Cisco Systems 2500-MDM17-C2 LMX Modem User Manual Ripwave Modem User Guide

Cisco Systems, Inc LMX Modem Ripwave Modem User Guide

User guide

RRiippwwaavvee™™--MMXX MMooddeemm UUsseerr GGuuiiddee For use with all Ripwave-MX Modem models Part Number 40-00097-00 Revision J, Version 1.0, PV1.5 August 1, 2005 Proprietary All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.
Navini Networks, Inc. Ripwave-MX Modem User Guide TABLE OF CONTENTS PERMISSIONS, TRADEMARKS & DISTRIBUTION.............................................................................3 SAFETY .......................................................................................................................................................4 REGULATORY INFORMATION ..............................................................................................................5 BATTERY PRECAUTIONS........................................................................................................................6 INTRODUCTION.......................................................................................................................................7 PACKAGE INVENTORY.........................................................................................................................7 RIPWAVE-MX MODELS.........................................................................................................................7 OPERATING FREQUENCIES .........................................................................................................................8 MINIMUM COMPUTING REQUIREMENTS......................................................................................8 PHYSICAL CHARACTERISTICS..........................................................................................................9 INSTALLING THE LMX MODEM ......................................................................................................10 ACCESSING THE INTERNET..............................................................................................................12 TROUBLESHOOTING...........................................................................................................................12 LCD DISPLAY..........................................................................................................................................12 INSTALLING NAVINI DIAGNOSTICS (NAVDIAG)........................................................................14 TROUBLESHOOTING USING NAVINI DIAGNOSTICS (NAVDIAG)..........................................17 UNINSTALLING NAVINI DIAGNOSTICS (NAVDIAG) ..................................................................23 OPTIONAL BATTERIES .......................................................................................................................24 OPTIONAL EXTERNAL BATTERY PACKS...................................................................................................24 CONNECTING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)........................................................25 THE INDICATOR LIGHT ON THE STANDARD EXTERNAL BATTERY PACK (S-EBP)....................................26 CHARGING THE STANDARD EXTERNAL BATTERY PACK (S-EBP)............................................................26 CONNECTING AND DISCONNECTING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP).............27 THE INDICATOR LIGHT ON THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ............................28 CHARGING THE HEAVY DUTY EXTERNAL BATTERY PACK (HD-EBP) ....................................................29 CARE & MAINTENANCE .....................................................................................................................29 UPGRADING THE MODEM .................................................................................................................30 ADDENDUM 1: RIPWAVE™-MX MODEM - PC TROUBLESHOOTING....................................32 ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................37 2 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Permissions, Trademarks & Distribution NaUnco Copyright© 2001 - 2005, Navini Networks, Inc. All information contained herein and disclosed by this document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are expressly reserved. Acceptance of this material signifies agreement by the recipient that the information contained in this document is confidential and that it will be used solely for the purposes set forth herein. Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic, electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval systems – without the express written permission of Navini Networks, Inc. vini Networks is a registered trademark. The Navini Networks logo, Zero-Install, Ripwave, and wired by Navini are trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be trademarks and/or service marks of their respective owners. Except for the hardware warranty, nothing herein constitutes any representation, warranty, assurance, or guaranty of any kind. Because of continuing developments and improvements in design, manufacturing, and deployment, material in this document is subject to change without notification and does not represent any mmitment or obligation on the part of Navini Networks, Inc. Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this document. All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage is strictly prohibited without the express written permission of Navini Networks, Inc. © 2001 - 2005 Navini Networks, Inc. All rights reserved. 3 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Safety When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce therisk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions that come with the equipment. 1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the equipment to water could cause severe electrical shock or serious damage to the equipment. 2. Do not immerse the equipment in any type of liquid. Use a damp clothe and if needed, water and a mild detergent to clean the plastic shell. Unplug the equipment from the power source before cleaning. 0 source may cause damage to the equipment. e with r manual. . Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on . Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock lace the equipment on an unstable surface. It can fall and cause injury or damage to the equipment. trical shock. Only an authorized repair technician should service this product. 1. Do not expose the equipment to extreme hot or cold temperatures. 2. Do not use the equipment under the following conditions: • When the equipment has been exposed to water or moisture. • When the equipment has been damaged. • When the power cord is damaged or frayed. • ance. 3. Follow all airport and FAA regulations when using the equipment on or near aircraft. 4. Only operate the equipment from the type of power source(s) indicated in this manual (110/22VAC, 60/50 Hz adapter or Navini supplied battery). Any other type of input power5. Power the equipment using only the battery or the AC adapter cable provided, and in accordancthe instructions specified in the use6or tripped over. 7. Do not touch wires where the insulation is frayed or worn unless the equipment has been disconnected from its power source. 8or fire. 9. Do not p10. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and also voids the warranty. Incorrect reassembly can cause equipment damage or elec11When the equipment does not operate properly or shows a distinct change in perform 4 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Regulatory Information is a Radio Frequency transmitter. It is required to comply with FCC RF mount aintained, ditions: ff and on, the user is encouraged ing measures: e equipment and the receiver, a circuit that is different from the one to which the 4) Consult the dealer or an experienced radio/TV technician for additional suggestions. INFORMATION TO USER This device has been authorized as a radio frequency transmitter under the appropriate rules of the Federal Communications Commission. Any changes or modifications not expressly approved by Navini Networks could void the user’s authority to operate the equipment. FCC Notice CAUTION: This deviceexposure requirements for transmitting devices. For all LMX Modems except for the 2.6 LMX with window mount, a minimum separation distance of 8 inches (20 cm) or more must bemaintained between the antenna and all persons during device operations to ensure compliance with the FCC’s rules for Radio Frequency Exposure. For the 2.6 LMX Modem with a window mount, a minimum of 8.3 inches (21 cm) or more must be maintained between the windowantenna and all persons during device operations. If this minimum distance cannot be mexposure to RF levels that exceed the FCC’s limits may result. FCC Compliance and Advisory Statement Tested To Comply With FCC Sta ndards This equipment has been tested and found to comply with the limits for a class B digital device, Pursuant to Part 15 of the FCC rules. The operation is subject to the following two con(1) This device may not causeFOR HOME OR OFFICE USE harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oto try to correct the interference by one or more of the follow1) Reorient or relocate the receiving antenna, 2) Increase the separation between th3) Connect the equipment to an outlet onreceiver is connected, 5 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Battery Precautions CAUTION! To reduce risk of injury or fire, follow these instructions when handling the battery. 1. Ris 2. Do disp 3. Do harimm 4. Do ns except per the instructions in this manual. 5. If u l om the equipment if the equipment is not goi to be used for a ak and cause damage to the equipment. 6. Exesuc bra 7. Store the battery pack in a dry place, 0 to +40 degrees Celsius. 8. Dis k of explosion is possible if the battery is replaced with one not supplied by Navini Networks. not dispose of the battery in a fire. They may explode. Check with the local codes for battery osal guidelines. not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or mful to humans. If battery substances come in contact with the skin, seek medical help ediately. not attempt to recharge the battery by any measing an optional interna battery, remove the battery frng long period of time. The battery could lercise care when handling the battery to prevent shorting the battery with conducting materials h as celets, rings, and keys. pose of used batteries according to environmental guidelines. 6 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Introduction Con(LM nomadic service availability as a computer with this device is as long as there is coverage in the area. Package ventory Please verify the contents of your LMX Modem package. If you do not find all of these items in your package, notify the supplier froIn M gratulations! The Liquid Cystal Display Ripwave™-MX X) dual-mode Modem is a user-friendly, easy-to-install device that helps you connect wirelessly to the Internet. It provides complete broadband Internet access to residential and small professional hardware installation. The LMX Modem also provides moved from room to room, location to location, or even city to city m whom you obtained it. • LMX Modem • PC-to-LMX Modem cable (Ethernet straight cable) • Navini Diagnostics Installation CD X Modem will operate in either the 2.4 GHz, 2.5-2.7 ed on the next page. • LMX Modem AC power adapter • Ripwave-MX Modem User Guide (on CD) • Ripwave-MX Modem Quick Installation Guide X Models Your LML GHz, 3.4 GHz, or 3.5 GHz range. Within each frequency range there are several model types, describ office/home office (SOHO) customers without the necessity of 2.4, 2.5-2.7, 3.4 & 3.5 GHz LMX Modem7 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Operating Frequencies equirements ee, also, Addendum 1) Minimum omputing CR(S Modem Model Frequency Range Operating Band 2.4 GHz LMX 2400-2483 LMX E 2.400 GHz – 2.483 GHz ISM 2.5 – 2.7 GHz LMX 2.5-2.6 LMX E 2.500 GHz – 2.686 GHz MMDS/ITFS 3.4 GHz LMX 3410-3525 LMX E 3.410 GHz – 3.525 GHz BWA/FWA 3.5 GHz LMX 3475-3600 LMX E 3.475 GHz – 3.600 GHz BWA/FWA The “E” in the model name stands for Ethernet. Your computer indows® 95 or later). should have this port for connecting the Modem. • An Ethernet connection will function with any Win32® em (WOperating Syst Operating System1: Ethernet Modems: Any Win32 Operating System (OS) - Windows 952, Windows NT, Windows 983, E3,  Ensure that the pc network port is enabled. Windows 98SE3, Windows 2000, Windows MWindows XP4, or later version. General Information: CPU: Pentium level or higher RAM: 32 MB or the Operating System minimum, whichever is greater Hard Drive: 50 MB free disk space for either monitoring software (Navini Diagnostics Tool) 5Monitor: 256 colors, 800 x 600 resolution 1NOTE: To upgrade your Operating System after loading the Navini Diagnostics software, you must first uninstall Navini Diagnostics prior to upgrading the OS. Otherwise, Navini Diagnostics will not work. See Uninstall structions in this Guide. Internet Explorer 3.0 or higher is required for installation on Windows 5 Operating Systems. The LMX Modem must be left powered ON whenever you shut down r restart any Windows 98 or ME platforms. If the Modem is off, a blue screen pears on the monitor. In the event that happens you will most likely have to ower cycle the PC. Windows XP must be Service Pack Level 1 or higher. Navini Diagnostics software is supported on Win98, Win98SE, in2000, WinME, WinXP or higher, Mac X (also called Mac10) or higher, or in2NOTE:93NOTE:oapp4NOTE:5NOTE:W 8 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide hysical haracteristics ed Hat Linux 8.0 or higher. Mac users must have the Snuffit extraction sof T ual yo roc f installing t X Mo softw dev d to o e v alu T z sed in most of the illustrations in this m her no 2.5 3.5 G els you experience any difficulties with your unit, please contact ur e Ripodems (2.4, 2.5-2.7, 3.4, & 3.5 GHz) PC Rtware. his manhe LMwill guide dem andu through the simple pare, which has been ess oelopeptimize thHease and con enience for you, our v ed customer.he 2.6 Ganual w model is ue there are differences in the 2.4, -2.7, 3.4 &Hz mod . Ifyour Service Provider or the vendor from whom you obtained yoLMX Modem. Th following figure shows the physical characteristics of thewave-MX LMX Modems. LMX M Front AntennaLiquid Crystal DisplayOn/Off ButtonBackPower Adapter ConnectionEthernet Cable ConnectionFront AntennaLiquid Crystal DisplayOn/Off ButtonFront AntennaLiquid Crystal DisplayOn/Off ButtonBackPower Adapter ConnectionEthernet Cable ConnectionBackPower Adapter ConnectionEthernet Cable Connection9 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing the MX Modem ee, also, Addendum 1) wing instructions are for the installation of the LMX L(S The folloModem. Please read all instructions before attempting the installation. It is advisable to turn off the computer and the LMX Modem before performing the installation. Step Action Illustration 1. Connect the Ethernet cable to the Ethernet port on the computer. 2. Connect the other end of the Ethernet cable to the LMX Modem. 3. Connect the AC power adapter to the LMX Modem. Plug the other end into a 110/220 VAC 60/50 Hz outlet. CAUTION! Only use the AC power adapter specifically supplied with the LMX Modem. Using any other adapter may cause damage to the Modem. Connection forEthernet cableConnection forEthernet cableConnection for Power Adapter Connection for Power Adapter 10 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing the LMX Modem, continued Step Action Illustration 4. Rotate the antenna on the LMX Modem clockwise 180 degrees to the UP position. This reveals the LMX or movement of the antenna in any other direction may cause damage to the LMX Modem. Modem liquid crystal display (LCD). CAUTION! Rotation 5. Turn the Modem ON by pushing the On/Off button in. 6. If the LCD turns on, proceed to Step 7. If notthere is a problem with the Modem or the AC power adapter. Ch, eck all cables for proper connection. If there is still a problem, contact the supplier who gave you the package. AntennaLiquid Crystal DisplayAntennaLiquid Crystal DisplayLiquid Crystal DisplayOn/Off ButtonOn/Off ButtonOn/Off ButtonLiquid Crystal Display (LCD)Liquid Crystal Display (LCD)11 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing the LMX Modem, continued Accessing the nternet roubleshooting CD Display I T L Step Action Illustration 7. Turn your computer onand log in. 8. Proceed to the “Troubleshooting” section of this manual. With your Modemcomaccess the Internet, open the web browser that is installed on your compu After installation, if you are experiencing difficulties with your rne w thRequir m 1 to ensure your computer meets those r s. Next, go back over the installation procedures and ensure those steps were completed properly. Assuming the computer requirements are met and the installation steps were completed as required, you will need to observe the signal sync and signal strength indicators on the LMX Modem. You also may need to install the monitoring software. This software, called the Navini Diagnostics, is provided on a CD that came in your Modem package. The Navini Diagnostics software assists in solving connection problems as well as providing other uab The LCD Display is a text-based display that provides valuable inform em’conjun software, you can troubleshoot signal issues, network connections, and power problems. now installed, and both the Modem and puter power on, you should be able to surf the Internet! To ter. Inte t connection, please revieements and Addenduequiremente Minimum Computing val le information. ation about the LMX Modction with the monitoring s operation. Used in CONNECTEDQSCONNECTEDQSS12 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide LCD Display, continued fo finitions for the LCD in ications. The llowing table provides de d LCD Indicator: SEARCHING Blinking flash: Syncing CONNECTED: Locked-on S: Signal Strength Meter (SSI) 0 bars S<100 1 bar -99<S≤-100 2 bars -96<S≤-99 3 bars -92<S≤-95 4 bars -88<S≤-91 5 bars -84<S≤-87 6 bars -80<S≤-83 7 bars -76<S≤-79 8 bars -70<S≤-75 Q: Signal Quality Meter (SNR) 0 bars Q<10 1 bar 10<Q≤-12 2 bars 13<Q≤-14 3 bars 15<Q≤-16 4 bars 17<Q≤-18 5 bars 19<Q≤-20 6 bars 21<Q≤-22 7 bars 23<Q≤-24 8 bars Q≥24 Activity Indicator: Flashing arrows: Traffic (both arrows flash) Blank: No Traffic Activity 13 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Naviniagnostics i NavDiag) ote: The screenshots shown in these instructions were taken from E operating system, the screens you see may vary from the the instructions. D( Na laptop with Windows 2000. If you have a Windows 98, XP, or Mscreens shown in Step Action Illustration 1. Shut down all proincluding anti-virugrams, before installing the Navini Disoftware. s software programs, agnostics 2. Insert theDiagnositcs Installation CD into the CD-ROM drive. Navini 3. Open the CD by clicking the folderNavini_Diagnostics. on the My Computericon. Double-click on named 4. Double-click on the icon for the filenavdiag_ xe*. This will lly start the installation of Navini Diagnostics. s running Mac ac.sit or ile. Mac users will need the Snuffit extraction software. Example: windows.eautomatica*If your PC ior Linux software, you will need the navdiag_mnavdiag_linux.bin f5. The InstallAnywhere window appears. The progress bar indicates that InstallAnywhere has initialized. Windows 2000 Screen 14 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) ag), Installing Navini Diagnostics (NavDicontinued Step Action Illustration 6. The Navini Diagnostics Language screen appears*. Select a and click OK Windows 2000 Screen languageto continue. 7. The progress bar indicates the files being installed. Windows 2000 Screen 8. The Navini Diagnostics Introduction screen appears. Click Next to continue. Windows 2000 Screen 9. t ead the e License Agreement is not accepted, you cannot install the software. Windows 2000 Screen The License Agreemencreen appears. RsLicensing Agreement.Select the I Accept option, and click Next to continue. NOTE: If th 15
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Navini iag), Diagnostics (NavDcontinued Step Action Illustration 10. The Choose Install the ish to continue. NOTE: The default installation folder provided by the software is shown in the illustration. Folder screen appears. Enter the name offolder where you winstall the software. Click Next toWindows 2000 Screen11. cut am Group, and click Next to continue. Windows 2000 Screen The Choose ShortFolder screen appears. Select the default, In a new Progr 12. eview the ontents for accuracy. lick Install to ontinue. or your installation and omputer, this screen ay have different The Pre-Installation Summary screen appears. RcCc Fcminformation than what is shown in the illustration. Windows 2000 Screen 13. The Installing screen will display as the application files are loaded. 16 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Installing Navini iagnostics (NavDiag), ontinued roubleshooting sing Navini iagnostics NavDiag) Dc TUD( Step Action Illustration 14. At the Install Complete screen, click Done to window. Windows 2000 Screen close the pe s son the Navini Diagnostics icon on your desktop. To o n the Navini Diagnostic oftware application, double-click Navini Diagnostics.lnk The Connection Status screen will open and display data if the Modem is in session. The screen will refresh live data every second. 17 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using continued sent the PC, the co een the PC and the em ction betweeBase Station, and the Base Station to which the Modemcommu rks over the connections indicate working connections. If the connection between the PC and the Modem or between the odem and the Base Station is interrupted, an “X” is positioned ver the corresponding icon. The Signal Strength and Signal Quality are dynamic bar areas that dicate how well your Modem is receiving signals from the Base ceived by the Modem. The strength of the signal is represented by a group of colored bars. The higher the pile of bars Navini Diagnostics (NavDiag), The icons repre nnection betwMod , the Modem, the connenicating. Check man the Modem and the is Mo inStation. In particular, the Signal Strength bar area graphically represents the strength of the Absolute BTS Synchronization Signal regoes, the stronger the signal is. The color of the bars also gives an indication of the strength of the signal. Green lines indicate an excellent signal. Orange lines indicate a good signal while red lines indicate a weak signal. 18 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The Signal Quality bar area graphically represents the Signal-to-Noise Ratio (SNR) of the downlink access code channel (ACC) received by the Modem. Again, the quality of the signal is represented by a group of colored bars. The higher the pile ofgoes, the better the SN bars R of the signal. The color of the bars also ives an indication of the quality of the signal. Green lines indicate n a good signal while red nes indicate a weak signal. o increase the strength and quality of the signal, change the cation of the LMX Modem. Try moving it closer to a window, to le is repositioned, observe the Signal trength and Signal Quality bars. Position the Modem for he History graphs plot the change in signal strength and signal uality over time. The graphs cover the last minute and are updated very second. Read the graphs from right to left. The right side of t of the Connection Status screen, are four parameters. hese parameters are BTS ID, Network ID, Active SW Version, nd Standby SW Version. The BTS ID and Network ID indicate e BTS to which the Modem is currently synchronized and the etwork in which the Modem is operating. Active SW Version and tandby SW Version indicate the version number of the software urrently loaded in the “active side” and “standby side” of the odem’s flash memory. ga excellent signal. Orange lines indicateli Tloa higher location, away from other wireless devices (microwave ovens, cordless phones), and away from metal objects (shelves, ficabinets). As the LMX ModemSmaximum signal strength and quality. Tqethe graph represents the most recent status of your Modem. A the bottomTathnScM19 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The two letters in parenthesis following the release number indicate the type of software load. JD indicates Joint Detection, while EN indicates Enhanced Nulling. On the left-hand side of the screen, there are five screen optionConnection Status, Configuration, Trend Analysis, Statistics, and About. The following screen will appear when you press the Configuration button. s: h date your Modem’s ftware if you are so directed by your Service Provider. If you ust update your Modem’s software, your Service Provider will rovide you with instructions regarding what to do. he Allow Customer Satisfaction Reporting box gives you control ver whether your Service Provider is allowed to monitor your odem using the remote CPE Logging function and to use your ess T e Configuration screen enables you to upsomp ToMcomputer to store the CPE log files created by this function. By default, this box is checked which means the Service Provider canmonitor your Modem. The Trend Analysis screen enables you to view how some Modem parameters evolve over time. With this screen, you can select up tothree parameters to plot. To view the Trend Analysis screen, prthe Trend Analysis button.20 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued y ing screen will ppear. This screen displays the value of the selected parameters ver the last five minutes, updated once every second. The graphic rolls from right to left. B pressing the Plot Graph button, the followaosc To view the Statistics screen, press the Statistics button. The statistics screen enables you to view the current value of selectedparameters. These values are updated as they change over time. 21 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Troubleshooting Using Navini Diganostics (NavDiag), continued The About screen provides vital information such as the version of r tton. An example of the About screen llows. Help button appears on the top right corner of all the NavDiag indows. The Help button gives you two options. The first option, n NavDiag, provides help text on the functionality of the avDiag program. The second option, About NavDiag, is quivalent to clicking on the About icon. the Navini Diagnostics software currently installed in your computer. It also provides a website address and telephone numbewhere you can contact your Service Provider. To view the About screen, press the About bufo AwONe 22 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) iagnostics NavDiag) ftware, e.g., to upgrade your Operating System software, follow e procedure below. ote: The screen shots shown in these instructions were taken om a laptop with Windows 2000. If you have a Windows 98, XP, r ME operating system, the screens you see may vary from the reens shown in the instructions. Uninstalling Navini D( If for some reason you need to uninstall the Navini Diagnostics soth Nfrosc Step Action Illustration 1. On your computer screen lower left corner, click on Start > Programs > NavDiag > Uninstall. Windows 2000 Screen 2. The Install-Anywhere Un installer screen Windows 2000 Screen appears. Click Uninstall. 3. The screen will indicate the application files are uninstalled. Windows 2000 Screen 23
Navini Networks, Inc. Ripwave-MX Modem User Guide Uninstalling Navini Diagnostics (NavDiacontinued g), ptional atteries ptional External attery Packs OB OB Step Action Illustration 4. The Uninstall Complete screen appears w hen finished. Click on Quit Windows 2000 Screen to close the Uninstall screen. 5. e uninstall process. This will ensure the uninstall process completes successfully. Restart the PC to complete th LM ptional externassocia se battery packs aExternal Battery Pack (S-EBP) and the Heavy Duty-External Battery Pack (HD-EBP). The Standard External Battery Pack (S-EBP) provides approximately 16 Watt-Hours of power while the Heavy Duty-External Battery Pack (HD-EBP) provides approximately 44 Watt-Hours of power. This section describes how to install and charge the optional external battery packs. The ex stalled insidthey are connected to the Modem. Before we discuss how to connect and charge the external battery packs, let’s discuss the similarities and differences between the Standard External Battery Pack (S-EBP) and the Heavy Duty External Battery Pack (HD-EBP).  Both the S-EBP and HD-EBP can be used with any of the LMX Modems.  The HD-EBP provides 44 Watt-Hours of power while the S-EBP provides 16 Watt-Hours of power. The X Modems have two oted with them. Theal battery cks re the Standard pa. ternal batteries are not in e the Modem. Instead 24 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Optional External Battery onnecting the tandard External attery Pack (S- The amount of time the S-EBP and HD-EBP can operate before c varies. This time is dependent of the usage run on the w g table shows example app ong the batteries can run before a rec e Packs, continued CSBEBP) re harging LMX Modem. The folloroximations for how lharge is required. UsaginApproximate hours of Usage Before Recharge Required S-EBP HD-EBP Standard 2 Up to 6 Moderate 1.5 4.0 Approximately Heavy 1 Up to 3.5 con any of the LMX Modems, plug the battery’s pig-tail cord into the input socket located on the back of the Mo To nect the S-EBP to dem. 25 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Navini Networks, Inc. Ripwave-MX Modem User Guide 26 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) The Indicator Light on the Standard External Battery Pack (S-EBP) Charging the Standard External Battery Pack (S-EBP) The S-EBP has one indicator light that resides on top of the unit. This light has four states associated with it. The states are described below.  Light is off when any of the following apply: • The battery is not connected to a Modem or to the battery charger • The battery is connected to a Modem but the Modem is off • The battery is connected to a Modem and the Modem is on but the battery power is depleted  Light is green when the battery is on and fully charged.  Light is amber when the battery has power but is no longer fully charged. If the battery is connected to the battery charger, an amber light means the battery is being charged.  Light is red when the battery is low on power. When the battery is low, it has approximately 15% of its charge left. The S-EBP will need to be recharged when the battery is connected to a Modem and the Modem is turned on but the LED on top of the battery remains off (indicating the battery has no power) or is red (indicating the battery level is low). To recharge the S-EBP, use only the 12V charger that came with the S-EBP. Using any other charger may damage the battery. To charge the S-EBP, plug the 12V adapter into the 12V input socket on the S-EBP. NOTE: The battery may charge while it is connected to a Modem. NOTE: Do not attempt to plug the 12V adapter into the Modem as this may harm the Modem. 26 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Connecting and isconnecting the eavy Duty xternal Battery ack (HD-EBP) If yof t ck, foll DHEP ou have a HD-EBP, the battery pack is installed in the bottom he LMX Modem. To install and or remove the battery paow the steps based on your model of Modem. Step Action Illustration 1. De e front buon the HD-EBP so that the front prong moves intowards the center of theH press th tton D-EBP. 2. Place the back slot of the LMX Modem over the back prong of the HD-EBP. 3. Place the front part of the opening on the LMX Modem over the front prong on the battery. 4. Release the button on the battery. 5. Press firmly down on the Modem so that the Modem firmly connects with the HD-EBP. FrontbuttonFront prong Back prongFront slot Back slotFrontbuttonFront prong Back prongFrontbuttonFront prong Back prongFront slot Back slotFront slot Back sl ot27 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Connecting and Disconnecting the HD-EBP, continued 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) ht Heavy Duty xternal Battery ack (HD-EBP) The Indicator Ligon the EP Step Action Illustration 6. Plug the HD-EBP’s pig-tail cord into the power slot on the Modem. 7. To remove the battery pack from the Modem, unplug the pig-tail cord. Depress the front button on the HD-EBP. Lift the Modem off of the battery pack. he HD-EBP has one indicator light T that resides on the back end of ry is not connected to a Modem or to the battery but the Modem is off and the Modem is on Light is green when the battery is on and fully charged. Light is amber when the battery has power but is no longer fully charged. If the battery is connected to the battery charger, an amber light means the battery is being charged. Light is red when the battery is low on power. When the battery is low, it has approximately 15% of its charge left. the unit near the pig-tail cord. This light has four states associatedwith it. The states are described below.  Light is off when any of the following apply: • The battecharger • The battery is connected to a Modem• The battery is connected to a Modembut the battery is empty of power  28
Navini Networks, Inc. Ripwave-MX Modem User Guide Charging the P) are & aintenance he HD-EBP will need to be recharged when the battery is n ). HD-EBP, use onl rger that came with HD arger may damage the battery. To cha  Plug the 12V adapter into the 12V input socket on the HD-EBP.  Plug the other end of the adapter into an electrical wall socket. NOTE: Do not attempt to plug the 12V adapter into the Modem as this may harm the Modem. NOTE: The battery may charge while it is connected to a Modem. The LM to give years of trouble-free service. ens following care and maintenance truc Ke st and moisture. If the Modem gets we ediately. Handle the Modem gently. Dropping it or mishandling it can cause damage to the plastic shell or the electronic circuitry. Keep the Modem away from high temperatures. Heat can cause damage to the plastic shell or the electronic circuitry. Heavy Duty External Battery Pack (HD-EB CM Tconnected to a Modem and the Modem is turned on but the LED othe back of the battery remains off (indicating the battery has no power) or is red (indicating the battery level is low To recharge the y the 12V chathe -EBP. Using any other chrge the HD-EBP: X Modem is designedure operation, read theTo ins tions. ep the Modem free of dut, use a towel to dry it immPig   -tail Cord12V Input Socket Plugs into Wall Socket 29 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) are & Maintenance, pgrading the Use only a mild detergent and a soft, damp cloth to clean the o not use any chem ves to clean the pla  If t h the Modem, do not attempt to repair it yourself. Report the problem to your Service Provider.  If you are going to upgrade your Operating System after loading the Navini monitoring software (Navini Diagnostics), you must first uninstall the monitoring software prior to upgrading the OS. Otherwise, the monitoring software will not work. See Uninstall instructions in this Guide.  The LMX Modem must be left powered ON whenever you shut down or restart any Windows 98 or ME platforms. If the Mo n ap ears on the monitor. In the event this happens you will mostly likely have to power cycle the akes e Modem work. our Modem. r upgrade the Modem. This method is used for systems that have  You u to use your Navini This 0 powered on during the OTA upgrade process. The OTA upgrade is ormally transparent to the user; in other words, there should be no oticeable service interruption. The web or CD upgrade comes ith instructions and takes a minimal amount of time to complete. ote: If you use the Navini Diagnostics Tool to upgrade your odem software load, the computer connected to your Modem Ccontinued UModem M dem. Do icals or abrasistic shell. here is a problem witdem is off, a blue scree PC. pThere are three different ways to upgrade the software that mth  Your Service Provider may perform an over-the-air (OTA) upgrade, where the up-to-date software files are transferred wirelessly from the Base Station to y  Your Service Provider may provide a downloadable web file oCD-ROM with software to be installed on your PC and used toa software release prior to 4.0. r Service Provider may instruct yoDiagnostics Tool to upgrade your Modem software load.method is used for systems that have a software release of 4.or greater. The latter two methods are used only if the Modem was not nnw NM30
Navini Networks, Inc. Ripwave-MX Modem User Guide must already have an IP address. If your computer does not hIP address, contact your Service Provider. If you attempt to upgrade your Modem software through the Navini Diagnostics Tool and the computer does not have an assigned IP aave an ddress, you ay see one of the following error messages: m 31 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide 3232ADDENDUM 1: R Troubleshooting - For Use With AllC Operating Systems rior to installing the Navini System eets the criteria given in the tab ay ccur as a result of installation. It stalled prior to installing the Naipwave™-MX Modem - PC Ripwave-MX LMX Modems and Navini Diagnostics Software - PP Diagnostics software, please check to insure that the PC Operating le below. If these criteria are not met, unpredictable problems m is recommended that the user have the latest Windowsmoc updatesvini Diagnostics software. in Operating System Ethernet interface Notes Win95 Supported 1, 2 Win98 Supported 2 Win98, 2nd ed. Supported 2 WinME Supported 2 Win 2000 Supported 2 Win NT 3.0/4.0 Supported 1, 2 Win XP Supported 3 Note 1: Internet Explorer 3.0 orote 2: Requires Service Pack 1 ileges. thernet Interface he Ethernet Modem may be con onnect multiple PC devices to a PC sers and is analogous to a multi- thernet LAN. Check with your Service rovider if multiple IP addressing is required for your particular configuration. The distinct advantage of e Ethernet Modem is that it s it ideal r small businesses that have a m ddresses can be assigned to the d ents, or oint-to-Point Protocol Over Eth E). ultiple Interface Environmhen a PC has an internal in LMX odem, you should do the fo If the wireless connectio If the built-in wireless connection is required for local networking and wireline Ethernet is used via the LMX Modem for Int hat the wireline interface’s defa higher is required tics software, the user MUST have Administrative privNNote 3: To load the Navini Diagnos ET nected to a PC via an Ethernet connection. Also, it is possible tosingle Modem. The multi-PC configuration is transparent to the PC configuration on a normal EcuPth connects to any device that has an Ethernet interface. This makeix of devices, such as Unix machines, Apple Computers, etc. IPevices dynamically via a DHCP server, or as Fixed IP assignmernet (PPPofoaP M ents terface (for example, a Wireless Ethernet interface) in addition to thellowing: n is not required, disable the internal wireless connection WM ••ernet connection, change the interface metric configuration so tult gateway is used. (See your Operating System’s User Guide.) 32 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide 3333outers either the Navini LMX Mon through a uter. onfiguration Options Results of Correct Navini Diagnostics Installation Experienced PC users can check the results of the Navini Diagnostics installation by looking at the log file that is created during the installation process. The log file is named “Navini_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini Diagnostics. ------- Install Begin: Tue Jul 20 12:15:22 CDT 2004 Install End: Tue Jul 20 12:15:30 CDT 2004 Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394 Summary ------- Installation: Successful with warnings. 2 SUCCESSES 1 WARNINGS 0 NONFATAL ERRORS 0 FATAL ERRORS RN itor nor the Navini Diagnostics software will work if it goes ro C Modem connectedto a single computer(Ethernet) Modem providingaccess to the Ivia an Ethernenternet t hub Host computer usedas a router to network(USB or Ethernet) Modem providingaccess to the Internet via an Ethernet hub Modem providingaccess to the Internet via an Ethernet hub Host computer usedas a router to network(USB or Ethernet) Host computer usedas a router to network(USB or Ethernet) Modem connectedto a single computer(Ethernet) Modem connectedto a single computer(Ethernet) 33 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1)
Navini Networks, Inc. Ripwave-MX Modem User Guide Action Notes: o stall Loheck Disktes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840 \Navini Networks\NavDiag, ValueName: stallDirectory Status: W s: WARNIN M stry Entry: Key: HKEY_LOCAL_M FTWARE\Navin orks, Value Name: , Value Data: Status: SUCCESSFUL M : Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name: , Value D Status: SUCCESSFUL M ry Entry: Key: HKEY_LOCAL_M FTWARE\Navin etworks\NavDiag, Value Name: ry, Value Data: C:\Program Files\Navs\NavDiag\Uninstall\ vini Diagnostics (Install All Uninstaller Components) ninstall NavDiag.lax Status: SUCCESSFUL stall File: C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll tal N ne. g Detail: In C Space: C:\Program Files\NavDiag Status: SUCC Additional NoESSFUL Install Directory: C:\Program Files\NavDiag\ Status: SUCCESSFUL Get Registry Entry: Key: HKEY_LOCAL_MACHINE\SOFTWAREInARNING Additional Note G - Win32Exception ake Regi ACHINE\SO i Netwake Registry Entry ACHINE\SO i Nata: ake RegiststallDirectoACHINE\SODiag i NIn Status: SUCCESSFUL Install Directory: C:\Program File Status: SUCCESSFUL Install Uninstaller: Na Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\jre Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Uninstall\U Install Directory: C:\Program Files\NavDiag\Uninstall\resource\ Status: SUCCESSFUL In Status: SUCCESSFUL Ins l File: C:\Program Files\NavDiag\Uninstall\resource\remove.exe Status: SUCCESSFUL 34 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3434
Navini Networks, Inc. Ripwave-MX Modem User Guide Make Registry Entry: Key: me: Status: SUCCESSFUL KEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name: UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe" Status: SUCCESSFUL Install Uninstaller: Navini Diagnostics (Install All Uninstaller Components) Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.exe Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\Navini Diagnostics.lax Status: SUCCESSFUL Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components) Status: SUCCESSFUL Install Directory: C:\Program Files\NavDiag\data\ Status: SUCCESSFUL C:\Program Files\NavDiag\data\images\splash.gif Status: SUCCESSFUL le: C:\Program Files\NavDiag\data\images\buttonbar.gif data\images\about2.gif stall File: C:\Program Files\NavDiag\data\images\about1.gif Status: SUCCESSFUL le: C:\Program Files\NavDiag\data\images\about.gif C:\Program Files\NavDiag\data\images\uninstall.gif tatus: SUCCESSFUL rogram Files\NavDiag\data\log\ s: SUCCESSFUL HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value NaDisplayName, Value Data: Navini Diagnostics Make Registry Entry: Key: H Install Directory: C:\Program Files\NavDiag\data\images\ Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\images\billboard.gif Status: SUCCESSFUL Install File: stall FiIn Status: SUCCESSFUL nstall File: C:\Program Files\NavDiag\I Status: SUCCESSFUL In nstall FiI Status: SUCCESSFUL Install File: S C:\PInstall Directory: Statu 35 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3535
Navini Networks, Inc. Ripwave-MX Modem User Guide Install Directory: C:\Program Files\NavDiag\data\lib\ Status: SUCCESSFUL C:\Program Files\NavDiag\data\lib\ctl.jar Status: SUCCESSFUL Diag\data\lib\navDiag.jar \lib\jfreechart-0.9.13.jar tatus: SUCCESSFUL Status: SUCCESSFUL avDiag\data\doc\ Status: SUCCESSFUL irectory: C:\Program Files\NavDiag\config\ stall Directory: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\ reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk reate Shortcut: C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk stall Directory: C:\Documents and Settings\luis\Desktop\ - Directory already existed reate Shortcut: C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk Install File: Install File: C:\Program Files\Nav Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar S Install File: C:\Program Files\NavDiag\data\lib\log4j.jar Install Directory: C:\Program Files\N Install D Status: SUCCESSFUL Install File: C:\Program Files\NavDiag\config\NavDiag.lcf Status: SUCCESSFUL In Status: SUCCESSFUL C Status: SUCCESSFUL C Status: SUCCESSFUL In Status: SUCCESSFUL Additional Notes: NOTE C Status: SUCCESSFUL 36 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3636
Navini Networks, Inc. Ripwave-MX Modem User Guide EnADDENDUM 2: d User Software License Agreement between Buyer ARTICLE 1 .1 Act of Assent.Navini Networks, Inc. and IMPORTANT MESSAGE 1 Installing the Software indicates that you have read, understand and accept this ARTICLE 2 License Agreement. LICENSES 2.1 Grant of License. The Software and related Documentation, are the intellectual property of Navini tected by law. Navini Networks, Inc. grants to Buyer a persoNetworks, Inc. and are prononexclusive, nontransferable worldwide license, for revocable use (as permnal, itted herein) of the ions of this License Agreement and the Master Supply ttached. Buyer is permitted to install and use the Software on its server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or rties. Software based on the terms and conditAgreement to which it is aotherwise transfer the Software to any third pa.2 Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the eleases and versions licensed by Navini rsuant to this License Agreement, whether in printed or machine-readable format. Buyer acquires only the right to use the Software and related Documentation nt. Buyer promises to keep the Software in of Navini Networks, Inc. and agrees to destroy or return the Software sing the Software or upon termination or e Agreement for any reason. .3 Backup Copies2Software and related Documentation and subsequent rNetworks, Inc. to Buyer pusubject to the terms and conditions of this Agreemeconfidence for the benefit and all copies at such time as Buyer chooses to cease ucancellation of this Licens2. Buyer may copy the Software for safekeeping (archival) or backup purposes, ject to the provisions of this License ded that each copy shall include in readable format any and all arkings contained in the original. provided that all such copies of the Software are subAgreement, and also proviconfidential, proprietary, and copyright notices or m2.4 Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its d to make use of the Software in the form in er solely for Buyer’s own computer server location. Buyer represents s not expressly delineated in this ply with all export, re-export, and other laws in its use of the Software. server to End-Users. Each Buyer shall be authorizewhich it is provided to Buythat it will not use the Software for any purpose that ir represents that it will comAgreement. Further Buye37 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3737
Navini Networks, Inc. Ripwave-MX Modem User Guide 2.5 Suitability. rmining which software best suits Buyer’s needs, for ting the Software, and for the results obtained. Accordingly, each d evaluate the Software’s capabilities before making ut licensing the software. b. Navini Networks, Inc. makes no representation that the Software conforms to or satisfies ncouraged to engage professional assistance engineers to evaluate the suitability of the Software for Buyer’s use. oftware is suitable for Buyer’s intended a. Buyer alone is responsible for deteinstalling and operaBuyer should determine its needs, ana final decision aboany federal, state, or local laws. Buyer is efrom attorneys andc. Navini Networks, Inc. makes no claims that the Spurposes. 2.6 Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally purposes of upgrading and maintaining the Software. access the Software for the2.7 U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government ued on or after December 1, 1995 is provided with the commercial license rights and restrictions described elsewhere herein. All Software provided to the U.S. d prior to December 1, 1995 is provided with ided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR TRADE SECRETS pursuant to solicitations issGovernment pursuant to solicitations issue“Restricted Rights” as prov252.227-7013 (Oct 1988), as applicable ARTICLE 3 3.1 Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to ny design, w-how gained by access to the Software to Licensor’s competitors. oftware to develop a acknowledge, understand and agree, constitute a material breach of this License Agreement. Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose acode, or technological knoBuyer shall not use design, code, or documentation gained by access to the Speting software product. To attempt to or to do so, the Parties similar technology or a com3.2 Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed Copyright, Patent and other laws protect Third therwise bundled with the promises to keep such Third Party Intellectual Property in confidence to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party owned Intellectual Property under the same terms and conditions as the licensed Software as set forth in this License Agreement. Software covered by this License Agreement may contain Intellectual Property owned by Third Parties and duly licensed to Navini Networks, Inc. Party Intellectual Property manufactured with, marketed with, or olicensed Software. Buyer 38 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3838
Navini Networks, Inc. Ripwave-MX Modem User Guide ARTICLE 4 4.1 Intellectual Property Indemnifica INDEMNIFICATIONS AND WARRANTY tion; Entire Liability. ARTICLE 15 OF THE SUPPLY AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE LIABILITY OF NAVINI NETWORKS, I TH RESPECT TO INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE, DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC. SHALL HAVE NO ADDITION SPECT TO ANY ALLEGED OR PROVEN INFRINGEMENT. NC. WIAL LIABILITY WITH RE4.2 Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING (WITHOUT LIMITATION) THE IMP ANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A LIED WARRMATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR EACH SPECIFIC ITEM OF SOFTWARE LICENSED. ARTICLE 5 LIMITATION OF LIABILITY 5.1 Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLELAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVININETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES. 5.2 License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer unthis Agreement for the particular licensed Software that caused the damages. der 5.3 Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the Software error as provided in this License Agreement or the Supply Agreement to which it is attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer from significant loss of valid data. 39 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 3939
Navini Networks, Inc. Ripwave-MX Modem User Guide ARTICLE 6 OBJECT CODE ONLY-NO MODIFICATIONS cations6.1 Modifi . In order to maintain the “trade secret” status of the information contained in the shall noportionand other license information. This information is placed in the object-code portions to prevent unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any unless 6.2 Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyert modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any of the object code of the Software module. Buyer shall not use the Software without a license to the Software object code. The object code contains the license number, date of license, of this information. Further Buyer shall not make, full or partial, copies of any documentation whether printed or machine- readable media supplied with the Licensed Software expressly granted prior written permission by Navini Networks, Inc. Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with respect to the Software (including Section 16). Buyer is fully liable and responsible for any damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer apposubcontractor who accesses the Software without Navini’s prior written consent. Buyer shall defend, indemnify, and hold Navini Netwints a orks, Inc., its directors, officers, employees, agents, Authorized Partners, and other representatives harmless accordingly for all costs and direct and indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is pre-approved by Navini in writing for access to the Software, then this Section shall not apply. 6.3 Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or identification that indicates Navini Networks, Inc. ownership from any part of the licensed ware Copyri All righ Navinitrademtradem spective owners. Rev. 052302 Software, it being expressly understood and agreed that the existence of such copyright noticeshould not be construed as an admission or presumption that publication of the licensed Softhas occurred. END OF AGREEMENT ght © 2001-2005 Navini Networks, Inc. ts reserved. Printed in the USA. Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are arks of Navini Networks, Inc. Other product and company names mentioned herein may be arks and/or service marks of their re40 050801_pv1.5_Ripwave-MX Modem User Guide_40-00097-00j(4.3.1) 4040

Navigation menu