Chiayo Electronics Co Q-1002 Wireless microphone transmitter User Manual rev01

Chiayo Electronics Co Ltd Wireless microphone transmitter rev01

user manual rev01

HAND-HELD Microphone (Q-1002)Handheld MicrophoneParts and FunctionsBattery statusLED indicatorIBattery compartmentcoverFig.1Metal Grille( Capsule module inside)Power SwitchBattery InstallationQ-802 uses 1 piece of 9V battery. To install new or replace the old battery, First unscrew the battery capfrom the battery compartment, then insert the new battery according toits correct polarity as indicated. For longerOperation hour, Alkaline batteryis recommended! ~Fig.2III After putting the battery cover back to the housing, slides the switch to "ON"position as shown in Fig. 3.Fig.3As soon as the switch is on, the battery-status indicator will give a flash, indicatinga normal operation. If there is no flash, it indicates either power supply is notavailable or battery is installed wrongly.III After switching on, the RF signal indicator LED(s) of matching receiver will light up,indicating the microphone signal transmission is in normal operation.Switch off the power switch when the microphone is not in use, meanwhile, removethe battery out of microphone if it is not in use for an extended period.

Navigation menu