D Link 2003070026-1 802.11b 2.4G Wireless PC Card Adapter User Manual dwl650m1 manual 100 061603

D Link Corporation 802.11b 2.4G Wireless PC Card Adapter dwl650m1 manual 100 061603

Contents

Users Manual

ManualD-Link Air DWL-6502.4GHzBuilding Networks for PeopleTM Wireless PC Card Adapterversion P
2ContentsPackage Contents ................................................................................3Introduction............................................................................................4Wireless Basics ....................................................................................6Getting Started ......................................................................................8Using the Configuration Utility ..............................................................11Networking Basics ..............................................................................18Troubleshooting...................................................................................31Technical Specifications ......................................................................36Contacting Technical Support ..............................................................38Warranty and Registration ...................................................................39
3Package ContentsThis manual applies specifically to the DWL-650 revision M1.Please refer to earlier versions of this manual if you have a previousversion of the DWL-650.Contents of Package:D-Link Air DWL-6502.4 GHz Wireless PC Card AdapterManual and Drivers on CDQuick Installation GuideIf any of the above items are missing, please contact your reseller.!!!System Requirements:Windows XP/2000/Me/98SE! A computer or laptop with an available PC card slot!At least 32 MB of memory and a 300 MHz processor!An 802.11b Access Point (e.g., DWL-900AP+) for Infrastructuremode, or an 802.11b wireless adapter for Ad-Hoc mode(e.g., DWL-520.)!
4IntroductionThe D-Link Air DWL-650 Wireless PC Card Adapter is an 802.11b wireless adapter thatsupports high-speed wireless networking at home, at work or in public places.The DWL-650 is compatible with existing 802.11b devices such as the D-Link Air andAirPlus family of products including the DWL-520 and DWL-520+ Wireless PCI Adapt-ers, the DI-614+ Wireless Router, DWL-900AP+ Wireless Access Point and the DWL-122 Wireless USB Adapter.The DWL-650 is an ideal way to connect your laptop computer to a Wireless Local AreaNetwork (WLAN). After completing the steps outlined in the Quick Installation Guide(included in the package) you will have the ability to share information and resources,such as files and printers, and enjoy the freedom that wireless networking delivers.The DWL-650 comes with software drivers for the most popular Microsoft Windowsoperating systems and can be integrated into a larger network, running Windows XP,Windows 2000, Windows Me, or Windows 98SE in either Ad Hoc mode (without anAccess Point or Router) or Infrastructure mode (with an Access Point or Router).The IEEE 802.11b Ethernet standard allows you to connect computers and 802.11bcompatible devices at speeds up to 11Mbps, dependent upon the distance betweenwireless adapters, the configuration of your working environment, or the capabilities orlimitations of your computer systems.
5Link: Solid green light indicates connection to the networkACT: Blinking amber light indicates activity on the networkLEDSLED stands for Light-Emitting Diode.Features & Benefits!Provides a simple and inexpensive way to connect your laptop computer to awireless network at home, at the office, or in public placesProvides a measure of security for the information transmitted over a wirelessnetwork with high data encryption at 64 or 128-bit WEP.!Supports infrastructure networks via an access point and peer-to-peer commu-nication in ad-hoc mode!!User-friendly configuration and diagnostic utilities!Maximum reliability, throughput and connectivity with automatic data rateswitching!Operates in the 2.4GHz frequency range!Fully compliant with the 802.11b standard and interoperable with all existing802.11b-compliant devices!Quick and Easy Installation- The DWL-650 installs quickly and easily into aPC Card slot in a laptop computer. By following the simple steps outlined inthe Quick Installation Guide, you can connect to an available wirelessnetwork in a matter of seconds! High Performance 16-bit PC Card - The high capacity PC Card interfaceutilized by the DWL-650 ensures optimal performance in transmitting awireless signal within the laptop computer.!Provides high-speed wireless connection up to 11Mbps
6Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use andcompatible high-speed wireless connectivity within your home, business or public accesswireless networks. D-Link wireless products will allow you access to the data you want,when and where you want it. You will be able to enjoy the freedom that wireless networkingbrings.A Wireless Local Area Network (WLAN) is a cellular computer network that transmitsand receives data with radio signals instead of wires. WLANs are used increasingly inboth home and office environments, and public areas such as airports, coffee shops anduniversities. Innovative ways to utilize WLAN technology are helping people to work andcommunicate more efficiently. Increased mobility and the absence of cabling and otherfixed infrastructure have proven to be beneficial for many users.Wireless users can use the same applications they use on a wired network. Wirelessadapter cards used on laptop and desktop systems support the same protocols asEthernet adapter cards.People use WLAN technology for many different purposes:Mobility - Productivity increases when people have access to data in any locationwithin the operating range of the WLAN. Management decisions based on real-timeinformation can significantly improve worker efficiency.Low Implementation Costs – WLANs are easy to set up, manage, change andrelocate. Networks that frequently change can benefit from WLANs ease of implementation.WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fastand easy and can eliminate the need to pull cable through walls and ceilings. Wirelesstechnology allows the network to go where wires cannot go - even outside the home oroffice.Scalability – WLANs can be configured in a variety of ways to meet the needs ofspecific applications and installations. Configurations are easily changed and rangefrom peer-to-peer networks suitable for a small number of users to larger infrastructurenetworks to accommodate hundreds or thousands of users, depending on the number ofwireless devices deployed.Inexpensive Solution - Wireless network devices are as competitively priced asconventional Ethernet network devices.
7The DWL-650 is compatible with 802.11b wireless products, which include:D-Link AirPlus DWL-650+2.4GHz Wireless PC Card Adapter used with laptop computersD-Link Air DWL-520, D-Link AirPlus DWL-520+2.4GHz Wireless PCI cards used with desktop computersD-Link AirPlus DWL-900AP+Enhanced 2.4GHz Wireless Access PointD-Link AirPlus DI-614+, DI-714P+Enhanced 2.4GHz Wireless Broadband RoutersStandards-Based TechnologyBased on the IEEE 802.11b standard, the DWL-650 is also interoperable with existingcompatible 2.4GHz wireless technology with data transfer speeds of up to 11Mbps.Installation ConsiderationsThe D-Link Air DWL-650 lets you access your network, using a wireless connection,from virtually anywhere within its operating range. Keep in mind, however, that the number,thickness and location of walls, ceilings, or other objects that the wireless signals mustpass through, may limit the range. Typical ranges vary depending on the types of materialsand background RF (radio frequency) noise in your home or business. The key tomaximizing wireless range is to follow these basic guidelines:Wireless Basics (continued)!!!!Keep your product away (at least 3-6 feet or 1-2 meters) from electricaldevices or appliances that generate RF noise.4Keep the number of walls and ceilings between the DWL-650 andother network devices to a minimum - each wall or ceiling can reduceyour D-Link Air Wireless product’s range from 3-90 feet (1-30 meters.)Position your devices so that the number of walls or ceilings is minimized.1Be aware of the direct line between network devices. A wall that is 1.5 feet thick(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. Ata 2-degree angle it looks over 42 feet (14 meters) thick! Position devices sothat the signal will travel straight through a wall or ceiling (instead of at anangle) for better reception.2Building Materials can impede the wireless signal - a solid metal door or aluminumstuds may have a negative effect on range. Try to position wireless devices andcomputers with wireless adapters so that the signal passes through drywall oropen doorways and not other materials.3
8There are basically two modes of networking:Infrastructure – using an Access Point or Router, such asthe DI-614+Ad-Hoc – directly connecting to another computer, for peer-to-peer communication, using wireless network adapters oneach computer, such as two or more DWL-650 wirelessnetwork adapters.On the following pages we will show you an example of an Infrastructure Networkand an Ad-Hoc Network.An Infrastructure network contains an Access Point or Router. The InfrastructureNetwork example shown on the following page contains the following D-Link networkdevices (your existing network may be comprised of other devices):Getting StartedA wireless Router - D-Link AirPlus DI-614+A laptop computer with a wireless adapter -D-Link Air DWL-650A desktop computer with a wireless adapter -D-Link Air DWL-520A Cable modem - D-Link DCM-200!!!!!! With its default settings, the DWL-650, when activated, will connectwith other D-Link Air products, right out of the box.
9Please remember that D-Link Air wireless devices are pre-configured to connecttogether, right out of the box, with their default settings.You will need broadband Internet access (a Cable or DSL-subscriber line intoyour home or office)Consult with your Cable or DSL provider for proper installation of the modemConnect the Cable or DSL modem to your broadband router (see the QuickInstallation Guide included with your router.)Install the D-Link Air DWL-520 wireless PCI adapter into an available PCI sloton your desktop computer.(See the Quick Installation Guide included with the DWL-520.)Install the D-Link Air DWL-650 wireless PC Card adapter into a laptop computer.(See the Quick Installation Guide included with the DWL-650.)Getting Started (continued)For a typical wireless setup at home (as shown above), please do thefollowing:Setting up a Wireless Infrastructure Network421365If you wish, you may connect a computer that is equipped with an Ethernetnetwork adapter (such as a DFE-530TX+) to the router also.
10Getting Started (continued)Setting up a Wireless Ad Hoc NetworkInstall the Wireless PCI adapter(e.g., DWL-520) into the desktop computer.(See the Quick Installation Guide included with the product for installationinstructions.)Install the DWL-650 wireless PC Card adapter into a laptop computer. (Seethe Quick Installation Guide included with the product.)Set the wireless configuration for the adapters to Ad-Hoc mode, set theadapters to the same channel, and assign an IP Address to each computeron the Ad-Hoc network. (See Box below)IP AddressDesktopWhen assigning IP Addresses to the computers on the network, please rememberthat the IP Address for each computer must be in the same IP Address rangeas all the computers in the network, and the subnet mask must be exactly thesame for all the computers in the network.For example: If the first computer is assigned an IP Address of 192.168.0.2 with aSubnet Mask of 255.255.255.0, then the second computer can be assigned an IPAddress of 192.168.0.3 with a Subnet Mask of 255.255.255.0, etc.IMPORTANT: If computers or other devices are assigned the same IP Address,one or more of the devices may not be visible on the network.
11Select the Wireless Networks tab.Uncheck the box in the properties windowthat enables windows configuration.D-Link Air DWL-650 uses the Configuration Utility as the management software.The utility provides the user an easy interface to change any settings related to thewireless adapter. After you have completed the installation of the DWL-650 (refer to theQuick Installation Guide that came with your purchase) whenever you start the computer,the Configuration Utility starts automatically and the system tray icon is loaded in thetoolbar (see illustration below*.) Clicking on the utility icon will start the ConfigurationUtility. Another way to start the Configuration Utility is to click on Start>Programs>D-Link Air>D-Link Air Utility.Using the Configuration UtilityIf you are using Windows XP, you can use either the Zero Configuration Utility or theD-Link Configuration Utility.If the icon does not display in the taskbar, then click onthis icon on your desktop to open.To use the D-Link Configuration Utility with XP, right-clickon the Wireless network icon in the taskbar in the lowerright-hand corner of your computer screen.In the window that appears, select ViewAvailable Wireless Networks and clickthe Advanced button. The screen at rightwill appear.After you have done this, you can then use the D-LinkConfiguration Utility with XP by clicking on the D-LinkConfiguration Utility icon. *Config Utility icon in system traytest1test2
12Link InfoUsing the Configuration Utility (continued)After clicking on the Configuration Utility icon, the Link Info screen will display thesettings for the DWL-650:SSID:The Service Set Identifier is the nameassigned to the wireless network.The factory SSID setting is default.Tx Rate:The default setting is Auto; Tx Rate settings are automatically determined for anoptimal speed up to a maximum of 11Mbps.Status:Displays the MAC Address of theAccess Point or Router to which theDWL-650 is associatedChannel:The default setting is Auto. The channel selection is automatically determined by theDWL-650.Signal Strength/Link Quality:Packet Count:Displays the statistics of the data packets that are transmitted and received.Frequency:802.11b indicates that the DWL-650is communicating in the 2.4GHzband.Encryption:You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.Wireless Mode:Either Infrastructure or Ad-Hoc will be displayed here. (Please see the GettingStarted section in this manual for an explanation of these two modes.)Rescan Button:Rescans for the strongest signal in your environment and associates with that AccessPoint or RouterDisplays the Link Quality for the DWL-650 wireless connection to the access point.The Signal Strength represents the wireless signal between the access point and theDWL-650. The percentage coincides with the graphical bar
13Wireless Mode:Authentication:Keys 1-4:Select the default keyData Encryption:IP Settings:Click on the pull-down menu; select from thefollowing options:Infrastructure - connecting to the WLANusing an Access Point.(This is the defaultsetting).Ad-Hoc – wireless mode used whenconnecting directly to a computer equippedwith a wireless adapter in a peer-to-peerenvironment.Choose one of the following modes:Click Apply to save changes.When you click IP Settings in the Configuration window, the pop-up screen above willappear. Configure the IP Settings in this window.Hexadecimal digits consist of the numbers 0-9 and the letters A-FASCII (American Standard Code for Information Interchange) is a code forrepresenting English letters as numbers from 0-127Using the Configuration Utility (continued)ConfigurationSelect Enabled or Disabled.IP SettingsOpen Authentication – the DWL-650 isvisible to all devices on the networkShared Authentication – allowscommunication only with other devices withidentical WEP settingsAuto – will automatically adjust to the Authentication mode of the wirelessAccess Point or RouterKey Length:Select the key length and either ASCII (e.g., a word) or hexadecimal format.SSID:Service Set Identifier is a name that identifies awireless network. Access Points and wirelessdevices attempting to connect to a specific WLAN(Wireless Local Area Network) must use the sameSSID. The default setting is default.
14Ad-Hoc Channel:All devices in the Ad Hocnetwork must be set to thesame channelClick Apply if you have made any changesData Packet Parameter:Select the parameters hereProfile IP Settings:You can Enable or Disablethe IP Settings portion ofyour profile here. If youselect Disable you will needto configure the IP Addressinformation each time youconnect to a network. If youselect Enable you willmaintain the same IPAddress information eachtime you connect to anetwork.Select Enable or DisableLaunch Utility on Startup:Power Mode:Disable -this default setting consumes the most powerEnable - this setting consumes the least powerFragmentation Threshold:This value should remain at its default setting of 2432. If you experience a high packeterror rate, you may slightly increase your Fragmentation Threshold within the valuerange of 256 to 2432. Setting the Fragmentation Threshold too low may result in poorperformance.This value should remain at its default setting of 2432. If inconsistent data flow is aproblem, only a minor modification should be made.RTS Threshold:Using the Configuration Utility (continued)Advanced
15Refresh:Click on Refresh to get themost updated list of availablenetworks.Available Network:The top section of the window displays the Available Networks. Scroll up and down thelist and highlight the network to which you wish to connect. Click on the Connect but-ton.Profile:In the lower half of the screen, you can manage the profiles that you have created for thewireless network at home, at the office and in public places. Scroll up and down andhighlight the profile that you wish to configure. You can Add or Remove a profile, orconfigure the Properties of the profile in order to connect with an available network.Connect:Highlight a network profile; click Connect to connect to that network.Rescan:Click Rescan to rescan and connect to the strongest signal.Configure:Highlight an existing networkand click Configure; theconfiguration window on thenext page will appear.Advanced:Highlight a network; clickAdvanced and the screen onthe next page will appear.Add:Click Add and the screen on the next page will appear.Remove:Highlight a network profile; click Remove to remove a network from the profile list.Properties:Highlight a network profile; click Properties and the screen on the next page will appear.Using the Configuration Utility (continued)Site Survey
16Using the Configuration Utility (continued)Site Survey > AddIf you clicked on Add, you canconfigure, in this window, all theproperties of a profile that youwish to add to the network.In this window you can selectthe type of network connection.Click OK to save thechanges.If you clicked on Configurationor Properties you can config-ure, in this window, all the prop-erties of a profile that alreadyexists in the network.Click OK to save thechanges.AdvancedConfiguration, Add or Properties
17The ABOUT screen gives you the MAC Address, Utility Version and the Driver Versionof the DWL-650.Using the Configuration Utility (continued)About
18Using the Network Setup Wizard in Windows XPIn this section you will learn how to establish a network at home or work, usingMicrosoft Windows XP.Note: Please refer to websites such as http://www.homenethelp.comand http://www.microsoft.com/windows2000 for information about networkingcomputers using Windows 2000, ME or 98SE.Go to Start>Control Panel>Network ConnectionsSelect Set up a home or small office networkNetworking BasicsWhen this screen appears, click Next.
19Please follow all the instructions in this window:Networking Basics (continued)Click NextIn the following window, select the best description of your computer. If yourcomputer connects to the internet through a gateway/router, select the second optionas shown.Click Next
20Enter a Computer description and a Computer name (optional.)Networking Basics (continued)Click NextEnter a Workgroup name. All computers on your network should have the sameWorkgroup name.Click Next
21Please wait while the Network Setup Wizard applies the changes.Networking Basics (continued)When the changes are complete, click Next.Please wait while the Network Setup Wizard configures the computer.This may take a few minutes.
22Networking Basics (continued)In the window below, select the option that fits your needs. In this example,Create a Network Setup Disk has been selected. You will run this disk oneach of the computers on your network. Click Next.Insert a disk into the Floppy Disk Drive, in this case drive A.
23Networking Basics (continued)Please read the information under Here’s how in the screen below. After you completethe Network Setup Wizard you will use the Network Setup Disk to run the NetworkSetup Wizard once on each of the computers on your network. To continue click Next.
24Networking Basics (continued)Please read the information on this screen, then click Finish to complete theNetwork Setup Wizard.The new settings will take effect when you restart the computer. Click Yes to restartthe computer.You have completed configuring this computer. Next, you will need to run the NetworkSetup Disk on all the other computers on your network. After running the NetworkSetup Disk on all your computers, your new wireless network will be ready to use.
25!Networking Basics (continued)Naming your ComputerTo name your computer, please follow these directions:In Windows XP:Click Start (in the lower left corner of the screen)Right-click on My ComputerSelect Properties and click!!!!!Select the ComputerName Tab in the SystemProperties window.You may enter a Com-puter Description if youwish; this field is optional.To rename the computerand join a domain, ClickChange.
26Networking Basics (continued)Naming your Computer!In this window, enter theComputer nameSelect Workgroup and enterthe name of the WorkgroupAll computers on your networkmust have the sameWorkgroup name.Click OK!!!Checking the IP Address in Windows XPThe wireless adapter-equipped computers in your network must be in the same IPAddress range (see Getting Started in this manual for a definition of IP Address Range.)To check on the IP Address of the adapter, please do the following:Right-click on theLocal AreaConnection iconin the task barClick on Status!!
27Networking Basics (continued)Checking the IP Address in Windows XPThis window will appear.Click theSupport tabClick Close!!Assigning a Static IP Address in Windows XP/2000Note: Residential Gateways/Broadband Routers will automatically assign IP Ad-dresses to the computers on the network, using DHCP (Dynamic Host Configura-tion Protocol) technology. If you are using a DHCP-capable Gateway/Router youwill not need to assign Static IP Addresses.If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IPAddress, please follow these instructions:!!Go to StartDouble-click onControl Panel
28Networking Basics (continued)Assigning a Static IP Address in Windows XP/2000!Double-click onNetworkConnections!!Double-click onPropertiesRight-click on Local AreaConnections
29Networking Basics (continued)Assigning a Static IP Addressin Windows XP/2000You have completed the assignment of a Static IP Address. (You do not need to assigna Static IP Address if you have a DHCP-capable Gateway/Router.)Click on Internet Protocol(TCP/IP)Click Properties!!IP Address:e.g., 192.168.0.2Subnet Mask:255.255.255.0Default Gateway:Enter the LAN IP address ofthe wireless router. (D-Linkwireless routers have a LAN IPaddress of 192.168.0.1) In the window below, select Use the following IP address. Input your IPaddress and subnet mask. (The IP Addresses on your network must bewithin the same range. For example, if one computer has an IP Address of192.168.0.2, the other computers should have IP Addresses that aresequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must bethe same for all the computers on the network.)!!Click OK Select Use the followingDNS server address. Enterthe LAN IP address of theWireless Router. (D-Linkwireless routers have a LANIP address of 192.168.0.1)!!D-Link Air DWL-650 Wireless PC Card Adapter
30Networking Basics (continued)Checking the Wireless Connectionby Pinging in Windows XP and 2000*Checking the Wireless Connectionby Pinging in Windows Me and 98*Go to Start > Run >type cmd. A windowsimilar to this onewill appear. Typepingxxx.xxx.xxx.xxx,where xxx is the IPAddress of theWireless Router orAccess Point. Agood wirelessconnection will showfour replies from theWireless Router orAcess Point, asshown.Go to Start > Run> type command.A window similar tothis will appear.Type pingxxx.xxx.xxx.xxxwhere xxx is the IPAddress of theWireless Router orAccess Point. Agood wirelessconnection willshow four repliesfrom the wirelessrouter or accesspoint, as shown.!!*You may be pinging different IP Addresses than the ones pictured here, however theprocedure for pinging remains the same.)
311. Check that the drivers for the DWL-650 are installed properly.Click DeviceManager!Select theHardwareTab!TroubleshootingThis chapter provides solutions to problems that can occur during the installation andoperation of the DWL-650. Read the following descriptions if you are having problems.(The examples below are illustrated in Windows XP. If you have another operating sys-tem, these solutions will still apply although the appearance on your computer screenmay differ.)!Go to Start > MyComputer >Properties
32Troubleshooting (continued)!!!Double-clickon NetworkAdaptersRight-click on D-Link AirDWL-650 WirelessPC Card AdapterSelect Propertiesto check that thedrivers areinstalled properly!Look under DeviceStatus to check that thedevice is workingproperly!Click OK
33Check to see if the DWL-650 PC Card adapter is firmly inserted into thePC Card slot of your laptop.2. I cannot connect to the access point or the wireless router.Make sure that the SSID on the DWL-650 PC Card adapter is exactlythe same as the SSID on the Access Point or wireless router.Move the DWL-650 and Access Point or Wireless router into the sameroom and then test the wireless connection.Disable all security settings. (WEP, MAC Address Control, AES)Make sure that the Radio is not locked down to a different frequencyTurn off your Access Point and the computer with the DWL-650. Turn onthe Access Point, and then turn on the computer with the DWL-650.Refresh the DWL-650 UtilityTroubleshooting (continued)!!!!!!5. The computer does not recognize the DWL-650 PC Card Adapter.3. The DWL-650 Power and Link lights are not on.!4. I forgot my Encryption key.Reset the Access Point to its factory default settings and restore the DWL-650 Wireless PC Card Adapter to the factory default settings. (The defaultsettings are listed in the Using the Configuration Utility section in thismanual.)!Make sure that the DWL-650 Wireless PC Card Adapter is properly seatedin the laptop’s PC Card slot.If Windows does not detect the hardware upon insertion of the adapter,make sure to completely remove drivers that were previously loaded. Toremove the drivers, do the following:!!
34Troubleshooting (continued)A. Under Tools> select Folder Options…> select View > underHidden files and folders > select Show hidden files andfoldersB. Uncheck Hide extension for known file types > click onApplyC. Search for the files DWL650.INF and DWL650.SYS. Removethese files from the INF and SYSTEM32 (DRIVERS) folders inthe Windows directory. Note: Windows XP and Windows 2000will rename .inf files that have not received WHQL certificationinto oem.inf files (e.g., oem1.inf.)Check that the LED indicators for the broadband modem are indicatingnormal activity. If not, there may be a problem with the broadband connection.Check that the LED indicators on the wireless router are functioning properly.If not, check that the AC power and Ethernet cables are firmly connected.Check that the IP Address, subnet mask, gateway, and DNS settings arecorrectly entered for the networkIn Infrastructure mode, make sure the same Service Set Identifier (SSID)is specified on the settings for the wireless clients and access points. TheSSID factory default setting for the D-LinkAir and AirPlus products is default.(Double-click on the WLAN icon in the taskbar. The Link Info screen willdisplay the SSID setting.)In Ad-Hoc mode, both wireless clients will need to have the same SSID.Please note that it might be necessary to set up one client to establish aBSS (Basic Service Set) and wait briefly before setting up other clients.This prevents several clients from trying to establish a BSS at the sametime, which can result in multiple singular BSSs being established, ratherthan a single BSS with multiple clients associated to it.6. The computer with the DWL-650 installed is unable to connect to the wireless network and/or the Internet.!!!!!
35Move the DWL-650 and Access Point or Wireless router into the sameroom and then test the wireless connection.Change the channel of the Access Point.Move devices within the line of sightCheck that the Network Connection for the wireless client is configuredproperly. Select AP (Infrastructure) when connecting to an access pointand select Ad-Hoc mode when connecting without an access point. Double-click on the WLAN icon in the taskbar > click on Configuration to changethe settings for the wireless adapter.If Security is enabled, make sure that the correct encryption keys areentered on both the DWL-650 and the access point. Double-click on theWLAN icon in the taskbar > click Encryption. Check to see that the keyselected is set to the same key as other devices on the network.!!!!!Troubleshooting (continued)7. How can I troubleshoot distance issues using the DWL-650.
36Technical SpecificationsIEEE 802.11b!StandardsSystem Requirements:Temperature Operating: 32ºF to 131ºF (0ºC to 55ºC) Storing: -4ºF to 167ºF (-20ºC to 75ºC)!!Operating: 10% - 90%, non-condensingHumidity:!Storage: 5% - 95%, non-condensing!Antenna Type:Integrated Microstrip Antennas!Emissions:FCC part 15b!L = 4.50 inches (114mm)W = 2.25 inches (54mm)H = .25 inches (6mm)Physical Dimensions:!!!Weight:.095 lbs. (43g)!Adapter Type:PC PC Card slot!Warranty:1 Year!An 802.11b Access Point (e.g., DWL-900AP+) for Infrastructuremode; or an 802.11b wireless adapter (e.g., DWL-520) for Ad-Hocmode!At least 32MB of memory and a 300 MHz processor!Windows XP/2000/Me/98SE!Laptop with PC Card Controller!
37Technical Specifications (continued)1, 2, 5.5, 11Mbps (with Automatic Fallback)1-11 United States (FCC)!Operating Channels:Data Rates:!Supports 64-bit or 128-bit WEP encryptionEncryption:!2.4 – 2.4835 GHz, Direct Sequence Spread Spectrum!Frequency Range:Media Access Control:CSMA/CA with ACK!19dBmTransmit Output Power:!Receiver Sensitivity: Nominal Temp Range-84dBm for 11Mbps @ 8% PER (Packet Error Rate)!-90dBm for 2Mbps @ 8% PER (Packet Error Rate)!Modulation TechniquesCCK (11Mbps)!CCK (5.5Mbps)!DQPSK (2Mbps)!DBPSK (1Mbps)!Modulation:Direct Sequence Spread Spectrum!Range:Indoors - up to 328 feet (100 meters)*!
38Technical SupportYou can find software updates and user documentation on the D-Link website.D-Link provides free technical support for customers within the United States andwithin Canada for the duration of the warranty period on this product.U.S. and Canadian customers can contact D-Link technical support through ourwebsite, or by phone.Tech Support for customers within the United States:D-Link Technical Support over the Telephone:(877) 453-546524 hours a day, seven days a week.D-Link Technical Support over the Internet:http://support.dlink.comemail:support@dlink.comTech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 8:30am to 9:00pm ESTD-Link Technical Support over the Internet:http://support.dlink.caemail:support@dlink.ca
39Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limitedwarranty for its product only to the person or entity that originally purchased the product from:•D-Link or its authorized reseller or distributor and•Products purchased and delivered within the fifty states of the United States, the District ofColumbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with anAPO or FPO.Limited Warranty: D-Link warrants that the hardware portion of the D-Link products describedbelow will be free from material defects in workmanship and materials from the date of original retailpurchase of the product, for the period set forth below applicable to the product type (“WarrantyPeriod”), except as otherwise stated herein.1-Year Limited Warranty for the Product(s) is defined as follows:•Hardware (excluding power supplies and fans) One (1) Year•Power Supplies and Fans One (1) Year•Spare parts and spare kits Ninety (90) daysD-Link’s sole obligation shall be to repair or replace the defective Hardware during the Warranty Periodat no charge to the original owner or to refund at D-Link’s sole discretion. Such repair or replacement willbe rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not benew or have an identical make, model or part. D-Link may in its sole discretion replace the defectiveHardware (or any part thereof) with any reconditioned product that D-Link reasonably determines issubstantially equivalent (or superior) in all material respects to the defective Hardware. Repaired orreplacement Hardware will be warranted for the remainder of the original Warranty Period from the dateof original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its solediscretion that it is not practical to repair or replace the defective Hardware, the price paid by the originalpurchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defectiveHardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price isrefunded, shall become the property of D-Link upon replacement or refund.Limited Software Warranty: D-Link warrants that the software portion of the product (“Software”)will substantially conform to D-Link’s then current functional specifications for the Software, as set forthin the applicable documentation, from the date of original retail purchase of the Software for a period ofninety (90) days (“Warranty Period”), provided that the Software is properly installed on approvedhardware and operated as contemplated in its documentation. D-Link further warrants that, during theWarranty Period, the magnetic media on which D-Link delivers the Software will be free of physicaldefects. D-Link’s sole obligation shall be to replace the non-conforming Software (or defective media)with software that substantially conforms to D-Link’s functional specifications for the Software or torefund at D-Link’s sole discretion. Except as otherwise agreed by D-Link in writing, the replacementSoftware is provided only to the original licensee, and is subject to the terms and conditions of thelicense granted by D-Link for the Software. Software will be warranted for the remainder of the originalWarranty Period from the date or original retail purchase. If a material non-conformance is incapable ofcorrection, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will berefunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returnedto D-Link. The license granted respecting any Software for which a refund is given automaticallyterminates.Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and softwareof D-Link’s products will not be applied to and does not cover any refurbished product and any productpurchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers,or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case,the product is being sold “As-Is” without any warranty whatsoever including, without limitation, theLimited Warranty as described herein, notwithstanding anything stated herein to the contrary.Submitting A Claim: The customer shall return the product to the original purchase point based on itsreturn policy. In case the return policy period has expired and the product is within warranty, thecustomer shall submit a claim to D-Link as outlined below:Warranty and Registration(USA only)
40•The customer must submit with the product as part of the claim a written description of theHardware defect or Software nonconformance in sufficient detail to allow D-Link to confirmthe same.•The original product owner must obtain a Return Material Authorization (“RMA”) number fromthe Authorized D-Link Service Office and, if requested, provide written proof of purchase ofthe product (such as a copy of the dated purchase invoice for the product) before thewarranty service is provided.•After an RMA number is issued, the defective product must be packaged securely in theoriginal or other suitable shipping package to ensure that it will not be damaged in transit, andthe RMA number must be prominently marked on the outside of the package. Do not include anymanuals or accessories in the shipping package. D-Link will only replace the defective portionof the Product and will not ship back any accessories.•The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery(“COD”) is allowed. Products sent COD will either be rejected by D-Link or become theproperty of D-Link. Products shall be fully insured by the customer. D-Link will not be heldresponsible for any packages that are lost in transit to D-Link. The repaired or replacedpackages will be shipped to the customer via UPS Ground or any common carrier selected byD-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges areprepaid by the customer and upon request.•Return Merchandise Ship-To AddressUSA: 53 Discovery Drive, Irvine, CA 92618Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailedwarranty information within Canada)D-Link may reject or return any product that is not packaged and shipped in strict compliance with theforegoing requirements, or for which an RMA number is not visible from the outside of the package. Theproduct owner agrees to pay D-Link’s reasonable handling and return shipping charges for any productthat is not packaged and shipped in accordance with the foregoing requirements, or that is determinedby D-Link not to be defective or non-conforming.What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Link’sjudgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse,faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in thedocumentation for the product, or if the model or serial number has been altered, tampered with, defacedor removed; Initial installation, installation and removal of the product for repair, and shipping costs;Operational adjustments covered in the operating manual for the product, and normal maintenance;Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;Any hardware, software, firmware or other products or services provided by anyone other than D-Link; Products that have been purchased from inventory clearance or liquidation sales or other sales inwhich D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to theproduct. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void thisWarranty.Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THEPRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING,WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSEAND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORYWHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TONINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDEDHEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT ISWITH THE PURCHASER OF THE PRODUCT.Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLEUNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORYFOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER,WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO,DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTERFAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON,OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTINGFROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANYBREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OFSUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY ISREPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM
41The manufacturer is not responsible for any radio or TV interference caused by unauthorizedmodifications to this equipment; such modifications could void the user’s authority to operate theequipment.Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Somestates do not allow exclusion or limitation of incidental or consequential damages, or limitations on howlong an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limitedwarranty provides specific legal rights and the product owner may also have other rights which varyfrom state to state.Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registeredtrademarks are the property of their respective manufacturers or owners.Copyright Statement: No part of this publication or documentation accompanying this Product maybe reproduced in any form or by any means or used to make any derivative such as translation,transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., asstipulated by the United States Copyright Act of 1976. Contents are subject to change without priornotice. Copyright© 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radiointerference, in which case the user may be required to take adequate measures.FCC Statement: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, uses, andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communication. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouragedto try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.•Consult the dealer or an experienced radio/TV technician for help.For detailed warranty outside the United States, please contact corresponding localD-Link office.Register your D-Link product online at http://support.dlink.com/register/ (06/17/2003) LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCTCOVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIESARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED ORSTATUTORY.FCC Caution:This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must acceptany interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This device has been tested for compliance with FCC RF Exposure (SAR) limits in the typicallaptop computer configuration and this device can be used in substantially similar" laptopRegister your D-Link product online at http://support.dlink.com/register/ (06/17/2003) LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCTCOVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIESARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED ORSTATUTORY.computers with side mounted PCMCIAslots. This device cannot be used with handheld PDAs(personal digitalassistants) or other portable host devices. This device and its antennamust not be co-located or operated in conjunction with any other antenna or transmitter.

Navigation menu