Cradlepoint IBR600E Industrial Broadband Router User Manual IBR600 QSG 4 30 13 sm

Cradlepoint, Inc. Industrial Broadband Router IBR600 QSG 4 30 13 sm

User manual

Z-Fold Format / Double SidedFRONT BACKCOR IBR600 (Integrated Broadband Router)QUICK START GUIDE1 )What’s In The BoxSETTING UP THE ROUTERPurchase a data plan. Then insert the SIM if model requires.Plug the power supply into an electrical outlet.Connect WiFi (2.4) and modem ( , , , ) antennas (finger tight only). Purchase and connect active GPS antenna for -PWD models.Connect the power supply to the IBR600.Ensure power is switched on. O = OFF I = ON2 )3 )ACCESSING THE ADMINISTRATION PAGESSPECIAL FEATURES6 7 852 3 4for more information about your product, visit: www.cradlepoint.comwww.cradlepoint.com/IBR600To learn more about features, visit:To make configuration changes to your router, open the IBR600’s GUI-based administration pages. 1) Connect via Ethernet or WiFi. For WiFi, the default SSID isIBR600-xxx (last 3 characters of the MAC address).2) Open a browser window and type “cp/” or “192.168.0.1” in theaddress bar. Press ENTER/RETURN.3) When prompted for your password, type the eight characterDEFAULT PASSWORD found on the product label.Find this label on the bottom of your router.Due to the nature of wireless communications, transmission and reception of data by the IBR600 device can never be guaranteed, and it is possible that data communicated or transmitted wirelessly may be delayed, corrupted (i.e., contain errors), or totally lost. The IBR600 device is not intended for, and CradlePoint recommends the device not be used in any critical applications where failure to transmit or receive data could result in property damage or loss or personal injury of any kind (including death) to the user or to any other party. CradlePoint expressly disclaims liability for damages of any kind resulting from: (a) delays, errors, or losses of any data transmitted or received using the device; or (b) any failure of the device to transmit or receive such data.Warning: This product is only to be installed by qualified personnel!For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.Industry Canada StatementThis device complies with RSS-210, RSS-102, and RSS-Gen of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE: Radiation Exposure StatementThis equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.This device has been designed to operate with an antenna having a maximum gain of 5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.Déclaration d’Industrie CanadaCe dispositif est conforme à la norme CNR-210, CNR-102, et CNR-Gen d’Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.NOTE IMPORTANTE (Pour l’utilisation de dispositifs mobiles): Déclaration d’exposition aux radiations Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de 5 dBi. Une antenne à gain plus élevé est strictement interdite par les règlements d’Industrie Canada. L’impédance d’antenne requise est de 50 ohms.IPSec VPN End-Point SupportGRE TunnelingData Usage Management & AlertsGPIO InterfaceGPS (if supported by modem carrier)Failover/FailbackWiFi Hotspot Services (Captive Portal)IP PassthroughWiFi as WAN & Dual SSIDsVLAN SupportWiPipeTM Central Remote ManagementUSB to Serial Console Passthrough SupportLAN/WAN AffinityBGP/OSPF/RIPVRRPTHE FIRST TIME SETUP WIZARDAC Power Supply Quick Start GuidePORTS & SWITCHESIntegrated Broadband RouterWith Modem & WiFi AntennasETHERNETDATA SOURCE( WAN )defaultETHERNET CONNECTIONSPOWER12VDCRESETWiFi ANTENNACONNECTOR (RSMA)orACTIVE GPS CONNECTOR (SMA)ON -PWD MODELSWiFi ANTENNACONNECTOR(RSMA)USB(Standard-A) WiFi ANTENNAS(2.4)Finger Tight OnlyMODEM ANTENNAS( , , , )Finger Tight OnlyWhen you log in for the first time, you are automatically directed to the FIRST TIME SETUP WIZARD, which will help you customize your COR IBR600. Change any of the following:Administrator passwordTime zoneWiFi network name, security mode, and passwordAccess Point Name (APN) for SIM-based modemsWAN failure check modeIf you are currently using the IBR600 WiFi network, you will need to reconnect your devices to the network using the newly established wireless network name and password.NOTE: To return to the First Time Setup Wizard after your initial login, select GETTING STARTED on the top navigation bar and FIRST TIME SETUP in the dropdown menu.This important Product Information and Safety Guide contains safety, handling, disposal, regulatory, trademark, copyright, and software licensing information. Read all safety information below and operating instructions before using the IBR600 device to avoid injury. FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.FCC CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTEFCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.SAFETY AND HAZARDS Under no circumstances should the IBR600 device be used in any areas (a) where blasting is in progress, (b) where explosive atmospheres may be present, or (c) that are near (i) medical or life support equipment, or (ii) any equipment which may be susceptible to any form of radio interference. In such areas, the IBR600 device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with such equipment). In addition, under no circumstances should the IBR600 device be used in any aircraft, regardless of whether the aircraft is on the ground or in flight. In any aircraft, the IBR600 device MUST BE POWERED OFF AT ALL TIMES (since the device otherwise could transmit signals that might interfere with various onboard systems on such aircraft). Furthermore, under no circumstances should the IBR600 device be used by the driver or operator of any vehicle. Such use of the device will detract from the driver’s or operator’s control of that vehicle. In some jurisdictions, use of the IBR600 device while driving or operating a vehicle constitutes a civil and/or criminal offense.OPEN SOURCE SOFTWARE This product contains software distributed under one or more of the following open source licenses: GNU General Public License Version 2, BSD License, Net-SNMP License, and PSF License Agreement for Python 3.3. For more information on this software, including licensing terms and your rights to access source code, contact CradlePoint at www.cradlepoint.com/opensource. WARRANTY INFORMATION CradlePoint, Inc. warrants this product against defects in materials and workmanship to the original purchaser (or the first purchaser in the case of resale by an authorized distributor) for a period of one (1) year from the date of shipment. This warranty is limited to a repair or replacement of the product, at CradlePoint’s discretion as purchaser’s sole and exclusive remedy. CradlePoint does not warrant that the operation of the device will meet your requirements or be error free. Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence, purchaser may return the product to the point of purchase for a full refund of the purchase price. If the purchaser wishes to upgrade or convert to another CradlePoint, Inc. product within the thirty (30) day period, purchaser may return the product and apply the full purchase price toward the purchase of another CradlePoint product. Any other return will be subject to CradlePoint, Inc.’s existing return policy.LIMITATION OF CRADLEPOINT LIABILITY The information contained in this Quick Start Guide is subject to change without notice and does not represent any commitment on the part of CradlePoint or its affiliates. CRADLEPOINT AND ITS AFFILIATES HEREBY SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL: (A) DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING WITHOUT LIMITATION FOR LOSS OF PROFITS OR REVENUE OR OF ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE THE DEVICE, EVEN IF CRADLEPOINT AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF SUCH DAMAGES ARE FORESEEABLE; OR (B) CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall the aggregate liability of CradlePoint and/or its affiliates arising under or in connection with the device, regardless of the number of events, occurrences, or claims giving rise to liability, exceed the price paid by the original purchaser of the device. PRIVACY CradlePoint collects general data pertaining to the use of CradlePoint products via the Internet including, by way of example, IP address, device ID, operating system, browser type and version number, etc. To review CradlePoint’s privacy policy, please visit: http://www.cradlepoint.com/privacy. OTHER BINDING DOCUMENTS; TRADEMARKS; COPYRIGHT By activating or using your IBR600 device, you agree to be bound by CradlePoint’s Terms of Use, User License and other Legal Policies, all as posted at www.cradlepoint.com/legal. Please read these documents carefully.© 2013 CradlePoint, Inc. All rights reserved. CradlePoint is not responsible for omissions or errors in typography or photography. CradlePoint, IBR600, WiPipe™, the WiPipe logo, and the CradlePoint logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are property of their respective owners.Part Number: 170581-005COMPUTERSor LOCAL DEVICES( LAN )defaultUPDATING FIRMWAREMounting BracketACTIVATE YOUR MODEMA wireless broadband data plan must be added to your IBR600. Wireless broadband data plans are available from wireless carriers such as Sprint, Verizon, AT&T, EE, Vodafone, and Clearwire. Mobile broadband, M2M, and router pricing plans are available. To add or transfer a line of service you will need to provide a unique identifier such as ESN for 3G EVDO modems or IMEI/MEID for LTE or HSPA+ modems. LTE and HSPA+ plans require a SIM. SIM provisioning for LTE and HSPA+ models is done the same way as for USB modems. Once provisioned insert the SIM into the router until it clicks into place, close the SIM door, and turn on the power switch. After adding a data plan to the Verizon 3G EVDO model the modem may need to be activated. Log into the IBR600 administration pages (see page 3) and select Internet from the top navigation bar and then Connection Manager from the dropdown menu. Find and select the CradlePoint “EVDO Modem” and click Control and then click Activate. When modem activation is complete, confirm the modem LED is solid green on the router.For more information on activation see www.cradlepoint.com/activation.The NM (no module) units do not have an integrated modem. An attached USB modem may require activation.POWERON/OFFPOWERLEDWiFILEDMODEMLEDSIGNALSTRENGTHLEDSAUXILIARY MODEMANTENNACONNECTOR(SMA)MAIN MODEMANTENNACONNECTOR(SMA)SIM SLOT(SIM-BASED VERSIONS ONLY)4 )See Product Manual for suggested antenna positions.ACTIVE GPS: -PWD MODELSThe IBR600LE-PWD, IBR600LP-PWD, and IBR600LP2-PWD now come with an active GPS connection at 3.3 V and 100 mA max.For full functionality you will need to purchase a powered GPS antenna separately. The -PWD models include only one WiFi antenna for operation in 1x1 WiFi mode.RESET: To restore the COR IBR600 to its factory default settings, press and hold the RESET button on the side of the device for ten seconds. Reset returns the login password to the DEFAULT PASSWORD and resets all configuration changes.Log in to the administration pages (see page 3). You may have changed the ADMINISTRATOR PASSWORDwhen you used the FIRST TIME SETUP WIZARD.Select SYSTEM SETTINGS on the top navigation bar, then SYSTEM SOFTWARE in the dropdown menu.Find the FIRMWARE UPGRADE section. This displays the current firmware version that is installed and indicate if updated firmware is available. Click AUTOMATIC (Internet) if new firmware is available. The IBR600 will download and install the firmware and automatically reboot itself. A status monitor will appear and indicate when this process is complete. This process may take several minutes depending on your Internet connection speed. 1) 2) 3) 4)CradlePoint regularly creates new firmware packages. You may need to update firmware to use the IBR600 with new modems and to access our latest features. Visit knowledgebase.cradlepoint.com for more information.HOW TO UPDATE FIRMWARECRADLEPOINT ENTERPRISE CLOUD MANAGERNEXT GENERATION NETWORK MANAGEMENT AND APPLICATION PLATFORM Rapidly deploy and dynamically manage networks at geographically distributed stores and branch locations with Enterprise Cloud Manager, CradlePoint’s next generation application platform that will improve productivity, increase reliability, reduce costs, and enhance the intelligence of your network and business operations.Subscription required. See cradlepoint.com/ecm for details.If your device does not have an active Internet connection, you need to download the latest firmware from www.cradlepoint.com/firmware to your desktop. Then use the MANUAL FIRMWARE UPLOAD option. CAN ICES-3 (B)/NMB-3(B) This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.Model No.:IBR600E/IBR650E/IBR600LE/IBR650LE/IBR600LE-PWD/IBR650LE-PWD/IBR600LP/IBR650LP/IBR600LP-PWD/IBR650LP-PWD/IBR600NM/IBR650NM/IBR650WIBR600LP2-EU/IBR650LP2-EU/IBR600LP2-EU-PWD/IBR650LP2-EU-PWD/IBR600P/IBR650P

Navigation menu