Casio Computer DT-X10M30URC 2.4 GHz Handheld Terminal WLAN w/ Bluetooth User Manual

Casio Computer Co Ltd 2.4 GHz Handheld Terminal WLAN w/ Bluetooth Users Manual

Users Manual

FnBL ABC DEFGHI JKL MNOPQRSBS AlphaTUV WXYZHandheld TerminalUser’s GuideSeriesBe sure to read “Safety Precautions” inside this guide before trying to use your Handheld Terminal. After reading this guide, keep it in a safe place for future reference.E
•This Product includes Extended Systems Inc.'s XTNDConnect Blue SDK for Windows®CE operating system or its derivative work, which use is governed by a license grantedby Extended Systems Inc.•BLUETOOTH is a trademark owned by Bluetooth SIG, Inc. and licensed to CASIOCOMPUTER CO., LTD.•Microsoft and Windows are either registered trademarks or trademarks of MicrosoftCorporation in the United States and/or other countries.•Compact Flash is a trademark of SanDisk Corporation in the United States.•Datalight is a registered trademark of Datalight, Inc.•FlashFXTM is a trademark of Datalight, Inc.Copyright 1993-2000 Datalight, Inc., All Rights Reserved.U.S. Patent Office 5,860,082•Other company names and product names used in this guide are trademarks or registeredtrademarks of their respective owners.
E-1WarningCautionDangerSafety PrecautionsCongratulations upon your selection of this CASIO product. Be sure to read thefollowing Safety Precautions before trying to use it for the first time.Markings and SymbolsThe following are the meanings of the markings and symbols used in these SafetyPrecautions.This symbol indicates information that, if ignored or appliedincorrectly, creates the danger of death or serious personal injury.This symbol indicates information that, if ignored or appliedincorrectly, creates the possibility of death or serious personalinjury.This symbol indicates information that, if ignored or appliedincorrectly, creates the possibility of personal injury or propertydamage.•A diagonal line indicates something you should not do. The symbol shownhere indicates you should not try to take the unit apart.•A black circle indicates something you should do. The symbol shown hereindicates you should unplug the unit from the wall outlet.Precautions During UseWarningDisassembly and Modification•Never try to disassemble or modify the Handheld Terminal and its options inany way. High voltage inside creates the danger of electric shock.Abnormal Conditions•Should the Handheld Terminal and its options become hot or start to emitsmoke or a strange odor, immediately turn off the power, and contact youroriginal vendor or an authorized CASIO service provider. Continued usecreates the danger of fire and electric shock.
E-2WarningForeign Objects•Should any foreign matter get into the Handheld Terminal and its options,immediately turn off the power and contact your original vendor or anauthorized CASIO service provider. Continued use creates the danger of fireand electric shock.Dropping and Damage•Should you drop the Handheld Terminal and its options and damage them,immediately turn off the power and contact your original vendor or anauthorized CASIO service provider. Continued use creates the danger of fireand electric shock.Moisture•Though your Handheld Terminal is water splash-resistant, its BridgeSatellite Cradle and other optional peripherals are not. Keep loose metalobjects and containers filled with liquids away from your HandheldTerminal and the optional peripherals.Also, never connect or disconnect peripherals to the Handheld Terminalwhile they are wet. Water getting into the Handheld Terminal or itsperipherals creates the danger of fire and electric shock.Warning!Interference with the Operation of Other Equipment(Using Wireless Data Communication)•Keep your Handheld Terminal at least 22 centimeters (85/8") away fromanyone wearing a pacemaker. Radio waves emitted by the HandheldTerminal can affect the operation of a pacemaker.•In order to protect someone wearing a pacemaker from the risk ofunintentional interference, turn off the Handheld Terminal before boarding acrowded train or entering any other crowded area.
E-3CautionForeign Objects•Take care to ensure that metals or combustible objects are not inserted intothe openings of the Handheld Terminal and its options. Such the objectsinside of the Handheld Terminal and its options create the danger of fire andelectric shock.Location•Do not locate the Handheld Terminal and its options on a surface that isunstable or uneven. Doing so creates the danger of the Handheld Terminalfalling, which can cause personal injury.•Do not locate the Handheld Terminal and its options in an area subject tolarge amounts of humidity or dust. Doing so creates the danger of fire andelectric shock.•Do not leave the Handheld Terminal and its options for a long period in a carparked in direct sunlight.Heavy Objects•Never place heavy objects on top of the Handheld Terminal and its options.Doing so creates the danger of loss of balance and the objects falling, whichcan cause personal injury.LCD Screen•Never apply strong pressure to the screen or subject it to strong impact.Doing so can crack the screen or LCD panel glass, which can cause thedanger of personal injury.•Should the LCD panel glass break, never touch the liquid inside. Doing socan cause skin inflammation.– Should liquid from the LCD panel accidentally get into your mouth,immediately wash your mouth with water and then consult a physician.– Should liquid from the LCD panel accidentally get into your eyes or ontoyour skin, immediately rinse for at least 15 minutes with clean tap waterand then consult a physician.
E-4Optional Lithium-ion Battery PackDanger•Never allow the battery pack to become wet. Water can create the danger ofbattery pack heat emission, explosion, and fire.•Never use or leave the battery pack next to open flame, near a stove, or anyother area exposed to high heat. Doing so creates the danger of battery packheat emission, explosion, and fire.•Never use the battery pack with any device other than the HandheldTerminal. Doing so can create the danger of battery pack heat emission,explosion, and fire.•Note that the battery pack’s positive (+) and negative (–) polarities must beoriented correctly when it is loaded into battery charger or the HandheldTerminal. Connecting the battery pack with its polarities reversed creates thedanger of battery pack fluid leakage, heat emission, explosion, and fire.•Never dispose of the battery pack by incinerating it or otherwise expose it toheat. Doing so creates the danger of battery pack heat emission, explosion,and fire.•Never allow the positive (+) and negative (–) terminals of the battery pack tobecome connected (shorted) by metal. Doing so creates the danger of batterypack heat emission, explosion, and fire.•Never transport or store the battery pack together with a necklace, hair pinsor other metal objects. Doing so can short battery pack terminals, creatingthe danger of battery pack heat emission, explosion, and fire. Be sure toplace the battery pack in its case whenever transporting or storing it.•Never throw the battery pack or otherwise subject it to strong impact. Doingso creates the danger of battery pack heat emission, explosion, and fire.•Never pierce the battery pack with nails, hit it with a hammer, or step on it.Doing so can create the danger of battery pack heat emission, explosion, andfire.•Never try to take apart the battery pack or modify it in any way. Doing socreates the danger of battery pack heat emission, explosion, and fire.•Use only the specified battery charger to charge the battery pack. Use ofother type of battery charger creates the danger of battery pack heatemission, explosion, and fire.
E-5Warning•Never place the battery pack in a microwave oven or any other high-voltagedevice. Doing so creates the danger of battery pack heat emission,explosion, and fire.•Should the battery pack emit a strange odor or heat, change color or shape,or exhibit any other abnormal behavior, immediately stop using it.Continued use creates the danger of battery pack heat emission, explosion,and fire.•If the battery pack does not achieve full charge after the normal chargingtime has passed, stop charging it. Continued charging creates the danger ofbattery pack heat emission, explosion, and fire.•Should the battery pack start to leak or emit a strange odor, immediatelymove it away from any nearby flame. Leaking battery fluid is combustible,and exposure to flame creates the danger of explosion and fire.•Should fluid from the battery pack accidentally get into your eyes, do notrub them. Immediately rinse your eyes with clean tap water and thenconsult a physician immediately.Caution•Never use or leave the battery pack in an area exposed to direct sunlight, ina car parked in direct sunlight, or any other very hot area. Doing so createsthe danger of heat emission and fire, as well as deterioration of battery packperformance and shortening of its service life.•Do not use the battery pack in areas where static electricity is beinggenerated. Doing so creates the danger of battery pack heat emission,explosion, and fire.•Danger of explosion if the battery pack is incorrectly replaced.Replace only with same or equivalent type recommended by CASIO.Dispose of used batteries according to the CASIO instruction.•Should fluid from the battery pack accidentally get onto clothing or yourskin, immediately rinse it off with clean tap water. Prolonged contact withbattery pack fluid can cause skin irritation.•Keep the battery pack out of the reach of small children. Do not let smallchildren remove the battery pack from battery charger or the HandheldTerminal while it is powered on.
E-6AC Power SupplyWarning•Do not use the Handheld Terminal at a voltage other than the specifiedvoltage. Also, do not connect the Handheld Terminal to a multi-plug powerstrip. Doing so creates the danger of fire and electric shock.•Avoid conditions that can cause damage or breaks in the power cord. Do notplace heavy objects on the power cord and keep it away from sources ofheat. Any of these conditions can damage the power cord, creating thedanger of fire and electric shock.•Never modify, sharply bend, twist, or pull on the power cord. Doing socreates the danger of fire and electric shock.•When using the battery charger and Bridge Satellite Cradle, be sure to usethe respective AC adaptors (sold separately). Use of other AC adaptor modelcreates the danger of fire and electric shock.•Should the power cord become severely damaged (to the point that wires areexposed or broken), contact your original vendor or an authorized CASIOservice provider about repair or replacement. Use of a damaged electricalcord creates the danger of fire and electric shock.Caution•Keep the power cord away from stoves and other sources of extreme heat.Heat can melt the covering of the power cord and create the danger of fireand electric shock.•Never pull on the power cord when unplugging it. Doing so can damage thecord and create the danger of fire and electric shock. (Always hold the plugwhen unplugging it from the wall outlet.)•Never touch the plug while your hands are wet. Doing so can create thedanger of electric shock.•Be sure to unplug the power cord from the wall outlet before moving thebattery charger and Bridge Satellite Cradle. Failure to do so can result indamage to the power cord caused by pulling it, which creates the danger offire and electric shock.•Be sure to unplug the power cord from the wall outlet before cleaning thebattery charger and Bridge Satellite Cradle.•Be sure to turn the power off and unplug the power cord after use.•Unplug the power cord from the wall outlet whenever leaving the batterycharger and Bridge Satellite Cradle unattended for a long period.
E-7AC AdaptorCaution•The housing of the AC adaptor can become warm during normal use.•Take normal precautions against electric shock.•At least once a year, unplug the AC adaptor from the wall outlet and cleanany dust that builds up between the prongs of the plug.Dust built up between the prongs can lead to the danger of fire.Backup Copies of All Important DataCaution•Note that CASIO Computer Co., Ltd. shall not be held liable to you or anythird party for any damages or loss caused by deletion or corruption of datadue to use of the Handheld Terminal, malfunction or repair of the HandheldTerminal or its peripherals, or due to the batteries going dead.•The Handheld Terminal employs electronic memory to store data, whichmeans that memory contents can be corrupted or deleted if power isinterrupted due to the batteries going dead or incorrect battery replacementprocedures. Data cannot be recovered once it is lost or corrupted. Be sure tomake backup copies of all important data. One way to do this is to use theseparately sold Bridge Satellite Cradle to transfer data to a computer.
E-8Operating PrecautionsYour Handheld Terminal and its options are precision digital instruments. Improperoperation or rough handling can cause problems with data storage and other problems.Note and observe the following precautions to ensure proper operation.•Do not continue operating the Handheld Terminal when battery power is low.Doing so can cause data to be lost. When the battery goes low, charge it as soon aspossible.•Do not leave dead batteries in the Handheld Terminal for a long period.Dead batteries can leak, leading to malfunction and damage to the HandheldTerminal.•Use the Handheld Terminal and its options only within the specifiedtemperature range.Use outside of the specified temperature range creates the risk of malfunction.•Avoid using the Handheld Terminal and its options in areas subject to thefollowing conditions.The following conditions create the risk of damage to the Handheld Terminal.— Large amounts of static electricity— Extreme heat or extreme cold— High humidity— Sudden temperature extremes— Large amounts of dust•Use only the special stylus that comes with the Handheld Terminal to operate itstouch screen and reset button.•Do not use any tool other than the special stylus to operate the touch screen.Other tools can scratch the touch screen and lead to malfunction.•Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents toclean the Handheld Terminal.To clean the Handheld Terminal, wipe it with a dry cloth, or a cloth moistened ina weak solution of water and a mild neutral detergent. Wring all excess moisturefrom the cloth before wiping.
E-9Important•The contents of this guide are subject to change without notice.•Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any thirdparties for any losses or damages arising from the use of this guide.•This guide does not include any information about programming and downloadprocedures. See the applicable separate documentation for information about theprocedures.Warranty and After Service•Should this product ever malfunction, contact your original retailer providinginformation about the product name, the date you purchased it, and details about theproblem.
E-10GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (notapplicable to other areas).NOTICEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.FCC WARNINGChanges or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCCemission limits.Peripherals and CablesBattery Pack (DT-5023BAT)Large-capacity Battery Pack (DT-5025LBAT)AC Adaptor (AD-S42120A)Communication Card Cover (DT-892TCV)Communication Card Cover (Large size) (DT-893LTCV)CF Card Extension Uint (DT-894CFU)Cables (DT887AXA, DT888RSC, DT-380USB, SB-201)Declaration of ConformityModel Numbers: DT-X10M30U, DT-X10M30URC, DT-X10M20U, DT-X10M20URC,DT-160IOE, DT-167CHGE, DT-169CHGE, DT-5022CHGTrade Name: CASIOResponsible party: CASIO, INC.Address: 570 Mt. Pleasant Avenue, Dover, New Jersey 07801Telephone number: 973-361-5400This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.We, the undersigned.Company CASIO Europe GmbHAddress, City Bornbarch 10, D-22848 NorderstedtCountry GermanyPhone number +49(0)40-528-65-0Fax number +49(0)40-528-65-424certify and declare under our sole responsibility that the following equipments:
SAR CAUTION The equipment generates and radiates radio-frequency energy. SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65, Supplement C and guidelines established in IEEE C95.1-1991.
E-11Product description / Intended useEU/EFTA member states intended for use EU: Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, TheNetherlands, Portugal, Spain, Sweden, UnitedKingdomEFTA: Switzerland, Iceland, Lichtenstein, NorwayMember states with restrictive use NONEManufacturer CASIO COMPUTER CO., LTD.Brand CASIOType DT-X10M30E, DT-X10M30U, DT-X10M30RCDT-X10M20E, DT-X10M20RC, DT-X10M20Uare tested and found to conform with the essential requirements for protection of health and the safety ofthe user and any other persons and Electromagnetic Compatibility, as included in following standards:Standard lssue dateEN60950 1992A1, 1993A2, 1993A3, 1995A4, 1997A11, 1997EN301 489-1, 2001-09EN301 489-17 2000and are tested and found to conform with the essential radio test suites so that they effectively use thefrequency spectrum allocated to terrestrial/space radio communication and orbital resources so to as toavoid harmful interference, as included in following standards:Standard lssue dateEN300-328-1 2000-07EN300-328-2 2001-12and therefore comply with the essential requirements and provisions of the Directive 1999/5/EC of theEuropean Parliament and of the council of March 9, 1999 on Radio equipment and TelecommunicationsTerminal Equipment and the mutual recognition of their conformity and with the provisions of Annex III(Conformity Assessment procedure referred to in article 10).The technical documentation as required by the Conformity Assessment procedure is kept at the followingaddress:Company CASIO Europe GmbHAddress, City Bornbarch 10, D-22848 NorderstedtCountry GermanyPhone number +49(0)40-528-65-0Fax number +49(0)40-528-65-424Products are for distribution withinall member states of the EU.France limited to 2446.5-2483.5 Mhz Indoor use.Belgium limited to 2400-2483.5 Mhz Indoor, 2460-2483.5 Mhz Outdoor use.The Netherlands limited to 2400-2483.5 Mhz Indoor use with no license, 2451-2471.0Mhz Outdoor use with license.The information described above dates from January 2003 and may be subjected to futurechanges.
E-12Safety Precautions .........................................................................................E-1Operating Precautions ...................................................................................E-8Important .........................................................................................................E-9Before Getting Started ................................................................................. E-14Handheld Terminal System Configuration .................................................E-16Options ............................................................................................................. E-16General Guide ...............................................................................................E-19Replacing the Battery ..................................................................................E-21Replacing the Battery Pack............................................................................... E-21Attaching the Wrist Strap ............................................................................E-24Configuring Handheld Terminal Settings ................................................... E-25Calibrating Touch Screen Alignment ................................................................ E-25Adjusting Display Contrast .............................................................................. E-26Adjusting Display Brightness ........................................................................... E-26Display Auto Dimmer ....................................................................................... E-27Using the C-MOS Imager .............................................................................E-28About the Class 1 LED Label ........................................................................... E-29Performing Data Communication ...............................................................E-30IR Data Communication ................................................................................... E-30BluetoothTM Communication ............................................................................ E-31Resetting the Handheld Terminal ................................................................ E-32Performing a Full Reset (Initialization) ............................................................ E-33DT-X10 Specifications ..................................................................................E-34Contents
E-13Using the Bridge Satellite Cradle (DT-160IOE) .......................................... E-36General Guide ................................................................................................... E-36Option ............................................................................................................... E-36Connecting the AC Adaptor and Connecting to Computer .............................. E-38Configuring DIP Switch Settings ..................................................................... E-40Using Wall Mount Unit .................................................................................... E-41Connecting Multiple Bridge Satellite Cradles (DT-160IOE) ........................... E-43Bridge Satellite Cradle (DT-160IOE) Specifications ....................................... E-44Using the Cradle-type Battery Charger ...................................................... E-45General Guide ................................................................................................... E-45Option ............................................................................................................... E-45Connecting the AC Adaptor for Cradle-type Battery Charger .......................... E-47Using Wall Mount Unit .................................................................................... E-48Cradle-type Battery Charger (DT-169CHGE) Specifications .......................... E-48Using the Dual Battery Charger .................................................................. E-49General Guide ................................................................................................... E-49Option ............................................................................................................... E-49Charging a Battery Pack ................................................................................... E-51Connecting Multiple Dual Battery Chargers .................................................... E-52Dual Battery Charger (DT-5022CHG) Specifications ...................................... E-53Using PC Card (DT-X10M30E / M30U / M20E / M20U) ................................E-54Affixing a PC Card Remover ............................................................................ E-54To load a PC card .............................................................................................. E-54Using CF Card Extension Unit ....................................................................E-56Bundled Item .................................................................................................... E-56Attaching the CF Card Extension Unit ............................................................. E-56Loading a CF Card ........................................................................................... E-57CF Card Extension Unit (DT-894CFU) Specifications .................................... E-57Using Rechargeable Battery Pack ..............................................................E-58Battery Pack Specifications .............................................................................. E-58Large-capacity Battery Pack Specifications ..................................................... E-58
E-14Before Getting StartedBe sure to perform the following steps before trying to use the Handheld Terminal forthe first time.1. When unpacking, make sure that everything is included.Open the box and make sure that all the items shown here are included.Handheld Terminal StylusWrist StrapPC Card Remover (2 pcs) User's Guide (this manual)2. Charge the battery pack.Charge the separately available battery pack (DT-5023BAT or DT-5025LBAT). Youcan use the Dual Battery Charger, or the Cradle-type Battery Charger, or the BridgeSatellite Cradle to charge a battery pack.For information using these options for charging, see pages 38, 47, and 51.3. Load the battery pack into the Handheld Terminal.1Slide the two battery pack lock switches at the right and left sides to the “FREE”position, and then remove the battery pack cover.FnBL ABC DEFGHI JKL MNOPQRSBS AlphaTUV WXYZLarge-capacity battery pack
E-152Load a battery pack (DT-5023BAT) or a large-capacity battery pack (DT-5025LBAT).Take care that the battery pack is oriented correctly when you load it.3Replace the battery pack cover, and then slide the battery pack cover lock switchesto the “LOCK” position. If you load a large-capacity battery pack, affix the large-capacity battery pack cover.4. Hold down the power key for about one second to turn on the Handheld Terminal.Start up the application you want to run.Using the stylusTap: Lightly tap with the stylus once on the touch screen.Tap and Hold: Hold the tip of the stylus on the touch screen without moving it.Drag: Hold the tip of the stylus on the touch screen as you drag from one location toanother. This operation is the same as writing with a pencil on a piece of paper.FnBL ABC DEF
E-16Handheld Terminal System ConfigurationOptionsDT-X10 SeriesDT-160IOEBridge Satellite CradleRequired AC Adaptor(AD-S42120A)FnBL ABC DEFGHI JKL MNOPQRSBS AlphaTUV WXYZCradle-type Battery ChargerRequired AC Adaptor(AD-S42120A)DT-891WH RequiredScrewsRequiredScrewsDT-169CHGEWall Mount Unit
E-17DT-5023BAT(Battery Pack)DT-5025LBAT(Large-capacity Battery Pack)Dual Battery ChargerDT-5022CHGBattery PackRequired AC Adaptor(MPC-577ADP)
E-18CablesBridge Satellite Cradle Cable/RS-232C Dsub-9Pin (Female)Bridge Daisy Chain CableUSB CablePC Connection Cable (USB)DT-887AXADT-888RSCDT-380USBSB-201CF Card Extension UnitDT-894CFUBundled ItemsLarge Card CoverCommunication Card CoverDT-892TCVDT-893LTCV
E-191 Indicator 12 Indicator 23 LCD Panel/TouchScreen4 Buzzer5 Power Key6 Cursor Keys7 Programmable Key8 Numeric Keys9 Execute Key10 Function KeysIndicates the result of a barcode or other read operation.Red: Read errorGreen: Read successfulThis lamp indicates the charge status of the battery pack.Red: ChargingGreen: Charging completeShows text, operation indicators, etc. Also, operations can beperformed and text can be input using the supplied stylus.Sounds a buzzer.Hold down for about one second to turn the power on or off.These keys operate much like a computer’s cursor keys. Theycan be used to select items, scroll screen contents, etc.This key can be assigned with any function available.Use these keys to input numbers and letters.Press to register an input value and advance to the next step.These keys can be assigned any function other than barcodereading. The following are the initial default settings.F1: Deletes one character to the left.F2: Inputs a hyphen (-).F3: Inputs a period (.).F4: Toggles to switch between numbers and alphabets.General GuideLeft Front Right BackFnBL ABC DEFGHI JKL MNOPQRSBS AlphaTUV WXYZ2211112 21216 3546810 971925232417182013181415
E-2011 IR Port12 Power Contacts13 CLR Key14 Fn Key15 PC Card Slot16 USB Port17 Headset Jack18 Battery PackCover LockSwitches19 R Trigger Key20 L Trigger Key21 Wrist Strap Hole22 C-MOS Imager23 Reset Switch24 CF Card Slot UnitTerminal25 Battery PackCoverThis port is used for IR data communication with anotherHandheld Terminal or the Bridge Satellite Cradle.Contact point for supplying power from the Bridge SatelliteCradle and Cradle-type Battery Charger.Press to clear all key inputs.Press this key and then a function key or number key toconfigure settings or to run previously registered applications.For insertion of a separately available PC card.For connection to a computer or other device using a USB cable.For connection of a commercially available headset (∅2.5mm).Slide these switches to lock and release the battery pack cover.Press to perform a code read operation. This is also pressed toperform a full reset.Press to perform a code read operation.This ia also pressed tocancel a full reset.Connect the wrist strap here.Reads barcodes and 2-dimensional codes.Press to reset the Handheld Terminal.For connection of a separately available CF Card ExtensionUnit.Covers the compartment that holds the battery pack.
E-21Replacing the BatteryYour Handheld Terminal uses two types of battery: a battery pack and a memorybackup battery.The battery pack is used to power normal operations and to store data, while thememory backup battery provides the power required to maintain memory contentswhen the battery pack power is unable to supply power for some reason.The operating power is supplied by a battery pack. You can choose between a batterypack (DT-5023BAT) and a large-capacity battery pack (DT-5025LBAT).When using the CF Card Extention Unit (DT-894CF) or a PC card (such as a datacommunication card), it is recommended that you use the large-capacity battery pack(DT-5025LBAT) instead of the standard battery pack (DT-5023BAT).The backup battery is installed inside of the Handheld Terminal.This guide uses the following terms to refer to the batteries.Battery Pack: Rechargeable battery pack (DT-5023BAT or DT-5025LBAT) fornormal operations and data storageBackup Battery: Built-in battery for memory backupWhen the battery pack power goes low, immediately charge it or replace it with acharged battery pack.You can use the Dual Battery Charger, the Cradle-type Battery Charger, or the BridgeSatellite Cradle to charge a battery pack. See the sections of this guide that cover theDual Battery Charger, the Cradle-type Battery Charger, and the Bridge Satellite Cradlefor information about how to use them for charging.Replacing the Battery PackImportant!Always keep backup copies of all important data!•The main battery powers normal operation and also provides power required tomaintain memory contents, while the backup battery provides backup power tomaintain memory contents. Because of this, you should not remove the mainbattery while the backup battery is dead. Removing the battery pack while thebackup battery is dead causes data in the memory to be corrupted or lost. Notethat once data is lost it cannot be recovered. Always keep separate backup copiesof all important data.•The charge of a battery pack when you purchase it may be depleted due totesting at the factory or natural discharge during shipment and storage. Be sureto charge the battery pack before you use it.•The life of a battery pack is limited, and charging a battery pack causes it togradually lose its ability to maintain the charge. If your battery pack seems torequire charging very frequently, it probably means it is time to purchase a new one.•A fully charged backup battery can maintain memory (RAM) contents for about10 minutes, even when the main battery is removed.•The backup battery achieves a full charge in about four days when the batterypack is loaded.
E-22To replace the battery pack1. Make sure that the Handheld Terminal is turned off.If the power is on, press the power key to turn it off.2. Turn over the Handheld Terminal.3. Slide the two battery pack lock switches on both sides of the Handheld Terminal tothe “FREE” position, and then remove the battery pack cover.4. Remove the battery pack as shown in the illustration.5. Taking care to ensure it is oriented correctly, load a new battery pack into theHandheld Terminal.6. Replace the battery pack cover, and then slide the battery pack cover lock switches tothe “LOCK” position.
E-23Loading the large-capacity battery pack into the HandheldTerminalAfter loading the large-capacity battery pack, you need to use the special large-capacitybattery pack cover in place of the standard battery cover.Attachment and removal of the large-capacity battery pack cover are the same as thosefor the standard battery pack cover.Important!•When replacing the battery pack, make sure you do not leave the HandheldTerminal without a battery pack for more than about 10 minutes. Doing so cancause data in the memory to be deleted.•When replacing the battery, be sure you carefully follow the proper procedureas explained in this guide.•Never try to use other type of battery than the one that is specified for thisproduct.
E-24Attaching the Wrist StrapBe sure to attach the wrist strap and use it to protect against dropping the HandheldTerminal when carrying it around.To attach the wrist strap1. Pass the thin cord of the wrist strap through the wrist strap hole on the back of theHandheld Terminal.2. Pass the other end of the strap (the part where you insert your wrist) through the loopformed by the thin cord.Important!Do not swing the Handheld Terminal around holding the wrist strap.
E-25Configuring Handheld Terminal SettingsCalibrating Touch Screen AlignmentWhenever you feel that touch screen response is poor or that the operations beingexecuted do not match the location you are tapping on the touch screen, perform eitherof the following operations to calibrate the alignment of the touch screen.•On the touch screen, tap the “Start” button and then tap “Settings” on the menu thatappears. On the Control Panel, tap “Stylus”, tap “Calibration”, and then tap“Recalibrate”.•You can also press the key, followed by the “4” key.* The condition in which the “Fn” key is pressed, is called the function mode. Duringthe function mode, “F” is indicated in the task tray in the lower right corner of thescreen.This displays a screen like the one shown below.Press the stylus against the target (+ mark) as indicated on the screen. The screenshown below appears after you press the stylus against the target at five differentlocations.Press the Execute key or tap anywhere on the touch screen.
E-26Adjusting Display ContrastPerform the following steps to adjust display contrast to make display colors more vividand easier to see.1. On the touch screen, tap the “Start” button and then tap “Settings” on the menu thatappears.2. On the Control Panel, tap “Contrast & Brightness”.3. On the dialog box that appears, tap the [Contrast] tab.4. Next, follow the instructions that appear on the display to adjust contrast.•You can also press the function key followed by the “2” key to perform adjustmentfor less contrast or the “3” key for more contrast. In order to continue to perform newadjustments of the contrast, please press the “Fn” key followed by the “2” or “3” keyonce again.* The condition in which the “Fn” key is pressed, is called the function mode. Duringthe function mode, “F” is indicated in the task tray in the lower right corner of thescreen.Adjusting Display BrightnessYou can use the following procedure to adjust screen brightness to make it easier toread under different lighting conditions.1. On the touch screen, tap the “Start” button and then tap “Settings” on the menu thatappears.2. On the Control Panel, tap “Contrast & Brightness”.3. On the dialog box that appears, tap the [Brightness] tab.4. Next, follow the instructions that appear on the display to adjust brightness.•You can also press the function key followed by the “5” key to perform adjustment ofthe brightness for a lighter display or the “6” key for a darker display. In order tocontinue to perform new adjustments of the display brightness, please press the “Fn”key followed by the “5” or “6” key once again.* The condition in which the “Fn” key is pressed, is called the function mode. Duringthe function mode, “F” is indicated in the task tray in the lower right corner of thescreen.Important!•If you use your Handheld Terminal in a location where it is hot, it automaticallydims the screen to protect against damage.
E-27Display Auto DimmerThe display auto dimmer automatically lowers display brightness if you do not performany operation for a specific amount of time. This helps to conserve battery power.You can use the following procedure to specify the amount of that should be allowed topass before auto dimming is performed.1. On the touch screen, tap the “Start” button and then tap “Settings” on the menu thatappears.2. On the Control Panel, tap “Contrast & Brightness”.3. On the dialog box that appears, tap the [Backlight] tab.4. Next, follow the instructions that appear on the display to specify the auto dimmertime.
E-28Using the C-MOS Imager1. Turn on the Handheld Terminal, position its C-MOS Imager reader port near thebarcode or 2-dimensional code, and then press the Trigger Key (R or L).2-dimensionalcodeGreen lightRed light2. The Handheld Terminal LED emits light and reads the code.Indicator 1 (read operation indicator lamp) lights in green when the reading is successful.Barcode and 2-dimensional code Reading GuideWhen you press the Trigger key (R or L), LEDs in the Handheld Terminal emit greenand red lights. Align the green light with the center of the barcode or 2-dimensionalcode you are trying to read. Take particular care aligning the light when there areother barcodes nearby.When reading a large code, adjust the position of the Handheld Terminal so that theentire code is enclosed within the red light.Important!•If you have problem not properly reading a code, change the angle and/or thedistance between the label and the Handheld Terminal and try reading the codeagain.•A code can be read from a distance of 65mm to 600mm (25/8" to 1'115/8"), and a 2-dimensional code can be read from a distance of 60mm to 285mm (233333⁄⁄⁄⁄⁄88888" to 1111111⁄⁄⁄⁄⁄44444").The actual reading distance depends on the code type and code resolution.•For smaller codes, move the Handheld Terminal closer to the code.•To read a large code, move the Handheld Terminal further away from the code.•Note that a special reader application is required to read barcodes and 2-dimensionalcodes.•The DT-X10M30E/M30U/M30RC/M30URC supports reading of 2-dimensionalcodes.•Fingerprints, dust, dirt, or other foreign matter on the C-MOS Imager readerport can cause abnormal reading. Should the code reader port become dirty,wipe it clean with a soft, dry cloth.
E-29About the Class 1 LED Label•This label identifies the Handheld Terminal as a Class 1 LED product underIEC60825-1: 1997.
E-30Performing Data CommunicationIR Data CommunicationIR data communication can be used to transfer data between two Handheld Terminals.When performing IR data communication, orient the IR ports of both HandheldTerminals so they are pointing directly at each other.The ports can be in direct contact with each other, or they can be separated by up to 1meter (3'31⁄2") (up to 25cm (97⁄8") for 4Mbps data communication).Important!•A high-sensitivity communication element is used during IR datacommunication.•In order to ensure successful communication, avoid using cellular phones orother devices that emit radio wave in the area where you are performing IR datacommunication.•If you need to use such a device, move away from the communicating HandheldTerminals. In case of a cellular phone, keep it at least 30cm (1177777⁄⁄⁄⁄⁄88888") away.
E-31BluetoothTM CommunicationBluetoothTM protocol can also be used to transfer data between two HandheldTerminals.With BluetoothTM the two Handheld Terminals should be located within about threemeters (9'103⁄8") from each other, as long as there is nothing blocking the path betweenthem.Important!Observe the following precautions to help ensure that data communication issuccessful.•Make sure the BluetoothTM devices are located within three meters (9'1033333⁄⁄⁄⁄⁄88888") ofeach other. Surroundings (obstacles) may require a shorter distance between thetwo devices.•Make sure there is at least two meters (6' 7") between the communicatingdevices any electrical appliance, audio-visual equipment, office equipment,digital cordless telephones, facsimile machines, etc. Particular care is required inthe case of a microwave oven. Allow at least three meters (9'1033333⁄⁄⁄⁄⁄88888") between thecommunicating devices and a microwave oven. Turning on such a device when itis nearby can interfere with proper data communication or cause interferencewith TV and radio reception. Images produced by certain UHF and broadcastsatellite channels may become blurry.•Normal data communication may not be possible in an area near a broadcasttransmitter or wireless transmitter. If this happens, move to a different location.Normal data communication may not be possible in areas exposed to strongradio waves.•RF Wireless LAN InterferenceBecause BluetoothTM and RF wireless LAN use the same frequency band(2.4GHz), radio interference can occur if there is a wireless LAN device nearby.This can result in lower data communication speeds, or even make it impossibleto establish a connection. If this happens, try the following countermeasures.•Move at least 10 meters (32'103⁄4") away from the wireless LAN device.•If you cannot keep the distance at least 10 meters (32'103⁄4") or more between theHandheld Terminal and a wireless LAN device, turn off the power of either theHandheld terminal or the wireless LAN device.•Set the RF wireless LAN mode of the Handheld Terminal to off.
E-32Resetting the Handheld TerminalResetting the Handheld Terminal is the same as restarting a computer. Performing areset causes all unsaved inputs and edits to be lost, but data that is already stored in thememory as well as all settings should be unaffected.Use reset to restore normal operation whenever the Handheld Terminal operatesabnormally due to misoperation or some other reason.Use the stylus to press the reset switch on the back of the Handheld Terminal.This starts the reset operation.If reset does not find a memory problemThe Handheld Terminal restarts, and normal operation is restored.If reset finds a memory problemA message like the one shown below appears on the display when the reset operationdiscovers a memory problem.When this message appears, press the R Trigger key to continue with the resetoperation. Note, however, that reset may not be successful depending on the conditionof the memory. In this case, perform the full reset operation described on the next page.Memory Corruption WarningA problem with memory contents has been found. Press [R trigger key] to continue with the reset procedure which restoresnormal system operation.Note that if the system determines that user memory cannot be repaired it will delete all user data currently in memory.See the User's Guide for details about initializing memory.FnR trigger keyL trigger key
E-33Performing a Full Reset (Initialization)Performing a full reset initializes memory. This means that all data stored in thememory (RAM) is deleted and all the settings are returned to their initial factorydefaults.Perform a full reset whenever any one of the following conditions exists.•When you want to delete all memory contents and return the settings to their initialfactory defaults.•When you are no longer able to use the Handheld Terminal because you forgot yourpassword.•When the Handheld Terminal does not operate normally due to a memory problem.•When the message “A problem with memory contents has been found. ...” appears.To perform a full resetImportant!Performing a full reset deletes all data currently stored in the memory (RAM). Ifpossible, backup data of the Handheld Terminal to a computer, Flash Memory, amemory card, or some other medium before performing a full reset.1. While the Handheld Terminal is turned on, hold down the power key and push downthe reset button for about one second, until the message shown below appears on thedisplay.•To cancel the reset operation, press the L Trigger key instead of the R Trigger key.2. Press the right Trigger key. This causes the message shown below to appear.•To cancel the reset operation, press the L Trigger key instead of the R Trigger key.3. Press the R Trigger key again.•This performs the full reset and deletes all data in the memory (RAM).•Press the R Trigger key again. This will cause the startup screen to appear.Memory All Clear WarningProceeding with this operation initializes memory.Press [R trigger key] to proceedor [L trigger key] to cancel.Memory All Clear WarningProceeding with this operation deletes all data stored in memory.Press [R trigger key] to proceedor [L trigger key] to cancel.FnR trigger keyL trigger keyFnR trigger keyL trigger key
E-34DT-X10 SpecificationsModel: DT-X10M30E, DT-X10M30U, DT-X10M30RC,DT-X10M30URC, DT-X10M20E, DT-X10M20U,DT-X10M20RC, DT-X10M20URCCPU: Intel® PXA255 Application Processor (300MHz max.)Memory: 32MB RAM; 32MB Flash ROM (FlashFX built in)OS: Microsoft® Windows® CE.NET operating system, English VersionDisplay: 3.5-inch, 240 × 320-dot 2-Way TFT color LCDC MOS Imager:Code Types Supported (DT-X10M20E/M20RC/M20U/M20URC):EAN (JAN),UPC, Codabar (NW-7), CODE 39, CODE 93, CODE 128(EAN128, ISBT), CODE11, Interleaved 2 of 5 (ITF), RSS, MSI/Pressy,IATACode Types Supported (DT-X10M30E/M30U/M30RC/M30URC):Barcode: EAN (JAN), UPC, Codabar (NW-7), CODE 39, CODE 93, CODE128(EAN128, ISBT), CODE11, Interleaved 2 of 5 (ITF), RSS, MSI/Pressy,IATA2-dimensional code:Data Matrix, Maxi Code, QR Code, PDF417, Micro PDF, CODE 49,Aztec, Aztec Mesa, Composite, Codablack, Postal Codes**Postnet, BPO4 State Code (British Post Office), Canadian 4 State Code,Australian 4 State Code, Japanese Post, Planet, Dutch PostOCR: OCR A/BOCR US MoneyReading distance:Barcode: 65mm to 600mm (25/8" to 1'115/8")2-dimensional code: 60mm to 285mm (23/8" to 111/4")Serial Port: Interface: USB slave (Mini B5 Pin)Transfer Rate: 12Mbps (max.)IR Port:Interface: IrDA Ver. 1.1 StandardSynchronization: Asynchronous, frame synchronizationTransfer Rate: Up to 4Mbps (max.)Card Slot (DT-X10M30E/M30U/M20E/M20U):PC Card Type I/Type II (3.3V/5.0V)BluetoothTM Communication:Protocol: BluetoothTM Specification Ver.1.1Range: Approximately 3 m (9'103⁄8")(depends onradio wave conditions and environment)Output: 3dBm max. (PowerClass2)Wireless Communication (DT-X10M30RC/M30URC/M20RC/M20URC):Type: Wireless LANModulation: Direct Sequence Spread SpectrumRadio Frequency: 2400 to 2483.5MHzData Rate: 11Mbps maximumRange:Indoors: 50m (164'55/8"), Outdoors: 150m (164'55/8")(Actual range depends on local surroundings.)Channels: 11 (DT-X10M30URC/M20URC);13 (DT-X10M30RC/M20RC)Simultaneous Channels: 3Technical Standard: IEEE 802.11bOther Functions: Multiple access point roaming
E-35Earphone Jack: ∅2.5mm (1/8") (3-pole)Supports headset.Power Requirements:Power Supply: DT-5023BAT Battery PackDT-5025LBAT Large-capacity Battery PackMemory Backup: Rechargeable Lithium Battery (Built-in)Power Consumption: 2.5A DC, 3.7/5VBattery Life:Main Battery: DT-5023BAT6.5 hours (DT-X10M30E/M30U/M20E/M20U*)3.5 hours (DT-X10M30RC/M30URC/M20RC/M20URC**)DT-5025LBAT13 hours (DT-X10M30E/M30U/M20E/M20U*)7 hours (DT-X10M30RC/M30URC/M20RC/M20URC**)* Stand By (20):Operation (1):Scan (1)** Stand By (6.5):Wireless communication(2):Scan (1.5)Memory backup: Data Protection (RAM): 10 minutes (when nopower is being supplied by the installed batterypack)Clock: 2 weeks (when no power is supplied bythe battery pack)Operating Temperature:–20°C to 50°C (–4°F to 122°F)Operating Humidity:10% to 80% RH (non-condensation)Drop Durability: 1.2 m (3'113/8")Dust and Water Resistance:IEC529, IP54 Standard *When all connctors and covers are closed.Dimensions:Approximately 77(W) × 220(D) × 47(H) mm (3"W × 85⁄8"D × 17⁄8"H)Weight: Approximately 350g (12.3oz) (DT-X10M30E/M30U/M20E/M20U)Approximately 400g (14.1oz) (DT-X10M30RC/M30URC/M20RC/M20URC)
E-36BottomFrontRightBackTop172 3 458111214136109Using the Bridge Satellite Cradle (DT-160IOE)The optionally available Bridge Satellite Cradle (DT-160IOE) makes it possible totransfer system data and file data between the Handheld Terminal and a computerover an RS-232C connection or USB connection. You can also use the BridgeSatellite Cradle to charge the battery pack installed on the Handheld Terminal.An optionally available wall mount unit (DT-891WH) lets you mount the BridgeSatellite Cradle on a wall.General GuideRequired AC Adaptor(AD-S42120A)Option
E-371 USB Port2 RS-232C Port3 RS-422C Port4 AC Adaptor Jack5 Wall Mount UnitFastening Plate6 Terminal DetectSwitch7 IR Port8 Power Contacts9 Power IndicatorLamp10 CommunicationIndicator Lamp11 System StatusIndicator Lamp12 Power Switch13 Desktop Unit14 DIP SwitchesThis port accepts connection of a USB cable for connection to acomputer for transfer of system data and file data. Use of theUSB port requires installation of a special driver on the PC.This port accepts connection of an RS-232C cable forconnection to a computer for transfer of system data and filedata. Use of the RS-232C port requires installation of a specialdriver on the PC.This port is used when connecting to another Bridge SatelliteCradle.Connect the AC adaptor here.The holes in this plate accept screws that secure the wall mountunit in place.This switch detects when the Handheld Terminal is not seatedcorrectly on the Bridge Satellite Cradle.This port transfers data with the Handheld Terminal IR port non-contact data communication.Power is supplied to the Handheld Terminal via these contacts.This lamp indicates the mounting status of the HandheldTerminal.Off: Power offGreen: Power on, Handheld Terminal mounted correctlyRed: Power on, Handheld Terminal not mountedThis lamp shows when the Handheld Terminal is performingdata communication.Off: No data communication being performedGreen flashing: Data communication in progressRed: Problem with a connection between two Bridge SatelliteCradlesThis lamp indicates whether the system is operating normally.Regardless of whether or not a Handheld Terminal is mountedthis lamp indicates the system status and whether or not acommunication operation with the system can be performed.Off: System is not operating.Green: System is operating.Turns the power on and off.This is the base when using the Bridge Satellite Cradle in adesktop configuration. Remove the desktop unit in the case of awall-mount configuration.Use these switches to configure the Bridge Satellite Cradle asrequired.
E-38POWER DATA LINEConnecting the AC Adaptor and Connecting to ComputerUse the AC adaptor available as option for the Bridge Satellite Cradle to supply thepower to it. Always make sure that the power is being supplied to the Bridge SatelliteCradle by the AC adaptor before performing any type of data communication operationwith the Handheld Terminal. The Handheld Terminal draws the power via the BridgeSatellite Cradle during data communication.1. After making sure that the Bridge Satellite Cradle power switch is turned off, plugthe AC adaptor into the AC adaptor jack on the back.2. Next, plug the AC adaptor into a power outlet.3. After making sure that the Bridge Satellite Cradle and your computer are both turnedoff, remove the cap from the Bridge Satellite Cradle connection ports, and thenperform one of the following steps to connect to your computer.Be sure to keep the Bridge Satellite Cradle connection ports covered whenever youare not using them.RS-232C Connection•Connect an RS-232C cable (DT-887AXA) to the RS-232C port of the BridgeSatellite Cradle. Connect the other end to your computer’s RS-232C port.USB Connection•Connect a USB cable (DT-380USB) to the USB port of the Bridge Satellite Cradle.Connect the other end to your computer’s USB port.When using theRS-232C portPower contactsPower switch (ON)Communication Indicator LampPower switch (OFF)Power Indicator Lamp System Status Indicator Lamp
E-394. Turn on the power. This causes the Bridge Satellite Cradle power indicator lamp tolight in red.5. Making sure that their two IR ports come into contact with each other, place theHandheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge SatelliteCradle power indicator lamp to light in green.•If the system is operating normally and data communication is enabled, the systemstatus indicator lamp lights in green.•The communication indicator lamp flashes in green when data communication starts.Important!•A high-sensitivity communication element is used during IR datacommunication.In order to ensure successful communication, avoid using cellular phones orother devices that emit radio wave in the area where you are performing IR datacommunication.If you need to use such a device, move away from the communicating HandheldTerminals. In case of a cellular phone, keep it at least 30cm (1177777⁄⁄⁄⁄⁄88888") away.•Take care to avoid allowing the Bridge Satellite Cradle power contacts tobecome connected to each other, which creates a short.Shorting the power contacts can damage the Bridge Satellite Cradle.
E-40Configuring DIP Switch SettingsA bank of DIP switches is located under the side cover of the Bridge Satellite Cradle.You can change the on/off settings of the DIP switches to configure the Bridge SatelliteCradle to meet your needs. After you change DIP switch settings, the new settings donot go into effect until you turn the Bridge Satellite Cradle off and then back on again.12345678Not used (Always off)Not used (Always off)Host Computer InterfaceSettingRS-232CUSB6OFFONSettingIntermediate UnitDaisy Chain Disabled/Termination5OFFONSettingHost ComputerDaisy Chain3OFFON4OFFOFFDaisy ChainConnection TypeSetting115,200bps*Initial factory default setting1ON2OFFBridge Satellite Cradle Data Rate****Important!Note that other DIP settings are used for testing and inspection purposes. Becauseof this, you should never use any DIP settings other than those described above.
E-41Using Wall Mount UnitThe following procedure explains how to use the optional wall mount unit (DT-891WH) to configure the Bridge Satellite Cradle for a wall-mounted configuration.1. Remove the screws on the bottom of the Bridge Satellite Cradle, and remove thedesktop unit.2.Affix the wall mount unit to the bottom of the Bridge Satellite Cradle, and secure it inplace with the wall mount unit screws.3. Drive one of the provided screws into the wall at the location where the upper hole ofthe wall mount unit to be when you mount the unit on the wall.Do not drive the screw into the wall all the way. Keep a space of about 2mm (1⁄8")between the head of the screw and the wall surface.4. Hook the upper wall mount unit hole onto the upper screw.ScrewsScrews2mm (1⁄8")
E-425. Drive the other screw into the wall at the location where the lower hole is located.6. Drive the upper screw and lower screw into the wall the rest of the way.To remove the Bridge Satellite Cradle from the wall1. Loosen the upper screw and lower screw.2. Raise the Bridge Satellite Cradle and remove it from the screws.Important!•While the Bridge Satellite Cradle is mounted on a wall, be sure to check the wallscrews periodically for looseness. Tighten them as required.•Note use of the RS-232C cable is not supported by the wall-mountedconfiguration. Connect using a USB cable or daisy chain cable.
E-43Connecting Multiple Bridge Satellite Cradles (DT-160IOE)Use the modular cable for the connections.You can daisy chain multiple Bridge Satellite Cradles by connecting the C-OUT port ofthe first unit that is the nearest to the host computer to the C-IN port of the next unitthat is sitting to the first unit with DT-888RSC cable (Daisy chain connection cable) asshown in the figure below.To host computerDaisy chain connection cables(DT-888RSC)RS-232C cable or USB cableImportant!You can use optional daisy chain connection cables (DT-888RSC) to link up toeight Bridge Satellite Cradles.
E-44Bridge Satellite Cradle (DT-160IOE) Specifications1. IR Data CommunicationInterface: IR interfaceProtocol: IrDA Ver. 1.1 StandardSynchronization: Asynchronous, frame synchronizationTransfer Rate: 9,600, 115,200, 4Mbps(4Mbps is possible during a USB connection with the hostcomputer only.)2. USBProtocol: USB Ver1.1Transfer Rate: 12Mbps (max.)3. RS-232CProtocol: Full duplexSynchronization: AsynchronousTransfer Rate: 115,200bps4. RS-422Protocol: Full duplexSynchronization: AsynchronousTransfer Rate: 115,200bps5. ChargingCharging System: Fixed-voltage (with current limiter)Charge Time: Approximately 2.5 hours (standard battery pack)Approximately 5.0 hours (large-capacity battery pack)6. Power SupplyPower Requirement: AC adaptor (AD-S42120A)Power Consumption: DC12V approximately 1600mAOutput Handheld Terminal: DC5V 2500mA (max.)7. AC AdaptorModel: AD-S42120AInput: 100V to 240V AC 50/60HzOutput: 12V DC 3500mA8. Dimensions and WeightDimensions:Desktop: Approximately 110(W) × 139(D) × 129(H) mm(43⁄8"W × 51⁄2"D × 51⁄8"H)Wall Mount: Approximately 110(W) × 148(D) × 153(H) mm(43⁄8"W × 57⁄8"D × 6"H)Weight: Desktop: Approximately 490g (17.3oz)Wall Mount: Approximately 650g (22.9oz)8. Operating EnvironmentTemperature: 0°C to 40°C (32°F to 104°F)Humidity: 30% to 80% RH (non-condensation)
E-45Using the Cradle-type Battery ChargerThe optionally available Cradle-type Battery Charger (DT-169CHGE) lets you chargethe Handheld Terminal’s battery simply by placing the Handheld Terminal onto thecharger.An optional wall mount unit lets you mount the Cradle-type Battery Charger on a wall.General GuideBackTopFrontRight Bottom135426OptionRequired AC Adaptor(AD-S42120A)
E-461 AC Adaptor Jack2 Wall Mount UnitFastening Plate3 Power Contacts4 Power IndicatorLamp5 Power Switch6 Desktop UnitConnect the AC adaptor here.The holes in this plate accept screws that secure the wall mountunit in place.Power is supplied to the Handheld Terminal via these contacts.This lamp indicates the power status and the connection statusof the Handheld Terminal.Off: Power offRed: Power on, Handheld Terminal not mountedGreen: Power on, Handheld Terminal mounted correctlyTurns the power on and off.This is the base when using the Bridge Satellite Cradle in adesktop configuration. Remove the desktop unit in the case of awall-mount configuration.
E-47Connecting the AC Adaptor for Cradle-type Battery ChargerUse the special AC adaptor for the Cradle-type Battery Charger to connect to a walloutlet.1. After making sure that the Cradle-type Battery Charger power switch is turned off,plug the AC adaptor into the AC adaptor jack on the back of the charger.2. Next, plug the AC adaptor into a power outlet.3. Turn on the power. This causes the Cradle-type Battery Charger power indicator lampto light in red.POWER4. Making sure that their power contacts come into contact with each other, place theHandheld Terminal onto the Cradle-type Battery Charger. This causes the Cradle-type Battery Charger power indicator lamp to light in green.The indicator on the Handheld Terminal changes from red to green when charging iscomplete.Important !Take care to avoid allowing the Cradle-type Battery Charger power contacts tobecome connected to each other, which creates a short.Shorting the power contacts can damage the Cradle-type Battery Charger.Power switch (OFF)Power contactsPower switch (ON)Power Indicator Lamp
E-48Using Wall Mount UnitTo wall mount the Cradle-type Battery Charger, use the same procedure as thatdescribed for the Bridge Satellite Cradle (DT-160IOE) on page 41.Cradle-type Battery Charger (DT-169CHGE) Specifications1. ChargingCharging System: Fixed-voltage (with current limiter)Charge Time: Approximately 2.5 hours (standard battery pack)Approximately 5.0 hours (large-capacity battery pack)2. Power SupplyPower Requirement: AC adaptor (AD-S42120A)Power Consumption: 12V DC, approximately 1,400mAOutput Handheld Terminal: 5V DC 2500mA (max.)3. AC AdaptorModel: AD-S42120AInput: 100V to 240V AC 50/60HzOutput: 12V DC 3500mA4. Dimensions and WeightDimensions: Desktop: Approximately 110(W) X 139(D) X 129(H) mm(43⁄8"W × 51⁄2"D × 51⁄8"H)Wall Mount: Approximately 110(W) × 148(D) × 153(H) mm(43⁄8"W × 57⁄8"D × 6"H)Weight: Desktop: Approximately 470g (16.6oz)Wall Mount: Approximately 630g (22.2oz)5. Operating EnvironmentTemperature: 0°C to 40°C (32°F to 104°F)Humidity: 30% to 80% RH (non-condensation)
E-49Using the Dual Battery ChargerThe optionally available Dual Battery Charger (DT-5022CHG) lets you charge twobattery packs at the same time.General GuideFront BackTop11444432 33Bundled ItemsConnection Bracket2 screwsOptionAC AdaptorMPC-577ADP
E-501 Charge IndicatorLamp2 AC Adaptor Jack3 Dual BatteryChargerConnection Port4 ConnectionBracketAttachment HolesThis lamp indicates the charge status of the battery pack(s).Off: Not chargingRed: ChargingRed Flashing: Battery pack problemGreen: Charging completeConnect the AC adaptor here.Use this port to connect multiple Dual Battery Chargers to eachother.The connection bracket attaches here when you connect multipleDual Battery Chargers to each other.Important!Each Dual Battery Charger comes with one connection bracket.Since only one connection bracket is required when you connect two Dual BatteryChargers, you will always have one left over.Simply keep the other connection bracket on hand as an extra, in case you everneed it.
E-51Charging a Battery Pack1. Plug the optional AC adaptor into the AC adaptor jack of the Dual Battery Charger.2. Plug the other end of the AC adaptor into a wall outlet.3.Taking care that the battery pack is oriented correctly, insert it into the Dual BatteryCharger.This causes the Charge Indicator Lamp to light in red, indicating that charging hasstarted.Charge Indicator LampOff: Not chargingRed: ChargingRed Flashing: Battery pack problemGreen: Charging complete
E-52Connecting Multiple Dual Battery ChargersYou can connect up to three Dual Battery Chargers. Doing so makes it possible tosupply power to all the Dual Battery Chargers using the AC adaptor.1. As shown in the illustrations below, remove the connector covers of the Dual BatteryChargers you want to connect to each other.2. Connect the two Dual Battery Chargers as shown below.3. Turn over the connected Dual Battery Chargers and attach a connection bracket,securing it in place with screws.You can repeat the above steps to connect up to three Dual Battery Chargers.Connector cover
E-53Dual Battery Charger (DT-5022CHG) Specifications1. Model:DT-5022CHG2. Charging:Charging System: Fixed-voltage (with current limiter)Charge Time: Approximately 2.5 hours for one battery packApproximately 5.0 hours for one large-capacity battery packCharging Two Battery PacksApproximately 5.0 hours for two battery packs (DT-5023BAT×2)Approximately 10 hours for two large-capacity battery packs(DT-5025LBAT×2)3. Power Supply:Power Requirement:AC adaptor MPC-577ADPConsumption Current:Approximately 650mA4. Operating Environment:Temperature:0°C to 40°C (32°F to 104°F)Humidity:30% to 80% RH (non-condensation)5. Dimensions and Weight:Dimensions:Approximately 110(W) × 100(D) × 49(H) mm (43⁄8"W × 4"D × 17⁄8"H)Weight:Approximately 154g (5.4oz)
E-54Using PC Card (DT-X10M30E / M30U / M20E / M20U)Your Handheld Terminal supports use of PC cards (PCMCIA card, compact flash cardwith a CF card adaptor). Use the following procedure to load and remove PC cards.Affixing a PC Card RemoverOnce loaded, the PC card may be difficult to remove from the PC card slot.Affixing a PC card remover (a piece of tape) to the PC card before you load it makes iteasier to pull the card out of the slot later.Important!When you use a compact flash card, always affix the PC card remover to the PCcard adaptor, not on the compact flash card itself whenever loading into theHandheld Terminal. If you affix the tape to the compact flash card instead of theadaptor, pulling the remover may end up pulling out the compact flash card only,and make it impossible to remove the adaptor.To load a PC card1. Carefully lift up either end of the rubber PC card slot cover, and remove the fourscrews that secure it in place.Important!Be gentle when lifting up the ends of the PC card slot cover rubber to expose thescrews. Pulling on the rubber or other rough handling can cause the rubber tobreak.•The PC card slot cover will not fit properly while a data communication card or someother large-size card is installed in the slot. In this case, use a separately availableLarge Card Cover (DT-892CV, DT-893LTCV).PC Card RemoverDirection to insert
E-552. Remove the PC card slot cover.3. Slide a PC card with a remover tape affixed into the Handheld Terminal.Make sure that the top surface of the card is facing in the same direction as theHandheld Terminal display. You will not be able to insert the card all the way into theslot if it is not oriented correctly.Be sure to fold the tab part of the remover tape affixed to the card so it is notdamaged when you replace the card compartment cover.4. Replace the PC card compartment cover, and secure it in place with its screws.Important!If you cannot eject a PC card from the slot for some reason, carefully use a flatblade screwdriver to pull out the lever located at the right of the card, as shown inthe illustration. While pulling out on the tab, pull the card from the slot. Never tryto pull on the tab with your fingernail. Doing so can cause your fingernail to break.
E-56Using CF Card Extension UnitThe CF Card Extension Unit (DT-894CFU) supports use of Compact flash (CF) Type Icards and Type II cards (3.3/5.0V).Use the procedure below to load and remove CF cards.Important!•Installing some cards will make it impossible to close the card slot cover. Whenthat happens, you can either use the Large Card Cover or you can use theHandheld Terminal and CF card without a card slot cover. Keep the card slotcover in a safe place where you will not lose it. Note that the Handheld Terminalis not water resistant while its card slot cover is removed . Exercise special carewhen using the Handheld Terminal without its card slot cover attached.•When using a CF storage card, be sure to close the card slot cover.Attaching the CF Card Extension UnitAttach the CF Card Extension Unit to the back of the Handheld Terminal. The CF CardExtension Unit connector is located under a protective cover.1. Loosen the screws that secure the cover in place, and then remove the cover.2. Attach the CF Card Extension Unit, and secure it in place with its screws.DT-894CFU Large Card CoverBundled ItemUse this cover whenyou have a datacommunication card orother large cardinstalled in the cardslot.
E-57Loading a CF Card1. Wipe the surfaces of the card so it is free of any dirt, dust, or oil.2.Remove the screws that secure CF Extension Unit in place, and then remove the card slot cover.3. Making sure that the top surface of the card is facing in the same direction as theHandheld Terminal display, slide the card into the slot.You will not be able to insert the card all the way into the slot if it is not oriented correctly.4. Replace the CF card compartment cover, and secure it in place with its screws.When removing a card, hook your finger on the rim of the card and pull.CF Card Extension Unit (DT-894CFU) SpecificationsCard Slot: Compact Flash Card Type I/Type II (3.3V/5.0V)Dimensions: Using Standard Card Cover: Approximately70(W) × 78(D) × 13(H) mm (23⁄4"W × 31⁄8"D × 1⁄2"H)Using Large Card Cover: Approximately85(W) × 78(D) × 13(H) mm (33⁄8"W × 31⁄8"D × 1⁄2"H)Weight: Using Standard Card Cover: Approximately 40g (1.4oz)Using Large Card Cover: Approximately 45g (1.6oz)
E-58Using Rechargeable Battery PackYour Handheld Terminal supports use of two battery pack types of different capacity.You can select the one that best suits your needs in terms of operating time, the type ofoptions you need to use, etc.When using the large-capacity battery pack, you need to use the special large-capacitybattery pack cover that comes with the battery pack (DT-5025LBAT).Important!Store a battery pack in its special soft case whenever you are not using it.Battery Pack SpecificationsModel:DT-5023BATRated Capacitance:1550mAhRated Voltage:3.7VDimensions:Approximately 37(W) × 57(D) × 13(H) mm (11⁄2"W × 21⁄4"D × 1⁄2"H)Weight:Approximately 45g (1.6oz)Bundled Item:Soft caseLarge-capacity Battery Pack SpecificationsModel:DT-5025LBATRated Capacitance:3400mAhRated Voltage:3.7VDimensions:Approximately 37(W) × 57(D) × 24(H) mm (11⁄2"W × 21⁄4"D × 1"H)Weight:Approximately 87g (3.1oz)Bundled Item:Soft case
CASIO COMPUTER CO., LTD.6-2, Hon-machi 1-chomeShibuya-ku, Tokyo 151-8543, JapanPrinted on recycled paper.PN410369-002MO0302-005101A Printed in Japan

Navigation menu