Chiayo Electronics Co SQ-1016 Wireless Microphone User Manual

Chiayo Electronics Co Ltd Wireless Microphone Users Manual

Users Manual

Personal Wireless Portable AmplerOperation ManualCHIAYOIC:3563A-COACH400FCC ID:CINSQ-1016FCC ID:CINSM-1016
-1-● Coach 400 operating instructionCongratulation and thank you for the purchase of this all-in-one ultra compact portable sound system. To ensure a trouble-free operation, please read this manual thoroughly to fully understand its controls and functions.The main features of Coach 400 are as below:◎ High e󺩷ciency output power with inbuilt 25W class-D power ampli󺦳er. ◎ Truly wireless! Battery operation eliminates all cables so you can take it anywhere. ◎ 4” full range speaker system with maximum output of 40W ◎ USB 2.0 port for reading MP3 󺦳les with LCD display of track information ◎ Band selection of wireless microphone system：UHF (16 CH. switchable) or UHF/ VHF (󺦳xed frequency) ◎ Input：Wired microphone, Aux In, USB 2.0 ◎ Output：Aux Out ◎ 2 alarm sounds for emergency broadcasting ◎ Lithium battery o󺦲ers extended operation time and minimizes the weight and size ◎Φ 3.5mm stereo Aux In/Aux Out connectors ◎ Can be worn over the shoulder or mounted on ST-30 tripod stand. ◎ Suitable for outdoor/indoor applications such as lectures, trade fairs, tours and election events etc.Coach 400 can be equipped with 1 wireless receiver module. This receiver module can be either VHF or UHF. The VHF module is a 󺦳xed crystal single frequency type whereas the UHF module is a PLL synthesized type with 16 preset frequencies (identi󺦳ed by external 16 channel rotary switch(s)) or 󺦳xed crystal single frequency.● Con󺦳guration:All versions of Coach 400 series comes equipped with the following:1. Mini wired microphone (DM-556)2. Shoulder strap3. Switch mode power supply4. Operation manual● Optional accessories:1. Wireless handheld or beltpack transmitter2. Charger for UHF transmitter3. Tripod stand (ST-30)4. Storage bag (SB-41)5. Waist pocket (DC-20)● Matching transmitterband handheld transmitter beltpack transmitterUHF SQ-1016(16 freq.) Q-815(󺦳xed freq.)SM-1016(16 freq.) M-815(󺦳xed freq.)VHF Q-1005 M-1005Remark: Manufacturer reserves the rights to change the above combinations without prior notice.
-2-Coach 400 Rear control panel● Parts and function1. Power and volume control of wireless microphone2. Channel selector3. RF signal indicator4. USB port5. LCD display6. Play ／ Pause7. Skip forward8. Folder forward9. Play mode: Short press to switch between "repeat all", "repeat single" and "play random". Press for 1-2 seconds to change "EQ" modes.10. Skip backward11. Folder backward12. Emergency alarm(2 sounds for selection)13. Tone control14. Volume control of audio input/USB15. Power/Battery low indicator: Normal(GREEN)/battery low(RED)16. Volume control of wired microphone17. Charging indicator: During charging(RED)/Charging 󺦳nished(GREEN)18. DC in19. Aux output20. Aux input21. Wired microphone input1234 5678910 1112 13 14 15 1619 20 2117 18
-3-● Recharge its inbuilt Lithium battery before 󺦳rst useAfter unpacking the unit for the 󺦳rst time, please charge the unit for about 4~5 hours before any operation. This is absolutely necessary as the built-in rechargeable battery might have been discharged naturally due to long shipment and storage time, even though it has been fully charged in the factory prior to shipment.To charge the battery, just plug in the DC end of the switch mode power supply into the DC IN of the unit and charging will start automatically. During the charging process, the charging indicator LED will be RED. When this LED turns GREEN, this battery is then fully charged.● Operating proceduresTo operate this portable sound unit, switch on the main POWER switch, which will be GREEN. If it turns RED, its battery power might be too low and recharging is necessary. The main power switch does not switch on the wireless microphone and USB digital player as each of them has dedicated Power / Volume control.● Operating the built-in wireless microphone systemTo use the wireless microphone, 󺦳rst switch on the main power switch, then switch on the WR power/volume control switch. Switch on the corresponding transmitter and set this system to the same frequency and RF signal LED will grow.● Operating the dynamic wired microphoneThere is a MIC IN jack with dedicated volume control for this portable sound unit. To use a cable microphone (dynamic only), just plug the end with a phone jack plug into MIC IN . Switch on the Power / volume control knob MIC and rotate it to adjust the volume.● Operating the USB Digital PlayerTo use the wireless microphone, 󺦳rst switch on the main power switch, then switch on the AUX/USB power/volume control switchand rotate it to adjust the volume. Plug USB into the port and begin your misic playing and setting.How to use each buttons of this digital player:▲II: Press to play/pause the music.▲: Press to skip forward.▲: Press to skip backward.▲▲: Press to skip folders forward.▲▲: Press to skip folders backward.MODE: Short press to switch between "repeat all", "repeat single" and "play random". Press for 1-2 seconds to change "EQ" modes.
-4-UHF handheld microphone Q-815● Parts and functions1. Microphone module and ballscreen2. Power/Battery low indicator3. Power switch4. Battery cover● Battery installationQ-815 microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period.1 2 3 4UHF handheld microphone SQ-1016● Parts and functions1. Microphone module and ballscreen2. Power/Battery low indicator3. Power switch4. Channel selector5. Battery cover6. charging port● Battery installationSQ-1016 microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period.● Channel settingUse the attached small screw driver to set the channel and the channel number will show on the window above it.1 2 3 4 56
-5-UHF beltpack transmitter SM-1016● Parts and functions1. Antenna2. Power/Battery low indicator3. Power switch4. Mini XLR connector5. Release buttons of battery compartment6. Battery cover7. Lavalier microphone8. Charging contacts9. Channel selector10. Gain control (GT, hign impedance)11. Gain control (MT, low impedance)● Battery installationSM-1016 microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period.● Channel and sensitivity settingUse the attached small screw driver to set the channel and the channel number will show on the window above it.Gain control is an adjustable design that enables user to set di󺦲erent output levels. GT is for the use of instrument with high impedance, such as guitar while MT is for the use of low impedance such as lavalier or headset microphone. To adjust the audio input levels, simply use a small screw driver to rotate to a desired level.12 3 4567 8910 11VHF handheld microphone Q-1005● Parts and functions1. Microphone module and ballscreen2. Power/Battery low indicator3. Power switch4. Battery cover● Battery installationQ-1005 microphone requires 2 AA-size batteries to operate. Please insert the battery according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the battery if it's not to be used for a longer period.1 2 3 4
-6-UHF beltpack transmitter M-815VHF beltpack transmitter M-1005● Parts and functions1. Antenna2. Power/Battery low indicator3. Power switch4. Mini XLR connector5. Release buttons of battery compartment6. Battery cover7. Lavalier microphone8. Charging contacts9. Gain control (GT, hign impedance)10. Gain control (MT, low impedance)● Battery installationM-815/M-1005 microphone requires 2 AA-size batteries to operate. Please insert the batteries according to the correct polarity. Many batteries are known to have leakage problem of conductive and corrosive liquid. Please observe the rule to remove the batteries if they are not to be used for a longer period.● Sensitivity settingGain control is an adjustable design that enables user to set di󺦲erent output levels. GT is for the use of instrument with high impedance, such as guitar while MT is for the use of low impedance such as lavalier or headset microphone. To adjust the audio input levels, simply use a small screw driver to rotate to a desired level.12 3 45678910
12I1220FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.To assure continued compliance, any changes or modi󺦳cations not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).IC ID CautionThis device complies with Industry Canada licence-exempt RSS-123 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.THIS DEVICE COMPLIES WITH PART 74 OF THE FCC RULES. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.

Navigation menu