Chiayo Electronics Co AL30 AEROLINK User Manual

Chiayo Electronics Co Ltd AEROLINK Users Manual

Users Manual

Operating ManualAL 3.0
AUX OUTDC IN12VLINE OUT13 2654 7AL 3.0 Aerolink Bluetooth® Receiver Thank you for purchasing the Aerolink by Fitness Audio. This product is easy to install by anyone one who is familiar with setting up sound systems.1. Powering It Up.The Aerolink can be powered from any 12V500mA already in use in the audio system like those that power the Wireless Mic Receiver using the DC “Y” Cable supplied. Alternatively, if you purchased the unit with an optional 12V DC Power Supply then please plug that into a GPO and DC connector into the Power In socket (1).2. Connecting to a Mixer.Connect using either the Stereo (TRS) Line Out Jack (3) or the 2 RCA sockets(2) to your mix-er’s matching Line Input sockets. A standard 2RCA to 2RCA Cable is provided.3. Turn it on and linking up.When you turn it on, the blue Power-on light in the switch illuminates and the 2 blue LEDs will start flashing once you have pushed the Blue LINK button (6). The first, “SCAN” LED(4) is searching for a smartphone or player to pair with, so, open your smartphone, go to Settings, select Bluetooth, turn Bluetooth on and watch it search for devices. After a few seconds the words Aerolink will appear and Not Connected will change to Connected and the SCANLED will stop flashing. The second, “LOCK LED(5) will go solid confirming the link is good. Goto your music file on the device and select the Playlist you want to use and press Play. If thesound system is turned on and the Aerolink has been selected then you will hear the musicso set the volume and you are up and running with Aerolink. Please note that the VolumeControl (7) on the front Panel of the Aerolink is a “Turn Down” one so should always be onMAX unless a better cleaner sound with the Mixer or Amp input you are using is achievedwith it set at the 12 o’clock position.4. Re-setting the LinkOnce you take the linked device out of the range of the receiver (around 8 meters or 25 feet) you will need to re-scan and connect again. Press the Blue Button to break a link and to start a new linking process again.Key To Illustration:1. DC Input2. RCA Outputs3. ¼” Stereo Jack Output4. SCAN LED5. LOCK LED6. LINK button7. Volume Control
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Fitness Audio products are distributed worldwide by Fitness Audio Network. They are manufacturing defects by a 12 month warranty commencing at the date of purchase. __________Warranty information for service claims.(Please retain for your records.) This product was purchased by:(Business Name) ............................................... .............................on (date) . . / . . / . . from (Supplier) .............................. .............................of (address) .................................................... .............................Serial Number.................................................. .............................Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:. Reorient or relocate the receiving antenna.. Increase the separation between the equipment and receiver.. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).FCC Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.WARNINGDo not remove lidsNo user serviceable parts insideDo not place liquid containers on unitDo not expose to moisture or rainFitness Audio Network P/LPO Box 321Alexandria NSW 1435AUSTRALIAwww.fitnessaudio.net.au
12I2231

Navigation menu