Chainway Information Technology C4000-A Mobile Data Terminal User Manual C4050

Shenzhen Chainway Information Technology Co., Ltd. Mobile Data Terminal C4050

Contents

User manual_C4050

www.chainway.net C4050 Handheld Terminal User Manual
www.chainway.net ○C 2013 by Shenzhen Chainway Information Technology Co., Limited. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission written from Shenzhen Chainway. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Shenzhen Chainway grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Shenzhen Chainway. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Shenzhen Chainway. Shenzhen Chainway reserves the right to make changes to any software or product to improve reliability, function, or design. Shenzhen Chainway does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Shenzhen Chainway intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Shenzhen Chainway products. Shenzhen Chainway Information Technology Co., Ltd Address: 9/F, Building 2, Phase 2, Gaoxinqi Industrial Park, Liuxian 1st Rd, District 67, Bao‟an, Shenzhen, Guangdong, China Telephone：+0086-755-23223300 Fax: +0086-755-23223310 Web Site: www.chainway.net Email: service@chainway.cn Web Site: www.chainway.net
www.chainway.net CATALOGUE Chapter 1 Getting Started ...........................................................................................................4 Chapter 2 About The Device ......................................................................................................6 Chapter 3 Call Function .............................................................................................................9 Chapter 4 Barcode Reader ....................................................................................................... 11 Chapter 5 RFID Reader ........................................................................................................... 13 Chapter 6 Fingerprint Reader .................................................................................................. 17 Chapter 7 The Other Functions ............................................................................................... 18 Chapter 8 Device Specifications ............................................................................................. 24
www.chainway.net Chapter 1 Getting Started 1.1 Brief Instruction Chainway C4050 is a series of Android powered smart terminals, with data capture, data processing, wireless communication. It is with high-reliability & high-expansibility. Auto & Accurate data collection is achieved in various business fields via a complete solution of premium options, the flexible solution among options and operators is suited-up. You will find out with C4050, much easier deployment, reduced complexity, decreased maintenance, are the benefits for enterprises. C4050 meets industrial level IP64 (IEC sealing), is sufficient to routine applications, eg, railway inspection, road parking toll, vehicle inspection, logistics express, power inspection, warehousing management, chain retail, etc. Whether the mobile operators are working indoor or outdoor, with Chainway C4050, your business is always &highly efficient on-line. Meeting industrial standards, designed to support a various of mobile solutions. With the build-in high performance Cortex-A7 1.3GHZ quad core processor technology, the operators need only one device to enjoy a convenient and easy job, C4050 will be the ideal choice for key-fact business in mobile solutions, for simplified task flow, enhanced work efficiency, for shortened time to customer response, more satisfied customer care service. Chainway C4050 comes with world wide band WCDMA technology. Multi channels data and voice communication guarantees the real-time communication and data efficiency, C4050 brings you the best ROI. 1.2 Precaution Before Using Battery  Do not leave batteries unused for extended periods of time, either in the product or in storage. When the battery has been unused for 6 months, check the charge status and charge or dispose of the battery as appropriate.  The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully recharged again. Use a two to three year life expectancy for batteries that do not run through complete charge cycles.  Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity, the length of time it will power the product (run time) decreases.  Lithium-Ion batteries continue to slowly discharge (self-discharge) when not in use or while in storage. Routinely check the battery‟s charge status. The user manual typically includes information on how to check battery status, as well as battery charging instructions.  Observe and note the run time that a new fully-charged battery provides for powering your product. Use the new battery run time as a basis to compare run times for older batteries. The run time of your battery will vary depending on the product‟s configuration and the applications that you run.  Routinely check the battery‟s charge status.  Carefully monitor batteries that are approaching the end of their estimated life.
www.chainway.net Consider replacing the battery with a new one if you note either of the following conditions:  The battery run time drops below about 80% of the original run time.  The battery charge time increases significantly.  If a battery is stored or otherwise unused for an extended period, be sure to follow the storage instructions in this document. If you do not follow the instructions, and the battery has no charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a new battery.  Always follow the charging instructions provided with your product. Refer to your product‟s user manual and/or online help for detailed information about charging its battery.  Charge or discharge the battery to approximately 50% of capacity before storage.  Charge the battery to approximately 50% of capacity at least once every six months.  Remove the battery and store it separately from the product.  Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
www.chainway.net Chapter 2 About The Device 2.1 Structure <Front>
www.chainway.net <Back> Buttons: Button Function 1. Power Button Press and hold to turn the device on or off 2. App List View Button View a list of apps running 3. Home Button Press to return to the home screen 4. Cancel Button Tap to return to the previous screen 2.2 SD Card Installation Detailed installation steps are as follows: 1. Open the SIM slot as the direction of „Open/Lock‟ labeled; 2. Open the SD slot as the direction of „Open/Lock‟ labeled; 3. Install the SD card properly; 4. Lock the SD slot and SIM slot properly;
www.chainway.net 2.3 SIM Card Installation 1. Open the SIM slot as the direction of „Open/Lock‟ labeled; 2. Install the SIM card correctly; 3. Lock the SIM slot properly; 2.4 Battery Installation 1. Push the battery down into the bottom of the battery; 2. Push the battery to the direction of the array; 3. Turn the battery lock; 2.5 Battery Charging 2.5.1 Direct Charging Use the adapter to charge the battery via the USB connector of the snap-on;. 2.5.2 Cradle Charging Connect the adapter with the power cable to charge the device. 2.6 Device Turning on/off Press the „Power‟ button on the side shortly due to turn on/off. 2 3
www.chainway.net Chapter 3 Call Function 3.1 Phone 1. Click this icon : 2. Click the number button to input the numbers; 3. Click the button to confirm and dial; 4. Click the to end the calling; 3.2 Contacts 1. Click „Contacts‟ to open the contacts list; 2. Click „ ‟ to add the new contact; 3. Click „ ‟ to import/export or delete the contact list; Contacts Logs Voice Calling Emulated Numeric Keypad
www.chainway.net 3.3 Messaging 1. Click „ ‟ to open the message list; 2. Click „ ‟ to input the content; 3. Click „ ‟ to send the message; 4. Click „ ‟ to add photos, videos; Favorites Contact List Group
www.chainway.net Chapter 4 Barcode Reader 4.1 1D Barcode 1) Open the 1D Barcode Demo in Appcenter; 2) Press the „Scan‟ button to start scanning, then the auto interval parameters can also be set; 4.2 2D Barcode 1) Open the 2D Barcode Demo in Appcenter; 2) Press the „Scan‟ button to start scanning, then the auto interval parameters can also be set;
www.chainway.net 4.3 2D(S) Barcode 1) Open the 2D(S) Barcode Demo in Appcenter; 2) Press the „Scan‟ button to start scanning, then the auto interval parameters can also be set; 3) Also, the barcode types enabling/disabling can also be set; Note: Please scan the barcode correctly, otherwise the scanning might be failed;
www.chainway.net Chapter 5 RFID Reader 5.1 Low Frequency 1. Open the RFID_LF Demo within Appcenter and then press the „Scan‟ button to start reading; 2. Tag types including ID Card/Animal Tag/Hitag/HDX Tag/EM4450 can be also selected, and Hitag-S and EM4305 reading/writing are already supported by the device; Note: please ensure that the LF module is embedded in the device, also please select the tag type correctly, otherwise the operation might not work. Meanwhile, please pay attention to the HDX and FDX-B since they are using different hardware due to the different working principles. 5.2 High Frequency
www.chainway.net 5.2.1 14443A 1. Open the 14443A demo within Appcenter, and press the „Scan‟ button to start reading; 2. Mifare and Ultra Light reading/writing are also supported; 5.2.2 15693 1. Open the RFID_15693 demo within Appcenter, and press the „Scan‟ button to start scanning; 2. 15693 writing are also supported;
www.chainway.net 5.3 Ultra High Frequency 1. Open the UHF demo within Appcenter, and press the „Start‟ button to start scanning; 2. Multiple tags reading and single tag reading/writing are also supported;
www.chainway.net
www.chainway.net Chapter 6 Fingerprint Reader 1. Open the Fingerprint Demo in Appcenter; 2. Put the finger to the fingerprint module and set the ID/name of the template under „ACQUISITION‟; 3. Put the finger to the fingerprint module properly and identify by ID/Name/Score under „IDENTIFICATION‟; 4. The local templates can also be checked under „Data‟; Note: Please be aware that ISO standards are only supported by the ISO fingerprint hardware module.
www.chainway.net Chapter 7 The Other Functions 7.1 PING 1. Open the Ping in Appcenter; 2. Set the Ping parameters and select the internal/external addresses; 7.2 Bluetooth 1. Open the Bluetooth demo in Appcenter and turn on the Bluetooth; 2. Input the content or select the file, then scan the nearby Bluetooth printer and pair them; 3. Select the printer and click „Print‟ to print the content;
www.chainway.net 7.3 GPS 1. Open the GPS demo in Appcenter and turn on GPS module; 2. Set the GPS parameters and get the GPS data information;
www.chainway.net 7.4 Volume Settings 1. Open the Volume Setting demo in Appcenter; 2. Set the volumes based on the requirements;
www.chainway.net 7.5 Sensor 1. Open the Sensor demo in Appcenter; 2. Test the sensor based on the requirements; 7.6 Keyboard 1. Open the Keyboard demo in Handset Appcenter; 2. Set and test the key values of the device;
www.chainway.net 7.7 Network 1. Open the Network demo in Appcenter; 2. Test the WIFI/Mobile signal based on the requirements; 7.8 KeyboardEmulator Keyboard Emulator can be used directly for multiple using environments and the output formats can including prefix/suffix/enter/tap can also be defined, please define the options properly based on the features of the device. 1) Open the KeyboardEmulator which is preinstalled in the device;
www.chainway.net 2) Click the options correctly based on the features of the device hardware, please also press the physical button to define the scan button, then please define the output formats based on the requirements, finally click „Open‟ to save and enable it ;
www.chainway.net Chapter 8 Device Specifications Physical Characteristics Dimensions 153mm*75mm*29mm/6.02*2.95*1.14in. Weight 286g/10.09oz. (includes main battery) Screen 4in.WVGA (480*800) TFT-LCD, capacitive dual touch Keyboard 43 keys(QWERTY) Battery Main bat. (rechargeable li-ion polymer, 3.7V, 3200 mAh) Pistol bat. (rechargeable li-ion polymer, 3.7V, 5200 mAh) Expansion Slot MicroSD/TF, maximum capacity of 32G SIM Slot 1 PSAM, 1 SIM, 1 MicroSD Audio 0.5W Camera OV 8M pixels, auto focus with LED flash Performance Characteristics CPU Cortex-A7 1.3GHz quad core OS Android 4.4.2 Memory 1GB RAM, Build-in 4GB Flash Interface USB Micro-B, serial port RS-232(TTL) Storage Card Type MicroSD card Maximum Expansion Storage 32GB User Environmental Characteristics Operating Temperature -10℃ to 45℃ Storage Temperature -40℃ to 70℃ Humidity 5%RH-95%RH（non-condensing） Dropping Survive 1.2m/3.9ft. drop, 6 sides (concrete floor under operating temp.) Sealing IP64, IEC compliance Wireless Communication WAN WCDMA/HSDPA/HSPA+ (850/1900/2100MHz) GSM/GPRS/EDGE (850/900/1800/1900MHz) WLAN IEEE802.11b/g/n, internal antenna WPAN Bluetooth v4.0 Low Energy Bluetooth 3.0+HS Bluetooth v4.0 Low Energy (LE) Data Collection Barcode Scan Engine 1D barcode（Symbol SE955, laser）
www.chainway.net 2D CMOS laser scanner: Symbol SE4750 Sensor resolution: 750 (horizontal ) * 480 (perpendicular) pixel (gray level) Roll tolerance: 360º Pitch tolerance: ±60º Skew tolerance: ±60º Ambient light: 9000ft.candles/96900 lux (lightless) Aiming LED (VLD): 655nm ± 10nm Illumination element: 650nm ± 5nm Field of view: 40º horizontal，25º perpendicular Barcode type: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal Dutch Postal (KIX),ect. Decode ranges SR Focus Near Far 5 mil Code 39 2.1 in./53 mm. 7.5 in./191 mm. 100% UPC/ENA 1.6 in./41 mm. 15.5 in./394 mm. 6.7 mil PDF417 3.4 in./86 mm. 7.1 in./180 mm. RFID LF 125KHz HF 13.56MHz UHF 902-928MHz- Developing Environment SDK Chainway SDK Programming Language Java Developing Tool Eclipse
Regulatory Conformance Hereby, ShenZhen Chainway Information Technology Co.,Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Safety Information and Notices Failure to comply with the following precautions may be dangerous or illegal. Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool…). Protect it from liquids and other moisture. The max. Recommended temperature is -10~45°C. Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Please carefully read and observe the terms below: Distance of operation This phone model has been tested and meets radio frequency exposure guidelines when used as follows: • Against the ear: Place or receive a phone call and hold the phone as you would a wire line telephone. • Body worn: When transmitting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 1.0 cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 1.0 cm from your body, • Data operation: When using a data feature, position the phone a minimum of 1.0 cm from your body for the whole duration of the data transmission. Adapter Adapter shall be installed near the equipment and shall be easily accessible. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Proper use As described in this manual, your mobile phone can be used only in right location. If possible, please do not touch the antenna area on your phone.
www.chainway.netFCC Caution § 15.19 Labeling requirements. The 15.19 statement is used. They should have used the one for Licensed devices: “This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.” § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Body Operation This device was tested for typical body-Support operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the device, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not
www.chainway.netcomply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. FCC RF exposure information (SAR). This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.

Navigation menu