CHEP ULTRA CHEP Pallet Tracker User Manual test

CHEP CHEP Pallet Tracker test

Users Manual

How is it usedUse iTraq location tracking Platform and API to:Track your valuable assetsTrack your shipmentsKey benefitsGives you peace of mind by helping you keep track of your loved ones and valuables.Has extra-long battery life (up to 4 month) on a single charge.Includes factory installed SIM card that works globally (with few exceptions). All you need is the cell phone reception in the area.PProvides accurate reporting outdoors with included GPS module.Powerful mobile applications for iTraq configuration and management.First 2000 location reports are included in price.Global location tracking devicewith the longest battery life
Longest Battery LifeOver 4 month of battery life for daily reports. Over 50 days for once an hour reports 7-10 days reporting every 10 minute.Replacing batteriesUnscrew 2 screws and open the cap. Place 14 AA batteries inside. Positive side of the batteries should be placed toward the visible springs (see picture above).GPS – with accuracy of 10-30 meters whenthe device has visibility of the GPS satellites (usually outdoors).Cell ID – cell tower triangulation technology calculates the location of the device based on the location of the nearby cell towers. Not very accurate. Based on the location of the towers can be off by few miles.Location tracking technologiesThis means that If there is no 2G/3G cell coverage, the device may know its location through GPS, but will not be able to communicate it to iTraq platform.Please note that since your phone can use many other technologies to connect (4G, CDMA, LTE) it is possible that your phone will connect from the area, while Palette device will not.Palette comes with global SIM card pre-installed. This SIM card works in most countries (except Japan and Korea). Your subscription to iTraq service includes global roaming and no extra fees required. Palette is using 2G/3G cellular technology to communicate. Connectivity
iTraq comes with 2000 location reports that have expiration time of one month. This means that once you will use 2000 location reports or one month after the device activation, you will need to have a subscription to iTraq services to continue to use iTraq. TThe count of location reports and expiration time count starts from the moment when you added iTraq to your mobile application (activated your iTraq) Annual subscription: $59/year. Monthly subscription: $5.9/month Subscriptions are non-refundable, so you will not get the pro-rated refund if you will decide to stop using your iTraq and cancel your subscription.iTraq service subscriptionUse Android app “nRF Toolbox ” to update the firmware. You will need a file with .bin extension. Please contact support@itraq.com to get it .Palette device can be updated over Bluetooth.When you switch on device for the first time by pressing the button for 3 seconds, it turns the Bluetooth on for 30 seconds.If you will look for available Bluetooth devices (from your phone) during this 2 minute interval you will see the Bluetooth device with the name tthat starts with “Chep-“Updating iTraq firmware
Power and Battery LifeBattery: 14 x AABattery charging: Not supported135 days with once a day reports45 days with once an hour reports10 days with once every 10 min reportsTrackingGPS, Cell-ID, WIFICellular communications:2G GSM, Operating Frequencies 850MHz, 900MHz, 1.8GHz, 1.9GHz3G Operating Frequencies 800/850/900/1900/2100SensorsTemperature, Light, Accelerometer, Magnetometer, Sound, Gyroscope, HumidityLocation (CellID+GPS+WiFi)Ping Data FrequencyOptimal: 60 minutesMaximum: 1440 mins (24 hours)Over-the- air updating of device settings - yesTemperature RangeStorage temperature range is -10...60C (14-140F)Operating temperature range is 0...45C (32-113F)CustomizationAt special request with orders over 5,000 units iTraq offers software and hardware platform with abilityto offer build to specs devices and applicationsSend requests to partner@itraq.comFirmware updateFirmware update over BluetoothWeight90g=3.2 OzDimensions (iTraq+)550X35X18mmCertificationsCE, FCCTechnical specifications
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu