Circuit Design NK24Y 2.4G Transceiver module User Manual OG NK 24Y v08e

Circuit Design, Inc. 2.4G Transceiver module OG NK 24Y v08e

User Manual

OPERATION GUIDEOG_NK24Y_v08e Circuit Design, Inc.11Regulatory compliance informationRegulatory Statement for FCCInstructions to the final system integratorsThe final system integrator must ensure there is no instruction provided in the user manual or customerdocumentation indicating how to install or remove the transmitter module.This module should be installed in the host device according to the interface specification.LabelingFCC ID: V9X-NK24YThe proposed FCC ID label format is to be placed on the module. If FCC ID is not visible when themodule is installed into the system, “Contains FCC ID: V9X-NK24Y shall be placed on the outside of finalhost system.The following information must be indicated on the host device of this module.*If it is difficult to describe this statement on the host product due to the size, please describe in theUser's manual.The following statements or equivalent must be described on the user manual of the host deviceof this module;This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Caution: Any changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipmenthas very low levels of RF energy that are deemed to comply without testing of specificabsorption rate(SAR).This transmitter must not be co-located or operated in conjunction with any other antenna ortransmitter.
OPERATION GUIDEOG_NK24Y_v08e Circuit Design, Inc.12Regulatory Statement for ICInstructions to the final system integratorsThe final system integrator must ensure there is no instruction provided in the user manual or customerdocumentation indicating how to install or remove the transmitter module.This module should be installed in the host device according to the interface specification.Labeling:IC Number: 6079A-NK24YThe proposed IC Number label format is to be placed on the module. If IC Number is not visible when themodule is installed into the system, “Contains IC: 6079A-NK24Y” shall be placed on the outside of finalhost system.The following statements or equivalent must be described on the user manual of the host deviceof this module;AntennaThis radio transmitter IC Number 6079A-NK24Y has been approved by Industry Canada to operatewith the antenna types listed below with the maximum permissible gain and required antennaimpedance for each antenna type indicated. Antenna types not included in this list, having a gaingreater than the maximum gain indicated for that type, are strictly prohibited for use with thisdevice.The antenna used this module is as follows;Antenna Type & Antenna Gain;Sleeve Antenna (ANT-2G4S2/ANT-2G4S3) 2.14 dBiPattern antenna -2.0 dBiCaution: Exposure to Radio Frequency RadiationThis equipment complies with IC radiation exposure limits set forth for an uncontrolledenvironment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Thisequipment has very low levels of RF energy that are deemed to comply without testing ofspecific absorption rate (SAR).Cet équipement est conforme aux limites d’ exposition aux rayonnements énoncées pour unenvironnement non contrôléet respecte les règles d’ exposition aux fréquencesradioélectriques (RF) CNR-102 de l’ IC. Cet équipement émet une énergie RF très faible quiest considérée conforme sans évaluation du débit d’ absorption spécifique (DAS).This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to thefollowing two conditions:(1) This device may not cause interference, and(2) This device must accept any interference, including interference that may cause undesiredoperation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage,(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d'en compromettre le fonctionnement.

Navigation menu