Coulisse ABC04 Motor for drive a panel blind by RF remote control User Manual

Coulisse B.V. Motor for drive a panel blind by RF remote control

user manual

Coulisse B.V., Vonderweg 48, 7468 DC Enter, The Netherlandsindoor use only22782,4107,5 +0/-1.534,5 664,599,3107,5 +0/-1.534,5664,5116,2125,5 +4.2/-4.234,5 664,5-+ABC-04-U_R0_!!PTC34-#PTC34-#PTC34-#User ManualAbsolute ControlPanel motor ABC-04 WARNING: Important safety instructions. Follow all instructions, since incorrect installation can lead to severe injury.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: 1. General information1.1 General dimensionsThe ABC-04 is a complete kit to motorize Panel Absolute systems. The kit fi ts on 3, 4 and 5 track rails. The motorunit is always situated on the left side of the system. The motorunit is operated with a Coulisse remote control only.The software in the motorunit is selfl earning and detects it’s endpoint automatically.3-way4-way5-way ABC-04Powersupply 12-24V DC - 0.6ARated power 7 W Chain speed 3,75 mtr/minMax. pullingforce 3 kgOperating temperature 5 - 60°CMax. channels to pair 32 channels1.2 Performances1.3 Connectors and buttons12-24V DC - 0.6A inputProgram buttonAntenna2. Programming and operating- Pair to a channel/remote2.1 Programming(also possible by using SingleSelect, see manual Remote control*)Set in Program mode:Shortly press program button Program mode:Blind is stepping...Choose channel by pressing the ChannelSelect buttonPair/unpair by pressing the program buttonExit Program mode:Shortly press program button to exit Press program button for more than 2 sec.- Manual ControlBlind moves as longas button is pressed(max. 15 sec.)Exit or press program button another time for more than >2 sec. and blind moves in opposite direction2.2 Operating- Control by remoteDisclaimer:© Copyright CoulisseAll rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, by any means, electronic, mechanical, photocopying, recording, digital or otherwise without the written permission of the publisher.Although this manual has been composed with the most care, Coulisse B.V. does not accept any responsibility for damage due to mistakes and/or faults in this manual.Coulisse B.V. reserves the right to revise the manual and to revise and/or changes its content at any time, without obligation to notify any person or entity of such revisions or changes.The most recent version replaces older versions of this manual. The most recent version is available at ww.coulisse.nl or contact your Coulisse contact person .We invite you to send remarks and comments about this manual to Coulisse at manuals@coulisse.nl. Additional blind settings: Available Switch rotation direction YesFavorite position YesBatteryMode YesWe refer to the manual of the Coulisse Remote control to set the additional blind settings.2.3 Additional blind settings- Reset to factory defaults2.4 Reset & initialisationNew motors can be initialized directly without resettingSet in Program mode: Shortly press program button Program mode: Blind is stepping...Hold program button for 10 sec. untill blind stops steppingSet in Program mode: Shortly press program button Program mode: Blind is stepping...Hold program button for 15 sec. untill blind stops stepping and steps onceShortly press program buttonIt is important that the panels move fi rst towards the motor. If not, press program button to stop and press it again to change the direction.Blind moves slowly and is detecting the endpoints...Blind is now ready for normal use.Blind is initialized when panels stops 5. Service & Support4. Safety & Cleaning4.1 Safety4.2 CleaningFollow these general rules when cleaning the outside of the device and its components:- Make sure the device is unplugged.- Use a damp, soft, lint-free cloth. Avoid getting moisture in openings.- Don’t use aerosol sprays, solvents, alcohol, or abrasives.Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: Do not make repairs yourself. Do not attempt to open the device or disassemble it. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.WARNING: - Do not let children play with the blind and/or remote control.- Only use powersupplies or batteries that comply with the specifi cations on the motor.- In case of malfunction, unplug the device or remove the batteries and contact your dealer.- Take care that the blind can move freely and is not blocked by objects.- Take care that the powersupply cable is out of reach for children.- Do not paint the device.- Keep the device dry .Online ResourcesFor the latest information and updated manuals go to www.coulisse.nl.Obtaining Warranty ServiceFirst follow the advice in this booklet and then go to your local dealer. If the product appears to be damaged or does not function properly, go to your local dealer for instructions on how to obtain warranty service.3. Tips & TroubleshootingPlease check www.coulisse.nl for the latest tips and troubleshooting guide.(see manual Remote control)- Reset to factory defaults & Erase all paired channels/remotes1. Connect the motorunit with the 12-24V DC - 0.6A powersupply2. Detect endpositions:- Initialisation (only possible after reset)10 sec.1 sec.1 sec. 15 sec.1 sec.1 sec.> 2 sec.Panels move slowly1 sec.GB1
11.4.2012FCC Manual Regulatory informationThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC ID: ZY4ABC04FCC Warning Messages:This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.1 FCC Information to UserThis product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certi-fications and approvals.2 FCC Guidelines for Human ExposureWarning:In order to comply with RF exposure limits, the user is advised to maintain a distance of at least 20 cm from the antenna structure of this device while it is in use.3 FCC Electronic Emission NoticesThis device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause harmful interference2. This device must accept any interference received, including interference that may cause unde-sired operation.4 FCC Radio Frequency Interference statementThis equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference when the equipment is operated in a commercial environment. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications.Operation of this equipment in a residential area may cause harmful interference, in which case the userwill be required to correct the interference at his own expense.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and receiver• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected• Consult the dealer or an experienced radio/TV technician for help

Navigation menu