D Link 2003080003-1 2.4GHz WLAN Access Point User Manual dwl700ap manual 061203

D Link Corporation 2.4GHz WLAN Access Point dwl700ap manual 061203

User manual

ManualD-Link Air DWL-700AP2.4GHzBuilding Networks for PeopleTM Wireless Access Point
2ContentsPackage Contents ................................................................................3Introduction............................................................................................4Wireless Basics ....................................................................................6Getting Started ......................................................................................8Using the Configuration Utility ................................................................9Networking Basics ..............................................................................20Troubleshooting...................................................................................33Technical Specifications ......................................................................38Contacting Technical Support ..............................................................40
3Computer with Windows, Macintosh, or Linux-basedoperating system with an installed Ethernet adapterContents of Package:D-Link Air DWL-700AP2.4 GHz Wireless Access PointPower Supply - 5V DC, 2.0AManual on CDQuick Installation GuideEthernet CablePackage ContentsIf any of the above items are missing, please contact your reseller.System Requirements:!!!!!!!Note: Using a power supply with a different voltage rating than the one includedwith the DWL-700AP will cause damage and void the warranty for this product.Internet Explorer or Netscape Navigator version 6.0 or above,with JavaScript enabled
4IntroductionThe D-Link Air DWL-700AP Wireless Access Point is an 802.11b high-performancewireless Access Point. It is an ideal way to extend the reach and number of computersconnected to your wireless network.The DWL-700AP is compatible with existing 802.11b devices such as the D-Link Air andAirPlus family of products including the DWL-650 and DWL-650+ Wireless CardbusAdapters, the DI-614+ Wireless Router, and the DWL-120 Wireless USB Adapter.The IEEE 802.11b Ethernet standard allows you to connect computers and 802.11bcompatible devices at speeds up to 11Mbps, dependent upon the distance betweenwireless adapters, the configuration of your working environment, or the capabilities orlimitations of your computer systems.After completing the steps outlined in the Quick Installation Guide (included in yourpackage) you will have the ability to share information and resources, such as filesand printers, and enjoy the freedom that wireless networking delivers.The DWL-700AP is compatible with most popular operating systems, includingMacintosh, Linux and Windows, and can be integrated into a large network. ThisManual is designed to help you connect the Access Point and the D-Link WirelessAdapters into a network in Infrastructure mode. Please take a look at the GettingStarted section in this manual to see an example of an Infrastructure network usingthe DWL-700AP.
5!Fully 802.11b Compatible – Fully compatible with the IEEE 802.11b standardand interoperable with all existing 802.11b compliant devices!Stronger Network Security with up to 128-bit WEP Encryption – Supports 64/128-bit WEP encryption for higher level of security for your data and wirelesscommunication than encryption found in existing 802.11b products!Built-in DHCP Server – If enabled, it will automatically assign IP addresses towireless clients on the local network.!Web-based interface for Managing and Configuring – Easy-to-use interfaceindependent of the operating systemFeatures and BenefitsLEDSWLAN: blinking green lightindicates wireless activity;solid green light indicatesconnectionLAN: blinking green lightindicates activity; solid greenlight indicates connectionPower: solid green lightindicates connection to apower sourceLED stands for Light-Emitting Diode. The DWL-700AP Wireless Access Point has 3LEDs as shown below:
6Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use andcompatible high-speed wireless connectivity within your home, business or public accesswireless networks. D-Link wireless products will allow you access to the data you want,when and where you want it. You will be able to enjoy the freedom that wireless networkingbrings.A Wireless Local Area Network (WLAN) is a cellular computer network that transmitsand receives data with radio signals instead of wires. WLANs are used increasingly inboth home and office environments, and public areas such as airports, coffee shops anduniversities. Innovative ways to utilize WLAN technology are helping people to work andcommunicate more efficiently. Increased mobility and the absence of cabling and otherfixed infrastructure have proven to be beneficial for many users.Wireless users can use the same applications they use on a wired network. Wirelessadapter cards used on laptop and desktop systems support the same protocols asEthernet adapter cards.People use WLAN technology for many different purposes:Mobility - Productivity increases when people have access to data in any locationwithin the operating range of the WLAN. Management decisions based on real-timeinformation can significantly improve worker efficiency.Low Implementation Costs – WLANs are easy to set up, manage, change andrelocate. Networks that frequently change can benefit from WLANs ease ofimplementation. WLANs can operate in locations where installation of wiring may beimpractical. Installation and Network Expansion - Installing a WLAN system can be fastand easy and can eliminate the need to pull cable through walls and ceilings. Wirelesstechnology allows the network to go where wires cannot go - even outside the home oroffice.Scalability – WLANs can be configured in a variety of ways to meet the needs ofspecific applications and installations. Configurations are easily changed and rangefrom peer-to-peer networks suitable for a small number of users to larger infrastructurenetworks to accommodate hundreds or thousands of users, depending on the numberof wireless devices deployed.Inexpensive Solution - Wireless network devices are as competitively priced asconventional Ethernet network devices.
7Installation ConsiderationsKeep in mind, however, that the number, thickness and location of walls, ceilings, orother objects that the wireless signals must pass through, may limit the range. Typicalranges vary depending on the types of materials and background RF (radio frequency)noise in your home or business. The key to maximizing wireless range is to follow thesebasic guidelines:Wireless Basics (continued)Keep the number of walls and ceilings between the DWL-700AP andother network devices to a minimum - each wall or ceiling can reduceyour D-Link Air Wireless product’s range from 3-90 feet (1-30 meters.)Position your devices so that the number of walls or ceilings is minimized.Be aware of the direct line between network devices. A wall that is 1.5 feet thick(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. Ata 2-degree angle it looks over 42 feet (14 meters) thick! Position devices sothat the signal will travel straight through a wall or ceiling (instead of at an angle)for better reception.22222Building Materials can impede the wireless signal - a solid metal door or aluminumstuds may have a negative effect on range. Try to position wireless devices andcomputers with wireless adapters so that the signal passes through drywall oropen doorways and not other materials.33333Keep your product away (at least 3-6 feet or 1-2 meters) from electricaldevices or appliances that generate RF noise.4444411111
8Please remember that D-Link Air wireless devices are pre-configured to connecttogether, right out of the box, with their default settings.You will need broadband Internet access (a Cable or DSL-subscriber line intoyour home or office)Consult with your Cable or DSL provider for proper installation of the modemConnect the Cable or DSL modem to your broadband router (see the QuickInstallation Guide included with your router.)If you are connecting a desktop computer in your network, you can install theD-Link Air DWL-520 wireless PCI adapter into an available PCI slot on yourdesktop computer.(See the Quick Installation Guide included with the DWL-520.)Install the drivers for the wireless Cardbus adapter into a laptop computer.(e.g, the DWL-650; See the Quick Installation Guide included with the DWL-650.)Setting up a WirelessInfrastructure Network62134Getting StartedConnect the router to the D-Link Air DWL-700AP.(See the Quick Installation Guide included with the DWL-520.)For a typical wireless setup at home (as shown above), please do the following:5
9Whenever you want to configure your network or the DWL-700AP, you can access theConfiguration Utility by opening the web-browser and typing in the IP Address of theDWL-700AP. The DWL-700AP’s default IP Address is shown below:Open the web browserType in the IP Addressof the Access Point(The IP Address shown in the example above is the default setting. Use this IP addresswhen connecting to a network consisting of other D-Link devices set to their defaultsettings. If you have changed the IP Address of the DWL-700AP to conform to a net-work other than one with D-Link devices, then input that IP Address in the web browser,instead of the default IP Address shown.)Type admin in theUser Name fieldLeave the PasswordblankClick OK!admin!!!!Using the Configuration UtilityIf you wish to change the default settings or optimize the performance of theDWL-700AP, D-Link has included a configuration utility for this purpose.
10Home > WizardClicking Apply will save changes made to the pageApplyClicking Cancel will clear changes made to the pageClicking Help will bring up helpful information regarding the pageHelpClicking Restart will restart the router. (Necessary for some changes.)RestartCancelAfter logging in, the screen below will appear. Click on the tabs in the screen toaccess different segments of the Configuration Utility. If you choose to use the web-based configuration menu, please configure the DWL-700AP from a computer with anethernet connection to the DWL-700AP.Using the Configuration Utility (continued)
11Using the Configuration Utility (continued)Home > WirelessAP Name: You may choose to rename your Access Point, especially if you havemore than one Access Point on your network.SSID: (Service Set Identifier) default is the default setting. The SSID is a uniquename that identifies a network. All devices on a network must share the same SSIDname in order to communicate on the network. If you choose to change the SSID fromthe default setting, input your new SSID name in this field. The SSID can be up to 32characters in length.Channel: Channel 6 is the default channel. Input a new number if you want to changethe default setting. All devices on the network must be set to the same channel tocommunicate on the network.WEP Encryption: Select Enable Encryption to use WEP (Wired Equivalent Privacy)on the network. All devices on the network, and the Access Point, must share the sameWEP selection – either Enable or Disable, and they must share the same WEP key.The WEP key is generated from ASCII or Hexadecimal entries that are either 64, 128,or 256 bit in length.When enabling encryption, select the Key Type (ASCII or Hexadecimal) and then inputthe appropriate digits or letters. You can create up to 4 keys. Select the key you wishto use.Hexadecimal digits consist of the numbers 0-9 and the letters A-FASCII (American Standard Code for Information Interchange) is a code forrepresenting English letters as numbers from 0-127
12Using the Configuration Utility (continued)Dynamic IP Address: Select this option if you would like to have an IP Addressautomatically assigned to the DWL-700AP by a DHCP server in your network.DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assign-ing dynamic IP addresses “automatically.” With a DHCP Server there is no need tomanually assign an IP Address.Static IP Address: Select this option if you are manually assigning an IP Address.IP Address: 192.168.0.50 is the default IP Address of the Access Point.Subnet Mask: 255.255.255.0 is the default Subnet Mask. All devices on thenetwork must have the same subnet mask to communicate on the networkGateway: Enter the IP Address of the gateway in your networkHome > LANIP AddressIf you need to assign Static IP Addresses to the devices in your network, pleaseremember that the IP Address for each computer or device must be in the same IPAddress range as all the devices in the network. Each device must also have thesame Subnet Mask. For example: Assign the first computer an IP Address of192.168.0.2 and a Subnet Mask of 255.255.255.0, the second device an IP Ad-dress of 192.168.0.3 and a Subnet Mask of 255.255.255.0, and so on. Devices thatare assigned the same IP Address may not be visible on the network.
13Using the Configuration Utility (continued)Home > DHCPDHCP Server: Select Enabled or Disabled. Disabled is the default setting. Ifyou want to use the Access Point as a DHCP server to automatically assign DynamicIP Addresses on the network, you will select Enabled.Starting IP Address: If you have enabled the DHCP server function, enter thestarting point of the IP Address range for your networkEnding IP Address: Enter the ending IP Address of your IP Address range, if youhave enabled the DHCP function of the Access PointLease Time: Choose the length of time at which the DHCP function of theDWL-700AP automatically regenerates the IP Addresses to the devices in yournetworkDHCP Client Table: Lists the devices on your network that are receiving dynamicIP Addresses from the Access Point
14Using the Configuration Utility (continued)Advanced > PerformanceThe default Performancesettings are shown here.Beacon Interval: Beaconsare packets sent by an AccessPoint to synchronize a wirelessnetwork. Specify a Beaconinterval value. Default (100) isrecommended.RTS Threshold: This valueshould remain at its defaultsetting of 2,432. If you encoun-ter inconsistent data flow, onlyminor modifications to the valuerange between 256 and 2,432are recommended.Fragmentation: This value should remain at its default setting of 2,346. If you expe-rience a high packet error rate, you may slightly increase your Fragmentation Thresholdwithin the value range of 256 to 2,346. Setting the Fragmentation Threshold too low mayresult in poor performance.DTIM Interval (Beacon Rate): (Delivery Traffic Indication Message) Enter a valuebetween 1 and 255 (default is 3) for the Delivery Traffic Indication Message (DTIM.) ADTIM is a countdown informing clients of the next window for listening to broadcast andmulticast messages.Basic Rates: Default is 1-2Mbps. We recommend that you keep the setting at default.If you lose connection at the TX rate, you will regain connection at the basic rate. A lowerBasic Rate will make reconnection easier.TX Rates: Select the transmission rate for the network. The default rate is 1-2-5.5-11-22Mbps.Preamble: Long Preamble is the default setting. (High traffic networks should use theshorter preamble type.) The preamble defines the length of the CRC block (Cyclic Re-dundancy Check is a common technique for detecting data transmission errors) used incommunication between the Access Point and the roaming wireless Network adapters.Authentication:Open System - communicates the key across the networkShared Key - devices must have identical WEP settings to communicateAuto - automatically adjusts to the Authentication mode of the wireless clientSSID Broadcast: (Service Set Identifier) Enable or Disable (default) the broadcastof the SSID name across the network. SSID is a name that identifies a wirelessnetwork. All devices on a network must use the same SSID to establish communica-tion.
15Using the Configuration Utility (continued)Advanced > FiltersUse MAC Filters to allow or deny computers by their MAC addresses from access-ing the DWL-700AP. You can either manually add a MAC address or select the MACaddress from the list of clients that are currently connected to the Broadband Router(Connected PCs). The default setting is Disabled MAC Filters.MAC Filter List: This list will display the MAC addresses that are in the selectedfilter
16Using the Configuration Utility (continued)Tools > AdminNew Password: Enter thenew passwordConfirm Password:Re-enter the password toconfirm itTools > SystemSave Settings: The currentsystem settings can be savedas a file onto the local harddrive.Load Settings: The savedfile or any other saved settingfile can be loaded back on theAccess Point. To reload a sys-tem settings file, click onBrowse to browse the localhard drive and locate the sys-tem file to be used. Click Loadwhen you have selected the fileto be loaded back onto the Ac-cess Point.Restore: You may also reset the Access Point back to factory settings by clicking onRestore. Make sure to save the unit’s settings before clicking on Restore.
17Using the Configuration Utility (continued)Tools > FirmwareYou can upgradethe firmware of theAccess Point atthis page. Makesure the firmwareyou want to use ison the local harddrive of thecomputer. Click onBrowse to browsethe local hard driveand locate thefirmware to be usedfor the update.Please check the D-Link support site forfirmware updates athttp://support.dlink.com.Once you have found the firmware to be used, click Apply.Status > Device InfoThis screen displaysthe current Wirelessand Ethernet settingsof the DWL-700AP. D-Link Access Point
18Using the Configuration Utility (continued)Status > LogView LogThe Access Point keeps a running log of events and activities occurring on the AP. If thedevice is rebooted, the logs are automatically cleared. You may save the log files underLog Setting.First Page - The first page of the log.Last Page - The last page of the log.Previous - Moves back one log page.Next - Moves forward one log page.Clear - Clears the logs completely.Log Settings - Brings up the page to configure the logs.Log SettingsNot only does the Access Point display the logs of activities and events, it can be setupto send these logs to another location. The logs can be sent via email to an emailaccount.SMTP Server - The address of the SMTP server that will be used to send the logs.Send to - The email address the logs will be sent to. Click on Email Log Now to sendthe email.
19Using the Configuration Utility (continued)Status> StatsTraffic StatisticsThe Access Point keeps statisticsof traffic that passes through it. Youare able to view the amount ofpackets that passes through theRouter on both the Ethernet portionof the network and the Wirelessportion of the network. The trafficcounter will reset if the device isrebooted.Status > WirelessConnectedWireless PCs LIstThis list displays the MACAddresses of connected PC’s andthe length of time that they havebeen connected.HelpSelect from this menu for extrahelp.MenuDWL-700AP
20Using the Network Setup Wizard in Windows XPIn this section you will learn how to establish a network at home or work, usingMicrosoft Windows XP.Note: Please refer to websites such as http://www.homenethelp.comand http://www.microsoft.com/windows2000 for information about networkingcomputers using Windows 2000, ME or 98SE.Go to Start>Control Panel>Network ConnectionsSelect Set up a home or small office networkNetworking BasicsWhen this screen appears, click Next.
21Please follow all the instructions in this window:Networking BasicsClick NextIn the following window, select the best description of your computer. If yourcomputer connects to the internet through a gateway/router, select the second optionas shown.Click Next
22Enter a Computer description and a Computer name (optional.)Networking BasicsClick NextEnter a Workgroup name. All computers on your network should have the sameWorkgroup name.Click Next
23Please wait while the Network Setup Wizard applies the changes.Networking BasicsWhen the changes are complete, click Next.Please wait while the Network Setup Wizard configures the computer.This may take a few minutes.
24Networking BasicsIn the window below, select the option that fits your needs. In this example, Createa Network Setup Disk has been selected. You will run this disk on each of thecomputers on your network. Click Next.Insert a disk into the Floppy Disk Drive, in this case drive A.
25Networking BasicsPlease read the information under Here’s how in the screen below. After you com-plete the Network Setup Wizard you will use the Network Setup Disk to run theNetwork Setup Wizard once on each of the computers on your network. To continueclick Next.
26Networking BasicsPlease read the information on this screen, then click Finish to complete theNetwork Setup Wizard.The new settings will take effect when you restart the computer. Click Yes to restartthe computer.You have completed configuring this computer. Next, you will need to run the NetworkSetup Disk on all the other computers on your network. After running the NetworkSetup Disk on all your computers, your new wireless network will be ready to use.
27!Networking BasicsNaming your ComputerTo name your computer, please follow these directions:In Windows XP:Click Start (in the lower left corner of the screen)Right-click on My ComputerSelect Properties and click!!!!!Select the ComputerName Tab in the SystemProperties window.You may enter a Com-puter Description if youwish; this field is optional.To rename the computerand join a domain, ClickChange.
28Networking BasicsNaming your Computer!In this window, enter theComputer nameSelect Workgroup and enterthe name of the WorkgroupAll computers on your networkmust have the sameWorkgroup name.Click OK!!!Checking the IP Address in Windows XPThe wireless adapter-equipped computers in your network must be in the same IPAddress range (see Getting Started in this manual for a definition of IP Address Range.)To check on the IP Address of the adapter, please do the following:Right-click on theLocal AreaConnection iconin the task barClick on Status!!
29Networking BasicsChecking the IP Address in Windows XPThis window will appear.Click theSupport tabClick Close!!Assigning a Static IP Address in Windows XP/2000Note: Residential Gateways/Broadband Routers will automatically assign IP Ad-dresses to the computers on the network, using DHCP (Dynamic Host Configura-tion Protocol) technology. If you are using a DHCP-capable Gateway/Router youwill not need to assign Static IP Addresses.If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IPAddress, please follow these instructions:!!Go to StartDouble-click onControl Panel
30Networking BasicsAssigning a Static IP Address in Windows XP/2000!Double-click onNetworkConnections!!Double-click onPropertiesRight-click on Local AreaConnections
31Networking BasicsAssigning a Static IP Addressin Windows XP/2000You have completed the assignment of a Static IP Address. (You do not need to assigna Static IP Address if you have a DHCP-capable Gateway/Router.)Click on Internet Protocol(TCP/IP)Click Properties!!IP Address:e.g., 192.168.0.2Subnet Mask:255.255.255.0Default Gateway:Enter the LAN IP address ofthe wireless router. (D-Linkwireless routers have a LAN IPaddress of 192.168.0.1) In the window below, select Use the following IP address. Input your IPaddress and subnet mask. (The IP Addresses on your network must bewithin the same range. For example, if one computer has an IP Address of192.168.0.2, the other computers should have IP Addresses that aresequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must bethe same for all the computers on the network.)!!Click OK Select Use the followingDNS server address. Enterthe LAN IP address of theWireless Router. (D-Linkwireless routers have a LANIP address of 192.168.0.1)!!
32Networking BasicsChecking the Wireless Connection by Pinging in Windows XP and2000Checking the Wireless Connection by Pinging in Windows Meand 98Go to Start > Run >type cmd. A windowsimilar to this onewill appear. Typepingxxx.xxx.xxx.xxx,where xxx is the IPAddress of theWireless Router orAccess Point. Agood wirelessconnection will showfour replies from theWireless Router orAcess Point, asshown.Go to Start > Run> type command.A window similar tothis will appear.Type pingxxx.xxx.xxx.xxxwhere xxx is the IPAddress of theWireless Router orAccess Point. Agood wirelessconnection willshow four repliesfrom the wirelessrouter or accesspoint, as shown.!!
33 Check that the Ethernet LED on the DWL-700AP is ON. If the LED isnot ON, check that the cable for the Ethernet connection is securelyinserted.Check that the Ethernet Adapter is working properly. Please see item3 (Check that the drivers for the network adapters are installedproperly) in this Troubleshooting section to check that the driversare loaded properly.Check that the IP Address is in the same range and subnet as theDWL-700AP. Please see Checking the IP Address in Windows XPin the Networking Basics section of this manual.Do a Ping test to make sure that the DWL-700AP is responding. Go toStart>Run>Type Command>Type ping 192.168.0.50. A successfulping will show four replies.Note: It is recommended that you use an Ethernet connection to configure theDWL-700AP Access Point.1. The computer used to configure the DWL-700AP cannot access theConfiguration menu.Note: The IP Address of the DWL-700AP is 192.168.0.50. All the computers on thenetwork must have a unique IP Address in the same range, e.g., 192.168.0.x. Anycomputers that have identical IP Addresses will not be visible on the network.They must all have the same subnet mask, e.g., 255.255.255.0TroubleshootingThis chapter provides solutions to problems that can occur during the installation andoperation of the DWL-700AP. We cover various aspects of the network including networkadapters. (The examples below are illustrated in Windows XP. If you have anotheroperating system, these solutions will still apply although the appearance on your com-puter screen may differ.)
34Troubleshooting (continued)Make sure the wireless client is associated and joined with the correct AccessPoint. To check this connection: Right-click on the Local Area Connectionicon in the taskbar> select View Available Wireless Networks. The Connectto Wireless Network screen will appear. Please make sure you have selectedthe correct available network, as shown in the illustrations below.2. The wireless client cannot access the Internet in the Infrastructuremode.Check that the IP Address assigned to the wireless adapter is within the sameIP Address range as the access point and gateway. Since the DWL-700APhas an IP Address of 192.168.0.50, wireless adapters must have an IP Addressin the same range, e.g., 192.168.0.x. Each device must have a unique IP Address;no two devices may have the same IP Address. The subnet mask must be thesame for all the computers on the network. To check the IP Address assignedto the wireless adapter, double-click on the Local Area Connection icon inthe taskbar > select the Support tab and the IP Address will be displayed.(Please refer to Checking the IP Address in the Networking Basics section ofthis manual.)If it is necessary to assign a Static IP Address to the wireless adapter, pleaserefer to the appropriate section in Networking Basics. If you are entering aDNS Server address you must also enter the Default Gateway Address.(Remember that if you have a DHCP-capable router, you will not need to assigna Static IP Address. See Networking Basics: Assigning a Static IPAddress.)defaultNote: Screen shots were takenusing Windows XP. Yourscreens may look similar.default
353. Check that the drivers for the network adapters are installed properly.Troubleshooting (continued)You may be using different network adapters than those illustrated here, but thisprocedure will remain the same, regardless of the type of network adapters you areusing.Go to StartRight-click on My ComputerClick Properties Select the Hardware Tab Click Device Manager
36Troubleshooting (continued)Double-click on NetworkAdaptersRight-click on D-Link Air DWL-650 WirelessCardbus Adapter(or whatever network adapteryou are using)Select Properties to check thatthe drivers are installed properlyClick OKLook under Device Status tocheck that the device isworking properly.D-Link Air DWL-650 Wireless Cardbus AdapterD-Link Air DWL-650 Wireless Cardbus AdapterD-Link Air DWL-650 Wireless Cardbus AdapterCardbus
37Troubleshooting (continued)4. Resetting the DWL-700AP to Factory Default SettingsAfter you have tried other methods for troubleshooting your network, you maychoose to Reset the DWL-700AP to the factory default settings. Remember that D-Link Air products network together, out of the box, at the factory default settings.To hard-reset the D-Link Air DWL-700AP to Factory Default Settings, please do thefollowing:Locate the Reset button on the back of the DWL-700APUse a paper clip to press the Reset buttonHold for about 5 seconds and then releaseAfter the DWL-700AP reboots (this may take a few minutes) it will be resetto the factory default settings.
38Technical SpecificationsIEEE 802.11!StandardsPort: 10/100 Mbps Fast Ethernet!IEEE 802.11b!IEEE 802.3!IEEE 802.3u!1, 2, 5.5, 11Mbps (with Automatic Fallback)!Data Rates:Supports 64-bit,128,256-bit RC4Encryption:!Media Access Controll:CSMA/CA with ACK!2.4 – 2.462GHz!Frequency Range:Operating Range:Indoors - up to 328 feet (100 meters)*!Modulation Technology:DSSS - Direct Sequence Spread Spectrum!11-chip Barker sequence!
39Barker (1Mbps/0db)!Barker (2Mbps/3db)!CCK (5.5Mbps/5.5db)CCK (11Mbps/8.5db)5% - 95%, non-condensingHumidity:!Modulation Techniques!!Technical Specifications (continued)16dBmTransmitter Output Power:!Operating Temperature:5ºC to 40ºC!Power (Green)Link (Green)TX/RX (Green)LEDs:!!!Power Input:External PowerSupply: DC 5V, 2.5A!Warranty:1 Year!Weight:.11 lbs. (51g)!Safety & Emissions FCC CSA!!Device ManagementWeb-Based - InternetExplorer v5 or later;Netscape Navigator v4 orlater; or other Java-enabledbrowsers.!Tolerates up to +17dBm atthe AntennaOver-Driving Levels:!External Antenna Type:1.8dBi gain with reverse SMAconnector!L = 5.5 inches(140mm)W = 4.5 inches(114mm)H = 1 inches(25.4mm)Physical Dimensions:!!!
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. INFORMATION TO USER: The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Technical SupportYou can find software updates and user documentation on the D-Link website.D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product.U.S. and Canadian customers can contact D-Link technical support through ourwebsite, or by phone.Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a week.D-Link Technical Support over the Internet:http://support.dlink.comemail:support@dlink.comTech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 8:30am to 9:00pm ESTD-Link Technical Support over the Internet:http://support.dlink.caemail:support@dlink.ca061203

Navigation menu