Cobra Electronics CXT400 FRS/GMRS TRANSCEIVER User Manual 3500

Cobra Electronics Corporation FRS/GMRS TRANSCEIVER 3500

Users Manual

Nothing Comes Close to a Cobra®EnglishFor more information or toorder any of our products,please visit our website:www.cobra.comA1Making Life Easier and SaferOwner’s ManualNothing Comes Close to a Cobra®TWO-WAY RADIO MODELCXT400Printed in ChinaPart No. 480-468-PVersion AIntroductionStaying in touch with your family and friends isconvenient and easy when using your microTALK®radio. Some of the many uses you will discover include:Communicating with others while hiking, biking and working;keeping track of family and friends at a crowded public event;checking with travel companions in another car; talking withneighbors; arranging meeting spots with others whileshopping at the mall.Secure your microTALKradio while on the go.Carrying your microTALK radio withyou is easy when using the belt clip.The belt clip easily attaches to your belt,purse or backpack.For Assistance in the U.S.A.In this user’s manual, you should find all the information you needto operate your microTALK radio. If you require further assistanceafter reading this manual, Cobra Electronics offers the followingcustomer assistance services:Automated Help DeskEnglish only. 24 hours a day, seven (7) days a week773-889-3087 (phone).Customer Assistance OperatorsEnglish and Spanish. 8:00 a.m. to 6:00 p.m. Central Time,Monday through Friday (except holidays) 773-889-3087 (phone).QuestionsEnglish and Spanish. Faxes can be received at 773-622-2269 (fax).Technical AssistanceEnglish only. www.cobra.com (on-line: Frequently Asked Questions).English and Spanish. productinfo@cobra.com (e-mail).For Assistance Outside the U.S.A.Contact Your Local DealerBelt ClipCustomer Assistance©2008 Cobra Electronics Corporation™6500 West Cortland StreetChicago, Illinois 60707 USAwww.cobra.com
A3Product FeaturesA2Product FeaturesIntroduction IntroductionBacklit LCD Display•22 ChannelsSeven sharedwith FRS/GMRS,seven FRSonly, eightGMRS only•121 Privacy Codes(38 CTCSS codes/83 DCS codes)•10 Channel NOAAAll Hazards Radio•Hands-FreeOperation (VOX)•10 Channel Memory•Signal StrengthMeter•ScanChannels, privacycodes, memory•SelectableHi•Low PowerIn GMRS•BacklitLCD Display•Button Lock•Call Alert10 selectable tones•Speaker/Microphone/Charge Jack•Roger BeepSelectable on/off•Battery/Power Saver•Keystroke TonesSelectable on/off•Auto Squelch•Maximum RangeExtender•Belt Clip1238457610111291. Antenna2. External Speaker/Microphone/Charge Jack3. On/Off Volume Knob4. Backlit LCD Display5. Channel Up Button6. Channel Down Button7. Mode/Lock Button8. Speaker/Microphone9. Call Button10. Light/Max Range Button11. Talk Button12. Enter/Hi-Low Power Button13. Wrist Strap Connector14. Belt Clip15. Battery Compartment16. Battery Door Latch1234691012141516 111358131415167Important FCC Licensing InformationThis radio operates on General Mobile RadioService (GMRS) frequencies which require aFederal Communications Commission (FCC)license. See page 22 for licensing and otherrelated information.Maximum range may vary and is based onunobstructed line-of-sight communication underideal conditions.1. Signal Strength Meter Icon2. Lock Icon3. Keystroke Tones Icon4. Roger Beep Icon5. VOX Icon6. NOAA All Hazards Radio Icon7. DCS/CTCSS Icons8. Scan Icon9. Memory Icon10. Memory Location Number11. Privacy Code Numbers12. Hi-Low Power Icons13. Receive/Transmit Icons14. Battery Low Indicator15. Power Saver Icon16. Channel NumbersSafety and TrademarkAcknowledgementSafetySafety Information for microTALK®Radios •Your wireless handheld portable transceiver contains a low powertransmitter. When the talk button is pushed, it sends out radiofrequency (RF) signals. The device is authorized to operate at a dutyfactor not to exceed 50%. In August 1996, the FederalCommunications Commission (FCC) adopted RF exposure guidelineswith safety levels for handheld wireless devices.Important:FCC RF Exposure Requirements: For body-worn operation, this radiohas been tested and meets the FCC RF exposure guidelines when usedwith Cobra accessories supplied or designated for this product. Use ofother accessories may not ensure compliance with FCC RF exposureguidelines. Use only the supplied antenna. Unauthorized antennas,modifications, or attachments could damage the transmitter and mayviolate FCC regulations.Normal Position:Hold the transmitter approximately five cm (two inches) from your faceand speak in a normal voice, with the antenna pointed up and away.Trademark Acknowledgement •Cobra®, microTALK®, Nothing Comes Close to a Cobra®, VibrAlert®and the snake design are registered trademarks of Cobra ElectronicsCorporation, USA. Cobra Electronics Corporation™ is a trademarkof Cobra Electronics Corporation, USA.The Cobra line of quality products includes •CB Radios • microTALK®Radios • Radar/Laser Detectors •Safety Alert®Traffic Warning Systems • HighGear®Accessories •CobraMarine®VHF Radios • Marine Chartplotters •Power Inverters • Accessories25
OperationCustomer AssistanceWarranty1IntroductionCaring for Your microTALK Radio •Your microTALK radio will give you years of trouble-free serviceif cared for properly. Handle the radio gently. Keep the radio awayfrom dust. Never put the radio in water or in a damp place.Avoid exposure to extreme temperatures.Rechargeable Batteries andDesktop Charger •To install or replace batteries:1. Remove belt clip by releasing belt cliplatch and sliding clip up.2. Pull up on the battery door latch toremove the battery compartment cover.3. Insert batteries according topolarity markings.4. Replace battery compartment coverand belt clip.Estimated operation time on full charge: 12 hours.These rechargeable batteries must be recycled or disposed ofproperly in compliance with all applicable laws. They may not bethrown in the trash.Certain states or municipalities require recycling and haveestablished collection programs. Please contact your local wasteremoval authority for instructions, or return to Cobra®for recycling.Wrap batteries carefully and mail postage prepaid to:Cobra Electronics Corporation™, 6500 West Cortland Street,Chicago, IL 60707 USA, Attn: Battery Recycling.Do not put batteries into fire or expose to high heat.They may explode.Remove Belt ClipPull Up Lock LatchInsert Batteries
Turning on Your microTALK Radio •Rotate the On/Off Volume knob clockwise to turnon your radio and adjust the volume. A seriesof tones will indicate the radio is on.Your microTALK radio is now in Standby mode,ready to receive transmissions. The radio isalways in Standby mode, except when the Talk,Call or Mode/Lock buttons are pressed.Battery Low •When battery power is low, the Battery Low iconwill blink. Your batteries should be recharged orreplaced if using alkaline batteries.Auto Battery Save •Your microTALK radio has a unique circuitdesigned to extend battery life. If there areno transmissions for 10 seconds, the radio willautomatically switch to Battery Save mode andthe Power Saver icon will flash in the display.This will not affect the radio’s ability to receiveincoming transmissions.Communicating with Another Person •1. Press and hold the Talk button.2. With the microphone about 2 inches(5 cm) from your mouth, speak in anormal voice.3. Release the Talk button when you arefinished talking and listen for a response.You cannot receive incoming calls whilepressing the Talk button.Both radios must be tuned tothe same channel/privacy codeto communicate.Customer Assistance WarrantyIntroduction3Operation2Using Your RadioOperationFor charging microTALK radio(s) in desktopcharger:1. Insert radio(s) into desktop charger as shown.2. Insert round connector of 120-volt adapterinto jack on back of charger.3. Plug 120-volt adapter into electrical outlet.If charging light is not on, check position of radio. Radio should beupright. The charge indicator light will stay on as long as the radiois in the charging well, even after the batteries are fully charged.It normally takes about 15 hours to fully recharge batteries.Batteries will not be damaged if they stay in the charging welllonger than that.Note: To charge a single radio, you can bypass the desktop chargerand simply insert the wall adapter’s round connector directly intothe speaker/microphone/charge jack located on the top of the radio.Use only the supplied rechargeable batteries and charger forrecharging your Cobra microTALK radio.Cobra recommends your radio is turned off while being charged.Non-rechargeable alkaline batteries can also be used in your radio.Battery LowBattery Save ModeOn/Off PowerInsert Radio(s)Quick Start1. Rotate the On/Off Volume knob to turnon your radio.2. Press the Channel Up or Channel Downbutton to select a channel.Both radios must be tuned tothe same channel/privacy codeto communicate.3. Press and hold the Talk button whilespeaking into the microphone.4. When finished talking, release the Talkbutton and listen for a response.Two Inches (5 cm)from MouthTalk Button
Customer Assistance WarrantyIntroduction5Operation4Using Your RadioOperationChannel NumberEnter/Hi-Low ButtonChannel ButtonsHi Power IconLow Power IconLight/Max RangeListeningChannels •With the radio on, select any of the 22 channelsby pressing the Channel Up or Channel Downbutton.Both radios must be tuned to thesame channel to communicate.Channels 1 through 7 are shared by FRS andGMRS. Channels 8 through 14 are FRS only.Channels 15 through 22 are GMRS only.See page 21 for FRS/GMRS frequencyallocations and compatibility charts.Listening for a Response •Release the Talk button to receive incomingtransmissions. Your microTALK radio is alwaysin Standby mode while the Talk or Call buttonsare not pressed.Volume •Rotate the On/Off Volume knob.Call Button •To alert another person that you are calling:Press and release the Call button.The other person will hear a two secondcall tone. This tone is used only to establishvoice communications.See page 19 on how to select from10 available call tone settings.Selectable High•Low Power Output •When in close proximity to another party orduring favorable conditions, you can switchfrom High to Low Power to extend battery life.This feature applies to GMRS Channels1 through 7 and 15 through 22 only.Channels 8 through 14 operateexclusively on low power.To toggle between high and low power:Press the Enter/Hi•Low button fortwo seconds.When using Channels 1 through 7 and15 through 22 on high power, the Hi iconwill be visible on the display.When using those channels on low powerand on Channels 8 through 14, the Low iconwill be visible on the display.To Illuminate Display •Press and release the Light/Max Range buttonto illuminate the display for 10 seconds.Auto Squelch/Maximum Range •Your microTALK radio is equipped with Auto Squelch, whichautomatically shuts off weak transmissions and unwanted noisedue to terrain and conditions. This slightly reduces the MaximumRange at which signals can be heard.You can turn off auto squelch to allow all signals to be receivedand extend the maximum range of your radio.Volume KnobCall Button
Speaker/Microphone/Charge Jack •Your microTALK radio can be fitted with an external Speaker/Microphone,freeing your hands for other tasks. This same jack also serves asthe connecting point for a wall charger/adapter.To attach a speaker/microphone:1. Open the speaker/microphone/chargetab on top of your microTALK radio.2. Insert the plug into the speaker/microphone/charge jack.To connect a wall charger/adapter:1. Open the speaker/microphone/chargetab on top of your microTALK radio.2. Insert the wall charger/adapter pluginto the speaker/microphone/charge jack.Signal Strength Meter •Your microTALK radio has a Signal StrengthMeter that shows the strength of your incomingand outgoing transmissions. The ascending barsnext to the signal strength indicate the strengthof the signal. The greater the number of barsvisible, the stronger the signal. The fewernumber of bars visible, the weaker the signal.microTALK Range •Your range will vary depending onterrain and conditions.In flat, open country your radio willoperate at maximum range.Buildings and foliage in the path of thesignal can reduce the range of the radio.Dense foliage and hilly terrain willfurther reduce the range of the radio.On FRS channels 8 through 14, your radioautomatically switches to low power, whichwill limit the range the radio can communicate.Remember, you can achieve maximumrange by using maximum rangeextender. See page 6 for details.To briefly turn off auto squelch:Press the Light/Max Range buttonfor less than five seconds.If you hear two beeps, you have turnedthe maximum range extender on (see below).To turn maximum range extender on:Press and hold the Light/Max Range buttonfor at least five seconds until you heartwo beeps which indicates the maximumrange extender is on.To turn maximum range extender off:Press and release the Light/Max Rangebutton or change channels.Lock Feature •The Lock feature locks the Channel,Mode/Lock and Enter/Hi•LowPower buttons to prevent accidental operation.To turn the lock feature on or off:Press and hold the Mode/Lock buttonfor two seconds.A double beep sound is used to confirm yourlock on or off request. When in Lock mode,the Lock icon will be displayed.Dual Function ButtonsTwo of the buttons on the microTALK radio have Dual Functions;Mode/Lock• Press and release the button to scroll to the next mode function.• Press and hold the button for two seconds or more to turn thelock function on or off.Enter/Hi•Low Power• Press and release the button to enter settings in Function mode.• Press and release to toggle between high and low powertransmission in Standby mode.Customer Assistance WarrantyIntroduction7Operation6Using Your RadioOperationLight/Max RangeLock ModeSpeaker/Microphone/Charge JackSignal StrengthMode/Lock ButtonMaximum RangeReduced RangeReduced Range
Customer Assistance WarrantyIntroduction9Operation8Mode FunctionsOperationCTCSS Privacy CodeChannel ButtonsMode/Lock ButtonMode/Lock ButtonSet CTCSS Privacy Codes •To select a CTCSS privacy code:1. After selecting a channel, pressthe Mode/Lock button until the smallnumbers next to the channel numberflash on the display.If DCS is turned on at the channelselected, the display will flash theCTCSS icon and “OFF.” To switch fromDCS to CTCSS, press the Channel Upor Channel Down button while thedisplay is flashing “OFF.” The displaywill then show the small numbersflashing and you will then be ableto proceed to step 2.2. Press using the Channel Up or Channel Downbutton to select a privacy code. You can holdthe Up or Down button for fast advance.3. When your desired CTCSS privacy code isdisplayed, choose one of the following:a. Press the Mode/Lock button to enter thenew setting and proceed to other functions.b. Press the Enter/Hi•Low button to enter thenew setting and return to Standby mode.c. Do not press any buttons for 15 secondsto enter the new setting and return toStandby mode.Scrolling through Mode Functions •By scrolling through the Mode Functions, you will be able toselect or turn on/off preferred features of your microTALK radio.When scrolling through the Mode Functions, your radio featureswill be displayed in the following order:Set CTCSS Privacy CodesSet DCS Privacy CodesSet NOAA All Hazards Radio ChannelSet VOX On/OffSet VOX Sensitivity LevelSet Memory LocationsSet Channel ScanSet CTCSS Privacy Code ScanSet DCS Privacy Code ScanSet Memory Location ScanSet Call TonesSet Roger Beep On/OffSet Keystroke Tones On/OffScroll through the mode functions using the Mode/Lock button.Each press and release of the Mode/Lock button will advance tothe next mode function. Press the Talk button at any point toreturn the radio to Standby mode.Privacy Codes •Your microTALK radio incorporates two advanced coded squelchsystems that can help to reduce interference from other userson any given channel. CTCSS (Continuous Tone Coded SquelchSystem) provides 38 privacy codes and DCS (Digitally CodedSquelch) provides 83 privacy codes. This provides a total of 121Privacy Codes. Either system can be used on all channels, but bothsystems cannot be used on the same channel at the same time.To successfully communicate using a privacy code, boththe sending and receiving radios must be tuned to the samechannel and to the same privacy code system (CTCSS orDCS) and privacy code number. Each channel will rememberthe last privacy code system and number you select.The privacy code 00 is not a privacy code, but allows allsignals to be heard on a channel that is set to 00 on boththe CTCSS and DCS systems.
Customer Assistance WarrantyIntroduction OperationVoice Activated Transmit (VOX) •In VOX mode, your microTALK radio can be used “hands-free,”automatically transmitting when you speak. You can set the VOXsensitivity level to fit the volume of your voice and avoidtransmissions triggered by background noise.To turn VOX mode on or off:1. Press the Mode/Lock button until the VOXicon flashes on the display. The current onor off setting is displayed.2. Press the Channel Up or Channel Downbutton to turn VOX on or off.3. Choose one of the following:a. Press the Mode/Lock button to enter theselected on or off setting and proceed toother functions.b. Press the Enter/Hi•Low button to enterthe selected on or off setting and returnto Standby mode.To set VOX sensitivity:1. Press the Mode/Lock button until the VOXicon flashes and the current sensitivity levelis displayed.10Mode FunctionsOperation11NOAA* All Hazards Radio Channels •You can use your microTALK radio to listen to NOAA All HazardsRadio channels transmitting in your area.To listen to All Hazards Radio channels:1. Press the Mode/Lock button until theAll Hazards Radio icon, the currentlyselected All Hazards Radio channel,and signal strength are displayed.2. Use the Channel Up or Channel Downbutton to change All Hazards Radio channels.VOX IconChannel ButtonsMode/Lock ButtonMode/Lock ButtonSet DCS Privacy Codes •To select a DCS privacy code:1. After selecting a channel, press the Mode/Lockbutton until the DCS icon appears and thesmall numbers flash on the display(01 through 83).2. Press using the Channel Up or Channel Downbutton to select a DCS privacy code. You canhold the Up or Down button for fast advance.3. When your desired DCS privacy code isdisplayed, choose one of the following:a. Press the Mode/Lock button to enter thenew setting and proceed to other functions.b. Press the Enter/Hi•Low button to enter thenew setting and return to Standby mode.c. Do not press any buttons for 15 secondsto enter the new setting and return toStandby mode.3. The All Hazards Radio icon will continue tobe displayed when All Hazards Radio is on.Choose one of the following:a. Press the Mode/Lock button to proceedto other functions.b. Press the Enter/Hi-Low button to exitAll Hazards Radio channel mode andreturn to Standby mode.c. Press Talk button to exit and start onlast used transmitting channel.*National Oceanographic and Atmospheric AdministrationEnter/Hi-Low ButtonChannel ButtonsChannel ButtonsMode/Lock ButtonDCS Privacy CodeIf CTCSS is turned on at the channelselected, the display will flash the DCSicon and “OFF.” To switch from CTCSS toDCS, press the Channel Up or ChannelDown button while the display is flashing“OFF.” The display will then show thesmall numbers flashing and you will thenbe able to proceed to step 2.Hazards Radio Icon
Memory IconChannel ButtonsMode/Lock ButtonEnter/Hi-Low ButtonCustomer Assistance WarrantyIntroduction Operation12Mode FunctionsOperation6. Choose one of the following:a. Press the Channel Up or Channel Down button to selecta CTCSS privacy code (01 through 38) for the channel.b. Press the Enter/Hi•Low button to switch from CTCSS toDCS. The DCS icon and privacy code numbers will flash onthe display. The Channel Up or Channel Down button canthen be used to select a DCS privacy code (01 through 83)for the channel.If “OFF” flashes in place of the privacy code numbers,a privacy code is already set in the opposite (CTCSSor DCS) system. Press the Channel Up or Channel Downbutton to cancel the opposite code and select a privacycode from the active system for the selected channel.7. Choose one of the following:a. Press the Enter/Hi•Low button to enter the channel/privacycode in the selected memory location. Radio then proceedsto next memory location, which will blink.b. Press the Mode/Lock button to enter the channel/privacycode in the selected memory location and proceed to otherfunctions on the channel/privacy code displayed before youentered mode functions.c. Press the Talk button to enter the channel/privacy codein the selected memory location and exit mode functions.Upon release of the Talk button, the radio will enterStandby mode on the channel/privacy code just entered.To recall a stored memory channel location:1. Press the Mode/Lock button until the Memoryicon and the memory location number flashon the display.2. Press the Channel Up or Channel Downbutton to select a memory location(0 through 9).If a location has been programmedbefore, its associated channel/privacycode will be shown on the display.13The current sensitivity level is displayedwith letters “LE” and a Number 01through 05, with Number 05 being themost sensitive level and Number 01being the least sensitive level.2. Press the Channel Up or Channel Downbutton to change the setting.3. Choose one of the following:a. Press the Mode/Lock button to enterthe selected setting and proceed toother functions.b. Press the Enter/Hi•Low button toenter the selected setting and returnto Standby mode.10 Memory Locations •Your microTALK radio has 10 Memory Locations for storingyour most frequently used channels and channel/privacy codecombinations. These Memory Locations can be selected individuallyor can be scanned. (See page 18 for memory location scan.)To program a memory location:1. Press the Mode/Lock button until theMemory icon and the Memory Locationflash on the display.2. Press the Channel Up or Channel Downbutton to select the memory location(0 through 9).If a location has been programmedbefore, its associated channel/privacycode will be shown on the display.3. Press the Enter/Hi•Low button to entera new memory location or edit an alreadyprogrammed memory location. The channelnumbers will flash on the display.4. Press the Channel Up or Channel Downbutton to select a channel (1 through 22).5. Press the Enter/Hi•Low button. The CTCSSicon and privacy code numbers will flash onthe display.VOX Sensitivity LevelChannel ButtonsMode/Lock ButtonMemory IconMode/Lock Button
Customer Assistance WarrantyIntroduction15Operationb. Press the Mode/Lock button to enter the channel/privacycode in the selected memory location and proceed to otherfunctions on the channel/privacy code displayed before youentered mode functions.While de-programming a memory location, if you do not pressany buttons for 15 seconds, your radio will automatically returnto Standby mode on the channel/privacy code displayed beforeyou entered mode functions.Channel Scan •Your microTALK radio can automatically scan channels.To scan channels:1. Press the Mode/Lock button until theScan icon and the channel numbersflash on the display.2. Press the Channel Up or Channel Downbutton to begin scanning channels.The radio ignores specific privacycodes while scanning channels.The Scan icon will continue to be displayedwhen scan is on. Your radio will continue toscan all channels and stop if an incomingtransmission is detected. Your radio willremain on that channel for 10 seconds.While setting channel scan, if you do not press any buttons for15 seconds, your radio will automatically return to Standby modeon the channel or channel/privacy code displayed before youentered mode functions.During channel scan (while receiving an incoming transmission),you can choose from the following:a. Press and hold the Talk button to communicate on thatchannel. Your radio will remain on that channel and returnto Standby mode.b. Press the Channel Up or Channel Down button to resumescanning channels.14Mode Functions3. Press the Talk button to return to Standbymode on the selected memory location.A memory location can be reprogrammedat any time it is displayed. Press theEnter/Hi•Low button to begin.While recalling a stored memory location, if you do not pressany buttons for 15 seconds, your radio will automatically returnto Standby mode on the channel/privacy code displayed beforeyou entered mode functions.To de-program a memory location:1. Press the Mode/Lock button until theMemory icon and the memory locationflash on the display.2. Press the Channel Up or Channel Downbutton to select the memory location(0 through 9).If a location has been programmedbefore, its associated channel/privacycode will be shown on the display.3. Press the Enter/Hi•Low button. The channelnumbers will flash on the display.4. Press the Channel Up or Channel Downbutton to select Channel 0.5. Choose one of the following:a. Press the Enter/Hi•Low button to enterthe channel/privacy code in the selectedmemory location and return to thebeginning of memory location options.OperationChannel ButtonsMemory IconEnter/Hi-Low ButtonChannel 0Channel ButtonsMode/Lock ButtonScanning ChannelsMode/Lock ButtonChannel Buttons
If you press the Talk button while scanning, but more than 10seconds after receiving a transmission, you will transmit on thechannel on which you last received a transmission. This will returnthe radio to Standby mode.If you do not press any button within 10 seconds after receivinga scanned transmission, your radio will automatically resumescanning channels.During channel scan (while not receiving a transmission),you can choose from the following:a. Press and hold the Talk button to communicate on thechannel or channel/privacy code that was displayed beforeyou entered mode functions or the channel on which, duringscanning, you last received a transmission. This will thenreturn the radio to Standby mode.b. Press the Mode/Lock button to proceed to set privacycode scan on the channel that was either displayed beforeyou entered mode functions or on which, during channelscanning, you last received a transmission (see below forfurther details).c. Press the Enter/Hi•Low button to return to Standby modeon the channel/privacy code that was displayed before youentered mode functions or the channel on which, duringscanning, you last received a transmission.Privacy Code Scan •Your microTALK radio can automatically scan the PrivacyCodes (either CTCSS 01 through 38 or DCS 01 through 83)within one channel. Only one set of privacy codes (CTCSSor DCS) can be scanned at a time.To scan privacy codes:1. While in Standby mode, press theChannel Up or Channel Down buttonto choose the channel on which youwish to scan privacy codes.2. Press the Mode/Lock button until either theCTCSS or the DCS icon appears on thedisplay and the Scan icon and the privacycode numbers flash on the display.3. Press the Channel Up or Channel Downbutton to begin scanning privacy codeswithin the channel you selected.The Scan icon will continue to be displayedwhen privacy code scan is on. Your radio willcontinue to scan privacy codes and stop as anincoming transmission is detected. Your radiowill remain on that channel/privacy code for10 seconds.While setting privacy code scan, if you do not press any buttonsfor 15 seconds, your radio will automatically return to Standbymode on the channel/privacy code that was displayed before youentered mode functions.During privacy code scan (while receiving an incomingtransmission), you can choose from the following:a. Press and hold the Talk button to communicateon that channel/privacy code. Your radio will remainon that channel/privacy code and return to Standby mode.b. Press the Channel Up or Channel Down button toresume scanning privacy codes.If you press the Talk button while scanning, but more than10 seconds after receiving a transmission, you will transmiton the channel/privacy code on which you last received atransmission. This will then return the radio to Standby mode.If you do not press any button within 10 seconds, yourradio will automatically resume scanning privacy codes.During privacy code scan (while not receiving a transmission),you can choose from the following:a. Press and hold the Talk button to communicate onthe channel/privacy code that was displayed before youentered mode functions or the channel/privacy code onwhich, during scanning, you last received a transmission.This will return the radio to Standby mode.b. Press the Mode/Lock button to proceed to set memorylocation scan (see page 18 for further details).Customer Assistance WarrantyIntroduction17Operation16Mode FunctionsOperationScan Privacy CodesChannel ButtonsSelect ChannelMode/Lock Button
Customer Assistance WarrantyIntroduction19Operation18Mode Functionsc. Press the Enter/Hi•Low button to return to Standbymode on the channel/privacy code that was displayedbefore you entered mode functions or the channel/privacy code on which, during scanning, you lastreceived a transmission.Memory Location Scan •Your microTALK radio can automatically scan up to10 programmed Memory Locations.If there are one or fewer memory locationsprogrammed in your radio, the scan memorylocations option will not be available. To programat least two memory locations, see programmemory locations on page 12.To scan memory locations:1. Press the Mode/Lock button until the Scanicon, Memory icon and the memory locationnumber flash on the display.2. Press the Channel Up or Channel Downbutton to begin scanning memory locations.The Scan icon and the Memory icon willcontinue to be displayed when memorylocation scan is on. Your radio will continueto scan memory locations and stop if anincoming transmission is detected. Yourradio will remain on that memory locationfor 10 seconds.While setting memory location scan, if you do not press anybuttons for 15 seconds, your radio will automatically returnto Standby mode on the channel/privacy code displayed beforeyou entered mode functions.During memory location scan (while receiving an Incomingtransmission), you can choose from the following:a. Press and hold the Talk button to communicate on thatmemory location. Your radio will remain on that memorylocation and after 10 seconds of no activity, radio will startmemory location scan again.b. Press the Channel Up or Channel Down button to resumescanning memory locations.If you press the Talk button while scanning, but more than10 seconds after receiving a transmission, you will transmit onthe memory location on which, during scanning, you last receiveda transmission. This will return the radio to Standby mode.If you do not press any button within 10 seconds, your radiowill automatically resume scanning memory locations.During memory location scan (while not receiving atransmission), you can choose from the following:a. Press and hold the Talk button to communicate on thechannel/privacy code that was displayed before you enteredmode functions or memory location on which, duringscanning, you last received a transmission.b. Press the Mode/Lock button to proceed to other functions.c. Press the Enter/Hi•Low button to return to Standby modeon the channel/privacy code that was displayed before youentered mode functions or the memory location on which,during scanning, you last received a transmission.To reduce the number of memory locations being scanned,you may de-program any unwanted locations. (See page 14to de-program a memory location.)10 Call Tone Settings •You can choose from 10 different call tone settings to transmita unique call alert.To change a call tone setting:1. Press the Mode button until the letter “C” andthe current call tone number (01 through 10)is displayed.2. Press the Channel Up or Channel Downbutton to hear the other call tone settings.3. Choose one of the following:a. Press the Mode/Lock button to enter thenew setting and proceed to other functions.b. Press the Enter/Hi•Low button to enter thenew setting and return to Standby mode.OperationScanning LocationsChannel ButtonsMode/Lock ButtonCall Tone SettingChannel ButtonsMode/Lock Button
Roger Beep Confirmation Tone •Roger Beep is an audible tone that your listener will hear whenyou release the Talk button. This alerts the other party that youare finished talking and it is OK for them to speak.To turn roger beep on or off:1. Press the Mode button until the Roger Beepicon flashes on the display. The current onor off setting is displayed.2. Press the Channel Up or Channel Downbutton to select roger beep on or off.3. Choose one of the following:a. Press the Mode/Lock button to enterthe new setting and proceed to otherfunctions.b. Press the Enter/Hi•Low button to enter thenew setting and return to Standby mode.Keystroke Tones •With Keystroke Tones turned on, your radio will sound beepseach time you press a button or change a setting.To change keystroke tones:1. Press the Mode/Lock button until theKeystroke Tones icon flashes on the display.The current on or off setting is displayed.2. Press the Channel Up or Channel Downbutton to turn keystroke tones on or off.3. Choose one of the following:a. Press the Mode/Lock button to enter thenew setting and return to Standby mode.b. Press the Enter/Hi•Low button to enter thenew setting and return to Standby mode.20Mode Functions andGeneral Specifications21Operation Customer Assistance WarrantyIntroduction OperationGeneral Specifications •Roger Beep OnKeystroke Tones OnChannel ButtonsChannel ButtonsMode/Lock ButtonMode/Lock ButtonFRS/GMRS FrequencyAllocation and CompatibilityImportant: Please note that Cobra GMRS models with 15 Channelsmay designate different channel numbers for the same frequency. Forexample, a Cobra 15 Channel GMRS model would need to be tunedto Channel 11 in order to communicate with a 22 Channel GMRS tunedto Channel 15. Please refer to the chart below for channel/ frequencynumber compatibility.A = Channel No. for 22 Channel FRS/GMRS ModelsB = Channel No. for 15 Channel GMRS ModelsC = Type of Radio ServiceD = Frequency in MHzE = Power OutputAB C D E1 1 FRS/GMRS 462.5625 High or Low2 2 FRS/GMRS 462.5875 High or Low3 3 FRS/GMRS 462.6125 High or Low4 4 FRS/GMRS 462.6375 High or Low5 5 FRS/GMRS 462.6625 High or Low6 6 FRS/GMRS 462.6875 High or Low7 7 FRS/GMRS 462.7125 High or Low8 FRS 467.5625 Low9 FRS 467.5875 Low10 FRS 467.6125 Low11 FRS 467.6375 Low12 FRS 467.6625 Low13 FRS 467.6875 Low14 FRS 467.7125 Low15 11 GMRS 462.5500 High or Low16 8 GMRS 462.5750 High or Low17 12 GMRS 462.6000 High or Low18 9 GMRS 462.6250 High or Low19 13 GMRS 462.6500 High or Low20 10 GMRS 462.6750 High or Low21 14 GMRS 462.7000 High or Low22 15 GMRS 462.7250 High or Low
Introduction Operation23IMPORTANT NOTICE: FCC LICENSE REQUIRED •This two-way radio operates on GMRS (General Mobile Radio Service) frequencieswhich require an FCC (Federal Communications Commission) license. A user mustbe licensed prior to operating on Channels 1 through 7 on high power or 15through 22, which comprise the GMRS channels of this radio. Serious penaltiescould result for unlicensed use of GMRS channels, in violation of FCC rules.Operation of this radio is subject to additional rules specified in 47 C.F.R. Part 95.Licensed users will be issued a call sign by the FCC, which should be used forstation identification when operating this radio. GMRS users should also cooperateby engaging in permissible transmissions only, avoiding channel interference withother GMRS users, and being prudent with the length of their transmission time.For licensing information and application forms, please call the FCC Hotlineat 800-418-FORM. Request form #159 and form #605. Questions regardingthe license application should be directed to the FCC at 888-CALL-FCC.Additional information is available on the FCC’s website at www.fcc.gov.Channel 1 through 7 on low power and channels 8 through 14 comprise theFRS (Family Radio Service). No license is required to operate on the FRS.Safety Information for microTALK RadiosYour wireless handheld portable transceiver contains a low power transmitter.When the talk button is pushed, it sends out radio frequency (RF) signals.The device is authorized to operate at a duty factor not to exceed 50%.In August 1996, the Federal Communications Commissions (FCC) adoptedRF exposure guidelines with safety levels for handheld wireless devices.ImportantFCC RF Exposure Requirements: For body-worn operation, this radio hasbeen tested and meets the FCC RF exposure guidelines when used with Cobraaccessories supplied or designated for this product. Use of other accessoriesmay not ensure compliance with FCC RF exposure guidelines. Use only thesupplied antenna. Unauthorized antennas, modifications or attachmentscould damage the transmitter and may violate FCC regulations.Normal PositionHold the transmitter approximately 2 inches from your face andspeak in a normal voice, with the antenna pointed up and away.FCC Licensing andProduct Service Questions22Customer AssistanceProduct Service Questions •If you have any questions about operation or installing yournew Cobra product, or if you need to order replacement parts…Please call Cobra first! DO NOT RETURN THIS PRODUCTTO THE STORE! See customer assistance on page A1.For Products Purchased in the U.S.A.If your product should require factory service, please call Cobra firstbefore sending your radio. This will ensure the fastest turn-aroundtime on your repair. You may be asked to send your radio to theCobra factory. It will be necessary to furnish the following to havethe product serviced and returned.1) For warranty repair include a copy of the original sales receipt.If you send the original receipt, it cannot be returned.2) Send the entire product.3) Enclose a detailed description of the problem along with the nameand address of where the product is to be returned.4) Pack radio securely to prevent damage in transit. If possible,use the original packing material.5) Ship prepaid and insured by way of a traceable carrier suchas United Parcel Service (UPS) or Priority Mail to avoid loss intransit to Cobra Factory Service:Cobra Electronics Corporation6500 West Cortland StreetChicago, Illinois 60707 U.S.A.6) If the radio is under warranty, it will be repaired or exchangeddepending on the model.Please allow approximately three to four weeks beforecontacting Cobra for status. If the radio is out of warranty,a letter will automatically be sent informing you of the repaircharge or replacement charge. If you have any questions,please call 773-889-3087 for assistance.For Products Purchased Outside the U.S.A.Please contact your local dealer for product service information.WarrantyCustomer AssistanceThis device complies with part 15 of the FCC Rules. Operation is subjectto the following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.FCC Warnings: Replacement or substitution of transistors, regular diodes orother parts of a unique nature, with parts other than those recommended byCobra may cause a violation of the technical regulations of part 95 of the FCCrules, or violation of type acceptance requirements of part 2 of the rules.
24Limited One-Year Warranty on Radio(s) & Charger •For Products Purchased in the U.S.A.Cobra Electronics Corporation warrants that its Cobra microTALKradios and charger, and the component parts thereof, will be free of defectsin workmanship and materials for a period of one year from the date offirst consumer purchase. This warranty may be enforced by the firstconsumer purchaser, provided that the product is utilized within the U.S.A.Cobra will, without charge, repair or replace, at its option, defectivemicroTALK radios, chargers, products or component parts upondelivery to the Cobra Factory Service department, accompanied byproof of the date of first consumer purchase, such as a duplicatedcopy of a sales receipt.You must pay any initial shipping charges required to ship the productfor warranty service, but the return charges will be at Cobra’s expense,if the product is repaired or replaced under warranty. This warranty givesyou specific legal rights, and you may also have other rights which mayvary from state to state.Exclusions: This limited warranty does not apply: 1) To any productdamaged by accident; 2) In the event of misuse or abuse of the productor as a result of unauthorized alterations or repairs; 3) If the serial numberhas been altered, defaced, or removed; 4) If the owner of the productresides outside the U.S.A.All implied warranties, including warranties of merchantability andfitness for a particular purpose are limited in duration to the length of thiswarranty. Cobra shall not be liable for any incidental, consequential or otherdamages; including, without limitation, damages resulting from loss of useor cost of installation.Some states do not allow limitations on how long an implied warrantylasts and/or do not allow the exclusion or limitation of incidental orconsequential damages, so the above limitations may not apply to you.For Products Purchased Outside the U.S.A.Please contact your local dealer for warranty information.90-Day Warranty on Cobra Rechargeable BatteriesFor products purchased in the U.S.A. and Canada.Trademark Acknowledgement •Cobra®, microTALK®, Nothing Comes Close to a Cobra®, VibrAlert®and the snake design are registered trademarks of Cobra ElectronicsCorporation, USA. Cobra Electronics Corporation™ is a trademarkof Cobra Electronics Corporation, USA.Warranty Warranty and Trademarks

Navigation menu