Compex Systems 08-WLM54AP26 WIRELESS-A 26DBM NETWORK MINI PCI ADAPTER User Manual TK4 08 WLM54AP26

Compex Systems Pte Ltd WIRELESS-A 26DBM NETWORK MINI PCI ADAPTER TK4 08 WLM54AP26

user manual

IWAVEPORT WLM54AP26 USER MANUAL
© Copyright 2007 Compex Systems Pte Ltd All Rights Reserved This document contains information, which is protected by copyright. Reproduction, adaptation or translation without prior permission is prohibited, except as allowed under the copyright laws. Trademark Information Compex® is a registered trademarks of Compex, Inc. Microsoft Windows and the Windows logo are the trademarks of Microsoft Corp. NetWare is the registered trademark of Novell Inc. All other brand and product names are trademarks or registered trademarks of their respective owners. Notice: Copyrights © 2007 by Compex, Inc. All rights reserved. Reproduction, adaptation, or translation without prior permission of Compex, Inc. is prohibited, except as allowed under the copyright laws. Manual Revision by Daniel Disclaimer Compex, Inc. provides this manual without warranty of any kind, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product described in this manual, without prior notice. Compex, Inc will not be liable for any technical inaccuracies or typographical errors found in this guide. Changes are periodically made to the information contained herein and will be incorporated into later versions of the manual. The information contained is subject to change without prior notice. Your Feedback We value your feedback. If you find any errors in this user’s manual, or if you have suggestions on improving, we would like to hear from you. Please contact us at: Fax: (65) 62809947 Email: feedback@compex.com.sg
FCC NOTICE This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Connect the computer into an outlet on a circuit different from that to which the receiver is connected. • Increase the separation between the computer and receiver. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their
endproduct for any additional compliance requirements required with this module installed (for example, LVD TV …etc.). End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: TK4-08-WLM54AP26 ” ICES 003 Statement This Class B digital apparatus complies with Canadian ICES-003. Declaration of Conformity Compex, Inc. declares the following: Product Name: Compex Wireless Mini-PCI Network Adapter Model No.: Compex iWavePort WLM54AP26 conforms to the following Product Standards: Radiated Emission Standards: ETSI EN 300 328-2: July 2000; FCC: 47 CFR Part 15, Subpart B, ANSI C63.4-1992; 47 CFR Part 15, Subpart C (Section 15.247), ANSI C63.4-1992. Conducted Emission Standards: ETS 300 826: Nov. 1997. Immunity Standards: IEC 801-2; IEC 801-3; IEC 801-4 Low Voltage Directive: EN 60 950:1992+A1: 1993+A2: 1993+A3; 1995+A4; 1996+A11: 1997 Therefore, this product is in conformity with the following regional standards: FCC Class B ⎯ following the provisions of FCC Part 15 directive; CE Mark ⎯ following the provisions of the EC directive. This Class B digital apparatus complies with Canadian ICES-003. Technical Support Information The warranty information and registration form are found in the Quick Install Guide. For technical support, you may contact Compex or its subsidiaries. For your convenience, you may also seek technical assistance from the local distributor, or from the authorized dealer/reseller that you have purchased this product from. For technical support by email, write to support@compex.com.sg. Refer to the table below for the nearest Technical Support Centers:
Technical Support Centers Contact the technical support center that services your location. U.S.A., Canada, Latin America and South America  Write Compex, Inc. 840 Columbia Street, Suite B, Brea, CA92821, USA  Call Fax Tel: Tel: Fax: +1 (714) 482-0333 (8 a.m.-5 p.m. Pacific time) +1 (800) 279-8891 (Ext.122 Technical Support) +1 (714) 482-0332 Asia, Australia, New Zealand, Middle East and the rest of the World  Write Compex Systems Pte Ltd 135, Joo Seng Road #08-01, PM Industrial Building Singapore 368363  Call Fax Tel: Tel: Fax: (65) 6286-1805 (8 a.m.-5 p.m. local time) (65) 6286-2086 (Ext.199 Technical Support) (65) 6283-8337 Internet access/ E-mail: FTPsite: support@compex.com.sg Ftp.compex.com.sg Website: http://www.cpx.com or http://www.compex.com.sg Product Overview ·Introduction Thank you for purchasing this Wireless Network Adapter. Data security is facilitated with WPA, IEEE 802.1x Authentication and 64-bit, 128-bit and 152-bit WEP (Wired Equivalent Privacy). They support easy Plug and Play installation and combine simplicity, data privacy, and reliability for your wireless network. Chapter 1 Basic Setup This chapter outlines the basic requirement for the installation and configuration of the network adapter. This network adapter is a plug-and-play device. You can plug it into the PCI slot of your PC for auto-detection. 1.1 Hardware Installation
1. Turn off your PC and switch off the power from the main power supply. 2. Remove the back cover of the PC. 3. Then insert the network adapter into your PCI slot as shown below. Ensure that the network adapter is properly seated into the slot. 4. Replace the back cover. 5. Power on your PC. WLM54AG PCI slot
1.2 Driver & Utility Installation 1. Insert the Product CD into your computer CD-ROM drive. 2. Click on Driver & Utility section and the system will run the setup.exe automatically. 3. Next, the Atheros Client Installation Program screen appears. Click on the Next> button to proceed. 4. When the License Agreement screen appears, you are required to read and accept the agreement to continue. Click on the Next> button to proceed.
5. Select your preferred setup: Install Client Utilities and Driver (Recommended) option You are recommended to select this setup type. This option will install both the driver and utility that support your PCI adapter. Install Driver Only option (For Windows XP user only) Select this option if you are going to use the Wireless Zero Configuration Utility to configure your PCI adapter. Note that only Windows XP comes with the Wireless Zero Configuration Utility. Make Driver Installation Diskette(s) Select this option if you wish to make a duplicate copy of the driver and store to the diskette/s. 6. Click on the Next> button and follow the instructions stated on the screen.
For Windows XP users 7. If you are using Windows XP as operating system, the following screen will appear. Read the notice carefully and click on the Next> button to proceed. 8. Select your choice of tool to assist you in configuring your adapter. Click on the Next> button to proceed. Atheros Client Utility (ACU) and Supplicant option Select this option to install your network adapter. (Recommended) Third Party Supplicant option Select this option if you decide to use Wireless Zero Configuration Utility to configure your wireless device. Installing this tool will only allow you to view the status of the connected wireless device/s through the utility; configuration using the utility will not be allowed.
If you have selected Third Party Supplicant configuration tool, a screen similar to that below will appear, prompting you to enable/disable the system tray icon. 9. Click on the checkbox besides Enable Atheros System Tray Utility and click on the Next> button to proceed. 10. The screen below appears to inform you that the driver will be automatically installed if you have already inserted your client adapter into the PCI slot of your computer. Cancel the Found New Hardware Wizard if it appears and click on the OK button to begin the installation. 11. If a similar screen similar to the one shown below appears, click on the Continue Anyway button to continue the installation.
12. Click on the OK button to reboot your system and this will complete the installation. Chapter 2 Using the System Tray Utility This chapter will elaborate on the Atheros system tray utility found at the right bottom corner of your screen. Right click on the utility icon and the menu will appear. The following explains the different options available on the menu:
Help Open the online help. Exit Exit the Atheros Client Utility application. Once you exit, the icon will disappear from the system tray. Open Atheros Client Utility… Launch the Client Utility. Wireless-G Excellent Signal Strength Example Wireless-AG No Link Example Manual LEAP Login If you select this option, you will have to manually start the LEAP authentication process to login to the network instead of being prompted for your LEAP username and password during your windows logon. Different signal strength indications
Reauthenticate Reauthenticate to a LEAP-configured access point each time you login to a LEAP network. Select Profile Click on a configuration profile name to switch to a particular wireless network. If no configuration profile exists, you will need to add a profile first. Connection Status To view the connection status of your wireless PCI adapter. Alternatively, you may also double click on the utility icon in the system tray. Active Profile Displays the name of the active configuration profile. Auto Profile Selection Shows whether auto profile selection is enabled. Connection Status Displays whether the adapter is connected to a wireless network.
Link Quality States the quality of the link connection. SSID Displays the SSID of the network to which the network adapter is associated. Access Point Name Shows the name of the access point the wireless adapter is connected to (if any). Access Point IP Address Shows the IP address of the access point the wireless adapter is connected to (if any). Current Receive Rate Displays the data rate at which the wireless adapter is currently receiving from the wireless network. Current Transmit Rate Displays the data rate at which the wireless adapter is currently transmitting to the wireless network. Link Speed States the speed of the link connection. Client Adapter IP Address Displays the IP address of the wireless adapter.
Chapter 3 Utility Features This chapter shows you how to make use of the utility to view the status of your wireless connection, to change your settings and also to monitor your wireless performance via the network statistics. 3.1 Current Status Tab Displays the performance of the network adapter in the wireless network. Wireless-AG Current Status Upon clicking on the Advanced button, you will be able to view all information on the respective profile, e.g. the types of encryption and authentication, the signal strength, the MAC address of the connected AP (if you are in Infrastructure mode), etc.
3.2 Profile Management Tab Selecting this tab displays the profiles and the details. You only need to create a profile if you have more than one wireless connection. 3.3 Diagnostics Tab The Diagnostics tab lists the following receive and transmit diagnostics for packets received by or transmitted to the network adapter. • Multicast packets transmitted and received • Broadcast packets transmitted and received • Unicast packets transmitted and received • Total bytes transmitted and received
This button shows more detailed statistical information on frames that are either received by or transmitted by the network adapter. This button allows you to run the diagnostic test, save the test report and view the test results on the wireless adapter configuration and association.
Chapter 4 Utility Configuration This chapter will elaborate on the Client Manager configuration of the network adapter using some simple examples. the wireless clients communicate through router, which are devices that act as base station for all wireless communication. Data packets from the wireless clients are transferred to the wireless router before being transmitted to other hosts on the network. The number of wireless clients supported depends on the router.
4.1 Configuration Mode In this example, three work station act as wireless clients to communicate with the wireless router. Once all configuration has been done, wireless clients with the same SSID as the AP will be able to access wirelessly to PC1 via the wireless router For Router Ensure that you have enabled the DHCP server in your router and that your wireless clients are set to receive their IP address dynamically so that the wireless router can assign an IP address to them. Note the wireless configuration settings of your router as shown in the figure above.
For PC 1 1. Activate your utility. 2. Go to the Profile Management tab, click on the Scan button to look for the wireless AP. 3. Click on the Refresh button if your system is unable to detect your wireless AP. Once found, select the Network Name (SSID) used by the router: wireless-router and click on the Activate button to add it to your profile list. Notice that the SSID has already been pre-configured in this profile.
The SSID of both the wireless router and the wireless client must be the same for them to communicate with one another. 4. Enter the Profile Name, e.g. Workstation 2 for easy identification.
5. Next, proceed to the Security tab. The wireless client must use the same security mode as the router. In our example, select WPA Passphrase and click on the Configure… button. 6. Enter the encryption key in the field provided. Please note that this key must be the same as the one that you had configured for your wireless router. 7. Click on the OK button to update the changes. Proceed to your Current Status tab to monitor the connection between the router and the wireless client (PC2).
Alternatively, you can also check the connection from the MS-DOS Prompt. From PC2, simply proceed to the Start Menu, Run… and type in cmd. Click on the OK button. In the MS-DOS Prompt window, type ping 192.168.168.1 –t, whereby this IP address belongs to your access point. When the screen appears: Pinging 192.168.168.1: bytes=32 time=2ms TTL=128 Pinging 192.168.168.1: bytes=32 time=2ms TTL=128 Pinging 192.168.168.1: bytes=32 time=2ms TTL=128 ……. This indicates that the connection between the access point and the wireless client has been established successfully! 4.2 Profile Management This option allows you to manage your profile(s), set your security options, and scan for other wireless networks.
Click on New button to create a new profile. Enter the profile name (a unique name to identify this profile), a client name and the SSID of the wireless network to connect to. Note that the Client name refers to the name that is registered to your PC. You can enter up to 3 different SSIDs in order of preference, per profile. We are using ABC as the profile name and APP as the SSID1
Click on the OK button to update the changes. Notice that ABC has been added to the profile list. For details on howto set the differentauthentication andencryption typesavailable underthe Security Tab,kindly refer toChapter 7 “Typesof Authenticationand Encryptionmode”
To modify an existing profile, select the profile that you wish to modify and click on this button. We are using profile: Any as an example.
To delete an existing profile, select the particular profile that you wish to delete and click on this button. We are using profile: default as an example. Note that the active profile (the profile that you are currently using) cannot be deleted! Active profile indicated by this icon cannot be deleted!
To activate a profile, select the profile and click on this button. We are using profile: wireless-AP as an example. Once a profile is activated, this icon will appear next to the profile name: wireless-AP.
This function allows you to save the settings of your profile onto disk. Select the profile that you wish to save and click on this button. We are using profile: ESSID as an example. Choose the folder to save to, enter the name under which to save the profile and click on the Save button. Now, your profile is saved to your selected folder.
This function allows you to retrieve a saved profile from disk. We are using profile: ESSID as an example. Go to the folder where you have saved your profile, select ESSID.prf and click on the Open button. Notice that the profile: ESSID has been imported to the list of profiles. If you have created several profiles, this function allows you to establish the priority order in which the network adapter should try to connect to a WLAN. If the network adapter is unable to connect to a wireless network
through the 1st profile, it will then try to connect using the 2nd profile and so on. When auto profile selection is enabled, the network adapter scans for available wireless networks and will connect to the highest priority profile that matches the networks detected. To do so, simply click on the Add button from the Available Profiles list. Refer to the screen shown below. Please note that you need AT LEAST TWO profiles to activate the Auto Select Profiles function; and that each of your profile must connect to at least one Network Name (SSID). Notice that when a selected profile has been added, it will be transferred to the Auto Selected Profiles list. Notice that if this function isdisabled, this means thatyou have not added anyprofile in the Auto SelectedProfiles list.
Select and click on the Add button to transfer another profile. You need to transfer at least two profiles to the Auto Selected Profiles list to activate the Auto Select Profile function. Transmit Power Level Specifies the wireless transmit power to be used. Reducing the power level lowers the risk of interference with other nearby wireless devices and conserves battery power but decreases radio range. Power Save Mode (Only applicable to Infrastructure mode) This feature reduces power consumption by the PCI adapter. There are 3 options for this mode: • Off The power management is disabled and the card consumes full power from the computer. • Normal The driver turns off the power to the adapter for brief periods over briefly spaced time intervals. • Maximum The driver turns off power to the adapter for longer periods over more widely spaced time intervals. The guideline for choosing between the Normal and Maximum options:
The PCI adapter wakes up more often and responds sooner to network requests in Normal mode than in Maximum mode; and the Maximum mode consumes less power than Normal mode. Network Type Select either Infrastructure if you are connecting to the WLAN using an access point 802.11 Authentication Mode (Only applicable to Infrastructure mode, after you have enabled the encryption mode) Select which mode the wireless adapter uses to authenticate to an access point: • Auto Causes the PCI adapter to attempt authentication using shared authentication. It then switches to open authentication if shared authentication fails. • Open Enables the PCI adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if its WEP settings match those of the access point. • Shared Allows the adapter to authenticate and associate only if it has the same WEP settings as the access point
Appendix 1.Technical Specifications Network Protocol, Standards and Electrical Emissions Industry Standards • IEEE 802.11a Performance Operating Frequency • 5745-5825MHz (802.11a) • 5765-5805MHz (802.11 turbo a) Modulation • Quadrature Phase Shift Keying (QPSK) • 16 QAM • 64 QAM • DBPSK • DQPSK Antenna Type External 2dBi antenna and an SMA-type connector Network Interface PCI 2.3 compatible Physical and Environment Environmental Requirements Operating temperature: Storage temperature: Operating humidity: Non-operating humidity: 0°C to 50°C -20°C to 70°C 10% to 70% RH 5% to 90% RH Power Consumption 3.3V DC, 1500mA 1000mA Tx 500mA Rx Physical Dimension 120mm x 64.5 mm x 1.6 mm (LxWxD)

Navigation menu