Compex Systems WPJ558 WIRELESS ACCESS POINT User Manual

Compex Systems Pte Ltd WIRELESS ACCESS POINT

User Manual

wireless embedded boardsLast Updated: 30/03/2016Multi-function QCA9558 Embedded Board with on-board Wireless700MHz CPU / 2x GE Port / 1 x Mini PCI-e / Designed for 3x3 802.11acKEY FEATURES• Qualcomm Atheros QCA9558 MIPS 74Kc 700MHz CPU• 128MB System Memory• 16MB NOR Flash• On-board 2.4GHz max 24dBm output power • IEEE 802.11n compliant & backward compatible with 802.11b/g• 3x3 On-board radio up to 450Mbps physical data rate• 1x Mini PCI Express Slot at 9.2mm Height• 2x Gigabit LAN RJ45 with Auto MDI/X• Integrated 48V IEEE 802.3af/at Power Over Ethernet Specications Chipset CPU: Qualcomm Atheros QCA9558 700MHzSystem Memory 128MB DDR2NOR Flash 16MBWireless Built in 2.4GHz 802.11b/g/n at 28dBm (aggregate)3x U.FL connectors Expansion 1x 9.2mm height Mini PCI-e slotInterface 2x Gigabit Ethernet Port (Auto MDI-X)1x JTAG 14 Pin Connector11x Serial Port 4 Pin Connector2Reset Button YesLED 6x LED IndicatorsPower Over Ethernet 1x IEEE 802.3af/at or Passive PoE input minimum 36VDC Power 1x DC Jack Connector: 24 - 56VPower Consumption 8.6 Watt (Max)Operating System CompexWRT or OpenWRT3RoHS Compliance YesEnvironmental Temperature: Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºCHumidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90%Dimensions (W x H x D) 117 x 105 x 17 mmOther Features Surge Suppressor, Watchdog Timer1.The Serial Port is a 4-pin header (TTL). A Serial Converter is available to change the TTL signals on board to RS-232 signals for debugging.2.The JTAG Port is a 14-pin header. A JTAG kit is for writing your self-developed loader and rmware directly.3. For more information on OpenWRT, please refer to the Firmware / Software Section.*Congurations are subject to change without notications.Model: WPJ558
2wireless embedded boardsCompex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HBCopyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.RF Performance TableMechanical DimensionsData Rate TX Power (per chain)TX Power (3 chains) Tolerance2.4GHz802.11b1Mbps 21dBm ±1dB2Mbps 21dBm ±1dB5.5Mbps 20dBm ±1dB11Mbps 20dBm ±1dB2.4GHz802.11g6Mbps 21dBm ±1dB9Mbps 21dBm ±1dB12Mbps 21dBm ±1dB18Mbps 20dBm ±1dB24Mbps 20dBm ±1dB36Mbps 19dBm ±1dB48Mbps 19dBm ±1dB54Mbps 19dBm ±1dB2.4GHz802.11nHT20MCS 0 20dBm 25dBm ±1dBMCS 1 19dBm 24dBm ±1dBMCS 2 19dBm 24dBm ±1dBMCS 3 19dBm 24dBm ±1dBMCS 4 18dBm 23dBm ±1dBMCS 5 18dBm 23dBm ±1dBMCS 6 17dBm 22dBm ±1dBMCS 7 17dBm 22dBm ±1dB2.4GHz802.11nHT40MCS 0 16dBm 21dBm ±1dBMCS 1 16dBm 21dBm ±1dBMCS 2 15dBm 20dBm ±1dBMCS 3 15dBm 20dBm ±1dBMCS 4 15dBm 20dBm ±1dBMCS 5 14dBm 19dBm ±1dBMCS 6 14dBm 19dBm ±1dBMCS 7 13dBm 18dBm ±1dBData Rate RX Specifications Sensitivity Tolerance2.4GHz802.11b1Mbps -95dBm ±2dB2Mbps -93dBm ±2dB5.5Mbps -90dBm ±2dB11Mbps -88dBm ±2dB2.4GHz802.11g6Mbps -94dBm ±2dB9Mbps -94dBm ±2dB12Mbps -93dBm ±2dB18Mbps -93dBm ±2dB24Mbps -90dBm ±2dB36Mbps -86dBm ±2dB48Mbps -82dBm ±2dB54Mbps -79dBm ±2dB2.4GHz802.11nHT20MCS 0 -94dBm ±2dBMCS 1 -94dBm ±2dBMCS 2 -92dBm ±2dBMCS 3 -88dBm ±2dBMCS 4 -84dBm ±2dBMCS 5 -81dBm ±2dBMCS 6 -78dBm ±2dBMCS 7 -75dBm ±2dB2.4GHz802.11nHT40MCS 0 -93dBm ±2dBMCS 1 -91dBm ±2dBMCS 2 -90dBm ±2dBMCS 3 -85dBm ±2dBMCS 4 -82dBm ±2dBMCS 5 -78dBm ±2dBMCS 6 -75dBm ±2dBMCS 7 -72dBm ±2dBCaution: The EUT can install PCI module but if the OEM or applicant can't install randomly. They should get the manufacturer authorizationand re-certification.
3wireless embedded boardsCompex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HBCopyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.Component and Connector MapCompexWRT FeaturesIt is developed based on the OpenWRT platform and features the latest Qualcomm Atheros drivers with LuCI web interface. It combines all of the best in one system. It offers many levels of customization.Powerful Wireless Features• Qualcomm Atheros Drivers• Native 802.11ac Support• Wireless Distribution System (WDS) AP and Client Mode • Seamless Mesh NetworkingEnhanced Control• User-friendly LuCI Graphical User Interface• Hotspot and Guest Portal Support• Powerful Network Diagnostic Utilities• Real-time Network Load GraphsFind out more at http://wiki.compex.com.sg/
6wireless embedded boardsCompex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HBCopyright © Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice.Ordering OptionsItem Code Firmware Processor Power Solutions NOR Flash MemoryWPJ558 CompexWRT QCA9558 DC: 24-56V 16MB 128MBPackaging ContentItem QuantityWPJ558 Embedded Board 1Read Me First Documentation 1Packaging InformationPackaging Type Dimensions Nett Weight Gross WeightCarton Box (50 units) 875 x 330 x 205 mm 5.2 kg 6.7 kgFirmware / SoftwareThe WPJ558 is shipped with the versatile CompexWRT firmware.OpenWRT SDK is provided for further development. SDKs with QCA binary drivers are available for software developers.WPJ558 supported Operating System • CompexWRT Operating System• OpenWRT Operating System1WPJ558 supported Mass Management Software • Compex AP Controller Software21. OpenWRT SDK is available without any technical support by Compex unless otherwise stated.2. AP Controller only compatbiel with WPJ558 running CompexWRT.
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.

Navigation menu