Carpoint V4050 Portable GPS Navigation Device User Manual S3BV4050 Manual rev01

Carpoint Co., Ltd. Portable GPS Navigation Device S3BV4050 Manual rev01

User manual

VV44005500OOwwnneerr’’ssMMaannuuaall
Thank you for choosing the XROAD V4050 Navigation system. This model includes: 9 4.3” Wide[16:9] TFT Touch Screen LCD with Ultra-bright 480x272 resolution in 16.7 million colors 9 400MHz Samsung CPU to ensure powerful performance 9 Built-in Bluetooth Hands-Free Calling 9 Premium multimedia functions supporting music (MP3), video (AVI), picture (JPEG) and game 9 Internal Enhanced GPS receiver (SIRFIII / SIRFstarIII) for a quick start 9 Powerful Lithium-Polymer 2100mAH Battery9 Microsoft WinCE Core Version 5.09 2.0 GB SD card preloaded with U.S. and Canada map dataXROAD DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE, OR THAT MAY VIOLATE THE LAWWARNING: DANGER OF ACCIDENTWhen you use XROAD navigation in your vehicle, it is your sole responsibility to use the device in a manner that will not cause accidents, personal injury or property damage, and not obstruct your view or interfere with operation of vehicle safety equipment. The user of this product is solely responsible for observing safe driving practices. DO NOT operate XROAD V4050 while driving. Park the vehicle first and operate when necessary.
1. About This Book This handbook provides a quick guide to the XROAD NAVIGATION system, and the basic functions of the device are described mainly in respect of hardware. For reasons of product development some information may not be updated yet, and contents may be changed at any time without prior notification. No liability shall be assumed for technical or editorial errors or omissions herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright and thus may not be reproduced in whole or in part for any purpose whatsoever. Likewise, it may not be transmitted or reproduced in any form whatsoever, whether electronically or mechanically - including photocopying and recording. All brands and trademarks mentioned in this document may be registered by a third party and subject to current legislation and to the rights of their respective owners, without reservation. The absence of explicit labeling of registered trademarks does not admit the conclusion that the brand is not subject to the rights of third parties. © Copyright 2007, XROAD. All rights reserved.
Page_02 02. For Proper/Best Use 2.1 Generalཿ Effective route planning prior to the beginning of each journey is recommended. If you need to setup a new itinerary while en route, please drive to a safe place or a parking site first. For your own safety, do not operate the product while driving. ྀ The product is intended to be used only as a navigation aid, not as a precise measurement of direction, distance, location or topography. Because calculated routes and voice guidance are for reference only and may be different from the actual road circumstances, it is the user’s responsibility to follow traffic signs, road layout and local regulations above all else. ཱྀ When you get out of the car, please do not leave your device on the dashboard in direct sunlight, since an overheated battery can cause malfunction and/or hazard. Use the product within the recommended operational temperature range (0’C ~ 50’C), and do not expose it to excess heat or cold. ྂ GPS satellite signals cannot pass through solid materials other than glass. So when you are inside a tunnel or a building or in case of metallic windshield, GPS positioning may not be available. Likewise, signal reception can be affected by situations such as bad weather or dense overhead cover such as trees. Similarly, wireless devices may interfere with satellite signals, causing variable signal reception. ྃ Look at the display only when it is absolutely safe to do so. If you have not fully understood the instructions given by the device, or if you are not sure about what to do next, you may refer briefly to the map or arrow view of your navigation system.
02. For Proper/Best Use Page_03 2.1 Generalཆ A car holder is necessary when using the device in a car, and it is strongly recommended that you place the device in an appropriate place, avoiding areas for example which obstruct airbag panels and instruments, or which interfere with the driver’s vision. ཇ Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to it. Never clean your device with the power on. Use a soft, lint-free cloth moistened with water to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen. Do not place anything on top of your device or drop objects on top of it. Do not drop your device or subject it to severe shock. Be careful not to sit on your device when it is in the back pocket of your trousers, etc. The screen surface is easily scratched. ཈ Keep your device away from excessive moisture and extreme temperatures. Do not subject your device to sudden and severe temperature changes that could cause condensation inside the unit, with consequent damage. In the event of moisture condensation, allow your device to dry out completely. Avoid exposing your device to direct sunlight or strong ultraviolet light for extended periods of time.
Page_04 02. For Proper/Best Use 2.2 Safety Precautionཿ Main System Never attempt to disassemble, repair or make any modification to your device since this could cause damage to the device, and even bodily injury or property damage. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device and its parts or accessories. ྀ Battery This device contains a non-replaceable Lithium-Polymer internal battery that can burst or explode, releasing hazardous chemicals. To reduce the danger of fire or burns, never disassemble, crush, puncture, or dispose of in fire or water. Since there is a high risk of explosion if the battery is replaced by an incorrect type, replace it only with same type or an equivalent one recommended by the manufacturer. The battery must be recycled or disposed of properly. Similarly, use a specified battery charger as approved by the manufacturer. ཱྀ Adapter Never use the AC adapter in a high-moisture environment, or touch it when your hands/feet are wet. Also, for cooling purposes, make sure there is adequate ventilation around the adapter when in use, and do not cover it with paper, vinyl, cloth (including the carrying case) or any other material. The adapter must be connected to the correct power source, according to the voltage requirements indicated on the case or packaging of the product. Do not attempt to service the unit if its power lead or body becomes damaged or exposed to excess moisture. ྂ SD Memory Card Keep SD or MMC cards in a well-protected case so as to avoid dust and humidity when you are not using it, and also make sure that no foreign objects can enter the SD slot.
3. Getting It Started Page_05 Your device has an SD slot, for an optional Secure Digital card storing the initial startup program, digital maps and other data i.e. MP3 files, movie files and image files. To use the memory card, insert it pointing up into the slot, and the label facing the front of the device. To remove the card, first make sure that no application is accessing it, slightly push the top of the card to release it, and then pull it out of the slot. To take out the card, please turn off the unit. Before inserting another card, please press on the Power button. When you put SD Card into SD Slot located at the bottom of the device, please give a deep and hard push, which works for taking it out of the slot as well.3.1 Inserting SD Card WARNING: To avoid personal injury, or accidents, DO NOT install or remove the XROAD V4050 from the windshield suction mount while driving your vehicle. Also, be careful not to install the XROAD V4050 in a position to obstruct the view of the driver. 3.2 Mounting & Connecting 2. Slide the rectangular part 3. Insert the jack at the end of 1. First, clean the windshield. of the suction-cup mount the DC power leading into the small socket on the side of device and put the other end into the cigar lighter socket. Then, push the center of the into the corresponding part suction cup onto the wind- at the bottom rear of the unitshield and then press the fixing lever down
3. Getting It Started Page_06 3.3. Power Manipulation Power On Press the Power On/Off button to turn on the device. In case of the first use of the device that is discharged, connect the power into the unit through the car cigarette power jack or AC adaptor, then press Power On/Off button. Power Off Press the Power On/Off button to turn off the device. If the device remains connected to a 12V power jack, the battery will be charged. Bluetooth Button Press the Bluetooth On/Off button to launch the Bluetooth system WARNING: the battery is still running and discharging in all modes, except Power Off mode. * Please allow this delicate gadget to have enough time for its operation (e.g. in pressing buttons, tapping touch screen, executing each menu, pushing in/out SD card etc.) since running it too hastily and excessively often leads to mechanical trouble.
5. Hardware Accessories Page_07 5.1 Standard Accessories 5.2 Optional Accessories Note: the brand, type, spec, and photo of above accessories may vary with actual accessories. Also, accessories packaging items may be changed without prior notice.ྜྷྙྙྚྜྙAC Adaptor TMC External Antennaྚ External GPS Antennaྛ SD Card ReaderྜྚྛྜྛྞྙDVD with manuals & map data Cigarྜ-light adaptor Quick ྚStart Guide ྜྷ SD memory card ྛWindshield Suction Mount & Cradle Stylus pen ྞ
6. A Look at the Home Screen Page_10 6.1 Overview ཁ Finger Touch: This navigation instrument can easily be operated with your fingertip. However, if the vehicle is moving too much, or if you want to select a point with great accuracy, you will need to use the stylus pen. The surface of the LCD screen may be damaged if a sharp object is used, or if excessive pressure is used on the screen. ག SD memory card provided: If the map file is deleted, the navigation function does not perform properly. གྷ Multitasking: This function is used to perform multitasking (for example, navigation plus audio playback). However, this feature is NOT provided with the V4050 product. Once you pressed M button on the top left of the navigation, you may switch to main menu, but all other icons will be grayed out and will not function when you tap on it.
6. A Look at the Home Screen Page_11 6.1 Overview Select the desired menu icon from the main menu screen. The corresponding program then starts running. Navigation plus additional menus like Music, menu during program execution, press the program end key to move to the main Movie, Picture, Game, Settings. To use the main press the main menu key or menu. When you enter main menu, the programbeing executed automatically ends. Press the desired menu icon in the main menu. The corresponding program then starts running.Main menu function description - Navi: Starts the navigation function.- Music: Starts the music playback function that enables playing mp3 and wav files.- Movie: Starts the movie playback function that enables playing avi, files. - Picture: Starts the picture function that enables viewing bmp, jpg, gif, and png files. - Game: Starts the game - Settings: Starts the screen/environment setting function.
6. A Look at the Home Screen Page_12 6.2 Navi This function guides you to your final destination by voice prompts and a mapping screen, showing crossroads, city names and much more. It also provides various map-guiding modes and the approximate time left to your destination. Pop into the Navi menu and wait for the navigation program to load all the necessary data. Soon a digital map will appear before your eyes. For further information regarding navigation usage, refer to the separate software user manual contained in the DVD provided as a standard package.
6. A Look at the Home Screen Page_13 6.3 Music ཁ Information Before Playing Music FilesTo play a music file, the mp3, wav, or wma file must be saved in an SD memory card. If there is no SD memory card, a sample file is read. If the SD memory card is disconnected during playback, a sample file is located at the file being played and the music playback stops. If the SD memory card is short of capacity, purchase another SD card. Then you can save more files. Even if the capacity of the SD memory card is not enough to download a music file, do not delete the map file.
6. A Look at the Home Screen Page_14 6.3 Music ག Music Screen DescriptionSelect Music from the main menu. When you enter Music, the last file played is located at Current Music. If the last music file does not exist in the SD memory card, the first file available in the card is located at Current Music. If there is no SD memory card, a sample file is located at Current Music. Press the End Button(x) on the drawing here after or the main menu key to end Music and move to the main menu. If you push on main menu key, music goes on. At that time, if you come back to the main menu, you can choose other available applications.
6. A Look at the Home Screen Page_15 6.3 Music ཱྀ Playing a Music File Press the Play button to play a music file located at Current Music. Current playing time is being counted. Current status is displayed as playback status. If a file being played is damaged, the next file will be played without opening a pop-up screen.
6. A Look at the Home Screen Page_16 6.3 Music ཱྀ Playing a Music File - All Files DamagedPress the Play button when a file located at Current Music is damaged. - 1 Track Repeat: Music playback stops after a pop-up screen opens. - 1 Track Repeat/All Play/All Repeat: If all music files are damaged, press the Play button. A pop-up screen opens and the music playback stops.
6. A Look at the Home Screen Page_17 6.3 Music ང Playing a Music File - There is a Damaged FilePress the Play button when a file located at Current Music is damaged. All Play/All Repeat: A pop-up screen opens and the next playable file is played.
6. A Look at the Home Screen Page_18 6.3 Music ཅ Pause Playback stops temporarily. Current status is displayed as Pause. The Play button is deactivated and the Pause button is activated. The playback indicator on the playback bar stops moving. When pressing the previous/next music file during Pause, pause is automatically released and the previous/next music file is played. Press the Play button when a file located at Current Music is damaged. All Play/All Repeat: A pop- up screen opens and the next playable file is played.
6. A Look at the Home Screen Page_19 6.3 Music ྄ Stop Playback stops. Current status is displayed as Stop. Current playing time appears as ’00:00:00’. When pressing the previous/next music file during Stop, only the file name moves.
6. A Look at the Home Screen Page_20 6.3 Music ྅ Repeat All Repeat is default. All Repeat->All Play->1 Track Repeat->All Repeat-> All Play… When repeat status is set, the current repeat status is changed. The Repeat setting status is maintained even if you exit Music and go back into it again.
6. A Look at the Home Screen Page_21 6.3 Music ྆GVolume Adjustment/MuteVolume cannot be adjusted via the touch screen. It is adjusted by controlling the volume adjustment bar. Press the Mute key to use the mute function. Press the Mute key again to release the mute function. Mute is automatically released when the mute function is selected again after the function ends.
6. A Look at the Home Screen Page_22 6.3 Music ྇G Previous/Next Music FileZoom -/+: Select the next music file while the last music file is being played, and the first music file is played. Select the previous music file while the first music file is being played, and the last music file is played. When there is a damaged music file, the file is skipped and the next music file is played.
6. A Look at the Home Screen Page_23 6.3 Music ྇G Music Play List DescriptionCurrent status (Pause/Stop/Play) is maintained. Focus is located at the music file being played. The default arrangement status is ˄random˅. Press the Cancel button to move to the previous screen. When the length of the file name where the focus is located is long, the file name flows from right to left. When you exit Music and go back into it again, the list is re-created.
6. A Look at the Home Screen 6.3 Music Page_24 ྇G Music Play List ArrangementWhen the Random button appears, the list is in random status. Press the Random button to arrange the list in alphabetical order. The Random button changes to the ABC button.
6. A Look at the Home Screen Page_25 6.3 Music ྈG Music Play List PlaybackPress the list once - Focus is selected. Press the list once again - The file is played.
6. A Look at the Home Screen 6.4. Movie ཿ Tips for Playing a MovieWhen a movie file (avi) exists in the SD memory card that is inserted into the device, it automatically searches and shows both the file list and the movie start screen. When there is no movie file, the sample movie list built into the device shows, in stop mode. As with a movie entry, an hourglass appears when the loading time is extended. The map file must not be deleted even if the capacity of the SD memory card provided is not sufficient to allow the movie file to be downloaded. If the capacity of the SD memory card provided is not sufficient, you can buy an additional SD Page_26 card to allow you to save more files. Play in full screen (optimized to the movie size of 340 X 240). Automatically plays the next file after playing the current file. When automatically playing the next file, the file is immediately played without a loading popup. When the next file is automatically played and the file is damaged, a popup with ˈCannot play this fileˉ will be displayed, and the device is changed to a stop status. If the SD memory card is removed while in use, the message ˈSD MEMORY CARD REMOVEDˉ pops up, and the unit stops. In this eventuality, the filename and total playtime of a sample file will be shown. If the SD memory card is inserted again, the message ˈSD MEMORY CARD INSERTEDˉ pops up, and the last played file will be loaded in stop mode. When there is no file to be played, it simply displays a sample file.
6. A Look at the Home Screen 6.4. Movie Page_27 ག Movie Execution Process
6. A Look at the Home Screen 6.4. Movie ག Screen Explanation – Control Bar/Button Page_28
6. A Look at the Home Screen Page_29 6.4. Movie གG Screen Explanation - List ScreenMaintain the current status (Pause/Stop/Play). Focus is placed on the movie file being played. Move to the previous screen when the ˈCancelˉ button is pressed. Remake the list again when an entry is made after ending a movie. The count will be shown when the total number of files read is in progress
6. A Look at the Home Screen 6.4. Movie Page_30 གG Screen ExplanationGTGPlay in a Full Screen
6. A Look at the Home Screen Page_31 6.4. Movie གྷG Playing a Movie ངG Selective movie playing is possible when 2 or more movies are stored in the SD memory card. (see page 27) (see page 27) (See page 27) (see page 27)
6. A Look at the Home Screen 6.4. Movie Page_32 ཅG Movie Entry Show the last played filename. If there is no previous file, the loading screen will not appear. Show a sample file. The time lapse and play screen show the last play position of the movie. When the play button is pressed, the count starts from that point. Show the current status as stopped if a previous file was in play.
6. A Look at the Home Screen 6.4. Movie Page_33 ཆG Movie Control Bar - Pause/StopWhen the screen is touched while playing a movie, the Control Bar will appear and the movie will be paused :No. When the screen other than the buttons from the Control Bar is pressed, the Control Bar disappears and play is done in full screen. There is no stop button, the first screen of the currently playing file appears. The file is played from the beginning when the stop and play buttons are pushed successively.
6. A Look at the Home Screen 6.4. Movie Page_34 ཇG Movie RW/FF By moving the play section quickly (10 seconds in succession) forward/backward with the red-lined buttons, the movie can be quickly jumped to a section. The movement stops if the button is clicked again.
6. A Look at the Home Screen Page_35 6.5 Picture ཁG Introduction before Viewing ImagesTo view an image file, the bmp, jpeg, or jpg file must be saved in a SD memory card. If there is no SD memory card, a sample file is read. If the SD memory card is disconnected during playback, a sample file is displayed and the image play stops. If the SD memory card is short of capacity, purchase another SD card. Then you can save more files. Even if the capacity of the SD memory card is not enough to download an image file, do not delete the map file.
6. A Look at the Home Screen 6.5 Picture གG Picture Screen DescriptionSelect Picture from the main menu. The last image file viewed is displayed. If no previous image file exists in the SD memory card, the first image file is displayed. If the number of files read is being counted. The number is displayed as ˄ˎ˅. (This occurs if more than 1,000 files are saved.) File name may be cut if the length of the file name is long. Press the End button or the main menu key; the image file closes and you go into the main menu. If the last file does not exist in the SD memory card, the first file in the list appears. If the last file is damaged, the previous file appears. If no image file exists in the SD memory card, a sample file appears. Page_36
6. A Look at the Home Screen 6.5 Picture གྷG Previous/Next ImageIf there is a damaged file, skip the file and the next file is displayed. Press the Previous button while the first file in the list is displayed, and the last file in the list is displayed. Press the Next button while the last file is displayed, and the first file in the list is displayed. Page_37
6. A Look at the Home Screen 6.5 Picture Page_38 ངG Image in Full Screen Press an image. The image then appears in full screen.
6. A Look at the Home Screen 6.5 Picture ཅG Image in Full Screen - Enlarge/ReduceArrow-shaped buttons (left, right, up and down) appear, enabling an image to be enlarged/reduced. The buttons in an enlarged image changes the focus of the image. The enlargement indicator is only displayed for *2/*4. An image can only be enlarged/reduced in full screen. Page_39
6. A Look at the Home Screen Page_40 6.5 Picture ཆG Image in Full Screen - Enlarge/Reduce-Moving to the Last ImageMoving to the last image displays the last file in its original size (*1).
6. A Look at the Home Screen 6.5 Picture Page_41 ཇG Slide Images are displayed at three second intervals. Slide show occurs in full screen. If the screen is pressed during a slide show, the current image is displayed in the previous mode. After the last file is displayed, the first file is displayed automatically after three seconds. If there is a damaged file, the file is skipped and the next file is displayed. If the file size is large, opening the slide may take more than three seconds.
6. A Look at the Home Screen Page_42 6.5 Picture ཈G Picture List Description Focus is located at the file being displayed. When the length of a file name where the focus is located is long, the name flows from right to left. When pressing the Cancel button, you move to the previous screen and the file where the focus is located is displayed. When the image file being displayed is stopped and you enter PICTURE again, another list is created. If the number of files read is being counted, the number is displayed as ‘…’.
6. A Look at the Home Screen 6.5 Picture ཉG Picture List View Press the list once-Focus is located. Press the list once again-The file is displayed. Play-If a damaged file is recognized during loading, the loading stops and a pop-up screen opens. Page_43
6. A Look at the Home Screen 6.5 Picture ཉG Damaged File in Picture ListPlay button: Disabled. Cancel button: The last file is displayed in the main screen of Picture. If the file size is too large, the file is processed as a damaged file. If the focus is located at a damaged file, ˈThis file is damagedˉ is displayed in the Picture Viewer. Page_44
Among 32 different picture cards, you should pair 2 same picture cards. Once you execute the game, you will have the previewing mode during 5 seconds before starting the actual game. After 5 seconds preview mode, the initial card will start to be reversed and the game time will progress. 6. A Look at the Home Screen 6.6 Game (option) Page_45 Preview Screen Game Progressing Screen Time up play againAfter 5 seconds preview mode, the initial card will start to be reversed and the game time will progress. Once your game time is over, you can start new game by pressing "New Game" button. Score . Each single failure of card pairing will deduct 10 points from your score. . Each single success of card pairing will add 100 points to your score. Once your game time is over, the below screen will be pop-up. You can start
06. A Look at the Home Screen Page_46 6.7 Setting ཁ Environment Settings Settings are applied immediately. The screen setting tabs appear. When accessing the screen setting tab, the last setting status appears. If a screen with changes is exited without pressing the ‘Save’ button, the change is canceled. Close the changed setting by pressing the End button or the main menu key, and move to the main menu screen. The changed setting is saved by pressing the ‘Save’ button.
06. A Look at the Home Screen 6.7 Setting ག Saving the Settings Page_47
06. A Look at the Home Screen 6.7 Setting ག Saving the Settings When saving settings, a pop-up screen indicating “Saved” is displayed and the menu moves to the main menu.Page_48
මགྷG Auto-bootingBy clicking on the auto booting in the Settings, when user starts the ignition of the vehicle, Carpoint’s navigation boots up automatically 06. A Look at the Home Screen ངG Auto shutdown or continue on batteryWhen turning off the engine of the vehicle, removing cigar jack adaptor or AC adaptor from the device, the device will ask whether to continue with the battery power. The device turns off in 10 seconds if you do not press the button. When pressing the Yes button, the device will continue to run with the battery Page_49
Page_50 7.1 Using SD Card Reader 07. Transferring Multimedia Files Insert an SD storage card into your device and turn on your computer and the device. Once the SD reader and your PC are connected, move the desired objects to the SD card
Page_51 9. Capturing GPS Signals from SatellitesAfter initial purchase it is highly recommended that users drive to where the sky is clearly visible, with no obstruction from skyscrapers, overpasses, high-tension cables, overhead walkways or trees, since it may take some time to receive GPS signals: i) depending on circumstances/environment (time, location, satellite status etc.), ii) if the GPS gets reset while driving or iii) in the case of first-time use. If no GPS signals can be picked up after waiting for quite a while, please restart the whole navigation system by pressing the Power button on the left side of the device. However, choosing the “GPS Reset” button from within the menu will lead to complete deletion of all existing GPS information, so it is best to use this function only after moving a long distance from your previous location.
10. Bluetooth The XROAD V4050 includes Bluetoothconnectivity. With its embedded internal microphone, it allows you to answer and make calls from the touch screen. Please see below the description of Bluetooth icons appear on the screen. 1. Bluetooth module is disabled. 2. Bluetooth is not connected nor paired to any of the Bluetooth phone. Page_52 3. Bluetooth Hands free and Headset are connected. 4. Bluetooth is in Hands-free mode. 5. Bluetooth is connected as Hands-free and is in the calling stage. 6. Bluetooth is connected to the Bluetooth headset. Press the Bluetooth button on the lower left button on the front of the XROAD to launch the Bluetoothsystem. In case the Bluetooth icon already appears on the screen the Bluetooth system is already in activated stage.
Pairing your Bluetooth Phone with the XROAD as a Hands-Free Mode Page_53 Ensure that the Bluetooth is active and discoverable on your phone and tap on the Hands-Free button to set up your phone with XROAD device Add Device: Tap on this Add Device to connect XROAD to your Bluetooth Phone. If you choose Add Device, you may have to set your phone to allow devices to find it. Find Me: Tap on this Find Me to allow the XROAD to be found by your phone. You will use your phone to connect to XROAD.
Using XROAD to Connect to your Phone Page_54 Tapping on the Add Device will cause the XROAD to search for the available Bluetoothdevices. Select your phone from the list and tap Connectto connect the XROAD to your phone. When connection is successful, you will be prompted to enter your PIN code. Tap Key Pad to open the on-screen keyboard and enter your PIN code. The default pin code is 0000. Tap OK to record your entry. The XROAD will pair with your phone. You may need to enter the PIN code or perform other functions on your phone to complete the pairing. Please watch your phone screen during this process.
Using your Phone to Connect to XROAD Page_55 Tapping on the Find Me will cause the XROAD to enter Discoverable Mode, allowing other Bluetooth devices to connect to it. You can use your device to pair with the XROAD. Once you enter the PIN code on your phone, the XROAD will ask that you verify the PIN. Tap Touch Pad to open the on-screen keyboard and enter your PIN code. The default pin code is 0000. Tap OK to record your entry. Your phone should now be paired to the XROAD. You may pair your phone with the XROAD as a headset by tapping the Headset button from the Main Menu. This method of connecting the XROAD to your phone is useful only if there has been difficulty connecting the XROAD as a hands-free device. When you pair the XROAD and your phone this way, the XROAD allows you to answer calls only. You cannot initiate calls using the XROAD in headset mode.
Managing Bluetooth Devices Page_56 You may have multiple phones set up for connection with your XROAD. You can add and remove phones from your list and disconnect and connect to different phones using the List Screen. If you have phones already paired to the XROAD, but none of them are currently connected, the below screen will appear if you select Hands-Free from the Main Menu.Connect: You may tap to connect to the currently selected device. Find Me: You may tap on the Find Me to put the XROAD in the Discoverable Mode, which allows Bluetooth devices to find it. List: you may tap on the List to display the Device List screen. Paired List Screen allows you to connect to a device, add devices, and remove device by pressing the buttons on the bottom. You may select a device to connect to or remove from the list.
Making a Bluetooth Hands-Free Call Page_57 Select the Hands Free icon from the Bluetoothmenu to place a call using a currently connected device. Touch Call: Tap on this icon to open the number keypad and dial the call. Favorites: Tap on this icon to access previously stored favorite numbers. History: Tap to view the recent call history and select a number to call. Voice Call: Tap on this icon to make a voice call. This voice calling feature must be enabled on the phone. 1. Touch Call You may tap on the Touch Call to open the keypad and tap in the keys for the number you wish to call and then tap Call to initiate the call. As you tap on either the numbers or alphabets, it will appear the top of the screen. You may also tap on the backspace to delete a number or alphabets.
Making a Bluetooth Hands-Free Call Page_58 2. Favorites You may tap on the Favorites to access a list of your previously stored favorite numbers. You may select a number from the list. Call: Tap on the call button to call the selected favorite number. Add Favor: Tap on this button to add a favorite number Remove: Tap on this button to remove a selected favorite number. 3. Call History You may tap on the History to access to a list of your previously called or received numbers. 4. Voice Call You can tap on the Voice Call to make a call by speaking The number of a previously recorded voice call number on your phone.
Answering a Bluetooth Call Page_59 When a call is received by a paired phone, the XROAD will display the Incoming Call screen which shows the number calling. In case the number is unknown, it will display “Absent.” You may tap on the Answer button to answer the call or Refuse button to refuse the call. In-call Options During a call, you may press the Bluetooth button on the front case of the XROAD to open the screen of the in-call options. To Phone: Tap on this button to move the call from XROAD to your phone. Send DTMF: Tap on this button to send DTMF. End Call: Tap on this button to end the call. New Call: Tap on this button to open the touch pad and make a new call. Switch to : When having 3-way calling, you may switch to other party. Release to : When having 3-way calling, you may end the Current call and switch to other party’s call. Activ. Only : When having 3-way calling, except the current call, all waiting calls will be ended.
Bluetooth Settings Page_60 You may tap on the Settings button to open the Setting screen. On the upper part of the screen, it shows the Windows CE and current Windows CE Address of this XROAD device. You may tap on the Enable/Disable button to toggle between enabling or disabling Bluetooth.You may tap on the Bluetooth reset button to reset the Bluetooth.

Navigation menu