Charm Winner Co RF-204PU24 Gamepad User Manual

Charm Winner Co Ltd Gamepad

User Manual

                RF-2.4G Gamepad User’s Manual         Introduction                                                    Thank you for choosing this innovative RF Gamepad. This gamepad not only can be   compatible with both PC and PS, but also be equipped with a high 2.4G RF technology. To satisfy users this gamepad is expanded the Macro and Turbo function, users, can perfectly enjoy the convenience and exciting playing with this gamepad.        Package Contents   Gamepad   *1   Receiver   *1   USB Cable    *1   CD Driver      *1   User Manual    *1  System Requirement  PC 1. IBM PC 586/PentiumII compatibles or higher 2. Available USB port or extension USB hub 3. CD-ROM drive 4. Microsoft Windows XP/ME/2000/98 recommended   PlayStation  1. PlayStation 2 / PSOne / PlayStation RF-2.4G  PC Combo PS2 Gamepad Hardware Overview   Receiver   1. 1 Connection Button 2. 2 LED Indicator (One is connection indicator and another is low-battery indicator.) 3. 1 USB Connector for PC    Gamepad  PC   PlayStation Eight ways D-Pad  Eight ways D-Pad Button 1, 2, 3, 4  Χ,○,□,△ Button 5, 6, 7, 8, 11, 12  L1, L2, L3, R1, R2, R3 Button 9, 10  Select, Start Analog Ministick Analog/Digital switching button Program (Macro/Turbo) button Vibration/Connection button Red/Green/Orange LED indicator Connection LEDLow-Battery LEDConnection Button USB Connector D-Pad Right stick & button12/R3 Left stick & button11/L3Mode-LEDButton1 /Χ Button3 /□   Button2 /○Button4 /△Button6, 8 / R1, R2 Button5, 7 / L1, L2A/D  Macro/Turbo Button10/Start Vibration/Connection Button9/Select Operation Reference1. Gamepad Calibration Before using this gamepad, please rotate the sticks once to calibrate perfectly. 2.  Connect Gamepad with Receiver Please follow below steps to connect the gamepad with the receiver. 1) Press and hold the Connection/Vibration button of the gamepad until the Mode- LED twinkles with orange color. 2) Press the button of the receiver to connect with each other.    > LE D indicator: Condition  Online  Off line  Connecting Connection -LED  ON OFF  Twinkle & Orange  3.  Analog/ Digital S witching This gamepad is equipped with Digital and Analog modes. And there are some different features with PC and PlayStation modes in A/D modes as followings: > PC   Gamepad  Analog  Digital D-pad  POV HAT  X&Y Axis motion Left Mini-stick  X&Y Axis motion  POV HAT Right Mini-stick  Throttle& Rudder  Throttle& Rudder Button 11, 12  Normal function  No function Other Buttons  Normal function  Normal function Mode-LED Indicator Red  Green  > PlayStation You can switch between digital and analog modes. The Mode-LED turns ON with red color in Analog mode and with green color in Digital mode. When the gamepad is in Analog mode, the following buttons and sticks may operate in Analog fashion depending on the features supported by the software title. Refer to the software manual for details. PlayStation2 format software D-Pad /  Χ,○,□,△  / 2 ministicks / L1, L2, R1, R2 PlayStation format software 2 ministicks 4. Vibration Function  You can switch the vibration function ON or OFF by pressing the Vibration Connection button.     >LE D indicator:   Vibration ON   Vibration OFF  Mode-LED   Twinkle ON  5. Macro function There are four buttons (L2, L3, R2, R3) allowed being set as the macro buttons. Please follow below steps to set up the macro function. 1) Press the Program button to set up the macro function. 2) Press one of four buttons (L2, L3, R2, R3) which you want to set as a macro button. 3) Press the buttons (D-Pad,  △,Χ,□,○, L1, R1, L2, R2, L3, R3, Start) in turn to set into the Macro function. 4) Press the Program button again to finish the Macro function setup. > L ED indicator Steps of the Macro set Step 1)  Step 2)  Step 3)  Step 4) Mode-LED   Orange  Twinkle & Orange  OFF. Connection-LED OFF. OFF  ON  6. Turbo function Please follow below steps to set up the Turbo function.    1) Press the Program button.    2) Press the buttons (△,Χ,□,○, L1, R1, Start) which you want to set with the Turbo function. Note: If you want to remove the Turbo function, please repeat the above steps.    > L ED indicator Steps of the Turbo set  Step 1)  Step 2) Mode-LED   Orange   OFF Connection-LED   OFF ON
Federal Communications Commission (FCC) Statement   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.   These limits are designed to provide reasonable protection against harmful interference in a residential installation.   This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.   However, there is no guarantee that interference will not occur in a particular installation.   If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:   - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help.   Warning: As shieded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception.   It is essential that only the supplied power cord be used.   Use only shieded cables to connect I/O devices to this equipment.   You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Immersion Patent   “Protected by one or more patents of Immersion Corporation.    A list of applicable patents can be found on Immersion’s website at        www.immersion.com.”   All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies. For more information or any services are required, please visit us through the Internet link   Website:  http://www.rockfire.com.tw     e-mail:   service@r ockfire.com.tw 7.  LED Indicator  while operating The Mode-LED indicates as the following table when you press any button: Mode  Analog  Digital The condition of the button Original button    M acro/Turbo  Original button    Macro/Tur bo Pressing R ed  Orange  Green  Orange Release  Red then OFF  Red then OFF Green then OFF  Green then OFFNote: If your gamepad is in Vibration mode, the Mode-LED twinkles when indicating.  8.  Low-battery LED of  the receiver When the Low-battery LED turns ON, please change new batteries.   Note:  The vibration function will be turned OFF automatically when this Low-battery LED ON.  9.  Sleep &  Wake Up   When you stop operating this gamepad for some time (take a look at the below table), it is become to a “sleeping” mode to prevent consuming the battery. And you can wake up it by press one of the key-buttons as: Vibration/Connection, A/D, Macro/Turbo, Select, Start. Condition  Online  Offline  Function SettingTime for coming sleeping 2 Min  15 Sec  1 Min  Installation Only for PCAlways install the software first, then the hardware subsequently. A. Software Installation This RF-2.4G gamepad is the software needed for your device setup, however, if you don’t choose to install it, it is still operated without vibration function. 1.  Insert the CD of this gamepad into your CD-ROM; wait for a few seconds for your computer to load the disc.  2.  If your system is setup to automatically read a new inserted CD, then the auto run program is executed and the opening screen for installation appears. Please follow the on-screen instruction to install this gamepad step-by-step.    3.  If your system doesn’t launch the installation software automatically, please find the auto execute file “Install bat”, which is located under the directory of your CD drive and click on it, then follow the on-screen instruction to install this gamepad.    Install Shield Wizard information: The system is ready to install, and click “Next ”.   The copyright declares: Select “Agree” and click “Next”.   User’s information: Key in “User’s name and Company”. If your system is Window 2000/Xp, select an appropriate use limit.   Confirm to start install: Press “Install”.     Finish the install: Press “Finish”.  The i nstalled procedures administer as follows: 4.  Upon completing software installation, restart your PC as the installation screen requested. B. Hard ware Installation 1.  Plug the Mini-USB connect of the cable to the port on the receiver and another USB connect to the USB port on your computer.   2.  After connected the monitor will show “Find a new hardware” and the standard USB driver will be located for you to finish the easy installation and play games immediately. 3.  The system will add an item of this gamepad in the game-controller board automatically, and you can test the function of gamepad. Importance & Attention                                          1.  When this gamepad is used in PC, please ensure the Joystick ID of it “Joystick 1”, if the USB port of this receiver is properly plugged but no any work.    2.  The functions of all buttons may vary in different games. Before start game setting, always read your game manual carefully to approach the best game setting.  3.  Please use the same brand of batteries to ensure there is a better efficiency. >>>>>   MODEL: RF-2.4G GamepadGamepad Rating:DC 6.5V/100mA  650mWReceiver USB mode Rating:  DC 5V/60mA  300mW                PS2 mode Rating:  DC 3.5V/40mA  140mW                                               DC 8V/30mA  240mW Safety information"This device complies with Part 15 of the FCC Rules.Operation is subject tothe following two conditions: (1) this device may not causeharmfulinterference, and (2) this device must accept any interferencereceived,including interference that may cause undesired operation"

Navigation menu