CHOICE FORTUNE SC-50UK700N LED TV User Manual 1

CHOICE FORTUNE HOLDINGS LIMITED LED TV 1

Contents

User manual -1

SC-50UK700N
1En - CONTENTSImportant Safety Instructions 2Safety Information 3Preparation 4What's Included 4Front View 5Rear View 6Installing the Base Stand 7Removing the Stand for Wall-Mounting 7Remote Control 8Connecting External Devices 9Basic Operations 10Menu Operation 10PictureInitial Setup 1312Sound 1516Function Time 18 noitpO 19LOCK 20Channel 21Network SettingDigital Media Palyer 2330Introduction 26Internet30Parental Control 31Troubleshooting 33 35Limited Warranty 36Application Remote control manual 44
2En - IMPORTANT SAFETY INSTRUCTIONS• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.• Please keep the unit in a well-ventilated environment.WARNING: To reduce the risk of or electric shock, do not expose this apparatus to rain or moisture. The apparatus should not be exposed to dripping or splashing. Objects filled with liquids, such as vases should not be placed on apparatus. WARNING: The batteries shall not be exposed to excessive heat such as sunshine, or the like.WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily operable.WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer servicing to personnel.This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.• Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed. • Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.• Clean only with dry cloth.• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not into your outlet, consult an electrician for replacement of the obsolete outlet.• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.• Only use attachments/accessories by the manufacturer.• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time.
3En - SAFETY INFORMATIONTo ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below.Electrical Safety • The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product.• To prevent overload, do not share the same power supply socket with too many other electronic components.• Do not place any connecting wires where they may be stepped on or tripped over.• Do not place heavy items on any connecting wire, which may damage the wire.• Hold the main plug, not the wires, when removing from a socket.• During a thunderstorm or when not in using the television for long periods, turn off the power switch on the back of the television.• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools.• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally penetrates the ventilation slots or if the TV set does not work normally.• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit this apparatus.• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long period, or when the batteries are exhausted.• • For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.• Install only new batteries of the same type in your product.• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak.• Do not mix old and new batteries.• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel Metal Hydride) batteries.• Batteries should be recycled or disposed of as per state and local guidelines.• Do not attempt to recharge disposable batteries.• Do not short circuit battery terminals.• Keep away from children.Physical Safety • Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least 5cm (2’’) clearance all around.• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the remote control.• • Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong, the consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs. • Unplug the apparatus during lightning storms or when unused for long periods.• s required if the apparatus does not operate normally or if the apparatus, including the power supply cord or pulg, has been damaged in any way.• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.• Always connect your television to a power outlet with protective ground connection. • ation.• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.• d on the apparatus.• The use of apparatus in moderate climates.
4En - PREPARATION What's Included User ManualUser ManualQuick Start GuideQuickStart GuideRemote Control with Batteries(2*AAA)TV SetTV Stand Six Screws(4x14mm)ENTERVOL CHS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuSleepINFO
5En - PREPARATION Front View1. 2. 3. POWER Switch the TV between On / Standby mode.IR (Infrared Receiver)Receive IR signals from the remote control.POWER Indicator Illuminate red when the TV is in standby mode.
6En - PREPARATION Rear View1. Power Cord Connect to AC power outlet.2. Headphone Output Socket Connect to the Headphones.3. OPTICAL Output Connect a digital sound system to this jack.4. AUDIO Input Connect to the AUDIO(L/R) output sockets on external audio device.5. COMPOSITE/COMPONENT IN 7. 8. 6. HDMI Inputs Connect to a (HD) signal input device. Note:HDMI1 with ARC function.This item is used to turn on/off Audio Return Channel. When ARC is on,the TV can return the audio to connected HDMI device.(Amplifier,etc) DTV/TV Input Connect to the antenna (75Ω VHF/UHF) socket with the RF coaxial cable.9. USB Port Update also play photo files and video files. Connect to AV devices with composite/component (Y/Pb/Pr) video input sockets. COMPOSITE VIDEO and COMPONENT(Y/PB/PR) share with AUDIO IN (L/R).LANNetwork connection port.
7En - PREPARATION Installing the Base StandWARNING: This apparatus is intended to be supported by UL Listed wall mount bracket.• 1.Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching.• 2.Untighten the 6 pcs screws holding the stand assembly and remove them. • 3.Attach the wall-mount bracket to the TV using the mounting holes on the back of the TV. Mount this TV according to the instructions included in the wall-mount bracket. Removing the Stand for Wall-Mounting• 1. Lay the TV face-down on a flat, cushioned surface to avoid damaging or scratching. • 2.Fix the left base stand to the TV using the 3 pcs provided screws(4x14mm).• 3.Fix the right base stand assembly to the TV using the 3 pcs provided screws(4x14mm). Wall MountingYour new TV is heavy, please consult with professional wall mount installer to perform this installation. The TV is provided with mounting holes for a VESA approved wall mounting bracket (Not Supplied). Remove the screws holding the base to the base bracket and lift the base away (do not remove the base mounting brackets). Mount the VESA bracket using 4*M6 isometric threaded screws (Not Supplied). WARNINGNever place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:-Using cabinets or stands recommended by the manufacturer of the television set.-Only using furniture that can safely support the television set.-Ensuring the television set is not overhanging the edge of the supporting furniture.-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.-Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.-Educating children about the dangers of climbing on furniture to reach the television set or its controls.If your existing television set is being retained and relocated, the same considerations as above should be applied.
8En - PREPARATION Remote Control1. : Turn the TV on and off.POWER2. : This button is used to switch among Input different sources, Select a source and press ENTER button to confirm.3. : Directly select channel Digital Buttons(0-9, -) with digital buttons.4. Switch to the previous program.:5. : If network connects, press this key YouTube to view YouTube directly.6. : Press it to show channel list and favorite List list on screen.7. Press it to go to App home page.HOME: 8. : If network connects, press this key NETFLIX to view NETFLIX directly.9. : Press this key to go to quick menu. Q.MENU10. Menu: Display the main menu or exit the current menu.11. : Validation key.ENTER12. : Use to select Arrow buttons  on-screen menu items and change menu values.13. Return. Back: 14. : Exit the menu. Exit15. It's used as Color buttons: or Program Edit menu.16. : Press this button to cut off the sound of MUTEthe TV set temporarily, press again to resume. TS ree this but on to adjust TT n17. : P t S oTP.Mode：Press this button for picture settings(Vivid,Standard,Movie,Eco Save,User).S.Mode：Press this button for sound settings(Standard,Music,Movie,Sports,User).Sleep:Press this button to set the sleep timer.or off .18. : Press these buttons to adjust the VOL -+/volume. 19.: CH /Press these buttons to change channel upward or downward.20.Digital Media Player control:button Include play/pause, stop, backward, forward is used in USB mode . Please refer to relevnat instructions in the section of multimed player. 21.: Display the program information INFO .: In USB mode, press this MTS Audio/22. button to switch audio track when movie is playing. In TV mode, press this button to switch MTS or Audio Language.23.24.: Press this button to select pandorapandora application.25. 26.27.28. : Press this button to adjust CC modeCC . 1124182712101722142528821ENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenu34659121315 16201923267: Press this button to select VUDUVUDU application.
CONNECTING EXTERNAL DEVICES 9En - CONNECTING EXTERNAL DEVICESCONNECTING EXTERNAL DEVICES CONNECTING EXTERNAL DEVICESHeadphoneOR Game ConsoleBlu-ray Player / RecorderSatelliteVCR Satellite ReceiverHDMI Device HDMI Cable(not included) Digital Audio SystemOptical Cabl(not included)Video CameraRF Cable(not included)Audio Cable(not included)YPBPR Cable(not included)MINI YPBPR Cable (included)AV Cable(not included)MINI AUDIO Cable (included)
10En - Initial Setup• Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate. • In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn off.• The first time you turn the TV on, it will go into the Setup Wizard. Press buttons to select your desired mode and press ENTERBasic OperationsCountrySelect the country.USCanadaMexicoConfirmOSD languageConfig Menu language.ENTER ENTERConfirmEnglish FranciasEspañolBACKRetum[ ] ACCEPT AUTOMATIC UPDATES [ ] DECLINE ALL
11En - Initial Setup Home Mode : The picture mode will be Standard if you select this mode.Retail Mode : Select Dynamic Mode if you would like your picture to be brighter. At times this mode may use more energy to operate the Volume/Sound Mode and Picture Mode.• The SLEEP-MODE Power should be less than 0.5 W.9ENTERConfirmConnect to the internetSelect the channel inputScan ChannelsConnection DevicesSelect to connect the device.BACKRetum8765Home or StoreSelect where you will use the TV.StoreHomeDSTSelect Daylight saving time.OnOffENTERConfirmBACKRetumRetumENTERConfirmBACKTime ZoneSelect the time zone.Pacific EasternAtlanticENTERConfirmConfirmClockSelect to set the clock.ManualAutoENTER BACKRetum
12En - Basic Operations Menu OperationInput Setup2 Channels SelectionThere are four ways to select channel:1) Using number keys, and ENTER keys on the remote control to select channel directly. To select channel 90, press . When you use the number buttons, you can directly select channels that were either erased or not memorized. 2) Using CH / key on the remote control or on your TV to select channel. When you press the CH / key, the TV changes channels in sequence. You will see all the channels that the TV has memorized. You will not see channels that were either erased or not memorized. 3) Press key to return to previous channel, press it again to return to current channel. To quickly switch between two channels that are far apart, tune to one channel, then use the number keys to select the second channel. Then use the button to quickly between them. alternate is not activated if no channel has been changed after TV turning on.4) Select channels from "Channels List" or "Favorite List".Press LIST key to choose from "Channel List" menu.3 Volume Adjustment and Mute SetupVolume adjustmentPress VOL / key on the remote control or the TV to display "Volume" menu, adjust the volume of TV between 0 to 100 by using VOL / key:Input Source90ENT ER1 Press INPUT key on the remote control to enter "INPUT SOURCE" menu. There arethese options for you to select: "TV", "AV", "Component", "HDMI1", “HDMI2", “HDMI3",“USB".Use /key to select a input source and press ENTER key to confirm.Input SourceInput SourceTV HDMI 2 HDMI 3 USBAV Component HDMI 1
13En - Menu Operation4 Current Channel InformationPress “INFO” key on the remote control to view current channel information, the indications of channel information are listed in the following table.Press “EXIT” key on the remote control to exit this OSD.01/ 012005 08:Moving picture 480i 4:3480i 08:30 09:3040 To increase the volume, press VOL key; To decrease the volume, press VOL key;Mute Press “MUTE” and the sound cuts off. The MUTE icon will appear in the lower-right corner of the screen.To resume sound, press the “MUTE” button again, or simply press the key.MutePicturePictureSoundFunctionTimeOptionLockChannel1. Press MENU key to display the main menu on the screen.2. Press / key to select "Picture" option. 3. Press  key to enter "Picture" submenu. 4. You can also press the PICTURE key on the remote control to select one of the picture settings.Picture ModeYour TV has four picture settings (Vivid, Standard,Movie,Eco Save, User) that are preset at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness.1. Press / key to select "Picture Mode" option. 3. Press / key to select one picture mode.VOL14.1 ATSC-12. Press “” or "ENTER" key to confirm.
14En - Menu system instruction Picture ModeContrast 70BrightnessColorSharpnessTintBacklightColor Temperature 50 70 07550User settings for PICTURE (Contrast, Brightness, Color, Sharpness,Tint)Your set has several settings which allow you to control picture quality.1. Press ▲/▼ key to select a particular item. 2. Press / key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item. BacklightYou can Change the brightness of the entire screen according to your preference.1. Press / key to select "Backlight" option. 2. Press/ key to increace or decreace the backlight value.Color TemperatureYou can change the color of the entire screen according to your preference.1. Press / key to select "Color Temperature" option. 3. Press / key to select one color temp. Contrast: Adjusts the lightness and darkness between objects and the background.Brightness: Adjusts the brightness of the picture.Color: Adjusts the colors, making them lighter or darker.Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.Tint: Adjusts the Tint of the picture. Backlight: Adjusts the brightness of the whole screen. PictureCool: Makes whites bluish.Standard: Makes whites nature Warm: Makes whites reddish.2. Press “” or "ENTER" key to confirm.
15En - Menu system instruction Sound ModeBalanceAVLSurround SoundDigital Audio OutputAudio Language 01. Press MENU key to display the main menu on the screen.2. Press / key to select "Sound" option.3. Press  key to enter "Sound" submenu. 4. You can also press the SOUND key on the remote control to select one of the sound.Sound ModeYou can select the type of the special sound effect to be used when watching a given broadcast.Your TV has five sound settings (“Standard”, “Music”,“Movie”, “Sports”,“User”) that are preset at the factory. 1. Press / key to select "Sound Mode" option. 3. Press / key to select one sound mode. BalanceIf the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference.1. Press / key to select "Balance" option.2. Press / key to decrease or increase the value of the item. AVLEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output whenthe modulation signal is low.1. Press / key to select “AVL” option. 3. Press / key to select “On” or “Off”.Surround SoundThis is used to turn on surround sound to gain better sound effect.1. Press / key to select "Surround sound” option. 3. Press / key to select “Surround” or “Off”.1. Press / key to select " ” option. Video Description3. Press / key to select “On” or “Off”.Sound Standard: Selects the normal sound mode. Music: Provides clear and live sound for music. Movie: Provides live and full sound for movies. Sports: Emphasizes bass over other sounds. User: Selects your custom sound settings. Video DescriptionVideo DescriptionHDMI-ARC Dolby Audio Process2. Press “” or "ENTER" key to confirm.2. Press “” or "ENTER" key to confirm.2. Press “” or "ENTER" key to confirm.2. Press “” or "ENTER" key to confirm.
16En - Menu system instructionSOUNDDigital Audio OutputThis is used to . set digital audio output1. Press / key to select "Digital Audio Output” option. 3. Press / key to select “Auto” or “PCM”.Audio LanguageYou can set the primary and secondary language for audio.HDMI- ARCTurn on or turn off the HDMI- ARC function.1. Press MENU key to display the main menu on the screen.2. Press / key to select “Function” option. 3. Press key to enter “Function” submenu. Noise Reduction Press / key to select the Press / key to select the Mpeg Noise Rdeuction Noise Reduction mode. You can select the right mode to match the pictures. MPEG Noise Reduction mode: off/low/middle/high. The picture will be better when it is in “high” mode. Aspect Ratio1. Press / key to select “Aspect Ratio” option. 3. Press / key to change the size of the picture on the size of the picture on the screen. FunctionOnUserOff Dolby Audio Process Dolby Audio Process ModeSurrond VirtualizerDialog EnhancerAuto Voulme Control OffStandardHighLowOffDolby Audio ProcessYou can set on the Dolby Audio ProcessDolby Audio Process submenu.2. Press “” or "ENTER" key to confirm. 2. Press “” or "ENTER" key to confirm.Noise ReductionMPEG Noise Reduction Aspect RatioLink SetupNetflix Deactivate HDMI EDIDNetflix ESNNetflix VersionVUDU DeactivateTTS
17En - Menu system instruction Link SetupEnable linkAuto Power OnAuto StandbyOnOnOffFunctionLink Setup1. Press / key to select “Link Setup” option.2. Press ENTER or key to enter “Link Setup” submenu.Enable Link: Press /to turn on/off the link setup.Auto Power On: When this option is “On” and the TV is in standby mode. Tturn the TV at the same time.Auto Standby: When this Option is “On” and the TV is on, to turn off standby mode.TTSTTSVerbosityRate SupportPitch SupportOffLowSlowMidBetty Say1. Press “/" key to select “Netflix Deactivate" option.2. Press “” or "ENTER" key to confirm.3. Press "Yes" to confirm again, the Netflix will be activated.1. Press “This function is only used in HDMI mode./" key to select “HDMI EDID" option.2. Press “” or "ENTER" key to confirm.3. Press / key to select “ 4K” or “ 2K”.Netflix ESNDisplay the Netflix Esn information.Netflix VersionDisplay the Netflix version.1. Press “/" key to select “VUDU Deactivate" option.2. Press “” or "ENTER" key to confirm.TTSYou can set TTS information in the TTS menu.Netflix Deactivate HDMI EDIDVUDU Deactivate
18En - Off Time On Time Sleep TimerAuto SleepAuto SyncClock 08:40Time Zone 1. Press MENU key to display the main menu on the screen.2. Press / key to select "Time" option.3. Press  key to enter "Time" submenu. Off TimeIn "Off Time” item, press button or ENTER button to enter the submenu, set the day & time to turn off the TV set. On Time In "On Time” item, press button or ENTER button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control you TV set in a week.Sleep Timer1. Press / key to select "Sleep Timer" option.3. Press / key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins, 90mins, 120mins, 180mins, 240mins).Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs. Notes: When the time is less than 60 seconds, remind information will be displayed on the screen. Press any key button to cancel timer function.Auto SleepPress / key to select whether to open the No signal Power off features. If this function is opened, the TV will power off in ten minutes when there is no signal.Auto SyncYou can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the DTV signal.Clock When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.Time ZoneYou can choose it to modify your time zone in the TV set.1. Press / key to select "Time Zone" option.2. Press / key to select time zone.Menu system instructionTime2. Press “” or "ENTER" key to confirm.
19En - Menu system instruction Option1. Press MENU key to display the main menu on the screen.2. Press / key to select "Option" option. 3. Press  key to enter “Option" submenu.OSD LanguageOSD Language1. Press / key to select “ " option. 2. Press ENTER or  key to select a proper language for OSD OSD Time Set the preferred amount of time for the OSD to be displayed on the screen.Closed Caption1. Press / key to select “Closed Caption" option. 2. Press ENTER key to open CC submenu.Reset1.Press “/" key to select "Reset" option.2.Press “" or "ENTER" key to confirm.3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory setting.Network configurationPlease refer to "Network setting"behind.Software Update(USB)Internet Update CheckWhen the TV need to be updated, please copy the new software to a USB storage and inset the USB storage to TV, then operating by following steps.1.Press “/" key to select "Software Update(USB)" option.2.Press “” or "ENTER" key to confirm.1.Press “/" key to select "Internet Update Check" option.2.Press “” or "ENTER" key to confirm.Network Update Information1.Press “/" key to select "NetworkUpdate Information" option.2.Press “” or "ENTER" key to confirm.User Mode1.Press “/" key to select "User Mode" option.2.Press “3.Switch to use mode "Home" or "Store".” or "ENTER" key to confirm.3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off automaticly when updating is finish.OSD LanguageOSD Time Closed CaptionResetNetwork ConfigurationSoftware Upadate（USB） Internet Update CheckNetwork Update InformationUser Mode
20En - The "Lock" feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions can be set up or changed. 1 Lock. Press / key to select " " option. 2. Press ENTER or  key to enter " " submenu, "Enter Password" menu will appear, Lock enter your 4-digit password to enter " ” submenu Lock (the default and universal password is 0000).Lock System Set the Lock function on or off.Lock System 1. Press / key to select " " option. 3. Press / key to select "On" or "Off".Set Password Password1. Press / key to select "Set " option. 2. Enter your 4-digit password to enter enter "Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skipped to “Confirm Password” item, re-enter the same 4 digits, and your new password has been memorized. When the programs is locked, you can also press the menu key, Info key and so on. Then you can press / key to callback the input-password window.USA TVUSA TV 1. Press / key to select " " option. 2. Press ENTER key to open USA TV menu.USA MPAAUSA MPAA 1. Press / key to select " " option. 2. Press ENTER key to open USA MPAA menu.Canada EnglishCanada English 1. Press / key to select " " option. 2. Press ENTER key to open Canada English menu.Canada FrenchCanada French 1. Press / key to select " " option. 2. Press ENTER key to open Canada French menu.RRT SettingRRT Setting 1. Press / key to select " " option. 2. Press ENTER key to open RRT Setting menu.RRBlock Unrated TVT ResetRRT Seset 1. Press / key to select " " option. 2. Press ENTER key to open RRT Seset menu.Block Unrated TV1. Press / key to select " " option. 2. Press ENTER key to open Block Unrated TV menu.Menu system instructionLockPlease Enter PasswordLock SystemSet PasswordUSA TVUSA MPAACanada EnglishCanada FrenchRRT SettingRRT ResetBlock Unrated TV2. Press “” or "ENTER" key to confirm.
21En - Antenna ModeAuto Search DTV Manual Search ATV Manual Search Signal InformationBefore your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).1. Press MENU key to display the main menu on the screen.2. Press / key to select "Channel" option. 3. Press ENTER or  key to enter "Channel" submenu. Antenna Mode1.Press / key to select "Antenna" option. 2.Press / key to select "Antenna" or "CABLE"Auto Search1. Press / key to select "Auto Search" option. 2. Press  or ENTER key to confirm. then a notice window will be displayed on the screen.Select "Start" to start search or "Cancel" to cancel it.When searching, press EXIT key to exit tuning at any moment. Press MENU key to skip DTV tuning when searching DTV, skip ATV tuning when searching ATV. 3. After all the available channels are stored, the searching menu will exit.Program Edit After the program is searched, select “Program Edit” in the “Channel” menu, press “ENTER” button, program can be edited such as delete or skip according to the user's habit.Skip (Blue) ButtonThis function can help shield certain program. Program skips when selecting program by the “ / button on the TV or ” remote control.1. Select the program to be shielded in the“Program Edit”.2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of theprogram and this program is shielded.3. To cancel the Skip function, enter the channel edit menu, select the shielded program and press “Skip” (Blue) button, the skip mark at the left side of the program disappears then program is recovered.Delete (Red) ButtonThis function can help delete program.1. Select the program to be deleted in the "Program Edit".2. Press "Delete"(Red) button, the program will be deleted.Menu system instructionChannelProgram Edit514-1ATSC-114-1ATSC-214-1ATSC-350-1KOCE-HD50-2KOCE-SD50-3KOCE-LBDelete ReturnMENUSkip FavProgram Edit3. Press “” or "ENTER" key to confirm.
22En - Favorite(Yellow) buttonThis function can help store the favorite program then these programs can be quickly selected.1. Select the program which is favorite.2. Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the Program Edit is store into the Favorites.3.T o cancel the Favorite function, enter the program edit menu, select the program and press “Fav”(Yellow) button, the favorite mark at the left side of the program disappears. DTV Manual Search Enter digital number and press “ENTER” to select DTV Channel. Menu system instructionDTV Manual SearchUHF CH 40 ENTERSearchBad Normal GoodDTV 0NO SignalReturnMENUATV Manual Search 1. Press / key to select "ATV Manual Search" option. 2. Press  or ENTER key to enter submenu.Current CH 1. Press / key to select the Current CH. 2. Press / key to select current channel.Fine-Tune1. Press / key to select the Fine-Tune. 2. Press / key to select a better frequency for current channel.Signal Information(Used only in DTV)Signal Information1. Press / key to select “ " option.2. Press “ENTER”or  key ,you can see the i of the DTV channel. nformation Channel 13Name ATSC-1Modulation ATSC-VSBQuality 100Strength 100ATV Manual SearchCurrent CH 12Fine-TuneSave ReturnFrequency 205.250 MhzMENU
23En - 1.Press the “Menu” to enter, then pitch on the ”Option”,and press “ENTER” or click the right button to enter the submenu.2.Pitch on the "Network Configuration",and press "ENTER" or click right button to enter the "Network Configuration".3.When the wired network is used, if select dynamic IP address setting, pitch on the"Connect" in the "Network Configuration", then click the "Connect", and pressthe "ENTER"button to enter.If select static IP address setting,pitch on the "Manual" in the "Network configuration",then connect up the IP,Nemask,Gateway and DNS in sequence.When the connect complete,pitch on the "connect " and press the"Enter".NETWORK SETTINGPictureSoundFunctionTimeOptionLockChannelSTATUS WIFI LAN MODE: L ANFailIP: 0.0. 0.00.0. 0.00.0. 0.0DNS: GATEWAY: EXIT ExitOSD LanguageOSD Time Closed CaptionResetNetwork ConfigurationSoftware Upadate（USB） Internet Update CheckNetwork Update InformationUser Mode
24En - IP 000.0 00. 000. 000Netmask 000. 000. 0000. 000Gateway 000. 000. 000. 000DNS 000. 000. 000. 000STATUS WIFI LAN Network Configuration Au t oNetwork Setting4.If shows "Success"，the "WLAN" on the bottom right corner will turn to green fromred, and it means the network connect successfully; If shows "Fail"，it means the network can not connect, please check whether the net wire and router connect successfully or not.5. Select the "WIFI" in the Network Configuration before using WIFI connecting.STATUS WIFI LAN ConnectConnectNetwork Configuration Manual IP 000. 000. 000. 000Netmask 000. 000. 000. 000Gateway 000. 000. 000. 000DNS 000. 000. 000. 000STATUS SSID Not ConnectedPassword Network StatesIP 000. 000. 000. 000Netmask 000. 000. 000. 000Gateway 000. 000. 000. 000DNS 000. 000. 000. 000Scan APWIFI LAN Scanning... Connect
25En - Network Setting1. Press the menu button, a menu and choose "Option",under the Option menu select "Network Configuration"interface for Network connection.2. In the network interface " " " " key to switch toWIFI connection interface.3. Press the " " and " " key to select Scan for AP, scanning can connect to the AP.4. The scan is complete,and will appear a dialog”Please select wifi connection mode”.5 If you choose “Auto”,and press “ENTER”, there will be a AP list ,choose the AP will connect,press “ENTER” to confirm.6. Select "Password", there will be a small keyboard, with small keyboard input WIFI Password, input is completed in accordance with the "RETURN" on the keypad.7. Press the " " " " button with each SETTING.， 8. In step 5,if you choose “Manual”,and press “ENTER”, there will appear a new frame,in this frame ,you can usethe AP which be hidden,input the SSID and password,press “OK” to confirm.
26En - InternetPress “HOME” key to enter internet interface1. NETFLIX Use arrow key to Select button, then press “ENTER” key to enter NETFLIX.Input the right Email and password, then select “ Next” button and press“ENTER” key to login.  Use arrow button to select one video and press “ENTER” key to play. Press “MENU” key to exit playing. Use arrow key to browse the pages. press “MENU” key to return to main menu and press “EXIT” key to exit.2. Youtube Use arrow key to Select button, then press “ENTER” key to enter Youtube. Use arrow button to select one video and press “ENTER” key to play. Press key to open or close control menu when playing.121: 478：More Options4
27En - InternetPANDORAWelcome to pandoraDo you have a pandora account?I have a Pandora AccountI am new to Pandora3.VUDU Use arrow key to Select button, then press “ENTER” key to enter VUDU.4.pandora Use arrow key to Select button, Input the right Email and password, then select “login” button and press“ENTER” key to login. then press “ENTER” key to enter pandora.5.Twitter Use arrow key to Select button, then press “ENTER” key to enter Twitter. Input the right Email and password, then select “Authorize app” button and press “ENTER” key to log in.OK Enter EXIT Quit
28En - Internet Use arrow key to browse the pages. press “MENU” key to return to main menu and press “EXIT” key to exit twitter.Red key: log in or log out twitter.Green key: refresh current page.Yellow key: write new tweet.Blue key: Search tweet.6.Facebook Use arrow key to Select button, then press “ENTER” key to enter Facebook. Input the right Email and password, select “log In” button, then press “ENTER” key to log in. Press arrow key to browse the pages and press “ENTER” key to view. Press “MENU” key to return the main menu. Press “EXIT” key to exit Facebook. Red key: log in or log out Facebook.
29En - Internet7.Accuweather Use arrow key to Select button, then press “ENTER” key to enter Accuweather. Input a city or zip code press select to get the weather information. 8.ScreencastUse arrow key to Select button, then press “ENTER” key to enter Screencast.
30En - Digital Media PlayerThis TV is embedded with one USB port digital media player. It can find the devices support USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures. Play video files.Notice: 1. In order to avoid affecting the user's viewing experience, please use the better quality and shorter USB cable.2. Play, preview some of the non-standard files may appear abnormal, please understand.Explain:1. Under the USB channel，you can use only the remote control.2. Play Control menu to enter the playing surface to press the menu button pop-up menuRemote Control ButtonDescription of Buttons:IntroductionButtons FunctionAUDIOCCTrack switch (video)Subtitle switch (video)Play/PauseBackwardForwardREDYELLOW AB-Repeat (Video)Goto Time(Video)INFO Show/Hide movie info (video)ENTERVOL CHS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuSleepINFOMTS/AUDIOREDINFOCCYELLOWENTERMotion-JPEGDataPictureVideoFormatJPEG
31En - PARENTAL CONTROLPress the MENU button on the main unit or on the remote control and then press buttons to select LOCK menu. Use the 0-9 buttons to input the 4-digit password to enter the LOCK menu. If used, this option feature can "block'' undesirable programming from appearing on the TV. Parental Control offers the user a wide variety of options and settings that restrict or "block'' the programming that can appear on the TV. Parental Control allows the user to which program rating they consider acceptable for younger more sensitive viewer. It can be preset and turned either on or off by the user who the secret 4-number code, the password. The number of hours blocked are General audiences and children blocks should be both programmed into the TV's memory. Separate different viewer ratings are for both TV and the motion picture Industry; both rating systems should be used and based on the ages of children.OverviewTo ensure complete coverage for all TV programs, (movies and regular TV shows) choose a rating for MPAA, from the selections below,as well as ratings from the TV Parental Guidelines Rating Systems below, using the Age Block option for General Audiences, and for children.In addition, you may wish to add additional restrictions from the content block menu, and submenus examples below.Things to Consider before Setting up Parental ControlDetermine which rating you consider acceptable to the viewer. (For example,if you choose TV-PG, more restrictive ratings will be automatically blocked; the viewer will not be able to see: TV-PG,TV-14,or TV-MA rated programming.) You may block the auxiliary video source entirely. (Blocks the signal sent by the equipment, such as VCR, connected to the TV Audio/VIdeo Input Jacks) or remain unblocked, then choose acceptable ratings. Block program "Content" based on individual parameters such as: Strong Dialog, Bad Language, Sex Scenes,Violence Scenes or Fantasy. Violent Scenes; in Content Blk option. Select a secret password, in the Set Password option, using the numbers keys on the remote control.Save the password, it is the only way to access the Parental Control menu and change rating setting, or turn off Parental Control.• You can set different Parental Control viewing restrictions for general audiences and for children, both can be active at the same time.• Simply specifying one content block such as Sex Scenes, will not automatically restrict the programming that appears from the video sources.• Even If you choose to leave the AUX Inputs unblocked, the ratings you specify will automatically restrict the programming that appears from the video sources.• You cannot disable Parental Control by disconnecting the TV from power. Block hours will be automatically reset to the original block time setting if power is disconnected.
32En - PARENTAL CONTROL• Motion Picture Association of America (MPAA) Rating SystemGrade MeaningGGeneral Audiences Content not offensive to most viewers.PG Parental Guidance SuggestedContent is such that parents may not want their children to view the program.PG13 Parents Strongly CautionedProgram is inappropriate for preteens, with a greater degree of offensive material suggested than a PG rated program.RRestricted Not for children under 17-contains strong element of sex and/or violence.NC-17 No children under age 17Not for children under 17-under any circumstances. Contains strong sexual content.XHard Core Films Same as NC-17 rating.NR No Rating MPAA did not rate• TV Parental Guideline Rating System Grade MeaningTV-Y All Children Content not offensive to most viewers.TV-Y7 Directed to Older ChildrenConsidered suitable for children over 7- may contain fantasy violence scenes.TV-G General Audience Considered suitable for all audience; children may watch unattended.TV-PG Parental Guidance SuggestedSuggested unsuitable for younger children-may contain suggestive language, bad language, sex and violence scenes.TV-14 Parents Strongly Cautionedunsuitable for children under 14 - may contain strong language, bad language, sex, and violence scenes.TTV-NONEV-MA MatureBlock Unrated TV Audience OnlyAdults only- may contain strong language, bad language, sex, and violence scenes.Only play with levels of TV programs, shielding no levels of TV programs.Canadian Rating:Note: The V-Chlp will automatically block certain categories that are "more restrictive".If you block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category,then all the categories in the "young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA).Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).Canadian French is used in Quebec (G,8 ANS+ , 13 ANS+,16 ANS+, 18 ANS+)
33En - TROUBLESHOOTINGIf your TV does not operate normally or cannot be turned on, please check the following troubleshooting questions. Remember also to check any other connected electronic device, such as DVD or Blu-ray player to pinpoint the problem. If the TV still fails to operate normally, please contact technical support.The TV does not operate properlyThe TV does not respond when pressing any buttons• The TV may freeze up during use. Disconnect the power cord from the power socket for a few minutes. Reconnect the power cord and try to operate it again as usual.TV cannot be switched on• Check that the TV is connected to the power supply.• Make sure all connected AV devices are switched off before switching on your TV.The remote control does not work• Check to see if there are any objects between the TV and the remote control causing an obstruction. Ensure that you are pointing the remote control directly at the TV.• Ensure that the batteries are installed with the correct polarity (+ to +, - to -). • Install new batteries. Power is suddenly turned off• Check the power of the TV. The power supply maybe interrupted.• Check if the sleep timer is set.• Check whether the Auto Standby is activated. The video function does not workNo picture & No Sound• Check whether the TV is switched on.• Try another channel. The problem may be caused by the broadcaster.Picture appears slowly after switching on• This is normal; the image is muted during the TV startup process. Please contact your service centre if the picture has not appeared after minutes.No or poor color or poor picture• Adjust the settings in the PICTURE menu.• Try another channel. The problem may be caused by the broadcaster.• Check if video cables are connected properly.Horizontal/Vertical bar or picture shaking• Check for local interference such as an electrical appliance or power tool.Poor reception on some channels• The station or cable channel may be experiencing problems; tune to another station.• Station signal may be weak, reposition the antenna for better reception.• Check for sources of possible interference.Lines or streaks in pictures • Check antenna (change the position of the antenna.)No pictures when connecting HDMI • Check if the input source is HDMI1/HDMI2 .Pictures appear in wrong ratio • Adjust the Aspect Ratio settings in the FUNCTION menu.
34En - TROUBLESHOOTINGThe audio function does not workPicture OK but no sound• Press the VOL +/- buttons.• Sound muted? Press the MUTE button.• Try another channel. The problem may be caused by the broadcaster.No output from one of the speakers • Adjust the Balance settings in the AUDIO menu.Unusual sound from inside the TV• A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. No sound when connecting HDMI • Check if the input source is HDMI1/HDMI2 .Audio noise • Keep the RF coaxial cable away from the other connected cables.PasswordLost password• Select the SET Password setting in the LOCK menu, then enter the following master password “1980”. The master password clears your previous password and allows you to enter a new password. Maintaining• Do not use your TV in areas that are too hot or too cold, because the cabinet may warp or the screen may malfunction. Your TV works best in temperatures that are comfortable to you.• Storage temperatures are 32° to 122°F(0° to 50°C)• Working temperatures are 32° to 95°F(0° to 35°C)• Do not place your TV in direct sunlight or near a heat source
35En - SPECIFICATIONThe FCC Wants You to KnowFCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Panel Size 50 inch diagonally Display Type DLEDPanel Technology TFTPanel 60 Hz Vs. 120 Hz 60 HzPanel Resolution 3840 x 2160Aspect Ratio 16:9Dynamic Contrast Ratio-Panel 5000:1Brightness (Centre Typ.) Cd/M² 240~360Response Time (G To G) 8 msLamp Life (Typ. Hours) 20,000 hoursHorizontal Viewing Angle 60 Vertical Viewing Angle 60Wall-mount(LxW-mm) 400*200(mm)This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. IC warning
NETFLIX Application Remote Control Manual 36En - Application Remote control manualInput textEnter to APP HOME menuPress this button can exit NETFLIXTurn TV on or off Confirm the selectionPress these buttons to select itemsReturn to the previous stepPress this button can pop up message box to select whether exit NETFLIX or notPress these buttons to adjust volumeMute and restore soundDisplay the Video informationStart playback or pauseStop the video Select the language of the subtitles invideoENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menu
YouTube Application Remote Control Manual 37En -Application Remote control manual Press this button to exit YouTubepop up the YouTube Setting menu Enter to APP HOME menuPress this button can exit NETFLIXTurn TV on or off Confirm the selectionPress these buttons to select itemsReturn to the previous stepPress these buttons to adjust volumeMute and restore soundStart playback or pauseStop the video ENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menu
VUDU Application Remote Control Manual 38En - Application Remote control manual Enter Pandora application Enter VUDU application Enter to APP HOME menuTurn TV on or off Confirm the selectionPress these buttons to select itemsReturn to the previous stepPress these buttons to adjust volumeMute and restore soundStart playback or pauseStop the video ENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menuSelect the language of the subtitles invideoPress this button to go back to VUDU main menuPress this button to exit VUDU
Pandora Application Remote Control Manual 39En -Application Remote control manual Enter Pandora applicationPress this button to exit pandora Enter VUDU applicationEnter to APP HOME menuPress this button can exit NETFLIXTurn TV on or off Confirm the selectionPress these buttons to select itemsReturn to the previous stepPress these buttons to adjust volumeMute and restore soundStart playback or pauseStop the video ENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menuSelect the language of the subtitles invideo
Twitter Application Remote Control Manual 40En - Application Remote control manual Press this button to exit twitterRed：Change User/Green：RefreshYellow：Tweet/Blue：SearchPress this button to enter twitter main menu Enter to APP HOME menuTurn TV on or off Confirm the selectionPress these buttons to select itemsReturn to the previous stepPress these buttons to adjust volumeMute and restore soundENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menuInput text Delete function
Facebook Application Remote Control Manual 41En -Application Remote control manual Press this button to exit facebookReturn function Red：Change User/Green：Refresh Enter to APP HOME menuTurn TV on or off Confirm the selectionPress these buttons to select itemsPress these buttons to adjust volumeMute and restore soundENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menuInput text Delete function
AccuWeather Application Remote Control Manual 42En - Application Remote control manual Press this button to exit AccuWeather Enter to APP HOME menuTurn TV on or off Confirm the selectionPress these buttons to select itemsPress these buttons to adjust volumeMute and restore soundENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menuInput text Delete function
Screencast Application Remote Control Manual 43En -Application Remote control manual Return to the previous step Press this button to exit screencast Enter to APP HOME menuTurn TV on or off Confirm the selectionPress these buttons to select itemsPress these buttons to adjust volumeMute and restore soundENTERVOL CHSleepINFOS.ModeQ.MENUCC MTS/AudioTTS P.ModeListInputBack ExitMuteMenuEnter to NETFLIX ORIGINAL menu
44En - This Product (including any accessories included in the original packaging) as supplied and distributed in new condition, is warranted by SEIKI (SEIKI or the Warrantor) to the original consumer purchaser against defects in material and workmanship (“Warranty”) as follows:PARTS AND LABOR : For a period of one (1) year from date of original consumer purchase, if this Product or any functional part is determined by SEIKI, or a SEIKI authorized service provider, to be defective, at SEIKI’S sole option and discretion, SEIKI will (i) repair, at no charge to the original consumer, with new or rebuilt replacement functional parts in exchange for provide refund of original purchase price. Replacement Product or parts are warranted for either the remainder of the original warranty period or ninety (90) days from the date of replacement, whichever is longer. After the applicable Warranty periods, the purchaser must pay for all parts and labor costs.SHIPPING COSTS: Notwithstanding the foregoing, the original consumer is responsible for any shipping charges incurred to ship the Product or part(s) to SEIKI or to a SEIKI authorized customer service provider, for diagnosis, repair, replacement or refund. However, SEIKI will pay for return shipping to the customer. Products shipped back to SEIKI or a SEIKI authorized service provider must be in its original packaging or in packaging with an equal degree of protection. To obtain Warranty Service and Troubleshooting information, please call the Toll Free Customer Service Line at:8 - -Please have your model number and serial number available along with your of purchase.You can also visit us online and REGISTER your new SEIKI product at:www.SEIKI.comTo receive Warranty service, the original consumer purchaser must contact SEIKI for pre-authorization prior to sending any Product to SEIKI or a SEIKI authorized customer service provider, or for obtaining any repair, replacement or refund service. Proof of purchase in the form of a bill of sale or receipted invoice evidencing that the Product is within the applicable Warranty period(s), MUST be presented to SEIKI in order to obtain the requested service.Exclusions and Limitations:This Warranty covers manufacturing defects in materials and workmanship encountered in the normal, non-commercial use of the Product, and does not cover (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, or excess voltage or current; (b) improper or incorrectly performed repairs by non-authorized service facilities; (c) onsite consumer instruction or adjustments; (d) transportation, shipping, delivery, insurance, installation or set-up costs; (e) costs of product removal, transportation or reinstallation costs; (f) ordinary wear and to any part of the Product. In addition, this Warranty does not cover images “burnt” into the screen. This Warranty applies to the original consumer only and does not cover products sold AS IS or WITH ALL FAULTS, or consumables (e.g., fuses, batteries, bulbs etc.), and the Warranty is invalid if the factory-applied serial number has been altered or removed from the Product. This Warranty is valid only in the United States and Canada, and only applies to products purchased and serviced in the United States and Canada. All replaced parts and products, and products on which a refund is made, become the property of SEIKI.NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY. THE WARRANTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON THE WARRANTOR. REPAIR, REPLACEMENT, OR REFUND OF THE ORIGINAL PURCHASE PRICE, AT THE WARRANTOR’S SOLE DISCRETION, ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER. THE WARRANTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOTTRANSFERABLE. SEIKI RETAINS THE RIGHT TO CHANGE THIS WARRANTY AT ANY TIME WITHOUT NOTICE.Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on warranties, so which vary from state to state.Please send all correspondence to:SEIKI c/o SEIKI Customer Servicewarrantyservice@seiki.comPLEASE CONTACT CUSTOMER SERVICE TO OBTAIN SHIPPING ADDRESS FOR SERVICE.SEIKI TV’s LIMITED WARRANTY TO ORIGINAL CONSUMER

Navigation menu