wireless clients, while setting a lower one can help a wireless client connect to an access point faster.Select a Delivery Trac Indication Message setting between 1 and 15. The default value is 1. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or 12.5%.WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over a Wi-Fi network.To eectively optimize throughput over long distance links, enter a value for Acknowledgement Time Out from 64 to 200 microseconds in the 2.4 GHz in the eld provided. Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the error rate in some installations due to increased sensitivity to radio-frequency installations.Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an IGMP host based on IGMP messages passing through the AP.Select Enable or Disable. This is an option for load balancing. This determines whether to limit the number of users accessing this device. The exact number is entered in the User Limit eld below. This feature allows the user to share the wireless network trac and the client using multiple APs. If this function is enabled, when the number of users exceeds this value, the DAP-2310 will not allow clients to associate with the AP.Set the maximum amount of users that are allowed access (0-64 users). To use this feature, the Connection Limit above must be enabled. For most users, a limit of 10 is recommended. The default setting is 20.Select the multicast rate for 2.4G band. The choices available are 130,117,78,65,58.5,54, 52,48, 39,36, 26,24, 19.5,18, 13,12, 9, 6.5,6, 11, 5.5, 2 or 1. Beacon Interval (25-500):DTM Interval (1-15):Transmit Power:WMM (Wi-Fi Multimedia):Ack Time Out (2.4 GHZ, 64~200) : Short GI:IGMP Snooping:Connection Limit:User Limit (0-64): Multicast Rate for 2.4G Band
34D-Link DAP-2310 User ManualSection 3 - CongurationThe device supports up to four multiple Service Set Identiers. In the Basic > Wireless section, you can set the Primary SSID. The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Check to enable support for multiple SSIDs.This read-only value is the current band setting. You can select up to three multi-SSIDs. With the Primary SSID, you have a total of four multi-SSIDs.Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network.Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all network users.The Multi-SSID security can be Open System, WPA-Personal, WPA-Enterprise, or 802.1x. For a detailed description of the Open System parameters, please go to page 25. For a detailed description of the WPA-Personal parameters, please go to page 26. For a detailed description of the WPA-Enterprise parameters, please go to page 27. For a detailed description of the O802.1x parameters, please go to page 28. Enable Multi-SSID:Band: Index:SSID:SSID Visibility:Security:Multi-SSID
35D-Link DAP-2310 User ManualSection 3 - CongurationCheck the Enable Priority box at the top of this window to enable. Select the priority from the drop-down menu.Select Enable or Disable.When you select Open System, toggle between Enable and Disable. If Enable is selected, the Key Type, Key Size, Key Index (1~4), Key, and Conrm Keys must also be congured.Select HEX or ASCII.Select 64 Bits or 128 Bits.Select from the 1st to 4th key to be set as the active key.Input up to four keys for encryption. You will select one of these keys in the Key Index drop-down menu. When you select either WPA-Personal or WPA-Enterprise, you must also choose a WPA mode from the drop-down menu: AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use dierent algorithms. AUTO (WPA or WPA2) allows you to use both WPA and WPA2. In addition, you must congure Cipher Type and Group Key Update Interval. Select Auto, AES, or TKIP from the drop-down menu.Select the interval during which the group key will be valid. The default value of 1800 seconds is recommended.When you select WPA-Personal, please enter a PassPhrase in the corresponding eld.When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item in the corresponding eld.When you select WPA-Enterprise, enter the IP address of the RADIUS server. In addition, you must congure RADIUS Port and RADIUS Secret. Enter the RADIUS port.Enter the RADIUS secret.Priority:WMM (Wi-Fi Multimedia):Encryption: Key Type:Key Size:Key Index (1-4):Key:WPA Mode:Cipher Type:Group Key Update Interval:PassPhrase:Conrm PassPhrase:RADIUS Server:RADIUS Port:RADIUS Secret:
36D-Link DAP-2310 User ManualSection 3 - CongurationVLANVLAN ListThe DAP-2310 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary Multiple SSID, and WDS connection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-2310 without a VLAN tag will have a VLAN tag inserted with a PVID.The VLAN List tab displays the current VLANs.Use the radio button to toggle between Enable or Disable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. VLAN Status:
37D-Link DAP-2310 User ManualSection 3 - CongurationPort ListThe Port List tab displays the current ports. If you want to congure the guest and internal networks on a Virtual LAN (VLAN), the switch and DHCP server you are using must also support VLANs. As a prerequisite step, congure a port on the switch for handling VLAN tagged packets as described in the IEEE 802.1Q standard.Use the radio button to toggle to Enable. Next, go to the Add/Edit VLAN tab to add or modify an item on the VLAN List tab. The name of the port is displayed in this column.The Tagged VID is displayed in this column.The Untagged VID is displayed in this column.The Port VLAN Identifier is displayed in this column.VLAN Status:Port Name:Tag VID:Untag VID:PVID:
38D-Link DAP-2310 User ManualSection 3 - CongurationAdd/Edit VLANThe Add/Edit VLAN tab is used to congure VLANs. Once you have made the desired changes, click the Save button to let your changes take eect.Use the radio button to toggle to Enable. Provide a number between 1 and 4094 for the Internal VLAN.Enter the VLAN to add or modify.VLAN Status:VLAN ID:VLAN Name:
39D-Link DAP-2310 User ManualSection 3 - CongurationPVID SettingThe PVID Setting tab is used to enable/disable the Port VLAN Identier Auto Assign Status as well as to congure various types of PVID settings. Click the Save button to let your changes take eect.Use the radio button to toggle between Enable and Disable. Use the radio button to toggle PVID auto assign status to Enable.VLAN Status:PVID Auto Assign Status:
40D-Link DAP-2310 User ManualSection 3 - CongurationIntrusionThe Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take eect.The choices include All, Valid, Neighbor, Rogue, and New. Click this button to initiate a scan of the network.AP List:Detect:
41D-Link DAP-2310 User ManualSection 3 - CongurationScheduleThe Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Save button to let your changes take eect.Use the drop-down menu to enable the device’s scheduling feature. Enter a name for the new scheduling rule in the eld provided.Select the index from the drop-down menu.Enter the name of your wireless network (SSID).Toggle the radio button between All Week and Select Day(s). If the second option is selected, check the specic days you want the rule to be eective on.Check this box to have your settings apply 24 hours a day.Enter the start time for your rule. If you selected All Day, this option will be greyed out.Enter the end time for your rule.Click to add the rule to the list. This section will display the list of created schedules.Click the Save button to save your created rules.WirelessSchedule:Name:Index:SSID:Day(s):All Day(s):Start Time:End Time:Add:Schedule Rule List:Save:
42D-Link DAP-2310 User ManualSection 3 - CongurationInternal RADIUS ServerThe DAP-2310 features a built-in RADIUS server. Once you have nished adding a RADIUS account, click the Save button to let your changes take eect. The newly-created account will appear in this RADIUS Account List. The radio buttons allow the user to enable or disable the RADIUS account. Click the icon in the delete column to remove the RADIUS account. We suggest you limit the number of accounts below 30.Enter a name to authenticate user access to the internal RADIUS server.Enter a password to authenticate user access to the internal RADIUS server. The length of your password should be 8~64.Toggle the drop-down menu between Enable and Disable.Displays the list of users. User Name:Password:Status:RADIUS Account List:
43D-Link DAP-2310 User ManualSection 3 - CongurationARP Spoong Prevention SettingsThe ARP Spoong Prevention feature allows users to add IP/MAC address mapping to prevent arp spoong attack.This check box allows you to enable the arp spoong prevention function. Enter a gateway IP address. Enter a gateway MAC address. ARP Spoong Prevention:Gateway IP Address:Gateway MAC Address:
44D-Link DAP-2310 User ManualSection 3 - CongurationBandwidth OptimizationThe Bandwidth Optimization window allows the user to manage the bandwidth of the device and arrange the bandwidth for various wireless clients. When the Bandwidth Optimization ruile is nished, click the Add button. To discard the Add Bandwidth Optimization Rule settings, click the Clear button. Click the Save button to let your changes take eect.Use the drop-down menu to Enable the Bandwidth Optimization function. Enter the downlink bandwidth of the device in Mbits per second.Enter the uplink bandwidth of the device in Mbits per second.Use the drop-down menu to select the type that is applied to the rule. Available options are: Allocate average BW for each station, Allocate maximum BW for each station, Allocate dierent BW for 1a/b/g/n stations, and Allocte specic BW for SSID. AP will distribute average bandwidth for each client.Specify the maximum bandwidth for each connected client. Reserve certain bandwidth for future clients.The weight of 11b/g/n and 11a/n client are 10%/20%/70% ; 20%/80%. AP will distribute dierent bandwidth for 11a/b/g/n clients. Enable Bandwidth Optimization:Downlink Bandwidth:Uplink Bandwidth:Rule Type:Allocate average BW for each station:Allocate maximum BW for each station: Allocate dierent BW for a/b/g/n stations:
45D-Link DAP-2310 User ManualSection 3 - CongurationAllocate specic BW for SSID:Band:SSID Index:Downlink Speed:Uplink Speed:All clients share the total bandwidth.Use the drop-down menu to toggle the wireless band between 2.4GHz and 5GHz.Use the drop-down menu to select the SSID for the specied wireless band.Enter the limitation of the downloading speed in either Kbits/sec or Mbits/sec for the rule.Enter the limitation of the uploading speed in either Kbits/sec or Mbits/sec for the rule.
46D-Link DAP-2310 User ManualSection 3 - CongurationAP ArrayAn AP array is a set of devices on a network that are organized into a single group to increase ease of management.This check box allows the user to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will use the same conguration. The conguration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array.Enter a name for the AP array you have created.Enter a password that will be used to access the AP array you have created.Click this button to initiate a scan of all the available APs currently on the network.This table displays the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total.This table displays all the current array members. The DAP-2310 AP array feature supports up to eight AP array members.Enable Array:AP Array Name:AP Array Password:Scan AP Array List:AP Array List:Current Array Members:
47D-Link DAP-2310 User ManualSection 3 - CongurationAP Array ScanThe AP Array window is used to create up to 32 APs on a local network to be organized into a single group in order to increase ease of management. Click the Save button to let your changes take eect. Central WiFiManager and AP Array are mutually exclusive functions.Select the check box to enable the AP array function. The three modes that are available are Master, Backup Master, and Slave. APs in the same array will use the same conguration. The conguration will sync the Master AP to the Slave AP and the Backup Master AP when a Slave AP and a Backup Master AP join the AP array.Enter an AP array name for the group here. Enter an AP array password for the group here. This password must be the same on all the APs in the group.Click this button to initiate a scan of all the available APs currently on the network. Display the AP array connection status.This table displays the current AP array status for the following parameters: Array Name, Master IP, MAC, Master, Backup Master, Slave, and Total. This table displays all the current array members. The DAP-2660 AP array feature supports up to eight AP array members.Enable AP Array:AP Array Name:AP Array Password:Scan AP Array List:Connection Status:AP Array List:Current Members:
48D-Link DAP-2310 User ManualSection 3 - CongurationConguration SettingsIn the AP array conguration settings windows, users can specify which settings all the APs in the group will inherit from the master AP. Make the required selection in this window and click the Save button to accept the changes made.Select to Enable or Disable the AP array congure feature here.Select this option to specify the basic wireless settings that the APs in the group will inherit.Select this option to specify the advanced wireless settings that the APs in the group will inherit.Select this option to specify the multiple SSIDs and VLAN settings that the APs in the group will inherit.Select this option to specify the other advanced settings that the APs in the group will inherit.Select this option to specify the administrative settings that the APs in the group will inherit.Enable AP Array Conguration:Wireless Basic Settings:Wireless Advanced Settings:Multiple SSID & VLAN:Advanced Functions:Administration Settings:
49D-Link DAP-2310 User ManualSection 3 - CongurationAuto-RFIn this windows, users can view and congure the automatic radio frequency settings as well as congure the the auto-initiate period and threshold values. Click the Save button to accept the changes made.Select to Enable or Disable the auto-RF feature here.Click the Auto-RF Optimize button to initiate the auto-RF optimization feature.Select the Enable or Disable the auto-initiate feature here.After enabling the auto-initiate option, the auto-initiate period value can be entered here. This value must be between 1 and 24 hours.Select the RSSI threshold value here. This value is listed in the drop-down menu in increments of 10% from 10% to 100%.Enter the RF report frequency value here. Enable: Auto-RF:Initiate Auto-RF:Auto-Initiate:Auto-Initiate Period:RSSI Threshold:RF Report Frequency:
50D-Link DAP-2310 User ManualSection 3 - CongurationLoad BalanceIn this window, users can view and congure the AP array’s load balancing settings. Click the Save button to accept the changes made.Select to Enable or Disable the load balance feature here.Enter the active threshold value here.Enable Load Balance:Active Threshold:
51D-Link DAP-2310 User ManualSection 3 - CongurationCaptive Portal Authentication Settings - TicketThe Captive Portal is a built-in web authentication server. When a station connects to an AP, the web brower will be redirected to a web authentication page. In this windows, user can view and congure the Captive Portal settings. Click the Add button to add a new entry. Click the Delete or Delete All button to remove a specic entry or all the entries congured.Select the captive portal encryption type here. Options to choose from are Ticket, User/Password, Remote Radius, LDAP and POP3. In this section we’ll discuss the Ticket option.Enter the number of ticket that will be used here.Enter the duration value, in hours, for this ticket.Select the last active date for this ticket here. Year, Month and Day selections can be made.Enter the maximum amount of users that can use this ticket at the same time.Encryption Type:Ticket Quantity:Duration:Last Active Day:User Limit:
52D-Link DAP-2310 User ManualSection 3 - CongurationAuthentication Settings - User/PasswordSelect the captive portal encryption type here. Options to choose from are Ticket, User/Password, Remote Radius, LDAP and POP3. In this section we’ll discuss the User/Password option.Enter the restricted subnets here. Access to these subnets will denied to guest accounts. Up to four restricted subnet entries can be dened.Enter the username for the new account here.Enter the password for the new account here.Select the group for the new account here. Options to choose from are Manager and Guest. Guest accounts will have limited access.Encryption Type:Restricted Subnets:Username:Password:Group:
53D-Link DAP-2310 User ManualSection 3 - CongurationAuthentication Settings - Remote RADIUSSelect the captive portal encryption type here. Options to choose from are Ticket, User/Password, Remote Radius, LDAP and POP3. In this section we’ll discuss the Remote Radius option.Select the remote RADIUS server type here. Currently, only SPAP will be used.Enter the RADIUS server’s IP address here.Enter the RADIUS server’s port number here.Enter the RADIUS server’s shared secret here.Select to Enable or Disable the accounting mode here.Enter the accounting server’s IP address here.Enter the accounting server’s port number here.Enter the accounting server’s shared serect here. Encryption Type:Remote Radius Type:Radius Server:Radius Port:Radius Secret:Accounting Mode:Accounting Server:Accounting Port:Accounting Secret:
54D-Link DAP-2310 User ManualSection 3 - CongurationAuthentication Settings - LDAPSelect the captive portal encryption type here. Options to choose from are Ticket, User/Password, Remote Radius, LDAP and POP3. In this section we’ll discuss the LDAP option.Enter the LDAP server’s IP address or domain name here.Enter the LDAP server’s port number here.Select the authentication mode here. Options to choose from are Simple and TLS.Enter the LDAP server account’s username here.Enter the LDAP server account’s password here.Enter the administrator’s domain name here.Enter the LDAP account attribute string here. This string will be used to search for clients.Enter the identity’s full path string here. Alternatively, select the Auto Copy checkbox to automatically add the generic full path of the web page in the identity eld.Encryption Type:Server:Port:Authenticate Mode:Username:Password:Base DN:Account Attribute:Identity:
55D-Link DAP-2310 User ManualSection 3 - CongurationAuthentication Settings - POP3Select the captive portal encryption type here. Options to choose from are Ticket, User/Password, Remote Radius, LDAP and POP3. In this section we’ll discuss the Ticket option.Enter the POP3 server’s IP address or domain name here.Enter the POP server’s port number here.Select the connection type here. Options to choose from are None and SSL/TLS.Encryption Type:Server:Port:Connection Type:
56D-Link DAP-2310 User ManualSection 3 - CongurationLogin Page UploadIn this window, users can upload a custom login page picture that will be used by the captive portal feature. Click the Browse button to navigate to the image le, located on the managing computer and then click the Upload button to initiate the upload.In this eld the path to the image le, that will be uploaded, will be displayed. Alternatively, the path can be manually entered here.Upload picture from le:
57D-Link DAP-2310 User ManualSection 3 - CongurationWeb RedirectionIn this windows, users can view and congure the Web redirection settings for the captive portal hosted by this access point. Wireless clients will be redirected to this web site prior and after authentication. Click the Save button to accept the changes made.Select this checkbox to enable the Web redirection feature.Enter the destination web site’s address here.Web Redirection:Web Site:
58D-Link DAP-2310 User ManualSection 3 - CongurationDHCP Server Dynamic Pool SettingsThe DHCP address pool denes the range of the IP address that can be assigned to stations in the network. A Dynamic Pool allows wireless stations to receive an available IP with lease time control. If needed or required in the network, the DAP-2310 is capable of acting as a DHCP server.Dynamic Host Configuration Protocol (DHCP) assigns dynamic IP addresses to devices on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-2310 to function as a DHCP server.Input the rst IP address available for assignment on your network.Enter the number of IP addresses available for assignment. IP addresses are increments of the IP address specied in the “IP Assigned From” eld.All devices in the network must have the same subnet mask to communicate. Enter the submask for the network here.Enter the IP address of the gateway on the network.Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer that has a dynamically assigned IP address.Function Enable/Disable:IP Assigned From:The Range of Pool (1-254):Subnet Mask:Gateway:WINS:
59D-Link DAP-2310 User ManualSection 3 - CongurationEnter the IP address of the Domain Name System (DNS) server. The DNS server translates domain names such as www.dlink.com into IP addresses.Enter the domain name of the network, if applicable. (An example of a domain name is: www.dlink.com.)The lease time is the period of time before the DHCP server will assign new IP addresses.DNS:Domain Name:Lease Time (60-31536000 sec):
60D-Link DAP-2310 User ManualSection 3 - CongurationStatic Pool SettingThe DHCP address pool denes the range of IP addresses that can be assigned to stations on the network. A static pool allows specic wireless stations to receive a xed IP without time control.Dynamic Host Conguration Protocol (DHCP) assigns IP addresses to wireless devices on the network. This protocol simplies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-2310 to function as a DHCP server. Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses assigned in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Save; the device will appear in the Assigned Static Pool at the bottom of the screen. You can edit or delete the device in this list. Enter the MAC address of the device requesting association here.Dene the submask of the IP address specied in the “IP Assigned From” eld. Function Enable/Disable:Assigned IP:Assigned MAC Address:Subnet Mask:
61D-Link DAP-2310 User ManualSection 3 - CongurationSpecify the Gateway address for the wireless network.Specify the Windows Internet Naming Service (WINS) server address for the wireless network. WINS is a system that determines the IP address of a network computer with a dynamically assigned IP address, if applicable.Enter the Domain Name System (DNS) server address for the wireless network. The DNS server translates domain names such as www.dlink.com into IP addresses.Specify the domain name for the network.Gateway:WINS:DNS:Domain Name:
62D-Link DAP-2310 User ManualSection 3 - CongurationCurrent IP Mapping ListThis window displays information about the current assigned DHCP dynamic and static IP address pools. This information is available when you enable DHCP server on the AP and assign dynamic and static IP address pools.These are IP address pools the DHCP server has assigned using the dynamic pool setting. The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool.The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool.The current corresponding DHCP-assigned IP address of the device.The length of time that the dynamic IP address will be valid.These are the IP address pools of the DHCP server assigned through the static pool settings. The host name of a device on the network that is assigned an IP address from the DHCP dynamic pool.The MAC address of a device on the network that is within the DHCP static IP address pool.The current corresponding DHCP-assigned static IP address of the device.Current DHCP Dynamic Prole:Host Name:Binding MAC Address:Assigned IP Address:Lease Time:Current DHCP Static Pools:Host Name:Binding MAC Address:Assigned IP Address:
63D-Link DAP-2310 User ManualSection 3 - CongurationFiltersWireless MAC ACLDisplays the current wireless band rate. Select Disable to disable the lters function.Select Accept to accept only those devices with MAC addresses in the Access Control List. All other devices not on the list will be rejected.Select Reject to reject the devices with MAC addresses on the Access Control List. All other devices not on the list will be accepted.Enter each MAC address that you wish to include in your lter list, and click Add.When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from this list.You may create an ACL list and upload it to the access point instead of manually entering the information. Once created, click the Browse button and locate your le. Select it and then click Upload.Click Download to export the ACL to a le on your computer.Wireless Band:Access Control List:MAC Address:MAC Address List:Upload ACL File:Download ACL File:
64D-Link DAP-2310 User ManualSection 3 - CongurationWLAN PartitionDisplays the current wireless band rate. Select Enable or Disable.The default is Enable. When disabled, all data from the Ethernet to associated wireless devices will be blocked. Wireless devices can still send data to the Ethernet.The default value is Enable, which allows stations to inter-communicate by connecting to a target AP. When disabled, wireless stations cannot exchange data through the AP.Wireless Band:Link Integrity:Ethernet to WLAN Access: Internal Station Connection:
65D-Link DAP-2310 User ManualSection 3 - CongurationTrac ControlUplink/Downlink SettingsThe uplink/downlink setting allows users to customize the downlink and uplink interfaces including specifying downlink/uplink bandwidth rates in Mbits per second. These values are also used in the QoS and Trac Manager windows. Once the desired uplink and downlink settings are nished, click the Save button to let your changes take eect.Downlink Bandwidth:Uplink Bandwidth:The downlink bandwidth in Mbits per second. Uplink Bandwidth: The uplink bandwidth in Mbits per second.
66D-Link DAP-2310 User ManualSection 3 - CongurationQoSQuality of Service (QoS) enhances the experience of using a network by prioritizing the trac of dierent applications. A QoS Rule identies a specic message ow and assigns a priority to that ow. For most applications, the priority classiers ensure the right priorities and specic QoS Rules are not required. QoS supports overlaps between rules. If more than one rule matches a specic message ow, the rule with the highest priority will be used.Enable this option if you want to allow QoS to prioritize your trac Priority Classiers. Allows the access point to recognize HTTP transfers for many common audio and video streams and prioritize them above other trac. Such streams are frequently used by digital media players.When enabled, this option causes the access point to automatically attempt to prioritize trac streams that it does not otherwise recognize, based on the behavior that the streams exhibit. This acts to de-prioritize streams that exhibit bulk transfer characteristics, such as le transfers, while leaving interactive trac, such as gaming or VoIP, running at a normal priority.QoS (Quality of Service):HTTP:Automatic:
67D-Link DAP-2310 User ManualSection 3 - CongurationTrac ManagerThe trac manager feature allows users to create trac management rules that specify how to deal with listed client trac and specify downlink/ uplink speed for new trac manager rules. Click the Save button to let your changes take eect.Trac Manager: Unlisted Client Trac: Downlink Bandwidth: Uplink Bandwidth:Use the drop-down menu to Enable the trac manager feature. Select Deny or Forward to determine how to deal with unlisted client trac. The downlink bandwidth in Mbits per second. This value is entered in the Uplink/Downlink Setting window. Uplink Bandwidth:The uplink bandwidth in Mbits per second. This value is entered in the Uplink/Downlink Setting window.
68D-Link DAP-2310 User ManualSection 3 - CongurationStatus Device InformationThis read-only window displays the configuration settings of the DAP-2310, including the firmware version and the device's MAC address.Device Information:
69D-Link DAP-2310 User ManualSection 3 - CongurationThe following information is available for each client communicating with the DAP-2310.Client InformationThis window displays the wireless client information for clients currently connected to the DAP-2310.Client Information:Displays the SSID of the client.Displays the MAC address of the client.Displays the wireless band that the client is connected to.Displays the type of authentication being used.Displays the client's signal strength.Displays the status of the power saving feature.SSID:MAC:Band:Authentication:Signal:Power Saving Mode:
70D-Link DAP-2310 User ManualSection 3 - CongurationWDS InformationThe following information is available for each client communicating with the DAP-2310.This window displays the Wireless Distribution System information for clients currently connected to the DAP-2310.WDS Information:Displays the SSID of the client.Displays the MAC address of the client.Displays the type of authentication being used.Displays the client's signal strength.Displays the status of the power saving feature.Name:MAC:Authentication:Signal:Status:
71D-Link DAP-2310 User ManualSection 3 - CongurationStatsEthernetThis page displays transmitted and received count statistics for packets and bytes.Ethernet Trac Statistics:
72D-Link DAP-2310 User ManualSection 3 - CongurationWLAN TracThis page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors.WLAN Trac Statistics:
73D-Link DAP-2310 User ManualSection 3 - CongurationLogView LogThe AP’s embedded memory displays system and network messages including a time stamp and message type. The log information includes but is not limited to the following items: cold start AP, upgrading rmware, client associate and disassociate with AP, and web login. The web page holds up to 500 logs.View Log:
74D-Link DAP-2310 User ManualSection 3 - CongurationLog SettingsEnter the IP address of the server you would like to send the DAP-2310 log to.Check the box for the type of activity you want to log. There are three types: System Activity, Wireless Activity, and Notice.Check to enable Email notication.Select the SMTP server from the drop-down menu.Check to enable authentication.Check to enable SSL/TLS authentication.Enter the “From” email address.Enter the destination email address.Enter the Email Server Address.Enter the SMTP port.Enter your email username.Enter your email password.Enter your email password again.Select when to send the log to your email (in hours). You will receive an email when the log is full too.Log Server/IP Address:Log Type:Email Notication:Outgoing Mail Server (SMTP):Authentication:SSL / TLS:From Email Address:To Email Address:Email Server Address:SMTP Port:Username:Password:Conrm Password:Schedule:
75D-Link DAP-2310 User ManualSection 3 - CongurationCheck one or more of the five main categories to display the various hidden administrator parameters and settings displayed on the next ve pages. Maintenance Administration Settings
76D-Link DAP-2310 User ManualSection 3 - CongurationLimit AdministratorEach of the ve main categories display various hidden administrator parameters and settings.Check the box provided and the enter the specic VLAN ID that the administrator will be allowed to log in from.Check to enable the Limit Administrator IP address.Enter the IP address range that the administrator will be allowed to log in from and then click the Add button.Limit Administrator VLAN ID:Limit Administrator IP:IP Range:
77D-Link DAP-2310 User ManualSection 3 - CongurationSystem Name SettingsEach of the ve main categories display various hidden administrator parameters and settings.The name of the device. The default name is D-Link DAP-2310.The physical location of the device, e.g. 72nd Floor, D-Link HQ.System Name:Location:
78D-Link DAP-2310 User ManualSection 3 - CongurationLogin SettingsEach of the ve main categories display various hidden administrator parameters and settings.Enter a user name. The default is admin.When changing your password, enter the old password here.When changing your password, enter the new password here. The password is case-sensitive. “A” is a dierent character than “a.” The length should be between 0 and 12 characters.Enter the new password a second time for conrmation purposes.Login Name:Old Password:New Password:Conrm Password:
79D-Link DAP-2310 User ManualSection 3 - CongurationConsole SettingsEach of the ve main categories display various hidden administrator parameters and settings.Status is enabled by default. Uncheck the box to disable the console.Select the type of protocol you would like to use, Telnet or SSH.Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never.Status:Console Protocol:Timeout:
80D-Link DAP-2310 User ManualSection 3 - CongurationSNMP SettingsEach of the ve main categories display various hidden administrator parameters and settings.Check the box to enable the SNMP functions. This option is disabled by default.Enter the public SNMP community string.Enter the private SNMP community string.Check the box to enable Trap Status.Enter the Trap Server IP address.Status:Public Community String:Private Community String:Trap Status:Trap Server IP:
81D-Link DAP-2310 User ManualSection 3 - CongurationEnable Central WiFiManager:Central WiFiManager SettingsThe Central WiFiManager section is used to create a set of APs on the Internet to be organized into a single group in order to increase ease of management. Central WiFiManager and AP Array are mutually exclusive functions.Select to enable or disable the Central WiFiManager.
82D-Link DAP-2310 User ManualSection 3 - CongurationFirmware and SSL Certication UploadThe current firmware version is displayed above the le location eld. After downloading the most recent version of firmware for the DAP-2310 from http://support.dlink.com to your local computer, use the Browse button to locate the rmware le on your computer. Click Upload to update the rmware version. Please don’t turn the power o while upgrading.You may load a language pack to display the utility in another language. Click Browse to locate the language pack file on your local computer. After selecting and opening the file, click Upload to upload the file to theDAP-2310.Click Browse to locate the SSL Certication le on your local computer. After selecting and opening the le, click Upload to upload the le to the DAP-2310.Upload Firmware From Local Hard Drive:Language Pack Upgrade:Upload SSL Certication From Local Hard Drive:This page allows the user to perform a rmware upgrade. A Firmware upgrade is a function that upgrade the running software used by the access point. This is a useful feature that prevents future bugs and allows for new features to be added to this product. Please go to your local D-Link website to see if there is a newer version rmware available.
83D-Link DAP-2310 User ManualSection 3 - CongurationConguration File UploadClick the Browse button to locate a previously saved conguration le on your local computer. After selecting the le, click Upload to apply the conguration settings to the DAP-2310.Click Download to save the current DAP-2310 configuration to your local computer. Note that if you save one configuration with the administrator’s password now, after resetting your DAP-2310, and then updating to this saved conguration le, the password will be gone.Upload File:Download Conguration File:
84D-Link DAP-2310 User ManualSection 3 - CongurationTime and DateDisplays the current time and date settings.Check to enable the AP to get system time from an NTP server.Enter the NTP server URL or IP address.Use the drop-down menu to select your correct Time Zone.Check the box to Enable Daylight Saving Time.Use the drop-down menu to select the correct Daylight Saving oset.You can either manually set the time for your AP here, or you can click the Copy Your Computer’s Time Settings button to copy the time from the computer you are using (Make sure that the computer’s time is set correctly). Current Time:Enable NTP Server:NTP Server:Time Zone:Enable Daylight Saving:Daylight Saving Dates:Set the Date and Time Manually:
85D-Link DAP-2310 User ManualSection 3 - CongurationSystemSystem SettingsClick Restart to restart the DAP-2310.Click Restore to restore the DAP-2310 back to factory default settings.Click Clear to remove any loaded language packs.Restart the Device:Restore to Factory Default Settings:Clear Language Pack:
86D-Link DAP-2310 User ManualSection 3 - CongurationHelpScroll down the Help page for topics and explanations.Help:
87D-Link DAP-2310 User ManualSection 6 - TroubleshootingTroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DAP-2310. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a dierent operating system, the screenshots on your computer will look similar to the following examples.)1. Why can’t I access the web-based conguration utility?When entering the IP address of the D-Link access point (192.168.0.50 for example), you are not connecting to a website on the Internet nor do you have to be connected to the Internet. Networking BasicsCheck your IP addressAfter you install your network adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.Click on Start > Run. In the run box type cmd and click OK.At the prompt, type ipcong and press Enter.This will display the IP address, subnet mask, and the default gateway of your adapter.
88D-Link DAP-2310 User ManualSection 6 - TroubleshootingIf the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters. • Make sure you have an updated Java-enabled web browser. We recommend the following: - Microsoft Internet Explorer® 6.0 and higher- Mozilla Firefox 3.0 and higher- Google™ Chrome 2.0 and higher- Apple Safari 3.0 and higher• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a dierent cable or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be on.• Disable any internet security software running on the computer. Software rewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it.
89D-Link DAP-2310 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Step 1Windows® 2000: Click on Start > Settings > Control Panel > Network ConnectionsWindows® XP: Click on Start > Control Panel > Network Connections Windows Vista®: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connectionsStep 2Right-click on the Local Area Connection which represents your network adapter and select Properties.Step 3Highlight Internet Protocol (TCP/IP) and click Properties.Step 4Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).
90D-Link DAP-2310 User ManualAppendix B - Networking BasicsSet Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP.Step 5Click OK twice to save your settings.
91D-Link DAP-2310 User ManualAppendix B - Networking Basics• Congure your Internet settings:• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults.• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.• Close your web browser (if open) and open it.• Access the web management. Open your web browser and enter the IP address of your D-Link access point in the address bar. This should open the login page for your the web management. • If you still cannot access the conguration, unplug the power to the access point for 10 seconds and plug back in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.2. What can I do if I forgot my password?If you forgot your password, you must reset your access point. Unfortunately, this process will change all your settings back to the factory defaults.To reset the access point, locate the reset button (hole) on the rear panel of the unit. With the access point powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the access point will go through its reboot process. Wait about 30 seconds to access the access point. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password box empty.
92D-Link DAP-2310 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsStandards• IEEE 802.11b• IEEE 802.11g• IEEE 802.11n• IEEE 802.3• IEEE 802.3u• IEEE 802.3ab• IEEE 802.3afNetwork Management• Web Browser interface HTTP Secure HTTP (HTTPS) • Central WiFiManager• AP Array Tool• SNMP Support Private MIB• Command Line Interface Telnet Secure SSH TelnetData Rates*For 802.11b: • 11, 5.5, 2, and 1 Mbps For 802.11g: • 54, 48, 36, 24, 18, 12, 9, and 6 MbpsFor 802.11n: HT20/HT40 • 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5, 52/108, 39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 MbpsSecurity• WPA™ Personal/Enterprise• WPA2™ Personal/Enterprise• 802.1x• WEP™ 64-/128-bit• SSID Broadcast Disable• MAC Address Access ControlWireless Frequency Range• 2.4 to 2.4835 GHzOperating Voltage• 48V DC +/- 10% for PoE*** or 12V/1ARadio and Modulation TypeFor 802.11g/n:BPSK, QPSK, 16QAM, and 64QAM with OFDMFor 802.11b:DQPSK, DBPSK, DSSS, and CCKOperating Frequency**For 802.11b/g:2.4 ~ 2.4835 GHzFor 802.11n:2.4 GHz Band: 2.4 ~ 2.4835 GHzDipole Antenna• 2dBi Gain @2.4 GHzMax Transmit Output Power (Dual Chain)• FCC: 26dBm• ETSI: 17dBmMax Power Consumption• Max. 8W with 12V/DC• Max. 9W with PoE**** Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.• 5dBi Gain @2.4 GHz
93D-Link DAP-2310 User ManualAppendix E - WarrantyLEDs• Power• LAN• 2.4 GHzTemperature• Operating: 0˚C to 40˚C • Storing: -20˚C to 65˚C Humidity• Operating: 10%~90% (non-condensing)• Storing: 5%~95% (non-condensing)CerticationsDimensions• L = 148mm• W = 111mm• H = 28mmWeight• 227g
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.
Thisradiotransmitter(C037‐510982‐A/WSS007)hasbeenapprovedbyIndustryCanadatooperatewiththeantennatypeslistedbelowwiththemaximumpermissiblegainandrequiredantennaimpedanceforeachantennatypeindicated.Antennatypesnotincludedinthislist,havingagaingreaterthanthemaximumgainindicatedforthattype,arestrictlyprohibitedforusewiththisdevice.Leprésentémetteurradio(C037‐510982‐A/WSS007)aétéapprouvéparIndustrieCanadapourfonctionneraveclestypesd'antenneénumérésci‐dessousetayantungainadmissiblemaximaletl'impédancerequisepourchaquetyped'antenne.Lestypesd'antennenoninclusdanscetteliste,oudontlegainestsupérieuraugainmaximalindiqué,sontstrictementinterditspourl'exploitationdel'émetteur.
NCC 警告語 本產品符合低功率電波輻射性電機管理辦法： 第十二條 經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方的繼續使用。 前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為 0.6165 mW/cm2

Navigation menu