Cardo Systems SC02 Bluetooth Headset User Manual scala 600 manual v4
Cardo Systems, Inc. Bluetooth Headset scala 600 manual v4
User Manual
scala-600™
COVER
scala-600™
ALL THIS SHOULD APPEAR AT THE END OF THE GUIDE.
U.S. and Worldwide Patent Pending;
©2006 Cardo Systems Inc.
Assembled in China.
Bluetooth® is a trademark owned by Bluetooth® SIG, Inc.,
scala-600™ is a trademark owned by Cardo Systems, Inc.
All rights reserved by Cardo Systems, Inc.
Cardo Systems, Inc. reserves all rights and explicitly prohibits any copying, dissemination, or other commercial
use of the text and/or images or any part thereof contained in this manual, with the exception of end-users of the
scala-600 headset for their own personal use, of authorized resellers and of journalists covering this product for
media purposes.
scala-600™
I
TABLE OF CONTENTS
1. INTRODUCTION ..............................................................................................................................1
FEATURES.............................................................................................................................................1
DEFINITIONS.........................................................................................................................................1
2. SAFETY .............................................................................................................................................. 1
USE WHILE DRIVING ............................................................................................................................2
INTERFERENCE WITH OTHER DEVICES .................................................................................................2
Pacemakers.....................................................................................................................................2
Hearing Aids ...................................................................................................................................2
Other Medical Devices....................................................................................................................2
3. PACKAGE CONTENTS ...................................................................................................................3
4. BEFORE USING................................................................................................................................4
COMPONENTS .......................................................................................................................................4
CHARGING THE BATTERIES ..................................................................................................................4
5. GETTING STARTED WITH THE SCALA-600 ............................................................................4
TURN ON/OFF.......................................................................................................................................4
PAIRING................................................................................................................................................4
How to pair:....................................................................................................................................4
RECONNECTING THE HEADSET TO A PAIRED PHONE ............................................................................5
WEARING THE HEADSET.......................................................................................................................5
CHANGING THE HEADSET ORIENTATION ..............................................................................................5
6. HANDLING CALLS..........................................................................................................................5
INITIATING CALLS ................................................................................................................................5
Initiating calls using your phone’s keypad .....................................................................................5
Voice Dialing ..................................................................................................................................5
ANSWERING CALLS ..........................................................................................................................776
TERMINATING CALLS ....................................................................................................................... 776
VOLUME CONTROL........................................................................................................................... 776
MUTE FUNCTION
REDIAL .............................................................................................................................................776
CALL REJECT.................................................................................................................................... 776
CALL WAITING / CONFERENCE CALL ...............................................................................................776
7. UNDERSTANDING THE LIGHT INDICATORS (LEDS) AND SOUND SIGNALS ............ 887
INDICATOR LIGHTS ...........................................................................................................................887
TONES ..............................................................................................................................................887
8. FAQS ...............................................................................................................................................998
9. SUMMARY OF FUNCTIONS.................................................................................................. 10109
10. TROUBLESHOOTING......................................................................................................... 111110
11. TECHNICAL SPECIFICATIONS ....................................................................................... 121211
12. FCC NOTICE ......................................................................................................................... 121211
13. EUROPEAN CE NOTICE .................................................................................................... 121211
14. LIMITED WARRANTY ....................................................................................................... 121211
scala-600™
1
1. Introduction
Congratulations and thank you for purchasing
the scala-600TM, one of the world's most
advanced and versatile Bluetooth® powered
wireless headsets for mobile phones.
You can also use the scala-600TM with a non-
Bluetooth phone if you attach your cell phone
to the CARDO BT Adapter (purchased
separately).
Features
• No wires or software needed to connect your
headset to your mobile phone. While using
your headset you may be up to 30 feet or 10
meters apart from your phone.
• Lightweight and comfortable to use and
wear. The scala-600 weighs only .45 oz.
(~12.5 grams).
• High-capacity, rechargeable Lithium-
Polymer battery provides extended talk time
of up to 9.5 hours and in excess of one week
standby time.
• Universal Travel charger 110/240V 50/60Hz
• Supported Functions: Mute, Hold, Redial,
Call Reject, Voice-Dialing, Conference-Call
and Call-Waiting.
• Supporting handsfree and headset profiles
• Calls can be answered and terminated from
either the headset or from your mobile
phone (subject to your phone's capabilities).
• Calls can be initiated from your mobile
phone; audio will be heard on the headset*
• 2-year Limited Warranty.
* Some phones require that you press briefly CTRL to transfer
the call
Definitions
BT Bluetooth®
LED Light Indicator on the headset
CTRL Control Button on the headset
2. Safety
Observe the following safety precautions when
using your headset:
• Carefully read and understand the
instructions in this manual.
• Follow all instructions and warnings labeled
and marked in this manual.
• Use a cloth to clean the headset. DO NOT
use liquid or aerosol cleaners.
• Use caution when using your headset near
water such as bathtubs, sinks, or swimming
pools.
• Do not expose your headset to extreme
temperature, moisture or high voltage.
• Your headset is rugged, but can be damaged
or broken if not handled with care.
• Do not expose headset to liquids, nor place
heavy objects on it.
• Do not disassemble the product or any of its
components for any reason, as this will void
the warranty and may damage the electronic
circuits. If assistance is needed, contact the
store from which you have purchased the
product, visit our website at
www.cardowireless.com or contact us via e-
mail at: support@cardosystems.com.
To reach us via phone, please call:
In the U.S.: Toll-free 1-800 488-0363
or 412 788-4533
in Europe: +4989 450 36-819
NOTE: Prior to contacting us, make sure
you have a valid registration number available.
• Discontinue the use of your headset if:
o Your headset is damaged.
o Liquid has been spilled on or into the
headset.
o Your headset has been dropped and
the case has been damaged.
o Your headset exhibits a distinct
change in performance.
o Your headset does not operate
normally and adjusting the controls
does not resolve the issue.
• Disconnect your headset from the wall
charger if:
o Liquid has been spilled into the
charger or headset.
o The wall charger does not operate
normally after following the operating
instructions.
o Your wall charger has been dropped
and the case has been damaged.
o The wall charger exhibits a change in
performance.
scala-600™
2
Use While Driving
Check the rules and regulations regarding the
use of wireless headsets in the area where you
drive and obey the laws at all times. Pull over
to the side of the road and park before making
or answering a call if driving conditions
require it. Do not initiate calls, perform pairing,
re-connecting or similar operations while
driving.
Interference With
Other Devices
Most electronic equipment is shielded from RF
signals. However, certain electronic equipment
may not be shielded against the RF signals that
emanate from your wireless equipment.
Pacemakers
The Health Industry Manufacturers
Association recommends that a minimum
separation of about six inches (16 cm) be
maintained between a mobile phone or a
headset and a pacemaker to avoid potential
interference with the pacemaker. Be sure not to
interfere with the functionality of personal
medical devices.
Hearing Aids
Some digital headsets may interfere with some
hearing aids. In the event of such interference,
you should consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device and/or
your physician to determine if it is adequately
shielded from interference caused by external
RF energy. Your physician may be able to
assist you in obtaining this information.
scala-600™
3
3. Package Contents
Your retail package contains the following items:
scala-600 Headset
Ear Loop
Wall Charger
Quick Start Guide, Warranty and
Registration Card
NO IMAGE NEEDED HERE
Ear-Loop Bow (flexible)
Ear-Loop Pin (rigid)
scala-600™
4
4. Before Using
Components
Charging the Batteries
Make sure the headset is fully charged prior to
initial use. Allow 4 hours for a full charge
before using for the first time. Normally allow
for approximately 2-3 hours to complete a full
charge.
1. Connect the headset to the wall
charger or the optional car-charger
2. The Indicator Light on the scala-600
will turn red when charging
commences. Allow the headset to
charge until the Indicator Light turns
off.
3. When charging begins, the headset is
automatically turned off. You must
turn it on again if you wish to use it
after charging.
5. Getting Started
With the scala-600
Turn On/Off
To turn ON the Headset, press and hold the
wheel for at least 6 seconds until an ascending
tone is heard, and a blue indicator light
illuminates. Release the button. If you have not
completed pairing and this is the first time that
you have turned the Headset on, the Indicator
Light will flash red and blue indicating that the
Headset is entering pairing mode. If the
Headset has already been paired the blue light
will flash every 3 seconds to indicate that the
device is in standby mode.
To turn OFF the Headset, press and hold the
wheel for at least 3 seconds until a red flashes
3 times and a tone is heard. Release the button.
Pairing
Pairing is a required process in which the
scala-600 headset and your mobile phone
become acquainted with each other for the first
time. At the end of this process both devices
retain information about each other, so that
every time you turn one of them on, it will
look for the other device and will be able to
operate automatically with it. Pairing is
required only the first time for a specific scala-
600 headset and a specific mobile phone.
Please refer to the Pairing section of your
mobile phone’s manual prior to initiating the
process.
NOTE: If, after your devices are paired, you
wish to use your headset with a different phone,
you must pair the headset to the new phone.
How to pair:
1. Turn on the phone and make sure its
Bluetooth function is activated.
2. Make sure the headset is turned off.
3. Press and hold the Wheel for about 8
seconds until the red and blue LEDs
start flashing rapidly.
4. On your Bluetooth equipped phone,
search for Bluetooth devices by
following your phone’s instructions.
Usually this is done by selecting the
Search or Discover option in the
Bluetooth or Connection menu. Refer
to your phone’s manual for detailed
instructions on how to pair your
specific phone.
5. After a few seconds of searching,
your phone will list the “scala-600”
scala-600™
5
as a discovered device. Select it, and
when asked, follow your phone’s
instructions to select the device.
6. When prompted by your phone, enter
0000 (4 zeros) as your PIN or
passkey.
7. Your phone will confirm successful
pairing.
NOTE: If pairing is not completed within two
minutes, the headset will return to standby
mode (flashing blue every 3 seconds). To pair,
re-start the process from the beginning.
Congratulations! You have now successfully
completed your Bluetooth pairing process and
are able to use your scala-600 headset in
conjunction with your mobile phone. From
now on, when using your headset, you will no
longer need to pair the headset to the phone,
since the two devices will remain paired until
you delete that pairing from the phone.
Reconnecting the Headset
to a Paired Phone
Although you may have previously paired your
headset to your phone, each time you turn one
of them off, some phones require that you re-
establish the link. Reconnecting may also be
necessary when your headset and phone have
lost the radio signal because the distance
between them has exceeded 30 feet or 10
meters, or major obstacles have come in the
way. After you have turned on your headset
and mobile phone, there are several methods to
re-establish the link if needed:
• Assuming your mobile phone is voice
activation capable, press briefly the
headset’s CTRL button to activate voice
dial. A signal on your phone’s screen will
indicate that the link is re-established.
• Do nothing. Once a call is received, answer
by pressing the CTRL button.
• With some mobile phones you should refer
to your phone’s menu and/or manual.
• The most likely solution is to simply turn off
the headset and then turn on again after
several seconds.
Wearing the Headset
1. Insert the pin of the ear loop into the
holding duct of the headset (FIG. 1) .
2. Determine the eventual height of the
loop by adjusting the insertion depth
of the pin into the holding duct.
Select a depth, so that when wearing
the headset, the speaker fits snugly
into the opening of your ear canal.
3. Push the ear loop away to create an
opening between loop and headset.
4. Place the opened ear-loop around
your ear and push the headset’s
speaker towards your ear to achieve a
steady and comfortable grip.
5. If needed, bend the flexible bow of
the ear-loop around your ear.
Changing the Orientation of
the Volume Controls
As a default, the Wheel is set for the right ear,
so that moving up on the Wheel increases the
volume, while moving down decreases the
volume.
To change the Wheel orientation from right to
left ear, press the Wheel and Control button for
at least three seconds while the headset is
turned off.
6. Handling Calls
Initiating Calls
NOTE: Certain advanced features of the scala-
600 are only accessible to phones equipped
with the "hands-free" profile. Please check if
your phone supports both the "headset profile"
and the "hands-free profile".
Initiating calls by using your
phone’s keypad
1. Dial the desired phone number.
2. Press “Talk” or “Send” on your
phone to dial the number.
NOTE: Some phones do not transfer the call
automatically to the headset when initiating
the call by the phone’s keypad. In this case
press briefly CTRL or use the phone’s keypad
to transfer the call to the headset.
Voice Dialing
To use voice activation (if available), you must
first assign voice tags to the desired parties
listed as your contacts in your mobile phone. If
you are not familiar with this procedure, please
scala-600™
6
scala-600™
7
refer to the manual of your mobile phone. To
improve voice tag recognition, use the headset
to record voice tags on your phone.
While your phone is ON but no call is in
progress, press briefly the CTRL button,
followed by a sound. Now pronounce the name
of the party you wish to call and wait for
feedback from the phone. The type of feedback
depends on your phone.
NOTE: After activating the Voice-Dialing
command, you may always cancel the
command by simply tapping CTRL once.
Answering Calls
When you hear the ring tone either on the
headset or on the phone, tap briefly CTRL.
NOTE: With some mobile phone models the
connection might be slightly delayed. In such
case, wait several seconds after pressing CTRL
until you hear a sound on the headset.
Pressing CTRL again too soon, might
disconnect the call.
Terminating Calls
To terminate a call, press briefly the CTRL
button, followed by a sound to confirm the
termination. Wait at least three seconds before
pressing the CTRL button again to place a new
call. Alternatively, you may terminate a call by
using the END key of your mobile phone. If
the other party terminates the call, no further
action on your part is required.
Volume Control
In addition to using the volume controls of
your mobile phone, you can use the Wheel to
adjust the headset's speaker volume.
Increase the
volume
Move the Wheel up by
steps. When you hear a
beep it is at maximum.
Decrease the
volume
Move the Wheel down by
steps. When you hear a
beep it is at minimum.
Mute Function
To activate MUTING: During an ongoing call,
briefly press the center square of the Wheel.
Muting works only with mobile phones that
are equipped with the headset profile. For
phones that support the handsfree profile,
pressing the WHEEL puts the ongoing call into
HOLD. To de-activate either function, tap the
WHEEL again.
Redial
To redial the last number: While no call is in
progress, press the Wheel in quickly and
release.
Call Reject
While no call is in progress and you hear the
ring tone, press and hold CTRL for three
seconds to reject the call and stop the ringing
Call Waiting / Conference
Call
NOTE: This feature works only with mobile
phones that fully support the Bluetooth
"handsfree profile".
• While one call is in progress and there is a
second incoming call (call waiting), tap the
Wheel to put the current call on hold and
accept the second call.
• While one call is in progress and second call
on hold, tap the Wheel to swap the calls.
• While one call is in progress and second call
on hold, press and hold the Wheel for three
seconds to add the held call to a conference
call.
• To TERMINATE one of the calls in
progress, tap briefly the CTRL button.
Doing so will let you continue the second
call in progress.
scala-600™
8
7. Understanding the
Light Indicators
(LEDs) and Sound
Signals
Indicator Lights
The Headset uses the following indicator lights
to display its status
Indicator Light Status
None Headset is off or Indicator
Light is disabled
3 blue flashes Powered on successfully
3 red flashes Powered off successfully
Alternating Red/blue
flashes
Entering pairing mode
1 blue flash every 3
seconds
Standby – No call in
progress
2 blue flashes every
3 seconds
Call being initiated or in
progress
1 red flash every 3
seconds
Headset on Standby and
battery is low
2 red flashes every 3
seconds
Call being initiated or in
progress and battery is low
Steady red Headset is being charged
Tones
With the exception of the actions described in
the following table, all actions are followed by
a single tone to confirm that the headset has
accepted the action.
Action Tone
Mute On/off tone and mute
reminder tone every 20
seconds
Volume up Tone on maximum
volume
Volume down Tone on minimum
volume
scala-600™
9
8. FAQs
What is the Cardo scala-600 headset?
The scala-600TM wireless headset is a
comfortable, stylish and easy to use high-end
accessory to a Bluetooth® mobile phone or
smart-PDA that enables you to hear and speak
without holding your mobile phone near to
your ear.
Do I need an Adapter if I already have a
Bluetooth enabled cell phone?
No. Your scala-600 communicates with
virtually every Bluetooth phone.
How does the scala-600 headset work?
Once the scala-600 is “paired” to your
Bluetooth enabled mobile phone, the two
devices communicate wirelessly using
Bluetooth technology.
If I want to keep my non-Bluetooth mobile
phone, can I still use it with my scala-600?
You can hold on to your non-BT mobile phone
and still enjoy the benefits of the headset, if
you use the Cardo BTA II Bluetooth Adapter
(purchased separately). The BTA II Adapter
plugs directly into the headset jack of most
non-Bluetooth phones, thereby enabling the
phone to communicate wirelessly with your
headset.
Is the battery removable?
The battery is not removable and you should
never try to open the headset. The Headset
should be serviced by authorized personnel
only.
Do I need to turn my headset off or leave it
on when it is recharging?
Either way is fine.
When I turn on my cell phone, do I need to
pair or link my cell phone and headset again?
Once your mobile phone and headset are
paired, you will not have to pair it again,
unless an unforeseen error has occurred.
Generally, you will only need to implement the
simple steps of reconnecting your phone and
headset each time either or both are turned off
or have moved more than approximately 30
feet (10 meters) apart from each other.
Will other Bluetooth phones interfere with
my scala-600 headset? Can they eavesdrop?
No. Once you are paired, your identity is
known only to the mobile phone you use and
no other Bluetooth phone can hear your audio
signals.
How can I improve stability of the headset
when using the ear-loop?
The bow of the ear loop is highly flexible and
can be bent to tighten its grip around your ear.
Can the headset cause interference with my
car radio?
No, the Bluetooth standard does not interfere
with car radios.
Can Wi-Fi or other 2.4 MHz transmissions
in the vicinity interfere with the scala-600?
We have not encountered such events, but in
general, interference may occur with any
Bluetooth headset, including the scala-600.
Can I wear the scala-600 in the rain?
Keep in mind that scala-600 is not waterproof.
Will scala-600 work with more than one
Bluetooth phone?
Yes, your scala-600 headset can be paired with
several Bluetooth phones, but you can only
work with one at a time.
More questions? Please visit our FAQ page at
http://www.cardowireless.com
scala-600™
10
9. Summary of Functions
Explanations:
Long press = Pressing the button for at least 3 seconds
Tap = Briefly press the button
If you want to… …doDo this
Turn on the headset Press the Wheel steadily for at least 3 seconds
Turn off the headset Press the Wheel steadily for at least 3 seconds
Answer a call Short press the Control Button
Reject a call Long press the Control Button
Terminate a call Short press the Control Button
Increase the volume Move the Wheel up by steps. When you hear a beep it is at
maximum.
Decrease the volume Move the Wheel down by steps. When you hear a beep it is at
minimum.
Mute/Un-mute During a call short press the Wheel
Transfer a call to the phone During a call, long press the Control Button
Voice Dial During standby, short press the Control button and state the
name of the person you wish to call. Note that the persons name
and number must first be entered in the phone’s memory.
Redial Short press the Wheel
Call waiting accept/swap During an active call and one call on hold/waiting, short press
the Wheel
Conference call During an active call and one call on hold, long press the Wheel
scala-600™
11
10. Troubleshooting
Problem Action
Pairing fails
1. Delete scala-600 from the list of your paired devices onlist in
your phone (if it is listed).
2. Turn off the mobile phone and headset.
3. Take the battery out of the phone and put it back in.
4. Repeat the pairing process.
Can’t answer phone calls or
perform voice dialing
(Assuming your mobile phone supports Voice Dialing)
1. Make sure your headset is turned ON and in standby mode
while the blue light indicator flashes slowly.
2. Verify that the Bluetooth function on your phone is set to ON.
3. Verify that the scala-600 is the correctly paired headset to your
mobile phone (refer to the phone manual).
4. Link the headset to the phone as described above.
5. Check “Definitions” or “Settings” on your mobile phone.
6. Perform the pairing process and check again.
Battery does not provide at
least six hours of talk time.
1. Make sure your headset is fully charged. Charging time is up to
3 hours for an empty battery. When fully charged and charger is
connected to headset, the red light indicator turns off.
2. When not wearing the headset, make sure the CTRL button is
not pressed.
NOTE: You may have compromised the battery’s’ capacity if you
did not fully charge it prior to initial use.
Red LED does not light
steady when charger is
connected.
1. Make sure the DC jack is firmly plugged in.
2. Disconnect the DC jack, wait a few seconds and plug it back in.
3. When the headset is fully charged, the red light turns off.
Bad sound quality
1. Possibly caused by nearby interference
2. If you have a GSM phone and your headset is too close to the
phone, interference may occur.
3. Headset and mobile phone are more than 30 ft. (10 m) apart or
there are major obstacles between headset and mobile phone (e.g.
concrete walls or similar).
NOTE: For most problems we recommend that as a first step, you turn the headset off and then
on again. If this does not help, try pairing the headset and phone again.
scala-600™
12
11. Technical
Specifications
Technology Compliant with
Bluetooth®, Ver. 2.0
Maximum power 2.5 dbm
Maximum link
distance 30 feet or 10 meters
Typical talk time Up to 9.5 hours
Typical standby
time Up to one week
Typical charging
time Between 2 and 3
hours
Power Source Rechargeable
Lithium Polymer
battery
Weight 0.45 oz. or 12.5 g
Approvals FCC Part 15, CE, IC
Bluetooth®
12. FCC Notice
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment. Use only approved batteries and
chargers. This equipment has been tested and found to
comply with Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates and can radiate radio frequency
energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
Your scala-600 headset is designed to operate at the
maximum strength allowed by the FCC. This means that
your headset can communicate only over a certain
distance subject on the location of the cell phone, base
unit and headset, your vehicle, the construction and
layout of your home or office. Weather conditions can
also affect performance.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
ALERTE
Risque d'explosion si la batterie est remplacיe par un
model qui ne convient pas. Il faut traiter les batteries
usיes selon les instructions.
NOTE: If this equipment causes harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
13. European CE
Notice
Certification and Safety Approvals/ General
Information, Regulations and Notices
This product is CE marked according to the provisions
of the R & TTE Directive (99/5/EC). Hereby Cardo
Systems, Inc. declares that this product is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC. Please note that this
product uses radio frequency bands not harmonized
within the European Union (“EU”). Within the EU this
product is intended to be used in Austria, Belgium,
Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, The Netherlands, Portugal, Spain,
Sweden, The United Kingdom and within EFTA in
Iceland, Norway and Switzerland. Users are not
permitted to make changes or modify the device in any
way. Changes or modifications not expressly approved
by Cardo will void the user’s authority to operate the
equipment.
14. Limited Warranty
Your scala-600 headset is covered with a Two-Year
limited product warranty from the date of original purchase.
Please retain the retail sales receipt and your registration
data for proof of purchase.
What this limited warranty covers and for how long
Cardo Systems, Inc. (the “Company” or “Cardo“)
warrants the scala-600 headset and charger against
defects in material and workmanship under normal use
and service for a period of two (2) years from date of
purchase (proof of purchase and registration required).
The Company at its sole discretion, will at no charge
either repair, replace or refund the purchase price of the
product to the original purchaser during the warranty
period, provided the product has not been damaged or
tampered with and has been returned in accordance with
the terms of this warranty to an authorized Company
Service Center. Repair, at the Company’s option, may
include the replacement of parts, boards or batteries
with functionally equivalent reconditioned or new parts.
Warranty Conditions
This express limited warranty is extended by Cardo Systems,
Inc. solely to the original purchaser and is not assignable or
transferable to others. This is the complete warranty for your
scala-600 headset and charger. The Company assumes no
obligation or liability for additions or modifications to this
warranty unless made in writing and signed by an officer of
the Company. Batteries are warranted only if the battery
capacity falls below 70% of rated capacity or if the battery
develops leakage.
This warranty becomes void if:
a. Any of the seals on the case or battery are broken or
device or battery show signs of tampering.
b. The battery is used in equipment other than the equipment
for which it was intended.
The Company disclaims all responsibility for any equipment
not furnished by Cardo Systems Inc., which is attached to or
used in connection with the scala-600 headset. Furthermore,
the Company is not responsible for any damage to any part
of the scala-600 headset resulting from the use of ancillary
equipment not furnished by the Company.
scala-600™
13
What this warranty does not cover
1. Defects or damage resulting from the use of this product
in other than its normal and customary manner.
2. Defects or damage from misuse, accident or neglect.
3. Defects caused by improper operation, maintenance,
installation, adjustment or modification of any kind.
4. Products opened, disassembled or repaired by non-
authorized parties.
5. Defects or damage due to exposure to excessive
temperatures, adverse weather conditions, external impacts
or spills of solid or liquid substances, incl. rain.
6. All plastic surfaces and all other externally exposed parts
that are scratched or damaged after purchase.
Warranty Service
To receive warranty service, your product must be
registered. Fax the attached registration card to the
numbers listed on the card, send it by certified mail or
register online at:
http://www.cardowireless.com/registration.php For
services, please present the product, along with your
registration number and bill of sale (receipt) at any
authorized Service Center or at the store from which
you have purchased the product. Returns to the
Company pursuant to the limited warranty can only be
accepted with a Return Authorization number obtained
from Cardo’s customer service department.
General Provisions
This warranty is given in lieu of all other express or
implied warranties, including without limitation,
implied warranties of merchantability and fitness for a
particular purpose. Cardo’s obligations under this
section are limited to the duration of this limited
warranty.
a. Certain limited-life components that are subject to
normal wear and tear, such as eyeglass clips, ear loops,
decorative finishes, batteries, cradles, sleeves,
neckbands, silicone caps or other accessories, are
exempt from any warranty.
b. Cardo is not liable for any incidental or consequential
damages arising from the use or misuse of any of the
Company’s products.
c. The user should never attempt to perform service,
adjustments or repairs of the Product by him/herself.
Doing so will void all warranties. During the term of the
warranty, all products must be returned to the point of
purchase or the authorized Service Center for all
necessary work.
d. The Company is not responsible for any loss or
damage incurred during shipping. All repair work on
scala-600 products by parties not explicitly authorized
by the Company will void any and all warranties.
e. The information in this Manual is furnished strictly
for informational purposes and is subject to change
without notice. Cardo assumes no liability or
responsibility for any errors or inaccuracies that may
appear in this Manual or the Quick Guide.
NOTE: Verify that your Headset is serviced by an
Authorized Cardo Dealer or Service Center. Cardo
Systems, Inc. retains the right to amend and
change its products, manuals and specifications
at any time without notice.