Casambi Technologies XPRESS Wireless Casambi Controller User Manual User Guide

Casambi Technologies Oy Wireless Casambi Controller User Guide

User Guide

Preset 1downDimupDimMulti-purposebutton 1Multi-purposebutton 2Preset 2Preset 3Preset 41 23 4Pull the tab o Install wall mount
Your brand newXpresswireless switchQuick GuideOpen Casambi App Press any button and take into use
Compliance StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radiation Exposure Statement for FCCThis device has been designed and complies with the safety requirements for portable (<20cm) RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in the RF exposure analysis. Installers must ensure that this device must not be co-located or operated in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmit-ter product procedures.WarningChanges or modications not expressly approved by Casambi Technologies Oy could void the user’s authority to operate the equipment.FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-sion reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Radiation Exposure Statement for CanadaThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:(1) This device may not cause interference(2) This device must accept any interference, including interference that may cause undesired operation of the device.This device complies with the safety requirements for RF exposure in accord-ance with RSS-102 Issue 5 for portable use conditions.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux condi-tions suivantes:(1) l’appareil ne doit pas produire de brouillage;(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Le présent appareil est conforme aux limites d’exposition aux RF conformément au norme CNR-102 émission 5 pour conditions d’utilisation portable.Copyright Casambi Technologies Oy 2018Bertel Jungin aukio 1 E, 02600 Espoo, Finland

Navigation menu