Chainway Information Technology C72 Mobile Data Terminal User Manual Mobile Data Terminal

Shenzhen Chainway Information Technology Co., Ltd. Mobile Data Terminal Mobile Data Terminal

Users Manual

SHENZHEN CHAINWAY INFORMATION TECHNOLOGY CO.,LTD Mobile Data Terminal C72 User Manual
1 Contents Statement ........................................................................................................................ 2 Chapter 1 Product Intro ................................................................................................... 3 1.1 Intro ................................................................................................................... 3 1.2 Precaution before using battery ......................................................................... 4 1.3 Charger ............................................................................................................. 5 1.4 Notes ................................................................................................................. 6 Chapter 2 Installation instructions .................................................................................... 7 2.1 Appearance ........................................................................................................... 7 2.2 Install Micro SD and SIM cards .............................................................................. 9 2.3 Battery charge ..................................................................................................... 10 2.4 Buttons and function area display ........................................................................ 11 Chapter 3 Call function .................................................................................................. 12 3.1 Calling numbers ................................................................................................... 12 3.2 Contacts .............................................................................................................. 12 3.3 SMS and MMS ..................................................................................................... 12 Chapter 4 Barcode reader-writer ................................................................................... 13 Chapter 5 Infrared read-write function ........................................................................... 15 Chapter 6 RFID reader .................................................................................................. 16 6.1 UHF ..................................................................................................................... 16 Chapter 7 Other functions ............................................................................................. 17 7.1 PING tool ............................................................................................................. 17 7.2 Bluetooth ............................................................................................................. 18 7.3 GPS ..................................................................................................................... 19 7.4 Volume setup ....................................................................................................... 20 7.5 Sensor ................................................................................................................. 21 7.6 Keyboard ............................................................................................................. 22 7.7 Network ............................................................................................................... 23 7.8 Keyboard emulator (optional) ............................................................................... 24 Chapter 8 Device characteristic ..................................................................................... 25
2 Statement 2013 by ShenZhen Chainway Information Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Chainway grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Chainway. Chainway reserves the right to make changes to any software or product to improve reliability, function, or design. Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Chainway products.
3 Chapter 1 Product Intro 1.1 Intro C72 device is a smart mobile PDA that integrated with various features such as wireless communication, data acquisition, wireless transmission, data processing and UHF scanning etc. It is configured with Andriod 6.0 OS and it possesses high reliability and expansibility. With a set of advanced data acquisition options, C72 can be operated in various industries to acquire precise and abundant datum automatically. Meanwhile, the device can match the options with staffs accordingly. The corporation which deployed C72 will realize the deployment work is simple and maintenance work will be remarkably decreased. C72 is highly rugged, compact and durable. With IP65 water and dust proof capability, the device has met IEC sealing standard. Therefore, it can be operated by staffs such as railway inspector, road toll operator, vehicle inspector, delivery postman, power supply inspector, storage administrator, financial & insurance, police officers, security tracing etc. Wherever your staff’ locations are, C72 can remain its connectivity with the system to make sure business in high-effective operating. C72 mobile data terminal adopted 4G LTE technology to realize multipath communication and calling function for field work, data exchange efficiency has been enhanced simultaneously. Therefore, C72 will bring the largest investment return for enterprises.
4 1.2 Precaution before using battery  Do not leave battery unused for long time, no matter it is in device or inventory. If battery has been used for 6 months already, it should be check for charging function or it should be disposed correctly.  The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly charged for 300 to 500 times. (One full battery charge period means completely charged and completely discharged.)  When Li-ion battery is not in used, it will continue discharge slowly. Therefore, battery charging status should be checked frequently and take reference of the related battery charging information on the manuals.  Observe and record the information of a new unused and non-fully charged battery. On the basis of operating time of new battery and compare with a battery that has been used for long time. According to product configuration and application program, the operating time of battery would be different.  Check battery charging status at regular intervals.  When battery operating time drops below about 80%, charging time will be increased remarkably.  If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery.  Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
5 1.3 Charger The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug considered as disconnect device of adapter.
6 1.4 Notes Note: Using the incorrect type battery has danger of explosion. Please dispose the used battery according to instructions. Note: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Note: The adapter shall be installed near the equipment and shall be easily accessible. Note: The suitable temperature for the product and accessories is 0-10℃ to 50℃. Note: CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
7 Chapter 2 Installation instructions 2.1 Appearance
8 Buttons instruction Button Description Side button 1.Power Located on left side, press to ON/OFF device. 2.Function key Located on left side, its function can be defined by software. 3.SCAN Scanning button located on both sides. There are two scanning buttons. Main button 4.Menu Display main menu. 5.Home Touch it back to main screen. 6.Enter Press to confirm current selection. 7.Backspace Return to last step to setup.
9 2.2 Install Micro SD and SIM cards The cards sockets are showing as follows:
10 2.3 Battery charge By using USB Type-C contact, the original adaptor should be used for charging the device. Make sure not to use other adaptors to charge the device.
11 2.4 Buttons and function area display C72 has 4 side buttons, 4 main buttons and trigger on pistol, UHF scanning area, 2D scanning module, HD camera and flashlight locate on the top.
12 Chapter 3 Call function 3.1 Calling numbers 1. Click icon . 2. Click number key to input phone numbers. 3. Click icon to call. 4. Click icon to end call. 3.2 Contacts 1. Click contacts to open contacts list. 2. Click icon to add new contacts. 3. Click icon to import/export contacts. 3.3 SMS and MMS 1. Click to open message window. 2. Click to input message receiver and contents. 3. Click to send out messages. 4. Click to add attachment pictures and videos.
13 Chapter 4 Barcode reader-writer 1. In App Center, to open 2D barcode scan test. 2. Press “SCAN” button or click scan key to start scanning, the parameter “Auto interval” can be adjusted. Caution: Please scan codes in correct way otherwise the scanning will be failed. 1D barcode: 2D code:
14 Max. radiant power: 0.6mW Wave length: 655nM IEC 60825-1 (Ed.2.0). 21CFR 1040.10 and 1040.11 standard.
15 Chapter 5 Infrared read-write function 1. Open infrared function in App Center. 2. Click button “Open” to start infrared scanning function. Click “LED” for infrared scanning aim assist. Depending on different application status to compile different commands to realize infrared read and write function.
16 Chapter 6 RFID reader 6.1 UHF Click App Center, open “UHF” to read and write, kill and lock UHF tag.
17 Chapter 7 Other functions 7.1 PING tool 1. Open “PING” in App Center. 2. Setup PING parameter and select external/internal address.
18 7.2 Bluetooth 1. Open “BT Printer” in App Center. 2. In the list of detected devices, click the device that you want to pair. 3. Select printer and click “Print” to start printing contents.
19 7.3 GPS 1. Click “GPS” in App Center to open GPS test. 2. Setup GPS parameters to access GPS information.
20 7.4 Volume setup 1. Click “Volume” in App Center. 2. Setup volume by requirements.
21 7.5 Sensor 1. Click “Sensor” in App Center. 2. Setup the sensor by requirements.
22 7.6 Keyboard 1. Click “Keyboard” in App Center. 2. Setup and test the main value of the device.
23 7.7 Network 1. Click “Network” in App Center. 2. Test WIFI/Mobile signal by requirements.
24 7.8 Keyboard emulator (optional) The keyboard emulator can be used in multiple operating background and output formats directly. And it includes Prefix/Suffix/Enter/TAB. Please check Keyboard emulator manual for more details.
25 Chapter 8 Device characteristic Physical characteristics Size 164.2mm*78.8mm*17mm Weight <654g(battery included) Display 5.2 inch，IPS FHD 1920*1080P Touch panel 4 main keyboards, 1 power button, 2 scan buttons, 1 multi-function button Battery Li-ion, rechargeable, 8000mAh Expansion Supports up to 32 GB Micro SD card Expansion Slot 1 slot for SIM card, 1 slot for SIM or TF card Audio speaker, 2 microphones, voice call Camera 13MP autofocus camera with flashlight Performance CPU Cortex-A53 1.3GHz Quadcore OS Andriod 6.0 RAM 2GB RAM Communication Interface USB2.0,Type-C,OTG ROM 16GB Max.expansion Supports up to 32 GB Micro SD card User environment Operating temp. -10℃ to 50℃ Storage Temp. -40℃ to 70℃ Humidity 5%RH - 95%RH non condensing Sealing IP65, IEC sealing standard Drop specification Multiple 1.8m/4.0ft drops to the concrete
26 Communication WAN 2G: 850/1900MHz 3G: 850/1700/1900MHz 4G: B2, B4, B7, B12, B17 WLAN IEEE802.11 a/b/g/n, 2.4G/5G dual-band, internal antenna WPAN Bluetooth 4.0 Data collection Barcode scanning 2D scanning engine(Zebra SE4710/Zebra SE4750MR/Honeywell N6603) RFID NFC 13.56Mhz RFID 902-928MHz Developing Environment SDK Chainway software develop kit Language Java Develop Eclipse/Android Studio
27 FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. FCC Radiation Exposure Statement . This device was tested for typical body‐worn operations with the back of the handset kept 10mm from the body.
28 To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10 mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. RF Exposure Information(SAR) The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device Types C72 (FCC ID: 2AC6AC72) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is1.168 W/kg and for head is 0.24 W/kg.

Navigation menu