CHANG SHIN INFOTEL SG-2000 Access Controlled Security System with zigbee&RFID; User Manual SG 2000 User Manual Eng hwp

CHANG SHIN INFOTEL CO.,LTD Access Controlled Security System with zigbee&RFID; SG 2000 User Manual Eng hwp

User Manual

사용자 매뉴얼dSG-2000User’s manual
사용자 매뉴얼dContents隌붫»ǿ隌붫»ǿ1. Screen description.1.1. Standby screen.1.2. Certification Success / Failure screen.2. administrator Card Registration2.1. administrator Card Registration.3. User Management.3.1. User Registration3.2. Delete user
User ManualSG-20001 Standby screen 1. 1 Standby screen <Figure 1> Standby screenAdministrator menuConnection StatusAttendanceTime / Date
User Manual1 Standby screen - <Figure 1> is a standby screen. <Figure 1> shows the information of the time and date, the state of waiting for authentication. Authentication methods (fingerprint, RFID, W-KEY) authentication when you attempt to do one of the screen lights up. Name descriptionDate / Time displays the time and date.Administrator menu Move to the Administrator menu.Connection Status Shows the connection to the serverAttendance Apply for Attendance.[Table 1] Function description
User Manual1 Standby screen 1. 2 Successful / failed authentication screen Successful authentication screenAuthentication failed screen
User Manual2 Administrators card registration 2. 1 Administrators card registration -Administrator card is used when a user registered in the SG-2000 series. - Registration procedure [Table 2] 순 번 설 명1Check. After the terminal installed the green LED emits light when the user information is not present.2If this check, the tagging device in the RFID card is included in the set.3If the blue LED flashes a success.[Table 2] Administrators card registration procedure - The administrator card is used for the purpose of registration. - Administrator card can apply for only one card when the stand alone. - When the network mode, look at the S/W manual.
User Manual순 번설 명1When tagging an administrator card, an RFID key card user registration status immediately. 2Register your ID3Register your password.4First fingerprint registration3. User administration 3. 1 User Registration - Registration procedure [Table 3-1] [Table 3-2]Each of the registration process‣ If the ID is registered successfully, the LED is blinking momentarily changed to blue and back to green.‣ When lead to problems with registration ID is shown in red, it LED blinking returns to green.[표 3-1] 사용자 등록 순서
User Manual3. 사용자 관리5Second fingerprint registration6Third fingerprint registration7RFID key card registration8W-Key registration9Confirmation page[표 3-2] 사용자 등록 순서 ※ Modify User, Delete and other terminal set is only available in network mode.
User Manual순 번설 명1When tagging an administrator card, an RFID key card user registration status immediately. 2When tagging an administrator card once more in the state 1 is the clear mode.3Delete All Click Delete All button4Confirmation page3. User administration 3. 2 Delete user Each of the registration process‣ If the ID is registered successfully, the LED is blinking momentarily changed to blue and back to green.‣ When lead to problems with registration ID is shown in red, it LED blinking returns to green.
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Navigation menu