COBAN Technologies FUSIONG1-WMG1 G4 Fusion User Manual Fusion Rx

COBAN Technologies, Inc. G4 Fusion Fusion Rx

User Manual

FusionUser Manual COBAN£Technologies Inc. 11375 W. Sam Houston Parkway S. # 800 Houston, TX 77031 Tel: 1-281-925-0488 Fax: 1-281-925-0535 http://www.cobantech.com
Fusion User Manual Version Q4 2013 www.cobantech.com Page 2 of 27IntroductionThe Coban Fusion mobile recorder is the front line of the Digital Video Management System (DVMS). The mobil recorder allows users to record two channels of audio and two channels of video streams simultaneously to the in-car CPU. This information is stored in the Mobile Hard Disk Drive until it can be transferred to the BOClient. This manual addresses the steps needed to properly use the Mobile recording system. Log In to the Fusion Mobile Recorder 1. After the mobile recording system has been powered up, the Mobile Start Recorder Software will initiate and display the Officer Log-In screen. Note:The officer ID should be automatically entered into the appropriate field from information input during MHDD checkout. If not, enter the appropriate Officer ID.2. Tap the Password button to display the Virtual Keypad. 3. Type your password using the Virtual Keypad then tap OK.4. Tap Login. 5. The System Time and Date screen will appear. Change the system time and date if it is incorrect using the appropriate arrow keys. 6. Take note of the estimated remaining recording time.Storage remaining for video recording is displayed above the OK button.Note:A warning prompt will be displayed if available recording time is under 4 hours. 7. Tap OK.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 3 of 27NOTE:A successful Login will show the Officer ID number on the bottom right of the Camera View screen. Minimize/Maximize the Application Window 1. Tap the application icon to minimize the window. 2. Tap Hide Camera View to minimize the application window and access the desktop.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 4 of 273. Tap the application icon to return to the Camera View Screen.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 5 of 27Camera View Screen Thisscreen displays the camera input and providesoptions for the user to start recording, create bookmarks, take snapshots of the video and other functions.It also provides iconsthatreflect the light bar status, radar gun reading, GPS indicator (if installed), and the in-carmicrophone ON / OFF status.At the bottom of this screen, it shows the Pre-EventBuffering time, which indicates the length of video that is being pre-recorded prior to User pressing theRecord button. Camera Preview Video Logs Playback Function Record ButtonsFunction Buttons Date and Time Mic Icon Buffer Setting Minimize/Enlarge Button Snapshot Function Recording Indicators Light Bar Indicator Secondary Camera View
Fusion User Manual Version Q4 2013 www.cobantech.com Page 6 of 27Camera Preview–The camera preview displays the image as seen through the camera lens. The defualt image is set as the front facing camera in most cases. For TopCam user, tap the camear view to toggle between enlarged and normal view (see page ??? for more information on this fuction.) Video Log - The Video Log documents readings and status from various devices such as, light bar status, microphone status, bookmark, etc. Snapshot Function–Tapping the snapshot icon will take a JPG freeze frame image of the video at that point in time. A preview of the snapshot will be displayed immediately beneath the snapshot icon for fifteen seconds (see page for more information on snapshot function.) Minimize/Enlarge Button – The minimize/enlarge button will minimize or enlarge the mobile recorder application and allow users the ability to access other programs on the computer. Recording Indicators–The recording indicators blink red to signify which camera is recording. If not cameras are recording the recording indicators do not blink. When there is only onecamerainstalled on the vehicle, the user will not see a C1 and C2 camera indicator. Users can tap on the recording indicators to make that cameras view active on the Camera Preview. Date and Time – The Data and Time display is set during the officer log in sequence and continuously displays the current date and time. Buffer Setting – The Pre-Event buffer is set by the System Administrator through Coban’sBOCllient application. The Pre-Event Buffer display is a reminder to the user that all recordings are provided with a set pre-event recording. This buffer can be adjusted through BOClient or in some cases through mobile recorder. Mic Icon – The wireless microphone icon will blink when the wireless microphone is recording audio. Light Bar Indicator – the light bar indicator will blink when the vehicles light bar is activated. Function Buttons–The function buttons provide users the access to greater functionality, including: The Menu button provides useraccess to Camera View, Playback,Switch User, or Exit. (Please referto Page 16 for moredetails) Bookmark Iocn – Tap the bookmark icon to set a mark in a video for ???? Auto Zoom - When pressed, will automatically zoom the camera, pause for 3 seconds and zoom back toUser’s original zoom setting. There isno need to manually disengage. Press CameraControl to access Zoom, Brightness& Focus Control. The More button allows user to access additional enhancement options.(Please refer to Page 9 for more detail) Secondary Camera View - SIf installed, will be configured asC2 (camera 2) a second image will appear below the primary camera image next to the C2 icon. Playback Functions - Allows user to playback previously recorded video, enter / edit video event data, send selected video wirelessly (if wireless option is purchased) and manually retain video. (Please referto Page 17 for moredetails) Record Buttons - User may initiate recording by pressing the wireless microphone, turning on thelight bar or siren (if equipped as a system trigger), or pressing the“RecordButtons” on thescreen. Radar SpeedReading:If installed, T=Target Speedand P=Pursuit Speed GPS Reading: If installed,GPS readingwill be displayed.
FVRTinaSNucthNwreNFusion UsVersion Q4 20RecorThe core featnitiates a recand to view vStart a Rec1. Tap trecorvideo2. Tap trecorthe vNote:If the veusercanswitccamera 3by dhevideo imagNote: Thethewhite square ecording a vNot Recordin3. The rsignifrecor4. Whilescreeby pr5. Tap trecod6. Tap tthe reser Manu13 rdingture of the mcording. The videos as thecording the camera 1rding using tho recorder. the camera 2rding using thideo recordeehiclehasthreh the displaydouble tappingedisplay. e camera 1 icwhen the moideo. g Recrecording indfy which camrding. e in recordingen provides tressing the bthe camera 1ding using ththe camera 2ecording on tual obile recordiCoban mobiy are being r1 iconhe primary ca2 icon he secondaryer. ee cameras, y betweencang on con will be sobile recordecording dicators will bmeras are actg mode, the the ability to bookmark ico1 icone primary ca2 icon the secondawwing system isle recording recorded. to begin a amera via th to begin a y camera viathe mera 2and beneath shown as a er is actively blink red to tivelypreview set bookmaron.to stop amera. to stop ry camera.ww.cobantechs its ability tosystem incohearks.com o quickly andorporates a m accurately cmultitude of ocapture videooptions to staPage7os when the art a recordin7 of 27user ng,
FVETDmoSNadNeBFusion UsVersion Q4 20Event The Event TyDVMS classifmobile recordonce the videSelect an E1. Tap tto sto2. The ENote:The Eveapproximatelydefault to the 3. Tap tthe vTypeis sel4. Tap SNote:Eventsevent type lisBOClient. ser Manu13 Typeype screen wfy the video, der system weo has been Event Typthe camera icop recoding. Event Type sent Type scry 45 second Camera Viethe appropriaideo that wa will be highllected. Select to entcan be addest by the systual will pop up imand allows mwill return tothlinked to an pecon screen will apreen will stay, then the syew screen. ate event typs recorded. Tlighted in lighter the evented or removeem administwwmmediately afmeta-data anhe Camera Vevent type. or ppear. y up for ystem will pe to classify The Event ht blue whent type. ed from the trator throughww.cobantechfter the user nd other detaView Screen n it h.com stops a videails about theandWirelesso recording. e video to besMicrophone The event te stored with ewill also retuPage8type helps ththe video. Thurn to standb8 of 27heheby
Fusion User Manual Version Q4 2013 www.cobantech.com Page 9 of 275. Tap any of the text fields to display the Virtual Keypad. 6. Type information regarding the recording using the Virtual Keypad then tapOK.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 10 of 27Snapshot Tapping the snapshot icon will take a JPG freeze frame image of the video at that point in time. A preview of the snapshot will be displayed immediately beneath the snapshot icon for fifteen seconds. Take Snapshot 1. Tap Snapshot to take a JPG freeze frame of the image on the camera view screen. 2. Tap the preview that appear beneath the snapshot icon to enlarge the snapshot. Note: The snapshot preview will be displayed for approximately 10 seconds.
FVRBBuSNuFusion UsVersion Q4 20Review Sn1. Use tsnap2. Click 3. Click BookmBookmarks ausers to quickSet a Book1. Start Tap tthe s2.An enNote: The bounless the moser Manu13 napshots the arrow keshots in the X to delete sOK to returnmark re used to mkly relocate tkmark in Ma video recothe bookmarcreen. ntry will be dookmark iconobile recordeual ys to scroll thmobile recorsnapshots. n to Camera mark points inthese significMobile Recording (see prk icon on theisplayed in tn will not be der is actively wwhrough the rder system. View screenn a video thacant points ocorder page 7) e right side ohe Video Logdisplayed recording. ww.cobantechn.t the reviewef videos duriofg..com er or user feeng a review.els are signifficant. BookmPage 11marks also al1 of 27llow
Fusion User Manual Version Q4 2013 www.cobantech.com Page 12 of 27More Functions Tap MORE to access additional enhancement options such as: - System Summary - Close Shot - View Snapshot - PreEvent Playback - Volume - Equipment Test - Sync GPS Time - Edit Event Data - Enable Live Audio - IP Address - Record Indicator - Traffic Watch - Night Mode - Color Mode - Exit Access the More Menu 1. Tap MORE from the camera preview screen. 2. Tap the appropriate button to access the additional enhancement options.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 13 of 27System Summary 1. Tap System Summary. 2. A popup window will appear that shows: - Total number of videos recorded - Total offender records entered - Recording time left Close Shot Coban’s camera is designed to focus beyond the patrol car’s windshield. This point of focus ensures that rain drops or other debris on the windshield do not negatively affect the picture. Users may use close shot mode to bring the focus point down to within one inch from the camera for 5 seconds. During this time, a snapshot will be taken for later review. 1. Position the ID or other object approximately 1Ǝ from the camera’s lens. 2. Tap Close Shot.3. The camera will re-focus and take a snapshot JPG image that will be saved in the snapshots file (see page ??? for more information on reviewing snapshots). StandardViewCloseShotView
Fusion User Manual Version Q4 2013 www.cobantech.com Page 14 of 27View Snapshots Snapshots, those taken via the snapshot function on the camera view screen or those taken utilizing the close shot function, are stored in the same place. Access these files by: 1. Tap View Snapshots. 2. Use the arrow keys to scroll through the snapshots in the mobile recorder system. 3. Click X to delete snapshots. 4. Click OK to return to Camera View screen. PreEvent Playback Following a playback the user can adjust the pre-event buffer based on the situation recorded in the video. 1. Tap PreEvent Playback. 2. Tap the left and right arrow buttons to adjust the length of the pre-event section. 3. Tap the extract button to retrieve the selected length of pre-event. This allows the user to playback and attach a longer pre-event than it is defined in the back-office system. 4. The extra length of pre-event is included in the final video. 
Fusion User Manual Version Q4 2013 www.cobantech.com Page 15 of 27Sync GPS Time User may use this button to syncvideo clock to GPS time clock if the time is off by more than 10 minutes( provided that GPS is installed on the mobile recorder system). 1. Tap Sync GPS Time.2. A popup window will appear providing the user with the difference between the system time and the GPS time. 3. Tap Yes to synchronize the system time to the GPS time. Edit Event Data Each recorded video is linked with an event type. Events can be defined as trafficstop, accident, assistance, or any other definable eventtype.Each event may have multiple data points including offender information, user activities, location description, and remarks. 1. To access the Event Data Screen, TapEdit Event Data.Note:This option willbe grayed outif the system is not recording. 2. Select the event type from the pre-defined event list. 3. Once event type is selected, the User may then start adding personal information of offenders, orselect the applicable activities. 4. Enter Case Numbers and Ticket numbers in the fields provided at the top left of the screen. 5. Tap Remarks to Enter comments regarding the video event. 6. Check the activities boxes to describe the activities taken during the video event.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 16 of 27Offender Data Screen 1. Tap to enter the offender data screen. 2. Enter offender data in the fields provided in the offender data screen. 3. Tap Save when the entries are completed. 4. Tap Violations to access the Violations Selection screen (see page 17 for more information on entering violations data). 5. Tap to access the offender data and edit data regarding the event. 6. Tap to delete offender data. 7. Tap to move offender data from one event to another. 8. Tape the field next to Location/Remark to enter text regarding the location of the video event.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 17 of 27Violation Selection Screen 1. Tap Violations in the Offender Data screen (see page 16) to access the Violation Selection screen. 2. For events where a warning or an arrest took place, check the appropriate box across from the appropriate violation. 3. For events involving druginterdiction, the Usercancheck the box in the Drug-1or Drug-2 column across from the appropriate violation. Note:Drug-1is used to indicatepersonal useof the drug; Drug-2is for other drug interdictions (such as DrugTrafficking orDealing). 4. Tap OK to return to the Offender’s Data screen. 
Fusion User Manual Version Q4 2013 www.cobantech.com Page 18 of 27Color Mode By default, color mode is enabled. There are times when it may be useful for to disable color mode in order to enhance lighting and reduce glare. 1. Tap Color Mode on the Menu screen to activate black and white preview. 2. Tap Color Mode again on the Menu screen to re-activate color mode and deactivate black and white preview.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 19 of 27Night Mode Night Mode dims the in-car monitor for clarity and providesless glare during darkened conditions. 1. Tap Night Mode to activate night mode and reduce the brightness of the monitor. 2. Tap Night Mode again to deactivate night mode and return the monitor to the default brightness settings.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 20 of 27Traffic Watch Traffic Watch allows users the ability to zoom out as soon as the record button is tapped. 1. Tap Traffic Watch to turn on the traffic watch function. 2. The screen shot on the left shows a preview where the user is focusing on the license plate of the vehicle in the frame. 3. When the video recording is activated there the camera would automatically zoom out to obtain the entire scene. IP Address 1. Tap IP Address to display the IP address of the vehicle. 2. A popup window will appear providing the IP address information. 3. Click OKto return to the Main Menu screen.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 21 of 27Playback Video The CobanBOClient is a software application used to review videos at the department once the videos are uploaded. In some cases users have found it necessary and useful to review videos in the field or immediately after recording them. The Playback feature allows users this capability to review videos from the mobile recorder system display. 1. Tap PLAYBACK on the right side of the screen to access the playback function. 2. The Video List screen will appear listing video’s stored on the MHDD by date and time taken. Location and Event will also be displayed. 3. Tap the video to play. The video will be highlighted in light green when selected. 4. Tap Play at the bottom of the screen. Note: Tap Data to access the Offender Data screen (see page 16 for more information on the Offender Data screen).
FVFusion UsVersion Q4 205. Tap 6. Tap 7. Tapspee8. Tap point9. Use tscree10. Use tright audio11. Tap returnser Manu13 to set to set to playd.to rewi.the track baren to move ththe audio chaof the screeno channels. to stopn to the Videual a bookmarka bookmark y the video aind the videor at the bottohroughout thannel buttonn to toggle op the video peo List screenwwk in the videoin the videoat double o to the startim of the e video. ns at the botton and off theplayback andn.ww.cobantecho..ng omed.com Page 222 of 27
Fusion User Manual Version Q4 2013 www.cobantech.com Page 23 of 27Switch Officer 1. Tap Menu on the right side of the screen. 2. The Officer Login screen will appear. 3. Enter the officer ID and password in the appropriate fields and Tap OK. Note: Tap the field titles, ie. Officer ID,Passwordto access the Virtual Keypad.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 24 of 27Upload Videos - Mobile Hard Disk Drive upload MHDD Upload Users must check in and check out Mobile Hard Disk Drives (MHDD) to upload videos in departments that do not utilize the wireless upload capability. 1. Tap MENU on the Camera Preview screen. 2. Place the MHDD in the upload cradle. 3. An upload popup window will appear. Enter or the serial number of the MHDD if it is not automatically entered into the field provided.4. Check the appropriate box to check out the hard disk after upload and the system will run the checkout application automatically after uploading. CAUTION: Do not remove MHDD from the cradle during the upload process. Removing the MHDD from the cradle could result in loss of data and videos.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 25 of 275. A message box will show the progress of the upload and check out process. 6. Follow the directions to safely remove the MHDD from the cradle. Exit the System The mobile recorder system is capable of automatically shutting down following the upload and processing of videos stored in the MHDD. This enables users to select the shutdown option, turn off the vehicle, and leave with the confidence of knowing the data stored on the system will not be lost. 1. Tap MENU from the Camera View screen.
Fusion User Manual Version Q4 2013 www.cobantech.com Page 26 of 272. Tap EXIT SYSTEM at the bottom of the screen. 3. Tap Shutdown or Upload & Shutdown toshutdown the mobile recorder system. Note:Upload & Shutdown will upload videos prior to shutdown (see page ᙑᎄ!ࡸآࡳᆠ஼᧘Ζfor more information on this function.) 4. The mobile recorder system will process all videos for upload. Note: In some cases the mobile recorder system must finish processing vidoes before it can properly shutdown or upload videos. The User can turn off the vehicle and leave as the movile recorder system will automatically proceed with the upload and shutdown operation once the video processing is complete. Mobile Recorder Quick Reference Guide
Fusion User Manual Version Q4 2013 www.cobantech.com Page 27 of 27FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. CAUTION: To assure continued FCC compliance: 1. Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. 2. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Label Compliance Statement:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu