Cheng Uei Precision Industry HS5CN Bluetooth Headset User Manual

Cheng Uei Precision Industry Co., Ltd. Bluetooth Headset

Users Manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2006.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-888-390-6456 (TTY/TDD United States for hearing impaired)Guide Number: 6809504A24-OmotorolaBluetooth®Handsfree HeadsetGet connected in 4 quick steps.H550VolumeButtonsCall Button/Slide Switch Multi-ColorIndicator LightMicrophoneSpeaker(on reverseside)Charging PortTROUBLESHOOTINGBefore using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.Take a moment before you get started to familiarize yourself with your newH550 Headset.BEFORE YOU BEGIN1CHARGE Your Headset's BatteryPlug the Motorola charger into the end of the headset.The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns off.Disconnect the charger.12Note: Headset is not functional while charging.2START BLUETOOTH FEATUREYour PhonePress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.12345Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.For most Motorola phones (at the main menu):3PAIRYour HeadsetBefore you can use your headset, you must pair (link) it with your phone.Step A - PUT THE HEADSET IN PAIRING MODEThe headset indicator light will be steadily lit in blue when in pairing mode. To place the headset in pairing mode, simply slide the switch toward the microphone (ON position). After a few moments, the indicator light becomes steadily lit in blue.Note: If the headset has previously been paired with other devices, you need to turn those devices off before sliding the switch to the ON position. If you already slid the switch to the ON position, toggle the switch OFF and ON (after ensuring devices are turned off) to enter pairing mode.If the headset does not enter pairing mode, see TROUBLESHOOTING for help.3PAIR CONTINUEDYour PhoneStep B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET34512For most Motorola phones:On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola H550.Select OK or Ye s to pair your headset with your phone.Enter the passkey: 0000Select OK.When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing blue.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.4TEST AND USEYour phone and headset are now paired and ready to make and receive calls. To make a call: Place the headset over your ear.On the phone, dial the number you want to call and press SEND key on your phone.If your phone and headset are successfully paired, you will hear ringing on the headset.After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.To save battery power, turn OFF the headset when you don't use it for an extended time by sliding the switch towards the charging plug.123USING YOUR H550SeeFeatures and Functions Guideon the reverse side for information onusing your H550My headset will not enter pairing mode.Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, turn off the other device and wait for 10 seconds. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode.My phone doesn't find my headset.Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).My headset worked before but now it's not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).Support.If you need more help, contact us at 1-877-MOTOBLU or visit us at www.hellomoto.com/BluetoothsupportFTTDRAFBLESHhelp.2nu) > Connection > Bluetooth LiHandsfree > Look for Devices. The phone lists Bluetooth devices it fSelect MSelect OKr your headsyour phoneEnter the passkey: 0000Select OK and ake and reTo make a call: Place the headset over ythe phone, dial the number you want to call and press SEND key on your phone.If your phone and headset are successfupaired, you will hear ringing oAfte123UR H550and uideon the reverse side for information onusing your H550AAMy headset will not enter pMake sure that any devices pre turned oue turDDRAFTDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDonnected in 4 quick steps.onnected in 4 quick steps.RRDRDRRRRRRRphoneRRPortthe Motorola charger intheadset.e indicator light turns red when theattery is charging. It may take up to 1 minute for the indicator light to turn on. When th(about 2ThonePress (Menunection > Blueto123s Bluetooth feature is off by deTo use your headset, you must turn on the Bluetooth featureMotorola phones (at the main menu
IMPORTANT:Be sure to first follow theQuick Start Guideon the reverse side of this guideto complete initial setup of your H550.Features and Functions GuideH550Bluetooth®Handsfree HeadsetTURNING HEADSETON AND OFFTo turn your headset on, slide the switch toward the microphone. The indicator light flashes blue (if paired with another device), or is steadily blue (if ready to be paired).To turn your headset off, slide the switch toward the charging plug. The indicator light will turn off.EARHOOKS AND YOUR HEADSETYour H550 headset is supplied with three earhooks. The earhook is attached onto a hinge pin, and is placed onto your ear when using your headset. To install an earhook on your headset: 040059o2 Pull Earhook UpHinge Pin1 Open EarhookCHANGING VOLUME BUTTON ORIENTATIONYou can also change the orientation of the volume buttons on your headset. Turn the headset power off.Press the Volume button you want to assign as the "volume up" button and slide the switch toward the microphone. The indicator light is either steadily lit or flashing in blue. 12• The essential requirements and other relevant provisions of Directive 1999/5/EC.• All other relevant EU Directives.European Union Directives Conformance Statement0168ProductApprovalNumberThe above gives an example of a typical Product Approval Number.You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product’s label in the “Search” bar on the web site.Hereby, Motorola declares that this product is in compliance with:MAKING CALLSNote: Your H550 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Function ActionMake a voice dial call Tap the Call button and speak the name after the toneEnd a call Tap the Call buttonReceive a call Tap the Call buttonReject a call Tap a Volume buttonRedial last call Press and hold the Call button until you hear a beepAnswer a second Tap the Call button incoming callReject a second Tap a Volume buttonincoming call MAKING CALLS CONTINUED Function ActionEnd an active call and Tap a Volume buttonresume a call on holdMute or unmute a call Tap both Volume buttonsDisable the First slide the switchindicator light toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on)Note: Some features are phone/network dependent.INDICATOR LIGHTSWith the Charger Plugged InHeadset Indicator Headset StatusSteady blue ChargingOff Charging completeWith No Charger Plugged InHeadset Indicator Headset StatusOff Power offSteady blue Pairing mode10 rapid blue/purple Pairing successfulflashesSlow blue pulse Connected (on a call)Slow blue flash Standby (not on call)Blue flash Idle (not connected)Quick blue flash Incoming/outgoing callSlow purple pulse Connected (on a muted call)Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.AUDIO TONESAudio Tone Headset StatusSingle high tone when Volume at minimumpressing volume button or maximumTwo tones Low batteryrepeated every 30 sec.No audio indications; Out of rangedeteriorating qualityRing tone Incoming callSingle high tone Pairing confirmationLow to high tone Voice activationSingle high tone End callLow to high tone Phone network not availableTwo ascending tones Mute enabledTwo descending tones Mute disabledSlide SwitchIndicator LightSlideSwitchVolumeButtonsOpen the attached earhook 90 degrees from the headset.Gently lift and pull thetop of the earhook upand off the upper hingepin. Then, pull it away to remove it.Position the headset for right or left ear use (right ear use is displayed).Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.1234WEARING THE HEADSETOnce you have attached your desired earhook, follow these steps to wear your headset on your ear:123Open the attached earhook 45 degrees from the headset.Loop the earhook over your ear.Press earhook to your ear.When worn, your headset will look like this on your head:123
FCC Caution1. The device complies with Part 15 of the FCC rules. Operation is subject tothe following two conditions:(1)This device may not cause harmful interference.(2)This device must accept any interference received, including interference that may cause undesired operation.2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.3. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment.
FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Navigation menu