Centrica Hive SP11 Wireless Smartplug User Manual Alarm Sensor

AlertMe.com Ltd Wireless Smartplug Alarm Sensor

Contents

Device Specific Pairing Instructions

Iris Smart Button Squeeze sides together then hinge open.  Insert battery checking correct orientation.  Replace cover. The button will flash until it has been added to your system.   Repeat this for all buttons then click ‘ok’
Iris Motion Sensor Squeeze sides together then hinge open.  Insert battery checking correct orientation.  Replace cover. The sensor will flash until it has been added to your system. Repeat this for all motions sensors then click ‘ok’ Need to use v2 sensor images
Iris Wireless Video Camera Plug the camera into a power socket using the supplied cable and adapter and turn on. Connect the camera to a network port on your router using the supplied cable. 1. 2. Repeat this for all cameras then click ‘ok’. Need to use new camera image network Power
Blue Line Optical Electricity Meter Reader PROCESS TBD Down load the driver Connect the gateway Start the install  Add the reader Pair reader and gateway Pair gateway and hub
Iris Door/Window/Cabinet Sensor Squeeze sides together then hinge open.  Insert battery checking correct orientation.  Replace cover. The sensor will flash until it has been added to your system.
Iris Smart Key Fob Lever open the key fob using the supplied tool.  Insert battery checking correct orientation.  Slide the thin end together then squeeze closed. Key fob will flash until it has been added to your system. Repeat this for all key fobs then click ‘ok’
2. Iris Smart Plug The light on the front of the Smart Plug will flash until it has been added to your system. Plug the Smart Plug into an outlet that is no more than 10 foot from your smart hub. Repeat this for all smart plugs then click ‘ok’ Use the US smart plug here  And a US socket
Iris Smart Keypad Remove the back of the keypad as shown  Insert the batteries checking correct orientation. The ‘off’ light will flash until it has been added to your system. Repeat this for all keypads then click ‘ok’
RTOA Smart Thermostat Install the thermostat as instructed in the printed manual.    TBD  […] will flash until it has been added to your system.
2. GE On/Off Light Switch To include your light switch press the top of the rocker switch. The smart hub will beep when it has been found.    Install the switch as instructed in the printed manual.
2. GE Dimmer Light Switch To include your dimmer switch press the top of the rocker switch. The smart hub will beep when it has been found.  Install the switch as instructed in the printed manual.
2. GE Outdoor Module To include your outdoor module press the button on the front of the module. The smart hub will beep when it has been found.  Plug the Outdoor module into an outlet that is no more than 10 foot from your Smart Hub.  Show plugged into a power outlet Show plugged into a power outlet
2. GE Duplex Receptacle To include your duplex receptacle press the button on the front of the receptacle. The smart hub will beep when it has been found.   Install the outlet as instructed in the printed manual.
2. GE 3 Way Switch To include your 3 way switch press the top of the rocker switch. The smart hub will beep when it has been found.   Install the switch as instructed in the printed manual.
Schlage Deadbolt Doorlock - Nickel Follow the printed instructions to install your Smart Deadbolt into your door. Note the 6 digit program code from the sticker on the lock.  Enter the six digit program code. Wait for the Schlage button to flash and beep three times.   Press the Schlage button and then the number 0. The hub will beep once it has found the lock.
Schlage Level Doorlock - Nickel Follow the printed instructions to install your Smart Deadbolt into your door. Note the 6 digit program code from the sticker on the lock. Enter the six digit program code. Wait for the Schlage button to flash and beep three times.  Press the Schlage button and then the number 0. The hub will beep once it has found the lock.
2. Iris Range Extender The light on the range extender will flash for a while until it is added to your system. This should take no more than 5 minutes. Plug the range extender into an outlet that is no more than 10 foot from your smart hub.

Navigation menu