Convergence Systems CS2083G Intelligent Integrated RFID Reader with 3G/GSM and GPS User Manual

Convergence Systems Limited Intelligent Integrated RFID Reader with 3G/GSM and GPS

User Manual

CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 1 CSL CS208-3G Intelligent Integrated RFID Reader with GPS User’s Manual Version 1.0.0 &6/7KH2QH6WRS6KRSIRU5),'6ROXWLRQV
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 21 Content 1CONTENT ....................................................................................................................................................... 22FCC STATEMENT ......................................................................................................................................... 53INTRODUCTION ............................................................................................................................................ 63.1PRODUCT PACKAGE ...................................................................................................................................... 83.1.1BASIC PACKAGE CONTENT ....................................................................................................................... 83.1.2OPTIONAL ACCESSORIES .......................................................................................................................... 93.1.3USEFUL COMPONENTS CUSTOMER HAS TO SOURCE .............................................................................. 124HARDWARE INSTALLATION .................................................................................................................. 134.1HARDWARE CONTENT OF CS208-3G .......................................................................................................... 134.1.1CS208-3G READER OVERVIEW ............................................................................................................. 134.2OPERATING SETUP ...................................................................................................................................... 164.2.1INSTALLATION ........................................................................................................................................ 165SOFTWARE APPLICATION ..................................................................................................................... 205.1SOFTWARE CONTENT OF SHIPMENT PACKAGE ............................................................................................ 205.2PC SIDE PREREQUISITES ............................................................................................................................. 205.3DEFAULT SETTING ...................................................................................................................................... 215.3.1FORMAT OF DEFAULT.INI FOR INITIAL SETTING OF CS208 RFID READER ............................................... 225.4CS208 BURN-IN DEMO PROGRAM STARTUP PROCEDURE ............................................................................ 245.4.1SERVER (FAR-END COMPUTER) SETUP ................................................................................................... 245.4.2CLIENT SETUP ........................................................................................................................................ 255.4.3CS208 NORMAL MODE .......................................................................................................................... 295.4.3.1CS208 READER IN NORMAL MODE ................................................................................................... 295.4.3.2SERVER (REMOTE COMPUTER) IN NORMAL MODE ............................................................................ 315.4.4CS208-3G SELF-TEST MODE ................................................................................................................. 325.4.5CS208 SELF TEST MENU ....................................................................................................................... 345.4.5.1RESET TO FACTORY SETTING (SHIFT-0) ............................................................................................ 345.4.5.2CHANGE GSM ANTENNA (SHIFT-1) ................................................................................................. 355.4.5.3SET TEST SERVER IP (SHIFT-2) ........................................................................................................ 365.4.5.4CHANGE APN NAME (SHIFT-3) ....................................................................................................... 365.4.5.5SET TEST SMS PHONE NUMBER (SHIFT-4) ...................................................................................... 375.4.5.6SET BUZZER VOLUME (SHIFT-5) ...................................................................................................... 375.4.5.7SET GPS ANTENNA (SHIFT-7) .......................................................................................................... 385.4.5.8TEST BUZZER TONE (SHIFT-8) ......................................................................................................... 39
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 35.4.5.9BURN-IN PROGRAM (B) ..................................................................................................................... 395.4.5.10TEST LED (1) .................................................................................................................................... 405.4.5.11TEST BUZZER (2) ............................................................................................................................... 415.4.5.12TEST RFID READER (3) .................................................................................................................... 415.4.5.13TEST SMS (4).................................................................................................................................... 425.4.5.14CHECK INTERNET CONNECTION WITH SERVER (5) .............................................................................. 425.4.5.15PING LOCAL AREA NETWORK SERVER (6) ........................................................................................... 435.4.5.16READ GSM RSSI AND REGISTRATION STATU S (7) ............................................................................ 445.4.5.17GET GPIO STATUS (8) ....................................................................................................................... 455.4.5.18SD CARD TEST (9) ............................................................................................................................ 455.4.5.19GPS TEST (0) .................................................................................................................................... 465.4.5.20WRITE TAG TEST (S) ......................................................................................................................... 475.4.5.21KILL TAG TEST (T) ............................................................................................................................ 485.4.5.22RUN MAIN PROGRAM (NORMAL MODE) (N)...................................................................................... 495.4.6DEBUG PORT SETUP (OPTIONAL) ........................................................................................................... 505.5CS208 CONFIGURATION ............................................................................................................................. 535.5.1INITIAL SETUP ........................................................................................................................................ 535.5.2SET MODES TO SEND DATA VIA GPRS AND ETHERNET ............................................................................ 565.5.2.1CS208 SENDS DATA VIA ETHERNET ................................................................................................... 565.5.2.2CS208 SENDS DATA VIA GPRS .......................................................................................................... 605.6CS208 FIRMWARE UPGRADE ...................................................................................................................... 645.6.1FIRMWARE UPGRADE OVERVIEW ........................................................................................................... 645.6.1.1CS208 FIRMWARE UPGRADE FLOW DIAGRAM .................................................................................. 645.6.2FIRMWARE UPGRADE PROCEDURE ......................................................................................................... 655.6.2.1PC IP CONFIGURATION BEFORE CS208 FIRMWARE UPGRADE ............................................................ 665.6.2.2CS208 DEVICE APPLICATION FIRMWARE UPGRADE VIA ETHERNET ................................................... 685.6.2.3CS208 OPERATING SYSTEM FIRMWARE UPGRADE VIA ETHERNET ..................................................... 715.6.2.4CS208 BOOTLOADER FIRMWARE UPGRADE VIA ETHERNET ............................................................... 745.6.3FIRMWARE UPGRADE VIA USB CONNECTION ......................................................................................... 775.6.3.1FIRMWARE UPGRADE VIA USB CONNECTION (WINDOW 7) ............................................................... 775.6.3.2FIRMWARE UPGRADE VIA USB CONNECTION (WINDOW XP) ............................................................ 805.6.4RESET CS208 TO FACTORY SETTING ...................................................................................................... 846REMOTE ACCESS CS208 VIA ETHERNET AND USB USING REMOTE DESKTOP ..................... 856.1REMOTE ACCESS CS208 VIA ETHERNET...................................................................................................... 856.2REMOTE ACCESS APPLICATION VIA USB ..................................................................................................... 877SOFTWARE TOOLS FOR CS208 SETUP ................................................................................................ 897.1WIRESHARK - NETWORK PROTOCOL ANALYZER .......................................................................................... 89
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 47.2PORT FORWARDING ..................................................................................................................................... 93(TO BE DEFINED) .................................................................................................................................................. 938REGULATORY INFORMATION .............................................................................................................. 948.1FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT ........................ 948.2MAXIMUM PERMISSIBLE EXPOSURE (MPE) ................................................................................... 958.2.1INTRODUCTION ................................................................................................................................... 958.2.2REQUIREMENTS ................................................................................................................................... 958.2.3RADIO FREQUENCY RADIATION EXPOSURE EVALUATION .................................................. 96APPENDIX A. CS208 GPIO SIMPLE TEST CIRCUIT .................................................................................... 98APPENDIX B. SMS ERROR CODE LIST ....................................................................................................... 100APPENDIX C. TECHNICAL SUPPORT .......................................................................................................... 105APPENDIX D. RFID BASICS ............................................................................................................................ 106APPENDIX E. OPERATION PROFILES FOR RFID ..................................................................................... 107APPENDIX F. RFID CHANNELS ..................................................................................................................... 108
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 52 FCC Statement FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination is expressly forbidden.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 63 Introduction CS208-3G Integrated Reader Features: • Intelligent Integrated Reader with embedded edge server • 3G/GSM/GPRS, SMS, Ethernet, USB and Serial • Multiple choices of edge servers with intelligent event engine, and with APIs ranging from high level HTTP to C# to low level C, are available • Ruggedized (MIL-STD-810) integrated reader with long read range • Dense Reader Mode (DRM) available • Unique offering: choice of Left Hand Circular Polarization or Right Hand Circular Polarization for dock door implementation • Best of breed antenna performance: excellent axial ratio to give best read zone control • Built-in Global Positioning System CS208-3G is used to track vehicles or pallets or human workers passing by a road. Since the CS208-3G cannot be in the way blocking the vehicle or pallets and workers, therefore it is always placed high up and on the side and looking down. The minimum distance is 1 meter, and the average distance is 2 meters away from any human being.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 7Specifications Physical Characteristics: Length: 300 mm; Width: 300 mm; Height: 100 mm Weight: 3.5 Kg Edge Software: Multiple choices of edge servers with intelligent event engine, and with APIs ranging from high level HTTP to C# to low level C Operating System: Win CE Read Range: 13 meters with DogBone tags from Smartrac (FCC version) Protocol: ISO18000-6C, EPC UHF Class 1 Gen 2, Dense Reader Mode available (Class 3 Gen 2 compliant) Frequency Range: One of the following: 865-868 MHz, 865-867 MHz, 902-928 MHz, 922-928 MHz, 920-925 MHz, 915-922MHz Polarization: Circular Polarization Antenna, choice of LHCP or RHCP Signaling: LEDs and industrial grade buzzer for read acknowledgement and alert External Control: 4 x GPO and 4 x GPI Operating Temp: -20°C to 50°C (-4°F to 122°F) Storage Temp: -40°C to 85°C (-40°F to 185°F) Humidity: 95% Non-condensing Dust & Water: IP 68, works in outdoor environment Shock: MIL-STD-810F Method 516.5 Procedure V, 75g, 6ms, 2 shocks per axis Vibration: MIL-STD-810F Method 514.5 Category 24 Mechanical Impact Resistance: Free falling ball impacting test: 500 g weight of ball in 1 meter height Connectivity: 3G/GSM/GPRS, SMS, Ethernet, USB and Serial (RS232) Power Supply: DC supply (12 V, 5 A), or use POE+ (IEEE802.3at) Order Code: CS208-3G-NXHCP N=1: 865-868 MHz (Europe) & 865-867 MHz (India), N=2: 902-928 MHz (USA), N=4: 922-928 MHz (Taiwan), N=7: 920-925 MHz (China, Australia, Malaysia, Hong Kong etc.), N=8: 915-922 MHz (Japan) X=L : LHCP X=R : RHCP
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 83.1 Product Package 3.1.1 Basic Package Content Integrated reader 12V power adaptor Power cord
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 93.1.2 Optional Accessories Optional Accessories that customer has to select and buy Ethernet Cable Serial cable – Control Port Serial cable – Debug Port USB cable – Client Cable
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 10USB cable – Host Cable GPO Cable GPI Cable USB Cable – Dual Head
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 11Serial Cable Dual Head
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 123.1.3 Useful Components Customer Has to Source If the user’s or programmer’s computer does not have serial port but only has USB ports (many laptops are like that now), then the user has to buy for themselves the following convertor to connect to USB ports: USB to RS232 Convertor
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 134 Hardware Installation 4.1 Hardware Content of CS208-3G 4.1.1 CS208-3G Reader Overview The CSL CS208 is the first INTELLIGENT INTEGRATED Reader in the world with GPS, embedded edge server and a wide selection of connectivity, including 3G/GSM/GPRS, SMS, Ethernet, USB and Serial. Front panel of CS208. Rear panel of CS208
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 14 CS208 Side View ϭϮs'^D^/DĐĂƌĚ^ůŽƚƐΘ^ĐĂƌĚ^ůŽƚh^,ŽƐƚĂŶĚůŝĞŶƚWŽƌƚƐŽŶƚƌŽůĂŶĚĞďƵŐ^ĞƌŝĂůWŽƌƚƐƚŚĞƌŶĞƚ WŽƌƚ 'W/džϰ 'WKdžϰ/ŶƚĞƌŶĂů'^D&ƌŽŶƚŶƚĞŶŶĂ/ŶƐŝĚĞŽĨƚŚĞ&ƌŽŶƚWĂŶĞůƵnjnjĞƌ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 15 GSM SIM card and SD card Slots '^D^/DĐĂƌĚƐůŽƚƐ;DŝŶŝͬDŝĐƌŽͿ ^ĐĂƌĚƐůŽƚdžƚĞƌŶĂů'^DŶƚĞŶŶĂŽŶŶĞĐƚŽƌdžƚĞƌŶĂů'W^ ŶƚĞŶŶĂŽŶŶĞĐƚŽƌ/ŶƚĞƌŶĂů'W^ ŶƚĞŶŶĂ /ŶƚĞƌŶĂů'^D ĂĐŬŶƚĞŶŶĂ 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 164.2 Operating Setup 4.2.1 Installation 4.2.1.1 Install the SIM card - 1. Open the GSM SIM and SD card slot cover - 2. Insert the GSM SIM card into the GSM SIM card slot. The contact pins of GSM SIM card should be followed the below photo. - 3. Close the GSM SIM card/SD card slot Cover. '^D^/DĐĂƌĚ;DŝŶŝͲ^/DͿ'^D^/DĐĂƌĚ;DŝĐƌŽͲ^/DͿ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 174.2.1.2 Install SD card - 1. Open the GSM SIM and SD card slot cover. - 2. Insert the SD card into the SD card slot - 3. Close the cover of GSM SIM card/SD card Slots.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 184.2.1.3 Install Power Supply 4.2.1.4 Install Control Serial” and “Debug Serial” (Optional for “Debug Serial”)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 194.2.1.5 Install Ethernet 4.2.1.6 Install USB
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 205 Software Application 5.1 Software Content of Shipment Package The software of CS208 includes the following: 1. Demo Applications and default setting Demo to run CS208 reader: CS208BackendServer.exe CS208CommissioningAndFwUpgrade.exe Default setting file: default.ini (For user to define default setting of CS208-3G) 2. Bootloader CS208 Bootloader: u-boot_532M_v1.0.0.5_20140206.bin 3. Operating System WinCE 6.0: NK.nb0 4. User Manuals CSL CS208 User’s Manual 5.2 PC Side Prerequisites To run the CS208 application programs, the PC must have the following software installed: 1) Dot Net Framework 3.5 or above 2) Visual Studio 2008 3) PuTTY for test (Not included in software package. Free download from http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html) The software can be downloaded from Microsoft website or found on the CS208 software package inside folder “Software Development Environment on PC”.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 215.3 Default Setting CS208 is shipped out with default setting stored in the file factory.def. User can refer to factory.def in the software package to define the default setting of CS208 reader and reconfigure the reader. User is required to define the default setting file as default.ini and download the file to run CS208 the first time. User can download the defined default.ini file from PC to CS208 via USB or Ethernet download: USB download: 1. Power on CS208 and wait 2 minutes. 2. Connect CS208 USB client cable to PC and make sure PC installed active sync(for Window XP) or mobile center (for Window 7/8). 3. Open file exporter in PC and copy deault.ini into "CS208/Storage Card/CS208device" folder. 4. Power off CS208. 5. CS208 will use new configuration when user restart CS208. Network download: 1. Start demo program "CS208CommissioningAndFwUpgrade.exe" in "CS208-PC Demo\CS208FWUpgrade\bin\Release" folder. 2. Power on CS208 and wait 2 minutes. 3. Screen show "connected from xxxxxx" (xxxxx is CS208 Device ID) 4. Select "default.ini only" 5. Press "upgrade" button 6. Wait until success message box is displayed. 7. Power off CS208 8. CS208 will use new configuration when user restart CS208.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 225.3.1 Format of default.ini for initial setting of CS208 RFID reader [DEVICEID] Model = CS208 ; Model Name ID = SerialNumber ; Device ID (default set to CS208 Reader internal serial number if the ID = SerialNumber, you can change it other name) CommMode = NETWORK ; Communication mode (GPRS / NETWORK / USB / SMS / SERIAL) [NETWORK] DHCP = N ; Ethernet DHCP N/Y (N means Static IP) IP = 192.168.25.208 ; Ethernet IP Address, Static IP Subnet = 255.255.255.0 ; Ethernet Subnet Gateway = 192.168.25.1 ; Ethernet Gateway DNS1 = 192.168.25.1 ; First DNS DNS2 = 192.168.25.1 ; Second DNS [GSM] Antenna = 0 ; 0 = Auto select, 1 = Antenna Front Side; 2 = Antenna Back Side, 3 = External Antenna [GPRS] APN = CMNET ; GPRS APN (CMNET in China, CMHK in HK, rcomnet in India) (APN stands for Access Point Name, which is a property unique to a service provider) PHONENUMBER = *99# ; Dialup network phone number [SMS] PhoneNumber = ; Phone number of Backend control center AutoSwitchOverTime = 60 ; Time of switching to SMS when network connection fails (minute) AuthorizedSender1 = ; SMS authorized sender 1 AuthorizedSender2 = ; SMS authorized sender 2 AuthorizedSender3 = ; SMS authorized sender 3 AuthorizedUser1 = AuthorizedUser2 = AuthorizedUser3 = AuthorizedPassword1 = AuthorizedPassword2 = AuthorizedPassword3 = [SERVER] BackendServer = 1 ; Select Backend Server (1/2) ServerIP1 = 192.168.25.100 ; Backend Server IP 1 ServerIP2 = 192.168.25.108 ; Backend Server IP 2 Port = 9092 ; Backend Server Port number SynchronizationInterval = 60 ; Keepalive interval time (minute). Reader will send keep alive packet per this time in minute. [DATA] ReadTag = N ; Read Tag at power up or restart Access Password = 00000000 ; Tag Password TagAuthenticationMask = ; Authenticated TAG Mask (bit mask 1 = 1, 0 = 0, * = wildcard) MultiBank1 = NONE ; First additional data bank to be read (Multi bank reading) Offset1 = 0 ; First additional data Offset Count1 = 0 ; First additional data length (word) MultiBank2 = NONE ; Second additional data bank to be read (Multi bank reading)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 23Offset2 = 0 ; Second additional data Offset Count2 = 0 ; Second additional data length (word) TagScanningCycle = 1 ; Tag scanning cycle (minute), 0 = continuous read TagScanningTime = 10 ; Tag scanning time (second) TagDuplicateFilterTime = 10 ; Tag duplicate filter time (second) [DATETIME] NTP1 = time.nist.gov ; NTP Server IP (NTP stands for Network Time Protocol, it is the network location that gives you accurate current time NTP2 = stdtime.gov.hk ; NTP Server IP (backup) TIMEZONE = India Standard Time ; Time Zone [READER] Power = 300 ; RFID reader power (10 x value in dBm, 300 means 30 dBm) Country = IN ; Country Code ETSI / IN / G800 Channel = 1 ; Frequency Channel (1 - 50, 0 = hopping) (India only 3 channels, 1, 2 and 3) Profile = 2 ; Profile. Gen2 Profile ALGORITHM = DYNAMIC ; DYNAMIC Q / FIXED Q QVALUE = 3 ; Dynamic Start Q value / Fixed Q value [SIGNALS] Buzzer = 64 ; Volume 0 ~ 128 (0 = MUTE, 1 = min volume, 128 = max volume) [GPS] Antenna = 1 ; 1 = Internal Antenna, 2 = External Antenna [DATASTORAGE] Storage = 1 ; 0 = RAM(1 record) / 1 = SDCARD (max 2G data) DataResendTime = 5 ; Resend Tag data to backend server if reader does not receive data acknowledgement from PC server (minute)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 245.4 CS208 Burn-In Demo program startup procedure 5.4.1 Server (Far-end Computer) Setup 1. Manually input the TCP/IP properties to target PC / Server to connect CS208 with default setting. IP address: 192.168.25.100 Subnet Mask: 255.255.255.0 2. Run "CS208BackendServer.exe"
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 255.4.2 Client Setup - 1. Hardware: Ensure CS208 "Control Serial" port to PC “COM port” is connected. - 2. Run "putty.exe" program in PC with setting as follow:  Select “Serial”  Set the COM port number, for example “COM1”, that is connected to the “Control serial” port of CS208.  Input the Speed of “9600” for the above used COM port.  “Serial” to enter to the further setup page of the COM port. Ă͘ ^ĞůĞĐƚ͞^ĞƌŝĂů͟ď͘ /ŶƉƵƚƚŚĞKDEƵŵďĞƌĐ͘ /ŶƉƵƚƚŚĞ^ƉĞĞĚŽĨϵϲϬϬĚ͘ WƌĞƐƐ͞^ĞƌŝĂů͟ƚŽĞŶƚĞƌƚŽƚŚĞĨƵƌƚŚĞƌƐĞƚƵƉƉĂŐĞ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 26- 3. In the COM setup page, select “None” in field of the “Flow control”. And then press “Window” to enter to the “Window Setup Page”. - ^ĞůĞĐƚ͞EŽŶĞ͟ŝŶ͞&ůŽǁĐŽŶƚƌŽů͟ĨŝĞůĚŶĚƚŚĞŶƉƌĞƐƐ͞tŝŶĚŽǁ͟ƚŽĞŶƚĞƌƚŽ͞tŝŶĚŽǁƐĞƚƵƉƉĂŐĞ͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 27 - 4. In “Window” setup page, in order to clearly display the information from CS208, it is better to set the “Window” as below. - 5. Press “Open” button to run “PuTTY” ^Ğƚ͞ŽůƵŵŶƐ͟ƚŽϭϮϬ^Ğƚ͞ZŽǁƐ͟ƚŽϰϬ^Ğƚ͞>ŝŶĞƐŽĨƐĐƌŽůůďĂƌ͟ƚŽϭϬϬϬϬϬWƌĞƐƐ͞KƉĞŶ͟ďƵƚƚŽŶƚŽƌƵŶ͞WƵddz͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 28- 6. After run the “PuTTY”, the “PuTTY” screen is shown as
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 295.4.3 CS208 Normal Mode 5.4.3.1 CS208 Reader in Normal Mode 1. After setup “PuTTY” in 4.4.2. Client Setup, power up CS208. 2. The Power LED on the front panel will be lighted up as below - 3. After CS208 search the GSM network, “GSM” LED will flash slowly. ͞WŽǁĞƌKŶ͟>ǁŝůůďĞůŝŐŚƚĞĚƵƉĂĨƚĞƌƉŽǁĞƌƵƉ^ϮϬϴ͞'^D͟>ĨůĂƐŚĂĨƚĞƌ^ϮϬϴƐĞĂƌĐŚƚŚĞ'^DŶĞƚǁŽƌŬ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 304. When the announcement “Press ‘P’ to enter Production test or press ‘E’ to enter Engineering test” is displayed, user has 20 seconds to enter the “Production test” mode with pressing “P” or to enter the “Engineering test” mode with pressing “E”. At this moment, just WAIT until the reader count down from 20 to 0 and skip self test mode. 5. The reader enters Normal Mode and is then connected to server (Remote Computer)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 315.4.3.2 Server (Remote Computer) in Normal Mode When the reader enters normal operation mode after power up, ensure the CS208 Backend Server (Remote computer) is turned on and press “Start”. RFID Tag data will be displayed according to the setting of TagScanningInterval, TagScanningTime and TagDuplicateFilterTime in default.ini In default.ini: Tag Scanning Interval - Tag Scanning Interval is configured in term of minute (1 = 1 minute). If the value is zero, the reader will read data continuously. Tag Scanning Time - Time of scanning tag in each Tag Scanning Interval (1 = 1 second). After the Tag Scanning Time in each Tag Scanning Interval, the reader will stop reading tag. Tag Duplicate Filter Time - Time of checking duplicate tag in the same period. For the same tag is read in the same Tag Duplicate Filter Time, the tag data will only displayed once only. (1 = 1 second)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 325.4.4 CS208-3G Self-Test Mode - 1. After setting up “PuTTY” in Client Setup, power up CS208. Watch the printout on the PuTTY screen connected to the Control Serial Port. Make sure that window is the ACTIVE window on the screen. - - 2. The Power LED on the front panel will light up as below - - - 3. After CS208 search the GSM network, “GSM” LED will flash slowly. ͞WŽǁĞƌKŶ͟>ǁŝůůďĞůŝŐŚƚĞĚƵƉĂĨƚĞƌƉŽǁĞƌƵƉ^ϮϬϴ͞'^D͟>ĨůĂƐŚĂĨƚĞƌ^ϮϬϴƐĞĂƌĐŚƚŚĞ'^DŶĞƚǁŽƌŬ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 33- 4. At that point you will see a the announcement “Press ‘P’ to enter Production test or press ‘E’ to enter Engineering test” is displayed and the number in the bracket will decrement. The user has 20 seconds to enter the self test mode. At this moment, press ‘P’ or ‘E’ key (the PuTTY window must be the active window of the screen to receive the key press, of course) to enter production test mode or enter engineering test mode. - 5. The self test menu will then be shown on the “PuTTY” screen as below
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 345.4.5 CS208 Self Test Menu 5.4.5.1 Reset to Factory setting (SHIFT-0) 1. User can reset CS208 configuration file “default.ini” to initial setting (factory.def) using SHIFT-0 in Self Test Menu. 2. In the menu of Self Test Menu, choose “SHIFT-0: Reset to Factory setting ….” 3. CS208 undergoes factory reset and return message shown as below. 4. And then auto-return to Self Test Menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 355.4.5.2 Change GSM Antenna (SHIFT-1) 1. In the menu, check “SHIFT-1: Set to Next GSM Antenna”. The default value of “Antenna” is 1. 2. If you want to change antenna from 1 to 2, press “SHIFT” and “1” together. 3. The result is displayed when the test is finished. Current value of antenna is set to 2. 4. If you want to change antenna back from 2 to 3, press “SHIFT” and “1” together again. Note: 1 = Front GSM Antenna; 2 = Back GSM Antenna; 3 = External GSM Antenna
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 365.4.5.3 Set Test Server IP (SHIFT-2) 1. In the menu, check “SHIFT-2: Set Test Server IP …”. 2. The default “Test Server IP” is “192.168.25.100”. 3. If you want to change “Test Server IP”, press “SHIFT” and “2” together. 4. Input the new IP address of Test Server. (for example: 218.103.18.229) 5. Press “Enter” 6. The menu is displayed with the new IP address as shown below. 5.4.5.4 Change APN Name (SHIFT-3) 1. In the menu, check “SHIFT-3: Change APN Name …”. 2. The default APN Name is empty as below. 3. If you want to change APN Name, press “SHIFT” and “3” together. 4. Input the new APN Name (e.g. “CMHK”) 5. Press “Enter” New IP
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 37 6. The menu is displayed with the new APN name as shown below. 5.4.5.5 Set Test SMS Phone Number (SHIFT-4) 1. In the menu, check “SHIFT-4: Set Test SMS Phone Number…”. There is no default value for SMS Phone Number 2. If you want to change “SMS Phone Number”, press “SHIFT” and “4” together. 3. Input the new SMS Phone Number for test. 4. Press “Enter” 5. The menu is displayed with the new APN name as shown below. 5.4.5.6 Set Buzzer volume (SHIFT-5) 1. In the menu, check “SHIFT-5: Set Buzzer volume”. The default value of Buzzer volume New APN New SMS phone number
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 38is 64 2. If you want to set Buzzer volume, press “SHIFT” and “5” together. 3. Input the new Buzzer volume. (Example: 45) 4. The menu will be shown on the screen again. Current value of Buzzer volume is set to 45. 5.4.5.7 Set GPS Antenna (SHIFT-7) 1. In the menu, check “SHIFT-7: Set to Next GPS Antenna”. The default value of “Antenna” is 1. 2. If you want to change antenna from 1 to 2, press “SHIFT” and “7” together. 3. The result is displayed when the test is finished. Current value of antenna is set to 2. New Buzzer Volume
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 39 Note: 1 = Internal GPS Antenna; 2 = External GPS Antenna 5.4.5.8 Test Buzzer Tone (SHIFT-8) 1. In the menu, check “SHIFT-8: test Buzzer Tone”. The default value of Buzzer Tone is 0 (There are 3 tones output sequentially, one for Read Tag 1 alert, one for Read Tag 2 alert, and one for Write Tag alert when you press “2” to test Buzzer with Buzzer Tone value 0). 2. If you want to test Read Tag 1 only, you can change the value of Buzzer Tone to “1” with pressing “SHIFT” and “8” together. 3. If you want to test Read Tag 2 only, you can change the value of Buzzer Tone to “2” with pressing “SHIFT” and “8” together. 4. If you want to test Write Tag only, you can change the value of Buzzer Tone to “3” with pressing “SHIFT” and “8” together. 5.4.5.9 Burn-in Program (B) 1. Press “B” to start the burn-in program. After start the burn-in program the information come from CS208 is shown on the screen as below. New GPS Antenna
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 40 2. When Burn-in Program is entered, the next Test Item entered will be run continuously (“Running Cycle 1/2/3/4 …..” are seen) until the user press “any key” to exit as below. 5.4.5.10 Test LED (1) 1. In the menu, use “1” to test LED 2. The main menu is displayed again when the test is finished. 3. If the test is run with Burn-in Program, the result is displayed as above.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 415.4.5.11 Test Buzzer (2) 1. In the menu, use “2” to test Buzzer. Use “SHIFT-5” to set Buzzer Volume” and “SHIFT-8” to set Buzzer Tone before test Buzzer. 2. The main menu is displayed again when the test is finished. 3. If the test is run with Burn-in Program, the result is displayed as below. 5.4.5.12 Test RFID Reader (3) 1. In the menu, check “3” to test RFID Reader, with Dynamic Q, Dwell, Duration defined. (Example: Dynamic Q = 7, Dwell = 2s, Duration = 10s) 2. The Tag info is displayed continuously when RFID tag is checked.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 42 3. After the time of duration defined (10 seconds), the test finished and the program return to menu 5.4.5.13 Test SMS (4) 1. In the menu, choose “4: Test SMS”, the reader can send SMS to Phone with number set in “SHIFT-4”, valid SIM card inserted with mobile service enabled in the reader. 2. Press “4” to test SMS. 3. The program returns to main menu when the test is finished. 4. The Mobile phone with No.12345678 will receive the message: “CS208 Send SMS Test”. 5.4.5.14 Check internet connection with server (5) 1. In the menu, use “SHIFT-2” to set target Test Server IP (for example: 218.103.18.229) and use “SHIFT-3” to set APN (for example: CMHK).
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 432. When the menu is shown again, check “5: Check internet connection with server …..” and press “5” 3. The result is displayed as below. 4. The program automatically returns to the test menu. 5.4.5.15 Ping local area network server (6) 1. In the menu, use “SHIFT-2” to set target Test Server IP (Example: 192.168.25.100) 2. When the menu is shown again, choose “6: Ping local area network server ...” 3. The result is displayed as below.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 44 4. The program automatically returns to the test menu. 5.4.5.16 Read GSM RSSI and Registration Status (7) 1. In the menu, if you want to check GSM RSSI and registration status, choose “7”. 2. The result is displayed (CSQ: GSM RSSI, CREG: GSM Registration) as below.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 45 3. The program automatically returns to the test menu. 5.4.5.17 Get GPIO status (8) 1. In the menu, if you want to get GPIO status, choose “8: Get GPIO Status”. 2. The returned message is displayed with status of GPI pins. GPO pins will toggle in a HIGH-to-LOW transition 3 times. 5.4.5.18 SD Card Test (9) 1. In the menu, if you want to run SD Card Test, check “9: SD Card 2 Test (External SD Card)”. 2. Press “9” to run the Write Test, Read Test, and Delete File Test in sequence. 3. The result is displayed when the test is finished.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 464. The program automatically returns to the test menu. 5.4.5.19 GPS Test (0) 1. In the menu, use “SHIFT-7” to set GPS Antenna used (Internal antenna or External Antenna). 2. Press “0” to run the GPS Test. 3. The result is displayed as below. 4. Press “any key” to stop the test and then turn to test menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 475.4.5.20 Write Tag Test (S) 1. Before run the “Write Tag Test”, you must know the EPC code of the Tag you want to Write. (for example: AD94250042D0A99850000007). 2. Press “S” to run the “Write Tag Test”. 3. Enter the EPC code of the Tag you want to write. 4. Enter the new EPC code you want to change (for example AD94250042D0A99850000018). 5. The test result is displayed as below. 6. After finish the test, the program automatically return to the menu again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 485.4.5.21 Kill Tag Test (T) 1. Before run the “Kill Tag Test”, you must know the EPC code of the Tag you want to kill. (for example: AD94250042D0A99850000018). 2. Press “T” to run the “Kill Tag Test”. (Note: after kill a tag, the tag will be destroyed permanently!!!). 3. Enter the EPC code of the Tag you want to kill. 4. The test result is displayed as below. 5. After finish the test, the program automatically return to the menu again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 495.4.5.22 Run Main Program (Normal mode) (N) Choose “N: Run Main Program (Normal mode)” will turn CS208 to return to normal operation mode from self test menu.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 505.4.6 Debug Port Setup (Optional) In order to monitor the status of CS208, it is better to use the “Debug Serial” port of CS208 and “PuTTY” in PC side. The “PuTTY” Setup as follow: 1. Connect "Debug Serial" port to PC “COM port”. This “COM port” should be different from “Control Serial” port. 2. Run "putty.exe" PC program. 3. Select “Serial”. 4. Input the COM port number, for example “COM4”, that is connected to the “Debug Serial” port of CS208. 5. Input the Speed of “115200” for the above used COM port. 6. Press “Serial” to enter to the further setup page of the COM port. ď͘ ^ĞůĞĐƚ͞^ĞƌŝĂů͟Đ͘ /ŶƉƵƚƚŚĞKDEƵŵďĞƌĚ͘ /ŶƉƵƚƚŚĞ^ƉĞĞĚŽĨϭϭϱϮϬϬĞ͘ WƌĞƐƐ͞^ĞƌŝĂů͟ƚŽĞŶƚĞƌƚŽƚŚĞĨƵƌƚŚĞƌƐĞƚƵƉƉĂŐĞ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 517. In the COM setup page, select “None” in field of the “Flow control”. And then press “Window” to enter to the “Window Setup Page”. 8. In “Window” setup page, in order to clearly display the information from CS208, it is better to set the “Window” as below ^ĞůĞĐƚ͞EŽŶĞ͟ŝŶ͞&ůŽǁĐŽŶƚƌŽů͟ĨŝĞůĚŶĚƚŚĞŶƉƌĞƐƐ͞tŝŶĚŽǁ͟ƚŽĞŶƚĞƌƚŽ͞tŝŶĚŽǁƐĞƚƵƉƉĂŐĞ͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 52 9. After setup, Press “Open” button 10. After power up CS208, the running status of CS208 is shown on the screen as below ^Ğƚ͞ŽůƵŵŶƐ͟ƚŽϭϮϬ^Ğƚ͞ZŽǁƐ͟ƚŽϰϬ^Ğƚ͞>ŝŶĞƐŽĨƐĐƌŽůůďĂƌ͟ƚŽϭϬϬϬϬϬ
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 535.5 CS208 Configuration 5.5.1 Initial Setup 1. When CS208 is used in the first time, it is set to factory default setting and sends data to PC/Server via Ethernet in default static IP address 192.168.25.100. Therefore, user has to set PC for CS208 configuration as 192.168.25.100 at the beginning. 2. Connect CS208 to PC via Ethernet. Power up CS208. 3. Place some tags near CS208 for test.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 544. Open PC Software “CS208BackendServer.exe” in the PC for CS208 configuration. Wait until the CS208 reader appears and tag data is received.5. If CS208 reader does not appear and no tag data is received, please refer to CSL CS208 User's Manual and reconfigure CS208 Default Setting File (default.ini) by connecting CS208 reader via USB connection. 6. Choose and press button “READER CONFIG” from PC Software. 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 557. Input the default.ini location, where the destination the Default Setting file (default.ini) will be copied to. After that choose and press “Get default.ini from Reader”. 8. The Default Setting file (default.ini) is copied from CS208 to the target directory.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 565.5.2 Set modes to send data via GPRS and Ethernet Please backup default.ini before doing any modification on mode setting (GPRS / LAN) to send data. User may use the copy to recover CS208 for wrong setting of the default.ini file. 5.5.2.1 CS208 sends data via Ethernet 1. In default.ini, find the section [DEVICEID], set communication mode by setting CommMode: NETWORK. 2. In the [SERVER] section, set static IP for target PC to be used. Normally ServerIP1 is used for setting static IP for target PC. Therefore BackendServer is set to 1.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 57ServerIP1: Set the IP address where the PC (in static IP) receive the data Port: Default is 9092 for Demo App SynchronizationInterval: Reader will send keep alive packet per this time in minute (To the PC as server) 3. In the section [NETWORK], set DHCP, IP, Subnet, Gateway and DNS for CS208 reader Please ensure that the CS208 reader and the target PC are configured in the same subnet address. For example, if the ServerIP1 (target PC IP Address) is set to 192.168.12.163, the network setting can be set as follow: IP = 192.168.12.208 Subnet = 255.255.255.0 Gateway = 192.168.12.1 DNS = 192.168.12.1 4. Save and Close default.ini 5. Copy the updated default.ini file from the directory back to CS208 using READER CONFIG again. Please note the default.ini location should remain unchanged. Choose and press “Send default.ini to Reader”.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 586. When the default.ini is copied to CS208 reader, a success message will be displayed. Press OK and quit Reader Config. 7. Reboot CS208 after default.ini file is changed 8. Check the IP address setting in target PC / Server
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 599. Open PC Software “CS208BackendServer.exe” in the target PC. Wait until the CS208 reader appears and tag data is received.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 605.5.2.2 CS208 sends data via GPRS 1. Before configure CS208 sends data in GPRS mode, please ensure that that SIM card is inserted to CS208 and the GPRS data service is enabled. 2. Please consult with Internet Service Provider or MIS in the company for the External IP address. Also Port Forwarding configuration is required so that the data will be map to PC with internal IP address. Below is an example: External IP address (from Internet Service Provider): 218.103.18.229 port: 9092 map to Internal IP address (target PC / Server): 192.168.25.141 (FIXED IP) DNS1: 8.8.8.8 (Google Public DNS) DNS2: 8.8.4.4 (Google Public DNS) 3. In default.ini, find the section [DEVICEID], set communication mode by setting CommMode: GPRS.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 614. In the section [GPRS], set APN according to the country / region where CS208 is used 5. In the [SERVER] section, set static IP for target PC to be used. Normally ServerIP2 is used for setting Internet IP address target PC / Server is connected. Therefore BackendServer is set to 2. ServerIP1 can be ignored when ServerIP2 is used. Please note that if user set invalid IP address in ServerIP2, CS208 will change to make connection with PC with IP address set as ServerIP1 and send data. ServerIP2: Set the Internet IP address provided by the Internet Service Provider in CS208 test site. Port: Default is 9092 for Demo App SynchronizationInterval: Reader will send keep alive packet per this time in minute (To the PC as server)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 626. Save and Close default.ini 7. Copy the updated default.ini file from the directory back to CS208 using READER CONFIG again. Please note the default.ini location should remain unchanged. Choose and press “Send default.ini to Reader”. 8. When the default.ini is copied to CS208 reader, a success message will be displayed. Press OK and quit Reader Config. 9. Reboot CS208 after default.ini file is changed.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 63 10. Manually input the TCP/IP properties to target PC / Server: IP address: 192.168.25.141 Subnet Mask: 255.255.255.0 Gateway: 192.168.25.2 DNS1: 8.8.8.8 DNS2: 8.8.4.4 11. Open PC Software “CS208BackendServer.exe” in the target PC. Wait until the CS208 reader appears and tag data is received.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 645.6 CS208 Firmware Upgrade 5.6.1 Firmware Upgrade Overview User can have an overview of the files required for the firmware upgrade of the CS208 and the upgrade procedure in sequence. The CSL CS208 Firmware Upgrade procedure is important for users for their CS208 RFID Reader upgrade. Incorrect firmware upgrade procedure may lead to system halt and may not be unrecoverable. 5.6.1.1 CS208 Firmware Upgrade Flow Diagram The flow diagram below shows the priority of firmware upgrade steps starting from device application, operating system and bootloader. User MUST follow the sequence for multiple firmware upgrades. Firmware Upgrade for CS208 Device Application 1. CS208 power up and in connection with PC via Ethernet 2. Open upgrade firmware in PC (Use PC upgrade software 1.0.6 for CS208Device1.0.16 after) 3. Choose the latest device firmware and upgrade 4. When the upgrade process is finished, reboot the reader automatically 5. Keep the PC upgrade software ON and WAIT until CS208 is reconnected Firmware Upgrade for CS208 Operating System 1. CS208 power up and in connection with PC via Ethernet 2. Open upgrade firmware in PC (version 1.0.6) 3. Choose the latest OS firmware and upgrade 4. When the upgrade process is finished, the reader reboots automatically 5. Keep the PC upgrade software ON and WAIT until CS208 is reconnected Firmware Upgrade for CS208 Bootloader 1. CS208 power up and in connection with PC via Ethernet 2. Open upgrade firmware in PC (version 1.0.5) 3. Choose the latest bootloader firmware and upgrade 4. When the upgrade process is finished, the reader reboots automatically 5. Keep the PC upgrade software ON and WAIT until CS208 is reconnected Firmware Upgrade finish
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 655.6.2 Firmware Upgrade Procedure Below is the firmware list of CS208 RFID reader: Firmware File Name Device Application CS208DeviceXX.XX.XX.zip (e.g. CS208 Device 2.0.1-DB.zip) Operating System CS208_wince_fa_XXXXXXXX_XXXX_532mhz_nk.nb0 (CS208_wince_fa_20140407_1642_532mhz_nk) Bootloader u-boot_532M_vX.X.X.X_XXXXXXXX.bin (u-boot_532M_v1.0.0.5_20140206.bin) Below is the PC software list for firmware upgrade of CS208 RFID reader: CS208 Upgrade PC Software File Name Device Application: version after 1.0.16 CS208CommissioningAndFwUpgrade1.0.6.exe Operating System: All version CS208CommissioningAndFwUpgrade1.0.6.exe Bootloader: All version CS208CommissioningAndFwUpgrade1.0.6.exe
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 665.6.2.1 PC IP Configuration before CS208 firmware upgrade Before firmware upgrade, user should check the IP configuration and firewall setting in PC. 1. Go to Local Area Connection Properties. Find Internet Protocol Version 4 (TCP/IPv4) and choose Properties. 2. Choose “Use the following IP address”. Set IP address (192.168.25.100), Subnet mask (255.255.255.0), Default gateway (192.168.25.1 for direct connect to CS208 reader). Click OK after set.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 673. Ensure the Windows Firewall is turned off. 4. Open Command Prompt and do ping test (“Ping 192.168.25.208” <– default CS208 IP address). Reply message will received for successful network connection.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 685.6.2.2 CS208 Device Application firmware upgrade via Ethernet 5. After CS208 RFID reader is power up, wait 1 minute. 6. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 7. “CS208CommissioningAndFwUpgrade1.0.6” is used for Device Application upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.6) provided in the CS208 software package. Wait until CS208 Serial ID is displayed. (Around 30 seconds) 8. Choose “Upgrade Application and Keep old default.ini file” in the drop down list.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 69 9. Click “…” to choose the latest Device Firmware for upgrade (CS208 Device 2.0.1-DB.zip). 10. Click “Upgrade” button to start upgrade
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 7011. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 12. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 715.6.2.3 CS208 Operating System firmware upgrade via Ethernet 4. After CS208 RFID reader is power up, wait 1 minute. 5. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 6. “CS208CommissioningAndFwUpgrade1.0.6” is used for OS firmware upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.6) provided in the CS208 software package. Wait until CS208 Serial ID is displayed. (Around 30 seconds)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 727. Choose “Upgrade OS kernel” in the drop down list. 8. Choose the latest OS Firmware for upgrade (example: CS208_wince_fa_20140407_1642_532mhz_nk.nb0) 9. Click “Upgrade” button to start upgrade.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 7310. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 11. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 745.6.2.4 CS208 Bootloader firmware upgrade via Ethernet 1. After CS208 RFID reader is power up, wait 1 minute. 2. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208 IP address). Check the network connection of CS208 reader. 3. “CS208CommissioningAndFwUpgrade1.0.6” is used for OS firmware upgrade. Run CS208CommissioningAndFwUpgrade.exe (version 1.0.6) provided in the CS208 software package. Wait until CS208 Serial ID is displayed (Around 30 seconds).
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 754. Choose “Upgrade Bootloader” in the drop down list. 5. Choose the latest Bootloader Firmware for upgrade (example: u-boot_532M_v1.0.0.5_20140206.bin) 6. Click “Upgrade” button to start upgrade
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 767. Wait until progress bar status reach 100%, a download complete message box is displayed when the upgrade process is finished. 8. CS208 RFID Reader reboot automatically after firmware upgrade. Keep the PC upgrade software ON and WAIT until the CS208 reconnected again.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 775.6.3 Firmware Upgrade via USB connection 5.6.3.1 Firmware Upgrade via USB connection (Window 7) ϭ͘ ^ŝŶĐĞ^ϮϬϴĐĂŶŶŽƚĚŽĨŝƌŵǁĂƌĞƵƉŐƌĂĚĞŝŶEŽƌŵĂůŵŽĚĞ͘ZĞƐƚĂƌƚ^ϮϬϴĂŶĚĐŚĞĐŬ^ϮϬϴĞŶƚĞƌƐ^ĞůĨdĞƐƚDŽĚĞ͘Ϯ͘ /ŶƚŚĞŵĞŶƵŽĨ^ĞůĨdĞƐƚDŽĚĞ͕ĐŚŽŽƐĞ͞Y͗džŝƚWƌŽŐƌĂŵ͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 78ϯ͘ /ĨƵƐĞƌŝƐƵƐŝŶŐtŝŶĚŽǁϳ͕ĐŚĞĐŬtŝŶĚŽǁƐDŽďŝůĞĞǀŝĐĞĞŶƚƌĞŝƐŽƉĞŶĞĚ͘ ϰ͘ ŽŶŶĞĐƚ^ϮϬϴƚŽWǀŝĂh^ĂŶĚǁĂŝƚƵŶƚŝů͞ĐŽŶŶĞĐƚĞĚ͟ƐƚĂƚƵƐŝƐĚŝƐƉůĂLJĞĚ͘ϱ͘ /ŶtŝŶĚŽǁƐDŽďŝůĞĞǀŝĐĞĞŶƚƌĞ͕ĐŚŽŽƐĞ͞ŽŶŶĞĐƚǁŝƚŚŽƵƚƐĞƚƚŝŶŐƵƉLJŽƵƌĚĞǀŝĐĞ͘͟dŚĞŶĐŚŽŽƐĞ͞&ŝůĞDĂŶĂŐĞŵĞŶƚ͟ ͞ƌŽǁƐĞƚŚĞĐŽŶƚĞŶƚƐŽĨLJŽƵƌĚĞǀŝĐĞ͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 79ϲ͘  ŶĞǁ ĚƌŝǀĞ ͞^ϮϬϴ͟ ŝƐ ĨŽƵŶĚ͘ ŚŽŽƐĞ ͞^ƚŽƌĂŐĞĂƌĚ͟ ǁŚĞƌĞ ƚŚĞ ^ϮϬϴ ĂƉƉůŝĐĂƚŝŽŶĂŶĚĚĞĨĂƵůƚƐĞƚƚŝŶŐĨŝůĞƐĂƌĞƐƚŽƌĞĚĂŶĚĐĂŶďĞƵƉŐƌĂĚĞĚ͘ϳ͘ /Ŷ ƚŚĞ ĚŝƌĞĐƚŽƌLJ ͞͞Ͱ^ϮϬϴͰ^ƚŽƌĂŐĞ ĂƌĚ͕͟ ĐŚĞĐŬ ͞ͰĐƐϮϬϴĞǀŝĐĞ͘͟ ,ĞƌĞ ƚŚĞ ƵƐĞƌ ĐĂŶƵƉŐƌĂĚĞ ƚŚĞ ĨŝůĞƐ ^ϮϬϴĞǀŝĐĞ͘ĞdžĞ͕ ^>ŝďƌĂƌLJ͘Ěůů͕ ĚĞĨĂƵůƚ͘ŝŶŝ͕ ĞƚĐ ĚŝƌĞĐƚůLJ ďLJ KWz ĂŶĚZW>ǁŝƚŚŶĞǁǀĞƌƐŝŽŶĨŝůĞƐ͘ ϴ͘ hŶƉůƵŐh^ĐĂďůĞĂŶĚƌĞƚ^ϮϬϴŵĂŶƵĂůůLJ͘
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 805.6.3.2 Firmware Upgrade via USB connection (Window XP) ϭ͘ ^ŝŶĐĞ^ϮϬϴĐĂŶŶŽƚĚŽĨŝƌŵǁĂƌĞƵƉŐƌĂĚĞŝŶEŽƌŵĂůŵŽĚĞ͘ZĞƐƚĂƌƚ^ϮϬϴĂŶĚĐŚĞĐŬ^ϮϬϴĞŶƚĞƌƐ^ĞůĨdĞƐƚDŽĚĞ͘Ϯ͘ /ŶƚŚĞŵĞŶƵŽĨ^ĞůĨdĞƐƚDŽĚĞ͕ĐŚŽŽƐĞ͞Y͗džŝƚWƌŽŐƌĂŵ͘͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 81ϯ͘ /ĨƵƐĞƌŝƐƵƐŝŶŐtŝŶĚŽǁyW͕ĐŚĞĐŬDŝĐƌŽƐŽĨƚĐƚŝǀĞ^LJŶĐŝƐŽƉĞŶĞĚ͘ŽŶŶĞĐƚ^ϮϬϴƚŽWǀŝĂh^͘ϰ͘ tŚĞŶ ^ϮϬϴ ŝƐ ĐŽŶŶĞĐƚĞĚ ƚŚĞ ĨŝƌƐƚ ƚŝŵĞ͕ DŝĐƌŽƐŽĨƚ ĐƚŝǀĞ ^LJŶĐ ŵĂLJ ĂƐŬ ĨŽƌ ƐĞƚ ƵƉ ĂƉĂƌƚŶĞƌƐŚŝƉ͘ŚŽŽƐĞ͞EŽ͟ĂŶĚƉƌĞƐƐ͞EĞdžƚ͘͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 82ϱ͘ ŚĞĐŬ ^ϮϬϴ ŝƐ ĂƵƚŽŵĂƚŝĐĂůůLJ ĐŽŶŶĞĐƚĞĚ ƐŚŽǁŶ ĂƐ ďĞůŽǁ͘ hƐĞƌ ĐĂŶ ĂůƐŽ ĐŚĞĐŬ ƚŚĞĐŽŶŶĞĐƚŝŽŶƐĞƚƚŝŶŐƐĨŽƌ^ϮϬϴĐŽŶŶĞĐƚŝŶŐƚŽĐƚŝǀĞ^LJŶĐĂƵƚŽŵĂƚŝĐĂůůLJ͘ ϲ͘ ŚŽŽƐĞ͞DŽďŝůĞĞǀŝĐĞ͟ŝŶ͞DLJŽŵƉƵƚĞƌ͘͟
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 83ϳ͘ /Ŷ͞DŽďŝůĞĞǀŝĐĞ͕͟ĐŚŽŽƐĞ͞^ƚŽƌĂŐĞĂƌĚ͟ ǁŚĞƌĞƚŚĞ^ϮϬϴĂƉƉůŝĐĂƚŝŽŶĂŶĚĚĞĨĂƵůƚƐĞƚƚŝŶŐĨŝůĞƐĂƌĞƐƚŽƌĞĚĂŶĚĐĂŶďĞƵƉŐƌĂĚĞĚ͘ ϴ͘ ŚĞĐŬ ƚŚĞ ĚŝƌĞĐƚŽƌLJ ͞Ͱ^ƚŽƌĂŐĞ ĂƌĚͰĐƐϮϬϴĞǀŝĐĞ͘͟ ,ĞƌĞ ƚŚĞ ƵƐĞƌ ĐĂŶ ƵƉŐƌĂĚĞ ƚŚĞ ĨŝůĞƐ^ϮϬϴĞǀŝĐĞ͘ĞdžĞ͕ ^>ŝďƌĂƌLJ͘Ěůů͕ ĚĞĨĂƵůƚ͘ŝŶŝ͕ ĞƚĐ ĚŝƌĞĐƚůLJ ďLJ KWz ĂŶĚ ZW> ǁŝƚŚ ŶĞǁ ǀĞƌƐŝŽŶĨŝůĞƐ͘ ϵ͘ hŶƉůƵŐh^ĐĂďůĞĂŶĚƌĞƚ^ϮϬϴŵĂŶƵĂůůLJ͘
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 845.6.4 Reset CS208 to Factory Setting Please refer to 4.4.5.1 RESET TO FACTORY SETTING (SHIFT-0) to reset CS208 to factory setting.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 856 Remote access CS208 via Ethernet and USB using Remote Desktop User can remote access the CS208 Integrated RFID Reader via Ethernet or USB interface using Remote Desktop. 6.1 Remote access CS208 via Ethernet 1. Run the Remote Desktop Tool “cerhost.exe”. 2. In the form “Remote Display Control for Window CE”, Choose “File > Connect…”.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 863. Wait several seconds until the active target device is displayed in the list. If no device is found in the list, please check the power of the reader and the Ethernet connection between the reader and the PC. Check the IP address of the target reader. 10. Choose the target reader in the list and press “OK” to confirm. 11. The Window CE Desktop of CS208 reader is ready for use.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 876.2 Remote access Application via USB 1. Run the Remote Desktop Tool “cerhost_as.exe”. 2. The form “Active Sync Remote Display Control for CS208” is displayed, wait several seconds.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 883. The Window CE Desktop of CS208 reader is ready for use.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 897 Software Tools for CS208 setup 7.1 Wireshark - network protocol analyzer Wireshark is a network protocol analyzer which can help to capture the IP packet exchanges between the user PC and the RFID reader. User can download Wireshark from http://www.wireshark.org/download.html. It is a freeware. Below is the procedure for setting up the diagnosis of IP packet exchanges of the RFID reader: 4. Turn off PC Firewall 5. Turn on Wireshark capture
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 906. Choose Capture > Options in the menu bar 7. In Options, set the Capture File destination with filename (*.pcapng). The captured data will be written to the file created. 8. Press “Start” button in Options. Wireshark starts capture data of IP packet exchanges.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 919. Power on RFID Reader. Check the IP of reader is set and recorded before use. 10. Turn on demo app software for CS208 RFID reader (CS208BackendServer.exe). 11. In Wireshark, set “ip.addr == 192.xxx.xxx.xxx (CS208 device IP address)” in the Filter box, the IP packet exchanges data record of RFID reader and PC is seen. Column “Source” shows the IP address of RFID reader (IP address = 192.168.25.209 in the example below) and PC (IP address = 192.168.25.147 in the example below).
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 9212. User can press “Stop” icon to stop data capture when necessary. 13. User can find the saved capture file (*.pcapng) in the directory user defined in Step 4.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 937.2 Port Forwarding (To be defined)
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 948 Regulatory Information 8.1 Federal Communications Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 1m between the radiator & your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This product must be installed by a professional technician/installer. FCC Radiation Exposure Statement: To comply with FCC RF exposure compliance requirements, the antennas used for this transmitter must be installed to provide a separation distance of at least 1m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 98Appendix A. CS208 GPIO Simple Test Circuit
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 99
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 100Appendix B. SMS ERROR code list 8QDVVLJQHGXQDOORFDWHGQXPEHU 7KLVFDXVHLQGLFDWHVWKDWWKHGHVWLQDWLRQUHTXHVWHGE\WKH0RELOH6WDWLRQFDQQRWEHUHDFKHGEHFDXVHDOWKRXJKWKHQXPEHULVLQDYDOLGIRUPDWLWLVQRWFXUUHQWO\DVVLJQHGDOORFDWHG 2SHUDWRUGHWHUPLQHGEDUULQJ 7KLVFDXVHLQGLFDWHVWKDWWKH06KDVWULHGWRVHQGDPRELOHRULJLQDWLQJVKRUWPHVVDJHZKHQWKH06VQHWZRUNRSHUDWRURUVHUYLFHSURYLGHUKDVIRUELGGHQVXFKWUDQVDFWLRQV &DOOEDUUHG 7KLV FDXVH LQGLFDWHV WKDW WKH RXWJRLQJ FDOO EDUUHG VHUYLFH DSSOLHV WR WKH VKRUW PHVVDJHVHUYLFHIRUWKHFDOOHGGHVWLQDWLRQ 6KRUWPHVVDJHWUDQVIHUUHMHFWHG 7KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHGRHVQRWZLVKWRDFFHSWWKLVVKRUWPHVVDJHDOWKRXJKLWFRXOGKDYHDFFHSWHGWKHVKRUWPHVVDJHVLQFHWKHHTXLSPHQWVHQGLQJWKLVFDXVHLVQHLWKHUEXV\QRULQFRPSDWLEOH 'HVWLQDWLRQRXWRIVHUYLFH 7KLVFDXVHLQGLFDWHVWKDWWKHGHVWLQDWLRQLQGLFDWHGE\WKH0RELOH6WDWLRQFDQQRWEHUHDFKHGEHFDXVH WKH LQWHUIDFH WR WKH GHVWLQDWLRQ LV QRW IXQFWLRQLQJ FRUUHFWO\ 7KH WHUP QRWIXQFWLRQLQJFRUUHFWO\LQGLFDWHVWKDWDVLJQDOOLQJPHVVDJHZDVXQDEOHWREHGHOLYHUHGWRWKHUHPRWHXVHUHJDSK\VLFDOOD\HURUGDWDOLQNOD\HUIDLOXUHDWWKHUHPRWHXVHUXVHUHTXLSPHQWRIIOLQHHWF 8QLGHQWLILHGVXEVFULEHU 7KLVFDXVHLQGLFDWHVWKDWWKHVXEVFULEHULVQRWUHJLVWHUHGLQWKH3/01LH,06,QRWNQRZQ )DFLOLW\UHMHFWHG 7KLVFDXVHLQGLFDWHVWKDWWKHIDFLOLW\UHTXHVWHGE\WKH0RELOH6WDWLRQLVQRWVXSSRUWHGE\WKH3/01 8QNQRZQVXEVFULEHU 7KLVFDXVHLQGLFDWHVWKDWWKHVXEVFULEHULVQRWUHJLVWHUHGLQWKH+/5LH,06,RUGLUHFWRU\QXPEHULVQRWDOORFDWHGWRDVXEVFULEHU 1HWZRUNRXWRIRUGHU 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 1017KLVFDXVHLQGLFDWHVWKDWWKHQHWZRUNLVQRWIXQFWLRQLQJFRUUHFWO\DQGWKDWWKHFRQGLWLRQLVOLNHO\ WR ODVW D UHODWLYHO\ ORQJ SHULRG RI WLPH HJ LPPHGLDWHO\ UHDWWHPSWLQJ WKH VKRUWPHVVDJHWUDQVIHULVQRWOLNHO\WREHVXFFHVVIXO 7HPSRUDU\IDLOXUH 7KLVFDXVHLQGLFDWHVWKDWWKHQHWZRUNLVQRWIXQFWLRQLQJFRUUHFWO\DQGWKDWWKHFRQGLWLRQLVQRWOLNHO\WRODVWDORQJSHULRGRIWLPHHJWKH0RELOH6WDWLRQPD\ZLVKWRWU\DQRWKHUVKRUWPHVVDJHWUDQVIHUDWWHPSWDOPRVWLPPHGLDWHO\ &RQJHVWLRQ 7KLVFDXVHLQGLFDWHVWKDWWKHVKRUWPHVVDJHVHUYLFHFDQQRWEHVHUYLFHGEHFDXVHRIKLJKWUDIILF 5HVRXUFHVXQDYDLODEOHXQVSHFLILHG 7KLVFDXVHLVXVHGWRUHSRUWDUHVRXUFHXQDYDLODEOHHYHQWRQO\ZKHQQRRWKHUFDXVHDSSOLHV 5HTXHVWHGIDFLOLW\QRWVXEVFULEHG 7KLVFDXVHLQGLFDWHVWKDWWKHUHTXHVWHGVKRUWPHVVDJHVHUYLFHFRXOGQRWEHSURYLGHGE\WKHQHWZRUN EHFDXVH WKH XVHU KDV QRW FRPSOHWHG WKH QHFHVVDU\ DGPLQLVWUDWLYH DUUDQJHPHQWVZLWKLWVVXSSRUWLQJQHWZRUNV 5HTXHVWHGIDFLOLW\QRWLPSOHPHQWHG 7KLV FDXVH LQGLFDWHV WKDW WKH QHWZRUN LV XQDEOH WR SURYLGH WKH UHTXHVWHG VKRUW PHVVDJHVHUYLFH ,QYDOLGVKRUWPHVVDJHWUDQVIHUUHIHUHQFHYDOXH 7KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHKDVUHFHLYHGDPHVVDJHZLWKDVKRUWPHVVDJHUHIHUHQFHZKLFKLVQRWFXUUHQWO\LQXVHRQWKH06QHWZRUNLQWHUIDFH ,QYDOLGPHVVDJHXQVSHFLILHG 7KLVFDXVHLVXVHGWRUHSRUWDQLQYDOLGPHVVDJHHYHQWRQO\ZKHQQRRWKHUFDXVHLQWKHLQYDOLGPHVVDJHFODVVDSSOLHV ,QYDOLGPDQGDWRU\LQIRUPDWLRQ 7KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHKDVUHFHLYHGDPHVVDJHZKHUHDPDQGDWRU\ LQIRUPDWLRQHOHPHQWLVPLVVLQJDQGRU KDVDFRQWHQWHUURUWKHWZRFDVHVDUHLQGLVWLQJXLVKDEOH 0HVVDJHW\SHQRQH[LVWHQWRUQRWLPSOHPHQWHG 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 1027KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHKDVUHFHLYHGDPHVVDJHZLWKDPHVVDJHW\SHLWGRHVQRWUHFRJQL]HHLWKHUEHFDXVHWKLVLVDPHVVDJHQRWGHILQHGRUGHILQHGEXWQRWLPSOHPHQWHGE\WKHHTXLSPHQWVHQGLQJWKLVFDXVH 0HVVDJHQRWFRPSDWLEOHZLWKVKRUWPHVVDJHSURWRFROVWDWH 7KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHKDVUHFHLYHGDPHVVDJHVXFKWKDWWKHSURFHGXUHVGRQRWLQGLFDWHWKDWWKLVLVDSHUPLVVLEOHPHVVDJHWRUHFHLYHZKLOHLQWKHVKRUWPHVVDJHWUDQVIHUVWDWH ,QIRUPDWLRQHOHPHQWQRQH[LVWHQWRUQRWLPSOHPHQWHG 7KLVFDXVHLQGLFDWHVWKDWWKHHTXLSPHQWVHQGLQJWKLVFDXVHKDVUHFHLYHGDPHVVDJHZKLFKLQFOXGHVLQIRUPDWLRQHOHPHQWVQRWUHFRJQL]HGEHFDXVHWKHLQIRUPDWLRQHOHPHQWLGHQWLILHULVQRW GHILQHG RU LW LV GHILQHG EXW QRW LPSOHPHQWHG E\ WKH HTXLSPHQW VHQGLQJ WKH FDXVH+RZHYHUWKHLQIRUPDWLRQHOHPHQWLVQRWUHTXLUHGWREHSUHVHQWLQWKHPHVVDJHLQRUGHUIRUWKHHTXLSPHQWVHQGLQJWKHFDXVHWRSURFHVVWKHPHVVDJH 3URWRFROHUURUXQVSHFLILHG 7KLVFDXVHLVXVHGWRUHSRUWDSURWRFROHUURUHYHQWRQO\ZKHQQRRWKHUFDXVHDSSOLHV ,QWHUZRUNLQJXQVSHFLILHG 7KLVFDXVHLQGLFDWHVWKDWWKHUHKDVEHHQLQWHUZRUNLQJZLWKDQHWZRUNZKLFKGRHVQRWSURYLGHFDXVHVIRUDFWLRQVLWWDNHVWKXVWKHSUHFLVHFDXVHIRUDPHVVDJHZKLFKLVEHLQJVHQGFDQQRWEHDVFHUWDLQHG 2WKHUYDOXHVLQWKLVUDQJHDUHUHVHUYHGGHILQHGE\*60$QQH[(YDOXHV 7HOHPDWLFLQWHUZRUNLQJQRWVXSSRUWHG[ 6KRUWPHVVDJH7\SHQRWVXSSRUWHG[[ &DQQRWUHSODFHVKRUWPHVVDJH[[ 8QVSHFLILHG733,'HUURU[[ 'DWDFRGLQJVFKHPHDOSKDEHWQRWVXSSRUWHG[ 0HVVDJHFODVVQRWVXSSRUWHG[ 8QVSHFLILHG73'&6HUURU[[ &RPPDQGFDQQRWEHDFWLRQHG[ &RPPDQGXQVXSSRUWHG[ 8QVSHFLILHG73&RPPDQGHUURU[ 73'8QRWVXSSRUWHG[[ 6&EXV\[ 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 1031R6&VXEVFULSWLRQ[ 6&V\VWHPIDLOXUH[ ,QYDOLG60(DGGUHVV[ 'HVWLQDWLRQ60(EDUUHG[ 605HMHFWHG'XSOLFDWH60[ 7393)QRWVXSSRUWHG; 7393QRWVXSSRUWHG; 6,0606VWRUDJHIXOO[ 1R606VWRUDJHFDSDELOLW\LQ6,0[ (UURULQ06[ 0HPRU\&DSDFLW\([FHHGHG; 6,0$SSOLFDWLRQ7RRONLW%XV\[[ 8QVSHFLILHGHUURUFDXVH   2WKHU YDOXHV LQ WKLV UDQJH DUH UHVHUYHG GHILQHG E\ *60  VXEFODXVHYDOXHV 0(IDLOXUH 606VHUYLFHRI0(UHVHUYHG RSHUDWLRQQRWDOORZHG RSHUDWLRQQRWVXSSRUWHG LQYDOLG3'8PRGHSDUDPHWHU LQYDOLGWH[WPRGHSDUDPHWHU 6,0QRWLQVHUWHG 6,03,1UHTXLUHG 3+6,03,1UHTXLUHG 6,0IDLOXUH 6,0EXV\ 6,0ZURQJ 6,038.UHTXLUHG 6,03,1UHTXLUHG 6,038.UHTXLUHG PHPRU\IDLOXUH LQYDOLGPHPRU\LQGH[ PHPRU\IXOO 606&DGGUHVVXQNQRZQ QRQHWZRUNVHUYLFH QHWZRUNWLPHRXW 
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 104QR&10$DFNQRZOHGJHPHQWH[SHFWHG XQNQRZQHUURU 2WKHUYDOXHVLQWKLVUDQJHDUHUHVHUYHG PDQXIDFWXUHUVSHFLILF
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 105Appendix C. Technical Support System integrators setting up the CSL CS208 Integrated Reader may encounter some problems. To quickly solve that, they are welcome to send the symptoms and configuration files back to techsupport@convergence.com.hk for support. Please send the following: 1) CS208 Factory Serial Number - best to take a photo of the label at the back of the reader and send the photo to CSL technical support team. 2) Current firmware versions of reader. 3) Current library version on PC side. 4) Brief description of problems. 5) Check Firewall setting in user PC. Turn it off when test RFID reader. 6) Capture the IP packet exchanges using Wireshark (See “5.1 Wireshark - network protocol analyzer”). Save the captured file (*.pcagng) and send to CSL. 7) Screen capture of command window of Control Port and Debug Port. 8) Screen capture of CS208 Back End Server window. 9) Photos of the overall site (if that can be released). Send the above sets of data to techsupport@convergence.com.hk
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 106Appendix D. RFID Basics Passive tag RFID technology involves the reader, the antenna and the tag. The reader sends out energy in the relevant frequency band to the antenna via RF cables, and the antenna radiates the energy out. This energy impinges on an RFID tag. The RFID tag consists of an antenna coupled to an RFID IC. This IC converts the AC voltage it receives at the antenna port to DC voltage that in turn is used to empower the digital circuit inside. The digital circuit then turns on and off some components connected to the antenna port, thereby changing its scattering behavior, in a pre-designed clock rate. This changing of antenna port parameters then causes a “modulation” of the back-scattered RF energy. This modulated back-scattered energy is detected by the reader and the modulation is captured and analyzed.
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 107Appendix E. Operation Profiles for RFID Region 2: FCC Profile 0 1 2 3 4 5 R-T Modulation DSB-ASK DSB-ASK PR-ASK PR-ASK DSB-ASK PR-ASK Tari (ȝs) 25.00 12.50 25.00 25.00 6.25 25.00 R-T speed (kbps) 40 80 40 40 160 40 PIE 2:1 2:1 1.5:1 1.5:1 1.5:1 1.5:1 Pulse Width (uS) 12.50 6.25 12.50 12.50 3.13 12.50 T-R LF (kbps) 40 160 250 300 400 250 T-R Modulation FM0 Miller-2 Miller-4 Miller-4 FM0 Miller-2 Divide Ratio 8 8 64/3 64/3 8 64/3 T-R Data Rate (kbps) 40 80 62.5 75 400 125
CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS USER'S MANUAL, VERSION 1.0.0 Copyright © Convergence Systems Limited, All Rights Reserved 108Appendix F. RFID channels Region 2: FCC Channel number Frequency (MHz) Channel number Frequency (MHz) Channel number Frequency (MHz) 1 902.75 18 911.25 35 919.75 2 903.25 19 911.75 36 920.25 3 903.75 20 912.25 37 920.75 4 904.25 21 912.75 38 921.25 5 904.75 22 913.25 39 921.75 6 905.25 23 913.75 40 922.25 7 905.75 24 914.25 41 922.75 8 906.25 25 914.75 42 923.25 9 906.75 26 915.25 43 923.75 10 907.25 27 915.75 44 924.25 11 907.75 28 916.25 45 924.75 12 908.25 29 916.75 46 925.25 13 908.75 30 917.25 47 925.75 14 909.25 31 917.75 48 926.25 15 909.75 32 918.25 49 926.75 16 910.25 33 918.75 50 927.25 17 910.75 34 919.25

Navigation menu