Cognex Germany Aachen DM7550 Handheld Reader for Industrial ID User Manual Part 1

Cognex Ltd. Handheld Reader for Industrial ID Users Manual Part 1

Contents

Users Manual Part 1

7500 755075501234561Status:   Red: read failed   Green: read succeeded   Blue: cordless link up   Blinking red: low batteryTrigger (press and hold to read)Charge:   Steady green: fully charged   Blinking green: chargingStatus:  Steady red: connected to power   Blinking red: data transferPowerData (RS-232, USB, PS/2 Keyboard)Cable release (corded unit) Inserting device in base establishes Bluetooth® link and charges battery.Scan USB Serial or RS-232 Serial configuration  code from the back of this document.Allow the Windows Found New Hardware Wizard to run.Select Automatic driver installation.When prompted during driver load, click Continue Anyway.1.2.Use setup tool to configure reader (shortcut on desktop)Common tasksControls and informationQuestion and Answer help1.2.3.22123Install SoftwareConnect DevicePlace in Base (Cordless Only)Load USB Driver (USB Only)Scan Connection CodeStart Setup Tool1USB: 42206416-01RS-232: 42206139-04USB: 42206161-01RS-232: 42203758-03SInsert CD-ROM and install software (follow prompts). Run setup.exe if installer does not start automatically.You must have Administrator privileges to install..NET Framework is installed if required.When prompted, click Continue Anyway. 1.•••2.Connect base or device to PC using USB or Serial cable (PS/2 keyboard cable is not supported by setup tool.)Connect base or device to power supply.1.2.
iCopyright © 2006 Cognex Corporation All Rights Reserved This document may not be copied in whole or in part, nor transferred to any other media or language, without the written permission of Cognex Corporation. The hardware and portions of the software described in this document may be covered by one or more of the U.S. patents listed on the Cognex web site http://www.cognex.com/patents.asp. Other U.S. and foreign patents are pending. Cognex, the Cognex logo, and DataMan are trademarks, or registered trademarks, of Cognex Corporation. DataMan590-66087500 ID Reader7550 Cordless ID ReaderQuick Reference7500 Corded 7550 CordlessProduct support:     http://support.cognex.comRS-232 SerialWeight 270g (9.5 oz) 330g (11.6 oz)Base: 250g (8.8 oz)Operating Temperature -10ºC — 50ºC (14ºF — 122ºF) 0ºC — 50ºC (32ºF — 122ºF)Storage Temperature -40ºC — 70ºC (-40ºF — 158ºF) -40ºC — 60ºC (-40ºF — 140ºF)Charging Temperature 0ºC — 40ºC (32ºF — 104ºF)Maximum Humidity 95% (non-condensing)Environmental IP52 IP52Base: IP41Drop (Impact) 50 drops from 2m (6.5’) to concrete 25 drops from 2m (6.5’) to concreteCodes Data MatrixTM (ECC 0, 50, 80, 100, 140, and 200)QR CodeUPC/EAN/JANInterleaved 2 of 5Code 39, Code 128, and Code 93Power Consumption 1000 mA @ 5 VDC Base: 800 mA @ 9 VDCBattery Life at 25ºC  (77ºF) 8h (normal use)PS/2 Keyboard WedgeUSB SerialUSB KeyboardSoft reset (save settings) Hard reset (discard settings)US English FrenchGermanConnectionKeyboardCommandsSetupsCAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. The battery should be disposed of by a qualified recycler or hazardous materials handler. Do not incinerate the battery or dispose of the battery with general waste materials. NOTE: Any modifications to this device not expressly approved by COGNEX CORPORATION may void your authority to operate it.Unlink base stationEnable Setup 3 only Enable Setup 4 onlyEnable Setup 1 only Enable Setup 2 onlySee Configuration Codes in setup tool for more languages.5 mil10 mil20 mil0 - 35 mm (0 - 1.4 in)13 mil 0 - 62mm (0 - 2.4 in)0 - 55 mm (0 - 2.1 in)0 - 85 mm (0 - 3.3 in)201 2 340 60 80 mminNotesReading Distance1D Codes2D Codes

Navigation menu