Cellphone Mate SureCall FLARE-3 Five band Cellular in home booster User Manual

Cellphone-Mate Inc. dba SureCall Five band Cellular in home booster Users Manual

Users Manual

Flare™ 3.0 / Flare™ 3.0 CA Cellular signal booster kit with combined booster and indoor antenna User Guide
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.comIntroduction2Thank you for purchasing SureCall’s Flare 3.0 cellular signal booster kit. SureCall’s Flare 3.0 was specically designed to eliminate frustrations over dropped calls and limited range by amplifying incoming and outgoing cellular signals in homes and oces. If you have any questions during setup, please reach out to our US-based experienced support technicians:Call: 1-888-365-6283 Email: support@surecall.comOr,visit: www.surecall.com/supportWatch installation, optimization and troubleshooting techniques on our SureCall YouTube channel@SureCall Stay up to date with all things SureCall
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.comTable of ContentsTABLE OF CONTENTSHow it works .................................................................................................................................... 4PACKAGE CONTENTS ........................................................................................................................ 5BEFORE INSTALLATION ..................................................................................................................... 6Installation Overview ........................................................................................................................ 6FLARE 3.0 INSTALLATION .................................................................................................................. 6Step 1. Find the Area With the Strongest Signal ............................................................................ 6Step 2. Install the Outside Antenna ................................................................................................. 8Step 3. Place the Booster ............................................................................................................. 10Step 4: Connect to Power ............................................................................................................. 10Enjoy Boosted Signal ..................................................................................................................... 11IF YOU WANT TO IMPROVE PERFORMANCE ................................................................................ 11LED INDICATORS .............................................................................................................................. 11TROUBLESHOOTING ........................................................................................................................ 12SPECIFICATIONS .............................................................................................................................. 12Kitting Information ......................................................................................................................... 13CONSUMER GUIDELINES ................................................................................................................ 14WARRANTY ....................................................................................................................................... 15Three-Year Product Warranty ........................................................................................................ 15Limitations of Warranty, Damages and Liability ........................................................................... 153
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com4How It WorksHow it works 1. An outside antenna collects signal from the cell tower.2. The outside antenna sends the signal to the booster through coax cable.3. The booster amplies the cell signal and rebroadcasts the signal indoors to all mobile devices within range.4. The booster amplies outgoing cell signal back to the tower.minimum 25 ft. separationCablePower SupplyBoosterOutside Omni Antenna (a)Outside Yagi Antenna (b)How the SureCall Flare 3.0 Booster Works
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 5Package ContentsWarning: Unauthorized antennas, cables, and/or coupling devices are prohibited by FCC new rules. Please contact FCC for details: 1-888-CALL-FCC. Changes or modications not expressly approved by SureCall could void the user’s authority to operate the equipment.1. Flare 3.0 Cellular Booster 3. Indoor Cable (50 ft.)4. Outside Antenna Options:PACKAGE CONTENTSUnpack all package contents. For missing or damaged items, contact your reseller.Turn over the signal booster and record the model and serial number for reference: Serial #: ________________________________________________________________ Purchase Date: __________________________________________________________ Keep the carton and packing material to store the product in case you need to return. Your Flare 3.0 signal booster package includes the following items:1. SureCall Flare 3.0 signal booster2. Power supply 3. Cable for connecting the outside antenna to the signal booster4. One outside antenna (either omni or Yagi antenna)2. Power Supply4b. Outside Yagi Antenna 4a. Outside Omni Antenna OR
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com6BEFORE INSTALLATION1. Prior to securing the location of any booster parts, a “soft install” is recommended as adjustments may be needed to optimize performance.2. Your planned location for the booster (central to where signal is needed) should be near an existing electrical outlet.3. Ensure adequate separation between the planned locations of the booster and outside antenna (at least 25 ft.). 4. Ensure sucient cable length between the outside antenna location and booster location. The length of the provided cable is 50 ft. Installation OverviewStep 1. Find the outside area with the strongest signal.Step 2. Install the outside antenna Step 3. Place the Flare 3.0 on a table or desktop, center of the area where signal is needed. Step 4. Connect the booster to an AC power source.FLARE 3.0 INSTALLATIONStep 1. Find the Area With the Strongest SignalUsing your phone, identify the outside location with the strongest signal for placement of your outside antenna. Generally, this is found above the rooine on the side facing your nearest cell tower and as high as possible – where the antenna can ‘see’ your cell tower. To nd the location of your carrier’s closest cell tower, go to www.antennasearch.com. The coverage area that the booster provides is directly related to the strength of incoming signal received by the outdoor antenna. Mounting the outside antenna where the signal is the strongest will provide the best results. Please note, as seen in the table below, if signal is extremely weak where the outside antenna is installed, indoor coverage will be limited.Estimated coverage:Outdoor signal strength (dB) 1-2 Bars (-85 to -95)3-4 Bars (-75 to -84)5 Bars (-65 to -74)Flare 3.0 with Omni antenna extimated coverage (sq. ft.)1000 2.000 4.000Note that Bars are not always a reliable measure of signal. The best way to conrm signal coverage is the ability to place and hold a call. Putting your phone in Field Test mode will also indicate what level of decibels (dB) your phone is currently receiving. Decibels are measured in the negatives, and a score closer to zero indicates you have a better signal. A signal of Before Installation
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 7-120 dB indicates you have no service, while a score of about -50 dB means you have excellent signal strengthFor specic dB signal measurements, use the methods below.• Apple iPhones: Dial *3001#12345#* and press Call. In the top-left corner, a dB number appears instead of bars.• Android devices: download the app “Network Signal Info” in the Google Play store.Step 2. Install the Outside AntennaAfter identifying the area of strongest signal, choose the surface where you will mount the outside antenna. Using the provided hardware, mount the outside antenna at the highest possible elevation, allowing a minimum separation of 25 feet from the planned location of the booster. Once the outside antenna is secured, connect one end of the provided cable to the outside antenna and tighten the connection. Do not collocate antennas or operate the outdoor antenna with any other antenna or signal booster. InstallationSignal StrengthExcellent-50 dB-60 dB-70 dB-80 dB-90 dB-100 dBGoodPoor
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com8Option B:Yagi AntennaOption A:Omni Antenna Option A: Omni Antenna The omni antenna is omni-directional, which receives and sends signals in a 360º radius. The provided hardware allow for either a surface mount or pole-mount. Mount antenna to a vertical surface: 1. Using vertical plate of bracket, mark position of desired placement. The omni antenna should be mounted in an upright position (See “Omni Outside Antenna Install Illustration” on page 9) 2. Unscrew nut from end of stucco screw and remove it along with lock washer and regular washer.3. Place vertical plate into desired location and tap the screws, head rst, along with sleeve, into stucco 1/2 to 5/8 inches deep into place.4. In this order, place washer, lock washer and nut on each screw and tighten until secure. When tightening screw, sleeve will expand to secure plate.5. Remove screws from antenna base and use to secure antenna onto horizontal plate.6. Connect antenna to one end of the provided RG6 cable and tighten the connection. Run the cable along route to planned location of your booster.Note: Alternate screws may be required for diering surfaces such as wood or concrete.InstallationPole-mount hardwareOmni antenna with surface mount hardware
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 9InstallationOption B: Outside Yagi Antenna Before installing a Yagi, or directional antenna, note that the antenna should be mounted on a pole or pipe (not provided), at the highest possible location and mounted horizontally, aimed in the direction of your nearest cell tower. To nd the location of your carrier’s closest cell tower, go to www.antennasearch.com. Ensure that the mounting area has at least a 12-inch radius clear of obstructions and other radiating elements and orient the antenna with the drip hole at the bottom. Once you have identied your install location, assemble the u-bolt, bracket, nuts and washers onto a pole or pipe (not provided) as shown in the illustration. Keep the connections loose enough to allow the antenna to rotate until CablePlannedBoosterLocationOutside Antennaminimum 25 ft. separationOmni Outside Antenna Install IllustrationNuts & WashersL-BracketCableAnchors /Sleeves ScrewsOutside Antenna AssemblyNutWasher U-boltBracketDrip HoleRG6 CableCablePlannedBoosterLocationOutside Antennaminimum 25 ft. separationOmni Yagi Antenna Install Illustration
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com10LED Indicators & Troubleshootingthe optimum direction is found. Once the outside antenna is secured to a pipe or pole, connect antenna to one end of the provided RG6 cable and tighten the connection. Run the cable along route to planned location of your booster. IMPORTANT:: FCC 27.5 (d)(4): Fixed, mobile, and portable (hand-held) stations operating in the 1710-1755 MHz band as well as mobile and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP. Fixed stations operating in the 1710-1755 MHz band are limited to a maximum antenna height of 10 meters above ground. Step 3. Place the Booster Place the booster in a central location where signal is needed and at least 25 ft. from the outdoor antenna location. When placing the booster, note that further separation between the booster and outside antenna will increase booster performance. Connect the open end of the RG6 cable from the outside antenna to the booster and tighten connection. Please note that the performance and range of your booster depends on three factors: 1. Signal strength at the location of the outside antenna. 2. Interior building materials between the booster and your mobile device.3. Distance between the outside antenna and booster (while at least 25 ft. separation is recommended, further separation will increase performance).Note: This booster should not be used near open re or ame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment.Placing Booster and connecting cableConnecting the Power SupplyNote: This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury, and void your warranty.Step 4: Connect to PowerOnce the booster and outside antenna are connected and in place, connect the power cord to the signal booster and plug into a power outlet.
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 11SpecicationsEnjoy Boosted SignalPlace a call in the room where the booster is located to conrm that your phone is receiving a boosted signal. Remember: Bars are not always a reliable measure of signal. The best way to conrm signal coverage is the ability to place and hold a call. IF YOU WANT TO IMPROVE PERFORMANCE• Identify a location outside that receives a stronger signal and move the outside antenna to that location (higher is usually better. • Increase the distance between the booster and outside antenna. • If using an omni outside antenna, upgrade to a directional yagi antenna that can be aimed toward your closest tower.OKBestAntenna PositionBest Antenna SeparationBest Antenna SeparationLED INDICATORSLED PositionLED ColorLED ConditionIndicationLeft Yellow Flashing Automatic Gain Control (AGC) is self-adjusting. This is part of normal operation.Right Yellow Flashing Automatic Gain Control (AGC) is preventing oscillation. If this happens: Increase separation between outside antenna and booster to optimize performance.Left Red Flashing The booster is receiving too strong of a signal which could cause the booster to automatically turn o.If this happens, relocate the outside antenna to a location where the signal is weaker. If using a Yagi outside antenna, turn in small increments away from cell tower until Red ashing stops.Right Red / Yellow Alternately FlashingBooster function has shut o to prevent oscillation. If this happens: Increased separation between the outside antenna and Flare 3.0 booster is needed to continue proper operation.Booster LED DiagramLeft LED Right LEDPower LED
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com12KittingTROUBLESHOOTINGIf you have any questions during setup, please reach out to our US-based experienced support technicians:Call: 1-888-365-6283, Email: support@surecall.com, or Visit: www.surecall.com/supportProblem ResolutionSignal booster has no power Connect the power supply to an alternate power source.Be sure the power source is not controlled by a switch that can remove power from the outlet.Check the POWER LED () on the signal booster. If it is OFF, contact tech support at: 1-888-365-6283 or support@surecall.com, or go to www.surecall.com/supportAfter installing your signal booster system, you have no signal or receptionVerify that cable connections are tightly tted to the booster and antenna.Try further separating the booster and antenna. Verify that there is usable signal where the antenna is placed.Remember: Bars are not always a reliable measure of signal. The best way to conrm signal coverage is the ability to place and hold a call. SPECIFICATIONSFlare 3.0 (U.S.) ; Flare 3.0 CA (Canada)Uplink Frequency Range (MHz): 698–716 / 776–787 / 824–849 / 1850–1915 / 1710–1755 Downlink Frequency Range (MHz): 728–746 / 746–757 / 869–894 / 1930–1995 / 2110–2155 Donor/Server Port Impedance: 75 ohm / 50 ohmMaximum Gain: 72 dBNoise Figure: 7 dBVSWR: ≤2.0Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO 4G and all cellular standardsAC Input: Input: AC 110 – 240 V, 60 Hz ; Output: DC 5V / 3AMaximum Output Power: 1 Watt EIRPCable: RG6 (50 ft.)RF Connectors: Donor port: F Female, Server port: IntegralPower Consumption: <12WWeight: 1. 8125 lb. Dimensions: 5.125 × 7.25 × 5.625 inchesCertications: FCC ID: RSNFLARE-3 ; IC : 7784A-FLARE3Note: The term “IC” before the radio certication number only signies that Industry Canada technical specications were met.
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com 13Kitting KittingPreAGC PreAGCPulse GSM 4.1 MHz AWGNFrequency (MHz) Input (dBm) Output (dBm) Gain (dB) Input (dBm) Output (dBm) Gain (dB)Uplink: 1710-1755 -49.5 20.0 69.5 -49.0 19.4 68.4Uplink: 1850-1915 -49.5 22.1 71.6 -45.8 21.6 67.4Uplink: 824-849 -39.3 25.3 64.5 -36.6 26.0 62.6Uplink: 698-716 -36.8 25.0 61.8 -37.1 25.2 62.3Uplink: 777-787 -38.6 22.1 60.7 -38.4 20.5 58.9Downlink: 2110-2155 -55.2 12.5 67.7 -57.0 10.4 67.4Downlink: 1930-1995 -57.2 11.2 68.4 -60.4 8.2 68.6Downlink: 869-894 -51.2 11.8 63.0 -50.8 10.9 61.7Downlink: 728-746 -47.5 14.5 62.0 -50.7 10.7 61.4Downlink: 746-757 -45.8 11.8 57.6 -49.4 8.5 57.9Kitting InformationComponent Product number Gain/Loss NoteLTE-A707 MHzLTE-V731 MHzCellular800 MHzPCS1900 MHzAWS1700 / 2100 MHzOutdoor Antenna* SC-289W 3 dBi 3 dBi 3 dBi 4 dBi 4 dBi / 4 dBiSC-231W 8 dBi 8 dBi 8 dBi 10 dBi 10 dBi / 10 dBiOutdoor Cable* SC-RG6-50 3.32 dB 3.32 dB 3.95 dB 6.42 dB 6.22 dB / 6.68 dB 50 Feet or longerIndoor Antenna SC-322W 2.5 dBi 2.5 dBi 3 dBi 5 dBi 4 dBi / 5 dBiSC-302W 2.5 dBi 2.5 dBi 3 dBi 5 dBi 4 dBi / 5 dBi*Note: The Flare 3.0 booster is suitable for use with all equivalent and lower gain antennas, as well as, equivalent or greater lengths of cable.Warning: Any product modications that use unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC. Contact FCC for details: 1-888-CALL-FCC. Changes or modications not expressly approved by SureCall could void the user’s authority to operate the equipment.
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com14Consumer GuidelinesCONSUMER GUIDELINESThis is a CONSUMER deviceBEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-051You MUST operate this device with approved antennas and cables as specied by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from (i.e. MUST NOT be installed within 20 cm of) any person.You MUST cease operation of this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider.WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.This device may be operated ONLY in a xed location, for in-building use.Ce produit est un appareil de CONSOMMATIONAVANT DE L’UTILISER, vous DEVEZ ENREGISTRER CE DISPOSITIF auprès de votre fournisseur de services cellulaires et obtenir son consentement. La plupart des fournisseurs de services cellulaires autorisent l’utilisation d’amplicateurs de signal. Il se peut que certains fournisseurs n’autorisent pas l’utilisation de ce dispositif sur leur réseau. Si vous n’êtes pas sûr, contactez-le. Au Canada, AVANT DE L’UTILISER vous devez répondre à toutes les exigences ISED CPC-2-1-052Vous DEVEZ utiliser ce dispositif avec les antennes et les câbles autorisés, tel que le spécie le fabricant. Les antennes DOIVENT être installées à au moins 20 cm (8 po) (NE DOIVENT PAS être installées à moins de 20 cm) de toute personne avoisinante. Vous DEVEZ arrêter cet appareil immédiatement à la demande de la FCC (ISED au Canada) ou de tout fournisseur de services cellulaires autorisé. AVERTISSEMENT: Il se peut que les informations relatives à la localisation E911 ne soient pas disponibles ou soient inexactes pour les appels qui utilisent cet appareil.Cet appareil peut fonctionner seulement à un emplacement xe à l’intérieur d’un bâtiment;Register your cellular booster with your wireless carrier at the following urls:Verizon: http://www.verizonwireless.com/wcms/consumer/register-signal-booster.htmlAT&T: https://securec45.securewebsession.com/attsignalbooster.com/T-Mobile: https://support.t-mobile.com/docs/DOC-9827Sprint: https://www.sprint.com/legal/fcc_boosters.htmlU.S. Cellular: http://www.uscellular.com/uscellular/support/fcc-booster-registration.jspThis device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAN ICES-3 (B)/NMB-3(B) (Canada) :This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operationThe Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.Cet appareillage numérique de la classe B répond a toutes les exigencies de l’interférence canadienne causant des réglements d’équipment. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle intérference reçue, y compris l’intérference qui peut causer l’opération peu désirée.La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5 dB, surtout si le signal de sortie est retransmis et qu’il peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur raccordé à la sortie du dispositif. 1 For details on the requirements specied in ISED CPC-2-1-05, visit: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html2 Pour plus de détails sur les exigences ISED CPC-2-1-05, reportez-vous au site: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.comWARRANTYThree-Year Product WarrantyTo activate your three-year manufacturer’s warranty, register your SureCall product at www.SureCall.comSureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certication Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.Products returned by customers must be in their original, un-modied condition, shipped in the original or protective packaging with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the outside of the shipping container.Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal booster, such as antennas or cables.) This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or mishandling that alters or damages the product’s physical or electronic properties.SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workmanship, and will perform in full accordance with applicable specications. The limit of liability under this warranty is, at SureCall’s option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material and/or workmanship. Warranty returns must rst be authorized in writing by SureCall. Disassembly of any SureCall product by anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make changes in any of its products without incurring any obligation to make the same changes on previously delivered products. As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United States, in which case the Buyer will pay the shipping charges. The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to meet the applicable specications or which are not defective or not covered by this warranty. Products sold by SureCall shall not be considered defective or non-conforming to the Buyer’s order if they satisfactorily fulll the performance requirements that were published in the product specication literature, or in accordance with samples provided by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.Limitations of Warranty, Damages and LiabilityEXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING.SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC. FOR THE UNIT OF PRODUCT OR SERVICE FURNISHED OR TO BE FURNISHED, AS THE CASE MAY BE, WHICH IS THE SUBJECT OF CLAIM OR DISPUTE. IN NO EVENT SHALL SURECALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES, HOWSOEVER CAUSED. All matters regarding this warranty shall be interpreted in accordance with the laws of the State of California, and any controversy that cannot be settled directly shall be settled by arbitration in California in accordance with the rules then prevailing of the American Arbitration Association, and judgment upon the award rendered may be entered in any court having jurisdiction thereof. If one or more provisions provided herein are held to be invalid or unenforceable under applicable law, then such provision shall be ineffective and excluded to the extent of such invalidity or unenforceability without affecting in any way the remaining provisions hereof.SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and tness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers. SureCall shall not be held liable to anyone for any indirect, special or consequential damages due to omissions or errors. The information and specications in this document are subject to change without notice. © 2018. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners.SureCall, Inc48346 Milmont DriveFremont, California 94538, USA888.365.6283 | www.surecall.com15Warranty
SureCall, Inc48346 Milmont DriveFremont, California 94538, USA888.365.6283 | www.surecall.com

Navigation menu