Circuit Design KST24W Wireless remote control transmitter User Manual OG KST2 4 v10e

Circuit Design, Inc. Wireless remote control transmitter OG KST2 4 v10e

05 User Manual

OOG_KST2䞉T䞉Tt䞉24_ThiTotouPle_v1spensuseease0erodsure.ekeductepreeptreqroppthiquirerasoresandopereledsaratioectriafeoongicalopeguidlaneratdefndrtionforWadin,plfutu1WaoknleasureatenowserrefeerwledreaereprdgedthncerooVefohise.Ce-ofOVerseopeCIR7N-mhtfreOpersetuperatRC755Nagail:ttp:OPemerionpantionUI57-ganF:in://wPEmoran1ndonguT-1Hno3TeFaxnfo@wwwERAotetio1.0opeuideDEHo399el:x:@cw.cATCecon0(OeratethESotak9-80202circcircTIOCircuconGOctionhoroSIGka,830263263cuitcuitONuitDntGuct..ougGNAz03J3-823-82tdetdeNGDesroui20hly,INzumJAP2-12-1esigesigGUsignollede017prioNCminPA0201gn.jgn.jIDn,Iere7)orC.noN246jpjpEnc.
OG_KST24_v1. Outline2. Features and applications3. System example4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED11. Battery replacement12. Paring with the receiver unitOG_KST24_v1. Outline2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED11. Battery replacement12. Paring with the receiver unitOG_KST24_v1. Outline2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED11. Battery replacement12. Paring with the receiver unitOG_KST24_v1. Outline2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED11. Battery replacement12. Paring with the receiver unitOG_KST24_v1. Outline................................2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED11. Battery replacement12. Paring with the receiver unitOG_KST24_v10e................................2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button8. Buzzer sound for buzzer operation9. Mute setting10. Link LED................................11. Battery replacement12. Paring with the receiver unit10e................................2. Features and applications3. System example3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions7. Power button................................8. Buzzer sound for buzzer operation9. Mute setting................................................................11. Battery replacement12. Paring with the receiver unit................................2. Features and applications3. System example................................3.1 Controls the KSR2.43.2 Controls the NK3.3 Operation of multiple systems in one area4. Main specifications5. External dimensions6. Part names and functions................................8. Buzzer sound for buzzer operation................................................................11. Battery replacement12. Paring with the receiver unit................................2. Features and applications................................3.1 Controls the KSR2.43.2 Controls the NK-2.4Y3.3 Operation of multiple systems in one area4. Main specifications................................5. External dimensions................................6. Part names and functions................................8. Buzzer sound for buzzer operation................................................................11. Battery replacement12. Paring with the receiver unit................................2. Features and applications................................3.1 Controls the KSR2.4................................2.4Y3.3 Operation of multiple systems in one area................................................................6. Part names and functions................................8. Buzzer sound for buzzer operation................................................................11. Battery replacement................................12. Paring with the receiver unit................................2. Features and applications................................................................2.4Y................................3.3 Operation of multiple systems in one area................................................................6. Part names and functions................................................................8. Buzzer sound for buzzer operation................................................................................................12. Paring with the receiver unit................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................8. Buzzer sound for buzzer operation................................................................................................12. Paring with the receiver unit................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................8. Buzzer sound for buzzer operation................................................................................................................................................................12. Paring with the receiver unit................................Contents................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................................................8. Buzzer sound for buzzer operation................................................................................................................................................................Contents................................................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................................................................................................................................................................................Contents................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................................................................................................................................................................................................................................................................................Contents................................................................................................................................................................................................3.3 Operation of multiple systems in one area................................................................................................................................................................................................................................................................................................2Contents................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Contents................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................OPERATION GUIDE................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDE................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDE................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc.............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc.......................................................................................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc..............................................................................................................................................................................................................................................................................................................PERATION GUIDECircuit Design, Inc..............3.............3.............................4..................4................4................4.........................5.......................6..............7...8...............................8....8......10...................10.......11Circuit Design, Inc.334444567888101011
OG_KST24_v1.KST2.4 W is aandindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.KST2.4WWirelessKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication status2.FeaturesApplicationsOG_KST24_v1.KST2.4 W is aandindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.KST2.4WWirelessKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication status2.FeaturesApplicationsOG_KST24_v1.OutlineKST2.4 W is aandharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.KST2.4WWirelessKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication status2.Features and applicationsFeaturesARIB STDIP2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.CRCLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)ApplicationsControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machineryERotary lights, alarm devicesCalling deviceOG_KST24_vOutlineKST2.4 W is aharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.KST2.4WWirelessremote controlKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applicationsFeaturesARIB STDP552 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.CRCLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)ApplicationsControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machineryElectric shuRotary lights, alarm devicesCalling deviceOG_KST24_vOutlineKST2.4 W is aharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeremote controlKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applicationsFeaturesARIB STD52 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.CRC-16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)ApplicationsControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerylectric shuRotary lights, alarm devicesCalling deviceOG_KST24_v10eOutlineKST2.4 W is ahighharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeremote controlKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applicationsARIB STD2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)ApplicationsControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerylectric shuRotary lights, alarm devicesCalling device10eOutlinehighharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeremote controlKSR2.4 or telecommand module NKN:1 is possible.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applicationsARIB STD-T662 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerylectric shutter, electric blind, garage doorRotary lights, alarm devicesCalling devicehigh-reliableharsh environmentsindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeremote controlKSR2.4 or telecommand module NKFrequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applicationsT66, FCC Part 15 compliant2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorRotary lights, alarm devicesCalling devicereliableharsh environmentsbyindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeremote controlsystemKSR2.4 or telecommand module NKFrequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliant2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorRotary lights, alarm devicesreliablebyenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typesystemKSR2.4 or telecommand module NKFrequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliant2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 1equipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorRotary lights, alarm devicesreliablewireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typesystemKSR2.4 or telecommand module NKFrequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliant2 to 4 control contactsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operation1 : 1 communication withCommunication range 100equipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorRotary lights, alarm deviceswireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typesystemcan be realized by combining withKSR2.4 or telecommand module NKFrequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliantFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionLong and stable operationon 2 x AAA batteries.1 : 1 communication withKSR2.400mequipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorRotary lights, alarm deviceswireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withKSR2.4 or telecommand module NK-Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliantFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.KSR2.4mLOS (depends on the operation circumstances and theequipment to be controlled.)Control of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorwireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining with-2.4Y.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliantFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.KSR2.4orLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorwireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining with2.4Y.Frequency hopping scheme enables simultaneous use of multican always check the communication statusFeatures and applications, FCC Part 15 compliantFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.orNKLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machineryControl of traffic light for road constructionOperation of agricultural machinerytter, electric blind, garage doorwireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining with2.4Y.The communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multican always check the communication statuswith the Link LED.Features and applications, FCC Part 15 compliantFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.NK-LOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machineryControl of traffic light for road constructiontter, electric blind, garage doorwireless remote controlenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiwith the Link LED.Features and applicationsFrequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.-2.4YLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machineryControl of traffic light for road constructiontter, electric blind, garage door3wireless remote controllerenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiwith the Link LED.Frequency hopping scheme enabling simultaneous uCommunication status monitor via Link LED.16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.2.4YLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerylerthatenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiwith the Link LED.Frequency hopping scheme enabling simultaneous u16 and Hamming distance of 6 to minimize malfunctionon 2 x AAA batteries.LOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerythatenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiwith the Link LED.Frequency hopping scheme enabling simultaneous u16 and Hamming distance of 6 to minimize malfunctionLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerythatcan be used safely even inenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiwith the Link LED.Frequency hopping scheme enabling simultaneous use of multiple systems within one area.16 and Hamming distance of 6 to minimize malfunctionLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerycan be used safely even inenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typecan be realized by combining withThe communication mode is 1:1 only and neither 1:N norFrequency hopping scheme enables simultaneous use of multiple systems within one area.with the Link LED.se of multiple systems within one area.16 and Hamming distance of 6 to minimize malfunctionLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerycan be used safely even inenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.can be selected from 2 button, 3 button, 4 button typeaccording to usage.can be realized by combining withthe remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.16 and Hamming distance of 6 to minimize malfunctionLOS (depends on the operation circumstances and theControl of construction, civil engineering, forestry machinerycan be used safely even inenhancing robustness and waterproofnessindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and theOPERATION GUIDEcan be used safely even inenhancing robustness and waterproofnessandindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDEcan be used safely even inandsuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDEcan be used safely even insuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDECircuit Design, Inc.can be used safely even insuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDECircuit Design, Inc.can be used safely even insuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.according to usage.the remote controlreceiverThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDECircuit Design, Inc.outdoor worksuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.receiverThe communication mode is 1:1 only and neither 1:N norple systems within one area.se of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDECircuit Design, Inc.outdoor worksuitable for variousindustrial applications such as civil engineering / construction, vehicles, welfare, agriculture.receiverThe communication mode is 1:1 only and neither 1:N norple systems within one area.Also, youse of multiple systems within one area.LOS (depends on the operation circumstances and thePERATION GUIDECircuit Design, Inc.outdoor worksuitable for variousreceiverThe communication mode is 1:1 only and neither 1:N norAlso, youse of multiple systems within one area.PERATION GUIDECircuit Design, Inc.outdoor worksuitable for variousThe communication mode is 1:1 only and neither 1:N norAlso, youse of multiple systems within one area.PERATION GUIDECircuit Design, Inc.outdoor workThe communication mode is 1:1 only and neither 1:N norAlso, youCircuit Design, Inc.The communication mode is 1:1 only and neither 1:N norAlso, you
OG_KST24_v3OG_KST24_v3.3.13.23.OG_KST24_v.System example3.13.2・・3.3・OG_KST24_vSystem example3.1Controls the3.2Controls the・1 : 1 communication only・Paring is needed for communication.3Operation of multiple systems in one area・Up to 10 systems are feasible for simultaneous operation in one area.OG_KST24_vSystem exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.OG_KST24_v10eSystem exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.10eSystem exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.System exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KST2.4WKST2.4WSystem exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KST2.4WKST2.4WSystem exampleControls theControls the1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KST2.4WKST2.4WSystem exampleControls theKSR2.4Controls theNK1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KST2.4WSystem exampleKSR2.4NK-2.4Y1 : 1 communication onlyParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KSR2.42.4YParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KSR2.42.4YParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.2.4YParing is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Paring is needed for communication.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.4Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.NKOperation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KSR2.4NK-2.4Y (Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KSR2.42.4Y (Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.KSR2.42.4Y (Output mode)Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Output mode)Operation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Output mode)OPERATION GUIDEOperation of multiple systems in one areaUp to 10 systems are feasible for simultaneous operation in one area.Output mode)PERATION GUIDEUp to 10 systems are feasible for simultaneous operation in one area.Output mode)PERATION GUIDEUp to 10 systems are feasible for simultaneous operation in one area.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.PERATION GUIDECircuit Design, Inc.Circuit Design, Inc.
OG_KST24_v4*Communication rang: approx.OG_KST24_v4.CompatiblestandardsFrequency rangeCommunicationmethodModulation methodCommunication bitrateError check methodHamming distanceRF output powerNumber of operationbuttonsBuzzerOperation responseIDAntennaBatteriesBattery lifeOperatingtemperature rangeIP ratingButton durabilityExternal dimensionsWeight*Communication rang: approx.OG_KST24_v.Main sCompatiblestandardsFrequency rangeCommunicationmethodModulation methodCommunication bitrateError check methodHamming distanceRF output powerNumber of operationbuttonsBuzzerOperation responseIDcode lengthAntennaBatteriesBattery lifeOperatingtemperature rangeIP ratingButton durabilityExternal dimensionsWeight*Communication rang: approx.OG_KST24_vMain sCompatiblestandardsFrequency rangeCommunicationmethodModulation methodCommunication bitrateError check methodHamming distanceRF output powerNumber of operationbuttonsBuzzerOperation responsecode lengthAntennaBatteriesBattery lifeOperatingtemperature rangeIP ratingButton durabilityExternal dimensionsWeight*Communication rang: approx.OG_KST24_vMain sItemCompatiblestandardsFrequency rangeCommunicationmethodModulation methodCommunication bitError check methodHamming distanceRF output powerNumber of operationbuttonsBuzzerOperation responsecode lengthAntennaBatteriesBattery lifeOperatingtemperature rangeIP ratingButton durabilityExternal dimensionsWeight*Communication rang: approx.OG_KST24_v10eMain specificationsItemCompatibleFrequency rangeCommunicationModulation methodCommunication bitError check methodHamming distanceRF output powerNumber of operationOperation responsecode lengthBattery lifeOperatingtemperature rangeButton durabilityExternal dimensions*Communication rang: approx.10epecificationsItemFrequency rangeCommunicationModulation methodCommunication bitError check methodHamming distanceRF output powerNumber of operationOperation responsecode lengthtemperature rangeButton durabilityExternal dimensions*Communication rang: approx.pecificationsFrequency rangeCommunicationModulation methodCommunication bitError check methodHamming distanceRF output powerNumber of operationOperation responsetemperature rangeButton durabilityExternal dimensions*Communication rang: approx.pecificationsModulation methodCommunication bitError check methodNumber of operationOperation responseExternal dimensions*Communication rang: approx.pecificationsARIB STDFCC Part 152403Frequency hopping, twoGFSK250 kbpsPayload6<KST2.4WKST2.4WKST2.4WBuzzer sound corresponding to eachbutton operation<40 bits in the payloadBuiltAAA x 2Approx.150 hours continuous use-20IP50120130 g*Communication rang: approx.pecificationsARIB STDFCC Part 152403Frequency hopping, twoGFSK250 kbpsPayload6<1 mWKST2.4WKST2.4WKST2.4WBuzzer sound corresponding to eachbutton operation<7040 bits in the payloadBuiltAAA x 2Approx.150 hours continuous use20°IP5550,000 times120×130 g*Communication rang: approx.100pecificationsARIB STDFCC Part 152403toFrequency hopping, twoGFSK250 kbpsPayload1 mWKST2.4WKST2.4WKST2.4WBuzzer sound corresponding to eachbutton operation70ms40 bits in the payloadBuilt-in pattern antennaAAA x 2Approx.150 hours continuous use°Cto5,000 times×43130 g100pecificationsARIB STDFCC Part 15to2479Frequency hopping, two250 kbpsPayloadCRC161 mW(nominal)KST2.4W-KST2.4W-KST2.4W-Buzzer sound corresponding to eachbutton operationms40 bits in the payloadin pattern antennaAAA x 2Approx.150 hours continuous useto+60,000 times43×100mpecificationsARIB STD-T66FCC Part 152479Frequency hopping, twoCRC16(nominal)-2: 2-3:3 buttons-4:4 buttonsBuzzer sound corresponding to eachbutton operation40 bits in the payloadin pattern antennaApprox.150 hours continuous use+60,000 times×29.5 mmLOS (communication with KSSpecificaT66MHzFrequency hopping, twoCRC16(nominal)2: 2buttons3 buttons4 buttonsBuzzer sound corresponding to eachbutton operation40 bits in the payloadin pattern antennaApprox.150 hours continuous use+60°C29.5 mmLOS (communication with KSSpecificaMHzFrequency hopping, two+Packet(nominal)buttons3 buttons4 buttonsBuzzer sound corresponding to eachbutton operation40 bits in the payloadin pattern antennaApprox.150 hours continuous useC29.5 mmLOS (communication with KSSpecificaFrequency hopping, twoPacketbuttons3 buttons4 buttonsBuzzer sound corresponding to each40 bits in the payloadin pattern antennaApprox.150 hours continuous use29.5 mmLOS (communication with KS5SpecificationFrequency hopping, two-Packetbuttons+power button3 buttons+power button4 buttons+power buttonBuzzer sound corresponding to eachin pattern antennaApprox.150 hours continuous useLOS (communication with KStionwayPacketCRC16power buttonpower buttonpower buttonBuzzer sound corresponding to eachApprox.150 hours continuous useLOS (communication with KSwayCRC16power buttonpower buttonpower buttonBuzzer sound corresponding to eachApprox.150 hours continuous useLOS (communication with KSCRC16power buttonpower buttonpower buttonBuzzer sound corresponding to eachApprox.150 hours continuous useLOS (communication with KSpower buttonpower buttonpower buttonBuzzer sound corresponding to eachLOS (communication with KSpower buttonpower buttonpower buttonLOS (communication with KSLOS (communication with KSR2.4OPERATION GUIDEMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsIncluding batteriesR2.4+APERATION GUIDEMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteries+ANTPERATION GUIDEMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteriesNT-2400PERATION GUIDECircuit Design, Inc.RemarksMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteries2400PERATION GUIDECircuit Design, Inc.RemarksMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteries2400-SFPERATION GUIDECircuit Design, Inc.RemarksMute setting availableButton operationon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteriesSF)PERATION GUIDECircuit Design, Inc.RemarksMute setting availableButton operation-> Outputon the receiver unitOperation button 1 to 4Excluding protrusionsncluding batteriesPERATION GUIDECircuit Design, Inc.Mute setting available> OutputOperation button 1 to 4Excluding protrusionsPERATION GUIDECircuit Design, Inc.> OutputOperation button 1 to 4PERATION GUIDECircuit Design, Inc.> OutputCircuit Design, Inc.
OG_KST24_v5OG_KST24_v5.External dimensionsOG_KST24_vExternal dimensionsOG_KST24_vExternal dimensionsOG_KST24_v10eExternal dimensionsExternal dimensionsExternal dimensionsExternal dimensionsExternal dimensionsExternal dimensions66Circuit Design, Inc.Circuit Design, Inc.OPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.OPERATION GUIDEOPERATION GUIDEOPERATION GUIDEOPERATION GUIDE
OG_KST24_v6BuiltPower buttonButton 1 to 4LinkBatteryBuzzer sound holeProduct labelBattery coverStrap haVent holeOG_KST24_v6.BuiltPower buttonButton 1 to 4LinkBatteryBuzzer sound holeProduct labelBattery coverStrap haVent holeBattery LEDOG_KST24_v.Part names and functionsBuilt-in antennaPower buttonButton 1 to 4LinkLEDBatteryBuzzer sound holeProduct labelBattery coverStrap haVent holeBattery LEDOG_KST24_vPart names and functionsin antennaPower buttonButton 1 to 4LEDBatteryLEDBuzzer sound holeProduct labelBattery coverStrap hangerVent holeBattery LEDOG_KST24_vPart names and functionsin antennaPower buttonButton 1 to 4LEDBuzzer sound holeProduct labelBattery coverngerOG_KST24_v10ePart names and functionsin antennaPower buttonButton 1 to 4Buzzer sound holeProduct labelBattery covernger10ePart names and functionsBuzzer sound holePart names and functionsPart names and functionsPart names and functionsPart names and functionsA builtPress and hold to turn the power onKST2.4Wrespectively.Lcommunication is not established. It turns off whenFbatterWhenestablished,emitted.When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.Built(inside)Link LEDButton 2Button 1Button 3Vent holeButton 4Part names and functionsA builtPress and hold to turn the power onKST2.4Wrespectively.Lights green when communication is established. Flashes whencommunication is not established. It turns off whenFlashes in red when the battery voltage is low. Please replace thebatterWhenestablished,emitted.Button 1 ...Button 2 ...Button 3 ...Button 4 ...When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.Built-in-antenna(inside)Link LEDPowerbuttonButton 2Button 1Button 3Vent holeButton 4Part names and functionsA built-in antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wrespectively.ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thebatteries.Whenthe operation button is pressed andestablished,emitted.Button 1 ...Button 2 ...Button 3 ...Button 4 ...When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.antennaLink LEDPowerbuttonButton 2Button 1Button 3Vent holeButton 4Part names and functionsin antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4W-respectively.ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace theies.the operation button is pressed andestablished,emitted.Button 1 ...Button 2 ...Button 3 ...Button 4 ...When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.antennaPart names and functionsin antenna is included. Do not cover this part with your hand.Press and hold to turn the power on-2,KST2.4Wrespectively.ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andestablished,the operation sound corresponding to each button isButton 1 ...peep (one time)Button 2 ...peepButton 3 ...toot (one time)Button 4 ...When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.Part names and functionsin antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peeptoot (one time)Button 4 ...tootWhen the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityMark (Japan).Open the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.Part names and functionsin antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peep-peep (two times)toot (one time)toot-toot (two times)When the battery voltage decreases, the battery LED turns redthe operation soundreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.7in antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peep (two times)toot (one time)toot (two times)When the battery voltage decreases, the battery LED turns redthe operation soundgoes lowreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.in antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4W-3,ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peep (two times)toot (one time)toot (two times)When the battery voltage decreases, the battery LED turns redgoes lowreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Hanger for strap and key ring.Do not cover the hole.in antenna is included. Do not cover this part with your hand.Press and hold to turn the power on,KST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peep (two times)toot (one time)toot (two times)When the battery voltage decreases, the battery LED turns redgoes lowreplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Hanger for strap and key ring.in antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (one time)peep (two times)toot (two times)When the battery voltage decreases, the battery LED turns redgoes low. If the operation sound creplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Hanger for strap and key ring.Product labelBuzzer sound holeBattery coverCoinin antenna is included. Do not cover this part with your hand.Press and hold to turn the power onKST2.4Wights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (two times)toot (two times)When the battery voltage decreases, the battery LED turns red. If the operation sound creplace the battery immediately.If mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Product labelBuzzer sound holeBattery coverCoin-screwin antenna is included. Do not cover this part with your hand.Press and hold to turn the power on/off.KST2.4W-4ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button ispeep (two times)When the battery voltage decreases, the battery LED turns red. If the operation sound cIf mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Product labelBuzzer sound holeBattery coverscrewin antenna is included. Do not cover this part with your hand.off.4have two, three, four buttons,ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound cIf mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOpen the cover for battery replacement.Product labelBuzzer sound holeBattery coverscrewOPERATION GUIDEin antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe operation button is pressed andthe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound cIf mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityBuzzer sound holeOPERATION GUIDEin antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound cIf mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityOPERATION GUIDEin antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whencommunication is not established. It turns off whenlashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound cIf mute is set, no operation sound will be emitted.Do not remove. The label includes FCC ID and Technical ConformityStrap hangerOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whencommunication is not established. It turns off whenthe power is OFF.lashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound cDo not remove. The label includes FCC ID and Technical ConformityStrap hangerOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whenthe power is OFF.lashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns red. If the operation sound changes,Do not remove. The label includes FCC ID and Technical ConformityStrap hangerOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whenthe power is OFF.lashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns redhanges,Do not remove. The label includes FCC ID and Technical ConformityStrap hangerOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whenthe power is OFF.lashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns redhanges,Do not remove. The label includes FCC ID and Technical ConformityOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,ights green when communication is established. Flashes whenthe power is OFF.lashes in red when the battery voltage is low. Please replace thethe communication isthe operation sound corresponding to each button isWhen the battery voltage decreases, the battery LED turns redandhanges,Do not remove. The label includes FCC ID and Technical ConformityOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,the power is OFF.lashes in red when the battery voltage is low. Please replace thethe operation sound corresponding to each button isandDo not remove. The label includes FCC ID and Technical ConformityOPERATION GUIDECircuit Design, Inc.in antenna is included. Do not cover this part with your hand.have two, three, four buttons,the power is OFF.Do not remove. The label includes FCC ID and Technical ConformityOPERATION GUIDECircuit Design, Inc.
OG_KST24_v7By pressing and holding the power buttoncommunication with theLWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.Ithe*When the mute setting is ON, the buzz*8Since theoperatedtransmitted to the*When the mute setting is ON, the buzzer does no function.9With theThe muteOG_KST24_v7.By pressing and holding the power buttoncommunication with theLink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.If the state in which no buttonthe*When the mute setting is ON, the buzz*For details on changing the auto power off time, please consult8.Since theoperatedtransmitted to the*When the mute setting is ON, the buzzer does no function.9.With theThe muteOG_KST24_v.Power buttonBy pressing and holding the power buttoncommunication with theink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttontheauto*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consult.Buzzer soundSince theoperatedtransmitted to the*When the mute setting is ON, the buzzer does no function..Mute settingWith theThe muteStep 1SteStepStepStepOG_KST24_vPower buttonBy pressing and holding the power buttoncommunication with theink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonauto-*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer soundSince theoperatedwithtransmitted to the*When the mute setting is ON, the buzzer does no function.Mute settingWith theKSTThe muteStep 1StepStepStepStepOG_KST24_vPower buttonBy pressing and holding the power buttoncommunication with theink LEDblinksWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no button-power*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer soundSince theKSTwithtransmitted to the*When the mute setting is ON, the buzzer does no function.Mute settingKSTThe muteON/OFF settingStep 1p2Step3Step4Step5OG_KST24_v10ePower buttonBy pressing and holding the power buttoncommunication with theblinksWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonpower*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer soundKST-2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arewithcommunication establishedtransmitted to the*When the mute setting is ON, the buzzer does no function.Mute settingKST-2.4WON/OFF settingHold down the power button while pressingbuttons 1 and 2The buzzer soundRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsoperation.Release the button 2The buzzer*The power turnsoperation.Release the power button.The buzzer pips*The power turnsoperation.Press the button 1.The buzzer*To stopbutton.10ePower buttonBy pressing and holding the power buttoncommunication with theblinksin green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offa buzzer sound.initial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonpower-off function*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer sound2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedtransmitted to thereceiver unit.*When the mute setting is ON, the buzzer does no function.Mute setting2.4WON/OFF settingHold down the power button while pressingbuttons 1 and 2The buzzer soundRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsoperation.Release the button 2The buzzer*The power turnsoperation.Release the power button.The buzzer pips*The power turnsoperation.Press the button 1.The buzzer*To stopbutton.Power buttonBy pressing and holding the power buttoncommunication with thein green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonoff function*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer sound2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedreceiver unit.*When the mute setting is ON, the buzzer does no function.Mute setting2.4W, the buzzer sound can be muted by setting theON/OFF settingHold down the power button while pressingbuttons 1 and 2The buzzer soundRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsoperation.Release the button 2The buzzer*The power turnsoperation.Release the power button.The buzzer pips*The power turnsoperation.Press the button 1.The buzzer*To stopbutton.Power buttonBy pressing and holding the power buttoncommunication with thein green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonoff function*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer sound2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedreceiver unit.*When the mute setting is ON, the buzzer does no function.Mute setting, the buzzer sound can be muted by setting theON/OFF settingHold down the power button while pressingbuttons 1 and 2The buzzer soundRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsoperation.Release the button 2The buzzerpeeps*The power turnsoperation.Release the power button.The buzzer pips*The power turnsoperation.Press the button 1.The buzzerpeeps once*To stopmute settingPower buttonBy pressing and holding the power buttoncommunication with thereceiver unitin green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonoff function*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer sound2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedreceiver unit.*When the mute setting is ON, the buzzer does no function.Mute setting, the buzzer sound can be muted by setting theON/OFF settingprocedureHold down the power button while pressingbuttons 1 and 2The buzzer soundRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsRelease the button 2peeps*The power turnsRelease the power button.The buzzer pips*The power turnsPress the button 1.peeps oncemute settingPower buttonBy pressing and holding the power buttonreceiver unitin green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no buttonoff functionautomatically turn*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultBuzzer soundfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedreceiver unit.*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theprocedureProceduresHold down the power button while pressingbuttons 1 and 2.The buzzer soundsRelease the button 1.The buzzer sound changes after 3 seconds.*The power turnsoffRelease the button 2peepstwice*The power turnsoffRelease the power button.The buzzer pipstwice*The power turnsoffPress the button 1.peeps oncemute settingBy pressing and holding the power buttonreceiver unitin green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.f the state in which no button(1 to 4)automatically turn*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication establishedreceiver unit.*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theprocedureProceduresHold down the power button while pressingsafter 3 seconds.Release the button 1.The buzzer sound changes after 3 seconds.offRelease the button 2.twiceoffRelease the power button.twice.offPress the button 1.peeps oncemute settingBy pressing and holding the power buttonreceiver unitin green, and theWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.(1 to 4)automatically turn*When the mute setting is ON, the buzzFor details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication established*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theproceduresProceduresHold down the power button while pressingafter 3 seconds.Release the button 1.The buzzer sound changes after 3 seconds.after 10 seconds elapse without.twice.after 10 seconds elapse withoutRelease the power button..after 10 seconds elapse withoutpeeps once.mute setting, press and hold the powerBy pressing and holding the power buttonreceiver unitin green, and theLink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.(1 to 4)automatically turn*When the mute setting is ON, the buzzer does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication established*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting thesare as follows:ProceduresHold down the power button while pressingafter 3 seconds.The buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutRelease the power button.after 10 seconds elapse without, press and hold the powerBy pressing and holding the power buttonreceiver unitstartink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurus for changes in auto power off time.(1 to 4)are operated continues for 10 minutes (initial setting),automatically turner does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 arecommunication established,you can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theare as follows:Hold down the power button while pressingafter 3 seconds.The buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerBy pressing and holding the power button,startsink LEDWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),automatically turner does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theare as follows:Hold down the power button while pressingafter 3 seconds.The buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the power,the power is turned ons. When communication is not estabink LEDlightsWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),automatically turner does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theare as follows:Hold down the power button while pressingafter 3 seconds.The buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the power8the power is turned on. When communication is not establightsWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),automatically turnsoffer does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theare as follows:Hold down the power button while pressingThe buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerthe power is turned on. When communication is not establightswhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),offtheer does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theare as follows:Hold down the power button while pressingThe buzzer sound changes after 3 seconds.after 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerthe power is turned on. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),theer does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theHold down the power button while pressingafter 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerthe power is turned on. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),thepowerer does no function.For details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably*When the mute setting is ON, the buzzer does no function., the buzzer sound can be muted by setting theHold down the power button while pressingtheafter 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerthe power is turned on. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),powerFor details on changing the auto power off time, please consultfor buzzer operation2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably, the buzzer sound can be muted by setting thetheafter 10 seconds elapse withoutafter 10 seconds elapse withoutafter 10 seconds elapse without, press and hold the powerthe power is turned on. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),power.For details on changing the auto power off time, please consultCircuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliably, the buzzer sound can be muted by setting themute function ON.Buzzer:LinkBuzzer:LinkBuzzer: PeepLinkBuzzer:Battery LED: OnLinkBuzzer:Battery LED: OffLinkthe power is turned on. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when theinitial setting) the button 1 to 4 are not operated, the power turns off automatically. * Whenthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),Circuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.Buzzer:LinkLEDBuzzer:LinkLEDBuzzer: PeepLinkLEDBuzzer:Battery LED: OnLinkLEBuzzer:Battery LED: OffLinkLEOPERATION GUIDEthe power is turned onwith a buzzer sound. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operBy pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * Whenthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),Circuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.BuzzerBuzzer:Long peepLEDBuzzer:Short peepLEDBuzzer: PeepLEDBuzzer:PipBattery LED: OnLE: OffBuzzer:Short peep (once)Battery LED: OffLEDOPERATION GUIDEwith a buzzer sound. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofso you can determine whether communication is possible before operation.By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * Whenthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),Circuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.BuzzerLong peepLED: BlinkShort peepLED: BlinkBuzzer: PeepLED: BlinkPip-pip (twice)Battery LED: On: OffShort peep (once)Battery LED: OffD: OnOPERATION GUIDEwith a buzzer sound. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofation.By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * Whenthe mute setting is ON, it does not sound that the buzzer does not occurare operated continues for 10 minutes (initial setting),Circuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.BuzzerLong peep: BlinkShort peep: BlinkBuzzer: Peep-peep (twice): Blinkpip (twice)Battery LED: OnShort peep (once)Battery LED: Off: OnOPERATION GUIDECircuit Design, Inc.with a buzzer sound. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state ofation.By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * Whenthe mute setting is ON, it does not sound that the buzzer does not occur※are operated continues for 10 minutes (initial setting),Circuit Design, Inc.2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.soundLong peepShort peeppeep (twice)pip (twice)Battery LED: OnShort peep (once)Battery LED: OffOPERATION GUIDECircuit Design, Inc.with a buzzer sound. When communication is not estabwhen communication is establishedWhile the power is on, communication is performed regardless of the state of1 to 4ation.By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),Circuit Design, Inc..2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablymute function ON.soundLong peep(repeated)Short peep.(repeated).peep (twice)pip (twice)Short peep (once)OPERATION GUIDECircuit Design, Inc.with a buzzer sound. When communication is not established, thewhen communication is established1 to 4By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablysound/LED(repeated).(repeated).peep (twice)Short peep (once)OPERATION GUIDECircuit Design, Inc.with a buzzer soundlished, thewhen communication is established1 to 4By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablyLED(repeated).(repeated).peep (twice)Short peep (once)OPERATION GUIDECircuit Design, Inc.with a buzzer soundlished, thewhen communication is established.1 to 4buttons,By pressing and holding the power button while the power is on, the power is turned offAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areyou can check whether the operation was reliablyLED(repeated).(repeated).OPERATION GUIDECircuit Design, Inc.andlished, thebuttons,By pressing and holding the power button while the power is on, the power is turned offwithAlso, if the auto power off function continues for 10 minutes (when thens off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areOPERATION GUIDECircuit Design, Inc.andbuttons,withns off automatically. * WhenPlease contactare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 areOPERATION GUIDECircuit Design, Inc.buttons,withare operated continues for 10 minutes (initial setting),2.4W will emit a buzzer sound as an operation sound only when the buttons 1 to 4 are
OG_KST24_vOG_KST24_vOG_KST24_vStepEndOG_KST24_vStepEndOG_KST24_vStep6EndOG_KST24_v10eTo set the mute function to OFF, press the button1.To set the mute function to ON, press the button2.*To stop mute setting, press and hold the powerbutton.When setting is done, the power turns ofautomatically.10eTo set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the button2.The buzzer peeps twice.*To stop mute setting, press and hold the powerbutton.When setting is done, the power turns ofautomatically.To set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerbutton.When setting is done, the power turns ofautomatically.To set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofautomatically.To set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofautomatically.To set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonThe buzzer peeps once.To set the mute function to ON, press the buttonThe buzzer peeps twice.*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns of9To set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns ofTo set the mute function to OFF, press the buttonTo set the mute function to ON, press the button*To stop mute setting, press and hold the powerWhen setting is done, the power turns offMute OFFBuzzer sound: Peep (once)Mute ONBuzzer sound: Peep・LEDMute OFFBuzzer sound: Peep (once)Mute ONBuzzer sound: PeepLEDs offOPERATION GUIDEMute OFFBuzzer sound: Peep (once)Mute ONBuzzer sound: Peeps offOPERATION GUIDEMute OFFBuzzer sound: Peep (once)Buzzer sound: Peeps offOPERATION GUIDEBuzzer sound: Peep (once)Buzzer sound: PeepOPERATION GUIDECircuit Design, Inc.Buzzer sound: Peep (once)Buzzer sound: PeepOPERATION GUIDECircuit Design, Inc.Buzzer sound: Peep (once)Buzzer sound: Peep-peep (twice)OPERATION GUIDECircuit Design, Inc.Buzzer sound: Peep (once)peep (twice)OPERATION GUIDECircuit Design, Inc.Buzzer sound: Peep (once)peep (twice)OPERATION GUIDECircuit Design, Inc.peep (twice)OPERATION GUIDECircuit Design, Inc.peep (twice)OPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.
OG_KST24_v10ThelinkrestartsKST2.4W cannot control the receiver unit.restarts and1The Bsound willfollowing procedure (AAA batteries × 2).OG_KST24_v10ThelinkrestartsKST2.4W cannot control the receiver unit.restarts and11The Bsound willfollowing procedure (AAA batteries × 2).1.2.3.Replace the battery cover and tighten the screw securely.OG_KST24_v10.Link LEDTheLink LEDlinkis disconnected while the button is ON, therestartsKST2.4W cannot control the receiver unit.restarts and1.Battery replacementThe Battery LED willsound willfollowing procedure (AAA batteries × 2).Remove the battery cover.ReplacReplace the battery cover and tighten the screw securely.OG_KST24_vLink LEDink LEDis disconnected while the button is ON, therestartswhile the button isKST2.4W cannot control the receiver unit.restarts andBattery replacementattery LED willsound willfollowing procedure (AAA batteries × 2).Remove the battery cover.ReplacReplace the battery cover and tighten the screw securely.OG_KST24_vLink LEDink LEDis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.restarts andtheBattery replacementattery LED willsound willbecome lowfollowing procedure (AAA batteries × 2).Remove the battery cover.Replace the battery paying attention toReplace the battery cover and tighten the screw securely.OG_KST24_v10eLink LEDink LEDis onis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.theBattery replacementattery LED willbecome lowfollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.10eLink LEDis onis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.theLink LEDBattery replacementattery LED willbecome lowfollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.Link LEDis onwhenis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.ink LEDBattery replacementattery LED willflash whenbecome lowfollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.whenis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.ink LEDBattery replacementflash whenbecome low. When thefollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.whenthe KST2.4W isis disconnected while the button is ON, thewhile the button isKST2.4W cannot control the receiver unit.ink LEDwill turn back on.Battery replacementflash when. When thefollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.the KST2.4W isis disconnected while the button is ON, thewhile the button isstillKST2.4W cannot control the receiver unit.will turn back on.Battery replacementflash when. When thefollowing procedure (AAA batteries × 2).Remove the battery cover.e the battery paying attention toReplace the battery cover and tighten the screw securely.the KST2.4W isis disconnected while the button is ON, thestillON, the link LED goes into a highKST2.4W cannot control the receiver unit.will turn back on.Battery replacementflash whenthe. When thefollowing procedure (AAA batteries × 2).e the battery paying attention toReplace the battery cover and tighten the screw securely.the KST2.4W isis disconnected while the button is ON, theN, the link LED goes into a highKST2.4W cannot control the receiver unit.will turn back on.Battery replacementthebattery. When theBattery LED flashes, replace the batteries according to thefollowing procedure (AAA batteries × 2).e the battery paying attention toReplace the battery cover and tighten the screw securely.the KST2.4W isis disconnected while the button is ON, theN, the link LED goes into a highKST2.4W cannot control the receiver unit.will turn back on.Battery replacementbatteryattery LED flashes, replace the batteries according to thefollowing procedure (AAA batteries × 2).e the battery paying attention toReplace the battery cover and tighten the screw securely.the KST2.4W iscommunicating with theis disconnected while the button is ON, theN, the link LED goes into a highKST2.4W cannot control the receiver unit.will turn back on.Battery replacementbatteryattery LED flashes, replace the batteries according to thee the battery paying attention toReplace the battery cover and tighten the screw securely.communicating with theis disconnected while the button is ON, theN, the link LED goes into a highKST2.4W cannot control the receiver unit.I this case, by releasing the button, normal operationwill turn back on..batteryvoltageattery LED flashes, replace the batteries according to thee the battery paying attention totheReplace the battery cover and tighten the screw securely.communicating with theis disconnected while the button is ON, theN, the link LED goes into a highI this case, by releasing the button, normal operationvoltageattery LED flashes, replace the batteries according to thethepolarity.Replace the battery cover and tighten the screw securely.10communicating with theis disconnected while the button is ON, theLN, the link LED goes into a highI this case, by releasing the button, normal operationvoltageis low. If it declines further, theattery LED flashes, replace the batteries according to thepolarity.Replace the battery cover and tighten the screw securely.10communicating with theLink LED blinksN, the link LED goes into a highI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to thepolarity.Replace the battery cover and tighten the screw securely.communicating with theink LED blinksN, the link LED goes into a highI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theReplace the battery cover and tighten the screw securely.communicating with theink LED blinksN, the link LED goes into a highI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theReplace the battery cover and tighten the screw securely.communicating with theink LED blinksN, the link LED goes into a highI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to thecommunicating with thereceiver unit.ink LED blinksN, the link LED goes into a high-I this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to thereceiver unit.ink LED blinksand then i-speed blinking stateI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theOPERATION GUIDEreceiver unit.and then ispeed blinking stateI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theOPERATION GUIDEreceiver unit.and then ispeed blinking stateI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theOPERATION GUIDEreceiver unit.and then ispeed blinking stateI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.receiver unit.Ifand then ifthe communicationspeed blinking stateI this case, by releasing the button, normal operationis low. If it declines further, theattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.the communicationthe communicationspeed blinking stateI this case, by releasing the button, normal operationoperationattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.the communicationthe communicationspeed blinking stateI this case, by releasing the button, normal operationoperationattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.the communicationthe communicationin which theI this case, by releasing the button, normal operationoperationattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.the communicationthe communicationin which theI this case, by releasing the button, normal operationoperationbuzzerattery LED flashes, replace the batteries according to theOPERATION GUIDECircuit Design, Inc.the communicationthe communicationin which theI this case, by releasing the button, normal operationbuzzerOPERATION GUIDECircuit Design, Inc.the communicationthe communicationin which theI this case, by releasing the button, normal operationbuzzerOPERATION GUIDECircuit Design, Inc.the communicationthe communicationin which theI this case, by releasing the button, normal operation
OG_KST24_v1Preparation* When paring is done, the power turns off automatically. Press and hold the power button again torestart.OG_KST24_v12In order to usecommunicates on a 1: 1 basis.・・invalid.PreparationStep 1Step 2Step 3Step 4* When paring is done, the power turns off automatically. Press and hold the power button again torestart.OG_KST24_v2.Paring with the receiver unitIn order to usecommunicates on a 1: 1 basis.・The KST2.4W is shipped from the factory without paring.・When paring is newly performed with another receiver unit,invalid.PreparationStep 1Step 2Step 3Step 4End* When paring is done, the power turns off automatically. Press and hold the power button again torestart.OG_KST24_vParing with the receiver unitIn order to usecommunicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,invalid.PreparationStep 1Step 2Step 3Step 4End* When paring is done, the power turns off automatically. Press and hold the power button again torestart.OG_KST24_vParing with the receiver unitIn order to usecommunicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,invalid.Preparation* When paring is done, the power turns off automatically. Press and hold the power button again toOG_KST24_v10eParing with the receiver unitIn order to usecommunicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby sta*Please see thereceiver unit.Set theHold down the power button while pressing thebutton 1.ReleaRegistrationPress the button 1.The LED of the target receiver units is turned on.RegistrationPress the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again to10eParing with the receiver unitIn order to usethecommunicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby sta*Please see thereceiver unit.Set theHold down the power button while pressing thebutton 1.ReleaRegistrationPress the button 1.The LED of the target receiver units is turned on.RegistrationPress the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitthecommunicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby sta*Please see thereceiver unit.Set theHold down the power button while pressing thebutton 1.Release the button 1 and power buRegistrationPress the button 1.The LED of the target receiver units is turned on.RegistrationPress the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unittheKST2.4W, it is necessary to pair with the target receiver.communicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby sta*Please see thereceiver unit.Set theKST2.4WHold down the power button while pressing thebutton 1.e the button 1 and power buRegistrationPress the button 1.The LED of the target receiver units is turned on.RegistrationPress the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.communicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby sta*Please see thereceiver unit.KST2.4WHold down the power button while pressing thee the button 1 and power buRegistrationPress the button 1.The LED of the target receiver units is turned on.RegistrationPress the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.communicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby sta*Please see theKST2.4WHold down the power button while pressing thee the button 1 and power buRegistration1Press the button 1.The LED of the target receiver units is turned on.Registration2Press the buttonThe LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.communicates on a 1: 1 basis.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby sta*Please see theKST2.4Wto the paring mode.Hold down the power button while pressing thee the button 1 and power buPress the button 1.The LED of the target receiver units is turned on.Press the button2.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby sta*Please see theoperationto the paring mode.Hold down the power button while pressing thee the button 1 and power buPress the button 1.The LED of the target receiver units is turned on.2.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby stat* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby staoperationto the paring mode.Hold down the power button while pressing thee the button 1 and power buThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normaloperation (standby state).* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby staoperationto the paring mode.Hold down the power button while pressing thee the button 1 and power buThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normale).* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Paring procedurePut the target receiver in the pairing standby staoperationmanual ofto the paring mode.Hold down the power button while pressing thee the button 1 and power buThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby stamanual ofto the paring mode.Hold down the power button while pressing thee the button 1 and power buThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again to11Paring with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby stamanual ofto the paring mode.Hold down the power button while pressing thee the button 1 and power button.The LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again to11Paring with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby stamanual ofto the paring mode.Hold down the power button while pressing thetton.The LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toParing with the receiver unitKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby stamanual ofHold down the power button while pressing thetton.The LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby stamanual oftheHold down the power button while pressing theThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,Put the target receiver in the pairing standby state.thetargetHold down the power button while pressing theThe LED of the target receiver units is turned on.The LED of the target receiver units is turned on.When paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toKST2.4W, it is necessary to pair with the target receiver.The KST2.4W is shipped from the factory without paring.When paring is newly performed with another receiver unit,te.targetHold down the power button while pressing theWhen paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toKST2.4W, it is necessary to pair with the target receiver.When paring is newly performed with another receiver unit,the previous paring will betargetHold down the power button while pressing theWhen paring is done, the power turns off automatically.The target receiver unit goes back to the normal* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDEKST2.4W, it is necessary to pair with the target receiver.the previous paring will beBuzzer: PeepLink LBuzzer: PipBattery LED: OnLinkBuzzer: Short peep (once)Battery LED: OffLinkBuzzer: Peep(three times)Battery LED: OnLinkLEDs off* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDEKST2.4W, it is necessary to pair with the target receiver.the previous paring will beBuzzer: PeepLink LBuzzer: PipBattery LED: OnLinkLEDBuzzer: Short peep (once)Battery LED: OffLinkLEDBuzzer: Peep(three times)Battery LED: OnLinkLEDLEDs off* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDEKST2.4W, it is necessary to pair with the target receiver.Thethe previous paring will beBuzzerBuzzer: PeepLink LEDBuzzer: PipBattery LED: OnLEDBuzzer: Short peep (once)Battery LED: OffLEDBuzzer: Peep(three times)Battery LED: OnLEDLEDs off* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.Thethe previous paring will beBuzzerBuzzer: PeepED: BlinkBuzzer: PipBattery LED: OnLED: OffBuzzer: Short peep (once)Battery LED: OffLED: OnBuzzer: Peep(three times)Battery LED: OnLED: OnLEDs off* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.TheKST2the previous paring will beBuzzersoundBuzzer: Peep-: BlinkBuzzer: Pip-pip (twice)Battery LED: On: OffBuzzer: Short peep (once)Battery LED: Off: OnBuzzer: Peep-(three times)Battery LED: On: On* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.KST2the previous paring will besound-peep (twice): Blinkpip (twice)Battery LED: OnBuzzer: Short peep (once)Battery LED: Off-peepBattery LED: On* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.KST2.4Wthe previous paring will besound/LEDpeep (twice)pip (twice)Buzzer: Short peep (once)peep-* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc..4Wthe previous paring will be/LEDpeep (twice)pip (twice)Buzzer: Short peep (once)-pee* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.the previous paring will be/LEDpeep (twice)Buzzer: Short peep (once)pee* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.peep (twice)Buzzer: Short peep (once)* When paring is done, the power turns off automatically. Press and hold the power button again toOPERATION GUIDECircuit Design, Inc.
OG_KST24_vRegulatory Statement for FCCFCC ID: V9XThis deviceconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter musttransmitter.Caution:compliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofRF energyNote: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:———connected.—OG_KST24_vRegulatory Statement for FCCFCC ID: V9X-KST24WThis deviceconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter musttransmitter.Caution:compliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofRF energyNote: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuiconnected.—Consult the dealer or an experienced radio/TV technician for help.OG_KST24_vRegulatory Statement for FCCThis deviceconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter musttransmitter.Caution:compliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofRF energyNote: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiconnected.Consult the dealer or an experienced radio/TV technician for help.OG_KST24_vRegulatory Statement for FCCThis deviceconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter musttransmitter.Caution:Any changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofRF energyNote: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiconnected.Consult the dealer or an experienced radio/TV technician for help.OG_KST24_vRegulatory Statement for FCCThis deviceconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter musttransmitter.Any changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofRF energythat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiconnected.Consult the dealer or an experienced radio/TV technician for help.OG_KST24_v10eRegulatory Statement for FCCThis devicecomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter mustAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.10eRegulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter mustAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter mustAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationRegulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.This transmitter mustnot be coAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationRegulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.not be coAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationRegulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.not be coAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radiwill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationRegulatory Statement for FCCcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.not be coAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.not be co-located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationcomplies with part 15 of the Fconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationcomplies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.Caution: Exposure to radio frequency radiationThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.12Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuiConsult the dealer or an experienced radio/TV technician for help.12Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.t different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.t different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:Increase the separation between the equipment and receiver.t different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.Regulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productcompliance could void the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isConsult the dealer or an experienced radio/TV technician for help.OPERATION GUIDERegulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDERegulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDERegulatory compliance informationCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.located or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This equipment generatesradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofthat is deemed to comply without testing of specific absorption rate (SAR)Note: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionagainst harmful interference in a residential installation. This equipment generates,radiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protection,uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,encouraged to try to correct the interference by one or more of the following measures:t different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionuses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on,the user ist different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionuses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio orthe user ist different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionuses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio orthe user ist different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionuses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio orthe user ist different from that to which the receiver isOPERATION GUIDECircuit Design, Inc.CC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device must accept anylocated or operated in conjunction with any other antenna orAny changes or modifications not expressly approved by the party responsible for productThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environmentand meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels ofNote: This equipment has been tested and found to comply with the limits for a Class B digital device,asonable protectionuses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, mayo communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmful interference to radio orthe user ist different from that to which the receiver is
OG_KST24_vCopyrightOG_KST24_vCustomers are advised to consult with Circuit Design sales representatives before ordering.Circuitreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perCopyrightAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theequipment.Do not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.OG_KST24_vCustomers are advised to consult with Circuit Design sales representatives before ordering.Circuitreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perCopyrightAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theequipment.Do not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.OG_KST24_vCustomers are advised to consult with Circuit Design sales representatives before ordering.Circuitreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perCopyrightAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theequipment.Do not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.OG_KST24_vCustomers are advised to consult with Circuit Design sales representatives before ordering.CircuitDesign believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perCopyrightAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theequipment.Do not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.OG_KST24_v10eCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theequipment.Do not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.10eCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, perAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or iThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromthe operation, performance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject todirect sunlight, or in locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radioDo not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not drop the radiomodule or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toagents or corrosive gas.Do not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not take apart or modify theDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.equipment.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.equipment.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentplaced well away from metallic objects.The GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.equipment.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orequipment and other secondary damage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consCautionsDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationswith a significant increase in temperature.)Do not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Warningsequipment.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully indamages resulting from any improper use.As the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consCautionsDo not use the equipment within the vicinity of devices that may malfunction as a result ofelectronic radio waves from the radio module.Communication performance will be affected by the surrounding environment, sotests should be carried out before actual use.Ensure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsDo not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.WarningsDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.13Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safetythe risk of the customer and the customer must fully inAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consCautionsDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsDo not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.WarningsDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.13Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.Any use of Circuit Design products in such safety-critical applications is understood to be fully atthe risk of the customer and the customer must fully inAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consCautionsDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsDo not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.WarningsDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atthe risk of the customer and the customer must fully indemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consCautionsDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenthe '+' side of the power supply terminal and the case.When batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsDo not use the equipment in locations where it is likely toDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.WarningsDo not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject ton locations with extremely high humidity.The radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsDo not use the equipment in locations where it is likely tobe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Important noticeCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using amodule from which the label has been removed is prohibited.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using aCustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit Designreserves the right to make changes to this product without notice.Circuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consDo not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becopied or distributed in part or in whole without the prior written consent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating anddamage to the equipment. Remove the batteries when the equipmentis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.module or otherwise subject it to strong shocks.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatthe case GND and the circuit GND are connected to a large GND pattern.Do not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECustomers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, soEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofCommunication performance will be affected by the surrounding environment, socommunicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofcommunicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orwater. Do not use the equipment if water or other foreign matter has entered the case.Do not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method oThe manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromformance and reliability of equipment connected to the radio module.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofcommunicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.Ensure that the power supply has been switched off before attempting any wiring work.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orDo not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Customers are advised to consult with Circuit Design sales representatives before ordering.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atdemnify Circuit Design, Inc for anyAs the radio module communicates using electronic radio waves, there are cases wheretransmission will be temporarily cut off due to the surrounding environment and method of usage.The manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.Do not use the equipment within the vicinity of devices that may malfunction as a result ofcommunicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andpressure. Failure to observe this caution may result in the outbreak of fire, overheating andis not to be used for a longperiod of time. Failure to observe this caution may result in battery leaks and damage to theDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orDo not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have agreat effect on communication performance. As far as possible, ensure that the equipmentisThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Design believes the provided information is accurate and reliable. However, Circuit DesignCircuit Design products are neither designed nor intended for use in life support applicationswhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atf usage.The manufacturer is exempt from all responsibility relating to resulting harm to personnel orThe manufacturer is exempt from all responsibility relating to secondary damage resulting fromAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beent of Circuit Design, Inc.communicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andreverse connections may result in overheating and damage and must be avoided at all costs.The case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andis not to be used for a longDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orDo not subject the equipment to condensation (including moving it from cold locations to locationsbe affected by acid, alkalis, organicDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have aisThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Design believes the provided information is accurate and reliable. However, Circuit Designwhere malfunction can reasonably be expected to result in significant personal injury to the user.critical applications is understood to be fully atf usage.The manufacturer is exempt from all responsibility relating to secondary damage resulting fromAll rights in this operation guide are owned by Circuit Design, Inc. No part of this document may becommunicationEnsure that the power supply for the radio module is within the specified rating. Short circuits andThe case is connected to the GND terminal of the internal circuit, so do not make contact betweenWhen batteries are used as the power source, avoid short circuits, recharging, dismantling, andis not to be used for a longDo not use this equipment in vehicles with the windows closed, in locations where it is subject toThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orDo not subject the equipment to condensation (including moving it from cold locations to locationsDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have aThe GND for the radio module will also affect communication performance. If possible, ensure thatDo not remove the product label (the label attached to the upper surface of the module.) Using aOPERATION GUIDECircuit Design, Inc.Design believes the provided information is accurate and reliable. However, Circuit Designf usage.All rights in this operation guide are owned by Circuit Design, Inc. No part of this document may beThe case is connected to the GND terminal of the internal circuit, so do not make contact betweenThe radio module is neither waterproof nor splash proof. Ensure that it is not splashed with soot orDo not bend or break the antenna. Metallic objects placed in the vicinity of the antenna will have aThe GND for the radio module will also affect communication performance. If possible, ensure that
OG_KST24_vRevision HistoryOG_KST24_vRevision HistoryVersionOG_KST24_vRevision HistoryVersionOG_KST24_vRevision HistoryVersionOG_KST24_vRevision HistoryOG_KST24_v10eRevision HistoryDate10eRevision HistoryDateRevision HistoryRevision HistoryRevision HistoryDescriptionRevision HistoryDescriptionDescriptionDescriptionDescription1414OPERATION GUIDEOPERATION GUIDEOPERATION GUIDEOPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.RemarkOPERATION GUIDECircuit Design, Inc.RemarkOPERATION GUIDECircuit Design, Inc.RemarkOPERATION GUIDECircuit Design, Inc.RemarkOPERATION GUIDECircuit Design, Inc.OPERATION GUIDECircuit Design, Inc.

Navigation menu