Compal Communications EB-G60U GPRS GSM Phone User Manual U COVER p65

Compal Communications, Inc. GPRS GSM Phone U COVER p65

users manual

Operating Instructions EB-G60UDigital Cellular PhoneBefore operating this equipment please read these instructions completely.
Important InformationiImportant InformationWe, Matsushita Mobile Communications Development of Europe Ltd,declare, that the EB-G60 conforms with the essential and other relevantrequirements of the directive 1999/5/EC. A declaration of conformity tothis effect can be found at http://www.panasonicmobile.com/support
Important InformationiiTHIS PANASONIC PHONE (MODEL EB-G60U) MEETS THE EUREQUIREMENTS FOR EXPOSURE TO RADIO WAVES.Your mobile phone is a radio transmitter and receiver. It is designed andmanufactured not to exceed the limits for exposure to radio-frequency(RF) energy recommended by The Council of the European Union. Theselimits are part of comprehensive guidelines and establish permitted levelsof RF energy for the general population. The guidelines were developed byindependent scientific organisations through periodic and thorough evalu-ation of scientific studies. The limits include a substantial safety margindesigned to assure the safety of all persons, regardless of age and health.The exposure standard for mobile phones employs a unit of measure-ment known as the Specific Absorption Rate, or SAR. The SAR limit rec-ommended by The Council of the European Union is 1.6 W/kg.* Testsfor SAR have been conducted using standard operating positions withthe phone transmitting at its highest certified power level in all testedfrequency bands. Although the SAR is determined at the highest certifiedpower level, the actual SAR level of the phone while operating can bewell below the maximum value. This is because the phone is designed tooperate at multiple power levels so as to use only the power required toreach the network. In general, the closer you are to a base station antenna,the lower the power output.Before a phone model is available for sale to the public, compliance withthe European R&TTE directive must be shown. This directive includes asone essential requirement the protection of the health and the safety forthe user and any other person. The SAR value for this model phone,when tested for use at the ear, for compliance against the standardwas 1.0 W/kg averaged over a 10g mass. While there may be differ-ences between the SAR levels of various phones and at various positions,they all meet the EU requirements for RF exposure.* The SAR limit for mobile phones used by the public is 1.6 watts/kilogram (W/kg) averaged over ten grams of tissue. The limitincorporates a substantial margin of safety to give additionalprotection for the public and to account for any variations inmeasurements. SAR values may vary depending on national re-porting requirements and the network band.
Important InformationiiiFCC RF Exposure Requirements: For body-wornoperation, this phone has been tested and meets theFCC RF exposure guidelines when used with COMPALaccessories supplied or designated for this product.Use of other accessories may not ensure compliancewith FCC RF exposure guidelines.SAR standard limit is 1.6 W/kgRF exposure FCCTests for SAR are conducted using standard operating positionsspecified by the FCC with the phone transmitting at its highestcertified power level in all tested frequency bands. Although theSAR is determined at the highest certified power level, the actualSAR level of the phone while operation can be well below themaximum value. This is because the phone is designed to operateat multiple power levels so as to use only the power required toreach the network. In general, the closer you are to a wirelessbase station antenna, the lower the power output.Before a phone model is available for sale to the public, it mustbe tested and certified to the FCC that it does not exceed thelimit established by the government-adopted requirement forsafe exposure. The tests are performed in positions andlocations (e.g., at the ear and worn on the body) as required bythe FCC for each model. (Body-worn measurements may differamong phone models,depending upon available accessories and FCCrequirements). While there may be differences between the SARlevels of various phones and at various positions, they all meet thegovernment requirement for safe exposure.
Important InformationivFor body worn operation, to maintain compliance with FCC RFexposure guidelines, use only accessories that contain no metal-lic components and provide a separation distance of 15mm (0.6inches) to the body. Use of other accessories may violate FCCRF exposure guidelines and should be avoided.Health and Safety Information FCCExposure to Radio Frequency (RF) SignalsYour wireless phone is a radio transmitter and receiver. It isdesigned and manufactured not to exceed the emission limits forexposure to radio frequency (RF) energy set by the Federal Com-munications Commission of the U.S. Government. These limits arepart of comprehensive guidelines and establish permitted levelsof RF energy for the general population. The guidelines are basedon the safety standards previously set by both U.S. and interna-tional standards bodies:This EUT has been shown to be capable of compliance for local-ized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measure-ment procedures specified in FCC/OET Bulletin 65 Supplement C(2001) and IEEE Std. 1528-200X (Draft 6.5, January 2002).Ministry of Health (Canada), Safety Code 6. The standards in-clude a substantial safety margin designed to assure the safetyof all persons, regardless of age and health. The exposure stan-dard for wireless mobile phones employs a unit of measurementknown as the Specific Absorption Rate, or SAR. The SAR limit setby the FCC is 1.6W/kg *.
Important Informationv* In the U.S. and Canada, the SAR limit for mobile phones used bythe public is 1.6 watts/kg (W/kg) averaged over one gram oftissue. The standard incorporates a substantial margin of safetyto give additional protection for the public and to account for anyvariations in.Safety ConsiderationsThe following information should be read and understood as it pro-vides details which will enable you to operate your phone in a mannerwhich is both safe to you and your environment, and conforms to anylegal requirements regarding the use of cellular phones.This equipment should only be charged with approved charg-ing equipment. Other usage will invalidate any approval givento this apparatus and may be dangerous. The use of approvedcharging equipment is recommended to ensure optimum per-formance and avoid damage to your phone. Ensure the voltagerating of the Fast Travel Charger is compatible with the area ofuse when travelling abroad.A Fast Travel Charger is supplied with the Main Kit. Other rec-ommended equipment for charging - Car Charger.Switch off your cellular phone when in an aircraft. The use ofcellular phones in an aircraft may be dangerous to the opera-tion of the aircraft, disrupt the cellular network and may beillegal. Failure to observe this instruction may lead to the sus-pension or denial of cellular phone services to the offender, orlegal action or both.Do not incinerate or dispose of the battery as ordinary rubbish.The battery must be disposed of in accordance with local legis-lation and may be recycled.
Important InformationviIt is advised not to use the equipment at a refuelling point. Us-ers are reminded to observe restrictions on the use of radioequipment in fuel depots, chemical plants or where blastingoperations are in progress. Never expose the battery to ex-treme temperatures (in excess of 60°C).It is imperative that the driver exercises proper control of thevehicle at all times. Do not hold a phone while you are driving;find a safe place to stop first. Do not speak into a Handsfreemicrophone if it will take your mind off the road. Always ac-quaint yourself thoroughly with restrictions concerning the useof cellular phones within the area you are driving and observethem at all times.Care must be taken when using the phone in close proximity topersonal medical devices, such as pacemakers and hearing aids.For most efficient use hold the phone as you would any normalphone. Your G60 cellular phone is fitted with an internalantenna, located in the upper portion of the phone, back of thedisplay screen. To avoid deterioration of signal quality or an-tenna performance, do not touch or “cup” the antenna areawhile the phone is switched on.Unauthorized modifications or attachments may damage thephone and violate applicable regulations. The use of an unap-proved modification or attachment may result in the invalida-tion of your guarantee – this does not affect your statutory rights.This Panasonic mobile phone is designed, manufactured andtested to ensure that it complies with the specifications cover-ing RF exposure guidelines applicable at the time of manufacture,in accordance with EU, USA FCC, and Australian ACAregulations.Please refer to our website for latest information/standardscompliance in your country/region of use.http://www.panasonicmobile.com/health.html
Care and MaintenanceviiCare and MaintenancePressing any of the keys may produce a loud tone. Avoid hold-ing the phone close to the ear while pressing the keys.Extreme temperatures may have a temporary effect on theoperation of your phone. This is normal and does not indicate afault.Do not modify or disassemble the equipment. There are nouser serviceable parts.Do not subject the equipment to excessive vibration or shock.Avoid contact with liquids. If the equipment becomes wet im-mediately remove the power and contact your dealer.Do not leave the equipment in direct sunlight or a humid, dustyor hot area.Keep metallic items that may accidentally touch the terminalsaway from the equipment.Always charge the battery in a well ventilated area, not in di-rect sunlight, between +5°C and +35°C. It is not possible torecharge the battery if it is outside this temperature range.When connecting the phone to an external source, read theoperating instructions of the equipment for the correct con-nection and safety precautions. Ensure the phone is compatiblewith the product it is being connected to.When disposing of any packing materials or old equipment checkwith your local authorities for information on recycling.
Quick ReferenceviiiQuick ReferencePress to select Direction which the user can move around the displayscreen using the Navigation keyMenu Representation of screen menu optionSecondary SoftkeyNegative soft key/Back-key-Numeric key padsAnswer a call or call a dialled numberPress to end a call or return to Idle screen.Press and hold to switch the phone on or off.Indicates that a function is SIM DependentIndicates that a function is Network Dependent
ixContentsImportant Information ............................................................................................. iSafety Considerations ....................................................................................... iiiCare and Maintenance ............................................................................................. vQuick Reference ...................................................................................................... viGetting to Know Your Phone .................................................................................. xLocation of Controls ......................................................................................... xGetting Started ....................................................................................................... 1Fitting the SIM ................................................................................................... 2Removing the SIM ............................................................................................. 2Fitting the Battery .............................................................................................. 3Removing the Battery ........................................................................................ 3Charging the Battery ......................................................................................... 4Operation of Battery Level Indicator ................................................................. 5Low Battery Warning ........................................................................................ 5Fitting Image-In ................................................................................................. 5The Display ....................................................................................................... 6Menu System Overview .................................................................................... 7Selecting a Function ........................................................................................... 8Basic Operation ..................................................................................................... 10Switching On & Off ......................................................................................... 10Making a Call ................................................................................................... 10International Dialling ........................................................................................ 11Emergency Calls .............................................................................................. 11Ending a Call ................................................................................................... 11Answering a Call ............................................................................................. 11Caller Identification ......................................................................................... 12Volume Control .............................................................................................. 12Locking the Phone ........................................................................................... 12Using the PIN .................................................................................................. 13Setting Ring Volume ........................................................................................ 14Setting Quiet Mode ......................................................................................... 14Phonebook ............................................................................................................. 15Browsing Phonebook ...................................................................................... 16Retrieving a Number ....................................................................................... 16Speed Dialling .................................................................................................. 17Editing Phonebook Entries .............................................................................. 18Synchronizing Phonebooks .............................................................................. 19Review the Phonebook Status ......................................................................... 19Grouping Phonebook Entries .......................................................................... 20Info Dial and Service Dial ................................................................................ 22My Numbers .......................................................................................................... 23Personalising Your Phone ...................................................................................... 24Changing the Language .................................................................................... 24Add a Start-up Greeting .................................................................................. 24Idle Screen Image ............................................................................................ 25Changing Screen Saver Image .......................................................................... 26
xTurning Screen Saver On & Off ....................................................................... 26Colour Themes ............................................................................................... 27Changing Sound Profiles .................................................................................. 27Editing Sound Profiles ...................................................................................... 28Download Data ( ) ........................................................................................ 29Media Folders .................................................................................................. 29Composing a Melody ...................................................................................... 30Setting the Backlight Time ............................................................................... 31Contrast .......................................................................................................... 31Operator Notice ............................................................................................. 32Restoring the Default Phone Settings .............................................................. 32Phone Security ...................................................................................................... 33Enabling Key Guard ......................................................................................... 34Disabling Key Guard ........................................................................................ 34Changing the Security Codes .......................................................................... 35Restricting Calls ............................................................................................... 35Applications ........................................................................................................... 37Clock .............................................................................................................. 37Setting the Time .............................................................................................. 37Setting the Alarm ............................................................................................. 38Muting the Alarm ............................................................................................ 39Setting a Power On / Off Time ........................................................................ 39Calculator ........................................................................................................ 40Messaging ............................................................................................................... 41SMS/EMS: Setting up the Phone ...................................................................... 42Creating a Text Message .................................................................................. 44Concatenated messages .................................................................................. 46Receiving Text Messages .................................................................................. 46Responding to Text Messages .......................................................................... 47Chat SMS ........................................................................................................ 48MMS: Setting Up the Phone ............................................................................ 49MMS Configuration ......................................................................................... 50Creating an MMS Message .............................................................................. 51Managing Message Lists ................................................................................... 53Cell Broadcasts ............................................................................................... 54Call Information ..................................................................................................... 56Recent Numbers ............................................................................................. 56Call Duration ................................................................................................... 57GPRS Call Duration ......................................................................................... 58Call Charges .................................................................................................... 58Setting the Unit Price ...................................................................................... 59Setting the Maximum Unit Level ..................................................................... 59Call Identification ............................................................................................. 60Advanced Operation ............................................................................................. 61Diverting Calls ................................................................................................. 61Holding Calls and Call Waiting ......................................................................... 62Making a Second Call ...................................................................................... 62Receiving a Second Call ................................................................................... 63Accepting a Second Call .................................................................................. 63Rejecting a Second Call ................................................................................... 63Ending Current Call to Receive Another ......................................................... 63
xiOperation During Two Calls ............................................................................ 63Call Transfer .................................................................................................... 64Multi-party Calls .............................................................................................. 64Changing to a New Network .......................................................................... 66Schedule ................................................................................................................. 67Creating a Reminder ....................................................................................... 67Viewing & Editing Reminders .......................................................................... 68Games ..................................................................................................................... 69Embedded Games ........................................................................................... 69Downloadable Games ..................................................................................... 69Game Settings ................................................................................................. 70Managing Multimedia Files .................................................................................... 71Displaying Pictures and Animations ................................................................. 71Playing Melodies .............................................................................................. 72Renaming Files ................................................................................................. 72Creating Mail from Files .................................................................................. 73Deleting Files ................................................................................................... 73Checking File Properties ................................................................................. 73Checking Folder Properties ............................................................................. 74WAP Browser ........................................................................................................ 75Browser Settings ............................................................................................. 75Activating the Browser .................................................................................... 78Navigating Content ......................................................................................... 78Browser Menu ................................................................................................ 79Using Bookmarks ............................................................................................ 81Deactivating the Browser ................................................................................ 82Additional Features ............................................................................................... 83Voice Memo .................................................................................................... 83DTMF Tones ................................................................................................... 85Note Pad ......................................................................................................... 85Desktop Handsfree ......................................................................................... 86Auto Answer ................................................................................................... 86Camera Accessory ................................................................................................. 87Taking a picture ............................................................................................... 87Camera Accessory ................................................................................................. 87Camera Options ............................................................................................. 88Text Entry ............................................................................................................... 89T9® Text Input ................................................................................................. 90Other Text Modes ........................................................................................... 90Editing Text ..................................................................................................... 90Trouble Shooting ................................................................................................... 91Important Error Messages ............................................................................... 93Glossary of Terms ................................................................................................... 95Specifications ......................................................................................................... 97Phone (Including Battery) ................................................................................ 97EU Warranty .......................................................................................................... 98Personal Settings ................................................................................................. 104Menu Structure ................................................................................................... 105Note ..................................................................................................................... 106Licensing ............................................................................................................... 107
Getting to Know Your PhonexiiGetting to Know Your PhoneLocation of ControlsEarpieceDisplaySecondary SoftkeyCall KeyMicrophone SocketMicrophonePrimary SoftkeyNegative SoftkeyPower On/Off,Back-KeyKeypad
Getting Started Thank you for purchasing this Panasonic digital cellular phone. This phone is designed to operate on GSM networks – GSM850, GSM1900. It also supports GPRS for packet data connections. Ensure the battery is fully charged before use. Before operating this phone please read the Important Information section - see page i. These operating instructions detail use of the equipment contained in the Main Kit. Some services detailed are network dependent or may only be available on a subscription basis. Some functions are SIM dependent. For more information contact your Service Provider.
Getting Started2Fitting the SIMThe SIM is inserted into the back of the phone underneath the battery.1 Remove the battery - see Removing the Battery page 3.2 Unlock the SIM retainer by sliding it up towards the top of thephone (X).3 Gently raise the SIM retainer (Y).4 Place the SIM into its recess, ensuring the bevelled corner is posi-tioned in the top right corner (Z).5 Move the SIM retainer back into position ([) and secure by slidingdownwards (\). The SIM retainer is properly locked when it hasclicked into position.Note: Ensure the SIM retainer is properly locked into position. Fail-ure to do so will inhibit the fitting of the battery and the battery cover.Removing the SIM1 Unlock the SIM retainer by gently pushing towards the top of thephone (X).2 Gently raise the SIM retainer (Y) and remove the SIM (Z). Returnthe SIM retainer to its flat position ([) and ensure it is correctlylocked (\) before refitting the battery and battery cover.
Getting Started3Fitting the Battery1 Insert the battery bottom first so that the connectors touch thoseon the phone.2 Press gently downwards and simultaneously slot the top of thebattery into place.Removing the BatteryEnsure the phone is switched off and the charger is disconnected fromthe phone before removing the battery. Lever the battery out from thenotch in the top edge.
Getting Started4Charging the BatteryConnecting the Fast Travel ChargerThe battery must be fitted in the phone before the charger isconnected.Insert the connector into the base of thephone, ensuring the arrow on the connec-tor is to the front of the phone.Note: DO NOT force the connector as this may damage the phoneand /or the charger.Connect the charger to the mains power supply. The battery level indi-cator will scroll right to left during charging.Disconnecting the Fast Travel ChargerWhen charging is complete, disconnect thecharger from the mains power supply.
Getting Started5Operation of Battery Level IndicatorWhile charging Charging completePhone onPhone off Charging indicator offIt is recommended that the battery is fully discharged between chargesto maintain optimum battery life and performance.Low Battery WarningWhen the battery power is low, the battery indicator will be colouredred. If battery power is critically low, a warning tone will sound, and aBATTERY IS EMPTY! message will be displayed. If this occurs duringconversation, finish your call immediately. The power will automaticallyshut off after the warning tone. Fully recharge the battery. See Chargingthe Battery, page 4. Calls can be made and received while the phone ischarging.Fitting Image-InCustomised image cards may be fitted to the rear of the phone, behindthe transparent rear cover. An Image-In template is included with yourphone.II
Getting Started6The DisplayFollowing some operations the display will automatically clear after threeseconds or after pressing any key.Status IconsThe status icons are displayed according to the currently activatedfunctions. The Antenna, Signal and Battery icons are displayed when thehandset is switched on and connected to a network.Indicates Battery Level: (green)- full, (red) - low batteryDisplayed when you are registered to a non-home network -RoamingWhite icon indicates a new message has been received. Red iconindicates the message store is full.Indicates Alarm is setIndicates Call Divert is enabledVoicemail activatedIndicates Ringer is enabled ( = vibration mode / = vibrate + ring / = flashing mode)Indicates GPRS service availableIndicates it is possible to make emergency calls onlyGSM signal strength: - weak signal, - strong signal
Getting Started7Menu System OverviewThe menu system provides the means for accessing all the functions thatdo not have their own dedicated buttons on the keypad. Each menucontains a list of options. Some menus have further submenus.The submenus and functions are selected using the five-way Navigationkey ().The diagram below gives an overview of the contents of the menus tohelp you find your away around. This is just a summary. Keep reading todiscover everything your phone has to offer. My PhoneSet interface languageChoose ring tones and alertmethodCustomize your colour schemeChange idle screen picture andscreen saver PhonebookCreate and manage yourphonebookGroup friends and contacts tomake their calls easy to identify andtheir numbers easy to findPut your closest friends and con-tacts on your Hot Key Dial List forinstant diallingSynchronise your SIM and MobilePhonebooks Phone OptionAccess security features and callservicesSet up call diversionIf an STK SIM card is fitted, thismenu gives access to operator-spe-cific functions. The Phone Optionmenu can also be accessed fromthe Accessories menu. GamesAccess preinstalled and down-loaded games. Availability ofdownloadable games is networkdependent BrowserAccess and surf the InternetConfigure browser settings Key GuardGuard your phone against acciden-tal use MessagesCompose and send text and multimedia messagesAdd sounds and images to mes-sages SchedulerAdd and view events in your personalschedule ApplicationsDownload games (depending onyour network)Record and listen to voice memosMake use of built-in calculator,write your own ring tones andchange clock settings
Getting Started8Selecting a FunctionUse and to move between the icons on the screen. When a par-ticular menu is highlighted, pressing displays a submenu. From anysubmenu, use until the required item is highlighted. Press to select.For example, to change Sound Setting (to switch ringtone):1 From the Idle screen, press to display the main menu2 Use to highlight the My Phone menu3 Press to enter the menu4 Use once to highlight the Sound Settings menu and press to enter5 Use to highlight the mode you wish to set and press to enter6 Press to activate your chosen modeFollowing some operations the display will automatically clear after threeseconds. If this is not the case press to return to the idle screen.
Getting Started9Shortcuts ( )When familiar with the layout of the menu, use the keypad to enter theMenu Number. This will allow the user to obtain the required functionwithout having to navigate through the display menus. To change SoundSetting, for example, from the Idle screen, press to display the mainmenu, then press 12 to enter the Sound Settings submenu.
Basic Operation10Basic OperationThis section contains the information you need for the most essentialphone operations, including:DHow to switch on and offDHow to make and end a callDHow to answer a callDHow to change earpiece volumeDHow to lock the phoneDHow to protect the phone using a PINDHow to change ring volumeSwitching On & OffTo turn the phone on or off, press and hold down .When the phone is switched on a greeting will be displayed and then thephone will go into Idle. The Greeting can be set in the My Phone >Display Settings > Greeting menu. See Adding a Start-up Greeting, page24.Making a CallEnsure that the phone is switched on, the network operator logo is dis-played and the signal strength meter shows network coverage is avail-able in the current area.1 Enter area code and phone number2 Press
Basic Operation11International DiallingThe international code for the destination country / region should beentered , followed by the area code and phone number.To enter the international code, select an international line by pressing until + appears, then enter the country / region code (e.g. 44 for theUK; 81 for Japan).Note: Many countries / regions include an initial “0” in the area code.This should, in most cases, be omitted when dialling internationalnumbers. If you have difficulties making international calls, contactyour Service Provider.Emergency CallsTo make an emergency call, the antenna symbol ( ) must be present.To made an emergency call, enter 112 then press Ending a CallTo end a call, press Answering a CallTo receive a call, the phone must be switchedon and the signal strength meter mustbe displayed.Press any key except to answer a callPress to reject a callNote: If a call is not answered or is rejected, the number of incomingcalls missed will be displayed. Press any key to clear the display.
Basic Operation12Caller IdentificationThe caller’s phone number, and name if stored in the Phonebook, will bedisplayed during an incoming call.Note: Caller Identification may not always be available.Volume ControlThe volume level may be adjusted during a call:Use to decrease the volume; use to increase the volumeNote: Volume control for the Personal Handsfree accessory is ad-justed in the same manner.Locking the PhoneWith the Phone Lock enabled you will be restricted to answering incom-ing calls only. The Phone Lock Code is factory set to 0000.1 From Idle press and select (Applications >) Phone Option> Security > Phone Lock. Press 2 From the submenu select Status3 Select On and press 4 Enter the 4-digit code and press The lock icon will be displayed in the primary selection area.Unlocking the PhoneEnter your Lock Code. The lock icon will be replaced by OK. Press to confirm.As long as the Phone Lock is enabled, whenever you turn on the phone,the Lock Code will need to be re-entered to activate the code.
Basic Operation13Changing Phone Lock CodeYou should change your phone lock code to a 4-digit number of yourown choice.1 From Idle press and select (Applications >) Phone Option> Security > Phone Lock. Press 2 From the submenu select Change Code and press 3 Enter the Old Unlock Code and press 4 Enter a New Unlock Code and press 5 Re-enter the New Unlock Code to confirm. Press to com-plete the change.Disabling Phone LockThe phone must be unlocked before the phone lock can be disabled.1 From Idle press , select (Applications >) Phone Option >Security > Phone Lock. Press 2 From the submenu select Status and press 3 Select Off and press 4 Enter the 4-digit code and press Using the PINThe PIN protects your SIM against unauthorized use. If you enable thePIN, every time the phone is turned on you will be prompted to enterthe PIN.PIN2 controls security for the Fixed Dial Store, Call Charge meteringand Barred Dial list.If either PIN/PIN2 is entered incorrectly 3 times the phone will be lockedand the user will need to enter the PUK/PUK2 code.Contact your service provider for the PUK/PUK2 code.Note: If the PUK/PUK2 code is entered incorrectly 10 times, theSIM will cease to operate. All information stored in the SIM will belost and the SIM will need to be replaced. Contact your service pro-vider for more details.
Basic Operation14Enabling/Disabling the PIN1 From Idle press , select (Applications >) Phone Option >Security > PIN. Press 2 Select Status3 Select On or Off from the submenu4 You will be prompted to enter the PIN. On first use, enter PIN ofyour choice (Between 4 and 8 digits) and press Setting Ring VolumeWith the G60U, you can set up your phone in different modes depend-ing on your environment, allowing different ring tones and volumes indifferent situations.To change ring volume for any sound profile:1 From Idle press , select My Phone > Sound Settings2 Select the profile you wish to adjust then select Edit > Ring Volume3 Use to set the volume levelTurn to Personalising Your Phone, page 24, for more information on set-ting different ring modes.Setting Quiet ModeYou may wish to set at least one mode as a silent mode. To do this, setCall Alert Method for that mode to Vibration:1 From Idle press , select My Phone > Sound Settings2 Select the profile you wish to adjust then select Edit > In-CallAlerting3 Select VibrationNote: Once you have set the ring volume / type for a mode, you canmake that the active mode at any time by selecting My Phone >Sound Settings, choosing the desired mode then choosing Activate.Turn to Personalising Your Phone, page 24, for more information onsetting different ring modes.
Phonebook15PhonebookPhone numbers can be stored in two locations:In the SIM Phonebook ( ), where the number of entries andlengths of names and numbers are SIM dependent.In the Mobile Phonebook, where phonebook entries can begrouped together and additional data can be stored with numbers.This phonebook is retained even if you change your SIM.This section tells you all you need to know about:DManaging your PhonebooksDFinding entries in your PhonebooksDSpeed DiallingDGrouping Phonebook entries to make calls easier to identify andnumbers easier to findNote: See Text Entry, page 84, for information on text entry meth-ods available for making Phonebook entries.To Store a Number in the SIM Phonebook1 From Idle enter the phone numberand press 2 From the menu select SIMPhonebook and press 3 Select Name, press and enteridentifying name. Press 4 Select No. and confirm the phonenumber. Press 5 Press to save
Phonebook16To Store a Number in the Mobile Phonebook1 From Idle enter the phone numberand press 2 From the menu select MobilePhonebook and press 3 Select Name, press and enteridentifying name. Press 4 Select No. and confirm the phonenumber. Press 5 Select and enter Email address.Press (optional)6 Select a Group - see GroupingPhonebook Entries - into which toplace the entry (optional)7 Enter a Hot Key Dial number from to (optional)Browsing PhonebookYou can browse both Phonebooks simultaneously by name. Use the di-rection keys to move through the contact list or press a lettered key toskip to the first entry starting with that letter.1 From Idle press 2 Use (or the lettered keys) to select the entry you wish to browseRetrieving a Number1 Browse to locate and highlight the desired number in thePhonebooks2 Press to dial the number
Phonebook17Speed DiallingLast Number CalledFrom Idle press twiceHot Key DiallingFrom Idle press and hold the appropriate hot key number.To view your hot key dial list, from Idle press , select Phonebook >Hot Key Dial ListAssigning Hot KeysTo assign a hot key to a frequently used number:1 Browse to locate and highlight the desired number in thePhonebooks. Press 2 Select Edit > Hot Key Dial3 Enter the Hot Key dial number (from to ) for this entryNote: If the Hot Key number is already taken, an ID Used messagewill appear.Note: Some Hot Key Phone numbers may be reserved by the Ser-vice Provider. For example the first three Hot Key Phone numbersmay be linked to Service Dial ( ).Info Numbers or Service DialYour Service Provider may program some special phone numbers intoyour SIM ( ). It is not possible to modify these:1 Press and hold 2 Use to browse through the Service Dial list of phone numbers
Phonebook18Editing Phonebook EntriesIt is possible to view Entry Details, Edit, Delete, Create or CopyEntry information from the Phonebooks. To access any of these functions:With a phone number or name highlighted:1 Press to select the submenu2 Use to cycle through EntryDetails, Edit, Delete, Create orCopy Entry3 Press to select an optionEntry DetailsDisplays each element of the selected Phonebook entry: Name, numberand location of entry (SIM or phone). Press to edit the name or number.EditDisplays the entry allowing you to make changes as required. Press tosave any changes and when you have completed editing.DeleteDeletes the entry from the Phonebook. Press to confirm deletion.CreateCreates a new entry in the Phonebooks. Select SIM Phonebook or Mo-bile Phonebook as entry location.Copy EntryUse to copy an entry between Phonebooks.
Phonebook19Synchronizing PhonebooksKeep your SIM and Mobile Phonebooks in step by synchronizing theircontents regularly. You can copy individual entries between phonebooks(see Editing Phonebook Entries, page 18) or simply copy the entire con-tents of one phonebook into the other. To do this:1 From Idle, press and selectPhonebook > Copy Entries. Press2 Use to either copies the entriesof SIM to Phone or Phone to SIM.Press to selectReview the Phonebook StatusThe Review function in the Phonebook menu shows how many locationsare available in the two Phonebooks.1 From Idle press , select Phonebook > Review2 Use to select SIM Phonebook or Mobile Phonebook and pressA summary of the selected Phonebook will be displayed.
Phonebook20Grouping Phonebook EntriesGroups are used to collect together types of Phonebook entries, forexample business and personal. Each group can be suitably titled for quickaccess to the entries contained within.An alert profile can be attributed to groups (or individual phone numbers)allowing incoming call alerts to be tailored to indicate the type of caller.Adding a Number to a GroupYou can store numbers in up to 10 groups. To add a number from yourMobile Phonebook to a group:1 From Idle press 2 Use (or the lettered keys) to se-lect the entry you wish to add. Press to reveal the submenu3 Select Edit. If the entry is stored inthe Mobile Phonebook, its grouplocation will be shown (Group:None is displayed if the numberdoes not belong to a group)4 Select Group and press 5 Scroll through the list of availablegroups and select whichever is ap-propriate
Phonebook21Retrieving a Number from a Group1 From Idle press , select Phonebook > Group Setting2 Use to select the group3 Press to enter the submenu and press again to View thecontents of the group3 Use to select the desired entry4 Press to dial the number or to edit the details of the entryRetitling Group Names1 From Idle press , selectPhonebook > Group Setting2 Use to select the group3 Press to enter the submenu, se-lect Edit and press again4 Name is highlighted at the top of thesubmenu. Press once to startediting the name and a second timeto confirmSetting Group Ring TonesEach group can be given a distinct Alert Profile so that incoming calls arerecognizable from their ring tone. To set a group’s ring tone:1 From Idle press , select Phonebook > Group Setting2 Use to select the group, select Edit and press again3 Select Ring and press again4 Scroll through and select the desired ring tone. Press to select
Phonebook22Setting Group Call IconsYou can also attach to a group an image that will display when a call isreceived. To add an image:1 From Idle press , select Phonebook > Group Setting2 Use to select the group, select Edit and press again3 Select Icon and press again4 Scroll through and select the desired icon. Press to selectInfo Dial and Service Dial ( )The Info Dial and Service Dial items on the Phonebook menu providespace for operators to include useful numbers. If your operator does notoffer these services, these spaces will be blank.
My Numbers23My NumbersMy Numbers is a convenient part of the Phonebook where your ownvoice, fax and data phone numbers can be stored and viewed ().Adding Numbers1 From Idle press and select Phonebook > My Numbers. Press2 Select an empty entry from the list of numbers. Press 3 Select Edit and press 4 Select and enter the Name (see Text Entry, page 84) and press to saveNote: If using T9® text input (recommended) then move beforemoving otherwise an alternative word will be selected.5 Select and enter the phone No. and press twiceViewing Stored Numbers1 From Idle press , select Phonebook > My Numbers. Press2 If more than one number is available then use to cycle throughthe listed numbers. Press to select3 Select Entry Details to view entry. Press 4 Press again if you wish to edit the details
Personalising Your Phone24Personalising Your PhoneThis section contains all the information you need to adapt your phoneto your needs and personality. You can:DChange the menu languageDAdd a message to show at start-upDTry a new idle screen imageDChange your screen saver imageDUse a different colour themeDSwitch between and edit different user profilesDMake use of downloaded ring tones and imagesDCompose your own ring toneDChange the backlight and contrast settings...and more!Changing the LanguageIt is possible to change the language the phone uses for display messagesand /or text entry ( ) .1 From Idle, press , select My Phone > Language2 Use to select the Language you wish to use3 Press to select the desired languageAdd a Start-up GreetingA personalised greeting can be programmed for when the phone isswitched on.1 From Idle press , select MyPhone > Display Settings >Greeting. Press 2 Use the text entry facility to add agreeting (see Text Entry, page 84).Press to confirm
Personalising Your Phone25Idle Screen ImageThe idle screen can be changed to a preinstalled or downloaded image.To choose an image for the Idle screen:1 From Idle press , select My Phone > Display Settings >Idle Screen. Press 2 Several images are preinstalled onyour phone in the Fixed Datafolder. Downloaded images arestored in the User Data folder.Navigate to the appropriate folderand use to select the required im-age3 Use to view image. Press any keyto return4 Highlight the image you want andpress to select
Personalising Your Phone26Changing Screen Saver ImageThe screen saver can also be changed to a preinstalled or downloadedimage.To choose an image for the screen saver:1 From Idle press , select My Phone > Display Settings >Screen Saver. Press 2 Several images are preinstalled onyour phone in the Fixed Datafolder. Downloaded images arestored in the User Data folder.Navigate to the appropriate folderand use to select the required im-age3 Use to view image. Press any keyto return4 Highlight the image you want andpress to selectTurning Screen Saver On & OffSelect My Phone > Display Settings > Screen Saver > Setting toturn the screen saver function On or Off, and to set the Idle Time (from1 to 5 minutes) before the screen saver is launched.
Personalising Your Phone27Colour ThemesColour Themes provide alternative combinations of colours for the back-ground and text.To use or change a Colour Theme:1 From Idle press and select My Phone > Display Settings >Colour Themes2 Use to select the required Colour Theme. Press Changing Sound ProfilesYou can switch between six sound profiles on your phone each with adistinct combination of alert method, ring tone and type etc.Profiles are set up for use in different environments - for instance youmight want to create a silent profile, a discreet profile with ring toneappropriate for formal occasions and a party profile for loud environments.Within each profile, distinct melodies can be set as incoming call andmessage alerts.Note: Ring tones can also be used to identify incoming calls frommembers of groups. If a group member calls, the Group ring tonewill sound, not the Sound Profile ring tone.To activate a Sound Profile:1 From Idle press select MyPhone > Sound Settings2 Select the Profile you wish to acti-vate from the list. Press 3 Press again to activate that Pro-file
Personalising Your Phone28Editing Sound ProfilesTo edit a Profile:1 From Idle press and select MyPhone > Sound Settings2 Select the Profile you wish to editfrom the list. Press 3 Use to select Edit. Press For each profile, you can set and edit the following:Ring Type Select a ring tone from the lists of preinstalledmelodies (Fixed Data) or downloaded melo-dies / ring tones that you have written (UserData). Press to preview the ringtone and to confirm ring tone selectionIn-Call Alerting Select from Ringer / Vibration / Vibrationand Ring / Flashing / OffRing Pattern Select either Continuous or OnceRing Volume Use to set the volume level. To mute volume,use the In-call Alerting submenuMessage Type Select the alert type for incoming message(Ringer / Vibrate and Ring / Off)Message Tone Select a ring tone from the lists of preinstalledmelodies (Fixed Data) or downloaded melo-dies / ring tones that you have written (UserData). Press to preview the ringtone and to confirm ring tone selectionKeypad Tone Turn keypad tones On or OffWarning Tone Turn warning tones (which sound if an inap-propriate key stroke is made) On or Off
Personalising Your Phone29Download Data ( )The Panasonic G60U is able to use various downloaded data. The down-loaded data is stored in the Media Folder and can be acquired via MMS,EMS, SMS or WAP. Details of this service are available on our website.Availability of this service is dependant on your country/region, ornetwork.For further information visit:http://www.panasonicbox.comMedia FoldersThe Media Folder located at My Phone > Media Folder is the storagelocation for media files that have been downloaded from a third partysource and are saved in the handset. Some of these can be used as ringtones, Idle screen images or attachments to text messages. See Manag-ing Multimedia Files, page 69, for how to use these files.Note: It is only possible to attach EMS format Animations/PicturesAccess these files from the Media Folder menu to rename, delete or editthem. To select an item from the Media Folder:1 From Idle, press select My Phone > Media Folder and press2 Use to select the media type (either Picture, Animation orMelody)3 Use to select a filePress to view or play the selected file before making any changes tothe file.4 Press and use to select Rename, Delete or Delete All.Press
Personalising Your Phone30Composing a Melody1 From Idle, press , select Appli-cations > Edit Ringtone2 Press and then select New Tone.Using the table below as reference, enterthe notes, set the rhythm and octave foreach and add rests to generate yourcomposition.KeyNote CDE F GABKeyNote Rest Note Set Dotted SharpLength Octave Note3 Referring to the table above, use thekeys to to enter notes.4 The notes appear in the format 2C4as shown on the right.DThe first number (2) indicates thenote octave. The default value is 2.Press to change octave (rangefrom 1 to 3).DThe number of the right (4 in thefirst picture on the right) indicatesthe notes length. The default valueis 1/4. Press to change notelength (range from 1 to 1/32).DIn the second picture on the right,the octave has been left unchangedat 2 while the note length has beenshorted to 1/32.DIndicate dotted notes (i.e. notes extended in length) by pressing.DAdd sharp values to notes by pressing .DEnter rests by pressing .
Personalising Your Phone31Note: At any time during composing press to play back the cur-rent melody.5 When the composition is complete, press twice and enter thetitle. Press to save the name and to complete composing.Setting the Backlight TimeThe Backlight is illuminated when a key is pressed to make using yourphone easier. You may wish to reduce backlight time to increase thetime your phone will run between battery charges.1 From Idle, press , select My Phone > Display Settings >Backlight Time2 Use to cycle through the times available (Off / 10 seconds / 30seconds / 60 seconds)3 Press to select the desired timeContrastScreen contrast can be altered for viewing in different lighting conditions:1 From Idle, press , select MyPhone > Display Settings > Con-trast2 Use to set the desired contrastlevel3 Press to confirm selection
Personalising Your Phone32Operator NoticeOperator notices appear if the phone has been left idle to remind usershow to operate selected features. To enable and disable operator no-tices go to My Phone > Display Settings > Operator Notice andpress .Restoring the Default Phone SettingsAny personal settings can be swiftly returned to their factory default,with the exception of some features, such as the Phone Lock code andthe Language.1 From Idle, press , select MyPhone > Defaults2 When prompted Use DefaultSettings? press to confirm andrestore the settings
Phone Security33Phone SecurityYour phone has a number of security features that protect against unau-thorized use and enable the user to restrict access to certain functions.These include:DPhone LockDPIN ProtectionDKey GuardDCall BarringDFixed DialNote: For full details of the Phone Lock feature, turn to Locking thePhone, page 12.Note: For full details of PIN Protection, turn to Using the PIN, page13.It is recommended that all security codes are memorized. If it is neces-sary to make a note of any security codes, never write them in a way thatthey can be recognized by another person. If forgotten, contact yourdealer (for the Phone Lock Code) or Service Provider (for PIN and PIN2).
Phone Security34Enabling Key GuardThe Key Guard function is used to pre-vent any keys from being accidentallypressed, for instance when the phone isbeing carried.From Idle press twice to bring up theGuard Keypad? message and a third timeto confirm. The Key Guard icon ( ) willappear on the Idle screenWhen a call is received, Key Guard will be disabled temporarily, allowingthe user to press any key except to answer the call. Emergency callscan still be made - see Emergency Calls, page 11.Note: When making emergency calls with the “Key Guard” enabled,there will be no audible or visual indication that the number is beingdialledDisabling Key GuardPress once to bring up the FreeKeypad? message and a second time toconfirm.
Phone Security35Changing the Security Codes1 From Idle press and select (Applications >) Phone Option> Security2 Use to select Phone Lock, PINor PIN23 Use to select Change Code andpress 4 Enter the current code and press 5 Enter the new code and press 6 Verify the new code and press Restricting CallsCall BarringThe Call Bar function is used to restrictcertain outgoing and/or incoming calls. CallBarring is controlled by a security pass-word that is supplied by the Service Pro-vider (this password can be changed: seebelow). When updating or checking thestatus of Call Barring the phone must beregistered with a network. Different CallBar restrictions can be used for voice anddata calls. Any combination of call restric-tions can be set.1 From Idle press and select(Applications >) Phone Option >Security > Call Bar. Press 2 Use to select Bar Voice or BarData3 Follow the submenus to set the de-sired restrictions
Phone Security36Outgoing Calls Select from All Calls / International Calls /International Calls Except Home / OffIncoming Calls Select from Off / When Roaming / All CallsData Calls Select from All Calls / International Calls /International Calls Except Home / Off4 Enter Call Bar password and press Note: To change Call Barring password, go to (Applications >)Phone Option > Security > Change PasswordYou can change individual Call Barring settings following the instructionsabove or cancel all call barring settings by selecting (Applications >)Phone Option > Security > Cancel All.Fixed DialThe Fixed Dial Store is part of Phonebook (Phonebook > Fixed Dial),but with additional security.When the security feature Fixed Dial is enabled in the security submenuit is only possible to make calls with phone numbers that are in the FixedDial Store. When Fixed Dial is enabled any manually dialled phone num-bers must match a phone number in the Fixed Dial Store.To store, edit or delete a phone number in the Fixed Dial Store the FixedDial function must be enabled. With Fixed Dial enabled, all phone num-bers can be added, edited or deleted as normal, but you will be promptedfor PIN2.To enable Fixed Dial:1 From Idle press and select (Applications >) Phone Option> Security > Fixed Dial. Press 2 You will be prompted to enter SIM PIN2 before proceeding.
Applications37ApplicationsThis section introduces some of the applications you’ll find installed onyour phone. These include:DThe clockDAlarmsDAutomated power on and power offDThe calculatorClockYour phone incorporates a clock with date/time, an alarm and an auto-matic power on/off feature.Setting the Time1 From Idle press and select Ap-plications > Clock Function >Clock Set2 Press to select the time entry3 Use the numbered keys to enter thecorrect time (using the 24-hourclock) or use to adjust the timedisplayed. Move between the hourand minute fields using 4 When the time is entered correctly,press to confirm
Applications38Setting the AlarmUp to three separate alarms can be set. For each alarm, you can setdifferent schedules (e.g. daily / weekdays only) and alarm tones as well astimes.If the clock hasn’t been set, the user will be prompted to set it prior tosetting the alarm.To set an alarm1 From Idle press and select Ap-plications > Clock Function >Alarm Set. Press 2 Use to select the alarm to be set(By default the alarms are namedAlarm1, Alarm2 and Alarm3.These names can be changed -- seestep 7 below). Press 3 First set the alarm time. Press to enter Setting Time4 Use the numbered keys to enter the correct alarm time (using the24-hour clock) or use to adjust the time displayed. Move be-tween the hour and minute fields using Press when com-plete5 Use to highlight the desired sched-ule for the alarm and press toselect6 Select Melody and highlight and se-lect the desired alarm melody fromthe submenu. Press to confirm7 Select Rename and enter a namefor the alarm settingWhen the alarm has been set, and the clock is displayed, will bedisplayed when the phone is in Idle.Note : To disable an alarm setting, select Applications > ClockFunction > Alarm Set > [Alarm Name] > Cancel
Applications39Muting the AlarmWhen an alarm goes off, the chosen melody will sound and the displaywill flash with an alarm message. The alarm will sound for 30 seconds. Ifthe alarm is due during a call, it will activate a vibration alert.To end the alarm:Press any keyAdjusting the Alarm TimeTo adjust an alarm time follow the steps in Setting the Alarm, page 38.Setting a Power On / Off TimeThe phone can be set to turn itself on or off automatically at a specifiedtime using the Power On / Off feature. To set the Power On and Offschedule:1 From Idle press and select Ap-plications > Clock Function2 Select Power On Time or PowerOff Time. Press 3 Use the numbered keys to enter thecorrect Power On or Power Offtime or use to adjust the timedisplayed. Move between the hourand minute fields using Press when complete4 The Power On / Power Off setting can be applied once when theset time is next reached (Enable Once) or until cancelled (EnableAlways). Highlight the appropriate setting and press to selectis similar to that for setting the time on the clock. For either settingor adjusting the time needed to select Power On Time or PowerOff Time in the Clock Function menu
Applications40Caution: Ensure that the setting of the Alarm or Power On functionwill not contravene any regulations whereby it may automaticallypower on when in an aircraft or medical facility etc. - see ImportantInformation, page I.Note : To disable a Power On or Power Off setting select Applica-tions > Clock Function > Power On Time / Power Off Time >Time (ignore) > Disable.CalculatorThe four function calculator will enable the user to perform simple arith-metic calculations (addition/subtraction/multiplication and division).1 From Idle press and select Ap-plications > Calculator. Press 2 Enter a number (maximum 8 digits)and it will be displayed on the up-per right of the display. If a decimalpoint is required, press 3 Use to scroll through and selectthe arithmetic operation you wish toperform4 Enter a second number (maximum 8 digits). It will be displayednext to the operation symbol5 Press to complete the calculation
Messages41MessagingYour phone has various messaging features including SMS, MMS and EMS.SMS/EMS - Enter the recipient’s phone number to send text and images.MMS - Attach images and music to text messages.This chapter is a full introduction to messaging including:DSetting up your phone to enable SMS/EMS and MMS messagingDWriting text messagesDSending Quick NotesDAdding attachments to text messagesDReading incoming messagesDManaging messages in your Inbox and OutboxDChatting with SMS contactsDCreating multimedia messagesDReceiving message broadcasts on desired topics
Messages42SMS/EMS: Setting up the PhoneIt is possible to receive, display, edit and/or send text messages of up to459 characters (dependent upon the language being used) to mobilephones on your service provider’s network or any network that has aroaming agreement (dependent on the recipient’s phone parameters).Before a text message can be sent, you must enter the Message Centrenumber into Options (your Service Provider will supply the Message Cen-tre number). You should also select the protocol via which messages aresent, the storage time (lifetime) and pick a delivery confirmation setting.The Message Centre number may have been pre-programmed on theSIM.Setting the Message Centre NumberFrom Idle press , select Mes-sages > Options > SMS/EMS >Message Centre. Press Include the international dialling code in theMessage Centre number.LifetimeThe lifetime is the duration that your mes-sages are stored at the Message Centre.Delivery attempts will be repeated untilthe message has been delivered or theLifetime expires.From Idle press , select Mes-sages > Options > SMS/EMS >Lifetime. Press Select from 1 hour, 12 hours, 1 day, 1week or Maximum to set the time afterwhich messages are automatically deleted.
Messages43Messaging ProtocolFrom Idle press , select Mes-sages > Options > SMS/EMS >Protocol. Press Select the appropriate protocol for send-ing messages or maintain the Defaultsetting.Delivery Confirmation SettingFrom Idle press , select Mes-sages > Options > SMS/EMS >Report. Press Select Yes to enable delivery confirmationfor your messages, No to disable the func-tion and Ask to prompt the message re-cipient to acknowledge receipt.
Messages44Creating a Text Message1 From Idle press , select Mes-sages > Create > SMS/EMS.Press 2 Write text message. To change textinput method (displayed in lower leftcorner of screen), press . See TextEntry, page 84, for details.Use to navigate through the mes-sage and position the cursor to addtextUse to delete the character tothe left of the cursorPress to cancel the message3 Press when you have finishedcomposing the message4 The submenu that appears gives theoptions of OK / Insert Media /User Msgs / Add Sig. For informa-tion on adding attachments, see TextMessage Attachments on the nextpage5 Either browse the Phonebook to se-lect the number to send the mes-sage to, or choose OK and enter thedestination phone number. Press 6 You will be asked Send Message Now?Press
Messages457 As the message is sent the sendingmessage animation will display.8 If Delivery Confirmation is enabled(see previous section) and the mes-sage is transmitted successfully, SendMessage Success will appear.Sending Quick Note MessagesYour phone comes with several common message expressionspreinstalled. To send a Quick Note:1 From Idle press , select Messages > Create > SMS/EMS.Press 2 Instead of writing the message content, press and select UserMessages. A list of the saved Quick Notes will be displayed.3 Select the desired Quick Note and press .4 Enter the phone number and send in the same way as for a stan-dard text message.Note: View your Quick Notes at any time by going to My Phone >Quick Note. You can also use this menu to compose new QuickNotes.
Messages46Text AttachmentsWhen creating a text message, it is possible to include attachments(copyright permitting).To include an attachment:1 Follow the instructions above to write the text message then press. When the OK / Insert Media / User Msgs / Select submenu ap-pears (see step 4 above), select Insert Media.2 Use to select the file to be inserted into the text body. Press Concatenated messagesSMS messages can be made up text and attached pictures or icons to amaximum size of 160 characters. If you want to send a larger message,your phone will automatically configure your message as a sting of smallermessages and send these simultaneously. Concatenated messages suchas this appear to a user as a single message.Receiving Text MessagesWhen a Short Text Message is sent to your phone, the message Received1 New Message and the message indicator ( ) will flash in the displaywith an alert signal (this signal - an audible tone or vibration - is set in theMy Phone > Sound Settings menu). This indicates that a new messagehas been received.Note: If the message indicator shows red the message area is full andyou will need to delete old messages in order to be able to receivenew messages in the future.
Messages47Reading immediatelyWhen Read is displayed press to read the message immediately. Use to navigate through the message and to identify the sender and thetime the message was sent. With the phone number shown in the Senderfield, press to dial the phone number.Reading laterReceived messages are stored in theInbox.From Idle, press and select Mes-sages > InboxUse to select a message to read(if there is more than one) and press to view the message.You can call the sender, or press to view your other options (thissubmenu can also be viewed bypressing when the message ishighlighted in the Inbox).Responding to Text MessagesPress when you have read a messageto view response options. Alternatively,highlight the message in the Inbox(Messages > Inbox) and press .Chooseto:Reply to the messageCall BackForward the messageStore the numberDelete the messageDelete All messages orExtract Media(if any file is attached to the message)
Messages48Chat SMSThe Chat feature enables you to read sent and received messages onone screen when in Chat SMS mode with another party.1Either: When reading a previouslysent or received message, press and select Chat and/or enter yourNickname (up to 18 characters) - seeText Entry, page 84.Or: Launch Chat SMS mode fromIdle by pressing and selectingMessages > Chat SMS > StartChat. Enter your NicknameIt is now possible to chat with the otherparty, providing they have the chat SMSfacility on their phone. Enter your mes-sage - see Text Entry, page 64. Press and enter the destination phone numberif necessary (or browse and select fromPhonebook).When receiving a message in chat mode, the text will appear automati-cally above your previous message.2 Press , select OK to continue the chat
Messages49If the phone is not in chat mode when receiving a reply to a chat message,the reply will be received as a normal SMS. If a voice call is receivedwhen in chat mode, the phone will allow the user to accept the incomingcall and return to chat mode at the end of the call.Chat conversations are stored and can beviewed in the History folder.To open the folder from Idle, press andselect Messages > Chat SMS >History. Regular Chat users should clearthe history regularly to free memory space.MMS: Setting Up the PhoneMultimedia Message Service (MMS) Configuration must be performedbefore you can send or receive an MMS message. You can create up tothree server profiles on the phone.Note: Your MMS settings may have been pre-configured by yourservice provider. Contact your service provider if you are unclearhow to proceed.
Messages50MMS Configuration1 From Idle press , select Mes-sages > Options > MMS >Server List. Press 2 Select the server required and press3 Use to select Edit and press 4 Select Bearer Type or WAP Set-ting and press to start configur-ing settingsNote: Contact your service provider for advice on settings for MMSconfiguration.Note: Use the Messages > Options > MMS menu to configure otherMMS settings. Contact your service provider for details of requiredsettings.
Messages51Creating an MMS MessageYour phone supports MMS (Multimedia Messaging Service), which meansyou can send digital pictures to an MMS-enabled mobile or to an emailaddress. Wherever you are, attach a photo, audio message or text, andsend it immediately to your friends.The following basic steps must be followed for all MMS messages. Forinformation on multimedia additions, read the following section.1 From Idle press and select Messages > Create >MMS. Press2 Compose the text part of the message (see Text Entry, page 84,for details of entry methods)3 When the message is complete press4 To attach a media file, follow the in-structions on the following page. Tocontinue without attaching a mediafile, select OK from the submenuand press 5 Select To : , press and enter (orbrowse and select) the recipient’sphone number or email address.Press to confirm6 If desired, a message can be deliveredas a copy to another recipient. To dothis, use to select Cc: . Press and enter (or browse and select) thecopy recipient’s phone number oremail address. Press to confirm7A Bcc: address or phone number is added in the same way. Bccdelivery differs from Cc delivery in that the original recipient (whoseaddress is in the To: field) will not be informed of any copies sentto Bcc addresses
Messages528 When the To : field has been filled and any required Cc or Bccentries have been added, add the message subject heading. Use to select Subj:, press and enter the subject heading. Press to confirm, then press 9 Use to select Send or Save asappropriateNote: Saved messages are stored in the Outbox and can be editedand sent in the future.Attaching Media FilesMedia files such as voice files can easily be added to MMS messages.1 Compose a message following steps 1 to 3 on the previous page2 From the submenu select Insert Media3 Use to browse and select media files available on your phone4 When you have selected files, press 5Send or Save the message as instructed on the previous page
Messages53Managing Message ListsMessages, whether sent or received, are mostly stored in the SIM carduntil they are deleted. Selecting a stored message allows it to be read,replied to, edited or deleted.InboxMessages received are stored in the Inboxand tagged with icons: indicates an unread SMS mes-sage indicates an unread MMS mes-sageFrom the Inbox, select a message. Press to read the message or toview other options:Reply to the messageCall Back the senderForward the messageStore the sender’s numberDelete the messageDelete All messages from the InboxExtract Media files from the mes-sageEdit the message content beforeforwarding or saving
Messages54OutboxMessages sent or edited are stored in the Outbox and tagged with icons:indicates an unsent SMS messageindicates an unsent MMS messageindicates an unsent EMS messageCell BroadcastsYou need to specify the topic(s) of information you wish to receive asbroadcasts before they can be received.1 From Idle press , select Mes-sages > Broadcasts > Topics andpress 2 Press twice to insert a new topic3 Use to cycle through the availabletopics4 Press and select RX On from thepop up menu5 Press to insert the currently dis-played topic into your broadcast listWhen a low priority broadcast has been received, will be displayedon the Idle screen. If a high priority broadcast is received, its text con-tent will be displayed on the idle screen
Messages55Enabling/Disabling Cell Broadcasts1 From Idle press , select Mes-sages > Broadcasts and press 2 Select Receive and press 3 Use to select Enable or Disableand press LanguageThe language in which broadcast messages are displayed can be changed(). Go to Messages > Broadcasts > Languages and press
Call Information56Call InformationThis section explains how you can obtain more information about yourcalls, including:DRecent calls made, received and missedDCall durationDCall chargesRecent NumbersRecently dialled phone numbers are stored in Last Dial.If Caller Identification is available, the caller’s phone number for an an-swered call will be stored in the Answered Call menu and an unan-swered call will be stored in the Unanswered Call menu.If Caller Identification is not available then calls will still be stored but willhave the date and time attributed to them.When the store is full the next phone number will overwrite the oldest.1 From Idle press 2 Use to select Last Dial, Answered Call or Unanswered Call.Press 3 Use to select the phone number (or name) you wish to redial.Press You can edit or delete the phone number before dialling – see EditingPhonebook Entries, page 18.If you wish to store the selected number in Phonebook, press whilethe number is displayed – see Storing a Number in the SIM /MobilePhonebook, pages 15-16.
Call Information57Calling the Last Dialled NumberTo redial your last called phone number press twice.Returning an Unanswered CallWhen the display shows that you have received calls but not answeredthem.1 Press The last caller’s phone number will be displayed if it is available.2 Use to select the phone number you wish to dial3 Press Call Duration1 From Idle press , select (Applications >) Phone Option >Call Services > Calls. Press Note: The Calls feature is SIM dependent ( ). If the SIM does notsupport this function then items under Calls menu will be found di-rectly under the Call Services menu.2 Use to select one of the featuresdescribed below, and press Last Call displays the duration and callcharge (if available) of the last call made.Times are indicated as: hours (0-99), min-utes (0-59), seconds (0-59) - HH:MM:SS.All Calls displays the accumulated dura-tion and call charge (if available) of Incom-ing and Outgoing calls. The lock code orPIN2 is required to reset the timer andcall charge meter.
Call Information58GPRS Call Duration1 From Idle press and select (Applications >) Phone Option> Call Services > Connections. Press Note: The Connections function is SIM dependent ( ).2 Use to select one of the features described below, and press Last Connection displays the amount ofdata transferred during the last call.All Connections displays the accumulatedduration and amount of data transfer. Thelock code or PIN2 is required to reset thetimer.Call ChargesTo maintain control over the cost of calls that are made, the phone canbe set to restrict use to a finite number of units overall ().
Call Information59Setting the Unit PriceFirstly, a price per unit must be entered.This is the cost that the Service Providercharges for one unit of call time ().1 From Idle press , select(Applications >) Phone Option >Call Services > Service Charges> Price Unit. Press 2 Press to edit the valuesAt this point you will be asked to enter your PIN2 or Lock code. Do soand press .3 Enter a currency unit (up to three characters) e.g. GBP. Press twice4 Enter a price and press twiceSetting the Maximum Unit LevelThis function allows the user to pre-determine the maximum cost ofcalls made ().1 From Idle press , select(Applications >) Phone Option >Call Services > Service Charges> Max Cost. Press 2 Press twice to edit the valuesAt this point you will be asked to enteryour PIN2 or lock code. Do so and press3 Enter a value (number of units) which is to be the maximumpermitted, and the corresponding cost will be displayed4 Press twice to accept
Call Information60Note: The duration of one unit may vary during the day, peak andoff-peak times. Therefore, the call charge can be calculatedaccordingly. However, call charge information may not give an accu-rate reflection of the tariffs charged by your Service Provider.Call IdentificationIn the Call Services > Calls menu, the Caller’s ID and Withhold ID func-tions allow you to check the status of whether a Caller’s Identification issent or can be received (Withhold ID ).Note: When checking the status the phone must be registered with anetwork.
Advanced Operation61Advanced OperationThis section contains detailed information on call management including:DCall diversionDCall holdingDCall waitingDMaking and receiving a second callDTransferring callsDMulti-party callsDChanging networkDiverting CallsVoice, fax and data calls can be diverted according to different conditionsand to different numbers. For example you may wish voice calls to bediverted to Voicemail when the phone is switched off. To enable calldiversion:1 From Idle press and select(Applications >) Phone Option >Call Divert. Press 2 Use to select the type of call todivert (you can repeat this step asnecessary). Press 3 If diverting voice calls, use to se-lect circumstances in which to ini-tiate the diversion. Press 4 Enable the diversion by selecting Onfrom the Status menu. Press 5 Enter the phone number to divertto (or press and select the num-ber from your Phonebook). Press
Advanced Operation62Note: To edit a call diversion setting, follow the steps above andreset according to the new settings.Note:To cancel a diversion setting, select Off in step 4 above. Tocancel all diversion settings, go to (Applications >) Phone Option> Call Divert > Cancel All.When a diversion is enabled the divert icon ( ) is displayed.When updating or checking the status of Call Divert the phone must beregistered with a network ( ).Holding Calls and Call WaitingHolding a CallDuring a call press . Alternatively:1 Press 2 Use to select Hold Active.Press Resuming a Call1 Press 2 Use to select Resume . Press Making a Second Call1 During an ongoing call, enter phone number (or recall fromPhonebooks – see Browsing the Phonebooks)2 Press The first call will be placed on hold.
Advanced Operation63Receiving a Second CallA second call can be received, if Call Waiting is switched on. This is en-abled from the (Applications >) Phone Option > Call Services >Calls menu. It is not possible to have more than one fax or data call. Allvoice calls must be ended before you can make or receive a fax or datacall ( ).Accepting a Second Call1 Press when the second call is received2 Use to select Accept. Press The current call will be placed on hold.Rejecting a Second Call1 Press when the second call is received2 Use to select Reject. Press Ending Current Call to Receive Another1 Press when the second call is received to end the current call2 Press any key except or to receive the new callOperation During Two CallsSwapping Between Calls1 Press 2 Use select Swap. Press Ending Current Call1 Press 2 Use to select End. Press The held call will remain held.Ending Both CallsPress
Advanced Operation64Call TransferWith two calls connected, Call Transfer enables the user to connect themtogether ending your connection, leaving the other parties to talk to-gether ( ).When two calls are connected to your phone:1 Press 2 Use e to select Trans. Press The two calls will be connected to each other and your call will be ended.Note: Two call transfer cannot be activated while in Multi-party mode.Multi-party CallsA Multi-party call enables three to five people to be in conversation atthe same time. It is possible to swap between a Multi-party call and an-other call in the same way as with two separate calls ( ).Enabling Multi-partyWith two calls connected (one active, one on hold):1 Press 2 Use to select Merge. Press All three parties should now be able to talk to each other.Adding to Multi-partyIt is possible to add parties to the Multi-party call (up to a maximum offive) either by making a call or accepting an incoming call. The call canthen be merged into the Multi-party.Note: When making a call or accepting an incoming call the Multi-party call will be placed on hold. The callers in the Multi-party call cancontinue to communicate with each other while on hold.
Advanced Operation65Splitting a Multi-party CallThe user can select an individual from the Multi-party and remove theirconnection. This enables you to talk privately without the participationof the rest of the Multi-party.1 Press during a Multi-party call2 Use to select Option. Press 3 Use to select a caller in the Multi-party4 Press 5 Use to select Split. Press The selected caller will be split from the Multi-party call and the Multi-party call will be placed on hold (the remaining Multi-party callers canstill communicate).Ending Multi-party CallsThe user can either select an individual in the Multi-party and end the callor end the entire Multi-party call. If a call is held, or an other call is in-coming then an individual call cannot be ended.Ending a Single ConnectionDuring a Multi-party call:1 Press 2 Use to select Option. Press 3 Use to select a caller in the Multi-party4 Press 5 Use e to select End. Press Ending all ConnectionsDuring a Multi-party call:Press to end all the calls at once
Advanced Operation66Changing to a New NetworkWhen not in your home country / region, the user may use a networkthat is not directly subscribed to. This is called ROAMING. Legal restric-tions may not permit roaming in your home region.The New Network function is used to manually select a network that isavailable in your current location.1 From Idle press , select(Applications >) Phone Option >Network > New Network. Press2 Your phone will search for availablenetworks3 Use to select one from the list ofavailable networks. Press If you cannot register with the selectednetwork, that network will be greyed out.When the Search Mode is set to Auto-matic the phone will automatically reselecta new network in order to maintain opti-mum network availability. With theSearch Mode set to Manual the phonewill only use a selected network. If cover-age is lost another network should beselected.
Schedule67ScheduleThe Scheduler can be used to register reminders for personal events aswell as planning holiday periods.Caution: Ensure that any settings made in the Scheduler will not con-travene any regulations whereby the phone may automatically poweron when in an aircraft or medical facility etc. - see Important Information, page i.Creating a ReminderFrom Idle, press , select Scheduler and press again.1 Select [New Event] and press to create a new schedule event. Usethe Navigation key ( ) to select thedate for your reminder.2 First move the cursor to the yearentry and use to adjust the entry ifnecessary.4 Use in the same way to adjust themonth entry.5 Use to place the cursor over the appropriate date entry. Press to select the date6 Enter the time for the reminder. Usethe numbered keys to enter the cor-rect time (using the 24-hour clock)or use to adjust the time displayed.Move between the hour and minutefields using 7 When the time is entered correctly,press to confirm8 Enter a name to identify this sched-ule entry
Schedule68Viewing & Editing RemindersOpen the Scheduler menu. All scheduled reminders are listed. Use tohighlight the reminder you wish to view and press . The time, data andname of the reminder will be displayed. Press to edit the details.
Games69GamesEmbedded GamesTo enter the embedded games menu:From Idle, press and select Games. Use to select a gameand press to launch.Follow the prompts in the pop up menu for playing instructions and gameoptionsDownloadable GamesThe downloadable games menu enables you to use one factory embed-ded game and download another game from the games catalogue.To enter the Downloadable games menu:From Idle, press and select Applications > Games. Use toselect a game and press to launch.Note: A downloaded game will overwrite the previously downloadedgame.Follow the on-screen instructions to play the game.The game catalogue is renewed regularly and updates automatically whena game is downloaded.
Games70Game SettingsUse the Applications > Games menu to set your game nickname andset sound, backlight and vibration levels for gameplay.1 From Idle, press , select Applications > Games > Setting2 To enter a Nickname press . Enter the name and then press to confirm3 Use to select Sound. Press 4 Sound can be set to Off, Low, Medium or High. Use to selectthe desired setting and then press to confirm5 Use to select Vibrations. Press 6 Vibration can be set to Off or On. Use to select the desiredsetting and then press to confirm7 Use to select Back light. Press 8 The back light can be set to Off, On 30s (on for 30 seconds) orAlways on. Use to select the desired setting and then press to confirm
Managing Multimedia Files71Managing Multimedia FilesThe multimedia files saved in G60U are located in the Media Folder (MyPhone > Media Folder). There are four predefined folders (Picture,Animation, Melody and Memory Status).Note: Changing SIM does not affect the contents of stored data.Displaying Pictures and Animations1 From Idle, press , select My Phone > Media Folder > Pic-tures / Animation. Press 2 Use to select a file to display. Press 3 Select View. Press Note: The phone cannot display a file that is not in one of the sup-ported formats.
Managing Multimedia Files72Playing Melodies1 From Idle, press and select My Phone > Media Folder >Melody. Press 2 Use to select a file to play. Press to viewNote: You can compose your own melodies and ringtones. Turn toComposing a Melody in Personalising Your Phone for full instructions.Note: You cannot edit polyphonic ring tones, music files or files thatcannot be forwarded or saved.Renaming Files1 From Idle, press , select My Phone > Media Folder and openthe subfolder for the file you wish to rename. Press 2 Use to select the file to rename. Press 3 Select Rename. Press Note: Do not use special characters in the new name.
Managing Multimedia Files73Creating Mail from FilesYou can jump in one step from a file to the create mail screen with thefile as an attachment.The phone will display the ‘Create Mail’ screen.Note: You cannot copy a file that cannot be forwarded or saved;You can press to select Create Mail while the file is displayed.Deleting Files1 From Idle, press , select My Phone > Media Folder and openthe subfolder for the file you wish to delete. Press 2 Use to select the file to delete. Press 3 Select Delete. Press Checking File PropertiesYou can view the file name, date, file size, whether the file can be for-warded and whether it can be saved.1 From Idle, press , select My Phone > Media Folder and openthe subfolder for the file you wish to check. Press 2 Use to select the file. Press 3 Select Property. Press Note: If there is not enough memory capacity in the folder when youtry to save a file, the phone will display Folder is Full. Delete Data?Press to keep file or to delete file.
Managing Multimedia Files74Checking Folder PropertiesTo check the status of the Media Folder, from Idle, press , select MyPhone > Media Folder > Memory Status. Press . A graphic dis-play of free space in the folder will be displayed.
WAP Browser75WAP BrowserYour phone’s WAP (Wireless Application Protocol) Browser enables theuser to access Internet services supported by the network, such as news,weather reports and sport.Browser SettingsBefore Internet services can be accessed, the SIM must be data enabledand the relevant configuration information, entered into the phone.Note: The configuration information may have been pre-programmedby your service provider. Modifying these settings may cause failureof the Browser.1 From Idle press , select Browser> Browser Setting > Set Profile.Use to select a browser profile(you can configure up to fivebrowser profiles). Press 2 Select Edit. Press 3 Select WAP Setting. Press
WAP Browser76A list of configuration parameters will be displayed. Select each param-eter in turn and enter the appropriate values (contact your service pro-vider for details if necessary).For each browser profile, set also the Bearer Type. Go to Browser >Browser Setting > Set Profile > [Select Profile] > Edit > BearerType.To configure a GPRS browser, enter User Name, Password and Apn(Access Point Name).To configure a CSD browser, enter User Name, Password, PhoneNumber, Line Type and Transfer Rate.Note: Contact your service provider for setup values if you are unsure.
WAP Browser77Record your WAP settings in the table at the rear of this booklet for easyreference.When you have entered settings for a browser profile, you may wish torename the profile to make it easier to remember. To rename a profile,go to Browser > Browser Setting > Set Profile > [Select Profile]> Rename. The current profile name will be displayed. Edit this nameto rename the profile.Since you can set up to five profiles, you should also select which is youractive profile. To do so, go to Browser > Browser Setting > SetProfile > [Select Profile] > Set As Active. Press
WAP Browser78Activating the BrowserTo activate the Browser, either:From Idle, press and select Browser > Start Browser.Press The first time that the browser is activatedthere will be no content. Each time thebrowser is activated, the last page viewedfrom the previous WAP session will berecalled. At the start of a WAP session, thebrowser content may be retrieved fromthe cache (cache is the phone’s memorythat stores content downloaded in thepast). At this stage the user will remain offline. When data is required from the WAPserver, the user will be prompted to Startdata call?If Yes is selected, the phone will go on line and the browser will go to thehome page.Navigating ContentUse the Navigation key ( ) to scroll through the content on the screenas follows:Use to scroll up/down on the current pageUse to return to the previous object/pageUse to return to the next selectable object/pageWhen linked text (underlined text) is highlighted, press to load thepage represented by the link.
WAP Browser79Browser MenuThe Browser contains its own menu whichis applicable when content is currentlybeing displayed (either on-line or off-line).This menu is used as follows:BackReturns the user to the Browser Start Up menuHomeDisplays the Home URL content as defined by the network operatorExitDeactivates the BrowserBookmarksUse, view, add and delete bookmarksGo To URLEnter URL to openSave ItemsTo save images or other items from the current pageSnapshotsTake a snapshot of the current pageShow URLDisplay the current URLReloadReload and update the current page
WAP Browser80Homepage URLDownload parameters (enable ordisable the downloading of multime-dia files)Restart BrowserSecurity submenuAboutProvides information about the type of browser and security optionsSettingsAllows the user to select and set:
WAP Browser81Using BookmarksFrequently accessed pages may be bookmarked to save time - you won’thave to enter the URL each time you want to visit the page.Adding a Bookmark1 While viewing the page, press 2 Use to select Bookmark3 Use to select either Title or URL as the Bookmark nameRecalling Pages Using BookmarksSelect Bookmarks from the Browser menu. Select View and use tohighlight the bookmark you want. Press .Renaming a BookmarkSelect Bookmarks from the Browser menu. Select View and use tohighlight the bookmark you want. Press and select Edit.Deleting BookmarksSelect Bookmarks from the Browser menu. Select View and use tohighlight the bookmark you want. Press and select Delete.
WAP Browser82Deactivating the BrowserThe Browser can be deactivated as follows:When browsing on-line, press to review cache off line.When browsing off-line, press to return to Idle mode.
Additional Features83Additional FeaturesVoice MemoYou can record a two-way conversation during a call and use the phoneas a dictaphone. The maximum length of a recording is 16 seconds. Oldrecordings are overwritten; only one recording can be stored.Note: If a different SIM is installed any voice memos will be lost.Caution: Security of a recorded message is your responsibility. YouMUST ask for the other party’s consent before recording.Record a Voice MemoFrom Idle, press and select Applications > Record. Press The recording will stop automatically after 16 seconds.Recording a CallDuring a call, press . Use to select Memo Press .A tone will sound when recording starts. When the recording stops atone will sound.If you press while recording a call, recording will stop but no tone willsound to either party.
Additional Features84Play Back a Voice MemoFrom Idle, press and select Applica-tions > Voice Memo Play > Playback.Press .To stop playing, press .Volume Control During PlaybackWhile playing back use to adjust the volume of the voice memo.Delete a MemoFrom Idle, press and select Applications > Voice Memo Play >Delete. Press .
Additional Features85DTMF TonesDual Tone Multi-Frequency Tones (DTMF) tones can be sent duringconversation. These are often used to access voice mail, paging and com-puterised home banking services. For example, you may need to input anumber to remotely access voice mail messages. A phone number maybe stored in the Phonebook with DTMF tones, allowing the number tobe dialled upon recall and the DTMF number to be sent automatically.Sending DTMF Tones During a CallSimply enter digits ( to , and ) during the call.Pause DialPause Dialling allows you to send DTMF tones automatically.1 Enter phone number2 Press and hold until a p is displayed at the end of the phonenumber entered3 Enter DTMF digits after the pause, e.g. enter the number to ac-cess voice mail messages.4 Press When the call is successful DTMF tones will be sent after 3 seconds orpress to send the DTMF tones manually.Note PadDuring a call numbers can be entered which you may wish to dial whenthe call has ended.During a call:1 Enter phone number2 When the call has ended press to call that numberTo store the number in Phonebook, press while the number is dis-played – see the instruction on storing numbers in the section Phonebook.
Additional Features86Desktop HandsfreeDesktop Handsfree enables you to hold a conversation without havingto hold the phone to your ear.Note: Do NOT hold the phone to your ear in Handsfree mode.Swapping Between Handsfree and Handheld CallsDuring a Handheld call:1 Press 2 Use to select Handsfree. Press During a Handsfree call:Press twice to revert for Handheld operationAnswering a Call Handsfree:To answer a call using Handsfree, press and hold .Auto AnswerWhen Auto Answer is switched on, and Personal Handsfree or a headset or car kit is connected, a call will be answered without pressing anykeys. Any call waiting should be answered in the normal way.To enable Auto Answer, from Idle, press and select My Phone >Auto Answer. Choose Enable and press .Note: Take care when Auto Answer is selected to ensure unauthorisedlisteners cannot overhear your phone conversations.
Camera Accessory87Camera AccessoryCamera AccessoryWith the Panasonic camera accessory attached to your phone, you cantake photos then save them or send them immediately in a MMS message.The camera accessory slots onto the accessory connector on the base ofyour phone.When the camera accessory is plugged in,the main menu changes. The Key Guardicon is replaced by a Camera icon asshown. Select Camera for all relatedfunctions.Taking a pictureTo take a picture, first ensure the camera accessory is plugged in. Then:1 From Idle, press and select Camera. Press 2 Position the camera to frame the desired photoUse to zoom in, to zoom out and to turn on the photo lightWhen you are ready, press to capture the photo3 The captured photo will be displayed. Press to store the photoin your Media Folder or to immediately attach the photo to anew MMS message ready for sending (see Messaging for details ofhow to compose and send MMS messages). Press to delete thephoto instead.
Camera Accessory88Camera OptionsTo take a picture, first ensure the camera accessory is plugged in. Then:1 From Idle, press and select Camera. Press 2 Press to open the Options menu. Select from the followingoptions:Photo ResolutionChoose from VGA (640±±±±±480), QVGA (320±±±±±240), QQVGA(160±±±±±120) or Screen Size (128±±±±±96).Note: Higher resolution pictures are of better quality but occupy alarger share of your phone’s memory. If you want to take several highresolution pictures, consider reducing the amount of memory taken upby other types of media file such as ring tones and downloaded games.Photo LightTurn the built-in photo light On or Off.Self TimerTurn the Self Timer On or Off. When the Self Timer is turned on, thereis a delay after the capture button is pressed before the photo is taken.Shutter SoundSelect from three available shutter sounds.
Text Entry89*Press once to enter a single capital letter (subsequent characterswill be lower case). Pressing twice acts as a keyboard CAPS LOCKfunction and subsequent characters will be uppercase. Press athird time to return to lowercase character entry.Press to return to the message screen.Text EntryThe phone provides a means for entering alphanumeric characters toenter details into the Phonebook, to create text etc. This section detailsthe characters that can be entered and the relevant keys to press.
Text Entry90T9® Text InputUsing this mode of text entry dramatically reduces the number of keypresses required:Press a key once for any letter you require on that key. The desiredletter may not be displayed. Continue pressing other keys until the endof a word is reached; then check that the word has been typed correctlybefore continuing on to the next word.If the combination of letters typed has produced a word which is not theone you require, press repeatedly until the correct word is displayed.Continue to the next word.If the word you require is not in the internal dictionary (i.e. it is a propernoun or a rarely used word) then it should be entered using the Normal() mode.Other Text ModesTo access any of the other text entry modes use to cycle through untilthe desired mode is displayed in the left side of the display.When using Normal ( ), Greek ( ) or Extended ( ) text entrymodes, each time a key is pressed in quick succession it will display thenext character available on that key. Releasing the key, or pressing an-other key will enter the currently displayed character and the cursor willmove to the next position.Editing TextPressing will move you up or down one text line.Pressing will move you left or right one character. When the cursor ismoved over a character and another key pressed this will insert the newcharacter immediately before the selected character. Pressing willdelete the character to the left of the cursor or delete the current linewhen pressed and held.
Trouble Shooting91Trouble ShootingShould any problem persist contact your dealer.ProblemPhone will notswitch onExtremely shortbattery life for anew batteryShort battery lifefor an old batteryThe chargingindicator does notlight, the batterylevel indicator doesnot appear and thephone cannot beswitched on whenchargingBattery fails tochargeCauseThe network you areusing and the conditionof the battery can affectbattery lifeThe battery has wornoutThe battery is notattached to the phoneor when the battery hasbeen deeply dischargedthe phone will take ashort time until theindicator lightsThe battery is notattached to the phoneBattery has beenconnected to the phoneafter the Fast TravelCharger has beenswitched onRemedyCheck that the battery isfully charged and correctlyconnected to the phoneReplace with a new fullycharged batteryLeave the phone chargingthe battery for a fewminutes before theindicator is lit andattempting to switch it onEnsure the battery isfitted to the phone priorto commencing charging.
Trouble Shooting92Calls cannot bemadeCalls cannot bemade from FixedDial StoreCalls cannot bereceivedEmergency callscannot be madePhone numberscannot be recalledfrom PhonebookThe phone islockedOutgoing calls arebarredThe phone is notregistered to anetworkThe phone is notswitched onIncoming calls arebarredThe phone is notregistered to anetworkYou are not in aGSM coverage areaThe phone islockedPhone number hasbeen restrictedUnlock the phoneDisable the outgoing callbarring, or barred dialMove to a coverage areaand operate your phoneafter it has registered witha network.Check your SIM supportsFixed DialCheck if the Fixed Dial isswitched onCheck the phone numberis stored in the Fixed DialSwitch the phone onDisable the incoming callbarringMove to a coverage areaand operate your phoneafter it has registered witha network.Check that the antennasymbol S is displayed -move to a coverage areaand operate your phonewhen the antenna symbolis displayedUnlock the phoneSwitch off restriction
Trouble Shooting93Important Error MessagesThese are some of the most important error messages which may bedisplayed:Area NotAllowedNetwork NotAllowedSecurity FailureSIM Blocked /Contact ServiceproviderSIM ErrorSIM InvalidFunctionUnavailablePIN2 InvalidatedMessageRejected StoreFullPhone NumberToo Long(Max:20)Warning StoreFull Continue ?Roaming in the selected area is not allowedRoaming with the selected network is not allowedThe network has detected an authentication failurebecause your SIM is not registered with that network- contact your Service ProviderThe SIM is blocked because one of the PIN/PIN2unblocking keys (PUK/PUK2) has been enteredincorrectly ten times - contact your Service ProviderThe phone has detected a problem with the SIM -switch the phone off and then back on; if the messageis still displayed contact your Service ProviderThe SIM has failed one or more of the SIMpersonalisation checks - contact your ServiceProviderThe selected feature is either not supported by theSIM or is not available with the current subscription -contact your Service ProviderThe PIN2 is blocked permanently because the wrongPUK2 has been entered ten times, services controlledby PIN2 cannot be used - contact your ServiceProviderA message has been received but the message storeis full - to receive messages, delete some of thecurrently stored messages or set messages to AutoDeleteThe edited or newly created Phonebook number istoo long for the SIMThe message area is full. Your messages cannot bestored until some of the currently stored messagesare deleted
Trouble Shooting94VerificationFailureIncorrect LockCodeIncorrect PIN /PIN2 / PUK /PUK2Auto Redial ListOn changing the phone lock code, verification of thenew code is incorrect - retry changing the lock codewith correct verificationDisabling or enabling the lock code has failed due toincorrect entry of the lock code - re-enter lock codeThe entered code is incorrect - re-enter codecorrectlyRedial list of unsuccessfully dialled numbers is full -switch the phone off and then on again
Glossary of Terms95Glossary of TermsAPNCutCopyCHAPDTMF TonesEMSGPRSGSMNetworkOperatorPAPPasswordPINPIN2Access Point Name. Directs the user to the gatewayor the required service.Permanently removes selected text from short textmessageCopies selected text from short text message withoutremoving it from the original messageChallenge Handshake Authentication Protocol. Asecurity feature for the GPRS network.Dual Tone Multi-Frequency tones allow you tocommunicate with computerised phone systems,voice mailboxes etc.Enhanced Message Service. Upgraded feature of TextMessagesGeneral Packet Radio Service. The Technology thephone uses.Global System for Mobile Communications. Thename given to the advanced digital technology thatyour phone uses.The organization responsible for operating a GSMnetwork.Password Authentication Protocol. A security featurefor the GPRS network.Used for the control of the Call Bar. Supplied by yourService Provider.Personal Identification Number used for SIM security.Supplied by your Service Provider. If the PIN isentered incorrectly 3 times, the PIN will be blocked.Personal Identification Number used for the controlof Fixed Dial Store and Call Charge metering.Supplied by your Service Provider. If the PIN2 isentered incorrectly 3 times, the PIN2 will be blocked.
Glossary of Terms96PUK/PUK2RegistrationRoamingServiceProviderSIMWAPPIN/PIN2 Unblocking Key. Used to unblock the PIN/PIN2. Supplied by your Service Provider. If the PUK/PUK2 is entered incorrectly 10 times, the PUK/PUK2will be blocked.The act of locking on to a GSM/GPRS network. This isusually performed automatically by your phone.The ability to use your phone on networks other thanyour Home network.The organization responsible for providing access tothe GSM/GPRS network.Subscriber Identity Module. A small smart-card whichstores unique subscriber and user-entered informa-tion such as Phonebook and Short Messages. Suppliedby your Service Provider.Wireless Application Protocol. The communicationstandard which enables you to download resourcesfrom the Internet to your phone
Specifications Phone (Including Battery) GSM850 Type GSM1900 GPRS Class 8 Temperature Range Charging +5ºC - +43ºC Storage -20ºC - +60ºC Weight 85g Dimensions (mm) Height x Width x Depth 104 x 47 x 19.15 Supply Voltage 3.7V DC, 740mAh Standby Time (hrs) 200 (approx.) Talk Time (hrs) 2.5 (approx.) Charge Time (Phone off) Up to 120m Antenna Internal SIM Type 1.8V/3V Phonebook Memory 200 + SIM Animation Themes 3 Voice Memo 1 x 16 seconds Ring tones 20 fixed Scheduler Up to 10 Entries Alarms 3 Note: Charge time will be longer when the phone is turned on. Battery life is affected by the network being used and the condition of the battery. Talk and standby time will be dependant upon network conditions, SIM, back light usage and battery condition.
EU Warranty98EU WarrantyEU/EEA - Wide guarantee is applicable in the EU/EEA and Switzerland.Panasonic GSM European Service Guarantee Conditions DearCustomer,Thank you for buying this Panasonic digital cellular telephone. ThePanasonic GSM European Service Guarantee only applies while travelingin countries other than where the product was purchased.Your local guarantee is applicable in all other cases. If your PanasonicGSM telephone requires service while abroad, please contact the localservice company shown on this document.The GuaranteeThe applicable period of the European wide guarantee for GSM is gener-ally 12 months for the main body and 3 months for the rechargeablebattery. With respect to a product used in a country other than a countryof purchase, notwithstanding what is stated in the conditions below, thecustomer will benefit, in that country of use, from these guarantee peri-ods of, respectively, 12 and 3 months, if these conditions are more fa-vorable to him than the local guarantee conditions applicable in such coun-try of use.Conditions of GuaranteeWhen requesting guarantee service the purchaser should present thewarranty card together with proof of purchase, to an authorized servicecentre.The guarantee covers breakdowns due to manufacturing or design faults;it does not apply to other events such as accidental damage, howevercaused, wear and tear, negligence, adjustment, modification or repairnot authorized by us.Your sole and exclusive remedy under this guarantee against us is therepair, or at our option the replacement, of the product, or any defec-tive part or parts. No other remedy, including, but not limited to, inci-dental or consequential damage or loss of whatsoever nature shall beavailable to the purchaser.This is in addition to and does not in any way affect any statutory orother rights of consumer purchasers. This guarantee applies in countriesshown on this document at the authorized service centres detailed forthat country.
EU Warranty99Panasonic Service Center RendsburgFERNSEH-DIENST B&W Service GmbHKieler Straße 4124678 RendsburgTel. +49 (0)4331/ 14 11-0Panasonic Service Center BremenCOM Elektronik Service GmbHRübekamp 5028219 BremenTel. +49 (0)421/ 691 80 69Panasonic Service Center HannoverCOM Elektronik Service GmbHVahrenwalder Straße 31130179 HannoverTel. +49 (0)511/ 37 27 91Panasonic Service Center MagdeburgSERKO GmbHEbendorfer Chaussee 4739128 MagdeburgTel. +49 (0)391/ 289 90 69Panasonic Service Center DüsseldorfVTH GmbHKölner Straße 14740227 DüsseldorfTel. +49 (0)211/ 77 90 25Panasonic Service Center EssenBernd van Bevern GmbHHeinrich-Held-Straße 1645133 EssenTel. +49 (0)201/ 84 20 220Panasonic Service Center OsnabrückPetsch Kundendienst GmbHPagenstecherstraße 7549090 OsnabrückTel. +49 (0) 541/ 68 038Panasonic Service Center WiesbadenJ. Hemmerling - VAD GmbHOstring 765205 WiesbadenTel. +49 (0)6122/ 90 91 10Panasonic Service Center MannheimN. SchaafReichenbachstraße 21-2368309 MannheimTel. +49 (0)621/ 72 787-0Panasonic Service Center StuttgartHans BeckFriedrich-List-Straße 3870771 Leinfelden-EchterdingenTel. +49 (0) 711/ 94 701-0UKService Centres in EnglandTel. +44 (0) 8705 159159IRLService Centres in IrelandTel: +353 (0) 1 2898333DPanasonic Service Center DresdenSERKO GmbHGroßenhainer Straße 16301129 DresdenTel. +49 (0)351/ 85 88 477Panasonic Service Center CottbusPetsch Kundendienst GmbHAm Seegraben 2103058 Gross-GaglowTel. +49 (0)355/ 58 36 36Panasonic Service Center LeipzigKES Keilitz-Electronic-Service GmbHFöpplstraße 1904347 LeipzigTel. +49 (0)341/ 244 33 33Panasonic Service Center ChemnitFWPS Rundfunk- u. Fernsehservice GmbHFietenstraße 1609130 ChemnitFTel. +49 (0)371/ 40 10 359Panasonic Service Center BerlinSERKO GmbHSchwedter Straße 34a10435 BerlinTel. +49 (0)30/ 44 30 3221Panasonic Service Center BerlinRUESS SYSTEMSThrasoltstraße 1110585 BerlinTel. +49 (0)30/ 342 2013Panasonic Service Center Rostockwarnow electronic service gmbhAn der Jägerbäk 218069 RostockTel. +49 (0)381/ 82 016Panasonic Service Center HamburgELVICE Service GmbHSpaldingstraße 7420097 HamburgTel. +49 (0)40/ 23 08 07
EU Warranty100Tél. : 04 91 58 07 55CORDON ElectroniqueBP 460FI Taden22107 DINAN CEDEXTél. : 02.96.85.82.20Fax : 02.96.85.82.21EASY REPAIR26 rue des Cosmonautes31400 ToulouseTél. : 05.62.71.48.14Fax : 05.62.71.48.15EASY REPAIR22 boulevard des Brotteaux69006 LyonTél. : 04.72.83.02.02Fax : 04.78.52.40.38ELECTRONIQUE SERVICEAvenue FiguièresFAC Font de la Banquière34970 LATTESTél. : 04.67.15.96.30Fax : 04.67.20.04.72GENERAL ELECTRONIQUE16 rue Joseph CugnotF.I. Bracheux60000 BEAUVAISTél. : 03.44.89.79.00Fax : 03.44.05.16.96Négoce Technique etMaintenance40 boulevard Bessières75017 PARISTél. : 01.44.85.21.66Fax : 01.42.29.60.05S.B.E.F.I. de la LianeBP 962360 SAINT LEONARDTél. : 03.21.10.10.21Fax : 03.21.80.20.10NLService-centra inNederlandsPanasonic-Centre Nederland(Servicom bv)P.O Box 162802500 BGDen-HaagNederlandTel. +31 703314314Panasonic Service Center ReutlingenHerbert GeisslerLichtensteinstraße 7572770 ReutlingenTel. +49 (0)7072 / 92 96-0Panasonic Service Center MünchenG.Berghofer & W.Kaller GmbHHelene-Wessel-Bogen 780939 MünchenTel. +49 (0)89/ 318 907-0Panasonic Service Center AugsburgKlaus BienekAffinger Straße 486167 AugsburgTel. +49 (0)821/ 70 70 75Panasonic Service Center NürnbergHerbert Geissler GmbHFriedrich-Ebert-Straße 2190537 FeuchtTel. +49 (0)9128/ 70 67-0Panasonic Service Center EisenachBlitz Electro-Electronic-GmbHBahnhofstraße 1799817 EisenachTel. +49 (0)3691/ 29 29 42 8AService-Fentren in ÖsterreichFunk Fuchs GmbH & CoKg Unterhart 904642 SattledtTel. +43 7244 733Funktechnik SeisslDorf 796330 SchwoichTel. +43 5372 8217Electro OberndorferLinzer Straße 2-44840 VöcklabruckTel. +43 6772 72889Panasonic Austria Handelsges.mbHLaxenburgerStraße 2521232 WienTel. +43 222/61080FRCETELECFI de la Delorme5 Avenue Paul héroult13015 MARSEILLETél. : 04 96 15 77 77
EU Warranty101MEGAFIX KYLouhenkatu 974100 IisalmiPuh. +358 017 14631T: MI.M.HAAPOJAMiilukatu 740320 JyväskyläPuh. +358 014 677121OUTOKUMMUN PUHELIN Pohjoisahonkatu 983500 OutokumpuPuh. +358 013 562211SETELE OYRengastie 3160100 SeinäjokiPuh. +358 06 4148344TURUN J-MARKKINAT OY Tuureporinkatu 620100 TurkuPuh. + 358 02 2332685NServicesenter I NorgeNorsk ElektronikksenterFetveien 12007 KjellerTlf: +47 63 80 45 00Panasonic Norge ASØstre Aker vei 220508 OsloTlf: +47 22 91 68 00GRPCentros de Assistência em PortugalPAPELACO, S.A.Vale Paraiso - Ferreiras8200 ALBUFEIRAALGARVETel. +351 89 589960PAPELACO, S.A.Largo de Santos, 91200 LISBOAFonweg 602516 BMDen-HaagNederlandTel. +31 703314314IPer I Centri Assisitenza in ItaliaServizio ClientiTel. +39 02/ 67072556EPanasonic España, S.A.Servicio de Atención a Usuarios:Tel: 902 15 30 60DKFor nærmeste servicecenter ring PanasonicDanmarkTel. +45 43 20 08 50SFirmor I SverigeKomrepRosenlundsgatan 4411 20 GöteborgTel. +46 031-173354SignalstyrkanKungsholmstorg 4104 22 StockholmTel. +46 08-6542500CR serviceIndustribyn 3232 37 MalmöTel. +46 040-430030SFHuoltokeskukset Suomessa:KAUKOMARKKINAT OYPANASONIC-HUOLLOT Kutojantie 402630 EspooPuh. +358 09 521 5151 HuoltoPuh. +358 09 521 5155 Varaosat Ja TarvikkeetSETELE OYVanha Viertotie 700300 HelsinkiPuh. +358 09 549100PLAY-SHOP SERVICE Keskuskatu 300100 HelsinkiPuh. +358 09 27053626
EU Warranty102Tel. +351 1 3970539PAPELACO, S.A.Largo do Tribunal, Lote 112400 LEIRIATel. +351 44 28071PAPELACO, S.A.Rua Cidade de Santos, 31R/C9000 FUNCHALMADEIRATel. +351 91 231523PAPELACO, S.A.Rua do Outeiro,Lote 25 - Gemunde4470 MAIAPORTOTel. +351 2 944 0354/9PAPELACO, S.A.Rua Major Leopoldo da Silva,Lote 33500 VISEUTel. +351 32 424771BCentres de service après-vente en BelgiqueBROOTHAERSHoevelei 1672630 AARTSELAARTel. +32 03/887 06 24HENROTTERue du Campinaire 1546240 FARCIENNESTel. +32 071/39 62 90PIXEL VIDEOTECHRue St Remy 74000 LIEGETel. +32 041/23 46 26DELTA ELECTRONICSRue P.d’Alouette 395100 NANINNETel. +32 081/40 21 67ELEKSERVICE FEYS Houthulstseweg 568920 POELKAPELLETel. + 32 057/48 96 37AVS WAASLAND Lavendelstraat 1139100 ST NIKLAASTel. +32 03/777 99 64A.V.T.C SAKleine Winkellaan 541853 STROMBEEK-BEVER Tel. + 32 02/26740 19RADIO RESEARCHRue des Carmélites 1231180 BRUXELLESTel. +32 02/345 68 56VIDEO TECHNICAL SERVICEAv. du Roi Albert 2071080 BRUXELLESTel. +32 02/465 33 10SERVICE CENTER Kapellestraat 959800 DEINFETel. +32 09/386 67 67TOP SERVICEWesterloseweg 102440 GEELTel. +32 014/54 67 24TELECTRO SCQuai des Ardennes 504020 LiègeTel. +32 041/43 29 04LCentres de service après-vente au LuxembourgNOUVELLE CENTRAL RADIORue des Jones 15L - 1818 HowaldLuxembourg - Grand DuchéTel. +32 40 40 78CHJonh Lay Electronics AGLittauerboden6014 LittauPhone: +41 41 259 9090 Fax: +41 41 2520202TR
EU Warranty103
Personal Settings104Personal SettingsUse the table below to record your GSM/GPRS WAP settings.Item Hint Current SettingNameHome URLGateway IPPrimary IPSecondary IPPrimary PortSecondary PortCSDGPRSLine Type Analogue / ISDNDigital Dial #Analogue Dial #User NamePasswordTransfer RateGPRSAccess Point NameUser NameUser PasswordAuthentication Normal/Encrypted/None(PAP) (Chap)
Menu Structure105Menu Structure1. My Phone2. Phone Book3. Games4. Browser5. Key Guard6. Messages7. SIM Dependent8. Scheduler9. ApplicationsIDLE SCREEN>> Indicates there are further submenusFrom Idle press to display the main menu.To select a menu, use to navigate to the icon of the menu yourequire and press when the icon is highlighted. To exit the currentmenu and return to the previous level, press . To exit the menustructure, press and hold .During a call a restricted menu will be available. Language >>Sound Settings >>Display Settings >>Media Folder >>Auto Answer >>DefaultsBrowse >>Create >>Group Setting >>Review >>Copy Entries >>My Numbers >>Info Numbers >>Service Dial >>Fixed Dial >>VoicemailHot Key Dial ListPinBallBlack JackStart BrowserBrowser Setting >>InboxOutboxCreateChat SMSBroadcastsOptions >>GamesVoice Memo PlayRecordClock Function >>CalculatorEdit Ringtone >>Phone Option >>
Note106Note
Licensing107LicensingTegicT9® is a trademark of Tegic Communications Inc.T9® Text Input is licensedunder one or more of the following: U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057;United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat.No.HK0940329; Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0842 463 (96927260.8) DE/DK, FI, FR, IT, NL, PT.ES, SE, GB; and addi-tional patents are pending worldwide.© Matsushita Mobile Communications Development of Europe Ltd 2003Information in this document is subject to change without notice. Nopart of these instructions may be reproduced or transmitted in any formor by any means without obtaining express permission from MatsushitaMobile Communications Development of Europe Ltd
Licensing108
The Serial Number can be found on the outside of the phone underthe battery. For your convenience we recommend that you note thefollowing details as a record of your purchase.Part NumberSerial NumberDealer NamePurchase Date
Matsushita Communication Industrial Corporation of the PhilippinesLaguna Technopark Sta. Rosa, Laguna, PhilippinesPrinted in Philippines08.07.02

Navigation menu