Code BTA02 6-ft Straight USB Cable with Embedded Modem User Manual

Code Corporation 6-ft Straight USB Cable with Embedded Modem

User Manual

USER MANUALNORTH AMERICAMANUAL VERSION 02RELEASE DATE: JUNE 2015CR5000Configuration Guidewww.codecorp.com YouTube.com/codecorporation®
2D021992_03 CR5000 User ManualStatement of Agency ComplianceCode Reader™ 5000 User ManualThe Code Reader™ 5000 (CR5000) has been tested for compliance with FCC regulations and was found to be compliant with all applicable FCC Rules and Regulations.IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, this device must not be co-located or operate in conjunction with any other antenna or transmitter.CAUTION: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.The CR5000 has been tested for compliance to CE standards and guidelines and was found to conform to applicable CE standards:EN 55022: Class B Radiated Emissions, Class B Conducted EmissionsEN-61000-3-2 (Harmonic Current Measurement)EN 61000-3-3 (Voltage Flicker Measurement)EN 55024: EN 61000-4-2 (ESD), EN 61000-4-3 (Radiated RF Immunity), EN 61000-4-4 (Electrical Fast Transients), EN 61000-4-5 (Lightning Surge), EN 61000-4-6 (Conducted RF Immunity), EN 61000-4-8 (Power-Frequency Magnetic Field), EN 61000-4-11 (Voltage Dips and Interrupts)Code voids product warranty if the hard case has been opened or tampered with in any way.Copyright © 2015 Code Corporation.All Rights Reserved.The software described in this manual may only be used in accordance with the terms of its license agreement.No part of this publication may be reproduced in any form or by any means without written permission from Code Corporation. This includes electronic or mechanical means such as photocopying or recording in information storage and retrieval systems.NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a commitment on the part of Code Corporation. Code Corporation does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Code Corporation reserves the right to make changes in specications and other information contained in this document without prior notice, and the reader should in all cases consult Code Corporation to determine whether any such changes have been made. Code Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Code Corporation does not assume any product liability arising out of or in connection with the application or use of any product or application described herein.NO LICENSE. No license is granted, either by implication, estoppel, or otherwise under any intellectual property rights of Code Corporation. Any use of hardware, software and/or technology of Code Corporation is governed by its own agreement. The following are trademarks or registered trademarks of Code Corporation:CodeXML®, Maker, QuickMaker, CodeXML® Maker, CodeXML® Maker Pro, CodeXML® Router, CodeXML® Client SDK, CodeXML® Filter, HyperPage, CodeTrack, GoCard, GoWeb, ShortCode, GoCode®, Code Router, QuickConnect Codes, Rule Runner®, Cortex®, CortexRM, CortexMobile, Code®, Code Reader, CortexAG, CortexStudio, CortexTools®, Afnity®, and CortexDecoder®.All other product names mentioned in this manual may be trademarks of their respective companies and are hereby acknowledged.The software and/or products of Code Corporation include inventions that are patented or that are the subject of patents pending. A complete list of pantents are available at www.codecorp.com/legal/patents.php.The Code Reader software uses the Mozilla SpiderMonkey JavaScript engine, which is distributed under the terms of the Mozilla Public License Version 1.1. The Code Reader software is based in part on the work of the Independent JPEG Group.Code Corporation, 12393 S. Gateway Park Place, Ste. 600, Draper, Utah 84020www.codecorp.com
3D021992_03 CR5000 User ManualTable of Contents1.0 - Included Items ........................................................................................... 42.0 - Attaching and Detaching a Cable .................................................................. 53.0 - RS232 and USB Set Up .............................................................................. 54.0 - CRA-T500 Bluetooth Set Up ........................................................................ 65.0 - Using a CR5000 in Presentation Mode ......................................................... 76.0 - Using a CR5000 in Handheld Mode ............................................................ 77.0 - Reading Ranges .......................................................................................... 78.0 - Reader Feedback ........................................................................................ 89.0 - Symbologies Defaulted On ........................................................................... 810.0 - Symbologies Defaulted Off ......................................................................... 811.0 - Conguring a CR5000 ............................................................................... 912.0 - CR5000AV ............................................................................................... 913.0 - Reader ID & Firmware Version .................................................................... 914.0 - CR5000 Overall Dimensions .................................................................... 1015.0 - USB Cable Example with Pinouts ............................................................. 1016.0 - RS232 Cable Example with Pinouts .......................................................... 1117.0 - Reader Pinouts ....................................................................................... 1118.0 - CR5000 Maintenance ............................................................................. 1119.0 - Warranty ................................................................................................12
4D021992_03 CR5000 User Manual 1.0 - Included Items (if Ordered) CR5000 (Model #: CR5020 or CR5025)USB 2.0 Cable RS232 Cable5VDC Power SupplyCRA-T500Bluetooth CablePower Adapter
5D021992_03 CR5000 User Manual 2.0 - Attaching and Detaching a Cable 3.0 - RS232 and USB Set Up2x10 Sec.1Plug InWait 10 SecondsLED will FlashReader will Beep1234
6D021992_03 CR5000 User Manual4.0 - CRA-T500 Bluetooth Set Up2x123Bluetooth SettingsScanning for devices...The CRA-T500 cable has an embedded Bluetooth module that allows the CR5000 to connect to a tablet, smartphone, or other Bluetooth-enabled device. When the CR5000 is rst taken out of the box, plugged into the CRA-T500, and powered up, the Bluetooth module will be in discoverable mode, which means a host Bluetooth device may pair with the CR5000 by choosing “Code T500” from the list of available devices shown in the host device’s Bluetooth menu (typically under “Sengs”, but varies by device).By default, the CR5000 will connect using the HID Keyboard communicaon protocol. This will send scanned data to the applicaon that has focus on the host device as if the user was typing the data with a keyboard. The communicaon protocol can be changed using the conguraon codes located atwww.codecorp.com/congguide.For ghter integraon with iOS applicaons, an SDK is available on the Code website at www.codecorp.com/downloads.php.Bluetooth SettingsAvailable DevicesCode T500 Tap to Pair
7D021992_03 CR5000 User Manual5.0 - Using a CR5000 in Presentation Mode6.0 - Using a CR5000 in Handheld Mode10 cmJ NR M NR PM QR-15° 0° 15° 30° 45°7.0 - Reading RangesNote: Handheld working ranges are a combination of both the wide and high density elds. All samples were high quality barcodes and were read along a physical center line at a 10° angle. Default AGC settings were used. Accuracy= +/- 10%.CR5000 PerformancePresentation Mode (Default) Handheld ModeTest Barcode Min Inches (mm) Max Inches (mm) Min Inches (mm) Max Inches (mm)5.8mil PDF 0” (0 mm) 2.0” (50 mm) 0.4” (10 mm) 4” (100 mm)6.3mil DM 0” (0 mm) 2.4” (60 mm) 0.4” (10 mm) 4.5” (115 mm)6.6mil PDF 0.4” (10 mm) 2.6” (65 mm) 0.4” (10 mm) 4.5” (115 mm)10mil DM 0.4” (10 mm) 3.5” (90 mm) 0.4” (10 mm) 5.5” (140 mm)13mil UPC 0.4” (10 mm) 4.9” (125 mm) 0.4” (10 mm) 7.5” (190 mm)15 mil DM 0.4” (10 mm) 4.5” (115 mm) 0.4” (10 mm) 6.9” (175 mm)20mil DM 0.4” (10 mm) 6.1” (155 mm) 0.4” (10 mm) 8.0” (205 mm)
8D021992_03 CR5000 User Manual8.0 - Reader FeedbackScenario Top LED Light SoundCR5000 Successfully Powers Up 1xCR5000 Successfully Enumerates with Host (via cable) 1xAttempting to Decode NoneSuccessful Decode and Data Transfer 1xConguration Code Successfully Decoded and Processed 2xConguration Code Successfully Decoded but Wasn’t Successfully Processed 4x9.0 - Symbologies Defaulted On 10.0 - Symbologies Defaulted OffThe following are symbologies that have a default of ON. To turn symbologies on or off, scan the symbology barcodes located in the CR5000 Conguration Guide located at website at www.codecorp.com.Code barcode readers can read a number of barcode symbologies that are not enabled by default. To turn symbologies on or off, scan the symbology barcodes located in the CR5000 Conguration Guide located on our website at www.codecorp.com/les.php.Codabar Code 39 Code 93 Code 128 Data MatrixData Matrix RectangleAll GS1 DataBar Interleaved 2 of 5 MSI Plessy PDF417 QR Code UPC/EAN/JANCodablock F Code 11Code 32Code 49CompositeHan Xin CodeHong Kong 2 of 5IATA 2 of 5MaxicodeMatrix 2 of 5Micro PDF417MSI PlesseyNEC 2 of 5PharmacodePlesseyStandard 2 of 5TelepenTriopticPostal Codes
9D021992_03 CR5000 User Manual12.0 - CR5000AVThe CR5000AV (Model# CR5025) is stand-alone age verication solution that does not require a PC or manual management of data to alert a clerk of an underage patron. When reading an AAMVA-compliant barcoded Driver License, the CR5000AV is enabled by default to alert users if a patron is under the age of 21. The CR5000AV veries the age of a patron using its Real Time Clock (RTC) which is set during the manufacturing process. The RTC can be changed to reect local time, the primary minimum age setting can be changed, and a secondary age set with the online Conguration Generator found at www.codecorp.com/congguide, or with the CortexTools® utility that can be downloaded at www.codecorp.com/downloads.php. If you have questions about a specic Identication or Driver License, please contact support@codecorp.com.11.0 - Conguring a CR5000The online Conguration Guide Generator found at www.codecorp.com/congguide may be used to quickly congure a CR5000 to desired settings.Xap/i06760456none0020094903A0600000070007001500540002o cd(12.3.2)13.0 - Reader ID and Firmware VersionA text string indicating the rmware version and CR5000 ID number will be displayed.example: Xap/i06760456none0020094903A0600000070007001500540000ocd(12.3.2)(see below):To nd out the Reader ID and rmware version, open a text editor program (i.e., Notepad, Microsoft Word, etc.) and read the Reader ID and Firmware conguration barcode:Reader ID and FirmwareNote: Code will periodically release new rmware for CR5000 readers. For information on latest rmware visit our website at www.codecorp.com/codesupport.php.Firmware versionBoot firmware versionRadio firmware versionReader serial number (ten digits)Current execution stateString outputOEM IdentifierDisplay TypeFlash File System VersionHardware RevisionHardware Type IdentifierBoot Application VersionOperating System Kernel VersionRoot File System VersionASCII TAB CharacterDecoder Version
10D021992_03 CR5000 User Manual14.0 - CR5000 Overall Dimensions3.55"(90.30 mm)2.80"(71.23 mm)5.95"(151.14 mm)15.0 - USB Cable Example with PinoutsNOTES:1. Part to be ROHS and Reach compliant. 2. Maximum Voltage Tolerance = 5V +/- 10%. 3. Caution: Exceeding the maximum voltage will void manufacturer warranty.CONNECTOR A CONNECTOR BCONNECTOR A NAME WIRE COLOR CONNECTOR B1 VIN 24AWG RED 12 DM 26AWG WHITE 23 DP 26AWG GREEN 34 GND 24AWG BLACK 10SHELL - SHIELD BARE SHELL
11D021992_03 CR5000 User Manual17.0 - Reader PinoutsThe connector on the CR5000 is an RJ-50 (10P-10C). The pinouts are as follows:Pin 1 +VIN (5v) Pin 6 RS232 RX (input to reader)Pin 2 USB_DM Pin 7 RS232 CTS (input to reader)Pin 3 USB_DP Pin 8 Reserved for EASPin 4 RS232 TX (output from reader) Pin 9 Reserved for EASPin 5 RS232 RTS (output from reader) Pin 10 Ground16.0 - RS232 Cable Example with PinoutsNOTES:1. Part to be ROHS and Reach compliant. 2. Maximum Voltage Tolerance = 5V +/- 10%. 3. Caution: Exceeding the maximum voltage will void manufacturer warranty.CONNECTOR A NAME WIRE COLOR CONNECTOR B WIRE COLOR CONNECTOR C9* VIN 24AWG RED 1 24AWG RED 12 TX 26AWG BROWN 48RTS 26AWG ORANGE 53 RX 26AWG YELLOW 67 CTS 26AWG GREEN 75 GND 24AWG BLACK 10 24AWG BLACK 2SHELL DRAINCONNECTOR A CONNECTOR BCONNECTOR C*Diode on Pin 9 of Connector A prevents back-powering of host.18.0 - CR5000 MaintenanceThe CR5000 device needs only a minimum of maintenance to operate. A few tips are given below for maintenance suggestions. Cleaning the CR5000 WindowCR5000 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of the reader. Do not touch the window. Your CR5000 uses CMOS technology that is much like a digital camera. A dirty window may stop the CR5000 from reading barcodes. If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives) that has been moistened with water. Technical Support and ReturnsFor returns or technical support visit www.codecorp.com/codesupport.php.
12D021992_03 CR5000 User Manual19.0 - Warranty*The CR5000 carries a standard three year limited warranty as described herein. Cables have a 30 day warranty period.Limited Warranty. Code warrants each Code product against defects in materials and workmanship under normal use for the Warranty Coverage Term applicable to the product as described at www.codecorp.com/legal/warranty/term.php. If a hardware defect arises and a valid warranty claim is received by Code during the Warranty Coverage Term, Code will either: i) repair a hardware defect at no charge, using new parts or parts equivalent to new in performance and reliability; ii) replace the Code product with a product that is new or refurbished product with equivalent functionality and performance, which may include replacing a product that is no longer available with a newer model product; or ii) in the case of failure with any software, including embedded software included in any Code product, provide a patch, update, or other work around. All replaced products become the property of Code. All warranty claims must be made using Code’s RMA process.Exclusions. This warranty does not apply to: i) cosmetic damage, including but not limited to scratches, dents, and broken plastic; ii) damage resulting from use with non-Code products or peripherals, including batteries, power supplies, cables, and docking station/cradles; iii) damage resulting from accident, abuse, misuse, ood, re or other external causes, including damage caused by unusual physical or electrical stress, immersion in uids or exposure to cleaning products not approved by Code, puncture, crushing, and incorrect voltage or polarity; iv) damage resulting from services performed by anyone other than a Code authorized repair facility; v) any product that has been modied or altered; vi) any product on which the Code serial number has been removed or defaced. If a Code Product is returned under a warranty claim and Code determines, in Code’s sole discretion, that the warranty remedies do not apply, Code will contact Customer to arrange either: i) repair or replace the Product; or ii) return the Product to Customer, in each case at Customer’s expense.Non Warranty Repairs. Code warrants its repair/replacement services for ninety (90) days from the date of shipment of the repaired/replacement product to the Customer. This warranty applies to repairs and replacements for: i) damage excluded from the limited warranty described above; and ii) Code Products on which the limited warranty described above has expired (or will expire within such ninety (90) day warranty period). For repaired product this warranty covers only the parts that were replaced during the repair and the labor associated with such parts.No Extension of Term of Coverage. Product that is repaired or replaced, or for which a software patch, update, or other work around is provided, assumes the remaining warranty of the original Code Product and does not extend the duration of the original warranty period.Software and Data. Code is not responsible for backing up or restoring any of software, data, or conguration settings, or reinstalling any of the foregoing on products repaired or replaced under this limited warranty.Shipping and Turn Around Time. The estimated RMA turn-around time from receipt at Code’s facility to shipment of the repaired or replaced product to Customer is ten (10) business days. An expedited turn-around time may apply to products covered under certain CodeOne Service Plans. Customer is responsible for shipping and insurance charges for shipping Code Product to Code’s designated RMA facility and repaired or replaced product is returned with shipping and insurance paid by Code. Customer is responsible for all applicable taxes, duties, and similar charges.Transfer. If a customer sells a covered Code Product during the Warranty Coverage Term, then that coverage may be transferred to the new owner by written notication from the original owner to Code Corporation at:CodeOne Service Center 12393 South Gateway Park Place, Suite 600 Draper, UT 84020Limitation on Liability. Code’s performance as described herein shall be Code’s entire liability, and the Customer’s sole remedy, resulting from any defective Code product. Any claim that Code has failed to perform its warranty obligations as described herein must be made within six (6) months of the alleged failure. Code’s maximum liability related to its performance, or failure to perform, as described herein shall be limited to the amount paid by Customer for the Code product that is subject to the claim. In no event will either party be liable for any lost prots, lost savings, incidental damage, or other economic consequential damages. This is true even if the other party is advised of the possibility of such damages.EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE LIMITED WARRANTIES DESCRIBE HEREIN REPRESENT THE ONLY WARRANTIES CODE MAKES WITH RESPECT TO ANY PRODUCT. CODE DISCLAIMS ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.THE REMEDIES DESCRIBED HEREIN REPRESENT CUSTOMER’S EXCLUSIVE REMEDY, AND CODE’S ENTIRE RESPONSIBILITY, RESULTING FROM ANY DEFECTIVE CODE PRODUCT. CODE SHALL NOT BE LIABLE TO CUSTOMER (OR TO ANY PERSON OR ENTITY CLAIMING THROUGH CUSTOMER) FOR LOST PROFITS, LOSS OF DATA, DAMAGE TO ANY EQUIPMENT WITH WHICH THE CODE PRODUCT INTERFACES (INCLUDING ANY MOBILE TELEPHONE, PDA, OR OTHER COMPUTING DEVICES), OR FOR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR IN ANY MANNER CONNECTED WITH THE PRODUCT, REGARDLESS OF THE FORM OF ACTION AND WHETHER OR NOT CODE HAS BEEN INFORMED OF, OR OTHERWISE MIGHT HAVE ANTICIPATED, THE POSSIBILITY OF SUCH DAMAGES.*North America Warranty Period.
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu