Controlled Entry Distributors 295SEPCV 295SEP Series User Manual 295ALT

Controlled Entry Distributors, Inc. 295SEP Series 295ALT

Exhibit 8

1A - General informationTransmitter Solutions - Stingray 295SEPAxV is a visor transmitteroperating at 295 MHz in ASK modulation. It has been designed for usewith programmable telephone entry, security, and access controlsystems operating with a 295 MHz frequency receiver.The protocol is AUTOkey compatible and the code sent by thetransmitter includes a 24 bit security code which allows up to1B - Technical specificationsNumber of keys: 1 / 2Battery life: 12 - 18 monthsCurrent consumption : 20 mAOperating frequency : 295 MHzCode combinations :Modulation : AM / ASKRated e.r.p. : 50 - 100 mWRange in free space: 60 - 120 ydOperating temperature: -20 ÷ +55 °COverall dimensions: 3.26 x 1.88 x 0.62 inWeight: 20 gr.Supply : 1 Alkaline Battery 12V type 23A16,777,21616,777,216 code combinations. Each transmitter is individuallynumbered, can be used with any receiver capable of receiving a 33 bitinput and can operate any type of access control system equipped withthe same protocol. The 23A alkaline battery has a life of about 12-18months. The product fully complies Part 15 of FCC Regulations.1C - Main featuresTRANSMITTER STINGRAY 295SEPAxVManual1A - General information1B - Technical specifications1C - Main features1D -Types1 - TRANSMITTER INTRODUCTION2 - NUMBERING3 - PROGRAMMING4 - OPERATION5 - BATTERY ACCESSCONTENTS6 - TROUBLESHOOTINGTransmitterSolutionsThank you for choosing a Transmitter Solutions product .Please read this manual carefully before using the product.Made in Italy. Copyright © 2006 by Transmitter Solutions295SEPA1V 295SEPA2VPush-buttonAlight greyPush-buttonBlight greyKey holderringBatterydoorRedLEDenclosureblack
2 - NUMBERING5 - BATTERY ACCESS6 - TROUBLESHOOTINGTo access the battery slide out the battery doorPlace the alkaline battery between the 2 contacts.Respect the right polarity as indicated on the bottom of the box.23ANOTE: Please dispose of the batteries properly according to local laws andregulations.Test proper battery installation by verifying that the red LED illuminates wheneither button is pushed.Each transmitter is manufactured and sold with a different factory set sequencenumber and facility code.FCC ID : SU7295SEPCVThis device complies with FCC RulesOperation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept interference received, includinginterference that may cause undesired operation.Part. 15 of the+_23ABatteryPolarityOPENFAULT SOLUTIONThe operating range is reducedCheck to verify thetransmitter is programmedinto your systemReplace the transmitterbatteriesReplace the transmitterbatteriesThe system does not receiver thetransmitter signal.The transmitter LED is ONThe system does not receiver thetransmitter signal.The transmitter LED will not light3 - PROGRAMMINGThe transmitter facility code and sequence number must be programmed into yoursystem memory. Your own installer or reseller will provide you the necessaryinstructions for your system.4 - OPERATIONa. Firmly depress either button until the small red LED illuminates.b. After the LED has illuminated, release the button. If the device you are attemptingto activate does not respond, repeat steps a. and b. or consult section 6(Troubleshooting) of this manual.IS-T11295ACCUK Rev. 0 del 27.06.06The warranty period of 295 transmitters is 24 months,beginning from the manufacturing date of the transmitter. During this period, if theproduct does operate correctly, due to a defective component, the product will berepaired or replaced at the sole discretion of .The warranty does not extend to the transmitter case which can be damaged byconditions outside the control of or to battery life.Transmitter SolutionsTransmitter SolutionsTransmitter SolutionsWARRANTYNoticeAny changes or modification to equipment not expresslyapproved by could void the manufacturer’s warranty and theuser’s authority to operate this product.Transmitter SolutionsTransmitter SolutionsTRANSMITTER SOLUTIONS2505 Chandler Avenue, Suite, 1Las Vegas, NV 89120 -(866) 975-0101 - (866) 975-0404 Faxsales@transmittersolutions.com1D - TypesSTINGRAY 295SEPA1V : 1 button transmitterSTINGRAY 295SEPA2V : 2 button transmitter
1A - General informationTransmitter Solutions - Stingray 295SEPCxV is a visor transmitteroperating at 295 MHz in ASK modulation. It has been designed for usewith programmable telephone entry, security, and access controlsystems operating with a 295 MHz frequency receiver. The protocol isClikCard® compatible and the code sent by the transmitter includes a16 bit security code which allows up to 65,536 combinations and 6 bit1B - Technical specificationsNumber of keys: 1 / 2Battery life : 12 - 18 monthsCurrent consumption : 20 mAOperating frequency : 295 MHzCode combinations :Modulation : AM / ASKRated e.r.p. : 50 - 100 mWRange in free space: 60 - 120 ydOperating temperature: -20 ÷ +55 °COverall dimensions: 3.26 x 1.88 x 0.62 inWeight: 20 gr.Supply : 1 Alkaline Battery 12V type 23A65,536Facility codes 64of facility code for 64 different combinations. Each transmitter isindividually numbered, can be used with any receiver capable ofreceiving a 26 bit input and can operate any type of access controlsystem equipped with the same protocol. The 23A alkaline battery has alife of about 12-18 months. The product fully complies Part 15 of FCCRegulations.1C - Main featuresTRANSMITTER STINGRAY 295SEPCxVManual1A - General information1B - Technical specifications1C - Main features1D -Types1 - TRANSMITTER INTRODUCTION2 - NUMBERING3 - PROGRAMMING4 - OPERATION5 - BATTERY ACCESSCONTENTS6 - TROUBLESHOOTINGTransmitterSolutionsThank you for choosing a Transmitter Solutions product .Please read this manual carefully before using the product.Made in Italy. Copyright © 2006 by Transmitter Solutions295SEPC1V 295SEPC2VPush-buttonAdark greyPush-buttonBdark greyKey holderringBatterydoorRedLEDenclosurelight grey
2 - NUMBERING5 - BATTERY ACCESS6 - TROUBLESHOOTINGTo access the battery slide out the battery doorPlace the alkaline battery between the 2 contacts.Respect the right polarity as indicated on the bottom of the box.23ANOTE: Please dispose of the batteries properly according to local laws andregulations.Test proper battery installation by verifying that the red LED illuminates wheneither button is pushed.Each transmitter is manufactured and sold with a different factory set sequencenumber and facility code.+_23ABatteryPolarityOPENFAULT SOLUTIONThe operating range is reducedCheck to verify thetransmitter is programmedinto your systemReplace the transmitterbatteriesReplace the transmitterbatteriesThe system does not receiver thetransmitter signal.The transmitter LED is ONThe system does not receiver thetransmitter signal.The transmitter LED will not light3 - PROGRAMMINGThe transmitter facility code and sequence number must be programmed into yoursystem memory. Your own installer or reseller will provide you the necessaryinstructions for your system.4 - OPERATIONa. Firmly depress either button until the small red LED illuminates.b. After the LED has illuminated, release the button. If the device you are attemptingto activate does not respond, repeat steps a. and b. or consult section 6(Troubleshooting) of this manual.IS-T11295CCCUK Rev. 0 del 27.06.06The warranty period of 295 transmitters is 24 months,beginning from the manufacturing date of the transmitter. During this period, if theproduct does operate correctly, due to a defective component, the product will berepaired or replaced at the sole discretion of .The warranty does not extend to the transmitter case which can be damaged byconditions outside the control of or to battery life.Transmitter SolutionsTransmitter SolutionsTransmitter SolutionsWARRANTYTRANSMITTER SOLUTIONS2505 Chandler Avenue, Suite, 1Las Vegas, NV 89120 -(866) 975-0101 - (866) 975-0404 Faxsales@transmittersolutions.com1D - TypesSTINGRAY 295SEPC1V : 1 button transmitterSTINGRAY 295SEPC2V : 2 button transmitterFCC ID : SU7295SEPCVThis device complies with FCC RulesOperation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept interference received, includinginterference that may cause undesired operation.Part. 15 of theNoticeAny changes or modification to equipment not expresslyapproved by could void the manufacturer’s warranty and theuser’s authority to operate this product.Transmitter SolutionsTransmitter Solutions

Navigation menu