Compex Systems WLM200NX WIRELESS-N NETWORK MINI PCI ADAPTER User Manual wlm200nx

Compex Systems Pte Ltd WIRELESS-N NETWORK MINI PCI ADAPTER wlm200nx

WLM200NX_User Manual

WLM200NX MiniPCI network adapter provides leading 802.11a/b/g/n performance, supporting up to 300Mbps physical data rates and 200Mbps of actual user throughput on both the uplink and downlink. With the dual-band design you will enjoy universal connectivity to any 802.11 devicethrough your wireless AP or wireless Router. Built on Atheros chipset, it can be used with all draft IEEE 802.11ncompatible WLANs, and is ideally suited to be integrated into a widerange of OEM devices. Features • 2.4/5GHz IEEE 802.11a/b/g/n standard • Output Power of up to 20dBm @ a/b/g/n Band • Support for up to 2x2 MIMO with spatial multiplexing • Four times the throughput of 802.11b/g and 802.11a • Wireless Encryption and Authentication Supported • Transmission Power Control (TPC) • Enhanced performance with Atheros XSPAN technology Optimized for higher throughput at long range • High Performance (up to 300Mbps physical data rates and 200Mbps of actual throughput) with Low Power Consumption • Multi-Country Roaming Support (IEEE802.11d) • 2 X U.FL Antenna Connector • Suitable for Embedded System or OEM Project • Affordable and Ideal for a Variety of Applications • WLM200NX MINIPCI 2 x 2 802.11N MIMO mini-PCI Modules
Technical Specifications Chipset AR9220 Host Interface PCI Interface v2.3 (Type III-B Mini PCI form factor) Operating Voltage 3.3 VDC Power Consumption 2.4W Antenna Connector 2 x U.FL Antenna Connector IEEE 802.11a : 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps IEEE 802.11b : 11Mbps 5.5Mbps 2Mbps 1Mbps 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps automatically IEEE 802.11g : Fallback to 5.5Mbps, 2Mbps, 1Mbps 1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.) 20MHZ 2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.) 1Nss: 135Mbps @ 800GI, 150Mbps @ 400GI (Max.) Data Rate IEEE 802.11n : 40MHz 2Nss: 270Mbps @ 800GI, 300Mbps @ 400GI (Max.) Modulation Techniques OFMD: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK Security 64/128-bit WEP, TKIP, AES, IEEE802.1x authentication Certificate FCC, CE ROHS Compliance Yes Environment Specifications Operating: -20ºC to 70ºC Storage: -65ºC to 100º Humidity 5% to 95% (non-condensing) Dimension 59.6 x 51 x 3 mm WLM200NX MIMO MINIPCI CARD RADIO TX SPECIFICATIONS TX SPECIFICATIONS DataRate TX Power Tolerance DataRate TX Power Tolerance6-24Mbps 18dBm ±2dB 1Mbps 20dBm ±2dB 36Mbps 18dBm ±2dB 2Mbps 20dBm ±2dB 48Mbps 17dBm ±2dB 5.5Mbps 20dBm ±2dB 802.11a 54Mbps 16dBm ±2dB 802.11b11Mbps 20dBm ±2dB 6-24Mbps 20dBm ±2dB HT20 @800GI(400GI): +16 ~ +20dBm 36Mbps 19.5dBm ±2dB 2.4GHz HT40 @800GI(400GI): +14 ~ +18dBm 48Mbps 18.5dBm ±2dB 5GHz HT20 @800GI(400GI): +10 ~ +18dBm 802.11g 54Mbps 17dBm ±2dB 802.11n RX SPECIFICATIONS（802.11b） Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance 1M -96/-92Bm ±2dB 5.5M -94/-90dBm ±2dB 802.11b 11M -91/-87dBm ±2dB RX SPECIFICATIONS(802.11a) RX SPECIFICATIONS（802.11g） Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance Data Rate Sensitivity (Typical/Maximum 2Rx) Tolerance6M -95/-91dBm ±2dB 6M -96/-92dBm ±2dB 9M -95/-91dBm ±2dB 9M -96/-92dBm ±2dB 12M -95/-91dBm ±2dB 12M -96/-92dBm ±2dB 18M -94/-90dBm ±2dB 18M -95/-91dBm ±2dB 24M -90/-86dBm ±2dB 24M -92/-88dBm ±2dB 36M -87/-83dBm ±2dB 36M -89/-85dBm ±2dB 48M -83/-79dBm ±2dB 48M -85/-81dBm ±2dB 802.11a 54M -82/-78dBm ±2dB 802.11g54M -83/-79dBm ±2dB
MCS0 -95/-91dBm ±2dB MCS0 -96/-92dBm ±2dB MCS1 -94/-90dBm ±2dB MCS1 -95/-91dBm ±2dB MCS2 -92/-88dBm ±2dB MCS2 -93/-89dBm ±2dB MCS3 -88/-84dBm ±2dB MCS3 -90/-86dBm ±2dB MCS4 -85/-81dBm ±2dB MCS4 -87/-81dBm ±2dB MCS5 -81/-77dBm ±2dB MCS5 -83/-76dBm ±2dB MCS6 -80/-76dBm ±2dB MCS6 -81/-76dBm ±2dB MCS7 -77/-73dBm ±2dB MCS7 -79/-73dBm ±2dB MCS8 -94/-90dBm ±2dB MCS8 -95/-91dBm ±2dB MCS9 -92/-87dBm ±2dB MCS9 -93/-89dBm ±2dB MCS10 -89/-85dBm ±2dB MCS10 -90/-86dBm ±2dB MCS11 -86/-82dBm ±2dB MCS11 -87/-83dBm ±2dB MCS12 -83/-79dBm ±2dB MCS12 -84/-80dBm ±2dB MCS13 -78/-74dBm ±2dB MCS13 -79/-75dBm ±2dB MCS14 -77/-73dBm ±2dB MCS14 -77/-73dBm ±2dB 802.11a/n HT20 MCS15 -74/-69dBm ±2dB 802.11 b/g/n HT20 MCS15 -75/-71dBm ±2dB MCS0 -91/-87dBm ±2dB MCS0 -90/-86dBm ±2dB MCS1 -90/-86dBm ±2dB MCS1 -90/-86dBm ±2dB MCS2 -88/-84dBm ±2dB MCS2 -89/-85dBm ±2dB MCS3 -85/-81dBm ±2dB MCS3 -87/-82dBm ±2dB MCS4 -82/-78dBm ±2dB MCS4 -84/-79dBm ±2dB MCS5 -78/-74dBm ±2dB MCS5 -79/-75dBm ±2dB MCS6 -77/-73dBm ±2dB MCS6 -78/-74dBm ±2dB MCS7 -74/-70dBm ±2dB MCS7 -75/-71dBm ±2dB MCS8 -91/-87dBm ±2dB MCS8 -90/-86dBm ±2dB MCS9 -88/-84dBm ±2dB MCS9 -89/-85dBm ±2dB MCS10 -86/-82dBm ±2dB MCS10 -87/-83dBm ±2dB MCS11 -83/-79dBm ±2dB MCS11 -84/-80dBm ±2dB MCS12 -80/-76dBm ±2dB MCS12 -81/-77dBm ±2dB MCS13 -75/-71dBm ±2dB MCS13 -76/-72dBm ±2dB MCS14 -73/-69dBm ±2dB MCS14 -74/-68dBm ±2dB 802.11a/n HT40 MCS15 -70/-66dBm ±2dB 802.11 b/g/n HT40 MCS15 -71/-67dBm ±2dB DRIVER INFORMATION Driver Linux Madwifi, WindowsXP , Windows 2000,Windwos Vista c Configurations are subjected to change without notice
COMPLIANCE INFORMATION FCC NOTICE This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Connect the computer into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the computer and receiver. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. RF exposure warning The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: TK4WLM200NX IMPORTANT NOTE: EQUIPMENT MANUFACTURERS COMPEX FOR DISPLAYING WLM200NX MODULAR FCC ID ON FINAL INTEGRATED
FCC ID: TK4WLM200NX IMPORTANT NOTE: EQUIPMENT MANUFACTURERS COMPEX FOR DISPLAYING WLM200NX MODULAR FCC ID ON FINAL INTEGRATED OEM integration instructions:This device is intended only for OEM integrators under the following conditions：The module is only limited to installation in mobile applications. The antenna must be installedsuch that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with theintegral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met，further transmitter test will not be required.However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed (for example，digital device emission，PC peripheral requirements，etc.)End product labeling:This transmitter module is authorization only for use in device where the antenna may beinstalled such that 20cm may be maintained between the antenna and users. The final endproduct must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: TK4WLM200NX or Contains FCC ID: TK4WLM200NX”.

Navigation menu