Chaney Instrument RF100VTXRA1 Wireless Thermometer User Manual

Chaney Instrument Co. Wireless Thermometer

User manual

Instruction ManualSAVE THIS MANUAL FOR FUTURE REFERENCE.Questions? Contact Customer Support at (877) 221-1252 or visit www.AcuRite.com.CONTENTSUnpacking Instructions ........... 2Package Contents .................. 2Product Registration ............... 2Features & Benets: Sensor ..... 2Features & Benets: Display .... 3Setup .................................... 6Sensor Setup ......................... 6Display Setup ........................ 7Intelli-Time Clock .................... 8Set the Time, Date & Units ...... 8 Backlight Settings ................... 8Placement Guidelines ............. 9Using the Weather Station .....10Troubleshooting ....................11Care & Maintenance ............. 13Replace Intelli-Time Battery ....13Specications ........................14FCC Information ...................14Customer Support .................15Warranty..............................15Weather Station model 02048/ 00592TXRA1
2 3Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.Unpacking InstructionsRemove the protective lm that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove. Package Contents1. Display unit with tabletop stand2. Power adapter3. Outdoor sensor 4. Instruction ManualPRODUCT REGISTRATIONRegister online to receive 1 year warranty protectionwww.AcuRite.comIMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE►Register a ProductFeatures & Benets43215OUTDOOR SENSOR1. Integrated Hanger For easy placement.2. Wireless Signal Indicator Flashes when data is being sent to the display unit.3. Battery Compartment4. A-B-C Switch ID code that must match display’s A-B-C switch to ensure units synchronize.5. Battery Compartment Cover67118109Features & BenetsBACK OF DISPLAY UNIT6. Integrated Hang Hole for easy wall mounting.7. Reset Full reset to factory defaults.8. A-B-C Switch ID code that must match tower sensor’s A-B-C switch to ensure units synchronize.9. Battery Compartment10. “LIGHT” Switch Controls the display’s backlight and brightness: Off, Low, Medium, High11. Plug-in for Power Adapter12. Battery Compartment Cover131614 15FRONT OF DISPLAY UNIT13. “ “ Button for setup preferences. 14. “ “ Button for setup preferences.15. “ “ Button for setup preferences.16. Momentary Backlight Button Lights display for 7 seconds (only applicable while on battery power).12
4 5Features & Benets12345 6 78109111213141516DISPLAY UNIT FRONT1. Current Outdoor Temperature Arrow icon indicates direction temperature is trending.2. 12 to 24 Hour Weather Forecast Self-Calibrating Forecasting pulls data from the outdoor sensor to generate your personal forecast.3. Current Indoor Temperature Arrow icon indicates direction temperature is trending.4. Moon Phase5. Display Low Battery Indicator 6. Intelli-Time® Clock Automatically updates for Daylight Saving Time.7. Date8. Current Indoor Humidity Arrow icon indicates direction humidity is trending. 9. Humidity Level Indicator Indicates a high or low indoor humidity level. 10. Learning Mode Icon Disappears after weather forecast self-calibration is complete.11. Barometric Pressure Arrow icon indicates direction pressure is trending.12. Current Outdoor Humidity Arrow icon indicates direction humidity is trending.13. Heat Index Displays Heat Index calculation when temperature is 80°F (27°C) or above.14. Sensor Low Battery Indicator15. Outdoor Sensor Signal Strength16. Dew Point Displays Dew Point calculation when temperature is 79°F (26°C) or below.
6 7PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.Display Unit SetupSet the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize. Plug in Power AdapterFor the best performance, plug in the power adapter as the main power source for this product.Install or Replace Backup Batteries (optional)1. Remove the battery compartment cover. 2. Insert 3 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment. 3. Replace the battery cover.312A B C1A-B-C Switch set to match sensor3Install Backup Batteries 3 AA batteries (optional)2Plug in Power AdapterIMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. Power adapter is recommended as the primary power source to enjoy the full functionality of this product.SETUPSet the A-B-C SwitchThe A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Install or Replace BatteriesAcuRite recommends high quality alkaline or lithium batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended.The sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4ºF / -20ºC.1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside the battery compartment.2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.3. Replace the battery cover.Sensor Setup211A-B-C Switch set to match display unit2Install Batteries 2 AA batteriesA B C
8 9Placement for Maximum AccuracyAcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.Display Unit PlacementPlace the display unit in a dry area free of dirt and dust. Display unit stands upright for tabletop use or is wall-mountable.Outdoor Sensor PlacementSensor must be placed outside to observe outdoor conditions. Sensor is water resistant and is designed for general outdoor use, however, to extend its life place the sensor in an area protected from direct weather elements.Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location, like a well covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air to circulate around the sensor. Important Placement Guidelines• To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents. • Display unit and outdoor sensor must be within 330 ft (100 m) of each other. • To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.• To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).Setup is CompleteThe sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.TV 3(100 meters)(330 feet maximum)(.9 m)ATLEASTAPARTIntelli-Time® ClockIntelli-Time products are pre-programmed with the correct time and date. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically update for Daylight Saving Time.Set the Time, Date & UnitsPress and HOLD the “ ” button to enter SETUP MODE. Once in setup mode, the preference you are currently setting will blink on the display.To adjust the currently selected (ashing) item, press and release the “T” or “V“ buttons (press and HOLD to fast adjust).To save your adjustments, press and release the “ ” button again to adjust the next preference. The preference set order is as follows:TIME ZONE ( PST MST CST EST AST HAST AKST) DST* (Daylight Saving Time ON or OFF) CLOCK HOUR CLOCK MINUTE CALENDAR DATE CALENDAR MONTH CALENDAR YEAR TEMPERATURE SCALE (ºF or ºC) BAROMETRIC PRESSURE SCALE (inHg or hPa)*If you live in an area that observes daylight saving time, DST should be set to ON, even if it is not currently Daylight Savings Time.You will automatically exit SETUP MODE if no buttons are pressed for 20 seconds. Enter setup mode at any time by pressing the “ ” button.Backlight SettingsThis weather station’s color display features a backlight with brightness levels including High, Medium and Low brightness settings.Using battery power alone, the backlight is available momentarily for 7 seconds by pressing the “BACKLIGHT” button, located on top of the display.When display is powered with the power adapter, the display’s brightness can be adjusted using the “LIGHT” switch, located on the back of the display inside the battery compartment. The switch offers four different backlight settings: High (100%) brightness, Medium (60%) brightness, Low (30%) brightness and Off (0%), or no backlight.
10 11TroubleshootingProblem Possible SolutionNo outdoor sensorreceptionno barsIf the wireless signal indicator shows no bars:• Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other.• Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc). • Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced. Outdoor temperatureis ashing or showing dashesFlashing of the outdoor temperature is generally an indication of wireless interference. 1. Bring both the sensor and display unit indoors and remove batteries from each.2. Make sure the A-B-C switch on both units match.3. Reinstall batteries in the outdoor sensor. 4. Reinstall batteries in the display unit.5. Let the units sit within a couple feet of each other for about 20 minutes to gain a strong connection. Sometimes changing to a different channel can help. Inaccurate forecast• Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions.• Has Learning Mode icon disappeared from the display unit? Learning Mode must complete before forecast and pressure will be accurate.• Allow unit to run continuously for 33 days. Battery removal or resetting the display unit will restart Learning Mode. After 14 days, forecast should be fairly accurate, however Learning Mode calibrates for a total of 33 days.Inaccuratetemperature or humidity• Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 9).• Make sure both units are positioned away from moisture sources (see page 9). Using the Weather StationLearning ModeSelf-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction. Weather ForecastAcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy - personalized for your exact location.Barometric PressureSubtle variations in barometric pressure greatly impact the weather. This weather center displays the current pressure and indicates the direction the pressure is trending (FALLING, STEADY, or RISING).Humidity Level IndicatorThe Humidity Level Indicator easily conveys a low or high indoor humidity level for your home and health: Learn more at http://www.acurite.com/humidity-healthOPERATIONView the complete list of icons at www.AcuRite.com/acurite-iconsRAIN/SNOWMIX LIKELY(Lightning=Stormy)(windy)SNOWLIKELYLIGHT RAINLIKELYPARTLYCLOUDY SUNNYCLOUDY
12 13Care & MaintenanceDisplay Unit CareClean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.Outdoor Sensor CareClean with a soft damp cloth. Do not use caustic cleaners or abrasives.Replace Intelli-Time Clock BatteryIntelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the Intelli-Time battery:1. Locate the coin cell battery compartment door on the back of the display unit. Unscrew and remove the compartment cover.2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.3. Screw in the battery cover.If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.Troubleshooting - ContinuedProblem Possible SolutionDisplay screennot working• Check that the batteries are installed correctly. Batteries may need to be replaced.• Reset the display by pressing the reset button, located on the back of the display unit. Date and time will need to be entered after a reset.The unit lost power or batteries were changed and the time is not correct• The Intelli-Time battery needs to be replaced (see page 13). Once the new battery is installed, time and date will need to be set manually.
14 15At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benets.Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of tness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, rm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, rm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147Limited One Year WarrantyPRODUCT REGISTRATIONRegister online to receive 1 year warranty protectionwww.AcuRite.comIMPORTANT PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE►Register a ProductCustomer SupportAcuRite customer support is committed to providing you with best-in-class service. For assistance, please have the model number of this product available and contact us in any of the following ways:(877) 221-1252 info@chaney-inst.com24/7 support at www.AcuRite.com►Installation Videos ►Register your Product►Instruction Manuals ►Support User Forum►Replacement Parts ►Submit Feedback & IdeasTEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºCIndoor: 32ºF to 122ºF; 0ºC to 50ºCHUMIDITY RANGE Outdoor: 1% to 99% RHIndoor: 1% to 99% RHWIRELESS RANGE 330 ft / 100 m depending on home construction materialsOPERATING FREQUENCY 433.92 MHzPOWER Display: 5vdc power adapter 3 x AA alkaline batteries (optional)Sensor: 2 AA alkaline or lithium batteriesDATA REPORTING Outdoor: 16 second updates Indoor: 60 second updatesFCC InformationTThis device complies with part 15 of FCC rules. Operation is subject to the following two conditions:1- This device may NOT cause harmful interference, and2- This device must accept any interference received, including interference that may cause undesired operation.WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modifications could void the user authority to operate the equipment.This device complies with Industry Canada’s licence-exempt RSSs.Operation is subject to the following two contions:(1) This device may not cause interference, and(2) This device must accept any interference received, including interference that may cause undesired operation of the device.SpecicationsLe présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details.Printed in China02048 INST 092214It’s more than accurate, it’s AcuRite offers an extensive assortment of precision instruments, designed to provide you with information you can depend on to Plan your day with condence™.www.AcuRite.comWeather StationsTemperature & HumidityWeather Alert RadioKitchen Thermometers & TimersClocks

Navigation menu