Chaney Instrument 00991 Hixson Temp Tag User Manual

Chaney Instrument Co. Hixson Temp Tag

Users Manual

Chaney Instrument Co. Hong Kong Primex Asia Limited ShenZhen Representative office 香港普耐美亚洲有限公司深圳代表处 AB,29/F HAIYING BUILDING SOUTH CAITIAN ROAD FUTIAN DISTRICT SHENZHEN CHINA 深圳市福田區彩田南路海鷹大廈 29 樓AB 室 HHiixxssoonn TTeemmpp TTaagg Hixson Version 5.0 5st Nov 2005
Hixson Temp Tag (V5.00)- mmaannuuaall Copyright@2005 Chaney Instrument Co Inc. –All rights reserved 1 A．Foreword The user is cautioned that changes or modifications not expressly approved by Chaney Instruments Co. could void the user's authority to operate the equipment. 15.105: For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 15.19 (labeling not on EUT due to size must be in manual: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1. Definition list Sender: A wireless sending module. Receiver : A wireless receiving module which displays temperature. B．Functional Specification 1. Features: a. Temperature Range: 80`F-120`F b. The system included a receiver and a sender.
Hixson Temp Tag (V5.00)- mmaannuuaall Copyright@2005 Chaney Instrument Co Inc. –All rights reserved 2c. The system will transmit the temperature 4 times per hour. (Transmit time space: 15 minutes. They are circularly transmitted within one second) d. Temperature alarm function: A red LED and LCD will flash in the receiver when temperature range over 104`F and it will display “- - - “when the temperature range is outside 80- 120`F. 2. LCD display 1) The Sender without LCD. 2) The receiver with following LCD: 3. Operation a. When power on the receiver, its LCD will fully display as the below figure, then the LCD will display as next figure. b. The time code will be preset in the factory and exit factory by pair which is matched the time code. c. Customer can register the new time code by pressing the rest key on the back side of the receiver .(need to screw out the screw to access the reset key) The receiver will clear the old time code and keep it in learning mode to learn the new time code from a transmitter once the reset key is pressed. The learning process should be by placing a pair in a shielded box or by keeping the pair far away from any other sets in order to avoid any interference from any other pairs of receivers and transmitters. d. The learning process takes 15 minutes to learn the time code for the handshake. e. Transmitter sends the data every 15 minutes. f. The LCD of the receiver will display “-E-“ when the receiver cannot receive any signal for more than 8 consecutive times.
Hixson Temp Tag (V5.00)- mmaannuuaall Copyright@2005 Chaney Instrument Co Inc. –All rights reserved 3 5. Configuration (Industry Design)
Hixson Temp Tag (V5.00)- mmaannuuaall Copyright@2005 Chaney Instrument Co Inc. –All rights reserved 4

Navigation menu